CVE Feed

In the Linux kernel, the following vulnerability has been resolved: can: usb: f81604: correctly anchor the urb in the read bulk callback When submitting an urb, that is using the anchor pattern, it needs to be anchored before submitting it otherwise it could be leaked if usb_kill_anchored_urbs() is called. This logic is correctly done elsewhere in the driver, except in the read bulk callback so do that here also.

In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Fix use-after-free on error path In the error path of sev_tsm_init_locked(), the code dereferences 't' after it has been freed with kfree(). The pr_err() statement attempts to access t->tio_en and t->tio_init_done after the memory has been released. Move the pr_err() call before kfree(t) to access the fields while the memory is still valid. This issue reported by Smatch static analyser

In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix crash when destroying a suspended hardware context If userspace issues an ioctl to destroy a hardware context that has already been automatically suspended, the driver may crash because the mailbox channel pointer is NULL for the suspended context. Fix this by checking the mailbox channel pointer in aie2_destroy_context() before accessing it.

This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

In the Linux kernel, the following vulnerability has been resolved: i40e: Fix preempt count leak in napi poll tracepoint Using get_cpu() in the tracepoint assignment causes an obvious preempt count leak because nothing invokes put_cpu() to undo it: softirq: huh, entered softirq 3 NET_RX with preempt_count 00000100, exited with 00000101? This clearly has seen a lot of testing in the last 3+ years... Use smp_processor_id() instead.

In the Linux kernel, the following vulnerability has been resolved: regulator: bq257xx: Fix device node reference leak in bq257xx_reg_dt_parse_gpio() In bq257xx_reg_dt_parse_gpio(), if fails to get subchild, it returns without calling of_node_put(child), causing the device node reference leak.

In the Linux kernel, the following vulnerability has been resolved: net: vxlan: fix nd_tbl NULL dereference when IPv6 is disabled When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never initialized because inet6_init() exits before ndisc_init() is called which initializes it. If an IPv6 packet is injected into the interface, route_shortcircuit() is called and a NULL pointer dereference happens on neigh_lookup(). BUG: kernel NULL pointer dereference, address: 0000000000000380 Oops: Oops: 0000 [#1] SMP NOPTI [...] RIP: 0010:neigh_lookup+0x20/0x270 [...] Call Trace: <TASK> vxlan_xmit+0x638/0x1ef0 [vxlan] dev_hard_start_xmit+0x9e/0x2e0 __dev_queue_xmit+0xbee/0x14e0 packet_sendmsg+0x116f/0x1930 __sys_sendto+0x1f5/0x200 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x12f/0x1590 entry_SYSCALL_64_after_hwframe+0x76/0x7e Fix this by adding an early check on route_shortcircuit() when protocol is ETH_P_IPV6. Note that ipv6_mod_enabled() cannot be used here because VXLAN can be built-in even when IPv6 is built as a module.

In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix out-of-bounds memset in command slot handling The remaining space in a command slot may be smaller than the size of the command header. Clearing the command header with memset() before verifying the available slot space can result in an out-of-bounds write and memory corruption. Fix this by moving the memset() call after the size validation.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix oops due to uninitialised var in smb2_unlink() If SMB2_open_init() or SMB2_close_init() fails (e.g. reconnect), the iovs set @rqst will be left uninitialised, hence calling SMB2_open_free(), SMB2_close_free() or smb2_set_related() on them will oops. Fix this by initialising @close_iov and @open_iov before setting them in @rqst.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix NULL pointer dereference in mesh_rx_csa_frame() In mesh_rx_csa_frame(), elems->mesh_chansw_params_ie is dereferenced at lines 1638 and 1642 without a prior NULL check: ifmsh->chsw_ttl = elems->mesh_chansw_params_ie->mesh_ttl; ... pre_value = le16_to_cpu(elems->mesh_chansw_params_ie->mesh_pre_value); The mesh_matches_local() check above only validates the Mesh ID, Mesh Configuration, and Supported Rates IEs. It does not verify the presence of the Mesh Channel Switch Parameters IE (element ID 118). When a received CSA action frame omits that IE, ieee802_11_parse_elems() leaves elems->mesh_chansw_params_ie as NULL, and the unconditional dereference causes a kernel NULL pointer dereference. A remote mesh peer with an established peer link (PLINK_ESTAB) can trigger this by sending a crafted SPECTRUM_MGMT/CHL_SWITCH action frame that includes a matching Mesh ID and Mesh Configuration IE but omits the Mesh Channel Switch Parameters IE. No authentication beyond the default open mesh peering is required. Crash confirmed on kernel 6.17.0-5-generic via mac80211_hwsim: BUG: kernel NULL pointer dereference, address: 0000000000000000 Oops: Oops: 0000 [#1] SMP NOPTI RIP: 0010:ieee80211_mesh_rx_queued_mgmt+0x143/0x2a0 [mac80211] CR2: 0000000000000000 Fix by adding a NULL check for mesh_chansw_params_ie after mesh_matches_local() returns, consistent with how other optional IEs are guarded throughout the mesh code. The bug has been present since v3.13 (released 2014-01-19).

A stack-based buffer overflow vulnerability in the P2P API service in BS Producten Petcam with firmware 33.1.0.0818 allows unauthenticated attackers within network range to overwrite the instruction pointer and achieve Remote Code Execution (RCE) by sending a specially crafted HTTP request.

A buffer overflow vulnerability in the dgiot binary in LSC Smart Indoor IP Camera V7.6.32. The flaw exists in the handling of the Time Zone (TZ) parameter within the ONVIF configuration interface. The time zone (TZ) parameter does not have its length properly validated before being copied into a fixed-size buffer using the insecure strcpy function.

An issue in Eufy Homebase 2 version 3.3.4.1h allows a local attacker to obtain sensitive information via the cryptographic scheme.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix a UAF issue in bpf_trampoline_link_cgroup_shim The root cause of this bug is that when 'bpf_link_put' reduces the refcount of 'shim_link->link.link' to zero, the resource is considered released but may still be referenced via 'tr->progs_hlist' in 'cgroup_shim_find'. The actual cleanup of 'tr->progs_hlist' in 'bpf_shim_tramp_link_release' is deferred. During this window, another process can cause a use-after-free via 'bpf_trampoline_link_cgroup_shim'. Based on Martin KaFai Lau's suggestions, I have created a simple patch. To fix this: Add an atomic non-zero check in 'bpf_trampoline_link_cgroup_shim'. Only increment the refcount if it is not already zero. Testing: I verified the fix by adding a delay in 'bpf_shim_tramp_link_release' to make the bug easier to trigger: static void bpf_shim_tramp_link_release(struct bpf_link *link) { /* ... */ if (!shim_link->trampoline) return; + msleep(100); WARN_ON_ONCE(bpf_trampoline_unlink_prog(&shim_link->link, shim_link->trampoline, NULL)); bpf_trampoline_put(shim_link->trampoline); } Before the patch, running a PoC easily reproduced the crash(almost 100%) with a call trace similar to KaiyanM's report. After the patch, the bug no longer occurs even after millions of iterations.

In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-wmi-sysman: Don't hex dump plaintext password data set_new_password() hex dumps the entire buffer, which contains plaintext password data, including current and new passwords. Remove the hex dump to avoid leaking credentials.

In the Linux kernel, the following vulnerability has been resolved: nvme: fix admin queue leak on controller reset When nvme_alloc_admin_tag_set() is called during a controller reset, a previous admin queue may still exist. Release it properly before allocating a new one to avoid orphaning the old queue. This fixes a regression introduced by commit 03b3bcd319b3 ("nvme: fix admin request_queue lifetime").

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix error handling in slot reset If the device has not recovered after slot reset is called, it goes to out label for error handling. There it could make decision based on uninitialized hive pointer and could result in accessing an uninitialized list. Initialize the list and hive properly so that it handles the error situation and also releases the reset domain lock which is acquired during error_detected callback. (cherry picked from commit bb71362182e59caa227e4192da5a612b09349696)

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/userq: Do not allow userspace to trivially triger kernel warnings Userspace can either deliberately pass in the too small num_fences, or the required number can legitimately grow between the two calls to the userq wait ioctl. In both cases we do not want the emit the kernel warning backtrace since nothing is wrong with the kernel and userspace will simply get an errno reported back. So lets simply drop the WARN_ONs. (cherry picked from commit 2c333ea579de6cc20ea7bc50e9595ef72863e65c)

In the Linux kernel, the following vulnerability has been resolved: pinctrl: pinconf-generic: Fix memory leak in pinconf_generic_parse_dt_config() In pinconf_generic_parse_dt_config(), if parse_dt_cfg() fails, it returns directly. This bypasses the cleanup logic and results in a memory leak of the cfg buffer. Fix this by jumping to the out label on failure, ensuring kfree(cfg) is called before returning.

In the Linux kernel, the following vulnerability has been resolved: bpf/bonding: reject vlan+srcmac xmit_hash_policy change when XDP is loaded bond_option_mode_set() already rejects mode changes that would make a loaded XDP program incompatible via bond_xdp_check(). However, bond_option_xmit_hash_policy_set() has no such guard. For 802.3ad and balance-xor modes, bond_xdp_check() returns false when xmit_hash_policy is vlan+srcmac, because the 802.1q payload is usually absent due to hardware offload. This means a user can: 1. Attach a native XDP program to a bond in 802.3ad/balance-xor mode with a compatible xmit_hash_policy (e.g. layer2+3). 2. Change xmit_hash_policy to vlan+srcmac while XDP remains loaded. This leaves bond->xdp_prog set but bond_xdp_check() now returning false for the same device. When the bond is later destroyed, dev_xdp_uninstall() calls bond_xdp_set(dev, NULL, NULL) to remove the program, which hits the bond_xdp_check() guard and returns -EOPNOTSUPP, triggering: WARN_ON(dev_xdp_install(dev, mode, bpf_op, NULL, 0, NULL)) Fix this by rejecting xmit_hash_policy changes to vlan+srcmac when an XDP program is loaded on a bond in 802.3ad or balance-xor mode. commit 39a0876d595b ("net, bonding: Disallow vlan+srcmac with XDP") introduced bond_xdp_check() which returns false for 802.3ad/balance-xor modes when xmit_hash_policy is vlan+srcmac. The check was wired into bond_xdp_set() to reject XDP attachment with an incompatible policy, but the symmetric path -- preventing xmit_hash_policy from being changed to an incompatible value after XDP is already loaded -- was left unguarded in bond_option_xmit_hash_policy_set(). Note: commit 094ee6017ea0 ("bonding: check xdp prog when set bond mode") later added a similar guard to bond_option_mode_set(), but bond_option_xmit_hash_policy_set() remained unprotected.

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: cancel rfkill_block work in wiphy_unregister() There is a use-after-free error in cfg80211_shutdown_all_interfaces found by syzkaller: BUG: KASAN: use-after-free in cfg80211_shutdown_all_interfaces+0x213/0x220 Read of size 8 at addr ffff888112a78d98 by task kworker/0:5/5326 CPU: 0 UID: 0 PID: 5326 Comm: kworker/0:5 Not tainted 6.19.0-rc2 #2 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: events cfg80211_rfkill_block_work Call Trace: <TASK> dump_stack_lvl+0x116/0x1f0 print_report+0xcd/0x630 kasan_report+0xe0/0x110 cfg80211_shutdown_all_interfaces+0x213/0x220 cfg80211_rfkill_block_work+0x1e/0x30 process_one_work+0x9cf/0x1b70 worker_thread+0x6c8/0xf10 kthread+0x3c5/0x780 ret_from_fork+0x56d/0x700 ret_from_fork_asm+0x1a/0x30 </TASK> The problem arises due to the rfkill_block work is not cancelled when wiphy is being unregistered. In order to fix the issue cancel the corresponding work in wiphy_unregister(). Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

pf4j before 20c2f80 has a path traversal vulnerability in the extract() function of Unzip.java, where improper handling of zip entry names can allow directory traversal or Zip Slip attacks, due to a lack of proper path normalization and validation.

In the Linux kernel, the following vulnerability has been resolved: IB/mthca: Add missed mthca_unmap_user_db() for mthca_create_srq() Fix a user triggerable leak on the system call failure path.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo: split gc into unlink and reclaim phase Yiming Qian reports Use-after-free in the pipapo set type: Under a large number of expired elements, commit-time GC can run for a very long time in a non-preemptible context, triggering soft lockup warnings and RCU stall reports (local denial of service). We must split GC in an unlink and a reclaim phase. We cannot queue elements for freeing until pointers have been swapped. Expired elements are still exposed to both the packet path and userspace dumpers via the live copy of the data structure. call_rcu() does not protect us: dump operations or element lookups starting after call_rcu has fired can still observe the free'd element, unless the commit phase has made enough progress to swap the clone and live pointers before any new reader has picked up the old version. This a similar approach as done recently for the rbtree backend in commit 35f83a75529a ("netfilter: nft_set_rbtree: don't gc elements on insert").

Multiple Stored XSS vulnerabilities exist in Seafile Server version 13.0.15,13.0.16-pro,12.0.14 and prior and fixed in 13.0.17, 13.0.17-pro, and 12.0.20-pro, via the Seadoc (sdoc) editor. The application fails to properly sanitize WebSocket messages regarding document structure updates. This allows authenticated remote attackers to inject malicious JavaScript payloads via the src attribute of embedded Excalidraw whiteboards or the href attribute of anchor tags

An issue in mtrojnar Osslsigncode affected at v2.10 and before allows a remote attacker to escalate privileges via the osslsigncode.c component

In the Linux kernel, the following vulnerability has been resolved: scsi: pm8001: Fix use-after-free in pm8001_queue_command() Commit e29c47fe8946 ("scsi: pm8001: Simplify pm8001_task_exec()") refactors pm8001_queue_command(), however it introduces a potential cause of a double free scenario when it changes the function to return -ENODEV in case of phy down/device gone state. In this path, pm8001_queue_command() updates task status and calls task_done to indicate to upper layer that the task has been handled. However, this also frees the underlying SAS task. A -ENODEV is then returned to the caller. When libsas sas_ata_qc_issue() receives this error value, it assumes the task wasn't handled/queued by LLDD and proceeds to clean up and free the task again, resulting in a double free. Since pm8001_queue_command() handles the SAS task in this case, it should return 0 to the caller indicating that the task has been handled.

In the Linux kernel, the following vulnerability has been resolved: sched/deadline: Fix missing ENQUEUE_REPLENISH during PI de-boosting Running stress-ng --schedpolicy 0 on an RT kernel on a big machine might lead to the following WARNINGs (edited). sched: DL de-boosted task PID 22725: REPLENISH flag missing WARNING: CPU: 93 PID: 0 at kernel/sched/deadline.c:239 dequeue_task_dl+0x15c/0x1f8 ... (running_bw underflow) Call trace: dequeue_task_dl+0x15c/0x1f8 (P) dequeue_task+0x80/0x168 deactivate_task+0x24/0x50 push_dl_task+0x264/0x2e0 dl_task_timer+0x1b0/0x228 __hrtimer_run_queues+0x188/0x378 hrtimer_interrupt+0xfc/0x260 ... The problem is that when a SCHED_DEADLINE task (lock holder) is changed to a lower priority class via sched_setscheduler(), it may fail to properly inherit the parameters of potential DEADLINE donors if it didn't already inherit them in the past (shorter deadline than donor's at that time). This might lead to bandwidth accounting corruption, as enqueue_task_dl() won't recognize the lock holder as boosted. The scenario occurs when: 1. A DEADLINE task (donor) blocks on a PI mutex held by another DEADLINE task (holder), but the holder doesn't inherit parameters (e.g., it already has a shorter deadline) 2. sched_setscheduler() changes the holder from DEADLINE to a lower class while still holding the mutex 3. The holder should now inherit DEADLINE parameters from the donor and be enqueued with ENQUEUE_REPLENISH, but this doesn't happen Fix the issue by introducing __setscheduler_dl_pi(), which detects when a DEADLINE (proper or boosted) task gets setscheduled to a lower priority class. In case, the function makes the task inherit DEADLINE parameters of the donoer (pi_se) and sets ENQUEUE_REPLENISH flag to ensure proper bandwidth accounting during the next enqueue operation.

In the Linux kernel, the following vulnerability has been resolved: smb: client: Don't log plaintext credentials in cifs_set_cifscreds When debug logging is enabled, cifs_set_cifscreds() logs the key payload and exposes the plaintext username and password. Remove the debug log to avoid exposing credentials.

In the Linux kernel, the following vulnerability has been resolved: accel/rocket: fix unwinding in error path in rocket_probe When rocket_core_init() fails (as could be the case with EPROBE_DEFER), we need to properly unwind by decrementing the counter we just incremented and if this is the first core we failed to probe, remove the rocket DRM device with rocket_device_fini() as well. This matches the logic in rocket_remove(). Failing to properly unwind results in out-of-bounds accesses.

In the Linux kernel, the following vulnerability has been resolved: pinctrl: equilibrium: fix warning trace on load The callback functions 'eqbr_irq_mask()' and 'eqbr_irq_ack()' are also called in the callback function 'eqbr_irq_mask_ack()'. This is done to avoid source code duplication. The problem, is that in the function 'eqbr_irq_mask()' also calles the gpiolib function 'gpiochip_disable_irq()' This generates the following warning trace in the log for every gpio on load. [ 6.088111] ------------[ cut here ]------------ [ 6.092440] WARNING: CPU: 3 PID: 1 at drivers/gpio/gpiolib.c:3810 gpiochip_disable_irq+0x39/0x50 [ 6.097847] Modules linked in: [ 6.097847] CPU: 3 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.12.59+ #0 [ 6.097847] Tainted: [W]=WARN [ 6.097847] RIP: 0010:gpiochip_disable_irq+0x39/0x50 [ 6.097847] Code: 39 c6 48 19 c0 21 c6 48 c1 e6 05 48 03 b2 38 03 00 00 48 81 fe 00 f0 ff ff 77 11 48 8b 46 08 f6 c4 02 74 06 f0 80 66 09 fb c3 <0f> 0b 90 0f 1f 40 00 c3 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 [ 6.097847] RSP: 0000:ffffc9000000b830 EFLAGS: 00010046 [ 6.097847] RAX: 0000000000000045 RBX: ffff888001be02a0 RCX: 0000000000000008 [ 6.097847] RDX: ffff888001be9000 RSI: ffff888001b2dd00 RDI: ffff888001be02a0 [ 6.097847] RBP: ffffc9000000b860 R08: 0000000000000000 R09: 0000000000000000 [ 6.097847] R10: 0000000000000001 R11: ffff888001b2a154 R12: ffff888001be0514 [ 6.097847] R13: ffff888001be02a0 R14: 0000000000000008 R15: 0000000000000000 [ 6.097847] FS: 0000000000000000(0000) GS:ffff888041d80000(0000) knlGS:0000000000000000 [ 6.097847] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6.097847] CR2: 0000000000000000 CR3: 0000000003030000 CR4: 00000000001026b0 [ 6.097847] Call Trace: [ 6.097847] <TASK> [ 6.097847] ? eqbr_irq_mask+0x63/0x70 [ 6.097847] ? no_action+0x10/0x10 [ 6.097847] eqbr_irq_mask_ack+0x11/0x60 In an other driver (drivers/pinctrl/starfive/pinctrl-starfive-jh7100.c) the interrupt is not disabled here. To fix this, do not call the 'eqbr_irq_mask()' and 'eqbr_irq_ack()' function. Implement instead this directly without disabling the interrupts.

An issue in ralphje Signify before v.0.9.2 allows a remote attacker to escalate privileges via the signed_data.py and the context.py components

In the Linux kernel, the following vulnerability has been resolved: ice: change XDP RxQ frag_size from DMA write length to xdp.frame_sz The only user of frag_size field in XDP RxQ info is bpf_xdp_frags_increase_tail(). It clearly expects whole buff size instead of DMA write size. Different assumptions in ice driver configuration lead to negative tailroom. This allows to trigger kernel panic, when using XDP_ADJUST_TAIL_GROW_MULTI_BUFF xskxceiver test and changing packet size to 6912 and the requested offset to a huge value, e.g. XSK_UMEM__MAX_FRAME_SIZE * 100. Due to other quirks of the ZC configuration in ice, panic is not observed in ZC mode, but tailroom growing still fails when it should not. Use fill queue buffer truesize instead of DMA write size in XDP RxQ info. Fix ZC mode too by using the new helper.

In the Linux kernel, the following vulnerability has been resolved: af_unix: Give up GC if MSG_PEEK intervened. Igor Ushakov reported that GC purged the receive queue of an alive socket due to a race with MSG_PEEK with a nice repro. This is the exact same issue previously fixed by commit cbcf01128d0a ("af_unix: fix garbage collect vs MSG_PEEK"). After GC was replaced with the current algorithm, the cited commit removed the locking dance in unix_peek_fds() and reintroduced the same issue. The problem is that MSG_PEEK bumps a file refcount without interacting with GC. Consider an SCC containing sk-A and sk-B, where sk-A is close()d but can be recv()ed via sk-B. The bad thing happens if sk-A is recv()ed with MSG_PEEK from sk-B and sk-B is close()d while GC is checking unix_vertex_dead() for sk-A and sk-B. GC thread User thread --------- ----------- unix_vertex_dead(sk-A) -> true <------. \ `------ recv(sk-B, MSG_PEEK) invalidate !! -> sk-A's file refcount : 1 -> 2 close(sk-B) -> sk-B's file refcount : 2 -> 1 unix_vertex_dead(sk-B) -> true Initially, sk-A's file refcount is 1 by the inflight fd in sk-B recvq. GC thinks sk-A is dead because the file refcount is the same as the number of its inflight fds. However, sk-A's file refcount is bumped silently by MSG_PEEK, which invalidates the previous evaluation. At this moment, sk-B's file refcount is 2; one by the open fd, and one by the inflight fd in sk-A. The subsequent close() releases one refcount by the former. Finally, GC incorrectly concludes that both sk-A and sk-B are dead. One option is to restore the locking dance in unix_peek_fds(), but we can resolve this more elegantly thanks to the new algorithm. The point is that the issue does not occur without the subsequent close() and we actually do not need to synchronise MSG_PEEK with the dead SCC detection. When the issue occurs, close() and GC touch the same file refcount. If GC sees the refcount being decremented by close(), it can just give up garbage-collecting the SCC. Therefore, we only need to signal the race during MSG_PEEK with a proper memory barrier to make it visible to the GC. Let's use seqcount_t to notify GC when MSG_PEEK occurs and let it defer the SCC to the next run. This way no locking is needed on the MSG_PEEK side, and we can avoid imposing a penalty on every MSG_PEEK unnecessarily. Note that we can retry within unix_scc_dead() if MSG_PEEK is detected, but we do not do so to avoid hung task splat from abusive MSG_PEEK calls.

In the Linux kernel, the following vulnerability has been resolved: drbd: fix "LOGIC BUG" in drbd_al_begin_io_nonblock() Even though we check that we "should" be able to do lc_get_cumulative() while holding the device->al_lock spinlock, it may still fail, if some other code path decided to do lc_try_lock() with bad timing. If that happened, we logged "LOGIC BUG for enr=...", but still did not return an error. The rest of the code now assumed that this request has references for the relevant activity log extents. The implcations are that during an active resync, mutual exclusivity of resync versus application IO is not guaranteed. And a potential crash at this point may not realizs that these extents could have been target of in-flight IO and would need to be resynced just in case. Also, once the request completes, it will give up activity log references it does not even hold, which will trigger a BUG_ON(refcnt == 0) in lc_put(). Fix: Do not crash the kernel for a condition that is harmless during normal operation: also catch "e->refcnt == 0", not only "e == NULL" when being noisy about "al_complete_io() called on inactive extent %u\n". And do not try to be smart and "guess" whether something will work, then be surprised when it does not. Deal with the fact that it may or may not work. If it does not, remember a possible "partially in activity log" state (only possible for requests that cross extent boundaries), and return an error code from drbd_al_begin_io_nonblock(). A latter call for the same request will then resume from where we left off.

In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Fix kernel stack leak in irdma_create_user_ah() struct irdma_create_ah_resp { // 8 bytes, no padding __u32 ah_id; // offset 0 - SET (uresp.ah_id = ah->sc_ah.ah_info.ah_idx) __u8 rsvd[4]; // offset 4 - NEVER SET <- LEAK }; rsvd[4]: 4 bytes of stack memory leaked unconditionally. Only ah_id is assigned before ib_respond_udata(). The reserved members of the structure were not zeroed.

In the Linux kernel, the following vulnerability has been resolved: can: usb: etas_es58x: correctly anchor the urb in the read bulk callback When submitting an urb, that is using the anchor pattern, it needs to be anchored before submitting it otherwise it could be leaked if usb_kill_anchored_urbs() is called. This logic is correctly done elsewhere in the driver, except in the read bulk callback so do that here also.

In the Linux kernel, the following vulnerability has been resolved: net: usb: kaweth: validate USB endpoints The kaweth driver should validate that the device it is probing has the proper number and types of USB endpoints it is expecting before it binds to it. If a malicious device were to not have the same urbs the driver will crash later on when it blindly accesses these endpoints.

In the Linux kernel, the following vulnerability has been resolved: net: ipv6: fix panic when IPv4 route references loopback IPv6 nexthop When a standalone IPv6 nexthop object is created with a loopback device (e.g., "ip -6 nexthop add id 100 dev lo"), fib6_nh_init() misclassifies it as a reject route. This is because nexthop objects have no destination prefix (fc_dst=::), causing fib6_is_reject() to match any loopback nexthop. The reject path skips fib_nh_common_init(), leaving nhc_pcpu_rth_output unallocated. If an IPv4 route later references this nexthop, __mkroute_output() dereferences NULL nhc_pcpu_rth_output and panics. Simplify the check in fib6_nh_init() to only match explicit reject routes (RTF_REJECT) instead of using fib6_is_reject(). The loopback promotion heuristic in fib6_is_reject() is handled separately by ip6_route_info_create_nh(). After this change, the three cases behave as follows: 1. Explicit reject route ("ip -6 route add unreachable 2001:db8::/64"): RTF_REJECT is set, enters reject path, skips fib_nh_common_init(). No behavior change. 2. Implicit loopback reject route ("ip -6 route add 2001:db8::/32 dev lo"): RTF_REJECT is not set, takes normal path, fib_nh_common_init() is called. ip6_route_info_create_nh() still promotes it to reject afterward. nhc_pcpu_rth_output is allocated but unused, which is harmless. 3. Standalone nexthop object ("ip -6 nexthop add id 100 dev lo"): RTF_REJECT is not set, takes normal path, fib_nh_common_init() is called. nhc_pcpu_rth_output is properly allocated, fixing the crash when IPv4 routes reference this nexthop.

In the Linux kernel, the following vulnerability has been resolved: wifi: libertas: fix use-after-free in lbs_free_adapter() The lbs_free_adapter() function uses timer_delete() (non-synchronous) for both command_timer and tx_lockup_timer before the structure is freed. This is incorrect because timer_delete() does not wait for any running timer callback to complete. If a timer callback is executing when lbs_free_adapter() is called, the callback will access freed memory since lbs_cfg_free() frees the containing structure immediately after lbs_free_adapter() returns. Both timer callbacks (lbs_cmd_timeout_handler and lbs_tx_lockup_handler) access priv->driver_lock, priv->cur_cmd, priv->dev, and other fields, which would all be use-after-free violations. Use timer_delete_sync() instead to ensure any running timer callback has completed before returning. This bug was introduced in commit 8f641d93c38a ("libertas: detect TX lockups and reset hardware") where del_timer() was used instead of del_timer_sync() in the cleanup path. The command_timer has had the same issue since the driver was first written.

In the Linux kernel, the following vulnerability has been resolved: cxl/mbox: validate payload size before accessing contents in cxl_payload_from_user_allowed() cxl_payload_from_user_allowed() casts and dereferences the input payload without first verifying its size. When a raw mailbox command is sent with an undersized payload (ie: 1 byte for CXL_MBOX_OP_CLEAR_LOG, which expects a 16-byte UUID), uuid_equal() reads past the allocated buffer, triggering a KASAN splat: BUG: KASAN: slab-out-of-bounds in memcmp+0x176/0x1d0 lib/string.c:683 Read of size 8 at addr ffff88810130f5c0 by task syz.1.62/2258 CPU: 2 UID: 0 PID: 2258 Comm: syz.1.62 Not tainted 6.19.0-dirty #3 PREEMPT(voluntary) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0xab/0xe0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xce/0x650 mm/kasan/report.c:482 kasan_report+0xce/0x100 mm/kasan/report.c:595 memcmp+0x176/0x1d0 lib/string.c:683 uuid_equal include/linux/uuid.h:73 [inline] cxl_payload_from_user_allowed drivers/cxl/core/mbox.c:345 [inline] cxl_mbox_cmd_ctor drivers/cxl/core/mbox.c:368 [inline] cxl_validate_cmd_from_user drivers/cxl/core/mbox.c:522 [inline] cxl_send_cmd+0x9c0/0xb50 drivers/cxl/core/mbox.c:643 __cxl_memdev_ioctl drivers/cxl/core/memdev.c:698 [inline] cxl_memdev_ioctl+0x14f/0x190 drivers/cxl/core/memdev.c:713 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xa8/0x330 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fdaf331ba79 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fdaf1d77038 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fdaf3585fa0 RCX: 00007fdaf331ba79 RDX: 00002000000001c0 RSI: 00000000c030ce02 RDI: 0000000000000003 RBP: 00007fdaf33749df R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fdaf3586038 R14: 00007fdaf3585fa0 R15: 00007ffced2af768 </TASK> Add 'in_size' parameter to cxl_payload_from_user_allowed() and validate the payload is large enough.

In the Linux kernel, the following vulnerability has been resolved: blktrace: fix __this_cpu_read/write in preemptible context tracing_record_cmdline() internally uses __this_cpu_read() and __this_cpu_write() on the per-CPU variable trace_cmdline_save, and trace_save_cmdline() explicitly asserts preemption is disabled via lockdep_assert_preemption_disabled(). These operations are only safe when preemption is off, as they were designed to be called from the scheduler context (probe_wakeup_sched_switch() / probe_wakeup()). __blk_add_trace() was calling tracing_record_cmdline(current) early in the blk_tracer path, before ring buffer reservation, from process context where preemption is fully enabled. This triggers the following using blktests/blktrace/002: blktrace/002 (blktrace ftrace corruption with sysfs trace) [failed] runtime 0.367s ... 0.437s something found in dmesg: [ 81.211018] run blktests blktrace/002 at 2026-02-25 22:24:33 [ 81.239580] null_blk: disk nullb1 created [ 81.357294] BUG: using __this_cpu_read() in preemptible [00000000] code: dd/2516 [ 81.362842] caller is tracing_record_cmdline+0x10/0x40 [ 81.362872] CPU: 16 UID: 0 PID: 2516 Comm: dd Tainted: G N 7.0.0-rc1lblk+ #84 PREEMPT(full) [ 81.362877] Tainted: [N]=TEST [ 81.362878] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 [ 81.362881] Call Trace: [ 81.362884] <TASK> [ 81.362886] dump_stack_lvl+0x8d/0xb0 ... (See '/mnt/sda/blktests/results/nodev/blktrace/002.dmesg' for the entire message) [ 81.211018] run blktests blktrace/002 at 2026-02-25 22:24:33 [ 81.239580] null_blk: disk nullb1 created [ 81.357294] BUG: using __this_cpu_read() in preemptible [00000000] code: dd/2516 [ 81.362842] caller is tracing_record_cmdline+0x10/0x40 [ 81.362872] CPU: 16 UID: 0 PID: 2516 Comm: dd Tainted: G N 7.0.0-rc1lblk+ #84 PREEMPT(full) [ 81.362877] Tainted: [N]=TEST [ 81.362878] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 [ 81.362881] Call Trace: [ 81.362884] <TASK> [ 81.362886] dump_stack_lvl+0x8d/0xb0 [ 81.362895] check_preemption_disabled+0xce/0xe0 [ 81.362902] tracing_record_cmdline+0x10/0x40 [ 81.362923] __blk_add_trace+0x307/0x5d0 [ 81.362934] ? lock_acquire+0xe0/0x300 [ 81.362940] ? iov_iter_extract_pages+0x101/0xa30 [ 81.362959] blk_add_trace_bio+0x106/0x1e0 [ 81.362968] submit_bio_noacct_nocheck+0x24b/0x3a0 [ 81.362979] ? lockdep_init_map_type+0x58/0x260 [ 81.362988] submit_bio_wait+0x56/0x90 [ 81.363009] __blkdev_direct_IO_simple+0x16c/0x250 [ 81.363026] ? __pfx_submit_bio_wait_endio+0x10/0x10 [ 81.363038] ? rcu_read_lock_any_held+0x73/0xa0 [ 81.363051] blkdev_read_iter+0xc1/0x140 [ 81.363059] vfs_read+0x20b/0x330 [ 81.363083] ksys_read+0x67/0xe0 [ 81.363090] do_syscall_64+0xbf/0xf00 [ 81.363102] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 81.363106] RIP: 0033:0x7f281906029d [ 81.363111] Code: 31 c0 e9 c6 fe ff ff 50 48 8d 3d 66 63 0a 00 e8 59 ff 01 00 66 0f 1f 84 00 00 00 00 00 80 3d 41 33 0e 00 00 74 17 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 5b c3 66 2e 0f 1f 84 00 00 00 00 00 48 83 ec [ 81.363113] RSP: 002b:00007ffca127dd48 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 81.363120] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f281906029d [ 81.363122] RDX: 0000000000001000 RSI: 0000559f8bfae000 RDI: 0000000000000000 [ 81.363123] RBP: 0000000000001000 R08: 0000002863a10a81 R09: 00007f281915f000 [ 81.363124] R10: 00007f2818f77b60 R11: 0000000000000246 R12: 0000559f8bfae000 [ 81.363126] R13: 0000000000000000 R14: 0000000000000000 R15: 000000000000000a [ 81.363142] </TASK> The same BUG fires from blk_add_trace_plug(), blk_add_trace_unplug(), and blk_add_trace_rq() paths as well. The purpose of tracin ---truncated---

In the Linux kernel, the following vulnerability has been resolved: nfc: nci: complete pending data exchange on device close In nci_close_device(), complete any pending data exchange before closing. The data exchange callback (e.g. rawsock_data_exchange_complete) holds a socket reference. NIPA occasionally hits this leak: unreferenced object 0xff1100000f435000 (size 2048): comm "nci_dev", pid 3954, jiffies 4295441245 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 27 00 01 40 00 00 00 00 00 00 00 00 00 00 00 00 '..@............ backtrace (crc ec2b3c5): __kmalloc_noprof+0x4db/0x730 sk_prot_alloc.isra.0+0xe4/0x1d0 sk_alloc+0x36/0x760 rawsock_create+0xd1/0x540 nfc_sock_create+0x11f/0x280 __sock_create+0x22d/0x630 __sys_socket+0x115/0x1d0 __x64_sys_socket+0x72/0xd0 do_syscall_64+0x117/0xfc0 entry_SYSCALL_64_after_hwframe+0x4b/0x53

In N2W before 4.3.2 and 4.4.x before 4.4.1, there is potential remote code execution and account credentials theft because of a spoofing vulnerability.

In N2W before 4.3.2 and 4.4.0 before 4.4.1, improper validation of API request parameters enables remote code execution.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: release flowtable after rcu grace period on error Call synchronize_rcu() after unregistering the hooks from error path, since a hook that already refers to this flowtable can be already registered, exposing this flowtable to packet path and nfnetlink_hook control plane. This error path is rare, it should only happen by reaching the maximum number hooks or by failing to set up to hardware offload, just call synchronize_rcu(). There is a check for already used device hooks by different flowtable that could result in EEXIST at this late stage. The hook parser can be updated to perform this check earlier to this error path really becomes rarely exercised. Uncovered by KASAN reported as use-after-free from nfnetlink_hook path when dumping hooks.

In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_CT: drop pending enqueued packets on template removal Templates refer to objects that can go away while packets are sitting in nfqueue refer to: - helper, this can be an issue on module removal. - timeout policy, nfnetlink_cttimeout might remove it. The use of templates with zone and event cache filter are safe, since this just copies values. Flush these enqueued packets in case the template rule gets removed.

In the Linux kernel, the following vulnerability has been resolved: tracing/dma: Cap dma_map_sg tracepoint arrays to prevent buffer overflow The dma_map_sg tracepoint can trigger a perf buffer overflow when tracing large scatter-gather lists. With devices like virtio-gpu creating large DRM buffers, nents can exceed 1000 entries, resulting in: phys_addrs: 1000 * 8 bytes = 8,000 bytes dma_addrs: 1000 * 8 bytes = 8,000 bytes lengths: 1000 * 4 bytes = 4,000 bytes Total: ~20,000 bytes This exceeds PERF_MAX_TRACE_SIZE (8192 bytes), causing: WARNING: CPU: 0 PID: 5497 at kernel/trace/trace_event_perf.c:405 perf buffer not large enough, wanted 24620, have 8192 Cap all three dynamic arrays at 128 entries using min() in the array size calculation. This ensures arrays are only as large as needed (up to the cap), avoiding unnecessary memory allocation for small operations while preventing overflow for large ones. The tracepoint now records the full nents/ents counts and a truncated flag so users can see when data has been capped. Changes in v2: - Use min(nents, DMA_TRACE_MAX_ENTRIES) for dynamic array sizing instead of fixed DMA_TRACE_MAX_ENTRIES allocation (feedback from Steven Rostedt) - This allocates only what's needed up to the cap, avoiding waste for small operations Reviwed-by: Sean Anderson <[email protected]>

In the Linux kernel, the following vulnerability has been resolved: Squashfs: check metadata block offset is within range Syzkaller reports a "general protection fault in squashfs_copy_data" This is ultimately caused by a corrupted index look-up table, which produces a negative metadata block offset. This is subsequently passed to squashfs_copy_data (via squashfs_read_metadata) where the negative offset causes an out of bounds access. The fix is to check that the offset is within range in squashfs_read_metadata. This will trap this and other cases.