CVE Feed

In the Linux kernel, the following vulnerability has been resolved: xfs: fail recovery on a committed log item with no regions If the first op of a transaction is a bare transaction header (len == sizeof(struct xfs_trans_header)), xlog_recover_add_to_trans() adds an item but no region, leaving it on r_itemq with ri_cnt == 0 and ri_buf == NULL. The header can be split across op records, so later ops may still add regions; the item is only invalid if the transaction commits with none. The runtime commit path never emits such a transaction, so this only happens on a crafted log. It came from an AI-assisted code audit of the recovery parser. xlog_recover_reorder_trans() calls ITEM_TYPE() on the item, which reads *(unsigned short *)item->ri_buf[0].iov_base and faults on the NULL ri_buf. Reject it there, before the commit handlers that also read ri_buf[0]. KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:xlog_recover_reorder_trans (fs/xfs/xfs_log_recover.c:1836) xlog_recover_commit_trans (fs/xfs/xfs_log_recover.c:2043) xlog_recover_process_data (fs/xfs/xfs_log_recover.c:2501) xlog_do_recovery_pass (fs/xfs/xfs_log_recover.c:3244) xlog_recover (fs/xfs/xfs_log_recover.c:3493) xfs_log_mount (fs/xfs/xfs_log.c:618) xfs_mountfs (fs/xfs/xfs_mount.c:1034) xfs_fs_fill_super (fs/xfs/xfs_super.c:1938) vfs_get_tree (fs/super.c:1695) path_mount (fs/namespace.c:4161) __x64_sys_mount (fs/namespace.c:4367)

Cross Site Scripting vulnerability in fuint Member Marketing System <=v1.0 allows a remote attacker to execute arbitrary code via the ClientMessageController.java file

An issue in FileThingie v.2.5.7 allows a remote attacker to obtain sensitive information via the ft2.php component.

HAProxy Community Edition 3.0 through 3.3 before 3.3.3 lacks a length check for the NEW_TOKEN format. HAProxy Enterprise and ALOHA are also affected.

In the Linux kernel, the following vulnerability has been resolved: net/sched: dualpi2: fix GSO backlog accounting When DualPI2 splits a GSO skb into N segments, it propagates N additional packets to its parent before returning NET_XMIT_SUCCESS. The parent then accounts for the original skb once more, leaving its qlen one larger than the number of packets actually queued. With QFQ as the parent, after all real packets are dequeued, QFQ still has a non-zero qlen while its in-service aggregate has no active classes. qfq_choose_next_agg() returns NULL and qfq_dequeue() passes the result to qfq_peek_skb(), causing a NULL pointer dereference. Follow the same pattern used by tbf_segment() and taprio: count only successfully queued segments, propagate the difference between the original skb and those segments, and return NET_XMIT_SUCCESS whenever at least one segment was queued.

CI4MS is a CodeIgniter 4-based content management system skeleton. Prior to version 0.31.9.0, the custom `html_purify` validation rule used to sanitize blog post bodies relies on by-reference mutation (`?string &$str`), but CodeIgniter 4's validator passes a local copy of the value, so the sanitized text is silently discarded. The Blog controller writes `$lanData['content']` directly into `blog_langs.content`, and the public template echoes it without escaping — yielding stored XSS executable in any visitor's browser, including the superadmin when previewing or editing posts. Version 0.31.9.0 patches the issue.

Meshtastic is an open source mesh networking solution. Prior to version 2.7.23.b246bcd, a single node advertising a User.long_name that contains a malformed character encoding can render other radios unusable over BLE when managed through the iOS app. The malformed name does not need to be maliciously crafted — it can arise from ordinary buffer truncation and has been observed occurring naturally in the wild. At least one code path could place a null terminator in the middle of a multibyte sequence, leaving a malformed User.long_name in the node database. The problem surfaced downstream: the iOS app enforced encoding validation and therefore cannot parse a node database once it contains a poisoned entry. This caused BLE sync to enter a fail/retry loop, resulting in loss of control over the affected device. For a typical user managing their radio with the iOS app, the device becomes effectively unusable until the poisoned node ages out of the on-device database, or unless they have an alternate management path (e.g., the Python CLI, which can be used to identify and remove the offending entries manually). Because the malformed name propagates through the mesh, the temporary presence of a single affected node can degrade BLE management for iOS users across a wide geographical area for an extended period. Less technical users have no straightforward recovery path. Starting in version 2.7.23.b246bcd, the firmware has added input sanitization and regression tests demonstrating recovery for already-poisoned devices. The apps have also taken steps to ensure more graceful handling of malformed encoding sequences as well.

Meshtastic is an open source mesh networking solution. Prior to version 2.7.21.1370b23, the Meshtastic GitHub repository's main_matrix.yml workflow is triggered by pull_request_target and multiple jobs check out the attacker's fork code and execute it with access to repository secrets and elevated GITHUB_TOKEN permissions. No approval gate exists. Pull requests from external users with author_association: "NONE" triggered the CI workflow automatically. The workflow directly executes attacker-controlled files from the fork checkout. This issue could have resulted in supply chain compromise, self-hosted runner compromise, and/or repository takeover for the repo. This issue is separate from GHSA-6mwm-v2vv-pp96, which addressed a command injection via github.head_ref in the setup job of the same workflow. That fix correctly moved to environment variables. However, the more critical fork checkout vulnerability across the check, build, and build-debian-src jobs was not addressed. Version 2.7.21.1370b23 contains a patch for thie issue.

A vulnerability in keras-team/keras version 3.15.0 allows unsafe deserialization of attacker-controlled PyTorch pickle data through the public `keras.layers.TorchModuleWrapper.from_config` method. This method invokes `torch.load(..., weights_only=False)` without requiring an explicit unsafe opt-in, such as a `safe_mode=False` parameter. When called outside a `SafeModeScope(True)` context, the absence of an ambient safe mode state permits unsafe deserialization by default. This issue can lead to arbitrary code execution if untrusted Keras layer configurations are processed using this method. The vulnerability arises because the method does not enforce safe deserialization practices unless explicitly guarded by Keras safe mode.

Impact: fast-uri versions from 2.3.1 through 4.1.0 (including the 3.x line up to 3.1.3 and the 2.x line up to 2.4.2) do not treat a literal backslash character (U+005C) as an authority delimiter. Node's native WHATWG URL parser, used by fetch, undici, and Node's http and https clients, normalizes the backslash to a forward slash for special schemes such as http, https, ws, wss, ftp, and file. As a result, the two parsers extract different hosts from the same input string. Applications that use fast-uri to enforce host-based policy such as allowlists, denylists, loopback or SSRF filtering, redirect validation, or outbound proxy routing before passing the same URL into Node's URL or fetch consumers can be steered to an unintended destination, including cloud metadata endpoints, loopback, or internal hosts. Patches: upgrade to fast-uri 4.1.1, 3.1.4, or 2.4.3. Workarounds: none.

In the Linux kernel, the following vulnerability has been resolved: ASoC: rsnd: Fix potential out-of-bounds access of component_dais[] component_dais[RSND_MAX_COMPONENT] is initially zero-initialized and later populated in rsnd_dai_of_node(). However, the existing boundary check: if (i >= RSND_MAX_COMPONENT) does not guarantee that the last valid element remains zero. As a result, the loop can rely on component_dais[RSND_MAX_COMPONENT] being zero, which may lead to an out-of-bounds access. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: net: ena: PHC: Check return code before setting timestamp output ena_phc_gettimex64() is setting the output parameter regardless of whether ena_com_phc_get_timestamp() succeeded or failed. When ena_com_phc_get_timestamp() returns an error, the timestamp parameter may contain uninitialized stack memory (e.g., when PHC is disabled or in blocked state) or invalid hardware values. Passing these to userspace via the PTP ioctl is both a security issue (information leak) and a correctness bug. Fix by checking the return code after releasing the lock and only setting the output timestamp on success.

In the Linux kernel, the following vulnerability has been resolved: batman-adv: tp_meter: avoid divide-by-zero for dec_cwnd The cwnd is always MSS <= cwnd <= 0x20000000. But the calculation in batadv_tp_update_cwnd() assumes unsigned 32 bit arithmetics. ((mss * 8) ** 2) / (cwnd * 8) In case cwnd is actually 0x20000000, it will be shifted by 3 bit to the left end up at 0x100000000 or U32_MAX + 1. It will therefore wrap around and be 0 - resulting in: ((mss * 8) ** 2) / 0 This is of course invalid and cannot be calculated. The calculation should must be simplified to avoid this overflow: (mss ** 2) * 8 / cwnd It will keep the precision enhancement from the scaling (by 8) but avoid the overflow in the divisor. In theory, there could still be an overflow in the dividend. It is at the moment fixed to BATADV_TP_PLEN in batadv_tp_recv_ack() - so it is not an imminent problem. But allowing it to use the whole u32 bit range, would mean that it can still use up to 67 bits. To keep this calculation safe for 32 bit arithmetic, mss must never use more than floor((32 - 3) / 2) bits - or in other words: must never be larger than 16383.

In the Linux kernel, the following vulnerability has been resolved: batman-adv: v: prevent OGM aggregation on disabled hardif When an interface gets disabled, the worker is correctly disabled by batadv_hardif_disable_interface() -> ... -> batadv_v_ogm_iface_disable(). In this process, the skb aggr_list is also freed. But batadv_v_ogm_send_meshif() can still queue new skbs (via batadv_v_ogm_queue_on_if()) to the aggr_list. This will only stop after all cores can no longer find the RCU protected list of hard interfaces. These queued skbs will never be freed or consumed by batadv_v_ogm_aggr_work. The batadv_v_ogm_iface_disable() function must block batadv_v_ogm_queue_on_if() to avoid leak of skbs.

In the Linux kernel, the following vulnerability has been resolved: batman-adv: tp_meter: restrict number of unacked list entries When the unacked_list is unbound, an attacker could send messages with small lengths and appropriated seqno + gaps to force the receiver to allocate more and more unacked_list entries. And the end either causing an out-of-memory situation or increase the management overhead for the (large) list that significant portions of CPU cycles are wasted in searching through the list. When limiting the list to a specific number, it is important to still correctly add a new entry to the list. But if the list became larger than the limit, the last entry of the list (with the highest seqno) must be dropped to still allow the earlier seqnos to finish and therefore to continue the process. Otherwise, the process might get stuck with too high seqnos which are not handled by batadv_tp_ack_unordered().

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix warning when unbinding If there is an error during some initialization related to firmware, the buffers dp->tx_ring[i].tx_status are released. However this is released again when the device is unbinded (ath11k_pci), and we get: WARNING: CPU: 0 PID: 6231 at mm/slub.c:4368 free_large_kmalloc+0x57/0x90 Call Trace: free_large_kmalloc ath11k_dp_free ath11k_core_deinit ath11k_pci_remove ... The issue is always reproducible from a VM because the MSI addressing initialization is failing. In order to fix the issue, just set the buffers to NULL after releasing in order to avoid the double free.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: usb: fix memory leaks on USB write failures When rtw_usb_write_port() fails to submit a USB Request Block (URB) (e.g., due to device disconnect or ENOMEM), the completion callback is never executed. Currently, the driver ignores the return value of rtw_usb_write_port() in rtw_usb_write_data() and rtw_usb_tx_agg_skb(). Because these functions rely on the completion callback to free the socket buffers (skbs) and the transaction control block (txcb), a submission failure results in: 1. A memory leak of the allocated skb in rtw_usb_write_data(). 2. A memory leak of the txcb structure and all aggregated skbs in rtw_usb_tx_agg_skb(). Fix this by checking the return value of rtw_usb_write_port(). If it fails, explicitly free the skb in rtw_usb_write_data(), and properly purge the tx_ack_queue and free the txcb in rtw_usb_tx_agg_skb(). The issue was discovered in practice during device disconnect/reconnect scenarios and memory pressure conditions. Tested by verifying normal TX operation continues after the fix without regressions.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on f2fs_get_node_folio_ra() kernel BUG at fs/f2fs/file.c:845! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 0 PID: 5336 Comm: syz.0.0 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:f2fs_do_truncate_blocks+0x1115/0x1140 fs/f2fs/file.c:845 Code: fc fc 90 0f 0b e8 8b 9d 9a fd 90 0f 0b e8 83 9d 9a fd 48 89 df 48 c7 c6 60 d1 1a 8c e8 54 f1 fc fc 90 0f 0b e8 6c 9d 9a fd 90 <0f> 0b e8 64 9d 9a fd 90 0f 0b 90 e9 93 fd ff ff e8 56 9d 9a fd 90 RSP: 0018:ffffc9000e4474c0 EFLAGS: 00010283 RAX: ffffffff842b1d34 RBX: 0000000000000003 RCX: 0000000000100000 RDX: ffffc9000f03a000 RSI: 0000000000035503 RDI: 0000000000035504 RBP: ffffc9000e447608 R08: ffff8880123b0000 R09: 0000000000000002 R10: 00000000fffffffe R11: 0000000000000002 R12: 0000000000000001 R13: 0000000000000000 R14: 1ffff92001c88ea0 R15: 00000000ffff039c FS: 00007f7e02ee36c0(0000) GS:ffff88808c887000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ff0305c4000 CR3: 0000000012d4c000 CR4: 0000000000352ef0 Call Trace: <TASK> f2fs_truncate_blocks+0x10a/0x300 fs/f2fs/file.c:882 f2fs_truncate+0x471/0x7c0 fs/f2fs/file.c:940 f2fs_evict_inode+0xa3f/0x1ac0 fs/f2fs/inode.c:907 evict+0x61e/0xb10 fs/inode.c:841 f2fs_fill_super+0x5f43/0x78f0 fs/f2fs/super.c:5224 get_tree_bdev_flags+0x431/0x4f0 fs/super.c:1694 vfs_get_tree+0x92/0x2a0 fs/super.c:1754 fc_mount fs/namespace.c:1193 [inline] do_new_mount_fc fs/namespace.c:3758 [inline] do_new_mount+0x341/0xd30 fs/namespace.c:3834 do_mount fs/namespace.c:4167 [inline] __do_sys_mount fs/namespace.c:4383 [inline] __se_sys_mount+0x31d/0x420 fs/namespace.c:4360 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x15f/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f count = ADDRS_PER_PAGE(dn.node_folio, inode); count -= dn.ofs_in_node; f2fs_bug_on(sbi, count < 0); The fuzz test will trigger above bug_on in f2fs. The root cause should be: in the corrupted inode, there is a direct node which has the same ino and nid in its footer, so in f2fs_do_truncate_blocks(), after f2fs_get_dnode_of_data() finds such dnode: 1) ADDRS_PER_PAGE(dn.node_folio, inode) will return 923 2) once dn.ofs_in_node points to addr[923, 1017] Then it will trigger the system panic. Let's introduce NODE_TYPE_NON_IXNODE to indicate current node should not be an inode or xattr node, and then use it in below path to detect inconsistent node chain in inode mapping table: - f2fs_do_truncate_blocks - f2fs_get_dnode_of_data - f2fs_get_node_folio_ra - __get_node_folio - f2fs_sanity_check_node_footer - case NODE_TYPE_NON_IXNODE -> check whether it is inode|xnode

In the Linux kernel, the following vulnerability has been resolved: f2fs: validate ACL entry sizes in f2fs_acl_from_disk() f2fs_acl_count() only validates the aggregate ACL xattr length. A malformed ACL can still place ACL_USER or ACL_GROUP in a slot that only contains struct f2fs_acl_entry_short bytes, and f2fs_acl_from_disk() then reads entry->e_id before verifying that a full entry fits. Require a short entry before reading e_tag and e_perm, and require a full entry before reading e_id for ACL_USER and ACL_GROUP. Return -EFSCORRUPTED from these new truncated-entry checks, while keeping the pre-existing -EINVAL paths unchanged. Validation reproduced this kernel report: KASAN slab-out-of-bounds in __f2fs_get_acl+0x6fb/0x7e0 RIP: 0033:0x7f4b835ea7aa The buggy address belongs to the object at ffff888114589960 which belongs to the cache kmalloc-8 of size 8 The buggy address is located 0 bytes to the right of allocated 8-byte region [ffff888114589960, ffff888114589968) Read of size 4 Call trace: dump_stack_lvl+0x66/0xa0 (?:?) print_report+0xce/0x630 (?:?) __f2fs_get_acl+0x6fb/0x7e0 (fs/f2fs/acl.c:169) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x224/0x430 (?:?) kasan_report+0xe0/0x110 (?:?) __f2fs_get_acl+0x5/0x7e0 (fs/f2fs/acl.c:169) __get_acl+0x281/0x380 (?:?) vfs_get_acl+0x10b/0x190 (?:?) do_get_acl+0x2a/0x410 (?:?) do_get_acl+0x9/0x410 (?:?) do_getxattr+0xe8/0x260 (?:?) filename_getxattr+0xd1/0x140 (?:?) do_getname+0x2d/0x2d0 (?:?) path_getxattrat+0x16c/0x200 (?:?) lock_release+0xc8/0x290 (?:?) cgroup_update_frozen+0x9d/0x320 (?:?) lockdep_hardirqs_on_prepare+0xea/0x1a0 (?:?) trace_hardirqs_on+0x1a/0x170 (?:?) _raw_spin_unlock_irq+0x28/0x50 (?:?) do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?)

In the Linux kernel, the following vulnerability has been resolved: crypto: nx - fix nx_crypto_ctx_exit argument nx_crypto_ctx_shash_exit calls nx_crypto_ctx_exit with crypto_shash_ctx(...) but crypto_shash_ctx gives a nx_crypto_ctx *, not a crypto_tfm *. Fix the type in nx_crypto_ctx_exit and drop the bogus crypto_tfm_ctx call. This fixes the following oops: BUG: Unable to handle kernel data access at 0xc0403effffffffc8 Faulting instruction address: 0xc000000000396cb4 Oops: Kernel access of bad area, sig: 11 [#15] Call Trace: nx_crypto_ctx_shash_exit+0x24/0x60 crypto_shash_exit_tfm+0x28/0x40 crypto_destroy_tfm+0x98/0x140 crypto_exit_ahash_using_shash+0x20/0x40 crypto_destroy_tfm+0x98/0x140 hash_release+0x1c/0x30 alg_sock_destruct+0x38/0x60 __sk_destruct+0x48/0x2b0 af_alg_release+0x58/0xb0 __sock_release+0x68/0x150 sock_close+0x20/0x40 __fput+0x110/0x3a0 sys_close+0x48/0xa0 system_call_exception+0x140/0x2d0 system_call_common+0xf4/0x258 .. which came from hardlink(1) opportunistically using AF_ALG. The same problem exists with nx_crypto_ctx_skcipher_exit getting a context it wasn't expecting, but apparently nobody hit that for years.

In the Linux kernel, the following vulnerability has been resolved: sched/mmcid: Fix OOB clear_bit when CID is MM_CID_UNSET in fixup path In mm_cid_fixup_cpus_to_tasks(), when rq->curr has the target mm and mm_cid.active is set, the CID is checked with cid_in_transit() before setting the transition bit. In per-CPU mode a newly forked or exec'd task can be running with mm_cid.cid == MM_CID_UNSET because CIDs are assigned lazily on schedule-in. With cid_in_transit() the guard passes for MM_CID_UNSET (no transit bit), converts it to MM_CID_UNSET | MM_CID_TRANSIT and stores it back; later mm_cid_schedout() feeds this to clear_bit() with MM_CID_UNSET as the bit number, triggering an out-of-bounds write. Symptoms: this is genuine memory corruption, but a bounded out-of-bounds write, not an arbitrary one. MM_CID_UNSET is the fixed sentinel BIT(31), so once the bad value reaches mm_cid_schedout() the cid_from_transit_cid() strip leaves MM_CID_UNSET, which fails the "cid < max_cids" convergence test and falls into mm_drop_cid() -> clear_bit(MM_CID_UNSET, mm_cidmask(mm)). The cid bitmap is embedded in the mm_struct slab object (after cpu_bitmap and mm_cpus_allowed) and is only num_possible_cpus() bits wide, so clearing bit 31 is a deterministic OOB bit-clear at a fixed offset of 2^31 / 8 == 256 MiB past the bitmap base. The address is not attacker-influenced (fixed sentinel -> fixed offset) and the op only clears a single bit; what sits 256 MiB further along the direct map is whatever kernel object happens to live there, so this corrupts one bit of unpredictable kernel memory -- it is not an arbitrary-address or arbitrary-value write. It triggers only in per-CPU CID mode, when a CPU is running an active task of the target mm whose cid is still MM_CID_UNSET -- the fork()/execve() window before that task's next schedule-in assigns it a real CID -- and a per-CPU -> per-task fixup walks over it (the mode fallback driven by a thread exit, sched_mm_cid_exit(), or by the deferred max_cids recompute in mm_cid_work_fn()). In practice syzkaller surfaced it as a KASAN use-after-free reported in __schedule -> mm_cid_switch_to, where the offending clear_bit() is inlined via mm_cid_schedout() -> mm_drop_cid(). Guard the transition-bit assignment against MM_CID_UNSET, in addition to the existing cid_in_transit() check, so the bit is only set on a genuine task-owned CID. A CPU-owned (MM_CID_ONCPU) CID of a running active task is handled by the cid_on_cpu(pcp->cid) branch above and never reaches this path, so excluding MM_CID_UNSET (and the already-transitioning case) is sufficient.

In the Linux kernel, the following vulnerability has been resolved: irqchip/imgpdc: Fix resource leak, add missing chained handler cleanup on remove The driver allocates domain generic chips using irq_alloc_domain_generic_chips() during probe and sets up chained handlers using irq_set_chained_handler_and_data(). However, on driver removal, the generic chips are not freed and the chained handlers are not removed. The generic chips remain on the global gc_list and may later be accessed by generic interrupt chip suspend, resume, or shutdown callbacks after the driver has been removed, potentially resulting in a use-after-free and kernel crash. The chained handlers that were installed in probe for peripheral and syswake interrupts are also left dangling, which can lead to spurious interrupts accessing freed memory. Fix these issues by: - Setting IRQ_DOMAIN_FLAG_DESTROY_GC flag in domain->flags, so the core code automatically removes generic chips when irq_domain_remove() is called - Clearing all chained handlers with NULL in pdc_intc_remove()

In the Linux kernel, the following vulnerability has been resolved: ntfs: serialize volume label accesses Protect vol->volume_label with a mutex and snaphost the label before copy_to_user. This prevent a use-after-free when FS_IOC_SETFSLABEL replaces the vol->volume_label and FS_IOC_GETTSLABEL reads it concurrently.

In the Linux kernel, the following vulnerability has been resolved: nfsd: fix posix_acl leak and ignored error in nfsd4_create_file nfsd4_create_file() has two bugs in its ACL handling: The return value of nfsd4_acl_to_attr() is silently discarded. When the NFSv4-to-POSIX ACL conversion fails (e.g., -EINVAL for unsupported ACE types), the file is created without any ACL and the client receives NFS4_OK. This violates RFC 7530/8881 which require the server to reject unsupported attributes on CREATE. When start_creating() fails after ACL attributes have been populated in attrs (either via nfsd4_acl_to_attr or via ownership transfer from open->op_dpacl/op_pacl), the function jumps to out_write which skips nfsd_attrs_free(). The posix_acl allocations are leaked. A client can trigger this repeatedly with OPEN(CREATE), ACL attributes, and an invalid filename (e.g., longer than NAME_MAX). Fix both by capturing the nfsd4_acl_to_attr() return value and by changing the early error paths to jump to out instead of out_write. Initialize child to ERR_PTR(-EINVAL) so that end_creating() is safe to call even if start_creating() was never reached.

In the Linux kernel, the following vulnerability has been resolved: nfsd: fix dead ACL conflict guard in nfsd4_create nfsd4_create() steals create->cr_dpacl/cr_pacl into the local nfsd_attrs via the designated initializer, then immediately sets the source pointers to NULL. The subsequent conflict guard tests the already-nilled source fields, making it permanently dead code: if (create->cr_acl) { if (create->cr_dpacl || create->cr_pacl) /* always false */ When a client encodes both FATTR4_WORD0_ACL and FATTR4_WORD2_POSIX_{DEFAULT,ACCESS}_ACL in the same CREATE fattr bitmap, nfsd4_acl_to_attr() overwrites attrs.na_pacl/na_dpacl without releasing the originals, leaking two posix_acl slab objects per request. Repeated requests cause unbounded slab exhaustion. Fix by checking attrs.na_dpacl/na_pacl (the stolen values) instead of the nilled create->cr_dpacl/cr_pacl, matching the correct pattern already used in nfsd4_setattr().

In the Linux kernel, the following vulnerability has been resolved: net/tcp-ao: fix use-after-free of key in del_async path In tcp_ao_delete_key(), the del_async path skips the current_key and rnext_key validity checks present in the synchronous path, assuming these pointers are always NULL on LISTEN sockets. However, if a key was added with set_current=1/set_rnext=1 while the socket was in CLOSE state, current_key and rnext_key will be non-NULL after listen() transitions the socket to LISTEN. When such a key is deleted with del_async=1, hlist_del_rcu() and call_rcu() free the key without clearing the dangling pointers. After the RCU grace period, getsockopt(TCP_AO_INFO) dereferences current_key->sndid and rnext_key->rcvid from freed slab memory. Clear current_key and rnext_key in the del_async path when they reference the key being deleted.

In the Linux kernel, the following vulnerability has been resolved: iio: light: veml6075: add bounds check to veml6075_it_ms index veml6075_it_ms has 5 elements but VEML6075_CONF_IT can yield values 0-7. If it returns a value >= 5, this causes an out-of-bounds array access. Add a bounds check and return -EINVAL if the index is out of range. The problem values are reserved so should never be read from the register. Hence this is hardening against fault device, missprogramming or bus corruption.

In the Linux kernel, the following vulnerability has been resolved: iio: adc: ti-ads1298: add bounds check to pga_settings index ads1298_pga_settings has 7 elements but ADS1298_MASK_CH_PGA can yield values 0-7. If it yields a value >= 7, this causes an out-of-bounds array access. Add a bounds check and return -EINVAL if the index is out of range. Note that the remaining value b111 is reserved so should not be seen in a correctly functioning system.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: reject non-VALID session in compound request branch smb2_check_user_session() takes a shortcut for any operation that is not the first in a COMPOUND request: it reuses work->sess (the session bound by the first operation) and validates only the SessionId, then returns "valid". It never re-checks work->sess->state == SMB2_SESSION_VALID, and a SessionId of 0xFFFFFFFFFFFFFFFF (ULLONG_MAX, the MS-SMB2 related-operation value) skips even the id comparison. The standalone path (ksmbd_session_lookup_all() plus the SESSION_SETUP state machine) does enforce the VALID state; the compound branch bypasses all of it. A SESSION_SETUP carrying only an NTLM Type-1 (NtLmNegotiate) blob publishes a fresh SMB2_SESSION_IN_PROGRESS session whose sess->user is still NULL (->user is assigned later, by ntlm_authenticate()). Used as operation 1 of a COMPOUND with operation 2 = TREE_CONNECT (related, SessionId=ULLONG_MAX, \\host\IPC$), the tree-connect then runs on that IN_PROGRESS session and reaches ksmbd_ipc_tree_connect_request(), which dereferences user_name(sess->user) with sess->user == NULL (transport_ipc.c:687/701/704) -> remote NULL-pointer dereference and a kernel Oops that wedges the ksmbd worker for all clients. Reject any non-first compound operation that lands on a session which is not SMB2_SESSION_VALID, mirroring the validity the standalone lookup path enforces. SESSION_SETUP itself legitimately runs on an IN_PROGRESS session, but it is never carried as a non-first compound operation, so multi-leg authentication is unaffected by this check.

In the Linux kernel, the following vulnerability has been resolved: media: vidtv: fix NULL pointer dereference in vidtv_mux_push_si syzbot reported a general protection fault in vidtv_psi_ts_psi_write_into [1]. vidtv_mux_get_pid_ctx() can return NULL, but vidtv_mux_push_si() does not check for this before dereferencing the returned pointer to access the continuity counter. This leads to a general protection fault when accessing a near-NULL address. The root cause is that vidtv_mux_pid_ctx_init() does not check the return value of vidtv_mux_create_pid_ctx_once() for PMT section PIDs. If the allocation fails, the PID context is never created, but init returns success. The subsequent vidtv_mux_push_si() call then gets NULL from vidtv_mux_get_pid_ctx() and crashes. Fix both the root cause (add error check in vidtv_mux_pid_ctx_init for PMT PIDs) and add defensive NULL checks in vidtv_mux_push_si for all vidtv_mux_get_pid_ctx() calls. [1] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] Workqueue: events vidtv_mux_tick RIP: 0010:vidtv_psi_ts_psi_write_into+0x54a/0xbc0 drivers/media/test-drivers/vidtv/vidtv_psi.c:197 Call Trace: <TASK> vidtv_psi_table_header_write_into drivers/media/test-drivers/vidtv/vidtv_psi.c:799 [inline] vidtv_psi_pmt_write_into+0x3b2/0xa70 drivers/media/test-drivers/vidtv/vidtv_psi.c:1231 vidtv_mux_push_si+0x932/0xe80 drivers/media/test-drivers/vidtv/vidtv_mux.c:196 vidtv_mux_tick+0xe9b/0x1480 drivers/media/test-drivers/vidtv/vidtv_mux.c:408

In the Linux kernel, the following vulnerability has been resolved: media: rzv2h-ivc: Fix concurrent buffer list access The list of buffers (`rzv2h_ivc::buffers.queue`) is protected by a spinlock (`rzv2h_ivc::buffers.lock`). However, in `rzv2h_ivc_transfer_buffer()`, which runs in a separate workqueue, the `list_del()` call is executed without holding the spinlock, which makes it possible for the list to be concurrently modified Fix that by removing a buffer from the list in the lock protected section. [assign ivc->buffers.curr in critical section as reported by Barnabas]

In the Linux kernel, the following vulnerability has been resolved: media: i2c: ov8856: free control handler on error in ov8856_init_controls() The control handler wasn't freed if adding controls failed, add an error exit label and convert the existing error return to use it.

In the Linux kernel, the following vulnerability has been resolved: mm/vma: do not try to unmap a VMA if mmap_prepare() invoked from mmap() The mmap_prepare hook functionality includes the ability to invoke mmap_prepare() from the mmap() hook of existing 'stacked' drivers, that is ones which are capable of calling the mmap hooks of other drivers/file systems (e.g. overlayfs, shm). As part of the mmap_prepare action functionality, we deal with errors by unmapping the VMA should one arise. This works in the usual mmap_prepare case, as we invoke this action at the last moment, when the VMA is established in the maple tree. However, the mmap() hook passes a not-fully-established VMA pointer to the caller (which is the motivation behind the mmap_prepare() work), which is detached. So attempting to unmap a VMA in this state will be problematic, with the most obvious symptom being a warning in vma_mark_detached(), because the VMA is already detached. It's also unncessary - the mmap() handler will clean up the VMA on error. So to fix this issue, this patch propagates whether or not an mmap action is being completed via the compatibility layer or directly. If the former, then we do not attempt VMA cleanup, if the latter, then we do. This patch also updates the userland VMA tests to reflect the change.

A flaw has been found in itsourcecode Courier Management System up to 1.0. Affected by this vulnerability is an unknown functionality of the file /index.php. Executing a manipulation of the argument page can lead to cross site scripting. It is possible to launch the attack remotely. The exploit has been published and may be used.

A vulnerability was detected in SourceCodester Class and Exam Timetabling System 1.0. Affected is an unknown function of the file /edit_schoolyr.php. Performing a manipulation of the argument ID results in sql injection. It is possible to initiate the attack remotely. The exploit is now public and may be used.

A security vulnerability has been detected in SourceCodester Class and Exam Timetabling System 1.0. This impacts an unknown function of the file /edit_subject.php. Such manipulation of the argument ID leads to sql injection. The attack may be performed from remote. The exploit has been disclosed publicly and may be used.

In the Linux kernel, the following vulnerability has been resolved: RDMA/ionic: bound node_desc sysfs read with %.64s node_desc[64] in struct ib_device is not guaranteed to be NUL- terminated. The core IB sysfs handler uses "%.64s" for exactly this reason (drivers/infiniband/core/sysfs.c:1307), since node_desc_store() performs a raw memcpy of up to IB_DEVICE_NODE_DESC_MAX bytes with no NUL termination: memcpy(desc.node_desc, buf, min_t(int, count, IB_DEVICE_NODE_DESC_MAX)); If exactly 64 bytes are written via the node_desc sysfs file, the array contains no NUL byte. The ionic hca_type_show() handler uses unbounded "%s" and will read past the end of node_desc into adjacent fields of struct ib_device until it encounters a NUL. ionic supports IB_DEVICE_MODIFY_NODE_DESC, so this is triggerable by userspace. Match the core handler and bound the format specifier.

In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel: Improve validation and configuration of ACR masks Currently there are several issues on the user space ACR mask validation and configuration. - The validation for user space ACR mask (attr.config2) is incomplete, e.g., the ACR mask could include the index which belongs to another ACR events group, but it's not validated. - An early return on an invalid ACR mask caused all subsequent ACR groups to be skipped. - The stale hardware ACR mask (hw.config1) is not cleared before setting new hardware ACR mask. The following changes address all of the above issues. - Figure out the event index group of an ACR group. Any bits in the user-space mask not present in the index group are now dropped. - Instead of an early return on invalid bits, drop only the invalid portions and continue iterating through all ACR events to ensure full configuration. - Explicitly clear the stale hardware ACR mask for each event prior to writing the new configuration. Besides, a non-leader event member of ACR group could be disabled in theory. This could cause bit-shifting errors in the acr_mask of remaining group members. But since ACR sampling requires all events to be active, this should not be a big concern in real use case. Add a "FIXME" comment to notice this risk.

In the Linux kernel, the following vulnerability has been resolved: selinux: fix avdcache auditing The per-task avdcache was incorrectly saving and reusing the audited vector computed by avc_audit_required() rather than recomputing based on the currently requested permissions and distinguishing the denied versus allowed cases. As a result, some permission checks were not being audited, e.g. directory write checks after a previously cached directory search check. [PM: line wrap tweaks]

A weakness has been identified in SourceCodester Pizzafy Ecommerce System 1.0. This affects the function save_settings of the file /admin/admin_class_novo.php. This manipulation of the argument img causes unrestricted upload. The attack is possible to be carried out remotely.

A security flaw has been discovered in davenardella snap7 up to 1.4.3. The impacted element is the function TSnap7Peer::NegotiatePDULength of the file src/core/s7_peer.cpp. The manipulation of the argument PDULength results in out-of-bounds write. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks.

A vulnerability was identified in jxxghp MoviePilot up to 2.13.5. The affected element is an unknown function of the file /jxxghp/MoviePilot of the component Application API. The manipulation leads to improper authorization. Remote exploitation of the attack is possible. The identifier of the patch is dc2b6910a423b3bfadeffaa303e1ba75cfb33900. Applying a patch is the recommended action to fix this issue.

A vulnerability was determined in 1Panel-dev CordysCRM up to 1.4.1. Impacted is the function getSqlBotSrc of the file backend/crm/src/main/java/cn/cordys/crm/system/service/IntegrationConfigService.java of the component Third Party Edit Endpoint. Executing a manipulation of the argument appSecret can lead to server-side request forgery. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized.

A vulnerability was found in 1Panel-dev CordysCRM up to 1.4.1. This issue affects some unknown processing of the file backend/crm/src/main/java/cn/cordys/crm/integration/sso/service/TokenService.java of the component Third Party Endpoint. Performing a manipulation of the argument mkAddress results in server-side request forgery. The attack may be initiated remotely. The exploit has been made public and could be used. The project closed the issue report, stating that this is not the official way to report a security vulnerability.

A vulnerability has been found in code-projects Online Examination System 1.0. This vulnerability affects unknown code of the file /account.php?q=quiz. Such manipulation of the argument eid/n/t leads to cross site scripting. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A flaw has been found in Croogo CMS up to 4.0.7. This affects the function FileManager::isEditable of the file FileManager/src/Utility/FileManager.php of the component Admin File Manager. This manipulation causes path traversal. The attack can be initiated remotely. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet.

A vulnerability was detected in hunvreus devpush up to 0.4.6. Affected by this issue is the function reset_storage of the file app/workers/tasks/storage.py of the component Storage Reset Failure Handler. The manipulation results in improper check or handling of exceptional conditions. A high complexity level is associated with this attack. The exploitation is known to be difficult. The project was informed of the problem early through an issue report but has not responded yet.

A security vulnerability has been detected in guohongze adminset up to 0.61. Affected by this vulnerability is an unknown functionality of the file delivery/deli.py of the component Delivery Deployment Endpoint. The manipulation of the argument project_id leads to authorization bypass. It is possible to initiate the attack remotely. The exploit has been disclosed publicly and may be used. The project was informed of the problem early through an issue report but has not responded yet.

A weakness has been identified in geex-arts django-jet up to 1.0.8. Affected is an unknown function of the component OAuth Handler. Executing a manipulation can lead to cross-site request forgery. The attack may be performed from remote. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet.

A security flaw has been discovered in geex-arts django-jet up to 1.0.8. This impacts an unknown function of the component OAuth Credential Revoke Handler. Performing a manipulation results in missing authorization. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through an issue report but has not responded yet.