CVE Feed

In the Linux kernel, the following vulnerability has been resolved: USB: serial: mxuport: fix memory corruption with small endpoint Make sure that the bulk-out endpoint max packet size is at least eight bytes to avoid user-controlled slab corruption should a malicious device report a smaller size.

In the Linux kernel, the following vulnerability has been resolved: USB: serial: keyspan: fix missing indat transfer sanity check Add the missing sanity check on the size of usa49wg indat transfers to avoid parsing stale or uninitialised slab data.

In the Linux kernel, the following vulnerability has been resolved: USB: serial: cypress_m8: validate interrupt packet headers cypress_read_int_callback() parses the interrupt-in buffer according to the selected Cypress packet format. Format 1 has a two-byte status/count header and format 2 has a one-byte combined status/count header. The usb-serial core sizes the interrupt-in buffer from the endpoint descriptor's wMaxPacketSize, and successful interrupt transfers can complete short when URB_SHORT_NOT_OK is not set. Check that the completed packet contains the selected header before reading it. Malformed short reports are ignored and the interrupt URB is resubmitted through the existing retry path, preventing out-of-bounds header-byte reads. KASAN report as below: KASAN slab-out-of-bounds in cypress_read_int_callback+0x240/0x7f0 Read of size 1 Call trace: cypress_read_int_callback() (drivers/usb/serial/cypress_m8.c:1009) __usb_hcd_giveback_urb() dummy_timer() [ johan: use constants in header length sanity checks ]

In the Linux kernel, the following vulnerability has been resolved: usb: usbtmc: check URB actual_length for interrupt-IN notifications USBTMC devices can use an optional interrupt endpoint for notification messages. These typically contain two-byte headers indicating the payload format, but the driver does not check if these headers are present before accessing the data buffers. In cases where the URB actual_length is not enough to fit these headers, the driver will either cause an out-of-bounds read, or consume stale leftover data from a previous notification. Fix by checking if actual_data contains enough bytes for the headers, otherwise resubmit URB to the interrupt endpoint.

In the Linux kernel, the following vulnerability has been resolved: usbip: vudc: Fix use after free bug in vudc_remove due to race condition This patch follows up Zheng Wang's 2023 report of a use-after-free in vudc_remove(). The original thread stalled on Shuah Khan's request for runtime testing of the unplug/unbind path. This patch supplies that testing and keeps Zheng's original fix shape. In vudc_probe(), v_init_timer() binds udc->tr_timer.timer to v_timer(). usbip_sockfd_store() starts the timer via v_start_timer()/v_kick_timer(). vudc_remove() can then free the containing struct vudc while the timer is still pending or executing. KASAN confirms the race on an unpatched x86_64 QEMU guest with CONFIG_KASAN=y, CONFIG_USBIP_VUDC=y, CONFIG_USB_ZERO=y, and a tight loop that repeatedly writes a socket fd to usbip_sockfd, closes the socket pair, and unbinds/rebinds usbip-vudc.0: BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x8ba/0x8e0 Write of size 8 at addr ffff888001b80740 by task trigger_and_unb/239 Allocated by task 239: vudc_probe+0x4d/0xaa0 Freed by task 239: kfree+0x18f/0x520 device_release_driver_internal+0x388/0x540 unbind_store+0xd9/0x100 This lands in the timer core rather than v_timer() itself because the embedded timer_list is being walked after its containing struct vudc has already been freed. The underlying lifetime bug is the same one Zheng reported. With v_stop_timer() called from vudc_remove() and the timer deleted synchronously, the same harness completed 5000 bind/unbind iterations with no KASAN report.

In the Linux kernel, the following vulnerability has been resolved: usb: musb: omap2430: Fix use-after-free in omap2430_probe() In omap2430_probe(), of_node_put(np) is called prematurely before the last access to np, leading to a use-after-free if the node's reference count drops to zero. Move the of_node_put() calls after the last use of np in both the success and error paths.

In the Linux kernel, the following vulnerability has been resolved: USB: serial: omninet: fix memory corruption with small endpoint Make sure that the bulk-out buffers are at least as large as the hardcoded transfer size to avoid user-controlled slab corruption should a malicious device report a smaller endpoint max packet size than expected.

In the Linux kernel, the following vulnerability has been resolved: uio: uio_pci_generic_sva: fix double free of devm_kzalloc() memory uio_pci_sva allocates struct uio_pci_sva_dev with devm_kzalloc() in probe(), but then calls kfree(udev) both on the probe() error path (label out_free) and again in remove(). Because devm_kzalloc() allocations are devres-managed and are freed automatically when the device is detached (including after a failing probe() and during driver unbind), the explicit kfree() can lead to a double free. If probe() fails after devm_kzalloc(), the error path frees udev and devres cleanup will free it again when the core unwinds the partially bound device. On normal driver removal, remove() frees udev and devres will free it again when the device is detached. This issue was identified by a static analysis tool I developed and confirmed by manual review. Fix by removing the manual kfree() calls and dropping the now-unused label.

In the Linux kernel, the following vulnerability has been resolved: Input: atmel_mxt_ts - fix boundary check in mxt_prepare_cfg_mem When a configuration file provides an object size that is larger than the driver's known mxt_obj_size(object), the driver intends to discard the extra bytes. The loop iterates using for (i = 0; i < size; i++). Inside the loop, the condition to skip processing extra bytes is: if (i > mxt_obj_size(object)) continue; Since i is a 0-based index, the valid indices for the object are 0 through mxt_obj_size(object) - 1. When i == mxt_obj_size(object), the condition evaluates to false, and the code processes the byte instead of discarding it. This causes the code to calculate byte_offset = reg + i - cfg->start_ofs and writes the byte there, overwriting exactly one byte of the adjacent instance or object. Update the boundary check to skip extra bytes correctly by using >=.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: OOB read regression in smb_check_perm_dacl() ACE-walk loops Commit d07b26f39246 ("ksmbd: require minimum ACE size in smb_check_perm_dacl()") introduced a transposed bounds check: if (offsetof(struct smb_ace, sid) + aces_size < CIFS_SID_BASE_SIZE) Since offsetof(..sid) is 8 and CIFS_SID_BASE_SIZE is 8, this evaluates to `aces_size < 0`. Because `aces_size` is always non-negative, this check becomes dead code and never breaks the loop. Worse, that commit removed the old 4-byte guard, meaning the loop now reads `ace->size` (offset 2) even when `aces_size` is 0-3 bytes. This re-opens a 2-byte heap out-of-bounds (OOB) read past the pntsd allocation during subsequent SMB2_CREATE operations. Fix this by properly transposing the comparison to require at least 16 bytes (8-byte offset + 8-byte SID base), matching the correct form used in smb_inherit_dacl().

In the Linux kernel, the following vulnerability has been resolved: dma-buf: fix UAF in dma_buf_fd() tracepoint Once FD_ADD() returns, the fd is live in the file descriptor table and a thread sharing that table can close() it before DMA_BUF_TRACE() runs. The close drops the last reference, __fput() frees the dma_buf, and the tracepoint then dereferences dmabuf to take dmabuf->name_lock -- slab-use-after-free. Split FD_ADD() back into get_unused_fd_flags() + fd_install() and emit the tracepoint between them. While the fdtable slot is reserved with a NULL file pointer, a racing close() returns -EBADF without entering __fput(), so the dma_buf stays alive across the trace. Same approach as commit 2d76319c4cbb ("dma-buf: fix UAF in dma_buf_put() tracepoint"). This undoes the FD_ADD() conversion done in commit 34dfce523c90 ("dma: convert dma_buf_fd() to FD_ADD()"); FD_ADD() has no place to hook the tracepoint safely.

In the Linux kernel, the following vulnerability has been resolved: iio: buffer: Fix DMA fence leak in iio_buffer_enqueue_dmabuf() iio_buffer_enqueue_dmabuf() allocates a struct iio_dma_fence (104 bytes, kmalloc-128) via kmalloc_obj()+dma_fence_init(), which sets the initial kref to 1. It then calls dma_resv_add_fence() which takes a second reference (kref=2), and stores a raw pointer in block->fence. On the success path the function returns without calling dma_fence_put() to release the initial reference, so every buffer enqueue permanently leaks one kmalloc-128 allocation. The iio_buffer_cleanup() work item only releases the temporary reference taken during completion signalling by iio_buffer_signal_dmabuf_done(); the initial reference from dma_fence_init() is never released. With four iio_rwdev instances at 240kHz and 512 samples per buffer, this produces ~1875 kmalloc-128 allocations per second matching the observed slab growth exactly. A test with ftrace confirmed that the dma_fence_destroy event was never triggered. Fix by calling dma_fence_put() after dma_resv_add_fence(), transferring ownership of the fence to the DMA reservation object. The DMA fence then gets properly discarded after being signalled.

In the Linux kernel, the following vulnerability has been resolved: iio: buffer: hw-consumer: fix use-after-free in error path In the err_put_buffers cleanup path of iio_hw_consumer_alloc(), the code was using list_for_each_entry() to iterate through buffers while calling iio_buffer_put() which can free the current buffer if refcount drops to 0. The list_for_each_entry() loop macro then evaluates buf->head.next to continue iteration, accessing the freed buffer. Fix this by using list_for_each_entry_safe().

In the Linux kernel, the following vulnerability has been resolved: iio: chemical: scd30: fix division by zero in write_raw Add a zero check for val2 before using it as a divisor when setting the sampling frequency. A user writing a zero fractional part to the sampling_frequency sysfs attribute triggers a division by zero in the kernel.

In the Linux kernel, the following vulnerability has been resolved: iio: chemical: mhz19b: reject oversized serial replies mhz19b_receive_buf() appends each serdev chunk into the fixed MHZ19B_CMD_SIZE receive buffer and advances buf_idx by len without checking that the chunk fits in the remaining space. A large callback can therefore overflow st->buf before the command path validates the reply. Reset the reply state before each command and reject oversized serial replies before copying them into the fixed buffer. When an oversized reply is detected, wake the waiter and report -EMSGSIZE instead of overwriting st->buf.

In the Linux kernel, the following vulnerability has been resolved: iio: gyro: adis16260: fix division by zero in write_raw Add a validation check for the sampling frequency value before using it as a divisor. A user writing zero to the sampling_frequency sysfs attribute triggers a division by zero in the kernel.

In the Linux kernel, the following vulnerability has been resolved: iio: adc: nxp-sar-adc: fix division by zero in write_raw Add a validation check for the sampling frequency value before using it as a divisor. A user writing zero or a negative value to the sampling_frequency sysfs attribute triggers a division by zero in the kernel. Also prevent unsigned integer underflow when the computed cycle count is smaller than NXP_SAR_ADC_CONV_TIME, which would wrap the u32 inpsamp to a huge value.

In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Ignore Port I/O requests of length '0' Explicitly ignore Port I/O requests of length '0' (or count '0'), so that setting up the software scratch area (and other code) doesn't have to worry about underflowing the length, and to allow for WARNing on trying to configure the scratch area with len==0.

In the Linux kernel, the following vulnerability has been resolved: Input: xpad - fix out-of-bounds access for Share button xpadone_process_packet() receives len directly from urb->actual_length and uses it to index the share-button byte at data[len - 18] or data[len - 26]. Since both len and data[0] are under the device's control, a broken controller can send a GIP_CMD_INPUT packet with actual_length < 18 (e.g. 5 bytes) and reach this code path, causing accesses beyond the actual array. Fix this by calculating the offset and checking bounds against the packet length.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: fix chan ref leak in l2cap_chan_timeout() on !conn __set_chan_timer() takes a l2cap_chan reference via l2cap_chan_hold() before scheduling the delayed work. The normal path in l2cap_chan_timeout() drops this reference with l2cap_chan_put() at the end, but the early return when chan->conn is NULL skips the put, leaking the reference. Add the missing l2cap_chan_put() before the early return.

In the Linux kernel, the following vulnerability has been resolved: auxdisplay: line-display: fix OOB read on zero-length message_store() linedisp_display() unconditionally reads msg[count - 1] before checking whether count is zero, so a write of zero bytes to the message sysfs attribute hits msg[-1]: write(fd, "", 0); -> message_store(..., buf, count=0) -> linedisp_display(linedisp, buf, count=0) -> msg[count - 1] == '\n' ; OOB read The kernfs write buffer for that store is a 1-byte allocation (kernfs_fop_write_iter() does kmalloc(len + 1) with len == 0), so msg[-1] is a 1-byte read before the slab object. On a KASAN-enabled kernel this trips an out-of-bounds report and panics; on stock kernels it silently reads adjacent slab data and, if that byte happens to be '\n', the following count-- wraps ssize_t 0 to -1 and is then passed to kmemdup_nul(). linedisp_display() is reached from the message_store() sysfs callback (drivers/auxdisplay/line-display.c message attribute, mode 0644) and from the in-tree initial-message setup with count == -1, so the OOB path is only userspace-triggerable via zero-byte writes; vfs_write() does not short-circuit on count == 0 and kernfs_fop_write_iter() dispatches the store callback regardless. Guard the trailing-newline trim with a count check. The existing if (!count) block then takes the clear-display path unchanged. Affects every auxdisplay driver that registers via linedisp_register() / linedisp_attach(): ht16k33, max6959, img-ascii-lcd, seg-led-gpio.

In the Linux kernel, the following vulnerability has been resolved: zram: fix use-after-free in zram_writeback_endio A crash was observed in zram_writeback_endio due to a NULL pointer dereference in wake_up. The root cause is a race condition between the bio completion handler (zram_writeback_endio) and the writeback task. In zram_writeback_endio, wake_up() is called on &wb_ctl->done_wait after releasing wb_ctl->done_lock. This creates a race window where the writeback task can see num_inflight become 0, return, and free wb_ctl before zram_writeback_endio calls wake_up(). CPU 0 (zram_writeback_endio) CPU 1 (writeback_store) ============================ ============================ zram_writeback_slots zram_submit_wb_request zram_submit_wb_request wait_event(wb_ctl->done_wait) spin_lock(&wb_ctl->done_lock); list_add(&req->entry, &wb_ctl->done_reqs); spin_unlock(&wb_ctl->done_lock); wake_up(&wb_ctl->done_wait); zram_complete_done_reqs spin_lock(&wb_ctl->done_lock); list_add(&req->entry, &wb_ctl->done_reqs); spin_unlock(&wb_ctl->done_lock); while (num_inflight) > 0) spin_lock(&wb_ctl->done_lock); list_del(&req->entry); spin_unlock(&wb_ctl->done_lock); // num_inflight becomes 0 atomic_dec(num_inflight); // Leave zram_writeback_slots // Free wb_ctl release_wb_ctl(wb_ctl); // UAF crash! wake_up(&wb_ctl->done_wait); This patch fixes this race by using RCU. By protecting wb_ctl with rcu_read_lock() in zram_writeback_endio and using kfree_rcu() to free it, we ensure that wb_ctl remains valid during the execution of zram_writeback_endio.

In the Linux kernel, the following vulnerability has been resolved: mm/migrate_device: fix pgtable leak in migrate_vma_insert_huge_pmd_page When migrate_vma_insert_huge_pmd_page() jumps to unlock_abort due to a PMD check failure, the pgtable allocated earlier via pte_alloc_one() is never freed, causing a memory leak. Added free_abort label to release the pgtable in error path.

In the Linux kernel, the following vulnerability has been resolved: hpfs: fix a crash if hpfs_map_dnode_bitmap fails If hpfs_map_dnode_bitmap fails, the code would call hpfs_brelse4 on uninitialized quad buffer head, causing a crash.

In the Linux kernel, the following vulnerability has been resolved: mm/vmalloc: do not trigger BUG() on BH disabled context __get_vm_area_node() currently triggers a BUG() if in_interrupt() returns true. However, in_interrupt() also reports true when BH are disabled. The bridge code can call rhashtable_lookup_insert_fast() with bottom halves disabled: __vlan_add() -> br_fdb_add_local() spin_lock_bh(&br->hash_lock); <-- Disable BH -> fdb_add_local() -> fdb_create() -> rhashtable_lookup_insert_fast() -> kvmalloc() -> vmalloc() -> __get_vm_area_node() -> BUG_ON(in_interrupt()) spin_unlock_bh(&br->hash_lock) this triggers the BUG() despite the caller not being in NMI or hard IRQ context. Replace the in_interrupt() check with in_nmi() || in_hardirq().

In the Linux kernel, the following vulnerability has been resolved: USB: serial: cypress_m8: fix memory corruption with small endpoint Make sure that the interrupt-out endpoint max packet size is at least eight bytes to avoid user-controlled slab corruption or NULL-pointer dereference should a malicious device report a smaller size.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: validate connector number in ucsi_connector_change() The connector number in a UCSI CCI notification is a 7-bit field supplied by the PPM. ucsi_connector_change() uses it to index the ucsi->connector[] array without checking it against the number of connectors the PPM reported at init time, so a buggy or malicious PPM (EC firmware, or an I2C-attached UCSI controller on the ccg / stm32g0 / glink transports) can drive schedule_work() on memory past the end of the array. Reject connector numbers that are zero or exceed cap.num_connectors before dereferencing the array.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm/tcpci_maxim: validate header NDO against RX_BYTE_CNT A broken/malicious port can transmit a CRC-valid frame whose header advertises up to seven data objects but whose body carries fewer than that. Check for this, and rightfully reject the message, instead of reading from uninitialized stack memory.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: altmodes/displayport: validate count before reading Status Update VDO A broken/malicious device can send the incorrect count for a status update VDO, which will cause the kernel to read uninitialized stack data and send it off elsewhere. Fix this up by correctly verifying the count for the update object.

In the Linux kernel, the following vulnerability has been resolved: security/keys: fix missed RCU read section on lookup Nicholas Carlini reports that the keyring code calls assoc_array_find() in find_key_to_update() without holding the RCU read lock, while the assoc_array_gc() code really is designed around removing the node from the tree and then freeing it after an RCU grace-period. The regular key handling doesn't see this because holding the keyring semaphore hides any lifetime issues, but the persistent key handling uses a different model. Instead of extending the keyring locking, just do the simple RCU locking that the assoc_array was designed for.

In the Linux kernel, the following vulnerability has been resolved: blk-mq: pop cached request if it is usable When submitting a bio to blk-mq, if the task should sleep after peeking a cached request, but before it pops it, the plug flushes and calls blk_mq_free_plug_rqs, freeing the cached_rqs. This creates a use-after-free bug. Fix this by popping the cached request before any possible blocking calls if it is suitable for use. Popping this request first holds a queue reference, so avoid any serialization races with queue freezes and can safely proceed with dispatching that request to the driver. This potentially increases a timing window from when a driver wants to freeze its queue to when requests stop being dispatched. That scenario is off the fast path though, and drivers need to appropriately handle requests during a freeze request anyway. The downside is the popped element needs to be individually freed when we performed a bio plug merge. The cached request would have had to be freed later anyway, but this patch does it inline with building the plug list instead of after flushing it.

In the Linux kernel, the following vulnerability has been resolved: cgroup/rstat: validate cpu before css_rstat_cpu() access css_rstat_updated() is exposed as a BPF kfunc and accepts a caller-provided cpu argument. The function uses cpu for per-cpu rstat lookups without checking whether it refers to a valid possible CPU. A BPF iter/cgroup program with CAP_BPF and CAP_PERFMON can pass an invalid cpu value. On an unfixed UBSCAN_BOUNDS test kernel, cpu == 0x7fffffff triggers: UBSAN: array-index-out-of-bounds in kernel/cgroup/rstat.c:31:9 index 2147483647 is out of range for type 'long unsigned int [64]' Call Trace: css_rstat_updated bpf_iter_run_prog cgroup_iter_seq_show bpf_seq_read Add cpu validation to the BPF-facing css_rstat_updated() kfunc and move the common implementation to __css_rstat_updated() for in-kernel callers.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (lm90) Stop work before releasing hwmon device Sashiko reports: In lm90_probe(), the devm action to cancel the alert_work and report_work (lm90_restore_conf) is registered in lm90_init_client() before devm_hwmon_device_register_with_info() is called. Because devm executes cleanup actions in reverse order during module unbind or probe failure, the hwmon device is unregistered and freed first. If lm90_alert_work() or lm90_report_alarms() runs in the window between the hwmon device being freed and the delayed works being cancelled, lm90_update_alarms() will dereference the freed data->hwmon_dev here. Fix the problem by canceling the workers separately after registering the hwmon device and before registering the interrupt handler. This ensures that the workers are canceled after interrupts are disabled and before the hwmon device is released. Add "shutdown" flag to indicate that device shutdown is in progress to prevent workers from being re-armed.

In the Linux kernel, the following vulnerability has been resolved: netfilter: bridge: eb_tables: close module init race sashiko reports for unrelated patch: Does the core ebtables initialization in ebtables.c suffer from a similar race? Once nf_register_sockopt() completes, the sockopts are exposed globally. sockopt has to be registered last, just like in ip/ip6/arptables.

In the Linux kernel, the following vulnerability has been resolved: netfilter: ebtables: move to two-stage removal scheme Like previous patches for x_tables, follow same pattern in ebtables. We can't reuse xt helpers: ebt_table struct layout is incompatible. table->ops assignment is now done while still holding the ebt mutex to make sure we never expose partially-filled table struct.

In the Linux kernel, the following vulnerability has been resolved: smb: client: protect tc_count increment in smb2_find_smb_sess_tcon_unlocked() Commit 96c4af418586 ("cifs: Fix locking usage for tcon fields") refactored cifs code to change cifs_tcp_ses_lock for tc_lock around tc_count changes. There was missing lock around tc_count increment inside smb2_find_smb_sess_tcon_unlocked().

In the Linux kernel, the following vulnerability has been resolved: test_kprobes: clear kprobes between test runs Running the kprobes sanity tests twice makes all tests fail and eventually crashes the kernel. [root@martin-riscv-1 ~]# echo 1 > /sys/kernel/debug/kunit/kprobes_test/run ... # Totals: pass:5 fail:0 skip:0 total:5 ok 1 kprobes_test [root@martin-riscv-1 ~]# echo 1 > /sys/kernel/debug/kunit/kprobes_test/run ... # test_kprobe: EXPECTATION FAILED at lib/tests/test_kprobes.c:64 Expected 0 == register_kprobe(&kp), but register_kprobe(&kp) == -22 (0xffffffffffffffea) ... Unable to handle kernel paging request ... The testsuite defines several kprobes and kretprobes as static variables that are preserved across test runs. After register_kprobe and unregister_kprobe, a kprobe contains some leftover data that must be cleared before the kprobe can be registered again. The tests are setting symbol_name to define the probe location. Address and flags must be cleared. The existing code clears some of the probes between subsequent tests, but not between two test runs. The leftover data from a previous test run makes the registrations fail in the next run. Move the cleanups for all kprobes into kprobes_test_init, this function is called before each single test (including the first test of a test run).

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: validate VDO count in Discover Identity ACK handlers Properly validate the count passed from a device when calling svdm_consume_identity() or svdm_consume_identity_sop_prime() as the device-controlled value could index off of the static arrays, which could leak data.

In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix mm_struct reference leak in aie2_populate_range() aie2_populate_range() jumps back to the again label without calling mmput(mm), leaking a reference to the mm_struct. Add the missing mmput() before jumping to again.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn: set no_user_fence for VCN v4.0.5 enc ring VCN encoder and decoder rings do not support 64-bit user fence writes, reject CS submissions with user fences. (cherry picked from commit 084d94ac93707bdda07efb5cee786f632de4219b)

In the Linux kernel, the following vulnerability has been resolved: sctp: fix race between sctp_wait_for_connect and peeloff sctp_wait_for_connect() drops and re-acquires the socket lock while waiting for the association to reach ESTABLISHED state. During this window, another thread can peeloff the association to a new socket via getsockopt(SCTP_SOCKOPT_PEELOFF), changing asoc->base.sk. After re-acquiring the old socket lock, sctp_wait_for_connect() returns success without noticing the migration — the caller then accesses the association under the wrong lock in sctp_datamsg_from_user(). Add the same sk != asoc->base.sk check that sctp_wait_for_sndbuf() already has, returning an error if the association was migrated while we slept.

In the Linux kernel, the following vulnerability has been resolved: ipv6: ioam: refresh hdr pointer before ioam6_event() Reported by Sashiko: In ipv6_hop_ioam(), the hdr pointer is initialized to point into the skb's linear data buffer. Later, the code calls skb_ensure_writable(), which might reallocate the buffer: if (skb_ensure_writable(skb, optoff + 2 + hdr->opt_len)) goto drop; /* Trace pointer may have changed */ trace = (struct ioam6_trace_hdr *)(skb_network_header(skb) + optoff + sizeof(*hdr)); ioam6_fill_trace_data(skb, ns, trace, true); ioam6_event(IOAM6_EVENT_TRACE, dev_net(skb->dev), GFP_ATOMIC, (void *)trace, hdr->opt_len - 2); If the skb is cloned or lacks sufficient linear headroom, skb_ensure_writable() will invoke pskb_expand_head(), which reallocates the skb's data buffer and frees the old one, invalidating pointers to it. While the code recalculates the trace pointer immediately after the call to skb_ensure_writable(), it fails to recalculate the hdr pointer. This patch fixes the above by recalculating the hdr pointer before passing hdr->opt_len to ioam6_event(), so that we avoid any UaF.

In the Linux kernel, the following vulnerability has been resolved: mm/memory: fix spurious warning when unmapping device-private/exclusive pages Device private and exclusive entries are only supported for anonymous folios. This condition is tested in __migrate_device_pages() and make_device_exclusive() using folio_test_anon(). However the unmap path tests this assumption using vma_is_anonymous(). This is wrong because whilst anonymous VMAs can only contain folios where folio_test_anon() is true the opposite relation does not hold. A folio for which folio_test_anon() is true does not imply vma_is_anonymous() is true. Such a condition can occur if for example a folio is part of a private filebacked mapping. In this case vma_is_anonymous() is false as the mapping is filebacked, but folio_test_anon() may be true, thus permitting devices to migrate the folio to device private memory. This can lead to the following spurious warnings during process teardown: [ 772.737706] ------------[ cut here ]------------ [ 772.739201] WARNING: mm/memory.c:1754 at unmap_page_range.cold+0x26/0x18a, CPU#17: hmm-tests/2041 [ 772.742050] Modules linked in: test_hmm nvidia_uvm(O) nvidia(O) [ 772.743959] CPU: 17 UID: 0 PID: 2041 Comm: hmm-tests Tainted: G W O 7.0.0+ #387 PREEMPT(full) [ 772.747104] Tainted: [W]=WARN, [O]=OOT_MODULE [ 772.748509] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 [ 772.752117] RIP: 0010:unmap_page_range.cold+0x26/0x18a [ 772.753780] Code: 7e fe ff ff 48 89 4c 24 78 4c 89 44 24 38 e8 f2 ff b1 00 48 8b 4c 24 78 4c 8b 44 24 38 48 8b 44 24 18 48 83 78 48 00 74 04 90 <0f> 0b 90 48 89 ca b8 ff ff 37 00 48 c1 ea 03 48 c1 e0 2a 80 3c 02 [ 772.759602] RSP: 0018:ffff888112607550 EFLAGS: 00010286 [ 772.761310] RAX: ffff88811bbf4dc0 RBX: dffffc0000000000 RCX: ffffea03e9bfffd8 [ 772.763583] RDX: 1ffff1102377e9c1 RSI: 0000000000000008 RDI: ffff88811bbf4e08 [ 772.765914] RBP: 0000000000000006 R08: ffff8881059f7448 R09: ffffed10224c0e68 [ 772.768184] R10: ffff888112607347 R11: 0000000000000001 R12: 0000000000000001 [ 772.770461] R13: ffffea03e9bfffc0 R14: ffff888112607908 R15: ffffea03e9bfffc0 [ 772.772782] FS: 00007f327caa2780(0000) GS:ffff888427b7d000(0000) knlGS:0000000000000000 [ 772.775328] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 772.777187] CR2: 00007f327ca89000 CR3: 00000001994d5000 CR4: 00000000000006f0 [ 772.779135] Call Trace: [ 772.779792] <TASK> [ 772.780317] ? dmirror_interval_invalidate+0x1a3/0x290 [test_hmm] [ 772.781873] ? vm_normal_page_pud+0x2b0/0x2b0 [ 772.782992] ? __rwlock_init+0x150/0x150 [ 772.784006] ? lock_release+0x216/0x2b0 [ 772.785008] ? __mmu_notifier_invalidate_range_start+0x505/0x6e0 [ 772.786522] ? lock_release+0x216/0x2b0 [ 772.787498] ? unmap_single_vma+0xb6/0x210 [ 772.788573] unmap_vmas+0x27d/0x520 [ 772.789506] ? unmap_single_vma+0x210/0x210 [ 772.790607] ? mas_update_gap.part.0+0x620/0x620 [ 772.791834] unmap_region+0x19e/0x350 [ 772.792769] ? remove_vma+0x130/0x130 [ 772.793684] ? mas_alloc_nodes+0x1f2/0x300 [ 772.794730] vms_complete_munmap_vmas+0x8c1/0xe20 [ 772.795926] ? unmap_region+0x350/0x350 [ 772.796917] do_vmi_align_munmap+0x36a/0x4e0 [ 772.798018] ? lock_release+0x216/0x2b0 [ 772.799024] ? vma_shrink+0x620/0x620 [ 772.799983] do_vmi_munmap+0x150/0x2c0 [ 772.800939] __vm_munmap+0x161/0x2c0 [ 772.801872] ? expand_downwards+0xd60/0xd60 [ 772.802948] ? clockevents_program_event+0x1ef/0x540 [ 772.804217] ? lock_release+0x216/0x2b0 [ 772.805158] __x64_sys_munmap+0x59/0x80 [ 772.805776] do_syscall_64+0xfc/0x670 [ 772.806336] ? irqentry_exit+0xda/0x580 [ 772.806976] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 772.807772] RIP: 0033:0x7f327cbb2717 [ 772.808323] Code: 73 01 c3 48 8b 0d f9 76 0d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 0b 00 00 00 0f 05 <48> 3d 01 f0 ff ---truncated---

In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/adm1266) widen blackbox-info buffer to I2C_SMBUS_BLOCK_MAX adm1266_nvmem_read_blackbox() declares a 5-byte stack buffer and passes it to i2c_smbus_read_block_data() to retrieve the 4-byte BLACKBOX_INFO response. i2c_smbus_read_block_data() does not honour caller buffer sizes -- it memcpy()s data.block[0] bytes from the SMBus transaction (where data.block[0] is the length byte returned by the slave device, up to I2C_SMBUS_BLOCK_MAX = 32): memcpy(values, &data.block[1], data.block[0]); If the device returns any block length above 5, the call overflows the caller's 5-byte stack buffer before the post-call if (ret != 4) return -EIO; check has a chance to reject the response. Widen the local buffer to I2C_SMBUS_BLOCK_MAX so the helper has room for any well-formed SMBus block response, matching the convention used by the other i2c_smbus_read_block_data() callers in this driver.

In the Linux kernel, the following vulnerability has been resolved: smb: client: require net admin for CIFS SWN netlink CIFS_GENL_CMD_SWN_NOTIFY is the userspace witness-notify command. The intended sender is the cifs.witness helper, but the generic-netlink operation currently has no capability flag, so any local process can send RESOURCE_CHANGE or CLIENT_MOVE notifications to the in-kernel witness handler. The same family exposes CIFS_GENL_MCGRP_SWN without multicast-group capability flags. Register messages sent to that group include the witness registration id and, for NTLM-authenticated mounts, the username, domain, and password attributes copied from the CIFS session. An unprivileged local process should not be able to join that group and receive those messages. Require CAP_NET_ADMIN for incoming SWN_NOTIFY commands with GENL_ADMIN_PERM, and require CAP_NET_ADMIN over the network namespace for joining the SWN multicast group with GENL_MCAST_CAP_NET_ADMIN. The cifs.witness service runs with the privileges needed for both operations.

In the Linux kernel, the following vulnerability has been resolved: netfs, afs: Fix write skipping in dir/link writepages Fix netfs_write_single() and afs_single_writepages() to better handle a write that would be skipped due to lock contention and WB_SYNC_NONE by returning 1 from netfs_write_single() if it skipped and making afs_single_writepages() skip also. If a skip occurs, the inode must be re-marked as the VFS may have cleared the mark. This is really only theoretical for directories in netfs_write_single() as the only path to that is through afs_single_writepages() that takes the ->validate_lock around it, thereby serialising it.

In the Linux kernel, the following vulnerability has been resolved: net: ti: icssm-prueth: fix eth_ports_node leak in probe The error path on of_property_read_u32() failure inside icssm_prueth_probe() returns without putting eth_ports_node, which was acquired before the for_each_child_of_node() loop. Drop it before returning.

In the Linux kernel, the following vulnerability has been resolved: kho: skip KHO for crash kernel kho_fill_kimage() unconditionally populates the kimage with KHO metadata for every kexec image type. When the image is a crash kernel, this can be problematic as the crash kernel can run in a small reserved region and the KHO scratch areas can sit outside it. The crash kernel then faults during kho_memory_init() when it tries phys_to_virt() on the KHO FDT address: Unable to handle kernel paging request at virtual address xxxxxxxx ... fdt_offset_ptr+... fdt_check_node_offset_+... fdt_first_property_offset+... fdt_get_property_namelen_+... fdt_getprop+... kho_memory_init+... mm_core_init+... start_kernel+... kho_locate_mem_hole() already skips KHO logic for KEXEC_TYPE_CRASH images, but kho_fill_kimage() was missing the same guard. As kho_fill_kimage() is the single point that populates image->kho.fdt and image->kho.scratch, fixing it here is sufficient for both arm64 and x86 as the FDT and boot_params path are bailing out when these fields are unset.

In the Linux kernel, the following vulnerability has been resolved: spi: sprd: fix error pointer deref after DMA setup failure The driver falls back to PIO mode if DMA setup fails during probe. Make sure to check the dma.enabled flag before trying to release the DMA channels also on late probe errors to avoid dereferencing an error pointer (or attempting to release a channel a second time). This issue was flagged by Sashiko when reviewing a devres allocation conversion patch.

In the Linux kernel, the following vulnerability has been resolved: spi: ep93xx: fix error pointer deref after DMA setup failure The driver falls back to PIO mode if DMA setup fails during probe. Make sure to the clear the DMA channel pointers on setup failure to avoid dereferencing an error pointer on later probe errors or driver unbind. This issue was flagged by Sashiko when reviewing a devres allocation conversion patch.