CVE Feed

In the Linux kernel, the following vulnerability has been resolved: firmware: meson_sm: fix to avoid potential NULL pointer dereference of_match_device() may fail and returns a NULL pointer. Fix this by checking the return value of of_match_device.

In the Linux kernel, the following vulnerability has been resolved: mmc: alcor: fix return value check of mmc_add_host() mmc_add_host() may return error, if we ignore its return value, the memory that allocated in mmc_alloc_host() will be leaked and it will lead a kernel crash because of deleting not added device in the remove path. So fix this by checking the return value and calling mmc_free_host() in the error path.

In the Linux kernel, the following vulnerability has been resolved: usb: musb: Fix musb_gadget.c rxstate overflow bug The usb function device call musb_gadget_queue() adds the passed request to musb_ep::req_list,If the (request->length > musb_ep->packet_sz) and (is_buffer_mapped(req) return false),the rxstate() will copy all data in fifo to request->buf which may cause request->buf out of bounds. Fix it by add the length check : fifocnt = min_t(unsigned, request->length - request->actual, fifocnt);

In the Linux kernel, the following vulnerability has been resolved: ipv6: ensure sane device mtu in tunnels Another syzbot report [1] with no reproducer hints at a bug in ip6_gre tunnel (dev:ip6gretap0) Since ipv6 mcast code makes sure to read dev->mtu once and applies a sanity check on it (see commit b9b312a7a451 "ipv6: mcast: better catch silly mtu values"), a remaining possibility is that a layer is able to set dev->mtu to an underflowed value (high order bit set). This could happen indeed in ip6gre_tnl_link_config_route(), ip6_tnl_link_config() and ipip6_tunnel_bind_dev() Make sure to sanitize mtu value in a local variable before it is written once on dev->mtu, as lockless readers could catch wrong temporary value. [1] skbuff: skb_over_panic: text:ffff80000b7a2f38 len:40 put:40 head:ffff000149dcf200 data:ffff000149dcf2b0 tail:0xd8 end:0xc0 dev:ip6gretap0 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:120 Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 10241 Comm: kworker/1:1 Not tainted 6.0.0-rc7-syzkaller-18095-gbbed346d5a96 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/30/2022 Workqueue: mld mld_ifc_work pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_panic+0x4c/0x50 net/core/skbuff.c:116 lr : skb_panic+0x4c/0x50 net/core/skbuff.c:116 sp : ffff800020dd3b60 x29: ffff800020dd3b70 x28: 0000000000000000 x27: ffff00010df2a800 x26: 00000000000000c0 x25: 00000000000000b0 x24: ffff000149dcf200 x23: 00000000000000c0 x22: 00000000000000d8 x21: ffff80000b7a2f38 x20: ffff00014c2f7800 x19: 0000000000000028 x18: 00000000000001a9 x17: 0000000000000000 x16: ffff80000db49158 x15: ffff000113bf1a80 x14: 0000000000000000 x13: 00000000ffffffff x12: ffff000113bf1a80 x11: ff808000081c0d5c x10: 0000000000000000 x9 : 73f125dc5c63ba00 x8 : 73f125dc5c63ba00 x7 : ffff800008161d1c x6 : 0000000000000000 x5 : 0000000000000080 x4 : 0000000000000001 x3 : 0000000000000000 x2 : ffff0001fefddcd0 x1 : 0000000100000000 x0 : 0000000000000089 Call trace: skb_panic+0x4c/0x50 net/core/skbuff.c:116 skb_over_panic net/core/skbuff.c:125 [inline] skb_put+0xd4/0xdc net/core/skbuff.c:2049 ip6_mc_hdr net/ipv6/mcast.c:1714 [inline] mld_newpack+0x14c/0x270 net/ipv6/mcast.c:1765 add_grhead net/ipv6/mcast.c:1851 [inline] add_grec+0xa20/0xae0 net/ipv6/mcast.c:1989 mld_send_cr+0x438/0x5a8 net/ipv6/mcast.c:2115 mld_ifc_work+0x38/0x290 net/ipv6/mcast.c:2653 process_one_work+0x2d8/0x504 kernel/workqueue.c:2289 worker_thread+0x340/0x610 kernel/workqueue.c:2436 kthread+0x12c/0x158 kernel/kthread.c:376 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:860 Code: 91011400 aa0803e1 a90027ea 94373093 (d4210000)

In the Linux kernel, the following vulnerability has been resolved: net: hsr: avoid possible NULL deref in skb_clone() syzbot got a crash [1] in skb_clone(), caused by a bug in hsr_get_untagged_frame(). When/if create_stripped_skb_hsr() returns NULL, we must not attempt to call skb_clone(). While we are at it, replace a WARN_ONCE() by netdev_warn_once(). [1] general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000078-0x000000000000007f] CPU: 1 PID: 754 Comm: syz-executor.0 Not tainted 6.0.0-syzkaller-02734-g0326074ff465 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 RIP: 0010:skb_clone+0x108/0x3c0 net/core/skbuff.c:1641 Code: 93 02 00 00 49 83 7c 24 28 00 0f 85 e9 00 00 00 e8 5d 4a 29 fa 4c 8d 75 7e 48 b8 00 00 00 00 00 fc ff df 4c 89 f2 48 c1 ea 03 <0f> b6 04 02 4c 89 f2 83 e2 07 38 d0 7f 08 84 c0 0f 85 9e 01 00 00 RSP: 0018:ffffc90003ccf4e0 EFLAGS: 00010207 RAX: dffffc0000000000 RBX: ffffc90003ccf5f8 RCX: ffffc9000c24b000 RDX: 000000000000000f RSI: ffffffff8751cb13 RDI: 0000000000000000 RBP: 0000000000000000 R08: 00000000000000f0 R09: 0000000000000140 R10: fffffbfff181d972 R11: 0000000000000000 R12: ffff888161fc3640 R13: 0000000000000a20 R14: 000000000000007e R15: ffffffff8dc5f620 FS: 00007feb621e4700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007feb621e3ff8 CR3: 00000001643a9000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> hsr_get_untagged_frame+0x4e/0x610 net/hsr/hsr_forward.c:164 hsr_forward_do net/hsr/hsr_forward.c:461 [inline] hsr_forward_skb+0xcca/0x1d50 net/hsr/hsr_forward.c:623 hsr_handle_frame+0x588/0x7c0 net/hsr/hsr_slave.c:69 __netif_receive_skb_core+0x9fe/0x38f0 net/core/dev.c:5379 __netif_receive_skb_one_core+0xae/0x180 net/core/dev.c:5483 __netif_receive_skb+0x1f/0x1c0 net/core/dev.c:5599 netif_receive_skb_internal net/core/dev.c:5685 [inline] netif_receive_skb+0x12f/0x8d0 net/core/dev.c:5744 tun_rx_batched+0x4ab/0x7a0 drivers/net/tun.c:1544 tun_get_user+0x2686/0x3a00 drivers/net/tun.c:1995 tun_chr_write_iter+0xdb/0x200 drivers/net/tun.c:2025 call_write_iter include/linux/fs.h:2187 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x9e9/0xdd0 fs/read_write.c:584 ksys_write+0x127/0x250 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd

In the Linux kernel, the following vulnerability has been resolved: scsi: pm8001: Fix running_req for internal abort commands Disabling the remote phy for a SATA disk causes a hang: root@(none)$ more /sys/class/sas_phy/phy-0:0:8/target_port_protocols sata root@(none)$ echo 0 > sys/class/sas_phy/phy-0:0:8/enable root@(none)$ [ 67.855950] sas: ex 500e004aaaaaaa1f phy08 change count has changed [ 67.920585] sd 0:0:2:0: [sdc] Synchronizing SCSI cache [ 67.925780] sd 0:0:2:0: [sdc] Synchronize Cache(10) failed: Result: hostbyte=0x04 driverbyte=DRIVER_OK [ 67.935094] sd 0:0:2:0: [sdc] Stopping disk [ 67.939305] sd 0:0:2:0: [sdc] Start/Stop Unit failed: Result: hostbyte=0x04 driverbyte=DRIVER_OK ... [ 123.998998] INFO: task kworker/u192:1:642 blocked for more than 30 seconds. [ 124.005960] Not tainted 6.0.0-rc1-205202-gf26f8f761e83 #218 [ 124.012049] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 124.019872] task:kworker/u192:1 state:D stack:0 pid: 642 ppid: 2 flags:0x00000008 [ 124.028223] Workqueue: 0000:04:00.0_event_q sas_port_event_worker [ 124.034319] Call trace: [ 124.036758] __switch_to+0x128/0x278 [ 124.040333] __schedule+0x434/0xa58 [ 124.043820] schedule+0x94/0x138 [ 124.047045] schedule_timeout+0x2fc/0x368 [ 124.051052] wait_for_completion+0xdc/0x200 [ 124.055234] __flush_workqueue+0x1a8/0x708 [ 124.059328] sas_porte_broadcast_rcvd+0xa8/0xc0 [ 124.063858] sas_port_event_worker+0x60/0x98 [ 124.068126] process_one_work+0x3f8/0x660 [ 124.072134] worker_thread+0x70/0x700 [ 124.075793] kthread+0x1a4/0x1b8 [ 124.079014] ret_from_fork+0x10/0x20 The issue is that the per-device running_req read in pm8001_dev_gone_notify() never goes to zero and we never make progress. This is caused by missing accounting for running_req for when an internal abort command completes. In commit 2cbbf489778e ("scsi: pm8001: Use libsas internal abort support") we started to send internal abort commands as a proper sas_task. In this when we deliver a sas_task to HW the per-device running_req is incremented in pm8001_queue_command(). However it is never decremented for internal abort commnds, so decrement in pm8001_mpi_task_abort_resp().

In the Linux kernel, the following vulnerability has been resolved: perf/arm_dmc620: Fix hotplug callback leak in dmc620_pmu_init() dmc620_pmu_init() won't remove the callback added by cpuhp_setup_state_multi() when platform_driver_register() failed. Remove the callback by cpuhp_remove_multi_state() in fail path. Similar to the handling of arm_ccn_init() in commit 26242b330093 ("bus: arm-ccn: Prevent hotplug callback leak")

In the Linux kernel, the following vulnerability has been resolved: media: s5p-mfc: Clear workbit to handle error condition During error on CLOSE_INSTANCE command, ctx_work_bits was not getting cleared. During consequent mfc execution NULL pointer dereferencing of this context led to kernel panic. This patch fixes this issue by making sure to clear ctx_work_bits always.

In the Linux kernel, the following vulnerability has been resolved: rapidio: devices: fix missing put_device in mport_cdev_open When kfifo_alloc fails, the refcount of chdev->dev is left incremental. We should use put_device(&chdev->dev) to decrease the ref count of chdev->dev to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: security: Restrict CONFIG_ZERO_CALL_USED_REGS to gcc or clang > 15.0.6 A bad bug in clang's implementation of -fzero-call-used-regs can result in NULL pointer dereferences (see the links above the check for more information). Restrict CONFIG_CC_HAS_ZERO_CALL_USED_REGS to either a supported GCC version or a clang newer than 15.0.6, which will catch both a theoretical 15.0.7 and the upcoming 16.0.0, which will both have the bug fixed.

In the Linux kernel, the following vulnerability has been resolved: drivers: mcb: fix resource leak in mcb_probe() When probe hook function failed in mcb_probe(), it doesn't put the device. Compiled test only.

In the Linux kernel, the following vulnerability has been resolved: clk: tegra: Fix refcount leak in tegra114_clock_init of_find_matching_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: tpm: tpm_tis: Add the missed acpi_put_table() to fix memory leak In check_acpi_tpm2(), we get the TPM2 table just to make sure the table is there, not used after the init, so the acpi_put_table() should be added to release the ACPI memory.

In the Linux kernel, the following vulnerability has been resolved: ipu3-imgu: Fix NULL pointer dereference in imgu_subdev_set_selection() Calling v4l2_subdev_get_try_crop() and v4l2_subdev_get_try_compose() with a subdev state of NULL leads to a NULL pointer dereference. This can currently happen in imgu_subdev_set_selection() when the state passed in is NULL, as this method first gets pointers to both the "try" and "active" states and only then decides which to use. The same issue has been addressed for imgu_subdev_get_selection() with commit 30d03a0de650 ("ipu3-imgu: Fix NULL pointer dereference in active selection access"). However the issue still persists in imgu_subdev_set_selection(). Therefore, apply a similar fix as done in the aforementioned commit to imgu_subdev_set_selection(). To keep things a bit cleaner, introduce helper functions for "crop" and "compose" access and use them in both imgu_subdev_set_selection() and imgu_subdev_get_selection().

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: use hdev->workqueue when queuing hdev->{cmd,ncmd}_timer works syzbot is reporting attempt to schedule hdev->cmd_work work from system_wq WQ into hdev->workqueue WQ which is under draining operation [1], for commit c8efcc2589464ac7 ("workqueue: allow chained queueing during destruction") does not allow such operation. The check introduced by commit 877afadad2dce8aa ("Bluetooth: When HCI work queue is drained, only queue chained work") was incomplete. Use hdev->workqueue WQ when queuing hdev->{cmd,ncmd}_timer works because hci_{cmd,ncmd}_timeout() calls queue_work(hdev->workqueue). Also, protect the queuing operation with RCU read lock in order to avoid calling queue_delayed_work() after cancel_delayed_work() completed.

In the Linux kernel, the following vulnerability has been resolved: nfc: Fix potential resource leaks nfc_get_device() take reference for the device, add missing nfc_put_device() to release it when not need anymore. Also fix the style warnning by use error EOPNOTSUPP instead of ENOTSUPP.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: tag_8021q: avoid leaking ctx on dsa_tag_8021q_register() error path If dsa_tag_8021q_setup() fails, for example due to the inability of the device to install a VLAN, the tag_8021q context of the switch will leak. Make sure it is freed on the error path.

In the Linux kernel, the following vulnerability has been resolved: net: stream: purge sk_error_queue in sk_stream_kill_queues() Changheon Lee reported TCP socket leaks, with a nice repro. It seems we leak TCP sockets with the following sequence: 1) SOF_TIMESTAMPING_TX_ACK is enabled on the socket. Each ACK will cook an skb put in error queue, from __skb_tstamp_tx(). __skb_tstamp_tx() is using skb_clone(), unless SOF_TIMESTAMPING_OPT_TSONLY was also requested. 2) If the application is also using MSG_ZEROCOPY, then we put in the error queue cloned skbs that had a struct ubuf_info attached to them. Whenever an struct ubuf_info is allocated, sock_zerocopy_alloc() does a sock_hold(). As long as the cloned skbs are still in sk_error_queue, socket refcount is kept elevated. 3) Application closes the socket, while error queue is not empty. Since tcp_close() no longer purges the socket error queue, we might end up with a TCP socket with at least one skb in error queue keeping the socket alive forever. This bug can be (ab)used to consume all kernel memory and freeze the host. We need to purge the error queue, with proper synchronization against concurrent writers.

In the Linux kernel, the following vulnerability has been resolved: dm clone: Fix UAF in clone_dtr() Dm_clone also has the same UAF problem when dm_resume() and dm_destroy() are concurrent. Therefore, cancelling timer again in clone_dtr().

In the Linux kernel, the following vulnerability has been resolved: pstore: Avoid kcore oops by vmap()ing with VM_IOREMAP An oops can be induced by running 'cat /proc/kcore > /dev/null' on devices using pstore with the ram backend because kmap_atomic() assumes lowmem pages are accessible with __va(). Unable to handle kernel paging request at virtual address ffffff807ff2b000 Mem abort info: ESR = 0x96000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x06: level 2 translation fault Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000081d87000 [ffffff807ff2b000] pgd=180000017fe18003, p4d=180000017fe18003, pud=180000017fe18003, pmd=0000000000000000 Internal error: Oops: 96000006 [#1] PREEMPT SMP Modules linked in: dm_integrity CPU: 7 PID: 21179 Comm: perf Not tainted 5.15.67-10882-ge4eb2eb988cd #1 baa443fb8e8477896a370b31a821eb2009f9bfba Hardware name: Google Lazor (rev3 - 8) (DT) pstate: a0400009 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __memcpy+0x110/0x260 lr : vread+0x194/0x294 sp : ffffffc013ee39d0 x29: ffffffc013ee39f0 x28: 0000000000001000 x27: ffffff807ff2b000 x26: 0000000000001000 x25: ffffffc0085a2000 x24: ffffff802d4b3000 x23: ffffff80f8a60000 x22: ffffff802d4b3000 x21: ffffffc0085a2000 x20: ffffff8080b7bc68 x19: 0000000000001000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: ffffffd3073f2e60 x14: ffffffffad588000 x13: 0000000000000000 x12: 0000000000000001 x11: 00000000000001a2 x10: 00680000fff2bf0b x9 : 03fffffff807ff2b x8 : 0000000000000001 x7 : 0000000000000000 x6 : 0000000000000000 x5 : ffffff802d4b4000 x4 : ffffff807ff2c000 x3 : ffffffc013ee3a78 x2 : 0000000000001000 x1 : ffffff807ff2b000 x0 : ffffff802d4b3000 Call trace: __memcpy+0x110/0x260 read_kcore+0x584/0x778 proc_reg_read+0xb4/0xe4 During early boot, memblock reserves the pages for the ramoops reserved memory node in DT that would otherwise be part of the direct lowmem mapping. Pstore's ram backend reuses those reserved pages to change the memory type (writeback or non-cached) by passing the pages to vmap() (see pfn_to_page() usage in persistent_ram_vmap() for more details) with specific flags. When read_kcore() starts iterating over the vmalloc region, it runs over the virtual address that vmap() returned for ramoops. In aligned_vread() the virtual address is passed to vmalloc_to_page() which returns the page struct for the reserved lowmem area. That lowmem page is passed to kmap_atomic(), which effectively calls page_to_virt() that assumes a lowmem page struct must be directly accessible with __va() and friends. These pages are mapped via vmap() though, and the lowmem mapping was never made, so accessing them via the lowmem virtual address oopses like above. Let's side-step this problem by passing VM_IOREMAP to vmap(). This will tell vread() to not include the ramoops region in the kcore. Instead the area will look like a bunch of zeros. The alternative is to teach kmap() about vmalloc areas that intersect with lowmem. Presumably such a change isn't a one-liner, and there isn't much interest in inspecting the ramoops region in kcore files anyway, so the most expedient route is taken for now.

In the Linux kernel, the following vulnerability has been resolved: vhost_vdpa: fix the crash in unmap a large memory While testing in vIOMMU, sometimes Guest will unmap very large memory, which will cause the crash. To fix this, add a new function vhost_vdpa_general_unmap(). This function will only unmap the memory that saved in iotlb. Call Trace: [ 647.820144] ------------[ cut here ]------------ [ 647.820848] kernel BUG at drivers/iommu/intel/iommu.c:1174! [ 647.821486] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 647.822082] CPU: 10 PID: 1181 Comm: qemu-system-x86 Not tainted 6.0.0-rc1home_lulu_2452_lulu7_vhost+ #62 [ 647.823139] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-29-g6a62e0cb0dfe-prebuilt.qem4 [ 647.824365] RIP: 0010:domain_unmap+0x48/0x110 [ 647.825424] Code: 48 89 fb 8d 4c f6 1e 39 c1 0f 4f c8 83 e9 0c 83 f9 3f 7f 18 48 89 e8 48 d3 e8 48 85 c0 75 59 [ 647.828064] RSP: 0018:ffffae5340c0bbf0 EFLAGS: 00010202 [ 647.828973] RAX: 0000000000000001 RBX: ffff921793d10540 RCX: 000000000000001b [ 647.830083] RDX: 00000000080000ff RSI: 0000000000000001 RDI: ffff921793d10540 [ 647.831214] RBP: 0000000007fc0100 R08: ffffae5340c0bcd0 R09: 0000000000000003 [ 647.832388] R10: 0000007fc0100000 R11: 0000000000100000 R12: 00000000080000ff [ 647.833668] R13: ffffae5340c0bcd0 R14: ffff921793d10590 R15: 0000008000100000 [ 647.834782] FS: 00007f772ec90640(0000) GS:ffff921ce7a80000(0000) knlGS:0000000000000000 [ 647.836004] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 647.836990] CR2: 00007f02c27a3a20 CR3: 0000000101b0c006 CR4: 0000000000372ee0 [ 647.838107] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 647.839283] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 647.840666] Call Trace: [ 647.841437] <TASK> [ 647.842107] intel_iommu_unmap_pages+0x93/0x140 [ 647.843112] __iommu_unmap+0x91/0x1b0 [ 647.844003] iommu_unmap+0x6a/0x95 [ 647.844885] vhost_vdpa_unmap+0x1de/0x1f0 [vhost_vdpa] [ 647.845985] vhost_vdpa_process_iotlb_msg+0xf0/0x90b [vhost_vdpa] [ 647.847235] ? _raw_spin_unlock+0x15/0x30 [ 647.848181] ? _copy_from_iter+0x8c/0x580 [ 647.849137] vhost_chr_write_iter+0xb3/0x430 [vhost] [ 647.850126] vfs_write+0x1e4/0x3a0 [ 647.850897] ksys_write+0x53/0xd0 [ 647.851688] do_syscall_64+0x3a/0x90 [ 647.852508] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 647.853457] RIP: 0033:0x7f7734ef9f4f [ 647.854408] Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 29 76 f8 ff 48 8b 54 24 18 48 8b 74 24 10 41 89 c8 [ 647.857217] RSP: 002b:00007f772ec8f040 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 [ 647.858486] RAX: ffffffffffffffda RBX: 00000000fef00000 RCX: 00007f7734ef9f4f [ 647.859713] RDX: 0000000000000048 RSI: 00007f772ec8f090 RDI: 0000000000000010 [ 647.860942] RBP: 00007f772ec8f1a0 R08: 0000000000000000 R09: 0000000000000000 [ 647.862206] R10: 0000000000000001 R11: 0000000000000293 R12: 0000000000000010 [ 647.863446] R13: 0000000000000002 R14: 0000000000000000 R15: ffffffff01100000 [ 647.864692] </TASK> [ 647.865458] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs v] [ 647.874688] ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: fix use after free in mt7921_acpi_read() Don't dereference "sar_root" after it has been freed.

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix xid leak in cifs_ses_add_channel() Before return, should free the xid, otherwise, the xid will be leaked.

In the Linux kernel, the following vulnerability has been resolved: rapidio: rio: fix possible name leak in rio_register_mport() If device_register() returns error, the name allocated by dev_set_name() need be freed. It should use put_device() to give up the reference in the error path, so that the name can be freed in kobject_cleanup(), and list_del() is called to delete the port from rio_mports.

In the Linux kernel, the following vulnerability has been resolved: bpf: prevent decl_tag from being referenced in func_proto Syzkaller was able to hit the following issue: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 3609 at kernel/bpf/btf.c:1946 btf_type_id_size+0x2d5/0x9d0 kernel/bpf/btf.c:1946 Modules linked in: CPU: 0 PID: 3609 Comm: syz-executor361 Not tainted 6.0.0-syzkaller-02734-g0326074ff465 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 RIP: 0010:btf_type_id_size+0x2d5/0x9d0 kernel/bpf/btf.c:1946 Code: ef e8 7f 8e e4 ff 41 83 ff 0b 77 28 f6 44 24 10 18 75 3f e8 6d 91 e4 ff 44 89 fe bf 0e 00 00 00 e8 20 8e e4 ff e8 5b 91 e4 ff <0f> 0b 45 31 f6 e9 98 02 00 00 41 83 ff 12 74 18 e8 46 91 e4 ff 44 RSP: 0018:ffffc90003cefb40 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 RDX: ffff8880259c0000 RSI: ffffffff81968415 RDI: 0000000000000005 RBP: ffff88801270ca00 R08: 0000000000000005 R09: 000000000000000e R10: 0000000000000011 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000011 R14: ffff888026ee6424 R15: 0000000000000011 FS: 000055555641b300(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000f2e258 CR3: 000000007110e000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> btf_func_proto_check kernel/bpf/btf.c:4447 [inline] btf_check_all_types kernel/bpf/btf.c:4723 [inline] btf_parse_type_sec kernel/bpf/btf.c:4752 [inline] btf_parse kernel/bpf/btf.c:5026 [inline] btf_new_fd+0x1926/0x1e70 kernel/bpf/btf.c:6892 bpf_btf_load kernel/bpf/syscall.c:4324 [inline] __sys_bpf+0xb7d/0x4cf0 kernel/bpf/syscall.c:5010 __do_sys_bpf kernel/bpf/syscall.c:5069 [inline] __se_sys_bpf kernel/bpf/syscall.c:5067 [inline] __x64_sys_bpf+0x75/0xb0 kernel/bpf/syscall.c:5067 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f0fbae41c69 Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffc8aeb6228 EFLAGS: 00000246 ORIG_RAX: 0000000000000141 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f0fbae41c69 RDX: 0000000000000020 RSI: 0000000020000140 RDI: 0000000000000012 RBP: 00007f0fbae05e10 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000ffffffff R11: 0000000000000246 R12: 00007f0fbae05ea0 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Looks like it tries to create a func_proto which return type is decl_tag. For the details, see Martin's spot on analysis in [0]. 0: https://lore.kernel.org/bpf/CAKH8qBuQDLva_hHxxBuZzyAcYNO4ejhovz6TQeVSk8HY-2SO6g@mail.gmail.com/T/#mea6524b3fcd6298347432226e81b1e6155efc62c

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: free unused skb to prevent memory leak This avoid potential memory leak under power saving mode.

In the Linux kernel, the following vulnerability has been resolved: hwrng: amd - Fix PCI device refcount leak for_each_pci_dev() is implemented by pci_get_device(). The comment of pci_get_device() says that it will increase the reference count for the returned pci_dev and also decrease the reference count for the input pci_dev @from if it is not NULL. If we break for_each_pci_dev() loop with pdev not NULL, we need to call pci_dev_put() to decrease the reference count. Add the missing pci_dev_put() for the normal and error path.

In the Linux kernel, the following vulnerability has been resolved: vdpa/vp_vdpa: fix kfree a wrong pointer in vp_vdpa_remove In vp_vdpa_remove(), the code kfree(&vp_vdpa_mgtdev->mgtdev.id_table) uses a reference of pointer as the argument of kfree, which is the wrong pointer and then may hit crash like this: Unable to handle kernel paging request at virtual address 00ffff003363e30c Internal error: Oops: 96000004 [#1] SMP Call trace: rb_next+0x20/0x5c ext4_readdir+0x494/0x5c4 [ext4] iterate_dir+0x168/0x1b4 __se_sys_getdents64+0x68/0x170 __arm64_sys_getdents64+0x24/0x30 el0_svc_common.constprop.0+0x7c/0x1bc do_el0_svc+0x2c/0x94 el0_svc+0x20/0x30 el0_sync_handler+0xb0/0xb4 el0_sync+0x160/0x180 Code: 54000220 f9400441 b4000161 aa0103e0 (f9400821) SMP: stopping secondary CPUs Starting crashdump kernel...

In the Linux kernel, the following vulnerability has been resolved: RDMA/erdma: Fix refcount leak in erdma_mmap rdma_user_mmap_entry_get() take reference, we should release it when not need anymore, add the missing rdma_user_mmap_entry_put() in the error path to fix it.

In the Linux kernel, the following vulnerability has been resolved: of: overlay: fix null pointer dereferencing in find_dup_cset_node_entry() and find_dup_cset_prop() When kmalloc() fail to allocate memory in kasprintf(), fn_1 or fn_2 will be NULL, and strcmp() will cause null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: objtool: Fix SEGFAULT find_insn() will return NULL in case of failure. Check insn in order to avoid a kernel Oops for NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath10k: add peer map clean up for peer delete in ath10k_sta_state() When peer delete failed in a disconnect operation, use-after-free detected by KFENCE in below log. It is because for each vdev_id and address, it has only one struct ath10k_peer, it is allocated in ath10k_peer_map_event(). When connected to an AP, it has more than one HTT_T2H_MSG_TYPE_PEER_MAP reported from firmware, then the array peer_map of struct ath10k will be set muti-elements to the same ath10k_peer in ath10k_peer_map_event(). When peer delete failed in ath10k_sta_state(), the ath10k_peer will be free for the 1st peer id in array peer_map of struct ath10k, and then use-after-free happened for the 2nd peer id because they map to the same ath10k_peer. And clean up all peers in array peer_map for the ath10k_peer, then user-after-free disappeared peer map event log: [ 306.911021] wlan0: authenticate with b0:2a:43:e6:75:0e [ 306.957187] ath10k_pci 0000:01:00.0: mac vdev 0 peer create b0:2a:43:e6:75:0e (new sta) sta 1 / 32 peer 1 / 33 [ 306.957395] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 246 [ 306.957404] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 198 [ 306.986924] ath10k_pci 0000:01:00.0: htt peer map vdev 0 peer b0:2a:43:e6:75:0e id 166 peer unmap event log: [ 435.715691] wlan0: deauthenticating from b0:2a:43:e6:75:0e by local choice (Reason: 3=DEAUTH_LEAVING) [ 435.716802] ath10k_pci 0000:01:00.0: mac vdev 0 peer delete b0:2a:43:e6:75:0e sta ffff990e0e9c2b50 (sta gone) [ 435.717177] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 246 [ 435.717186] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 198 [ 435.717193] ath10k_pci 0000:01:00.0: htt peer unmap vdev 0 peer b0:2a:43:e6:75:0e id 166 use-after-free log: [21705.888627] wlan0: deauthenticating from d0:76:8f:82:be:75 by local choice (Reason: 3=DEAUTH_LEAVING) [21713.799910] ath10k_pci 0000:01:00.0: failed to delete peer d0:76:8f:82:be:75 for vdev 0: -110 [21713.799925] ath10k_pci 0000:01:00.0: found sta peer d0:76:8f:82:be:75 (ptr 0000000000000000 id 102) entry on vdev 0 after it was supposedly removed [21713.799968] ================================================================== [21713.799991] BUG: KFENCE: use-after-free read in ath10k_sta_state+0x265/0xb8a [ath10k_core] [21713.799991] [21713.799997] Use-after-free read at 0x00000000abe1c75e (in kfence-#69): [21713.800010] ath10k_sta_state+0x265/0xb8a [ath10k_core] [21713.800041] drv_sta_state+0x115/0x677 [mac80211] [21713.800059] __sta_info_destroy_part2+0xb1/0x133 [mac80211] [21713.800076] __sta_info_flush+0x11d/0x162 [mac80211] [21713.800093] ieee80211_set_disassoc+0x12d/0x2f4 [mac80211] [21713.800110] ieee80211_mgd_deauth+0x26c/0x29b [mac80211] [21713.800137] cfg80211_mlme_deauth+0x13f/0x1bb [cfg80211] [21713.800153] nl80211_deauthenticate+0xf8/0x121 [cfg80211] [21713.800161] genl_rcv_msg+0x38e/0x3be [21713.800166] netlink_rcv_skb+0x89/0xf7 [21713.800171] genl_rcv+0x28/0x36 [21713.800176] netlink_unicast+0x179/0x24b [21713.800181] netlink_sendmsg+0x3a0/0x40e [21713.800187] sock_sendmsg+0x72/0x76 [21713.800192] ____sys_sendmsg+0x16d/0x1e3 [21713.800196] ___sys_sendmsg+0x95/0xd1 [21713.800200] __sys_sendmsg+0x85/0xbf [21713.800205] do_syscall_64+0x43/0x55 [21713.800210] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [21713.800213] [21713.800219] kfence-#69: 0x000000009149b0d5-0x000000004c0697fb, size=1064, cache=kmalloc-2k [21713.800219] [21713.800224] allocated by task 13 on cpu 0 at 21705.501373s: [21713.800241] ath10k_peer_map_event+0x7e/0x154 [ath10k_core] [21713.800254] ath10k_htt_t2h_msg_handler+0x586/0x1039 [ath10k_core] [21713.800265] ath10k_htt_htc_t2h_msg_handler+0x12/0x28 [ath10k_core] [21713.800277] ath10k_htc_rx_completion_handler+0x14c/0x1b5 [ath10k_core] [21713.800283] ath10k_pci_process_rx_cb+0x195/0x1d ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm: Prevent drm_copy_field() to attempt copying a NULL pointer There are some struct drm_driver fields that are required by drivers since drm_copy_field() attempts to copy them to user-space via DRM_IOCTL_VERSION. But it can be possible that a driver has a bug and did not set some of the fields, which leads to drm_copy_field() attempting to copy a NULL pointer: [ +10.395966] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000000 [ +0.010955] Mem abort info: [ +0.002835] ESR = 0x0000000096000004 [ +0.003872] EC = 0x25: DABT (current EL), IL = 32 bits [ +0.005395] SET = 0, FnV = 0 [ +0.003113] EA = 0, S1PTW = 0 [ +0.003182] FSC = 0x04: level 0 translation fault [ +0.004964] Data abort info: [ +0.002919] ISV = 0, ISS = 0x00000004 [ +0.003886] CM = 0, WnR = 0 [ +0.003040] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000115dad000 [ +0.006536] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 [ +0.006925] Internal error: Oops: 96000004 [#1] SMP ... [ +0.011113] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ +0.007061] pc : __pi_strlen+0x14/0x150 [ +0.003895] lr : drm_copy_field+0x30/0x1a4 [ +0.004156] sp : ffff8000094b3a50 [ +0.003355] x29: ffff8000094b3a50 x28: ffff8000094b3b70 x27: 0000000000000040 [ +0.007242] x26: ffff443743c2ba00 x25: 0000000000000000 x24: 0000000000000040 [ +0.007243] x23: ffff443743c2ba00 x22: ffff8000094b3b70 x21: 0000000000000000 [ +0.007241] x20: 0000000000000000 x19: ffff8000094b3b90 x18: 0000000000000000 [ +0.007241] x17: 0000000000000000 x16: 0000000000000000 x15: 0000aaab14b9af40 [ +0.007241] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ +0.007239] x11: 0000000000000000 x10: 0000000000000000 x9 : ffffa524ad67d4d8 [ +0.007242] x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : 6c6e6263606e7141 [ +0.007239] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 [ +0.007241] x2 : 0000000000000000 x1 : ffff8000094b3b90 x0 : 0000000000000000 [ +0.007240] Call trace: [ +0.002475] __pi_strlen+0x14/0x150 [ +0.003537] drm_version+0x84/0xac [ +0.003448] drm_ioctl_kernel+0xa8/0x16c [ +0.003975] drm_ioctl+0x270/0x580 [ +0.003448] __arm64_sys_ioctl+0xb8/0xfc [ +0.003978] invoke_syscall+0x78/0x100 [ +0.003799] el0_svc_common.constprop.0+0x4c/0xf4 [ +0.004767] do_el0_svc+0x38/0x4c [ +0.003357] el0_svc+0x34/0x100 [ +0.003185] el0t_64_sync_handler+0x11c/0x150 [ +0.004418] el0t_64_sync+0x190/0x194 [ +0.003716] Code: 92402c04 b200c3e8 f13fc09f 5400088c (a9400c02) [ +0.006180] ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: mmc: toshsd: fix return value check of mmc_add_host() mmc_add_host() may return error, if we ignore its return value, the memory that allocated in mmc_alloc_host() will be leaked and it will lead a kernel crash because of deleting not added device in the remove path. So fix this by checking the return value and goto error path which will call mmc_free_host(), besides, free_irq() also needs be called.

In the Linux kernel, the following vulnerability has been resolved: regulator: core: fix unbalanced of node refcount in regulator_dev_lookup() I got the the following report: OF: ERROR: memory leak, expected refcount 1 instead of 2, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /i2c/pmic@62/regulators/exten In of_get_regulator(), the node is returned from of_parse_phandle() with refcount incremented, after using it, of_node_put() need be called.

In the Linux kernel, the following vulnerability has been resolved: dm integrity: Fix UAF in dm_integrity_dtr() Dm_integrity also has the same UAF problem when dm_resume() and dm_destroy() are concurrent. Therefore, cancelling timer again in dm_integrity_dtr().

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix iso_conn related locking and validity issues sk->sk_state indicates whether iso_pi(sk)->conn is valid. Operations that check/update sk_state and access conn should hold lock_sock, otherwise they can race. The order of taking locks is hci_dev_lock > lock_sock > iso_conn_lock, which is how it is in connect/disconnect_cfm -> iso_conn_del -> iso_chan_del. Fix locking in iso_connect_cis/bis and sendmsg/recvmsg to take lock_sock around updating sk_state and conn. iso_conn_del must not occur during iso_connect_cis/bis, as it frees the iso_conn. Hold hdev->lock longer to prevent that. This should not reintroduce the issue fixed in commit 241f51931c35 ("Bluetooth: ISO: Avoid circular locking dependency"), since the we acquire locks in order. We retain the fix in iso_sock_connect to release lock_sock before iso_connect_* acquires hdev->lock. Similarly for commit 6a5ad251b7cd ("Bluetooth: ISO: Fix possible circular locking dependency"). We retain the fix in iso_conn_ready to not acquire iso_conn_lock before lock_sock. iso_conn_add shall return iso_conn with valid hcon. Make it so also when reusing an old CIS connection waiting for disconnect timeout (see __iso_sock_close where conn->hcon is set to NULL). Trace with iso_conn_del after iso_chan_add in iso_connect_cis: =============================================================== iso_sock_create:771: sock 00000000be9b69b7 iso_sock_init:693: sk 000000004dff667e iso_sock_bind:827: sk 000000004dff667e 70:1a:b8:98:ff:a2 type 1 iso_sock_setsockopt:1289: sk 000000004dff667e iso_sock_setsockopt:1289: sk 000000004dff667e iso_sock_setsockopt:1289: sk 000000004dff667e iso_sock_connect:875: sk 000000004dff667e iso_connect_cis:353: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da hci_get_route:1199: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da hci_conn_add:1005: hci0 dst 28:3d:c2:4a:7e:da iso_conn_add:140: hcon 000000007b65d182 conn 00000000daf8625e __iso_chan_add:214: conn 00000000daf8625e iso_connect_cfm:1700: hcon 000000007b65d182 bdaddr 28:3d:c2:4a:7e:da status 12 iso_conn_del:187: hcon 000000007b65d182 conn 00000000daf8625e, err 16 iso_sock_clear_timer:117: sock 000000004dff667e state 3 <Note: sk_state is BT_BOUND (3), so iso_connect_cis is still running at this point> iso_chan_del:153: sk 000000004dff667e, conn 00000000daf8625e, err 16 hci_conn_del:1151: hci0 hcon 000000007b65d182 handle 65535 hci_conn_unlink:1102: hci0: hcon 000000007b65d182 hci_chan_list_flush:2780: hcon 000000007b65d182 iso_sock_getsockopt:1376: sk 000000004dff667e iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e iso_sock_getsockopt:1376: sk 000000004dff667e iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e iso_sock_getname:1070: sock 00000000be9b69b7, sk 000000004dff667e iso_sock_shutdown:1434: sock 00000000be9b69b7, sk 000000004dff667e, how 1 __iso_sock_close:632: sk 000000004dff667e state 5 socket 00000000be9b69b7 <Note: sk_state is BT_CONNECT (5), even though iso_chan_del sets BT_CLOSED (6). Only iso_connect_cis sets it to BT_CONNECT, so it must be that iso_chan_del occurred between iso_chan_add and end of iso_connect_cis.> BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 8000000006467067 P4D 8000000006467067 PUD 3f5f067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-1.fc38 04/01/2014 RIP: 0010:__iso_sock_close (net/bluetooth/iso.c:664) bluetooth =============================================================== Trace with iso_conn_del before iso_chan_add in iso_connect_cis: =============================================================== iso_connect_cis:356: 70:1a:b8:98:ff:a2 -> 28:3d:c2:4a:7e:da ... iso_conn_add:140: hcon 0000000093bc551f conn 00000000768ae504 hci_dev_put:1487: hci0 orig refcnt 21 hci_event_packet:7607: hci0: e ---truncated---

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx4: Prevent shift wrapping in set_user_sq_size() The ucmd->log_sq_bb_count variable is controlled by the user so this shift can wrap. Fix it by using check_shl_overflow() in the same way that it was done in commit 515f60004ed9 ("RDMA/hns: Prevent undefined behavior in hns_roce_set_user_sq_size()").

In the Linux kernel, the following vulnerability has been resolved: x86/hyperv: Disable IBT when hypercall page lacks ENDBR instruction On hardware that supports Indirect Branch Tracking (IBT), Hyper-V VMs with ConfigVersion 9.3 or later support IBT in the guest. However, current versions of Hyper-V have a bug in that there's not an ENDBR64 instruction at the beginning of the hypercall page. Since hypercalls are made with an indirect call to the hypercall page, all hypercall attempts fail with an exception and Linux panics. A Hyper-V fix is in progress to add ENDBR64. But guard against the Linux panic by clearing X86_FEATURE_IBT if the hypercall page doesn't start with ENDBR. The VM will boot and run without IBT. If future Linux 32-bit kernels were to support IBT, additional hypercall page hackery would be needed to make IBT work for such kernels in a Hyper-V VM.

In the Linux kernel, the following vulnerability has been resolved: quota: fix warning in dqgrab() There's issue as follows when do fault injection: WARNING: CPU: 1 PID: 14870 at include/linux/quotaops.h:51 dquot_disable+0x13b7/0x18c0 Modules linked in: CPU: 1 PID: 14870 Comm: fsconfig Not tainted 6.3.0-next-20230505-00006-g5107a9c821af-dirty #541 RIP: 0010:dquot_disable+0x13b7/0x18c0 RSP: 0018:ffffc9000acc79e0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88825e41b980 RDX: 0000000000000000 RSI: ffff88825e41b980 RDI: 0000000000000002 RBP: ffff888179f68000 R08: ffffffff82087ca7 R09: 0000000000000000 R10: 0000000000000001 R11: ffffed102f3ed026 R12: ffff888179f68130 R13: ffff888179f68110 R14: dffffc0000000000 R15: ffff888179f68118 FS: 00007f450a073740(0000) GS:ffff88882fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffe96f2efd8 CR3: 000000025c8ad000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> dquot_load_quota_sb+0xd53/0x1060 dquot_resume+0x172/0x230 ext4_reconfigure+0x1dc6/0x27b0 reconfigure_super+0x515/0xa90 __x64_sys_fsconfig+0xb19/0xd20 do_syscall_64+0x39/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd Above issue may happens as follows: ProcessA ProcessB ProcessC sys_fsconfig vfs_fsconfig_locked reconfigure_super ext4_remount dquot_suspend -> suspend all type quota sys_fsconfig vfs_fsconfig_locked reconfigure_super ext4_remount dquot_resume ret = dquot_load_quota_sb add_dquot_ref do_open -> open file O_RDWR vfs_open do_dentry_open get_write_access atomic_inc_unless_negative(&inode->i_writecount) ext4_file_open dquot_file_open dquot_initialize __dquot_initialize dqget atomic_inc(&dquot->dq_count); __dquot_initialize __dquot_initialize dqget if (!test_bit(DQ_ACTIVE_B, &dquot->dq_flags)) ext4_acquire_dquot -> Return error DQ_ACTIVE_B flag isn't set dquot_disable invalidate_dquots if (atomic_read(&dquot->dq_count)) dqgrab WARN_ON_ONCE(!test_bit(DQ_ACTIVE_B, &dquot->dq_flags)) -> Trigger warning In the above scenario, 'dquot->dq_flags' has no DQ_ACTIVE_B is normal when dqgrab(). To solve above issue just replace the dqgrab() use in invalidate_dquots() with atomic_inc(&dquot->dq_count).

In the Linux kernel, the following vulnerability has been resolved: of: unittest: fix null pointer dereferencing in of_unittest_find_node_by_name() when kmalloc() fail to allocate memory in kasprintf(), name or full_name will be NULL, strcmp() will cause null pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Array index may go out of bound Klocwork reports array 'vha->host_str' of size 16 may use index value(s) 16..19. Use snprintf() instead of sprintf().

In the Linux kernel, the following vulnerability has been resolved: btrfs: handle case when repair happens with dev-replace [BUG] There is a bug report that a BUG_ON() in btrfs_repair_io_failure() (originally repair_io_failure() in v6.0 kernel) got triggered when replacing a unreliable disk: BTRFS warning (device sda1): csum failed root 257 ino 2397453 off 39624704 csum 0xb0d18c75 expected csum 0x4dae9c5e mirror 3 kernel BUG at fs/btrfs/extent_io.c:2380! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 9 PID: 3614331 Comm: kworker/u257:2 Tainted: G OE 6.0.0-5-amd64 #1 Debian 6.0.10-2 Hardware name: Micro-Star International Co., Ltd. MS-7C60/TRX40 PRO WIFI (MS-7C60), BIOS 2.70 07/01/2021 Workqueue: btrfs-endio btrfs_end_bio_work [btrfs] RIP: 0010:repair_io_failure+0x24a/0x260 [btrfs] Call Trace: <TASK> clean_io_failure+0x14d/0x180 [btrfs] end_bio_extent_readpage+0x412/0x6e0 [btrfs] ? __switch_to+0x106/0x420 process_one_work+0x1c7/0x380 worker_thread+0x4d/0x380 ? rescuer_thread+0x3a0/0x3a0 kthread+0xe9/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 [CAUSE] Before the BUG_ON(), we got some read errors from the replace target first, note the mirror number (3, which is beyond RAID1 duplication, thus it's read from the replace target device). Then at the BUG_ON() location, we are trying to writeback the repaired sectors back the failed device. The check looks like this: ret = btrfs_map_block(fs_info, BTRFS_MAP_WRITE, logical, &map_length, &bioc, mirror_num); if (ret) goto out_counter_dec; BUG_ON(mirror_num != bioc->mirror_num); But inside btrfs_map_block(), we can modify bioc->mirror_num especially for dev-replace: if (dev_replace_is_ongoing && mirror_num == map->num_stripes + 1 && !need_full_stripe(op) && dev_replace->tgtdev != NULL) { ret = get_extra_mirror_from_replace(fs_info, logical, *length, dev_replace->srcdev->devid, &mirror_num, &physical_to_patch_in_first_stripe); patch_the_first_stripe_for_dev_replace = 1; } Thus if we're repairing the replace target device, we're going to trigger that BUG_ON(). But in reality, the read failure from the replace target device may be that, our replace hasn't reached the range we're reading, thus we're reading garbage, but with replace running, the range would be properly filled later. Thus in that case, we don't need to do anything but let the replace routine to handle it. [FIX] Instead of a BUG_ON(), just skip the repair if we're repairing the device replace target device.

In the Linux kernel, the following vulnerability has been resolved: media: v4l2-core: Fix a potential resource leak in v4l2_fwnode_parse_link() If fwnode_graph_get_remote_endpoint() fails, 'fwnode' is known to be NULL, so fwnode_handle_put() is a no-op. Release the reference taken from a previous fwnode_graph_get_port_parent() call instead. Also handle fwnode_graph_get_port_parent() failures. In order to fix these issues, add an error handling path to the function and the needed gotos.

In the Linux kernel, the following vulnerability has been resolved: btrfs: remove BUG_ON()'s in add_new_free_space() At add_new_free_space() we have these BUG_ON()'s that are there to deal with any failure to add free space to the in memory free space cache. Such failures are mostly -ENOMEM that should be very rare. However there's no need to have these BUG_ON()'s, we can just return any error to the caller and all callers and their upper call chain are already dealing with errors. So just make add_new_free_space() return any errors, while removing the BUG_ON()'s, and returning the total amount of added free space to an optional u64 pointer argument.

In the Linux kernel, the following vulnerability has been resolved: leds: led-core: Fix refcount leak in of_led_get() class_find_device_by_of_node() calls class_find_device(), it will take the reference, use the put_device() to drop the reference when not need anymore.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix null pointer panic in tracepoint in __replace_atomic_write_block We got a kernel panic if old_addr is NULL. https://bugzilla.kernel.org/show_bug.cgi?id=217266 BUG: kernel NULL pointer dereference, address: 0000000000000000 Call Trace: <TASK> f2fs_commit_atomic_write+0x619/0x990 [f2fs a1b985b80f5babd6f3ea778384908880812bfa43] __f2fs_ioctl+0xd8e/0x4080 [f2fs a1b985b80f5babd6f3ea778384908880812bfa43] ? vfs_write+0x2ae/0x3f0 ? vfs_write+0x2ae/0x3f0 __x64_sys_ioctl+0x91/0xd0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f69095fe53f

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix timeout of a call that hasn't yet been granted a channel afs_make_call() calls rxrpc_kernel_begin_call() to begin a call (which may get stalled in the background waiting for a connection to become available); it then calls rxrpc_kernel_set_max_life() to set the timeouts - but that starts the call timer so the call timer might then expire before we get a connection assigned - leading to the following oops if the call stalled: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... CPU: 1 PID: 5111 Comm: krxrpcio/0 Not tainted 6.3.0-rc7-build3+ #701 RIP: 0010:rxrpc_alloc_txbuf+0xc0/0x157 ... Call Trace: <TASK> rxrpc_send_ACK+0x50/0x13b rxrpc_input_call_event+0x16a/0x67d rxrpc_io_thread+0x1b6/0x45f ? _raw_spin_unlock_irqrestore+0x1f/0x35 ? rxrpc_input_packet+0x519/0x519 kthread+0xe7/0xef ? kthread_complete_and_exit+0x1b/0x1b ret_from_fork+0x22/0x30 Fix this by noting the timeouts in struct rxrpc_call when the call is created. The timer will be started when the first packet is transmitted. It shouldn't be possible to trigger this directly from userspace through AF_RXRPC as sendmsg() will return EBUSY if the call is in the waiting-for-conn state if it dropped out of the wait due to a signal.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/adreno: Fix null ptr access in adreno_gpu_cleanup() Fix the below kernel panic due to null pointer access: [ 18.504431] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000048 [ 18.513464] Mem abort info: [ 18.516346] ESR = 0x0000000096000005 [ 18.520204] EC = 0x25: DABT (current EL), IL = 32 bits [ 18.525706] SET = 0, FnV = 0 [ 18.528878] EA = 0, S1PTW = 0 [ 18.532117] FSC = 0x05: level 1 translation fault [ 18.537138] Data abort info: [ 18.540110] ISV = 0, ISS = 0x00000005 [ 18.544060] CM = 0, WnR = 0 [ 18.547109] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000112826000 [ 18.553738] [0000000000000048] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 18.562690] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP **Snip** [ 18.696758] Call trace: [ 18.699278] adreno_gpu_cleanup+0x30/0x88 [ 18.703396] a6xx_destroy+0xc0/0x130 [ 18.707066] a6xx_gpu_init+0x308/0x424 [ 18.710921] adreno_bind+0x178/0x288 [ 18.714590] component_bind_all+0xe0/0x214 [ 18.718797] msm_drm_bind+0x1d4/0x614 [ 18.722566] try_to_bring_up_aggregate_device+0x16c/0x1b8 [ 18.728105] __component_add+0xa0/0x158 [ 18.732048] component_add+0x20/0x2c [ 18.735719] adreno_probe+0x40/0xc0 [ 18.739300] platform_probe+0xb4/0xd4 [ 18.743068] really_probe+0xfc/0x284 [ 18.746738] __driver_probe_device+0xc0/0xec [ 18.751129] driver_probe_device+0x48/0x110 [ 18.755421] __device_attach_driver+0xa8/0xd0 [ 18.759900] bus_for_each_drv+0x90/0xdc [ 18.763843] __device_attach+0xfc/0x174 [ 18.767786] device_initial_probe+0x20/0x2c [ 18.772090] bus_probe_device+0x40/0xa0 [ 18.776032] deferred_probe_work_func+0x94/0xd0 [ 18.780686] process_one_work+0x190/0x3d0 [ 18.784805] worker_thread+0x280/0x3d4 [ 18.788659] kthread+0x104/0x1c0 [ 18.791981] ret_from_fork+0x10/0x20 [ 18.795654] Code: f9400408 aa0003f3 aa1f03f4 91142015 (f9402516) [ 18.801913] ---[ end trace 0000000000000000 ]--- [ 18.809039] Kernel panic - not syncing: Oops: Fatal exception Patchwork: https://patchwork.freedesktop.org/patch/515605/

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix slab-out-of-bounds in init_smb2_rsp_hdr When smb1 mount fails, KASAN detect slab-out-of-bounds in init_smb2_rsp_hdr like the following one. For smb1 negotiate(56bytes) , init_smb2_rsp_hdr() for smb2 is called. The issue occurs while handling smb1 negotiate as smb2 server operations. Add smb server operations for smb1 (get_cmd_val, init_rsp_hdr, allocate_rsp_buf, check_user_session) to handle smb1 negotiate so that smb2 server operation does not handle it. [ 411.400423] CIFS: VFS: Use of the less secure dialect vers=1.0 is not recommended unless required for access to very old servers [ 411.400452] CIFS: Attempting to mount \\192.168.45.139\homes [ 411.479312] ksmbd: init_smb2_rsp_hdr : 492 [ 411.479323] ================================================================== [ 411.479327] BUG: KASAN: slab-out-of-bounds in init_smb2_rsp_hdr+0x1e2/0x1f4 [ksmbd] [ 411.479369] Read of size 16 at addr ffff888488ed0734 by task kworker/14:1/199 [ 411.479379] CPU: 14 PID: 199 Comm: kworker/14:1 Tainted: G OE 6.1.21 #3 [ 411.479386] Hardware name: ASUSTeK COMPUTER INC. Z10PA-D8 Series/Z10PA-D8 Series, BIOS 3801 08/23/2019 [ 411.479390] Workqueue: ksmbd-io handle_ksmbd_work [ksmbd] [ 411.479425] Call Trace: [ 411.479428] <TASK> [ 411.479432] dump_stack_lvl+0x49/0x63 [ 411.479444] print_report+0x171/0x4a8 [ 411.479452] ? kasan_complete_mode_report_info+0x3c/0x200 [ 411.479463] ? init_smb2_rsp_hdr+0x1e2/0x1f4 [ksmbd] [ 411.479497] kasan_report+0xb4/0x130 [ 411.479503] ? init_smb2_rsp_hdr+0x1e2/0x1f4 [ksmbd] [ 411.479537] kasan_check_range+0x149/0x1e0 [ 411.479543] memcpy+0x24/0x70 [ 411.479550] init_smb2_rsp_hdr+0x1e2/0x1f4 [ksmbd] [ 411.479585] handle_ksmbd_work+0x109/0x760 [ksmbd] [ 411.479616] ? _raw_spin_unlock_irqrestore+0x50/0x50 [ 411.479624] ? smb3_encrypt_resp+0x340/0x340 [ksmbd] [ 411.479656] process_one_work+0x49c/0x790 [ 411.479667] worker_thread+0x2b1/0x6e0 [ 411.479674] ? process_one_work+0x790/0x790 [ 411.479680] kthread+0x177/0x1b0 [ 411.479686] ? kthread_complete_and_exit+0x30/0x30 [ 411.479692] ret_from_fork+0x22/0x30 [ 411.479702] </TASK>