CVE Feed

Integer overflow in XML in Google Chrome on Windows prior to 148.0.7778.216 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High)

Use after free in Network in Google Chrome prior to 148.0.7778.216 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: Critical)

Use after free in Extensions in Google Chrome prior to 148.0.7778.216 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted Chrome Extension. (Chromium security severity: Critical)

Use after free in Skia in Google Chrome prior to 148.0.7778.216 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Critical)

In the Linux kernel, the following vulnerability has been resolved: RDMA/uverbs: Validate wqe_size before using it in ib_uverbs_post_send ib_uverbs_post_send() uses cmd.wqe_size from userspace without any validation before passing it to kmalloc() and using the allocated buffer as struct ib_uverbs_send_wr. If a user provides a small wqe_size value (e.g., 1), kmalloc() will succeed, but subsequent accesses to user_wr->opcode, user_wr->num_sge, and other fields will read beyond the allocated buffer, resulting in an out-of-bounds read from kernel heap memory. This could potentially leak sensitive kernel information to userspace. Additionally, providing an excessively large wqe_size can trigger a WARNING in the memory allocation path, as reported by syzkaller. This is inconsistent with ib_uverbs_unmarshall_recv() which properly validates that wqe_size >= sizeof(struct ib_uverbs_recv_wr) before proceeding. Add the same validation for ib_uverbs_post_send() to ensure wqe_size is at least sizeof(struct ib_uverbs_send_wr).

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conncount: increase the connection clean up limit to 64 After the optimization to only perform one GC per jiffy, a new problem was introduced. If more than 8 new connections are tracked per jiffy the list won't be cleaned up fast enough possibly reaching the limit wrongly. In order to prevent this issue, only skip the GC if it was already triggered during the same jiffy and the increment is lower than the clean up limit. In addition, increase the clean up limit to 64 connections to avoid triggering GC too often and do more effective GCs. This has been tested using a HTTP server and several performance tools while having nft_connlimit/xt_connlimit or OVS limit configured. Output of slowhttptest + OVS limit at 52000 connections: slow HTTP test status on 340th second: initializing: 0 pending: 432 connected: 51998 error: 0 closed: 0 service available: YES

In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Hold mm structure across iommu_sva_unbind_device() Some tests trigger a crash in iommu_sva_unbind_device() due to accessing iommu_mm after the associated mm structure has been freed. Fix this by taking an explicit reference to the mm structure after successfully binding the device, and releasing it only after the device is unbound. This ensures the mm remains valid for the entire SVA bind/unbind lifetime.

In the Linux kernel, the following vulnerability has been resolved: RDMA/iwcm: Fix workqueue list corruption by removing work_list The commit e1168f0 ("RDMA/iwcm: Simplify cm_event_handler()") changed the work submission logic to unconditionally call queue_work() with the expectation that queue_work() would have no effect if work was already pending. The problem is that a free list of struct iwcm_work is used (for which struct work_struct is embedded), so each call to queue_work() is basically unique and therefore does indeed queue the work. This causes a problem in the work handler which walks the work_list until it's empty to process entries. This means that a single run of the work handler could process item N+1 and release it back to the free list while the actual workqueue entry is still queued. It could then get reused (INIT_WORK...) and lead to list corruption in the workqueue logic. Fix this by just removing the work_list. The workqueue already does this for us. This fixes the following error that was observed when stress testing with ucmatose on an Intel E830 in iWARP mode: [ 151.465780] list_del corruption. next->prev should be ffff9f0915c69c08, but was ffff9f0a1116be08. (next=ffff9f0a15b11c08) [ 151.466639] ------------[ cut here ]------------ [ 151.466986] kernel BUG at lib/list_debug.c:67! [ 151.467349] Oops: invalid opcode: 0000 [#1] SMP NOPTI [ 151.467753] CPU: 14 UID: 0 PID: 2306 Comm: kworker/u64:18 Not tainted 6.19.0-rc4+ #1 PREEMPT(voluntary) [ 151.468466] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 151.469192] Workqueue: 0x0 (iw_cm_wq) [ 151.469478] RIP: 0010:__list_del_entry_valid_or_report+0xf0/0x100 [ 151.469942] Code: c7 58 5f 4c b2 e8 10 50 aa ff 0f 0b 48 89 ef e8 36 57 cb ff 48 8b 55 08 48 89 e9 48 89 de 48 c7 c7 a8 5f 4c b2 e8 f0 4f aa ff <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 90 90 90 90 90 90 [ 151.471323] RSP: 0000:ffffb15644e7bd68 EFLAGS: 00010046 [ 151.471712] RAX: 000000000000006d RBX: ffff9f0915c69c08 RCX: 0000000000000027 [ 151.472243] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9f0a37d9c600 [ 151.472768] RBP: ffff9f0a15b11c08 R08: 0000000000000000 R09: c0000000ffff7fff [ 151.473294] R10: 0000000000000001 R11: ffffb15644e7bba8 R12: ffff9f092339ee68 [ 151.473817] R13: ffff9f0900059c28 R14: ffff9f092339ee78 R15: 0000000000000000 [ 151.474344] FS: 0000000000000000(0000) GS:ffff9f0a847b5000(0000) knlGS:0000000000000000 [ 151.474934] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 151.475362] CR2: 0000559e233a9088 CR3: 000000020296b004 CR4: 0000000000770ef0 [ 151.475895] PKRU: 55555554 [ 151.476118] Call Trace: [ 151.476331] <TASK> [ 151.476497] move_linked_works+0x49/0xa0 [ 151.476792] __pwq_activate_work.isra.46+0x2f/0xa0 [ 151.477151] pwq_dec_nr_in_flight+0x1e0/0x2f0 [ 151.477479] process_scheduled_works+0x1c8/0x410 [ 151.477823] worker_thread+0x125/0x260 [ 151.478108] ? __pfx_worker_thread+0x10/0x10 [ 151.478430] kthread+0xfe/0x240 [ 151.478671] ? __pfx_kthread+0x10/0x10 [ 151.478955] ? __pfx_kthread+0x10/0x10 [ 151.479240] ret_from_fork+0x208/0x270 [ 151.479523] ? __pfx_kthread+0x10/0x10 [ 151.479806] ret_from_fork_asm+0x1a/0x30 [ 151.480103] </TASK>

In the Linux kernel, the following vulnerability has been resolved: ext4: drop extent cache after doing PARTIAL_VALID1 zeroout When splitting an unwritten extent in the middle and converting it to initialized in ext4_split_extent() with the EXT4_EXT_MAY_ZEROOUT and EXT4_EXT_DATA_VALID2 flags set, it could leave a stale unwritten extent. Assume we have an unwritten file and buffered write in the middle of it without dioread_nolock enabled, it will allocate blocks as written extent. 0 A B N [UUUUUUUUUUUU] on-disk extent U: unwritten extent [UUUUUUUUUUUU] extent status tree [--DDDDDDDD--] D: valid data |<- ->| ----> this range needs to be initialized ext4_split_extent() first try to split this extent at B with EXT4_EXT_DATA_PARTIAL_VALID1 and EXT4_EXT_MAY_ZEROOUT flag set, but ext4_split_extent_at() failed to split this extent due to temporary lack of space. It zeroout B to N and leave the entire extent as unwritten. 0 A B N [UUUUUUUUUUUU] on-disk extent [UUUUUUUUUUUU] extent status tree [--DDDDDDDDZZ] Z: zeroed data ext4_split_extent() then try to split this extent at A with EXT4_EXT_DATA_VALID2 flag set. This time, it split successfully and leave an written extent from A to N. 0 A B N [UUWWWWWWWWWW] on-disk extent W: written extent [UUUUUUUUUUUU] extent status tree [--DDDDDDDDZZ] Finally ext4_map_create_blocks() only insert extent A to B to the extent status tree, and leave an stale unwritten extent in the status tree. 0 A B N [UUWWWWWWWWWW] on-disk extent W: written extent [UUWWWWWWWWUU] extent status tree [--DDDDDDDDZZ] Fix this issue by always cached extent status entry after zeroing out the second part.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Fix slab-out-of-bounds read in DeleteIndexEntryRoot In the 'DeleteIndexEntryRoot' case of the 'do_action' function, the entry size ('esize') is retrieved from the log record without adequate bounds checking. Specifically, the code calculates the end of the entry ('e2') using: e2 = Add2Ptr(e1, esize); It then calculates the size for memmove using 'PtrOffset(e2, ...)', which subtracts the end pointer from the buffer limit. If 'esize' is maliciously large, 'e2' exceeds the used buffer size. This results in a negative offset which, when cast to size_t for memmove, interprets as a massive unsigned integer, leading to a heap buffer overflow. This commit adds a check to ensure that the entry size ('esize') strictly fits within the remaining used space of the index header before performing memory operations.

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Clear Present bit before tearing down context entry When tearing down a context entry, the current implementation zeros the entire 128-bit entry using multiple 64-bit writes. This creates a window where the hardware can fetch a "torn" entry — where some fields are already zeroed while the 'Present' bit is still set — leading to unpredictable behavior or spurious faults. While x86 provides strong write ordering, the compiler may reorder writes to the two 64-bit halves of the context entry. Even without compiler reordering, the hardware fetch is not guaranteed to be atomic with respect to multiple CPU writes. Align with the "Guidance to Software for Invalidations" in the VT-d spec (Section 6.5.3.3) by implementing the recommended ownership handshake: 1. Clear only the 'Present' (P) bit of the context entry first to signal the transition of ownership from hardware to software. 2. Use dma_wmb() to ensure the cleared bit is visible to the IOMMU. 3. Perform the required cache and context-cache invalidation to ensure hardware no longer has cached references to the entry. 4. Fully zero out the entry only after the invalidation is complete. Also, add a dma_wmb() to context_set_present() to ensure the entry is fully initialized before the 'Present' bit becomes visible.

In the Linux kernel, the following vulnerability has been resolved: drm/exynos: vidi: fix to avoid directly dereferencing user pointer In vidi_connection_ioctl(), vidi->edid(user pointer) is directly dereferenced in the kernel. This allows arbitrary kernel memory access from the user space, so instead of directly accessing the user pointer in the kernel, we should modify it to copy edid to kernel memory using copy_from_user() and use it.

In the Linux kernel, the following vulnerability has been resolved: media: mtk-jpeg: fix use-after-free in release path due to uncancelled work The mtk_jpeg_release() function frees the context structure (ctx) without first cancelling any pending or running work in ctx->jpeg_work. This creates a race window where the workqueue callback may still be accessing the context memory after it has been freed. Race condition: CPU 0 (release) CPU 1 (workqueue) ---------------- ------------------ close() mtk_jpeg_release() mtk_jpegenc_worker() ctx = work->data // accessing ctx kfree(ctx) // freed! access ctx // UAF! The work is queued via queue_work() during JPEG encode/decode operations (via mtk_jpeg_device_run). If the device is closed while work is pending or running, the work handler will access freed memory. Fix this by calling cancel_work_sync() BEFORE acquiring the mutex. This ordering is critical: if cancel_work_sync() is called after mutex_lock(), and the work handler also tries to acquire the same mutex, it would cause a deadlock. Note: The open error path does NOT need cancel_work_sync() because INIT_WORK() only initializes the work structure - it does not schedule it. Work is only scheduled later during ioctl operations.

In the Linux kernel, the following vulnerability has been resolved: vfio/cdx: Serialize VFIO_DEVICE_SET_IRQS with a per-device mutex vfio_cdx_set_msi_trigger() reads vdev->config_msi and operates on the vdev->cdx_irqs array based on its value, but provides no serialization against concurrent VFIO_DEVICE_SET_IRQS ioctls. Two callers can race such that one observes config_msi as set while another clears it and frees cdx_irqs via vfio_cdx_msi_disable(), resulting in a use-after-free of the cdx_irqs array. Add a cdx_irqs_lock mutex to struct vfio_cdx_device and acquire it in vfio_cdx_set_msi_trigger(), which is the single chokepoint through which all updates to config_msi, cdx_irqs, and msi_count flow, covering both the ioctl path and the close-device cleanup path. This keeps the test of config_msi atomic with the subsequent enable, disable, or trigger operations. Drop the pre-call !cdx_irqs test from vfio_cdx_irqs_cleanup() as part of this change: the optimization it provided is redundant with the !config_msi early-return inside vfio_cdx_msi_disable(), and leaving the test in place would be an unsynchronized read of state the new lock is meant to protect.

In the Linux kernel, the following vulnerability has been resolved: ceph: only d_add() negative dentries when they are unhashed Ceph can call d_add(dentry, NULL) on a negative dentry that is already present in the primary dcache hash. In the current VFS that is not safe. d_add() goes through __d_add() to __d_rehash(), which unconditionally reinserts dentry->d_hash into the hlist_bl bucket. If the dentry is already hashed, reinserting the same node can corrupt the bucket, including creating a self-loop. Once that happens, __d_lookup() can spin forever in the hlist_bl walk, typically looping only on the d_name.hash mismatch check and eventually triggering RCU stall reports like this one: rcu: INFO: rcu_sched self-detected stall on CPU rcu: 87-....: (2100 ticks this GP) idle=3a4c/1/0x4000000000000000 softirq=25003319/25003319 fqs=829 rcu: (t=2101 jiffies g=79058445 q=698988 ncpus=192) CPU: 87 UID: 2952868916 PID: 3933303 Comm: php-cgi8.3 Not tainted 6.18.17-i1-amd #950 NONE Hardware name: Dell Inc. PowerEdge R7615/0G9DHV, BIOS 1.6.6 09/22/2023 RIP: 0010:__d_lookup+0x46/0xb0 Code: c1 e8 07 48 8d 04 c2 48 8b 00 49 89 fc 49 89 f5 48 89 c3 48 83 e3 fe 48 83 f8 01 77 0f eb 2d 0f 1f 44 00 00 48 8b 1b 48 85 db <74> 20 39 6b 18 75 f3 48 8d 7b 78 e8 ba 85 d0 00 4c 39 63 10 74 1f RSP: 0018:ff745a70c8253898 EFLAGS: 00000282 RAX: ff26e470054cb208 RBX: ff26e470054cb208 RCX: 000000006e958966 RDX: ff26e48267340000 RSI: ff745a70c82539b0 RDI: ff26e458f74655c0 RBP: 000000006e958966 R08: 0000000000000180 R09: 9cd08d909b919a89 R10: ff26e458f74655c0 R11: 0000000000000000 R12: ff26e458f74655c0 R13: ff745a70c82539b0 R14: d0d0d0d0d0d0d0d0 R15: 2f2f2f2f2f2f2f2f FS: 00007f5770896980(0000) GS:ff26e482c5d88000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f5764de50c0 CR3: 000000a72abb5001 CR4: 0000000000771ef0 PKRU: 55555554 Call Trace: <TASK> lookup_fast+0x9f/0x100 walk_component+0x1f/0x150 link_path_walk+0x20e/0x3d0 path_lookupat+0x68/0x180 filename_lookup+0xdc/0x1e0 vfs_statx+0x6c/0x140 vfs_fstatat+0x67/0xa0 __do_sys_newfstatat+0x24/0x60 do_syscall_64+0x6a/0x230 entry_SYSCALL_64_after_hwframe+0x76/0x7e This is reachable with reused cached negative dentries. A Ceph lookup or atomic_open can be handed a negative dentry that is already hashed, and fs/ceph/dir.c then hits one of two paths that incorrectly assume "negative" also means "unhashed": - ceph_finish_lookup(): MDS reply is -ENOENT with no trace -> d_add(dentry, NULL) - ceph_lookup(): local ENOENT fast path for a complete directory with shared caps -> d_add(dentry, NULL) Both paths can therefore re-add an already-hashed negative dentry. Ceph already uses the correct pattern elsewhere: ceph_fill_trace() only calls d_add(dn, NULL) for a negative null-dentry reply when d_unhashed(dn) is true. Fix both fs/ceph/dir.c sites the same way: only call d_add() for a negative dentry when it is actually unhashed. If the negative dentry is already hashed, leave it in place and reuse it as-is. This preserves the existing behavior for unhashed dentries while avoiding d_hash list corruption for reused hashed negatives.

In the Linux kernel, the following vulnerability has been resolved: md/raid5: validate payload size before accessing journal metadata r5c_recovery_analyze_meta_block() and r5l_recovery_verify_data_checksum_for_mb() iterate over payloads in a journal metadata block using on-disk payload size fields without validating them against the remaining space in the metadata block. A corrupted journal contains payload sizes extending beyond the PAGE_SIZE boundary can cause out-of-bounds reads when accessing payload fields or computing offsets. Add bounds validation for each payload type to ensure the full payload fits within meta_size before processing.

In the Linux kernel, the following vulnerability has been resolved: media: amphion: Fix race between m2m job_abort and device_run Fix kernel panic caused by race condition where v4l2_m2m_ctx_release() frees m2m_ctx while v4l2_m2m_try_run() is about to call device_run with the same context. Race sequence: v4l2_m2m_try_run(): v4l2_m2m_ctx_release(): lock/unlock v4l2_m2m_cancel_job() job_abort() v4l2_m2m_job_finish() kfree(m2m_ctx) <- frees ctx device_run() <- use-after-free crash at 0x538 Crash trace: Unable to handle kernel read from unreadable memory at virtual address 0000000000000538 v4l2_m2m_try_run+0x78/0x138 v4l2_m2m_device_run_work+0x14/0x20 The amphion vpu driver does not rely on the m2m framework's device_run callback to perform encode/decode operations. Fix the race by preventing m2m framework job scheduling entirely: - Add job_ready callback returning 0 (no jobs ready for m2m framework) - Remove job_abort callback to avoid the race condition

In the Linux kernel, the following vulnerability has been resolved: fs: afs: revert mmap_prepare() change Partially reverts commit 9d5403b1036c ("fs: convert most other generic_file_*mmap() users to .mmap_prepare()"). This is because the .mmap invocation establishes a refcount, but .mmap_prepare is called at a point where a merge or an allocation failure might happen after the call, which would leak the refcount increment. Functionality is being added to permit the use of .mmap_prepare in this case, but in the interim, we need to fix this.

In the Linux kernel, the following vulnerability has been resolved: ntfs3: fix integer overflow in run_unpack() volume boundary check The volume boundary check `lcn + len > sbi->used.bitmap.nbits` uses raw addition which can wrap around for large lcn and len values, bypassing the validation. Use check_add_overflow() as is already done for the adjacent prev_lcn + dlcn and vcn64 + len checks added by commit 3ac37e100385 ("ntfs3: Fix integer overflow in run_unpack()"). Found by fuzzing with a source-patched harness (LibAFL + QEMU).

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix error handling in rxgk_extract_token() Fix a missing bit of error handling in rxgk_extract_token(): in the event that rxgk_decrypt_skb() returns -ENOMEM, it should just return that rather than continuing on (for anything else, it generates an abort).

In the Linux kernel, the following vulnerability has been resolved: erofs: fix unsigned underflow in z_erofs_lz4_handle_overlap() Some crafted images can have illegal (!partial_decoding && m_llen < m_plen) extents, and the LZ4 inplace decompression path can be wrongly hit, but it cannot handle (outpages < inpages) properly: "outpages - inpages" wraps to a large value and the subsequent rq->out[] access reads past the decompressed_pages array. However, such crafted cases can correctly result in a corruption report in the normal LZ4 non-inplace path. Let's add an additional check to fix this for backporting. Reproducible image (base64-encoded gzipped blob): H4sIAJGR12kCA+3SPUoDQRgG4MkmkkZk8QRbRFIIi9hbpEjrHQI5ghfwCN5BLCzTGtLbBI+g dilSJo1CnIm7GEXFxhT6PDDwfrs73/ywIQD/1ePD4r7Ou6ETsrq4mu7XcWfj++Pb58nJU/9i PNtbjhan04/9GtX4qVYc814WDqt6FaX5s+ZwXXeq52lndT6IuVvlblytLMvh4Gzwaf90nsvz 2DF/21+20T/ldgp5s1jXRaN4t/8izsy/OUB6e/Qa79r+JwAAAAAAAL52vQVuGQAAAP6+my1w ywAAAAAAAADwu14ATsEYtgBQAAA= $ mount -t erofs -o cache_strategy=disabled foo.erofs /mnt $ dd if=/mnt/data of=/dev/null bs=4096 count=1

Netis AC1200 Router NC21 V4.0.1.4296 contains a hard-coded root credential stored in /etc/shadow.sample. The password for the root account is set to the trivially weak value root, allowing an attacker with access to the device to authenticate as root and gain full control of the underlying operating system.

Netis AC1200 Router NC21 V4.0.1.4296 is vulnerable to unauthenticated command injection via the /cgi-bin/skk_set.cgi endpoint. The password and new_pwd_confirm POST parameters are passed directly to the underlying OS shell without sanitization. An attacker can inject arbitrary shell commands by wrapping them in backticks (`) and encoding them in base64. Because the endpoint requires no authentication, any device on the LAN can achieve full Remote Code Execution on the router's operating system with a single HTTP POST request.

Insecure Permissions vulnerability in kvf-admin v1.0.0 allows a remote attacker to escalate privileges via the UserController.java component

Use after free in Views in Google Chrome prior to 148.0.7778.216 allowed a remote attacker who convinced a user to engage in specific UI gestures to execute arbitrary code via a crafted HTML page. (Chromium security severity: High)

Use after free in SVG in Google Chrome prior to 148.0.7778.216 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High)

Integer overflow in WTF in Google Chrome prior to 148.0.7778.216 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High)

Command injection in Raynet rvia version 12.6 Update 8 and previous versions allows adversaries to execute arbitrary code via a crafted path that matches the improperly terminated search criteria of rvia's Java search using the find command.

In the Linux kernel, the following vulnerability has been resolved: bareudp: fix NULL pointer dereference in bareudp_fill_metadata_dst() bareudp_fill_metadata_dst() passes bareudp->sock to udp_tunnel6_dst_lookup() in the IPv6 path without a NULL check. The socket is only created in bareudp_open() and NULLed in bareudp_stop(), so calling this function while the device is down triggers a NULL dereference via sock->sk. BUG: kernel NULL pointer dereference, address: 0000000000000018 RIP: 0010:udp_tunnel6_dst_lookup (net/ipv6/ip6_udp_tunnel.c:160) Call Trace: <TASK> bareudp_fill_metadata_dst (drivers/net/bareudp.c:532) do_execute_actions (net/openvswitch/actions.c:901) ovs_execute_actions (net/openvswitch/actions.c:1589) ovs_packet_cmd_execute (net/openvswitch/datapath.c:700) genl_family_rcv_msg_doit (net/netlink/genetlink.c:1114) genl_rcv_msg (net/netlink/genetlink.c:1209) netlink_rcv_skb (net/netlink/af_netlink.c:2550) </TASK> Add a NULL check returning -ESHUTDOWN, consistent with the xmit paths in the same driver.

In the Linux kernel, the following vulnerability has been resolved: misc: ibmasm: fix OOB MMIO read in ibmasm_handle_mouse_interrupt() ibmasm_handle_mouse_interrupt() performs an out-of-bounds MMIO read when the queue reader or writer index from hardware exceeds REMOTE_QUEUE_SIZE (60). A compromised service processor can trigger this by writing an out-of-range value to the reader or writer MMIO register before asserting an interrupt. Since writer is re-read from hardware on every loop iteration, it can also be set to an out-of-range value after the loop has already started. The root cause is that get_queue_reader() and get_queue_writer() return raw readl() values that are passed directly into get_queue_entry(), which computes: queue_begin + reader * sizeof(struct remote_input) with no bounds check. This unchecked MMIO address is then passed to memcpy_fromio(), reading 8 bytes from unintended device registers. For sufficiently large values the address falls outside the PCI BAR mapping entirely, triggering a machine check exception. Fix by checking both indices against REMOTE_QUEUE_SIZE at the top of the loop body, before any call to get_queue_entry(). On an out-of-range value, reset the reader register to 0 via set_queue_reader() before breaking, so that normal queue operation can resume if the corrupted hardware state is transient.

In the Linux kernel, the following vulnerability has been resolved: crypto: atmel-aes - Fix 3-page memory leak in atmel_aes_buff_cleanup atmel_aes_buff_init() allocates 4 pages using __get_free_pages() with ATMEL_AES_BUFFER_ORDER, but atmel_aes_buff_cleanup() frees only the first page using free_page(), leaking the remaining 3 pages. Use free_pages() with ATMEL_AES_BUFFER_ORDER to fix the memory leak.

In the Linux kernel, the following vulnerability has been resolved: net: qrtr: ns: Fix use-after-free in driver remove() In the remove callback, if a packet arrives after destroy_workqueue() is called, but before sock_release(), the qrtr_ns_data_ready() callback will try to queue the work, causing use-after-free issue. Fix this issue by saving the default 'sk_data_ready' callback during qrtr_ns_init() and use it to replace the qrtr_ns_data_ready() callback at the start of remove(). This ensures that even if a packet arrives after destroy_workqueue(), the work struct will not be dereferenced. Note that it is also required to ensure that the RX threads are completed before destroying the workqueue, because the threads could be using the qrtr_ns_data_ready() callback.

In the Linux kernel, the following vulnerability has been resolved: crypto: atmel-sha204a - Fix potential UAF and memory leak in remove path Unregister the hwrng to prevent new ->read() calls and flush the Atmel I2C workqueue before teardown to prevent a potential UAF if a queued callback runs while the device is being removed. Drop the early return to ensure sysfs entries are removed and ->hwrng.priv is freed, preventing a memory leak.

In the Linux kernel, the following vulnerability has been resolved: crypto: atmel-tdes - fix DMA sync direction Before DMA output is consumed by the CPU, ->dma_addr_out must be synced with dma_sync_single_for_cpu() instead of dma_sync_single_for_device(). Using the wrong direction can return stale cache data on non-coherent platforms.

Insufficient validation of untrusted input in ANGLE in Google Chrome prior to 148.0.7778.216 allowed a remote attacker to execute arbitrary code via a crafted HTML page. (Chromium security severity: High)

Out of bounds read and write in ANGLE in Google Chrome prior to 148.0.7778.216 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High)

Use after free in WebAppInstalls in Google Chrome on Mac prior to 148.0.7778.216 allowed a remote attacker who convinced a user to engage in specific UI gestures to execute arbitrary code via a crafted HTML page. (Chromium security severity: High)

Use after free in WebView in Google Chrome on Android prior to 148.0.7778.216 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Critical)

Out of bounds read and write in Dawn in Google Chrome on Android prior to 148.0.7778.216 allowed a remote attacker to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Critical)

Integer overflow in ANGLE in Google Chrome prior to 148.0.7778.216 allowed a remote attacker to perform an out of bounds memory read via a crafted HTML page. (Chromium security severity: High)

Use after free in iOS in Google Chrome on iOS prior to 148.0.7778.216 allowed a remote attacker who convinced a user to engage in specific UI gestures to execute arbitrary code via a crafted HTML page. (Chromium security severity: High)

Uninitialized Use in iOS in Google Chrome on iOS prior to 148.0.7778.216 allowed a remote attacker who convinced a user to engage in specific UI gestures to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High)

Use after free in Passwords in Google Chrome on Windows prior to 148.0.7778.216 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High)

Inappropriate implementation in Skia in Google Chrome prior to 148.0.7778.216 allowed a remote attacker who had compromised the renderer process to leak cross-origin data via a crafted HTML page. (Chromium security severity: High)

Type Confusion in V8 in Google Chrome prior to 148.0.7778.216 allowed an attacker who convinced a user to install a malicious extension to execute arbitrary code inside a sandbox via a crafted Chrome Extension. (Chromium security severity: Medium)

This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

In the Linux kernel, the following vulnerability has been resolved: eth: fbnic: Add validation for MTU changes Increasing the MTU beyond the HDS threshold causes the hardware to fragment packets across multiple buffers. If a single-buffer XDP program is attached, the driver will drop all multi-frag frames. While we can't prevent a remote sender from sending non-TCP packets larger than the MTU, this will prevent users from inadvertently breaking new TCP streams. Traditionally, drivers supported XDP with MTU less than 4Kb (packet per page). Fbnic currently prevents attaching XDP when MTU is too high. But it does not prevent increasing MTU after XDP is attached.

In the Linux kernel, the following vulnerability has been resolved: SUNRPC: fix gss_auth kref leak in gss_alloc_msg error path Commit 5940d1cf9f42 ("SUNRPC: Rebalance a kref in auth_gss.c") added a kref_get(&gss_auth->kref) call to balance the gss_put_auth() done in gss_release_msg(), but forgot to add a corresponding kref_put() on the error path when kstrdup_const() fails. If service_name is non-NULL and kstrdup_const() fails, the function jumps to err_put_pipe_version which calls put_pipe_version() and kfree(gss_msg), but never releases the gss_auth reference. This leads to a kref leak where the gss_auth structure is never freed. Add a forward declaration for gss_free_callback() and call kref_put() in the err_put_pipe_version error path to properly release the reference taken earlier.

In the Linux kernel, the following vulnerability has been resolved: fbnic: close fw_log race between users and teardown Fixes a theoretical race on fw_log between the teardown path and fw_log write functions. fw_log is written inside fbnic_fw_log_write() and can be reached from the mailbox handler fbnic_fw_msix_intr(), but fw_log is freed before IRQ/MBX teardown during cleanup, resulting in a potential data race of dereferencing a freed/null variable. Possible Interleaving Scenario: CPU0: fbnic_fw_msix_intr() // Entry fbnic_fw_log_write() if (fbnic_fw_log_ready()) // true ... preempt ... CPU1: fbnic_remove() // Entry fbnic_fw_log_free() vfree(log->data_start); log->data_start = NULL; CPU0: continues, walks log->entries or writes to log->data_start The initialization also has an incorrect order problem, as the fw_log is currently allocated after MBX setup during initialization. Fix the problems by adjusting the synchronization order to put initialization in place before the mailbox is enabled, and not cleared until after the mailbox has been disabled.

In the Linux kernel, the following vulnerability has been resolved: jbd2: fix deadlock in jbd2_journal_cancel_revoke() Commit f76d4c28a46a ("fs/jbd2: use sleeping version of __find_get_block()") changed jbd2_journal_cancel_revoke() to use __find_get_block_nonatomic() which holds the folio lock instead of i_private_lock. This breaks the lock ordering (folio -> buffer) and causes an ABBA deadlock when the filesystem blocksize < pagesize: T1 T2 ext4_mkdir() ext4_init_new_dir() ext4_append() ext4_getblk() lock_buffer() <- A sync_blockdev() blkdev_writepages() writeback_iter() writeback_get_folio() folio_lock() <- B ext4_journal_get_create_access() jbd2_journal_cancel_revoke() __find_get_block_nonatomic() folio_lock() <- B block_write_full_folio() lock_buffer() <- A This can occasionally cause generic/013 to hang. Fix by only calling __find_get_block_nonatomic() when the passed buffer_head doesn't belong to the bdev, which is the only case that we need to look up its bdev alias. Otherwise, the lookup is redundant since the found buffer_head is equal to the one we passed in.