CVE Feed

In the Linux kernel, the following vulnerability has been resolved: mt76: mt7921: don't assume adequate headroom for SDIO headers mt7921_usb_sdio_tx_prepare_skb() calls mt7921_usb_sdio_write_txwi() and mt7921_skb_add_usb_sdio_hdr(), both of which blindly assume that adequate headroom will be available in the passed skb. This assumption typically is satisfied when the skb was allocated in the net core for transmission via the mt7921 netdev (although even that is only an optimization and is not strictly guaranteed), but the assumption is sometimes not satisfied when the skb originated in the receive path of another netdev and was passed through to the mt7921, such as by the bridge layer. Blindly prepending bytes to an skb is always wrong. This commit introduces a call to skb_cow_head() before the call to mt7921_usb_sdio_write_txwi() in mt7921_usb_sdio_tx_prepare_skb() to ensure that at least MT_SDIO_TXD_SIZE + MT_SDIO_HDR_SIZE bytes can be pushed onto the skb. Without this fix, I can trivially cause kernel panics by bridging an MT7921AU-based USB 802.11ax interface with an Ethernet interface on an Intel Atom-based x86 system using its onboard RTL8169 PCI Ethernet adapter and also on an ARM-based Raspberry Pi 1 using its onboard SMSC9512 USB Ethernet adapter. Note that the panics do not occur in every system configuration, as they occur only if the receiving netdev leaves less headroom in its received skbs than the mt7921 needs for its SDIO headers. Here is an example stack trace of this panic on Raspberry Pi OS Lite 2023-02-21 running kernel 6.1.24+ [1]: skb_panic from skb_push+0x44/0x48 skb_push from mt7921_usb_sdio_tx_prepare_skb+0xd4/0x190 [mt7921_common] mt7921_usb_sdio_tx_prepare_skb [mt7921_common] from mt76u_tx_queue_skb+0x94/0x1d0 [mt76_usb] mt76u_tx_queue_skb [mt76_usb] from __mt76_tx_queue_skb+0x4c/0xc8 [mt76] __mt76_tx_queue_skb [mt76] from mt76_txq_schedule.part.0+0x13c/0x398 [mt76] mt76_txq_schedule.part.0 [mt76] from mt76_txq_schedule_all+0x24/0x30 [mt76] mt76_txq_schedule_all [mt76] from mt7921_tx_worker+0x58/0xf4 [mt7921_common] mt7921_tx_worker [mt7921_common] from __mt76_worker_fn+0x9c/0xec [mt76] __mt76_worker_fn [mt76] from kthread+0xbc/0xe0 kthread from ret_from_fork+0x14/0x34 After this fix, bridging the mt7921 interface works fine on both of my previously problematic systems. [1] https://github.com/raspberrypi/firmware/tree/5c276f55a4b21345cd4d6200a504ee991851ff7a

In the Linux kernel, the following vulnerability has been resolved: smc: Fix use-after-free in tcp_write_timer_handler(). With Eric's ref tracker, syzbot finally found a repro for use-after-free in tcp_write_timer_handler() by kernel TCP sockets. [0] If SMC creates a kernel socket in __smc_create(), the kernel socket is supposed to be freed in smc_clcsock_release() by calling sock_release() when we close() the parent SMC socket. However, at the end of smc_clcsock_release(), the kernel socket's sk_state might not be TCP_CLOSE. This means that we have not called inet_csk_destroy_sock() in __tcp_close() and have not stopped the TCP timers. The kernel socket's TCP timers can be fired later, so we need to hold a refcnt for net as we do for MPTCP subflows in mptcp_subflow_create_socket(). [0]: leaked reference. sk_alloc (./include/net/net_namespace.h:335 net/core/sock.c:2108) inet_create (net/ipv4/af_inet.c:319 net/ipv4/af_inet.c:244) __sock_create (net/socket.c:1546) smc_create (net/smc/af_smc.c:3269 net/smc/af_smc.c:3284) __sock_create (net/socket.c:1546) __sys_socket (net/socket.c:1634 net/socket.c:1618 net/socket.c:1661) __x64_sys_socket (net/socket.c:1672) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) ================================================================== BUG: KASAN: slab-use-after-free in tcp_write_timer_handler (net/ipv4/tcp_timer.c:378 net/ipv4/tcp_timer.c:624 net/ipv4/tcp_timer.c:594) Read of size 1 at addr ffff888052b65e0d by task syzrepro/18091 CPU: 0 PID: 18091 Comm: syzrepro Tainted: G W 6.3.0-rc4-01174-gb5d54eb5899a #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.amzn2022.0.1 04/01/2014 Call Trace: <IRQ> dump_stack_lvl (lib/dump_stack.c:107) print_report (mm/kasan/report.c:320 mm/kasan/report.c:430) kasan_report (mm/kasan/report.c:538) tcp_write_timer_handler (net/ipv4/tcp_timer.c:378 net/ipv4/tcp_timer.c:624 net/ipv4/tcp_timer.c:594) tcp_write_timer (./include/linux/spinlock.h:390 net/ipv4/tcp_timer.c:643) call_timer_fn (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/timer.h:127 kernel/time/timer.c:1701) __run_timers.part.0 (kernel/time/timer.c:1752 kernel/time/timer.c:2022) run_timer_softirq (kernel/time/timer.c:2037) __do_softirq (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/irq.h:142 kernel/softirq.c:572) __irq_exit_rcu (kernel/softirq.c:445 kernel/softirq.c:650) irq_exit_rcu (kernel/softirq.c:664) sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1107 (discriminator 14)) </IRQ>

In the Linux kernel, the following vulnerability has been resolved: net: rds: don't hold sock lock when cancelling work from rds_tcp_reset_callbacks() syzbot is reporting lockdep warning at rds_tcp_reset_callbacks() [1], for commit ac3615e7f3cffe2a ("RDS: TCP: Reduce code duplication in rds_tcp_reset_callbacks()") added cancel_delayed_work_sync() into a section protected by lock_sock() without realizing that rds_send_xmit() might call lock_sock(). We don't need to protect cancel_delayed_work_sync() using lock_sock(), for even if rds_{send,recv}_worker() re-queued this work while __flush_work() from cancel_delayed_work_sync() was waiting for this work to complete, retried rds_{send,recv}_worker() is no-op due to the absence of RDS_CONN_UP bit.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix use-after-free in ext4_orphan_cleanup I caught a issue as follows: ================================================================== BUG: KASAN: use-after-free in __list_add_valid+0x28/0x1a0 Read of size 8 at addr ffff88814b13f378 by task mount/710 CPU: 1 PID: 710 Comm: mount Not tainted 6.1.0-rc3-next #370 Call Trace: <TASK> dump_stack_lvl+0x73/0x9f print_report+0x25d/0x759 kasan_report+0xc0/0x120 __asan_load8+0x99/0x140 __list_add_valid+0x28/0x1a0 ext4_orphan_cleanup+0x564/0x9d0 [ext4] __ext4_fill_super+0x48e2/0x5300 [ext4] ext4_fill_super+0x19f/0x3a0 [ext4] get_tree_bdev+0x27b/0x450 ext4_get_tree+0x19/0x30 [ext4] vfs_get_tree+0x49/0x150 path_mount+0xaae/0x1350 do_mount+0xe2/0x110 __x64_sys_mount+0xf0/0x190 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK> [...] ================================================================== Above issue may happen as follows: ------------------------------------- ext4_fill_super ext4_orphan_cleanup --- loop1: assume last_orphan is 12 --- list_add(&EXT4_I(inode)->i_orphan, &EXT4_SB(sb)->s_orphan) ext4_truncate --> return 0 ext4_inode_attach_jinode --> return -ENOMEM iput(inode) --> free inode<12> --- loop2: last_orphan is still 12 --- list_add(&EXT4_I(inode)->i_orphan, &EXT4_SB(sb)->s_orphan); // use inode<12> and trigger UAF To solve this issue, we need to propagate the return value of ext4_inode_attach_jinode() appropriately.

In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix "kernel NULL pointer dereference" error When rxe_queue_init in the function rxe_qp_init_req fails, both qp->req.task.func and qp->req.task.arg are not initialized. Because of creation of qp fails, the function rxe_create_qp will call rxe_qp_do_cleanup to handle allocated resource. Before calling __rxe_do_task, both qp->req.task.func and qp->req.task.arg should be checked.

In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Fix QP destroy to wait for all references dropped. Delay QP destroy completion until all siw references to QP are dropped. The calling RDMA core will free QP structure after successful return from siw_qp_destroy() call, so siw must not hold any remaining reference to the QP upon return. A use-after-free was encountered in xfstest generic/460, while testing NFSoRDMA. Here, after a TCP connection drop by peer, the triggered siw_cm_work_handler got delayed until after QP destroy call, referencing a QP which has already freed.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix failed to find the peer with peer_id 0 when disconnected It has a fail log which is ath11k_dbg in ath11k_dp_rx_process_mon_status(), as below, it will not print when debug_mask is not set ATH11K_DBG_DATA. ath11k_dbg(ab, ATH11K_DBG_DATA, "failed to find the peer with peer_id %d\n", ppdu_info.peer_id); When run scan with station disconnected, the peer_id is 0 for case HAL_RX_MPDU_START in ath11k_hal_rx_parse_mon_status_tlv() which called from ath11k_dp_rx_process_mon_status(), and the peer_id of ppdu_info is reset to 0 in the while loop, so it does not match condition of the check "if (ppdu_info->peer_id == HAL_INVALID_PEERID" in the loop, and then the log "failed to find the peer with peer_id 0" print after the check in the loop, it is below call stack when debug_mask is set ATH11K_DBG_DATA. The reason is this commit 01d2f285e3e5 ("ath11k: decode HE status tlv") add "memset(ppdu_info, 0, sizeof(struct hal_rx_mon_ppdu_info))" in ath11k_dp_rx_process_mon_status(), but the commit does not initialize the peer_id to HAL_INVALID_PEERID, then lead the check mis-match. Callstack of the failed log: [12335.689072] RIP: 0010:ath11k_dp_rx_process_mon_status+0x9ea/0x1020 [ath11k] [12335.689157] Code: 89 ff e8 f9 10 00 00 be 01 00 00 00 4c 89 f7 e8 dc 4b 4e de 48 8b 85 38 ff ff ff c7 80 e4 07 00 00 01 00 00 00 e9 20 f8 ff ff <0f> 0b 41 0f b7 96 be 06 00 00 48 c7 c6 b8 50 44 c1 4c 89 ff e8 fd [12335.689180] RSP: 0018:ffffb874001a4ca0 EFLAGS: 00010246 [12335.689210] RAX: 0000000000000000 RBX: ffff995642cbd100 RCX: 0000000000000000 [12335.689229] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff99564212cd18 [12335.689248] RBP: ffffb874001a4dc0 R08: 0000000000000001 R09: 0000000000000000 [12335.689268] R10: 0000000000000220 R11: ffffb874001a48e8 R12: ffff995642473d40 [12335.689286] R13: ffff99564212c5b8 R14: ffff9956424736a0 R15: ffff995642120000 [12335.689303] FS: 0000000000000000(0000) GS:ffff995739000000(0000) knlGS:0000000000000000 [12335.689323] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [12335.689341] CR2: 00007f43c5d5e039 CR3: 000000011c012005 CR4: 00000000000606e0 [12335.689360] Call Trace: [12335.689377] <IRQ> [12335.689418] ? rcu_read_lock_held_common+0x12/0x50 [12335.689447] ? rcu_read_lock_sched_held+0x25/0x80 [12335.689471] ? rcu_read_lock_held_common+0x12/0x50 [12335.689504] ath11k_dp_rx_process_mon_rings+0x8d/0x4f0 [ath11k] [12335.689578] ? ath11k_dp_rx_process_mon_rings+0x8d/0x4f0 [ath11k] [12335.689653] ? lock_acquire+0xef/0x360 [12335.689681] ? rcu_read_lock_sched_held+0x25/0x80 [12335.689713] ath11k_dp_service_mon_ring+0x38/0x60 [ath11k] [12335.689784] ? ath11k_dp_rx_process_mon_rings+0x4f0/0x4f0 [ath11k] [12335.689860] call_timer_fn+0xb2/0x2f0 [12335.689897] ? ath11k_dp_rx_process_mon_rings+0x4f0/0x4f0 [ath11k] [12335.689970] run_timer_softirq+0x21f/0x540 [12335.689999] ? ktime_get+0xad/0x160 [12335.690025] ? lapic_next_deadline+0x2c/0x40 [12335.690053] ? clockevents_program_event+0x82/0x100 [12335.690093] __do_softirq+0x151/0x4a8 [12335.690135] irq_exit_rcu+0xc9/0x100 [12335.690165] sysvec_apic_timer_interrupt+0xa8/0xd0 [12335.690189] </IRQ> [12335.690204] <TASK> [12335.690225] asm_sysvec_apic_timer_interrupt+0x12/0x20 Reset the default value to HAL_INVALID_PEERID each time after memset of ppdu_info as well as others memset which existed in function ath11k_dp_rx_process_mon_status(), then the failed log disappeared. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3

In the Linux kernel, the following vulnerability has been resolved: nfc: pn533: Clear nfc_target before being used Fix a slab-out-of-bounds read that occurs in nla_put() called from nfc_genl_send_target() when target->sensb_res_len, which is duplicated from an nfc_target in pn533, is too large as the nfc_target is not properly initialized and retains garbage values. Clear nfc_targets with memset() before they are used. Found by a modified version of syzkaller. BUG: KASAN: slab-out-of-bounds in nla_put Call Trace: memcpy nla_put nfc_genl_dump_targets genl_lock_dumpit netlink_dump __netlink_dump_start genl_family_rcv_msg_dumpit genl_rcv_msg netlink_rcv_skb genl_rcv netlink_unicast netlink_sendmsg sock_sendmsg ____sys_sendmsg ___sys_sendmsg __sys_sendmsg do_syscall_64

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix reference state management for synchronous callbacks Currently, verifier verifies callback functions (sync and async) as if they will be executed once, (i.e. it explores execution state as if the function was being called once). The next insn to explore is set to start of subprog and the exit from nested frame is handled using curframe > 0 and prepare_func_exit. In case of async callback it uses a customized variant of push_stack simulating a kind of branch to set up custom state and execution context for the async callback. While this approach is simple and works when callback really will be executed only once, it is unsafe for all of our current helpers which are for_each style, i.e. they execute the callback multiple times. A callback releasing acquired references of the caller may do so multiple times, but currently verifier sees it as one call inside the frame, which then returns to caller. Hence, it thinks it released some reference that the cb e.g. got access through callback_ctx (register filled inside cb from spilled typed register on stack). Similarly, it may see that an acquire call is unpaired inside the callback, so the caller will copy the reference state of callback and then will have to release the register with new ref_obj_ids. But again, the callback may execute multiple times, but the verifier will only account for acquired references for a single symbolic execution of the callback, which will cause leaks. Note that for async callback case, things are different. While currently we have bpf_timer_set_callback which only executes it once, even for multiple executions it would be safe, as reference state is NULL and check_reference_leak would force program to release state before BPF_EXIT. The state is also unaffected by analysis for the caller frame. Hence async callback is safe. Since we want the reference state to be accessible, e.g. for pointers loaded from stack through callback_ctx's PTR_TO_STACK, we still have to copy caller's reference_state to callback's bpf_func_state, but we enforce that whatever references it adds to that reference_state has been released before it hits BPF_EXIT. This requires introducing a new callback_ref member in the reference state to distinguish between caller vs callee references. Hence, check_reference_leak now errors out if it sees we are in callback_fn and we have not released callback_ref refs. Since there can be multiple nested callbacks, like frame 0 -> cb1 -> cb2 etc. we need to also distinguish between whether this particular ref belongs to this callback frame or parent, and only error for our own, so we store state->frameno (which is always non-zero for callbacks). In short, callbacks can read parent reference_state, but cannot mutate it, to be able to use pointers acquired by the caller. They must only undo their changes (by releasing their own acquired_refs before BPF_EXIT) on top of caller reference_state before returning (at which point the caller and callback state will match anyway, so no need to copy it back to caller).

In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: avs: Disable periods-elapsed work when closing PCM avs_dai_fe_shutdown() handles the shutdown procedure for HOST HDAudio stream while period-elapsed work services its IRQs. As the former frees the DAI's private context, these two operations shall be synchronized to avoid slab-use-after-free or worse errors.

In the Linux kernel, the following vulnerability has been resolved: nvmet-fc: avoid scheduling association deletion twice When forcefully shutting down a port via the configfs interface, nvmet_port_subsys_drop_link() first calls nvmet_port_del_ctrls() and then nvmet_disable_port(). Both functions will eventually schedule all remaining associations for deletion. The current implementation checks whether an association is about to be removed, but only after the work item has already been scheduled. As a result, it is possible for the first scheduled work item to free all resources, and then for the same work item to be scheduled again for deletion. Because the association list is an RCU list, it is not possible to take a lock and remove the list entry directly, so it cannot be looked up again. Instead, a flag (terminating) must be used to determine whether the association is already in the process of being deleted.

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix oops in xe_gem_fault when running core_hotunplug test. I saw an oops in xe_gem_fault when running the xe-fast-feedback testlist against the realtime kernel without debug options enabled. The panic happens after core_hotunplug unbind-rebind finishes. Presumably what happens is that a process mmaps, unlocks because of the FAULT_FLAG_RETRY_NOWAIT logic, has no process memory left, causing ttm_bo_vm_dummy_page() to return VM_FAULT_NOPAGE, since there was nothing left to populate, and then oopses in "mem_type_is_vram(tbo->resource->mem_type)" because tbo->resource is NULL. It's convoluted, but fits the data and explains the oops after the test exits.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix nullptr err of vm_handle_moved If a amdgpu_bo_va is fpriv->prt_va, the bo of this one is always NULL. So, such kind of amdgpu_bo_va should be updated separately before amdgpu_vm_handle_moved.

In the Linux kernel, the following vulnerability has been resolved: drm/gpusvm: fix hmm_pfn_to_map_order() usage Handle the case where the hmm range partially covers a huge page (like 2M), otherwise we can potentially end up doing something nasty like mapping memory which is outside the range, and maybe not even mapped by the mm. Fix is based on the xe userptr code, which in a future patch will directly use gpusvm, so needs alignment here. v2: - Add kernel-doc (Matt B) - s/fls/ilog2/ (Thomas)

In the Linux kernel, the following vulnerability has been resolved: drm/sched: Fix deadlock in drm_sched_entity_kill_jobs_cb The Mesa issue referenced below pointed out a possible deadlock: [ 1231.611031] Possible interrupt unsafe locking scenario: [ 1231.611033] CPU0 CPU1 [ 1231.611034] ---- ---- [ 1231.611035] lock(&xa->xa_lock#17); [ 1231.611038] local_irq_disable(); [ 1231.611039] lock(&fence->lock); [ 1231.611041] lock(&xa->xa_lock#17); [ 1231.611044] <Interrupt> [ 1231.611045] lock(&fence->lock); [ 1231.611047] *** DEADLOCK *** In this example, CPU0 would be any function accessing job->dependencies through the xa_* functions that don't disable interrupts (eg: drm_sched_job_add_dependency(), drm_sched_entity_kill_jobs_cb()). CPU1 is executing drm_sched_entity_kill_jobs_cb() as a fence signalling callback so in an interrupt context. It will deadlock when trying to grab the xa_lock which is already held by CPU0. Replacing all xa_* usage by their xa_*_irq counterparts would fix this issue, but Christian pointed out another issue: dma_fence_signal takes fence.lock and so does dma_fence_add_callback. dma_fence_signal() // locks f1.lock -> drm_sched_entity_kill_jobs_cb() -> foreach dependencies -> dma_fence_add_callback() // locks f2.lock This will deadlock if f1 and f2 share the same spinlock. To fix both issues, the code iterating on dependencies and re-arming them is moved out to drm_sched_entity_kill_jobs_work(). [phasta: commit message nits]

In the Linux kernel, the following vulnerability has been resolved: perf/core: Fix system hang caused by cpu-clock usage cpu-clock usage by the async-profiler tool can trigger a system hang, which got bisected back to the following commit by Octavia Togami: 18dbcbfabfff ("perf: Fix the POLL_HUP delivery breakage") causes this issue The root cause of the hang is that cpu-clock is a special type of SW event which relies on hrtimers. The __perf_event_overflow() callback is invoked from the hrtimer handler for cpu-clock events, and __perf_event_overflow() tries to call cpu_clock_event_stop() to stop the event, which calls htimer_cancel() to cancel the hrtimer. But that's a recursion into the hrtimer code from a hrtimer handler, which (unsurprisingly) deadlocks. To fix this bug, use hrtimer_try_to_cancel() instead, and set the PERF_HES_STOPPED flag, which causes perf_swevent_hrtimer() to stop the event once it sees the PERF_HES_STOPPED flag. [ mingo: Fixed the comments and improved the changelog. ]

In the Linux kernel, the following vulnerability has been resolved: netlink: annotate accesses to nlk->cb_running Both netlink_recvmsg() and netlink_native_seq_show() read nlk->cb_running locklessly. Use READ_ONCE() there. Add corresponding WRITE_ONCE() to netlink_dump() and __netlink_dump_start() syzbot reported: BUG: KCSAN: data-race in __netlink_dump_start / netlink_recvmsg write to 0xffff88813ea4db59 of 1 bytes by task 28219 on cpu 0: __netlink_dump_start+0x3af/0x4d0 net/netlink/af_netlink.c:2399 netlink_dump_start include/linux/netlink.h:308 [inline] rtnetlink_rcv_msg+0x70f/0x8c0 net/core/rtnetlink.c:6130 netlink_rcv_skb+0x126/0x220 net/netlink/af_netlink.c:2577 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:6192 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0x56f/0x640 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x665/0x770 net/netlink/af_netlink.c:1942 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] sock_write_iter+0x1aa/0x230 net/socket.c:1138 call_write_iter include/linux/fs.h:1851 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x463/0x760 fs/read_write.c:584 ksys_write+0xeb/0x1a0 fs/read_write.c:637 __do_sys_write fs/read_write.c:649 [inline] __se_sys_write fs/read_write.c:646 [inline] __x64_sys_write+0x42/0x50 fs/read_write.c:646 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd read to 0xffff88813ea4db59 of 1 bytes by task 28222 on cpu 1: netlink_recvmsg+0x3b4/0x730 net/netlink/af_netlink.c:2022 sock_recvmsg_nosec+0x4c/0x80 net/socket.c:1017 ____sys_recvmsg+0x2db/0x310 net/socket.c:2718 ___sys_recvmsg net/socket.c:2762 [inline] do_recvmmsg+0x2e5/0x710 net/socket.c:2856 __sys_recvmmsg net/socket.c:2935 [inline] __do_sys_recvmmsg net/socket.c:2958 [inline] __se_sys_recvmmsg net/socket.c:2951 [inline] __x64_sys_recvmmsg+0xe2/0x160 net/socket.c:2951 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x00 -> 0x01

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix infinite loop in nilfs_mdt_get_block() If the disk image that nilfs2 mounts is corrupted and a virtual block address obtained by block lookup for a metadata file is invalid, nilfs_bmap_lookup_at_level() may return the same internal return code as -ENOENT, meaning the block does not exist in the metadata file. This duplication of return codes confuses nilfs_mdt_get_block(), causing it to read and create a metadata block indefinitely. In particular, if this happens to the inode metadata file, ifile, semaphore i_rwsem can be left held, causing task hangs in lock_mount. Fix this issue by making nilfs_bmap_lookup_at_level() treat virtual block address translation failures with -ENOENT as metadata corruption instead of returning the error code.

In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: reject negative ifindex Recent changes in net-next (commit 759ab1edb56c ("net: store netdevs in an xarray")) refactored the handling of pre-assigned ifindexes and let syzbot surface a latent problem in ovs. ovs does not validate ifindex, making it possible to create netdev ports with negative ifindex values. It's easy to repro with YNL: $ ./cli.py --spec netlink/specs/ovs_datapath.yaml \ --do new \ --json '{"upcall-pid": 1, "name":"my-dp"}' $ ./cli.py --spec netlink/specs/ovs_vport.yaml \ --do new \ --json '{"upcall-pid": "00000001", "name": "some-port0", "dp-ifindex":3,"ifindex":4294901760,"type":2}' $ ip link show -65536: some-port0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 7a:48:21:ad:0b:fb brd ff:ff:ff:ff:ff:ff ... Validate the inputs. Now the second command correctly returns: $ ./cli.py --spec netlink/specs/ovs_vport.yaml \ --do new \ --json '{"upcall-pid": "00000001", "name": "some-port0", "dp-ifindex":3,"ifindex":4294901760,"type":2}' lib.ynl.NlError: Netlink error: Numerical result out of range nl_len = 108 (92) nl_flags = 0x300 nl_type = 2 error: -34 extack: {'msg': 'integer out of range', 'unknown': [[type:4 len:36] b'\x0c\x00\x02\x00\x00\x00\x00\x00\x00\x00\x00\x00\x0c\x00\x03\x00\xff\xff\xff\x7f\x00\x00\x00\x00\x08\x00\x01\x00\x08\x00\x00\x00'], 'bad-attr': '.ifindex'} Accept 0 since it used to be silently ignored.

In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: wcd-mbhc-v2: fix resource leaks on component remove The MBHC resources must be released on component probe failure and removal so can not be tied to the lifetime of the component device. This is specifically needed to allow probe deferrals of the sound card which otherwise fails when reprobing the codec component: snd-sc8280xp sound: ASoC: failed to instantiate card -517 genirq: Flags mismatch irq 299. 00002001 (mbhc sw intr) vs. 00002001 (mbhc sw intr) wcd938x_codec audio-codec: Failed to request mbhc interrupts -16 wcd938x_codec audio-codec: mbhc initialization failed wcd938x_codec audio-codec: ASoC: error at snd_soc_component_probe on audio-codec: -16 snd-sc8280xp sound: ASoC: failed to instantiate card -16

In the Linux kernel, the following vulnerability has been resolved: devlink: report devlink_port_type_warn source device devlink_port_type_warn is scheduled for port devlink and warning when the port type is not set. But from this warning it is not easy found out which device (driver) has no devlink port set. [ 3709.975552] Type was not set for devlink port. [ 3709.975579] WARNING: CPU: 1 PID: 13092 at net/devlink/leftover.c:6775 devlink_port_type_warn+0x11/0x20 [ 3709.993967] Modules linked in: openvswitch nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nfnetlink bluetooth rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs vhost_net vhost vhost_iotlb tap tun bridge stp llc qrtr intel_rapl_msr intel_rapl_common i10nm_edac nfit libnvdimm x86_pkg_temp_thermal mlx5_ib intel_powerclamp coretemp dell_wmi ledtrig_audio sparse_keymap ipmi_ssif kvm_intel ib_uverbs rfkill ib_core video kvm iTCO_wdt acpi_ipmi intel_vsec irqbypass ipmi_si iTCO_vendor_support dcdbas ipmi_devintf mei_me ipmi_msghandler rapl mei intel_cstate isst_if_mmio isst_if_mbox_pci dell_smbios intel_uncore isst_if_common i2c_i801 dell_wmi_descriptor wmi_bmof i2c_smbus intel_pch_thermal pcspkr acpi_power_meter xfs libcrc32c sd_mod sg nvme_tcp mgag200 i2c_algo_bit nvme_fabrics drm_shmem_helper drm_kms_helper nvme syscopyarea ahci sysfillrect sysimgblt nvme_core fb_sys_fops crct10dif_pclmul libahci mlx5_core sfc crc32_pclmul nvme_common drm [ 3709.994030] crc32c_intel mtd t10_pi mlxfw libata tg3 mdio megaraid_sas psample ghash_clmulni_intel pci_hyperv_intf wmi dm_multipath sunrpc dm_mirror dm_region_hash dm_log dm_mod be2iscsi bnx2i cnic uio cxgb4i cxgb4 tls libcxgbi libcxgb qla4xxx iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi fuse [ 3710.108431] CPU: 1 PID: 13092 Comm: kworker/1:1 Kdump: loaded Not tainted 5.14.0-319.el9.x86_64 #1 [ 3710.108435] Hardware name: Dell Inc. PowerEdge R750/0PJ80M, BIOS 1.8.2 09/14/2022 [ 3710.108437] Workqueue: events devlink_port_type_warn [ 3710.108440] RIP: 0010:devlink_port_type_warn+0x11/0x20 [ 3710.108443] Code: 84 76 fe ff ff 48 c7 03 20 0e 1a ad 31 c0 e9 96 fd ff ff 66 0f 1f 44 00 00 0f 1f 44 00 00 48 c7 c7 18 24 4e ad e8 ef 71 62 ff <0f> 0b c3 cc cc cc cc 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 f6 87 [ 3710.108445] RSP: 0018:ff3b6d2e8b3c7e90 EFLAGS: 00010282 [ 3710.108447] RAX: 0000000000000000 RBX: ff366d6580127080 RCX: 0000000000000027 [ 3710.108448] RDX: 0000000000000027 RSI: 00000000ffff86de RDI: ff366d753f41f8c8 [ 3710.108449] RBP: ff366d658ff5a0c0 R08: ff366d753f41f8c0 R09: ff3b6d2e8b3c7e18 [ 3710.108450] R10: 0000000000000001 R11: 0000000000000023 R12: ff366d753f430600 [ 3710.108451] R13: ff366d753f436900 R14: 0000000000000000 R15: ff366d753f436905 [ 3710.108452] FS: 0000000000000000(0000) GS:ff366d753f400000(0000) knlGS:0000000000000000 [ 3710.108453] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3710.108454] CR2: 00007f1c57bc74e0 CR3: 000000111d26a001 CR4: 0000000000773ee0 [ 3710.108456] PKRU: 55555554 [ 3710.108457] Call Trace: [ 3710.108458] <TASK> [ 3710.108459] process_one_work+0x1e2/0x3b0 [ 3710.108466] ? rescuer_thread+0x390/0x390 [ 3710.108468] worker_thread+0x50/0x3a0 [ 3710.108471] ? rescuer_thread+0x390/0x390 [ 3710.108473] kthread+0xdd/0x100 [ 3710.108477] ? kthread_complete_and_exit+0x20/0x20 [ 3710.108479] ret_from_fork+0x1f/0x30 [ 3710.108485] </TASK> [ 3710.108486] ---[ end trace 1b4b23cd0c65d6a0 ]--- After patch: [ 402.473064] ice 0000:41:00.0: Type was not set for devlink port. [ 402.473064] ice 0000:41:00.1: Type was not set for devlink port.

In the Linux kernel, the following vulnerability has been resolved: usb: early: xhci-dbc: Fix a potential out-of-bound memory access If xdbc_bulk_write() fails, the values in 'buf' can be anything. So the string is not guaranteed to be NULL terminated when xdbc_trace() is called. Reserve an extra byte, which will be zeroed automatically because 'buf' is a static variable, in order to avoid troubles, should it happen.

In the Linux kernel, the following vulnerability has been resolved: iio: adc: ina2xx: avoid NULL pointer dereference on OF device match The affected lines were resulting in a NULL pointer dereference on our platform because the device tree contained the following list of compatible strings: power-sensor@40 { compatible = "ti,ina232", "ti,ina231"; ... }; Since the driver doesn't declare a compatible string "ti,ina232", the OF matching succeeds on "ti,ina231". But the I2C device ID info is populated via the first compatible string, cf. modalias population in of_i2c_get_board_info(). Since there is no "ina232" entry in the legacy I2C device ID table either, the struct i2c_device_id *id pointer in the probe function is NULL. Fix this by using the already populated type variable instead, which points to the proper driver data. Since the name is also wanted, add a generic one to the ina2xx_config table.

In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix null-ptr-deref in raid10_sync_request init_resync() inits mempool and sets conf->have_replacemnt at the beginning of sync, close_sync() frees the mempool when sync is completed. After [1] recovery might be skipped and init_resync() is called but close_sync() is not. null-ptr-deref occurs with r10bio->dev[i].repl_bio. The following is one way to reproduce the issue. 1) create a array, wait for resync to complete, mddev->recovery_cp is set to MaxSector. 2) recovery is woken and it is skipped. conf->have_replacement is set to 0 in init_resync(). close_sync() not called. 3) some io errors and rdev A is set to WantReplacement. 4) a new device is added and set to A's replacement. 5) recovery is woken, A have replacement, but conf->have_replacemnt is 0. r10bio->dev[i].repl_bio will not be alloced and null-ptr-deref occurs. Fix it by not calling init_resync() if recovery skipped. [1] commit 7e83ccbecd60 ("md/raid10: Allow skipping recovery when clean arrays are assembled")

In the Linux kernel, the following vulnerability has been resolved: block/rq_qos: protect rq_qos apis with a new lock commit 50e34d78815e ("block: disable the elevator int del_gendisk") move rq_qos_exit() from disk_release() to del_gendisk(), this will introduce some problems: 1) If rq_qos_add() is triggered by enabling iocost/iolatency through cgroupfs, then it can concurrent with del_gendisk(), it's not safe to write 'q->rq_qos' concurrently. 2) Activate cgroup policy that is relied on rq_qos will call rq_qos_add() and blkcg_activate_policy(), and if rq_qos_exit() is called in the middle, null-ptr-dereference will be triggered in blkcg_activate_policy(). 3) blkg_conf_open_bdev() can call blkdev_get_no_open() first to find the disk, then if rq_qos_exit() from del_gendisk() is done before rq_qos_add(), then memory will be leaked. This patch add a new disk level mutex 'rq_qos_mutex': 1) The lock will protect rq_qos_exit() directly. 2) For wbt that doesn't relied on blk-cgroup, rq_qos_add() can only be called from disk initialization for now because wbt can't be destructed until rq_qos_exit(), so it's safe not to protect wbt for now. Hoever, in case that rq_qos dynamically destruction is supported in the furture, this patch also protect rq_qos_add() from wbt_init() directly, this is enough because blk-sysfs already synchronize writers with disk removal. 3) For iocost and iolatency, in order to synchronize disk removal and cgroup configuration, the lock is held after blkdev_get_no_open() from blkg_conf_open_bdev(), and is released in blkg_conf_exit(). In order to fix the above memory leak, disk_live() is checked after holding the new lock.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: Ignore frags from uninitialized peer in dp. When max virtual ap interfaces are configured in all the bands with ACS and hostapd restart is done every 60s, a crash is observed at random times. In this certain scenario, a fragmented packet is received for self peer, for which rx_tid and rx_frags are not initialized in datapath. While handling this fragment, crash is observed as the rx_frag list is uninitialised and when we walk in ath11k_dp_rx_h_sort_frags, skb null leads to exception. To address this, before processing received fragments we check dp_setup_done flag is set to ensure that peer has completed its dp peer setup for fragment queue, else ignore processing the fragments. Call trace: ath11k_dp_process_rx_err+0x550/0x1084 [ath11k] ath11k_dp_service_srng+0x70/0x370 [ath11k] 0xffffffc009693a04 __napi_poll+0x30/0xa4 net_rx_action+0x118/0x270 __do_softirq+0x10c/0x244 irq_exit+0x64/0xb4 __handle_domain_irq+0x88/0xac gic_handle_irq+0x74/0xbc el1_irq+0xf0/0x1c0 arch_cpu_idle+0x10/0x18 do_idle+0x104/0x248 cpu_startup_entry+0x20/0x64 rest_init+0xd0/0xdc arch_call_rest_init+0xc/0x14 start_kernel+0x480/0x4b8 Code: f9400281 f94066a2 91405021 b94a0023 (f9406401) Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

In the Linux kernel, the following vulnerability has been resolved: kcm: Fix error handling for SOCK_DGRAM in kcm_sendmsg(). syzkaller found a memory leak in kcm_sendmsg(), and commit c821a88bd720 ("kcm: Fix memory leak in error path of kcm_sendmsg()") suppressed it by updating kcm_tx_msg(head)->last_skb if partial data is copied so that the following sendmsg() will resume from the skb. However, we cannot know how many bytes were copied when we get the error. Thus, we could mess up the MSG_MORE queue. When kcm_sendmsg() fails for SOCK_DGRAM, we should purge the queue as we do so for UDP by udp_flush_pending_frames(). Even without this change, when the error occurred, the following sendmsg() resumed from a wrong skb and the queue was messed up. However, we have yet to get such a report, and only syzkaller stumbled on it. So, this can be changed safely. Note this does not change SOCK_SEQPACKET behaviour.

In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: fix decoder disable pm crash Can't call pm_runtime_disable when the architecture support sub device for 'dev->pm.dev' is NUll, or will get below crash log. [ 10.771551] pc : _raw_spin_lock_irq+0x4c/0xa0 [ 10.771556] lr : __pm_runtime_disable+0x30/0x130 [ 10.771558] sp : ffffffc01e4cb800 [ 10.771559] x29: ffffffc01e4cb800 x28: ffffffdf082108a8 [ 10.771563] x27: ffffffc01e4cbd70 x26: ffffff8605df55f0 [ 10.771567] x25: 0000000000000002 x24: 0000000000000002 [ 10.771570] x23: ffffff85c0dc9c00 x22: 0000000000000001 [ 10.771573] x21: 0000000000000001 x20: 0000000000000000 [ 10.771577] x19: 00000000000000f4 x18: ffffffdf2e9fbe18 [ 10.771580] x17: 0000000000000000 x16: ffffffdf2df13c74 [ 10.771583] x15: 00000000000002ea x14: 0000000000000058 [ 10.771587] x13: ffffffdf2de1b62c x12: ffffffdf2e9e30e4 [ 10.771590] x11: 0000000000000000 x10: 0000000000000001 [ 10.771593] x9 : 0000000000000000 x8 : 00000000000000f4 [ 10.771596] x7 : 6bff6264632c6264 x6 : 0000000000008000 [ 10.771600] x5 : 0080000000000000 x4 : 0000000000000001 [ 10.771603] x3 : 0000000000000008 x2 : 0000000000000001 [ 10.771608] x1 : 0000000000000000 x0 : 00000000000000f4 [ 10.771613] Call trace: [ 10.771617] _raw_spin_lock_irq+0x4c/0xa0 [ 10.771620] __pm_runtime_disable+0x30/0x130 [ 10.771657] mtk_vcodec_probe+0x69c/0x728 [mtk_vcodec_dec 800cc929d6631f79f9b273254c8db94d0d3500dc] [ 10.771662] platform_drv_probe+0x9c/0xbc [ 10.771665] really_probe+0x13c/0x3a0 [ 10.771668] driver_probe_device+0x84/0xc0 [ 10.771671] device_driver_attach+0x54/0x78

In the Linux kernel, the following vulnerability has been resolved: md: fix warning for holder mismatch from export_rdev() Commit a1d767191096 ("md: use mddev->external to select holder in export_rdev()") fix the problem that 'claim_rdev' is used for blkdev_get_by_dev() while 'rdev' is used for blkdev_put(). However, if mddev->external is changed from 0 to 1, then 'rdev' is used for blkdev_get_by_dev() while 'claim_rdev' is used for blkdev_put(). And this problem can be reporduced reliably by following: New file: mdadm/tests/23rdev-lifetime devname=${dev0##*/} devt=`cat /sys/block/$devname/dev` pid="" runtime=2 clean_up_test() { pill -9 $pid echo clear > /sys/block/md0/md/array_state } trap 'clean_up_test' EXIT add_by_sysfs() { while true; do echo $devt > /sys/block/md0/md/new_dev done } remove_by_sysfs(){ while true; do echo remove > /sys/block/md0/md/dev-${devname}/state done } echo md0 > /sys/module/md_mod/parameters/new_array || die "create md0 failed" add_by_sysfs & pid="$pid $!" remove_by_sysfs & pid="$pid $!" sleep $runtime exit 0 Test cmd: ./test --save-logs --logdir=/tmp/ --keep-going --dev=loop --tests=23rdev-lifetime Test result: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 960 at block/bdev.c:618 blkdev_put+0x27c/0x330 Modules linked in: multipath md_mod loop CPU: 0 PID: 960 Comm: test Not tainted 6.5.0-rc2-00121-g01e55c376936-dirty #50 RIP: 0010:blkdev_put+0x27c/0x330 Call Trace: <TASK> export_rdev.isra.23+0x50/0xa0 [md_mod] mddev_unlock+0x19d/0x300 [md_mod] rdev_attr_store+0xec/0x190 [md_mod] sysfs_kf_write+0x52/0x70 kernfs_fop_write_iter+0x19a/0x2a0 vfs_write+0x3b5/0x770 ksys_write+0x74/0x150 __x64_sys_write+0x22/0x30 do_syscall_64+0x40/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fix the problem by recording if 'rdev' is used as holder.

In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Improve page fault error reporting If IOMMU domain for device group is not setup properly then we may hit IOMMU page fault. Current page fault handler assumes that domain is always setup and it will hit NULL pointer derefence (see below sample log). Lets check whether domain is setup or not and log appropriate message. Sample log: ---------- amdgpu 0000:00:01.0: amdgpu: SE 1, SH per SE 1, CU per SH 8, active_cu_number 6 BUG: kernel NULL pointer dereference, address: 0000000000000058 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 2 PID: 56 Comm: irq/24-AMD-Vi Not tainted 6.2.0-rc2+ #89 Hardware name: xxx RIP: 0010:report_iommu_fault+0x11/0x90 [...] Call Trace: <TASK> amd_iommu_int_thread+0x60c/0x760 ? __pfx_irq_thread_fn+0x10/0x10 irq_thread_fn+0x1f/0x60 irq_thread+0xea/0x1a0 ? preempt_count_add+0x6a/0xa0 ? __pfx_irq_thread_dtor+0x10/0x10 ? __pfx_irq_thread+0x10/0x10 kthread+0xe9/0x110 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> [joro: Edit commit message]

In the Linux kernel, the following vulnerability has been resolved: ALSA: hda/ca0132: fixup buffer overrun at tuning_ctl_set() tuning_ctl_set() might have buffer overrun at (X) if it didn't break from loop by matching (A). static int tuning_ctl_set(...) { for (i = 0; i < TUNING_CTLS_COUNT; i++) (A) if (nid == ca0132_tuning_ctls[i].nid) break; snd_hda_power_up(...); (X) dspio_set_param(..., ca0132_tuning_ctls[i].mid, ...); snd_hda_power_down(...); ^ return 1; } We will get below error by cppcheck sound/pci/hda/patch_ca0132.c:4229:2: note: After for loop, i has value 12 for (i = 0; i < TUNING_CTLS_COUNT; i++) ^ sound/pci/hda/patch_ca0132.c:4234:43: note: Array index out of bounds dspio_set_param(codec, ca0132_tuning_ctls[i].mid, 0x20, ^ This patch cares non match case.

In the Linux kernel, the following vulnerability has been resolved: regulator: da9063: fix null pointer deref with partial DT config When some of the da9063 regulators do not have corresponding DT nodes a null pointer dereference occurs on boot because such regulators have no init_data causing the pointers calculated in da9063_check_xvp_constraints() to be invalid. Do not dereference them in this case.

In the Linux kernel, the following vulnerability has been resolved: drm: bridge: dw_hdmi: fix connector access for scdc Commit 5d844091f237 ("drm/scdc-helper: Pimp SCDC debugs") changed the scdc interface to pick up an i2c adapter from a connector instead. However, in the case of dw-hdmi, the wrong connector was being used to pass i2c adapter information, since dw-hdmi's embedded connector structure is only populated when the bridge attachment callback explicitly asks for it. drm-meson is handling connector creation, so this won't happen, leading to a NULL pointer dereference. Fix it by having scdc functions access dw-hdmi's current connector pointer instead, which is assigned during the bridge enablement stage. [narmstrong: moved Fixes tag before first S-o-b and added Reported-by tag]

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: fix FCLK pstate change underflow [Why] Currently we set FCLK p-state change watermark calculated based on dummy p-state latency when UCLK p-state is not supported [How] Calculate FCLK p-state change watermark based on on FCLK pstate change latency in case UCLK p-state is not supported

In the Linux kernel, the following vulnerability has been resolved: ext4: fix deadlock due to mbcache entry corruption When manipulating xattr blocks, we can deadlock infinitely looping inside ext4_xattr_block_set() where we constantly keep finding xattr block for reuse in mbcache but we are unable to reuse it because its reference count is too big. This happens because cache entry for the xattr block is marked as reusable (e_reusable set) although its reference count is too big. When this inconsistency happens, this inconsistent state is kept indefinitely and so ext4_xattr_block_set() keeps retrying indefinitely. The inconsistent state is caused by non-atomic update of e_reusable bit. e_reusable is part of a bitfield and e_reusable update can race with update of e_referenced bit in the same bitfield resulting in loss of one of the updates. Fix the problem by using atomic bitops instead. This bug has been around for many years, but it became *much* easier to hit after commit 65f8b80053a1 ("ext4: fix race when reusing xattr blocks").

In the Linux kernel, the following vulnerability has been resolved: i40e: Fix DMA mappings leak During reallocation of RX buffers, new DMA mappings are created for those buffers. steps for reproduction: while : do for ((i=0; i<=8160; i=i+32)) do ethtool -G enp130s0f0 rx $i tx $i sleep 0.5 ethtool -g enp130s0f0 done done This resulted in crash: i40e 0000:01:00.1: Unable to allocate memory for the Rx descriptor ring, size=65536 Driver BUG WARNING: CPU: 0 PID: 4300 at net/core/xdp.c:141 xdp_rxq_info_unreg+0x43/0x50 Call Trace: i40e_free_rx_resources+0x70/0x80 [i40e] i40e_set_ringparam+0x27c/0x800 [i40e] ethnl_set_rings+0x1b2/0x290 genl_family_rcv_msg_doit.isra.15+0x10f/0x150 genl_family_rcv_msg+0xb3/0x160 ? rings_fill_reply+0x1a0/0x1a0 genl_rcv_msg+0x47/0x90 ? genl_family_rcv_msg+0x160/0x160 netlink_rcv_skb+0x4c/0x120 genl_rcv+0x24/0x40 netlink_unicast+0x196/0x230 netlink_sendmsg+0x204/0x3d0 sock_sendmsg+0x4c/0x50 __sys_sendto+0xee/0x160 ? handle_mm_fault+0xbe/0x1e0 ? syscall_trace_enter+0x1d3/0x2c0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca RIP: 0033:0x7f5eac8b035b Missing register, driver bug WARNING: CPU: 0 PID: 4300 at net/core/xdp.c:119 xdp_rxq_info_unreg_mem_model+0x69/0x140 Call Trace: xdp_rxq_info_unreg+0x1e/0x50 i40e_free_rx_resources+0x70/0x80 [i40e] i40e_set_ringparam+0x27c/0x800 [i40e] ethnl_set_rings+0x1b2/0x290 genl_family_rcv_msg_doit.isra.15+0x10f/0x150 genl_family_rcv_msg+0xb3/0x160 ? rings_fill_reply+0x1a0/0x1a0 genl_rcv_msg+0x47/0x90 ? genl_family_rcv_msg+0x160/0x160 netlink_rcv_skb+0x4c/0x120 genl_rcv+0x24/0x40 netlink_unicast+0x196/0x230 netlink_sendmsg+0x204/0x3d0 sock_sendmsg+0x4c/0x50 __sys_sendto+0xee/0x160 ? handle_mm_fault+0xbe/0x1e0 ? syscall_trace_enter+0x1d3/0x2c0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x5b/0x1a0 entry_SYSCALL_64_after_hwframe+0x65/0xca RIP: 0033:0x7f5eac8b035b This was caused because of new buffers with different RX ring count should substitute older ones, but those buffers were freed in i40e_configure_rx_ring and reallocated again with i40e_alloc_rx_bi, thus kfree on rx_bi caused leak of already mapped DMA. Fix this by reallocating ZC with rx_bi_zc struct when BPF program loads. Additionally reallocate back to rx_bi when BPF program unloads. If BPF program is loaded/unloaded and XSK pools are created, reallocate RX queues accordingly in XSP_SETUP_XSK_POOL handler.

In the Linux kernel, the following vulnerability has been resolved: misc: ocxl: fix possible name leak in ocxl_file_register_afu() If device_register() returns error in ocxl_file_register_afu(), the name allocated by dev_set_name() need be freed. As comment of device_register() says, it should use put_device() to give up the reference in the error path. So fix this by calling put_device(), then the name can be freed in kobject_cleanup(), and info is freed in info_release().

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Fix memory leak in vmw_mksstat_add_ioctl() If the copy of the description string from userspace fails, then the page for the instance descriptor doesn't get freed before returning -EFAULT, which leads to a memleak.

In the Linux kernel, the following vulnerability has been resolved: wifi: ipw2200: fix memory leak in ipw_wdev_init() In the error path of ipw_wdev_init(), exception value is returned, and the memory applied for in the function is not released. Also the memory is not released in ipw_pci_probe(). As a result, memory leakage occurs. So memory release needs to be added to the error path of ipw_wdev_init().

In the Linux kernel, the following vulnerability has been resolved: cpufreq: qcom: fix memory leak in error path If for some reason the speedbin length is incorrect, then there is a memory leak in the error path because we never free the speedbin buffer. This commit fixes the error path to always free the speedbin buffer.

In the Linux kernel, the following vulnerability has been resolved: ppp: associate skb with a device at tx Syzkaller triggered flow dissector warning with the following: r0 = openat$ppp(0xffffffffffffff9c, &(0x7f0000000000), 0xc0802, 0x0) ioctl$PPPIOCNEWUNIT(r0, 0xc004743e, &(0x7f00000000c0)) ioctl$PPPIOCSACTIVE(r0, 0x40107446, &(0x7f0000000240)={0x2, &(0x7f0000000180)=[{0x20, 0x0, 0x0, 0xfffff034}, {0x6}]}) pwritev(r0, &(0x7f0000000040)=[{&(0x7f0000000140)='\x00!', 0x2}], 0x1, 0x0, 0x0) [ 9.485814] WARNING: CPU: 3 PID: 329 at net/core/flow_dissector.c:1016 __skb_flow_dissect+0x1ee0/0x1fa0 [ 9.485929] skb_get_poff+0x53/0xa0 [ 9.485937] bpf_skb_get_pay_offset+0xe/0x20 [ 9.485944] ? ppp_send_frame+0xc2/0x5b0 [ 9.485949] ? _raw_spin_unlock_irqrestore+0x40/0x60 [ 9.485958] ? __ppp_xmit_process+0x7a/0xe0 [ 9.485968] ? ppp_xmit_process+0x5b/0xb0 [ 9.485974] ? ppp_write+0x12a/0x190 [ 9.485981] ? do_iter_write+0x18e/0x2d0 [ 9.485987] ? __import_iovec+0x30/0x130 [ 9.485997] ? do_pwritev+0x1b6/0x240 [ 9.486016] ? trace_hardirqs_on+0x47/0x50 [ 9.486023] ? __x64_sys_pwritev+0x24/0x30 [ 9.486026] ? do_syscall_64+0x3d/0x80 [ 9.486031] ? entry_SYSCALL_64_after_hwframe+0x63/0xcd Flow dissector tries to find skb net namespace either via device or via socket. Neigher is set in ppp_send_frame, so let's manually use ppp->dev.

In the Linux kernel, the following vulnerability has been resolved: power: supply: adp5061: fix out-of-bounds read in adp5061_get_chg_type() ADP5061_CHG_STATUS_1_CHG_STATUS is masked with 0x07, which means a length of 8, but adp5061_chg_type array size is 4, may end up reading 4 elements beyond the end of the adp5061_chg_type[] array.

In the Linux kernel, the following vulnerability has been resolved: EDAC/i10nm: fix refcount leak in pci_get_dev_wrapper() As the comment of pci_get_domain_bus_and_slot() says, it returns a PCI device with refcount incremented, so it doesn't need to call an extra pci_dev_get() in pci_get_dev_wrapper(), and the PCI device needs to be put in the error path.

In the Linux kernel, the following vulnerability has been resolved: cifs: Fix xid leak in cifs_copy_file_range() If the file is used by swap, before return -EOPNOTSUPP, should free the xid, otherwise, the xid will be leaked.

In the Linux kernel, the following vulnerability has been resolved: HSI: omap_ssi: Fix refcount leak in ssi_probe When returning or breaking early from a for_each_available_child_of_node() loop, we need to explicitly call of_node_put() on the child node to possibly release the node.

In the Linux kernel, the following vulnerability has been resolved: power: supply: cw2015: Fix potential null-ptr-deref in cw_bat_probe() cw_bat_probe() calls create_singlethread_workqueue() and not checked the ret value, which may return NULL. And a null-ptr-deref may happen: cw_bat_probe() create_singlethread_workqueue() # failed, cw_bat->wq is NULL queue_delayed_work() queue_delayed_work_on() __queue_delayed_work() # warning here, but continue __queue_work() # access wq->flags, null-ptr-deref Check the ret value and return -ENOMEM if it is NULL.

In the Linux kernel, the following vulnerability has been resolved: net: stmmac: Correctly handle Rx checksum offload errors The stmmac_rx function would previously set skb->ip_summed to CHECKSUM_UNNECESSARY if hardware checksum offload (CoE) was enabled and the packet was of a known IP ethertype. However, this logic failed to check if the hardware had actually reported a checksum error. The hardware status, indicating a header or payload checksum failure, was being ignored at this stage. This could cause corrupt packets to be passed up the network stack as valid. This patch corrects the logic by checking the `csum_none` status flag, which is set when the hardware reports a checksum error. If this flag is set, skb->ip_summed is now correctly set to CHECKSUM_NONE, ensuring the kernel's network stack will perform its own validation and properly handle the corrupt packet.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: validate userq buffer virtual address and size It needs to validate the userq object virtual address to determine whether it is residented in a valid vm mapping.

In the Linux kernel, the following vulnerability has been resolved: sctp: Prevent TOCTOU out-of-bounds write For the following path not holding the sock lock, sctp_diag_dump() -> sctp_for_each_endpoint() -> sctp_ep_dump() make sure not to exceed bounds in case the address list has grown between buffer allocation (time-of-check) and write (time-of-use).

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix potential UAF in smb2_close_cached_fid() find_or_create_cached_dir() could grab a new reference after kref_put() had seen the refcount drop to zero but before cfid_list_lock is acquired in smb2_close_cached_fid(), leading to use-after-free. Switch to kref_put_lock() so cfid_release() is called with cfid_list_lock held, closing that gap.