CVE Feed

In the Linux kernel, the following vulnerability has been resolved: fbdev: clear fb_info->mode before deleting a videomode fb_set_var() can delete a mode from info->modelist when userspace passes FB_ACTIVATE_INV_MODE through FBIOPUT_VSCREENINFO. The code checks that the mode being deleted is not the current info->var and that fbcon is not using it, but it does not check fb_info->mode. fb_info->mode may still point into the modelist entry being deleted. If the entry is freed, later mode sysfs reads through show_mode() can dereference a stale pointer. Clear fb_info->mode before calling fb_delete_videomode() when it matches the mode being removed.

In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - zero report size on F54 work error In rmi_f54_work(), if an error occurs during report request or command verification, the code jumped directly to the 'error' label, bypassing the 'abort' label where f54->report_size was normally zeroed out. This left f54->report_size containing its previous successful payload size. If a user then altered the V4L2 format to a smaller size, and a subsequent run failed, rmi_f54_buffer_queue() would copy the stale, larger payload size into the shrunken V4L2 buffer, causing a heap buffer overflow. Fix this by merging the 'abort' and 'error' labels into a single 'out' exit path, and ensuring that f54->report_size is always set to 0 on failure by checking for error and zeroing the local report_size first.

In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - propagate F54 worker errors to V4L2 queue Previously, rmi_f54_buffer_queue() waited for the worker thread to finish but ignored whether it succeeded. If the worker failed (e.g., due to a timeout or register read failure), the queue thread would silently return success, delivering stale or uninitialized memory to userspace. Add a 'report_error' field to struct f54_data to store the worker's exit status. Check this field in rmi_f54_buffer_queue() after the worker finishes, and mark the buffer as VB2_BUF_STATE_ERROR if an error occurred.

In the Linux kernel, the following vulnerability has been resolved: Input: hynitron_cstxxx - validate touch count and finger IDs The driver allocates max_touch_num input slots, which are indexed from zero through max_touch_num - 1. The current check allows a finger ID equal to max_touch_num to reach cst3xx_report_contact(). While the input core ignores out-of-range slot indices, reporting touch data without a valid slot change corrupts the touch state of the previously active slot. The touch count is read from the controller's report and is used to index the fixed-size report buffer without first checking its range. Reject counts larger than the supported number of touch slots before checking the trailing byte or parsing touch data. Reject finger IDs equal to or greater than max_touch_num, and return immediately when an invalid finger ID is encountered so that corrupt touch frames are discarded instead of reporting partial contact state. The V821 Avaota F1 board configures the vendor driver with one touch slot, so finger ID 1 is already invalid on that device.

In the Linux kernel, the following vulnerability has been resolved: s390/vfio_ccw: Limit the number of channel program segments The processing of channel programs, and the CCWs within them, is done recursively. As such, there is an arbitrary (but not architectural) limit to the number of CCWs that can exist in a single channel program. The vfio-ccw logic breaks these channel programs into segments whenever it encounters a Transfer-In-Channel (TIC) CCW, and the combined number of segments count towards the global limit. Impose an equivalent limit to the number of segments until such logic can be made non-recursive.

In the Linux kernel, the following vulnerability has been resolved: s390/vfio_ccw: Move cp cleanup out of not operational The fsm_notoper() routine is called when the device has been lost, and is (by definition) no longer operational. Since this can happen asynchronously from the normal behavior of the driver, the cleanup may happen when holding other locks in the calling sequence (notably, the cio subchannel lock). Push the cleanup of the private->cp resources to a workqueue, where it can be done out from under that lock sequence and a future patch can safely manage the locking requirements.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: validate GEM_CREATE domain combinations AMDGPU_GEM_CREATE checked domain bits against AMDGPU_GEM_DOMAIN_MASK, but did not validate domain combinations. Userspace could combine CPU|GTT|VRAM with DOORBELL, GDS, GWS, or OA, making amdgpu_bo_placement_from_domain() exceed AMDGPU_BO_MAX_PLACEMENTS and hit BUG_ON(). Allow combinations only within CPU/GTT/VRAM, and require non-CPU/GTT/ VRAM domains to be specified one at a time. Return -EINVAL for invalid combinations in amdgpu_gem_create_ioctl(). v2: Rename helper from amdgpu_gem_domain_valid() to amdgpu_gem_are_domains_valid() (Christian) (cherry picked from commit db39852d0c39843cb02048dfb47e4b8c703e9080)

The device metadata import interface /device/instance/{productId}/property-metadata/import of jetlinks community 2.11 is vulnerable to Server-side request forgery (SSRF).

In the Linux kernel, the following vulnerability has been resolved: openrisc: signal: do not restore privileged SR bits on sigreturn restore_sigcontext() copies the whole supervision register (SR) from the signal frame and only clears SPR_SR_SM before the value is reloaded into the hardware SR (through ESR and l.rfe) on the return to user space. All other SR bits are left under user control. An unprivileged task can thus return from a signal handler through a crafted sigframe that clears SPR_SR_DME. With the data MMU disabled the CPU performs no translation or protection on data accesses, so the task gains read and write access to arbitrary physical memory, a local privilege escalation. SPR_SR_IME, SPR_SR_SUMRA, SPR_SR_LEE, SPR_SR_EPH and the cache-enable bits are exposed the same way. The ptrace GPR regset already refuses any change to SR for exactly this reason. Restore only the arithmetic flag bits (F, CY, OV) from the signal frame and take every privileged control bit from the SR the kernel saved on signal entry. Verified with qemu-system-or1k -M or1k-sim: before this change an unprivileged PoC clears SPR_SR_DME in rt_sigreturn and writes a marker to physical address 0x03000000 (beyond the kernel's mem=32M); afterwards the same PoC receives SIGSEGV and physical memory is unchanged.

In the Linux kernel, the following vulnerability has been resolved: libceph: Avoid using invalid osd indices from primary_temp A corrupted osdmap received from a Ceph monitor or OSD may contain osd indices in its pg_temp, primary_temp, pg_upmap, and pg_upmap_items parts that don't exist, i.e., that are greater than max_osd or smaller than CEPH_HOMELESS_OSD (-1). These indices are used to create the up and acting set in ceph_pg_to_up_acting_osds(), called from calc_target(). While most of these osd indices are checked, the one from primary_temp is not. Subsequently, this may lead to calc_target() returning this (potentially invalid) index as target osd for a (linger) request. Because the osd_state, osd_weight, and osd_addr arrays only contain max_osd entries (with indices 0 to max_osd -1), this leads to out-of-bounds accesses when trying to read values from these arrays. This patch fixes the issue by adding a check to get_temp_osds(), so that only valid osd indices from primary_temp are used, and it falls back to using the primary from pg_temp or the up set if it is invalid. [ idryomov: changelog ]

In the Linux kernel, the following vulnerability has been resolved: s390/vfio_ccw: Cancel existing workqueues The initialization of the io_work and crw_work workqueues begs the question of whether they should be un-initialized. Add the corresponding cleanup tags in _release_dev to ensure work isn't dispatched after the private struct is free'd.

In the Linux kernel, the following vulnerability has been resolved: perf: Reject exited events as group leaders perf_event_remove_on_exec() sets remove-on-exec events to the EXIT state and detaches their group relationships. The event's file descriptor can remain open, however, and perf_event_open() currently accepts that event as a group leader because its early validation rejects only REVOKED and DEAD events. A new sibling can consequently be linked to the detached leader. When the leader is closed, perf_group_detach() observes that its PERF_ATTACH_GROUP bit is already clear and skips the new sibling. The sibling then retains a group_leader pointer to the freed event. Reject group leaders in the EXIT state. Perform the check while holding the shared context mutex so that an exec in the target task cannot detach the leader between validation and group attachment. [peterz: make the earlier test fully consistent]

In the Linux kernel, the following vulnerability has been resolved: scsi: core: pair EH runtime PM get and put shost->eh_noresume is currently consulted twice in one error handling iteration: once before scsi_autopm_get_host() and once again before scsi_autopm_put_host(). That is racy when a PM-triggered error path flips shost->eh_noresume while the SCSI EH thread is still running. The problem flow looks like this: PM path ufshcd_set_dev_pwr_mode() shost->eh_noresume = 1 ufshcd_execute_start_stop <-- trigger EH ... shost->eh_noresume = 0 EH path scsi_error_handler() if (!shost->eh_noresume) scsi_autopm_get_host() <-- skipped ... if (!shost->eh_noresume) scsi_autopm_put_host() <-- executed later In that case one EH iteration can skip autoresume on entry and still drop a runtime PM reference on exit. That leaves an unmatched runtime PM put and can trigger a runtime PM usage count underflow. Fix this by making eh_noresume a regular bool so it can be accessed with READ_ONCE() and WRITE_ONCE(). Snapshot it once per EH iteration and use that snapshot for both runtime PM get and put decisions.

In the Linux kernel, the following vulnerability has been resolved: ovpn: defer key slot crypto freeing to workqueue Key slots are released through a kref and the existing release path frees the AEAD transforms from an RCU callback. That is not safe for all crypto implementations: crypto_free_aead can sleep, for example when an async or hardware implementation has teardown work to complete. Use queue_rcu_work for key-slot release. This keeps the RCU grace period needed by lockless key-slot readers, but runs the actual crypto teardown from workqueue context where sleeping is allowed. Once the rcu_work callback runs, pre-existing RCU readers are gone, and the final kref put already proves that no transform user remains, so the worker can release the AEAD transforms and free the slot directly. The previous patch drains ovpn_wq during module exit, so queued key-slot teardown work cannot outlive module text.

In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: fix refcount race between list:set GC and swap __ip_set_put_byindex() resolved the index to a set pointer under RCU, then took ip_set_ref_lock in __ip_set_put() to decrement set->ref. ip_set_swap() holds that same lock while swapping both the ip_set_list slots and the two sets' ref counters, so it can interleave between the dereference and the lock acquisition, leaving the caller to decrement a set whose reference already moved to the other index and hit BUG_ON(set->ref == 0). list_set_gc() reaches this from timer softirq, which the nfnl mutex does not serialize against swap: an expiring list:set member calls list_set_del() -> ip_set_put_byindex() while IPSET_CMD_SWAP runs on the referenced sets. Resolve the index and decrement under ip_set_ref_lock, as ip_set_swap() already does, keeping the refcount tied to the index rather than to a stale set pointer. kernel BUG at net/netfilter/ipset/ip_set_core.c:685! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:ip_set_put_byindex (net/netfilter/ipset/ip_set_core.c:870) Call Trace: <IRQ> list_set_del (net/netfilter/ipset/ip_set_list_set.c:159) set_cleanup_entries (net/netfilter/ipset/ip_set_list_set.c:181) list_set_gc (net/netfilter/ipset/ip_set_list_set.c:578) call_timer_fn (kernel/time/timer.c:1748) __run_timers (kernel/time/timer.c:1799 kernel/time/timer.c:2374) run_timer_softirq (kernel/time/timer.c:2405) </IRQ> Kernel panic - not syncing: Fatal exception in interrupt

Stomper 5e2741e is vulnerable to Use-After-Free. When a client sends multiple CONNECT frames on the same TCP connection, and subsequently another client (or a later connection) sends SEND frames to a destination previously subscribed on that connection, the broker may dereference a pointer to a StompStreamSocket object that has already been freed. This results in a heap use-after-free and process crash. Because the protocol does not authenticate or restrict such sequences by default.

An issue was discovered in openRISC OR1200 commit 83ac6b. An inaccurate update of program counter (PC) values when SPR changes can lead to a Denial of Service (DoS).

In the Linux kernel, the following vulnerability has been resolved: gpio: ml-ioh: use raw_spinlock_t for the register lock ioh_irq_type() is registered as the irq_chip .irq_set_type callback and takes chip->spinlock with spin_lock_irqsave(). This callback is reached from __setup_irq() -> __irq_set_trigger() -> chip->irq_set_type() while the caller holds desc->lock, a raw_spinlock_t, with hardirqs disabled. That context is not sleepable, but on PREEMPT_RT a regular spinlock_t is an rtmutex-backed sleeping lock, so acquiring it there is invalid. ioh_irq_enable() and ioh_irq_disable() take the same lock from the .irq_enable/.irq_disable callbacks, which are likewise invoked with desc->lock held. Convert the register lock to raw_spinlock_t. The same lock also serializes the GPIO direction/value callbacks and the suspend/resume register save/restore, and those critical sections only perform short sequences of MMIO register accesses (ioread32()/iowrite32()); the .irq_set_type callback additionally emits a dev_warn() on an unsupported type. None of these are sleepable operations, so keeping this register lock non-sleeping is appropriate for the irqchip callbacks and does not change the GPIO-side locking contract. This is the same fix as commit a02b8950d619 ("gpio: pch: use raw_spinlock_t for the register lock"); this driver shares the same structure as gpio-pch.

In the Linux kernel, the following vulnerability has been resolved: s390/vfio_ccw: Selectively expand io_mutex The io_mutex was defined to serialize the io_regions, but then has also sort of been associated with the I/O themselves because of the close relationship they share. With the handful of races that are possible, the choices are either to: A) expand the scope of io_mutex to close these remaining windows, or B) reduce the scope of io_mutex to just io_region, and introduce a new lock mechanism for the remaining I/O resources This patch implements A, since B brings with it a lot more interactions that would need to be tracked and kept in a correct hierarchy. It also takes advantage of the workqueue element for cp_free() that now gets called out of fsm_notoper(), which could be invoked out of an interrupt context and thus cannot acquire a mutex itself.

In the Linux kernel, the following vulnerability has been resolved: Input: sur40 - fix input device registration ordering In sur40_probe(), input_register_device() was previously called early before the V4L2 video device and vb2_queue components were fully initialized. If userspace opened the input device immediately upon registration, sur40_open() would trigger and start the sur40_poll() worker thread. This worker thread invokes sur40_process_video() and accesses the uninitialized vb2_queue structure, leading to a data race and potential system crash. Furthermore, if V4L2 or video registration failed after input_register_device() succeeded, the error path fell through to calling input_free_device() on a successfully registered device instead of input_unregister_device(), corrupting input core state. Move input_register_device() to the very end of sur40_probe(). This ensures the V4L2 and video queue structures are fully initialized before polling can start, and naturally resolves the error path bug since input_free_device() is now only called when input registration has not yet occurred. To maintain strict LIFO (Last-In, First-Out) teardown ordering, also move input_unregister_device() to the very beginning of sur40_disconnect(). This guarantees that the input polling worker thread is stopped before V4L2 video components or control handlers are unregistered.

In the Linux kernel, the following vulnerability has been resolved: s390/vfio_ccw: Fix out of bounds check on CCW array The routine ccwchain_calc_length() counts the number of channel command words (CCWs) that are chained together in a single channel program, and rejects anything larger than CCWCHAIN_LEN_MAX (256) CCWs. The loop itself is "do..while (count < 257)", and while the logic in is_cpa_within_range() correctly adjusts between the 0-index array of CCWs and the count of CCWs starting at 1, this means it would look at a possible 257th CCW before ending the loop and (correctly) returning an error. Fix this by restructuring the loop to break as soon as 256 CCWs (thus indexes 0-255) are examined, without looking at memory outside the range.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix NULL pointer dereference in amdgpu_dm_crtc_set_vblank() amdgpu_dm_crtc_set_vblank() dereferences acrtc_state->stream when vblank is enabled/queried from DRM_IOCTL_MODE_CRTC_GET_SEQUENCE before a stream is attached to it. BUG: kernel NULL pointer dereference, address: 0000000000000008 RIP: amdgpu_dm_crtc_set_vblank+0x6b/0x4d0 [amdgpu] Call Trace: drm_vblank_enable drm_vblank_get drm_crtc_get_sequence_ioctl drm_ioctl_kernel drm_ioctl Reproduced by running VKCTS with WSI tests enabled on RADV. Guard the enable path on acrtc_state->stream being non-NULL, matching the existing checks in this function. (cherry picked from commit 7b1b31bf6942e6f43509b48da23f8e27269aac39)

DWSurvey v6.14.0 is is vulnerable to authentication bypass via the '/api/dwsurvey/none/' and '/api/dwsurvey/up/**' parameters.

In DocSys-master V2.02.85, the downloadDocEx interface in src/com/DocSystem/controller/DocController.java has an arbitrary file read vulnerability:

The Netty configuration distribution service (port 8283) of super-diamond-server <= 1.3.3 has no authentication mechanism. Attackers can directly obtain the full configuration of any project (including database passwords, API keys, etc.) by sending a TCP request without any credential.

Path traversal vulnerability in UnPoller 2.33.0 password field allows arbitrary file read and network exfiltration.

Cohere North AI v1.1.5 was discovered to contain an information leak via the WebSocket Endpoint.

yx-image-recognition v1.0 is vulnerable to Path Traversal. Parameters such as dir, filePath are directly passed to new File() for file system operations without any path sanitization or whitelist validation.

In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: lpass-tx-macro: Fix enum kcontrol accesses The "DEC0 MODE" to "DEC7 MODE" controls are enumerated, but tx_macro_dec_mode_get() and tx_macro_dec_mode_put() access their value through ucontrol->value.integer.value[0] (a long) instead of ucontrol->value.enumerated.item[0] (an unsigned int). This same pattern was fixed in the sibling drivers by commit bcfe5f76cc40 ("ASoC: codecs: rx-macro: fix accessing array out of bounds for enum type") and commit 0ea5eff7c606 ("ASoC: codecs: va-macro: fix accessing array out of bounds for enum type"), but tx-macro was missed. On 64-bit kernels built with CONFIG_SND_CTL_DEBUG, the elem value sanity check catches the 4 bytes written past the enumerated item and every read of these controls fails with -EINVAL: snd-sm8250 sound: control 2:0:0:DEC0 MODE:0: access overflow

In the Linux kernel, the following vulnerability has been resolved: crypto: tegra - fix rctx->cryptlen calculation in tegra_gcm_do_one_req() Perform rctx->cryptlen calculation in tegra_gcm_do_one_req() the same way it is done in tegra_ccm_crypt_init(). The current formulae may lead to a crash if a caller does not call tegra_gcm_setauthsize() and so ctx->authsize remains zero. Then a decrypt operation with incorrect rctx->cryptlen will lead to a write beyound rctx->dst_sg buffer. As a follow-up cleanup delete struct tegra_aead_ctx->authsize field since it appears to be completely unused. Also simplify tegra_ccm_setauthsize() and tegra_gcm_setauthsize() functions respectively.

In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - bound the F54 report size to the allocated buffer rmi_f54_work() reads a diagnostics report from the device into f54->report_data, sizing the transfer with rmi_f54_get_report_size(): report_size = rmi_f54_get_report_size(f54); ... for (i = 0; i < report_size; i += F54_REPORT_DATA_SIZE) { int size = min(F54_REPORT_DATA_SIZE, report_size - i); ... rmi_read_block(.., f54->report_data + i, size); } report_data is allocated once at probe from F54's own electrode counts (array3_size(f54->num_tx_electrodes, f54->num_rx_electrodes, sizeof(u16))), but rmi_f54_get_report_size() computes the size from drv_data->num_*_electrodes when those are set, i.e. from the F55 function's electrode counts. Both counts come straight from device queries (F54 and F55 each report up to 255 electrodes) and nothing constrains the F55 counts to the F54 ones. A malicious or malfunctioning RMI4 device that reports larger F55 electrode counts than its F54 counts makes report_size exceed the allocation, so the read loop writes past report_data (and the V4L2 dequeue memcpy() then reads past it). On conforming hardware the F55 configured electrodes are a subset of the F54 physical electrodes, so report_size never exceeds the buffer and well-behaved devices are unaffected. Record the allocation size and reject a report that does not fit, mirroring the existing zero-size check.

In the Linux kernel, the following vulnerability has been resolved: af_unix: Unlink scc_entry in unix_del_edge(). Kyle Zeng reported that GC could free a dead SCC partially. The scenario is as follows: 1) Create two SCCs: X -. A <-> B ^--' 2) Run the following concurrently: 2-1) send() sk-B to sk-B from sk-X 2-2) close() both A and B At 2-1), there is a small window where unix_add_edges() publishes a new edge (B <-> B) to GC but its skb is not queued by skb_queue_tail(). If 2-2) completes before skb_queue_tail() and GC is triggered, it judges A <-> B as dead, but B is not freed because GC cannot collect the not-yet-queued skb holding the B <-> B edge. X -. A <-> B -. This edge is visible ^--' ^..' but skb is not This itself is not a problem since the next GC run will judge B as dead as well and free it finally. X -. A <.> B -. ^--' ^--' However, X's SCC forces the next GC to call unix_walk_scc_fast(), and it iterates over A through B's scc_entry. Let's unlink scc_entry before freeing the vertex in unix_del_edge().

In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Improve EP11 CPRB domain handling with ASN.1 parsing The zcrypt_msgtype6_send_ep11_cprb() function uses fragile struct overlays to access and modify the domain field in the EP11 CPRB payload, creating maintainability and security concerns: 1. Struct overlay approach (pld_hdr) assumes fixed payload structure and doesn't validate the actual ASN.1 encoding. 2. Complex length format detection logic is error-prone and doesn't properly validate bounds at each parsing step. 3. Direct struct member access bypasses proper ASN.1 validation. Fix by replacing struct overlays with explicit ASN.1 parsing that validates each field (payload tag/length, function tag/length/value, optional domain tag/length/value) with proper bounds checking at every step. Add asn1_int_encode() helper function to safely write integer values with correct endianness conversion. This makes the code consistent with the validation pattern introduced with the rework of the xcrb_msg_to_type6_ep11cprb_msgx() function.

In the Linux kernel, the following vulnerability has been resolved: mptcp: fastopen: only mark MPTFO subflows with SYN data Passive TCP Fast Open accepts a valid-cookie SYN even when it carries no data. In that case the child socket's receive queue is intentionally left empty. mptcp_fastopen_subflow_synack_set_params() set is_mptfo before checking for queued SYN data. That made data-less TFO SYNs hit a WARN and, if the warning was non-fatal, left stale MPTFO state behind. The stale flag could later trigger a state-confusion bug in check_fully_established(). Only mark the subflow as MPTFO after confirming that an SKB was queued. Return quietly when the receive queue is empty. Note that mptcp_subflow_context's is_mptfo field is now not just about subflows where the TFO was present, but about MPTFO subflow that consumed SYN data. Only having a valid cookie but not carrying data is not really "doing TFO".

In the Linux kernel, the following vulnerability has been resolved: Input: byd - synchronize timer deletion before freeing private data byd_disconnect() uses timer_delete() before freeing the driver's private data. This does not wait for a running byd_clear_touch() callback, which dereferences the private data and its psmouse pointer. A callback racing with disconnect can therefore access the private data after it has been freed. The timer can also still be re-armed by byd_process_byte() while the disconnect is in progress. Use timer_shutdown_sync() before freeing the private data: it waits for a running callback and turns any later re-arm attempt into a no-op.

In the Linux kernel, the following vulnerability has been resolved: fbdev: bound mode sysfs output to the sysfs buffer mode_string() uses snprintf() which can return a value larger than the remaining buffer space. show_modes() accumulates the return value into i without checking whether i has reached PAGE_SIZE, causing the offset to advance past the sysfs buffer if the modelist is long enough. Add a size parameter to mode_string() and use scnprintf() to return only the bytes actually written. Add an early return when offset already exceeds the buffer. In show_modes(), stop accumulating once the buffer is full.

In the Linux kernel, the following vulnerability has been resolved: ceph: fix hanging __ceph_get_caps() with stale mds_wanted A reader can hang forever in __ceph_get_caps() when the client no longer holds `FILE_RD`, but local cap state still says that the capability is already wanted (via `mds_wanted`). One way to trigger this is through MDS cap revocation. If another client performs a conflicting operation, the MDS can revoke `FILE_RD` from the reader; the next read then has to reacquire `FILE_RD`. If the cap update that should request `FILE_RD` never reaches the MDS after `cap->mds_wanted` was raised, the reader is left holding only non-file caps while local `mds_wanted` still includes the file read caps. In that state, try_get_cap_refs() sees `need <= mds_wanted` and returns 0, so __ceph_get_caps() just waits on `i_cap_wq`. If the cap update that was supposed to request `FILE_RD never reaches the MDS after `cap->mds_wanted was` raised, no further request is sent and the waiter can sleep indefinitely until unrelated cap traffic happens to wake it up. The ordering issue is that `cap->mds_wanted` is updated in __prep_cap() before the `CEPH_MSG_CLIENT_CAPS message` is actually queued for send. That makes one field serve two different meanings at once: what this client wants, and what the client believes the MDS already knows it wants. A proper fix would be to split those states and track whether a cap update is actually in flight or has been observed by the MDS. However, simply moving the `cap->mds_wanted assignment` later would not be sufficient: queueing the message in the messenger does not guarantee that the MDS processed that specific wanted set, and reconnect or message loss can still invalidate that assumption. Fixing that properly would require a larger rework of the cap state machine. To allow simpler backports to stable kernels, this patch implements a simpler workaround: - stop waiting forever in __ceph_get_caps(); after a bounded wait, fall back to the renew path - make ceph_renew_caps() issue a synchronous `OPEN` request whenever the inode still does not actually hold the wanted caps, instead of only calling ceph_check_caps() The extra issued-vs-wanted check in ceph_renew_caps() is necessary because the previous test only checked whether the inode still had any real caps at all. That is not enough after revocation: the client can still hold something like `pLs` and yet be missing `FILE_RD` completely. In that case, falling back to ceph_check_caps() is not sufficient, because it still trusts `cap->mds_wanted` and may resend nothing. By requiring `(issued & wanted) == wanted` before taking the asynchronous path, the code only uses ceph_check_caps() when the `wanted caps` are already actually issued. Otherwise, it sends the synchronous `OPEN` renew. This preserves the existing asynchronous fast path when the wanted caps are already issued, avoids changing cap-state semantics, and fixes the hang by guaranteeing that a stalled waiter eventually retries through a path that does not rely on the stale `mds_wanted` state. [ idryomov: move CEPH_GET_CAPS_WAIT_TIMEOUT from libceph.h to mds_client.h, formatting ]

In the Linux kernel, the following vulnerability has been resolved: xfs: fix off-by-one in rtrefcount btree root level validation xfs_rtrefcountbt_compute_maxlevels() sets mp->m_rtrefc_maxlevels = min(d_maxlevels, r_maxlevels) + 1; where the trailing "+ 1" already accounts for the inode-root level, so the deepest valid on-disk root level is m_rtrefc_maxlevels - 1 and a cursor must satisfy bc_nlevels <= bc_maxlevels (= m_rtrefc_maxlevels). The two on-disk validation paths, xfs_rtrefcountbt_verify() and xfs_iformat_rtrefcount(), check the root level with ">" instead of ">=", so a crafted rtreflink (metadir + realtime + reflink) image whose /rtgroups/N.refcount inode has bb_level == m_rtrefc_maxlevels is accepted on mount. xfs_rtrefcountbt_init_cursor() then sets bc_nlevels = bb_level + 1, exceeding bc_maxlevels by one. Since the xfs_rtrefcountbt_cur slab object is sized for exactly bc_maxlevels entries, the first btree op on such a cursor indexes bc_levels[m_rtrefc_maxlevels] past the end of the object. This is reached by the first rtrefcount cursor built after mount, via log/CoW recovery (xfs_reflink_recover_cow() during xfs_mountfs()) or an FS_IOC_GETFSMAP over the realtime device. Reject a root level equal to m_rtrefc_maxlevels, matching the ">=" form already used by the sibling data-device refcount/rmap verifiers and the in-memory rtrmap verifier. BUG: KASAN: slab-out-of-bounds in xfs_btree_lookup (fs/xfs/libxfs/xfs_btree.c:2101) Write of size 2 at addr ffff888018391658 by task exploit/144 xfs_btree_lookup (fs/xfs/libxfs/xfs_btree.c:2101) xfs_btree_query_range (fs/xfs/libxfs/xfs_btree.c:5308) xfs_refcount_recover_cow_leftovers (fs/xfs/libxfs/xfs_refcount.c:2113) xfs_reflink_recover_cow (fs/xfs/xfs_reflink.c:1085) xlog_recover_finish (fs/xfs/xfs_log_recover.c:3551) xfs_mountfs (fs/xfs/xfs_mount.c:1158) xfs_fs_fill_super (fs/xfs/xfs_super.c:1940) get_tree_bdev_flags (fs/super.c:1634) vfs_get_tree (fs/super.c:1694) path_mount (fs/namespace.c:4161) __x64_sys_mount (fs/namespace.c:4367) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) The buggy address belongs to the cache xfs_rtrefcountbt_cur of size 216 The buggy address is located 8 bytes to the right of allocated 216-byte region [ffff888018391578, ffff888018391650) Kernel panic - not syncing: Fatal exception

In the Linux kernel, the following vulnerability has been resolved: riscv: lib: Fix ZBB strnlen reading past count boundary The ZBB-optimized strnlen loop loads one word ahead before checking the aligned boundary: REG_L t1, SZREG(t0) // load next word addi t0, t0, SZREG // advance orc.b t1, t1 bgeu t0, t4, 4f // boundary check AFTER load where t4 = (s + count) & -SZREG. When s is aligned and count is a multiple of SZREG, t4 equals s + count and the loop loads a full word starting at exactly s + count. If s + count falls on a page boundary with the next page unmapped, this faults. Fix by computing the aligned boundary from the last valid byte (s + count - 1) instead of s + count. This makes the loop stop at the word containing the last valid byte rather than potentially loading the word after it. The count == 0 case is already handled by the beqz early exit. Also add a pre-loop guard (bgeu t0, t4) for the case where all valid bytes fit within the first word. With the adjusted boundary, t4 can equal t0, and entering the loop with stale register state from the first-word processing would produce incorrect results. The final minu clamp ensures the result is still correct when the last loaded word extends past s + count - 1 within the same aligned word.

In the Linux kernel, the following vulnerability has been resolved: eth: bnxt: avoid deadlock when canceling IRQ affinity notifier Unregistering IRQ affinity notifiers waits for the callback synchronously. bnxt takes the netdev instance lock in the notifier (to restart the queue) and cancels the work under the same lock. This may obviously deadlock. Move the restart to the async service task. The queue restart isn't super time sensitive. Store the new TPH tag, schedule the task. Safely canceling the service task is already ironed out. In bnxt_request_irq() the order of registering notifier, affinity and initial TPH programming has to be inverted. I think it was racy previously since user may trigger an update as soon as notifier is installed. There's a small known gap - if pcie_tph_get_cpu_st() fails at init and the target tag is 0 we may miss programming the entry. This does not seem worth fixing, the code has skip-on-failure all over the place, anyway.

A flaw was found in the ipa_getkeytab module of the community.general Ansible collection. The module's bind_pw parameter, used to supply the LDAP simple-bind password when retrieving a Kerberos keytab, is not declared with no_log, unlike the sibling password parameter in the same module. As a consequence, the supplied IPA/LDAP bind password is recorded in cleartext in the managed host's system journal/syslog (the module's "Invoked with" record), is included in the module's return values and verbose (-v) output, and is displayed in Automation Controller / AWX job output. The password is additionally passed on the command line to the ipa-getkeytab helper (as --bindpw <value>), exposing it in the process list to local users while the command runs. An attacker able to read these logs, job output, or the process table can obtain the directory bind credential, potentially compromising the accounts and objects that credential can access.

disconf (Distributed Configuration Management Platform) 2.6.36 is vulnerable to Incorrect Access Control. The config-fetching APIs /api/config/item, /api/config/file, /api/config/list and /api/config/simple/list are exposed without authentication. The LoginInterceptor explicitly whitelists these four paths, so any anonymous attacker can read every configuration item and configuration file managed by the config center.

Funiture 1.0.0 is vulnerable to SQL Injection in the backend tool interfaces /sys/tool/select.json and /sys/tool/update.json.

In the Linux kernel, the following vulnerability has been resolved: rseq: Prevent hard lockup on granted time slice extension __exit_to_user_mode_loop() invokes rseq_grant_timeslice_extension() with interrupts enabled. If the extension is granted it invokes hrtimer_rearm_deferred_tif() to ensure that a pending deferred hrtimer rearm is handled before exiting to user space. Though this invokes __hrtimer_rearm_deferred() which expects to be invoked with interrupts disabled as it takes hrtimer_cpu_base::lock with raw_spin_lock(). That's a livelock waiting to happen and caught by lockdep: WARNING: ./include/linux/hrtimer_rearm.h:17 at irqentry_exit, CPU#1: slice_test WARNING: inconsistent lock state inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. Prevent this by disabling interrupts around the invocation of hrtimer_rearm_deferred_tif() in rseq_grant_timeslice_extension(). [ tglx: Massaged change log ]

An issue in Vanderbilt Industries, Acre Security SPC5300.000 Main Board v.3.14.1 allows a physically proximate attacker to cause a denial of service via the SPC Connect Pro software accepts replayed application-layer payloads injected into an active TCP session.

Comfast CF-N1-S firmware 2.6.0.1 and CF-WR630AX (2024-01-30 build), the update_interface_png SET handler in /usr/bin/webmgnt fails to sanitize the display_name parameter. User-controlled input is concatenated via sprintf() into the unquoted shell command `/etc/rrd/graphinterface %s %s` and executed by system() with root privileges. A remote authenticated attacker can inject arbitrary commands

tamguo 1.5.3 is vulnerable to Unrestricted File Upload Leading to Stored XSS. The /uploadFile and /imgUpload endpoints in FileUploadController.java and UEditorController.java have no file type validation. Attackers can upload arbitrary HTML/JavaScript files to the server.

In DocSys-master V2.02.85, the uploadMarkdownPic interface in src/com/DocSystem/controller/DocController.java has an arbitrary file upload vulnerability:

A zero-click remote code execution (RCE) vulnerability in the /Terminal/Notification.hs component of SimpleX Chat before v6.5 allows attackers to execute arbitrary commands in the context of the application without user interaction via sending a crafted payload in a text message.

An issue in Wgcloud 3.6.4 allows a remote attacker to escalate privileges via the content parameter is directly concatenated to the ProcessBuilder.