CVE Feed

In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Fix kernel panic on partial unmap of a GPU VA region This commit address a kernel panic issue that can happen if Userspace tries to partially unmap a GPU virtual region (aka drm_gpuva). The VM_BIND interface allows partial unmapping of a BO. Panthor driver pre-allocates memory for the new drm_gpuva structures that would be needed for the map/unmap operation, done using drm_gpuvm layer. It expected that only one new drm_gpuva would be needed on umap but a partial unmap can require 2 new drm_gpuva and that's why it ended up doing a NULL pointer dereference causing a kernel panic. Following dump was seen when partial unmap was exercised. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000078 Mem abort info: ESR = 0x0000000096000046 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x06: level 2 translation fault Data abort info: ISV = 0, ISS = 0x00000046, ISS2 = 0x00000000 CM = 0, WnR = 1, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=000000088a863000 [000000000000078] pgd=080000088a842003, p4d=080000088a842003, pud=0800000884bf5003, pmd=0000000000000000 Internal error: Oops: 0000000096000046 [#1] PREEMPT SMP <snip> pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : panthor_gpuva_sm_step_remap+0xe4/0x330 [panthor] lr : panthor_gpuva_sm_step_remap+0x6c/0x330 [panthor] sp : ffff800085d43970 x29: ffff800085d43970 x28: ffff00080363e440 x27: ffff0008090c6000 x26: 0000000000000030 x25: ffff800085d439f8 x24: ffff00080d402000 x23: ffff800085d43b60 x22: ffff800085d439e0 x21: ffff00080abdb180 x20: 0000000000000000 x19: 0000000000000000 x18: 0000000000000010 x17: 6e656c202c303030 x16: 3666666666646466 x15: 393d61766f69202c x14: 312d3d7361203a70 x13: 303030323d6e656c x12: ffff80008324bf58 x11: 0000000000000003 x10: 0000000000000002 x9 : ffff8000801a6a9c x8 : ffff00080360b300 x7 : 0000000000000000 x6 : 000000088aa35fc7 x5 : fff1000080000000 x4 : ffff8000842ddd30 x3 : 0000000000000001 x2 : 0000000100000000 x1 : 0000000000000001 x0 : 0000000000000078 Call trace: panthor_gpuva_sm_step_remap+0xe4/0x330 [panthor] op_remap_cb.isra.22+0x50/0x80 __drm_gpuvm_sm_unmap+0x10c/0x1c8 drm_gpuvm_sm_unmap+0x40/0x60 panthor_vm_exec_op+0xb4/0x3d0 [panthor] panthor_vm_bind_exec_sync_op+0x154/0x278 [panthor] panthor_ioctl_vm_bind+0x160/0x4a0 [panthor] drm_ioctl_kernel+0xbc/0x138 drm_ioctl+0x240/0x500 __arm64_sys_ioctl+0xb0/0xf8 invoke_syscall+0x4c/0x110 el0_svc_common.constprop.1+0x98/0xf8 do_el0_svc+0x24/0x38 el0_svc+0x40/0xf8 el0t_64_sync_handler+0xa0/0xc8 el0t_64_sync+0x174/0x178

In the Linux kernel, the following vulnerability has been resolved: tty: serial: sh-sci: fix RSCI FIFO overrun handling The receive error handling code is shared between RSCI and all other SCIF port types, but the RSCI overrun_reg is specified as a memory offset, while for other SCIF types it is an enum value used to index into the sci_port_params->regs array, as mentioned above the sci_serial_in() function. For RSCI, the overrun_reg is CSR (0x48), causing the sci_getreg() call inside the sci_handle_fifo_overrun() function to index outside the bounds of the regs array, which currently has a size of 20, as specified by SCI_NR_REGS. Because of this, we end up accessing memory outside of RSCI's rsci_port_params structure, which, when interpreted as a plat_sci_reg, happens to have a non-zero size, causing the following WARN when sci_serial_in() is called, as the accidental size does not match the supported register sizes. The existence of the overrun_reg needs to be checked because SCIx_SH3_SCIF_REGTYPE has overrun_reg set to SCLSR, but SCLSR is not present in the regs array. Avoid calling sci_getreg() for port types which don't use standard register handling. Use the ops->read_reg() and ops->write_reg() functions to properly read and write registers for RSCI, and change the type of the status variable to accommodate the 32-bit CSR register. sci_getreg() and sci_serial_in() are also called with overrun_reg in the sci_mpxed_interrupt() interrupt handler, but that code path is not used for RSCI, as it does not have a muxed interrupt. ------------[ cut here ]------------ Invalid register access WARNING: CPU: 0 PID: 0 at drivers/tty/serial/sh-sci.c:522 sci_serial_in+0x38/0xac Modules linked in: renesas_usbhs at24 rzt2h_adc industrialio_adc sha256 cfg80211 bluetooth ecdh_generic ecc rfkill fuse drm backlight ipv6 CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.17.0-rc1+ #30 PREEMPT Hardware name: Renesas RZ/T2H EVK Board based on r9a09g077m44 (DT) pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : sci_serial_in+0x38/0xac lr : sci_serial_in+0x38/0xac sp : ffff800080003e80 x29: ffff800080003e80 x28: ffff800082195b80 x27: 000000000000000d x26: ffff8000821956d0 x25: 0000000000000000 x24: ffff800082195b80 x23: ffff000180e0d800 x22: 0000000000000010 x21: 0000000000000000 x20: 0000000000000010 x19: ffff000180e72000 x18: 000000000000000a x17: ffff8002bcee7000 x16: ffff800080000000 x15: 0720072007200720 x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 x11: 0000000000000058 x10: 0000000000000018 x9 : ffff8000821a6a48 x8 : 0000000000057fa8 x7 : 0000000000000406 x6 : ffff8000821fea48 x5 : ffff00033ef88408 x4 : ffff8002bcee7000 x3 : ffff800082195b80 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff800082195b80 Call trace: sci_serial_in+0x38/0xac (P) sci_handle_fifo_overrun.isra.0+0x70/0x134 sci_er_interrupt+0x50/0x39c __handle_irq_event_percpu+0x48/0x140 handle_irq_event+0x44/0xb0 handle_fasteoi_irq+0xf4/0x1a0 handle_irq_desc+0x34/0x58 generic_handle_domain_irq+0x1c/0x28 gic_handle_irq+0x4c/0x140 call_on_irq_stack+0x30/0x48 do_interrupt_handler+0x80/0x84 el1_interrupt+0x34/0x68 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x6c/0x70 default_idle_call+0x28/0x58 (P) do_idle+0x1f8/0x250 cpu_startup_entry+0x34/0x3c rest_init+0xd8/0xe0 console_on_rootfs+0x0/0x6c __primary_switched+0x88/0x90 ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: media: pci: mg4b: fix uninitialized iio scan data Fix potential leak of uninitialized stack data to userspace by ensuring that the `scan` structure is zeroed before use.

In the Linux kernel, the following vulnerability has been resolved: fuse: fix livelock in synchronous file put from fuseblk workers I observed a hang when running generic/323 against a fuseblk server. This test opens a file, initiates a lot of AIO writes to that file descriptor, and closes the file descriptor before the writes complete. Unsurprisingly, the AIO exerciser threads are mostly stuck waiting for responses from the fuseblk server: # cat /proc/372265/task/372313/stack [<0>] request_wait_answer+0x1fe/0x2a0 [fuse] [<0>] __fuse_simple_request+0xd3/0x2b0 [fuse] [<0>] fuse_do_getattr+0xfc/0x1f0 [fuse] [<0>] fuse_file_read_iter+0xbe/0x1c0 [fuse] [<0>] aio_read+0x130/0x1e0 [<0>] io_submit_one+0x542/0x860 [<0>] __x64_sys_io_submit+0x98/0x1a0 [<0>] do_syscall_64+0x37/0xf0 [<0>] entry_SYSCALL_64_after_hwframe+0x4b/0x53 But the /weird/ part is that the fuseblk server threads are waiting for responses from itself: # cat /proc/372210/task/372232/stack [<0>] request_wait_answer+0x1fe/0x2a0 [fuse] [<0>] __fuse_simple_request+0xd3/0x2b0 [fuse] [<0>] fuse_file_put+0x9a/0xd0 [fuse] [<0>] fuse_release+0x36/0x50 [fuse] [<0>] __fput+0xec/0x2b0 [<0>] task_work_run+0x55/0x90 [<0>] syscall_exit_to_user_mode+0xe9/0x100 [<0>] do_syscall_64+0x43/0xf0 [<0>] entry_SYSCALL_64_after_hwframe+0x4b/0x53 The fuseblk server is fuse2fs so there's nothing all that exciting in the server itself. So why is the fuse server calling fuse_file_put? The commit message for the fstest sheds some light on that: "By closing the file descriptor before calling io_destroy, you pretty much guarantee that the last put on the ioctx will be done in interrupt context (during I/O completion). Aha. AIO fgets a new struct file from the fd when it queues the ioctx. The completion of the FUSE_WRITE command from userspace causes the fuse server to call the AIO completion function. The completion puts the struct file, queuing a delayed fput to the fuse server task. When the fuse server task returns to userspace, it has to run the delayed fput, which in the case of a fuseblk server, it does synchronously. Sending the FUSE_RELEASE command sychronously from fuse server threads is a bad idea because a client program can initiate enough simultaneous AIOs such that all the fuse server threads end up in delayed_fput, and now there aren't any threads left to handle the queued fuse commands. Fix this by only using asynchronous fputs when closing files, and leave a comment explaining why.

In the Linux kernel, the following vulnerability has been resolved: mm/damon/vaddr: do not repeat pte_offset_map_lock() until success DAMON's virtual address space operation set implementation (vaddr) calls pte_offset_map_lock() inside the page table walk callback function. This is for reading and writing page table accessed bits. If pte_offset_map_lock() fails, it retries by returning the page table walk callback function with ACTION_AGAIN. pte_offset_map_lock() can continuously fail if the target is a pmd migration entry, though. Hence it could cause an infinite page table walk if the migration cannot be done until the page table walk is finished. This indeed caused a soft lockup when CPU hotplugging and DAMON were running in parallel. Avoid the infinite loop by simply not retrying the page table walk. DAMON is promising only a best-effort accuracy, so missing access to such pages is no problem.

ALLNET ALL-RUT22GW v3.3.8 was discovered to store hardcoded credentials in the libicos.so library.

Waveshare RS232/485 TO WIFI ETH (B) Serial to Ethernet/Wi-Fi Gateway Firmware V3.1.1.0: HW 4.3.2.1: Webpage V7.04T.07.002880.0301 was discovered to transmit Administrator credentials in plaintext.

In the Linux kernel, the following vulnerability has been resolved: fs/notify: call exportfs_encode_fid with s_umount Calling intotify_show_fdinfo() on fd watching an overlayfs inode, while the overlayfs is being unmounted, can lead to dereferencing NULL ptr. This issue was found by syzkaller. Race Condition Diagram: Thread 1 Thread 2 -------- -------- generic_shutdown_super() shrink_dcache_for_umount sb->s_root = NULL | | vfs_read() | inotify_fdinfo() | * inode get from mark * | show_mark_fhandle(m, inode) | exportfs_encode_fid(inode, ..) | ovl_encode_fh(inode, ..) | ovl_check_encode_origin(inode) | * deref i_sb->s_root * | | v fsnotify_sb_delete(sb) Which then leads to: [ 32.133461] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI [ 32.134438] KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] [ 32.135032] CPU: 1 UID: 0 PID: 4468 Comm: systemd-coredum Not tainted 6.17.0-rc6 #22 PREEMPT(none) <snip registers, unreliable trace> [ 32.143353] Call Trace: [ 32.143732] ovl_encode_fh+0xd5/0x170 [ 32.144031] exportfs_encode_inode_fh+0x12f/0x300 [ 32.144425] show_mark_fhandle+0xbe/0x1f0 [ 32.145805] inotify_fdinfo+0x226/0x2d0 [ 32.146442] inotify_show_fdinfo+0x1c5/0x350 [ 32.147168] seq_show+0x530/0x6f0 [ 32.147449] seq_read_iter+0x503/0x12a0 [ 32.148419] seq_read+0x31f/0x410 [ 32.150714] vfs_read+0x1f0/0x9e0 [ 32.152297] ksys_read+0x125/0x240 IOW ovl_check_encode_origin derefs inode->i_sb->s_root, after it was set to NULL in the unmount path. Fix it by protecting calling exportfs_encode_fid() from show_mark_fhandle() with s_umount lock. This form of fix was suggested by Amir in [1]. [1]: https://lore.kernel.org/all/CAOQ4uxhbDwhb+2Brs1UdkoF0a3NSdBAOQPNfEHjahrgoKJpLEw@mail.gmail.com/

In the Linux kernel, the following vulnerability has been resolved: PCI/IOV: Fix race between SR-IOV enable/disable and hotplug Commit 05703271c3cd ("PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV") tried to fix a race between the VF removal inside sriov_del_vfs() and concurrent hot unplug by taking the PCI rescan/remove lock in sriov_del_vfs(). Similarly the PCI rescan/remove lock was also taken in sriov_add_vfs() to protect addition of VFs. This approach however causes deadlock on trying to remove PFs with SR-IOV enabled because PFs disable SR-IOV during removal and this removal happens under the PCI rescan/remove lock. So the original fix had to be reverted. Instead of taking the PCI rescan/remove lock in sriov_add_vfs() and sriov_del_vfs(), fix the race that occurs with SR-IOV enable and disable vs hotplug higher up in the callchain by taking the lock in sriov_numvfs_store() before calling into the driver's sriov_configure() callback.

In the Linux kernel, the following vulnerability has been resolved: vfat: fix missing sb_min_blocksize() return value checks When emulating an nvme device on qemu with both logical_block_size and physical_block_size set to 8 KiB, but without format, a kernel panic was triggered during the early boot stage while attempting to mount a vfat filesystem. [95553.682035] EXT4-fs (nvme0n1): unable to set blocksize [95553.684326] EXT4-fs (nvme0n1): unable to set blocksize [95553.686501] EXT4-fs (nvme0n1): unable to set blocksize [95553.696448] ISOFS: unsupported/invalid hardware sector size 8192 [95553.697117] ------------[ cut here ]------------ [95553.697567] kernel BUG at fs/buffer.c:1582! [95553.697984] Oops: invalid opcode: 0000 [#1] SMP NOPTI [95553.698602] CPU: 0 UID: 0 PID: 7212 Comm: mount Kdump: loaded Not tainted 6.18.0-rc2+ #38 PREEMPT(voluntary) [95553.699511] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [95553.700534] RIP: 0010:folio_alloc_buffers+0x1bb/0x1c0 [95553.701018] Code: 48 8b 15 e8 93 18 02 65 48 89 35 e0 93 18 02 48 83 c4 10 5b 41 5c 41 5d 41 5e 41 5f 5d 31 d2 31 c9 31 f6 31 ff c3 cc cc cc cc <0f> 0b 90 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f [95553.702648] RSP: 0018:ffffd1b0c676f990 EFLAGS: 00010246 [95553.703132] RAX: ffff8cfc4176d820 RBX: 0000000000508c48 RCX: 0000000000000001 [95553.703805] RDX: 0000000000002000 RSI: 0000000000000000 RDI: 0000000000000000 [95553.704481] RBP: ffffd1b0c676f9c8 R08: 0000000000000000 R09: 0000000000000000 [95553.705148] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 [95553.705816] R13: 0000000000002000 R14: fffff8bc8257e800 R15: 0000000000000000 [95553.706483] FS: 000072ee77315840(0000) GS:ffff8cfdd2c8d000(0000) knlGS:0000000000000000 [95553.707248] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [95553.707782] CR2: 00007d8f2a9e5a20 CR3: 0000000039d0c006 CR4: 0000000000772ef0 [95553.708439] PKRU: 55555554 [95553.708734] Call Trace: [95553.709015] <TASK> [95553.709266] __getblk_slow+0xd2/0x230 [95553.709641] ? find_get_block_common+0x8b/0x530 [95553.710084] bdev_getblk+0x77/0xa0 [95553.710449] __bread_gfp+0x22/0x140 [95553.710810] fat_fill_super+0x23a/0xfc0 [95553.711216] ? __pfx_setup+0x10/0x10 [95553.711580] ? __pfx_vfat_fill_super+0x10/0x10 [95553.712014] vfat_fill_super+0x15/0x30 [95553.712401] get_tree_bdev_flags+0x141/0x1e0 [95553.712817] get_tree_bdev+0x10/0x20 [95553.713177] vfat_get_tree+0x15/0x20 [95553.713550] vfs_get_tree+0x2a/0x100 [95553.713910] vfs_cmd_create+0x62/0xf0 [95553.714273] __do_sys_fsconfig+0x4e7/0x660 [95553.714669] __x64_sys_fsconfig+0x20/0x40 [95553.715062] x64_sys_call+0x21ee/0x26a0 [95553.715453] do_syscall_64+0x80/0x670 [95553.715816] ? __fs_parse+0x65/0x1e0 [95553.716172] ? fat_parse_param+0x103/0x4b0 [95553.716587] ? vfs_parse_fs_param_source+0x21/0xa0 [95553.717034] ? __do_sys_fsconfig+0x3d9/0x660 [95553.717548] ? __x64_sys_fsconfig+0x20/0x40 [95553.717957] ? x64_sys_call+0x21ee/0x26a0 [95553.718360] ? do_syscall_64+0xb8/0x670 [95553.718734] ? __x64_sys_fsconfig+0x20/0x40 [95553.719141] ? x64_sys_call+0x21ee/0x26a0 [95553.719545] ? do_syscall_64+0xb8/0x670 [95553.719922] ? x64_sys_call+0x1405/0x26a0 [95553.720317] ? do_syscall_64+0xb8/0x670 [95553.720702] ? __x64_sys_close+0x3e/0x90 [95553.721080] ? x64_sys_call+0x1b5e/0x26a0 [95553.721478] ? do_syscall_64+0xb8/0x670 [95553.721841] ? irqentry_exit+0x43/0x50 [95553.722211] ? exc_page_fault+0x90/0x1b0 [95553.722681] entry_SYSCALL_64_after_hwframe+0x76/0x7e [95553.723166] RIP: 0033:0x72ee774f3afe [95553.723562] Code: 73 01 c3 48 8b 0d 0a 33 0f 00 f7 d8 64 89 01 48 83 c8 ff c3 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 49 89 ca b8 af 01 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d da 32 0f 00 f7 d8 64 89 01 48 [95553.725188] RSP: 002b:00007ffe97148978 EFLAGS: 00000246 ORIG_RAX: 00000000000001af [95553.725892] RAX: ffffffffffffffda RBX: ---truncated---

In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix scx_enable() crash on helper kthread creation failure A crash was observed when the sched_ext selftests runner was terminated with Ctrl+\ while test 15 was running: NIP [c00000000028fa58] scx_enable.constprop.0+0x358/0x12b0 LR [c00000000028fa2c] scx_enable.constprop.0+0x32c/0x12b0 Call Trace: scx_enable.constprop.0+0x32c/0x12b0 (unreliable) bpf_struct_ops_link_create+0x18c/0x22c __sys_bpf+0x23f8/0x3044 sys_bpf+0x2c/0x6c system_call_exception+0x124/0x320 system_call_vectored_common+0x15c/0x2ec kthread_run_worker() returns an ERR_PTR() on failure rather than NULL, but the current code in scx_alloc_and_add_sched() only checks for a NULL helper. Incase of failure on SIGQUIT, the error is not handled in scx_alloc_and_add_sched() and scx_enable() ends up dereferencing an error pointer. Error handling is fixed in scx_alloc_and_add_sched() to propagate PTR_ERR() into ret, so that scx_enable() jumps to the existing error path, avoiding random dereference on failure.

In the Linux kernel, the following vulnerability has been resolved: sctp: avoid NULL dereference when chunk data buffer is missing chunk->skb pointer is dereferenced in the if-block where it's supposed to be NULL only. chunk->skb can only be NULL if chunk->head_skb is not. Check for frag_list instead and do it just before replacing chunk->skb. We're sure that otherwise chunk->skb is non-NULL because of outer if() condition.

A stored cross-site scripting (XSS) vulnerability was discovered in Seafile Community Edition prior to version 13.0.12. When Seafile is configured with the Golang file server, an attacker can upload a crafted SVG file containing malicious JavaScript and share it using a public link. Opening the link triggers script execution in the victim's browser. This issue has been fixed in Seafile Community Edition 13.0.12.

open-webui v0.6.33 is vulnerable to Incorrect Access Control. The API /api/tasks/stop/ directly accesses and cancels tasks without verifying user ownership, enabling attackers (a normal user) to stop arbitrary LLM response tasks.

## Summary Authenticated SQL Injection Vulnerability in Endpoint Module Rest API

MCP Server Kubernetes is an MCP Server that can connect to a Kubernetes cluster and manage it. Prior to 2.9.8, there is a security issue exists in the exec_in_pod tool of the mcp-server-kubernetes MCP Server. The tool accepts user-provided commands in both array and string formats. When a string format is provided, it is passed directly to shell interpretation (sh -c) without input validation, allowing shell metacharacters to be interpreted. This vulnerability can be exploited through direct command injection or indirect prompt injection attacks, where AI agents may execute commands without explicit user intent. This vulnerability is fixed in 2.9.8.

LIBPNG is a reference library for use in applications that read, create, and manipulate PNG (Portable Network Graphics) raster image files. Prior to 1.6.52, an out-of-bounds read vulnerability in libpng's simplified API allows reading up to 1012 bytes beyond the png_sRGB_base[512] array when processing valid palette PNG images with partial transparency and gamma correction. The PNG files that trigger this vulnerability are valid per the PNG specification; the bug is in libpng's internal state management. Upgrade to libpng 1.6.52 or later.

Improper validation of source IP addresses in OpenVPN version 2.6.0 through 2.6.15 and 2.7_alpha1 through 2.7_rc1 allows an attacker to open a session from a different IP address which did not initiate the connection resulting in a denial of service for the originating client

Cal.com is open-source scheduling software. Prior to 5.9.8, A flaw in the login credentials provider allows an attacker to bypass password verification when a TOTP code is provided, potentially gaining unauthorized access to user accounts. This issue exists due to problematic conditional logic in the authentication flow. This vulnerability is fixed in 5.9.8.

RomM (ROM Manager) allows users to scan, enrich, browse and play their game collections with a clean and responsive interface. Prior to 4.4.1 and 4.4.1-beta.2, an Authenticated User can delete collections belonging to other users by directly sending a DELETE request to the collection endpoint. No ownership verification is performed before deleting collections. This vulnerability is fixed in 4.4.1 and 4.4.1-beta.2.

RomM (ROM Manager) allows users to scan, enrich, browse and play their game collections with a clean and responsive interface. Prior to 4.4.1 and 4.4.1-beta.2, users can read private collections / smart collections belonging to other users by directly accessing their IDs via API. No ownership verification or checking if the collection is public/private before returning collection data. This vulnerability is fixed in 4.4.1 and 4.4.1-beta.2.

Allocation of Resources Without Limits or Throttling, Improper Validation of Specified Quantity in Input vulnerability in The Qt Company Qt on Windows, MacOS, Linux, iOS, Android, x86, ARM, 64 bit, 32 bit allows Excessive Allocation. This issue affects users of the Text component in Qt Quick. Missing validation of the width and height in the <img> tag could cause an application to become unresponsive. This issue affects Qt: from 5.0.0 through 6.5.10, from 6.6.0 through 6.8.5, from 6.9.0 through 6.10.0.

An excluded subdomain constraint in a certificate chain does not restrict the usage of wildcard SANs in the leaf certificate. For example a constraint that excludes the subdomain test.example.com does not prevent a leaf certificate from claiming the SAN *.example.com.

RomM (ROM Manager) allows users to scan, enrich, browse and play their game collections with a clean and responsive interface. RomM contains multiple unrestricted file upload vulnerabilities that allow authenticated users to upload malicious SVG or HTML files. When these files are accessed the browser executes embedded JavaScript, leading to stored Cross-Site Scripting (XSS) which when combined with a CSRF misconfiguration they lead to achieve full administrative account takeover, creating a rogue admin account, escalating the attacker account role to admin, and much more. This vulnerability is fixed in 4.4.1 and 4.4.1-beta.2.

Rhino is an open-source implementation of JavaScript written entirely in Java. Prior to 1.8.1, 1.7.15.1, and 1.7.14.1, when an application passed an attacker controlled float poing number into the toFixed() function, it might lead to high CPU consumption and a potential Denial of Service. Small numbers go through this call stack: NativeNumber.numTo > DToA.JS_dtostr > DToA.JS_dtoa > DToA.pow5mult where pow5mult attempts to raise 5 to a ridiculous power. This vulnerability is fixed in 1.8.1, 1.7.15.1, and 1.7.14.1.

Coder allows organizations to provision remote development environments via Terraform. Prior to 2.26.5, 2.27.7, and 2.28.4, Workspace Agent manifests containing sensitive values were logged in plaintext unsanitized. An attacker with limited local access to the Coder Workspace (VM, K8s Pod etc.) or a third-party system (SIEM, logging stack) could access those logs. This vulnerability is fixed in 2.26.5, 2.27.7, and 2.28.4.

Step CA is an online certificate authority for secure, automated certificate management for DevOps. Prior to 0.29.0, there is an improper authorization check for SSH certificate revocation. This affects deployments configured with the SSHPOP provisioner. This vulnerability is fixed in 0.29.0.

Side-channel information leakage in Navigation and Loading in Google Chrome prior to 139.0.7258.66 allowed a remote attacker to bypass site isolation via a crafted HTML page. (Chromium security severity: Medium)

Untrusted search path in auth_query connection handler in PgBouncer before 1.25.1 allows an unauthenticated attacker to execute arbitrary SQL during authentication via a malicious search_path parameter in the StartupMessage.

When building nested elements using xml.dom.minidom methods such as appendChild() that have a dependency on _clear_id_cache() the algorithm is quadratic. Availability can be impacted when building excessively nested documents.

DeepChat is a smart assistant uses artificial intelligence. In 0.5.0 and earlier, there is a Stored Cross-Site Scripting (XSS) vulnerability in the Mermaid diagram renderer allows an attacker to execute arbitrary JavaScript within the application context. By leveraging the exposed Electron IPC bridge, this XSS can be escalated to Remote Code Execution (RCE) by registering and starting a malicious MCP (Model Context Protocol) server.

Envoy is a high-performance edge/middle/service proxy. In 1.33.12, 1.34.10, 1.35.6, 1.36.2, and earlier, Envoy’s mTLS certificate matcher for match_typed_subject_alt_names may incorrectly treat certificates containing an embedded null byte (\0) inside an OTHERNAME SAN value as valid matches.

Collabora Online - Built-in CODE Server (richdocumentscode) provides a built-in server with all of the document editing features of Collabora Online. In versions prior to 25.04.702, Collabora Online has a Configuration-Dependent RCE (OS Command Injection) in richdocumentscode proxy. Users of Nextcloud with Collabora Online - Built-in CODE Server app can be vulnerable to attack via proxy.php and an intermediate reverse proxy. This vulnerability is fixed in 25.04.702.

NVIDIA TAO contains a vulnerability where an attacker may cause a resource to be loaded via an uncontrolled search path. A successful exploit of this vulnerability may lead to escalation of privileges, data tampering, denial of service, information disclosure.

Claude Code is an agentic coding tool. Prior to 1.0.93, Due to errors in parsing shell commands related to $IFS and short CLI flags, it was possible to bypass the Claude Code read-only validation and trigger arbitrary code execution. Reliably exploiting this requires the ability to add untrusted content into a Claude Code context window. This vulnerability is fixed in 1.0.93.

NVIDIA Triton Server for Linux contains a vulnerability where an attacker may cause an improper validation of specified quantity in input. A successful exploit of this vulnerability may lead to denial of service.

NVIDIA Triton Inference Server contains a vulnerability where an attacker may cause an improper check for unusual or exceptional conditions issue by sending extra large payloads. A successful exploit of this vulnerability may lead to denial of service.

Envoy is a high-performance edge/middle/service proxy. In 1.33.12, 1.34.10, 1.35.6, 1.36.2, and earlier, when Envoy is configured in TCP proxy mode to handle CONNECT requests, it accepts client data before issuing a 2xx response and forwards that data to the upstream TCP connection. If a forwarding proxy upstream from Envoy then responds with a non-2xx status, this can cause a de-synchronized CONNECT tunnel state. By default Envoy continues to allow early CONNECT data to avoid disrupting existing deployments. The envoy.reloadable_features.reject_early_connect_data runtime flag can be set to reject CONNECT requests that send data before a 2xx response when intermediaries upstream from Envoy may reject establishment of a CONNECT tunnel.

MCP Gateway allows easy and secure running and deployment of MCP servers. In versions 0.27.0 and earlier, when MCP Gateway runs in sse or streaming transport mode, it is vulnerable to DNS rebinding. An attacker who can get a victim to visit a malicious website or be served a malicious advertisement can perform browser-based exploitation of MCP servers executing behind the gateway, including manipulating tools or other features exposed by those MCP servers. MCP Gateway is not affected when running in the default stdio mode, which does not listen on network ports. Version 0.28.0 fixes this issue.

GZDoom is a feature centric port for all Doom engine games. GZDoom is an open source Doom engine. In versions 4.14.2 and earlier, ZScript actor state handling allows scripts to read arbitrary addresses, write constants into the JIT-compiled code section, and redirect control flow through crafted FState and VMFunction structures. A script can copy FState structures into a writable buffer, modify function pointers and state transitions, and cause execution of attacker-controlled bytecode, leading to arbitrary code execution.

In Splunk Enterprise versions below 10.0.1, 9.4.6, 9.3.8, and 9.2.10, and Splunk Cloud Platform versions below 10.1.2507.4, 10.0.2503.7, and 9.3.2411.116, a user who holds a role that contains the high privilege capability `change_authentication` could enumerate internal IP addresses and network ports when adding new search peers to a Splunk search head in a distributed environment.

In Splunk Enterprise versions below 10.0.2, 9.4.6, 9.3.8, and 9.2.10, and versions below 3.9.10, 3.8.58 and 3.7.28 of the Splunk Secure Gateway app on Splunk Cloud Platform, a low-privileged user that does not hold the "admin" or "power" Splunk roles could craft a malicious payload through the `label` column field after adding a new device in the Splunk Secure Gateway app. This could potentially lead to a client-side denial of service (DoS).

In Splunk Universal Forwarder for Windows versions below 10.0.2, 9.4.6, 9.3.8, and 9.2.10, a new installation of or an upgrade to an affected version can result in incorrect permissions assignment in the Universal Forwarder for Windows Installation directory. This lets non-administrator users on the machine access the directory and all its contents.

In Splunk Enterprise versions below 10.0.2, 9.4.6, 9.3.8, and 9.2.10, and below 3.9.10, 3.8.58, and 3.7.28 of Splunk Secure Gateway app in Splunk Cloud Platform, a low-privileged user that does not hold the "admin" or "power" Splunk roles and subscribes to mobile push notifications could receive notifications that disclose the title and description of the report or alert even if they do not have access to view the report or alert.

In Splunk Enterprise versions below 10.0.1, 9.4.6, 9.3.8, and 9.2.10, and Splunk Cloud Platform versions below 10.1.2507.4, 10.0.2503.6, and 9.3.2411.117.125, an unauthenticated attacker can inject American National Standards Institute (ANSI) escape codes into Splunk log files due to improper validation at the /en-US/static/ web endpoint. This may allow them to poison, forge, or obfuscate sensitive log data through specially crafted HTTP requests, potentially impacting log integrity and detection capabilities.

In Splunk Enterprise for Windows versions below 10.0.2, 9.4.6, 9.3.8, and 9.2.10, a new installation of or an upgrade to an affected version can result in incorrect permissions assignment in the Splunk Enterprise for Windows Installation directory. This lets non-administrator users on the machine access the directory and all its contents.

In Splunk Enterprise versions below 10.0.2, 9.4.6, 9.3.8, and 9.2.10, and Splunk Cloud Platform versions below 10.1.2507.6, 10.0.2503.7, and 9.3.2411.117, a user who holds a role with a high privilege capability `admin_all_objects` could craft a malicious payload through the href attribute of an anchor tag within a collection in the navigation bar, which could result in execution of unauthorized JavaScript code in the browser of a user.

In Splunk MCP Server app versions below 0.2.4, a user with access to the "run_splunk_query" Model Context Protocol (MCP) tool could bypass the SPL command allowlist controls in MCP by embedding SPL commands as sub-searches, leading to unauthorized actions beyond the intended MCP restrictions.

In Splunk Enterprise versions below 10.0.2, 9.4.6, 9.3.8, and 9.2.10, and Splunk Cloud Platform versions below 10.1.2507.10, 10.0.2503.8, and 9.3.2411.120, a low-privileged user that does not hold the "admin" or "power" Splunk roles could create a views dashboard with a custom background using the `data:image/png;base64` protocol that could potentially lead to an unvalidated redirect. This behavior circumvents the Splunk external URL warning mechanism by using a specially crafted URL, allowing for a redirection to an external malicious site. The vulnerability requires the attacker to phish the victim by tricking them into initiating a request within their browser. The authenticated user should not be able to exploit the vulnerability at will.

A flaw was found in Undertow that can cause remote denial of service attacks. When the server uses the FormEncodedDataDefinition.doParse(StreamSourceChannel) method to parse large form data encoding with application/x-www-form-urlencoded, the method will cause an OutOfMemory issue. This flaw allows unauthorized users to cause a remote denial of service (DoS) attack.