CVE Feed

Doorkeeper OpenID Connect implements an OpenID Connect authentication provider for Rails applications on top of Doorkeeper. Prior to 1.10.4, the Dynamic Client Registration (DCR) endpoint persists client-supplied scopes without validating them against the server's configured scope set. Under certain conditions, this allows a self-registered client to obtain scopes beyond what the server intended to grant. In DynamicClientRegistrationController#application_params, the scopes attribute is assigned directly from params[:scope] with no validation against Doorkeeper.configuration.scopes or optional_scopes. Combined with enforce_configured_scopes being off by default and Doorkeeper's ScopeChecker prioritizing application-level scopes over server-level scopes, this creates a privilege escalation path. This issue is fixed in version 1.10.4.

Faktory is a language-agnostic background job server. In versions prior to 1.10.0, the server is vulnerable to an unauthenticated denial of service in which a single malformed command crashes the entire process. Its wire protocol is line-based, and several command handlers slice or index the received line at a fixed offset, such as cmd[5:] for PUSH or qs[0] for QUEUE, without checking that a payload is present. Sending a bare verb with no payload, for example PUSH, ACK, FAIL, BEAT, PUSHB, or QUEUE, triggers a Go slice or index out-of-range panic. Because the codebase has no recover() anywhere in the command-dispatch path, an unrecovered panic in a handler goroutine terminates the whole Go process rather than just that connection, instantly disconnecting every other client, worker, and in-flight job. The attack requires only a connection to the command port and completion of the trivial handshake, with no credentials when no password is configured, and can be repeated to keep the service down indefinitely. This issue is fixed in version 1.10.0.

Insufficient Session Expiration vulnerability in Apache Tomcat meant that if the session ID for an authenticated HTTP session was changed after a WebSocket connection had been established under that authenticated HTTP session, the WebSokcet session would not be closed as required by the Jakarta WebSocket specification when the HTTP session ended. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.24, from 10.1.0-M1 through 10.1.57, from 9.0.0.M1 through 9.0.120. The following versions were EOL at the time the CVE was created but are known to be affected: from 8.5.0 through 8.5.100, from 7.0.43 through 7.0.109. Other unsupported versions may also be affected. Users are recommended to upgrade to version 11.0.25, 10.1.58 or 9.0.121, which fix the issue.

Faktory is a language-agnostic background job server. In versions prior to 1.10.0, the embedded Redis bootstrapper is vulnerable to an insecure temporary file flaw that lets a local unprivileged user hijack the Redis configuration and escalate to root. It writes its startup configuration to a fixed, predictable, world-writable path, /tmp/redis.conf, only creating the file if it does not already exist and never validating it on later boots. Because /tmp is world-writable, a local unprivileged user can pre-create /tmp/redis.conf with attacker-chosen Redis directives before Faktory starts, and Faktory will use the planted file verbatim. Faktory only overrides the unixsocket, dir, and logfile options, leaving directives such as bind, protected-mode, requirepass, and loadmodule attacker-controlled. This lets an attacker silently expose the entire job queue over an unauthenticated network port with no visible error to the administrator. Because the official systemd unit runs Faktory, and the redis-server child it spawns, as root, an attacker can also supply a loadmodule directive to execute arbitrary native code in the root-owned Redis process, escalating from a local unprivileged user to root. This issue is fixed in version 1.10.0.

Uncontrolled Resource Consumption vulnerability in Apache Tomcat via an allocation leak in the HTTP/2 backlog tracking when a stream is reset This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.24, from 10.1.0-M1 through 10.1.57, from 9.0.39 through 9.0.120. The following versions were EOL at the time the CVE was created but are known to be affected: from 8.5.59 through 8.5.100. Other unsupported versions may also be affected. Users are recommended to upgrade to version 11.0.25, 10.1.58 or 9.0.121, which fix the issue.

A vulnerability was identified in code-projects Simple Inventory System 1.0. This vulnerability affects unknown code of the file /InventoryManagement/edit.php. The manipulation of the argument ID leads to sql injection. The attack is possible to be carried out remotely. The exploit is publicly available and might be used.

Improper Authentication vulnerability in Apache Tomcat meant that in some circumstances (e.g. CLIENT-CERT, SPNEGO) that a user would be authenticated even if the user did not exist in the DataSourceRealm. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.24, from 10.1.0-M1 through 10.1.57, from 9.0.0.M1 through 9.0.120. The following versions were EOL at the time the CVE was created but are known to be affected: from 8.5.0 through 8.5.100, from 7.0.0 through 7.0.109. Other unsupported versions may also be affected. Users are recommended to upgrade to version 11.0.25, 10.1.58 or 9.0.121, which fix the issue.

Incorrect Authorization vulnerability in Apache Tomcat's FORM authentication process allows the bypassing of a security constraint that limits user has access to a resource POST but not GET. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.24, from 10.1.0-M1 through 10.1.57, from 9.0.0.M1 through 9.0.120. The following versions were EOL at the time the CVE was created but are known to be affected: from 8.5.0 through 8.5.100, from 7.0.0 through 7.0.109. Other unsupported versions may also be affected. Users are recommended to upgrade to version 11.0.25, 10.1.58 or 9.0.121, which fixes the issue.

Improper Authorization vulnerability in Apache Tomcat cause by security-role-ref definitions being incorrectly used as role aliases within the Realm in additional to the correct usage with Request.isUserInRole(). This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.24, from 10.1.0-M1 through 10.1.57, from 9.0.25 through 9.0.120. The following versions were EOL at the time the CVE was created but are known to be affected: from 8.5.46 through 8.5.100, from 7.0.97 through 7.0.109. Other unsupported versions may also be affected. Users are recommended to upgrade to version 11.0.25, 10.1.58 or 9.0.121, which fix the issue.

Off-by-one Error vulnerability in Apache Tomcat impacting the [N] flag on the rewrite valves causes rewrite processing to restart at the second rule rather than the first rule. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.24, from 10.1.0-M1 through 10.1.57, from 9.0.0.M1 through 9.0.120. The following versions were EOL at the time the CVE was created but are known to be affected: from 8.5.0 through 8.5.100. Other unsupported versions may also be affected. Users are recommended to upgrade to version 11.0.25, 10.1.58 or 9.0.121 which fix the issue.

Typebot is an open-source chatbot builder. In self-hosted versions prior to 3.18.0, the server-side Send Email integration block allows arbitrary reading of local files on the server. The block builds Nodemailer attachments from a typebot variable, and its parseAttachments helper returns the supplied value as a filesystem path whenever it does not start with the application's own base URL, instead of requiring an http or https URL. The Nodemailer transport is created without disableFileAccess or disableUrlAccess, both of which default to false, so an attachment specified as an absolute server path is read from the local filesystem and delivered. Because both the attachment value and the recipient list are attacker-controllable typebot variables, any registered user can publish a bot whose Send Email block attaches an absolute path such as /etc/passwd or /proc/self/environ and mails it to an address they control. This enables reading any file the server process can access, including process environment secrets such as the credential encryption key and database connection string, without administrative privileges or victim interaction. Open signup is enabled by default and the system SMTP credential is already configured, so no non-default configuration is required. This issue is fixed in version 3.18.0.

Authentication Bypass by Capture-replay vulnerability in Apache Tomcat's DIGEST authenticator. If, before windowSize requests have been made, a client makes a DIGEST authenticated request with a nonceCount on the upper boundary of the replay window then that request is replayable once only while the associated nonceCount remains within the replay window.   This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.24, from 10.1.0-M1 through 10.1.57, from 9.0.0.M1 through 9.0.120. The following versions were EOL at the time the CVE was created but are known to be affected: from 8.5.0 through 8.5.100, from 7.0.30 through 7.0.109. Other unsupported versions may also be affected. Users are recommended to upgrade to version 11.0.25, 10.1.58 or 9.0.121, which fix the issue.

Improper Input Validation vulnerability in Apache Tomcat due to incomplete fix for CVE-2026-32990. This issue affects Apache Tomcat: from 11.0.20 through 11.0.24, from 10.1.53 through 10.1.57, from 9.0.115 through 9.0.120. Users are recommended to upgrade to version 11.0.25, 10.1.58 or 9.0.121, which fix the issue.

TypeBot is a chatbot builder tool. Prior to 3.18.0, any authenticated non-guest workspace member can remove another workspace's public custom domain and make typebots on that domain unavailable. The custom-domain delete handler in handleDeleteCustomDomain.ts authorizes a caller against a client-supplied workspaceId but sends the client-supplied domain name to the shared Vercel project before verifying that the domain belongs to that workspace. This issue is fixed in version 3.18.0.

Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability in Apache Tomcat when creating unix domain sockets allows an unauthorised local user to access the unix domain socket. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.24, from 10.1.0-M1 through 10.1.57, from 9.0.42 through 9.0.120. Users are recommended to upgrade to version 11.0.25, 10.1.58, 9.0.121, which fixes the issue.

Improper Access Control, Incorrect Authorization vulnerability in Apache Tomcat leads to security constraint bypass if a constraint for a longer path is specified before a more restrictive constraint for a shorter sub-path. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.24, from 10.1.0-M1 through 10.1.57, from 9.0.0.M1 through 9.0.120, from 8.5.0 through 8.5.100, from 7.0.0 through 7.0.109. Users are recommended to upgrade to version 11.0.25, 10.1.58, 9.0.121, which fixes the issue.

Typebot is an open-source chatbot builder. In self-hosted versions up to and including 3.17.1, the default passwordless email magic-link authentication is vulnerable to login-code brute forcing that leads to account takeover. The email provider overrides NextAuth's default cryptographically secure token with a 6-digit code generated using Math.random(), reducing the keyspace to 900,000 with a 10-minute expiry, and the code itself is the raw value placed in the magic link. The verification callback enforces no attempt limit, lockout, or CSRF protection, and an incorrect guess does not consume the real code because the adapter returns null on a not-found token, so a valid code survives unlimited guessing within its lifetime. The only rate limiter applies to the code-sending path and is keyed on the client-controlled X-Forwarded-For header, allowing an attacker to request many concurrent live codes for one victim and further raise the odds of a matching guess. As a result, an anonymous attacker who knows a victim's email address can brute-force the callback and obtain an authenticated session as that user with no victim interaction, gaining full access to the victim's bots, results, and connected integration credentials. Deployments configured for OAuth or SSO only, with no email provider, are not affected. This issue is fixed in version 3.18.0

A vulnerability was found in SililaWijesinghe Food Ordering System up to ba314e897e3365600461e5ea59432e39ceaa0fa5. Affected by this issue is some unknown functionality of the file /search.php. Performing a manipulation of the argument search_box results in sql injection. Remote exploitation of the attack is possible. The exploit has been made public and could be used. This product follows a rolling release approach for continuous delivery, so version details for affected or updated releases are not provided. The vendor was contacted early about this disclosure but did not respond in any way.

Punk::Plugin::TOTP versions before 0.05 for Perl allow the second-factor attempt limit to be reset by replaying an earlier session cookie because the challenge route counts failures in the session. The POST handler on challenge_path keeps the failure count as tries inside the totp_pending record in the session, raising it on each rejected code and deleting the pending record once it reaches attempts, five by default. Punk::Session carries the session in a signed cookie unless the application declares a store, and keeps no server-side record, so an earlier value of the same session stays valid until the expiry stamped inside it. A client that saves the cookie before its failed attempts and presents it again gets the pending record back with its counter, and the limit never fires. The replayed record is accepted while its own expiry, pending_ttl seconds from the challenge and 300 by default, has not passed. Sessions declared with a store are not affected: the pending record and its counter then live server-side. The attempt limit does not bound guessing of the second factor, which is left to the per-address rate limit the plugin registers on the same path, 30 requests per 60 seconds.

Punk::Plugin::TOTP versions before 0.05 for Perl accept another account's recovery code at the two-factor challenge because totp_use_recovery compares user identifiers numerically. The helper searches the recovery model for the submitted code's digest alone, across every user's rows, so the ownership test that follows is the only thing binding a code to the account it was issued to. That test compares the row's user_id with the challenged user's id through Perl's integer coercion, and an identifier with no leading digits coerces to zero, so any two of them compare equal. User models keyed on a username, an email address or a UUID hit that case, and a numeric key compares as intended. The challenge route feeds a submitted value to the helper once TOTP verification fails, so an attacker who knows a victim's password and holds a recovery code of their own passes the victim's second factor.

Velero is an open source tool for backing up, restoring, and migrating Kubernetes cluster resources and persistent volumes. Prior to 1.18.1, an attacker who compromises the backup object-storage backend can upload a malicious backup tarball containing parent-directory paths that escape the extraction directory during restore and overwrite sensitive files in the Velero pod filesystem. This issue is fixed in version 1.18.1.

GitHub CLI (gh) is GitHub's official command line tool. Versions 2.28.0 through 2.97.0 bind the local listener created by gh codespace ports forward to all available network interfaces by default. While port forwarding is active, a service in a Codespace can therefore become reachable through the user's non-loopback local IP addresses by other hosts that can route to the user's machine. This behavior does not change the GitHub-side visibility of the Codespaces port. Instead, it exposes the forwarded service through a wildcard-bound listener on the user's local machine, even when the source Codespaces port remains private. Exploitation requires a network-adjacent attacker to reach the victim's machine while forwarding is active. This issue is fixed in version 2.98.0.

A vulnerability has been found in code-projects Online Shopping System 1.0. Affected by this vulnerability is an unknown functionality of the file /admin/sumit_form.php. Such manipulation of the argument Success leads to cross site scripting. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

Mesop is a Python-based UI framework that allows users to build web applications. Prior to 1.3.3, applications running in debug mode expose a GET /hot-reload endpoint whose unbounded loop depends on the user-supplied counter parameter, allowing an unauthenticated attacker to hold worker threads with high counter values until the worker pool is exhausted and the server becomes unavailable. A single unauthenticated attacker can crash the Mesop server with minimal effort. Because the attack leverages worker exhaustion, the server remains unresponsive until it is manually restarted. This issue is fixed in version 1.3.3.

The MCP PHP SDK (Composer package mcp/sdk) is the official Model Context Protocol SDK for PHP. In versions 0.5.0 through 0.7.0, the HTTP client transport reads a Server-Sent Events response stream incrementally and appends each chunk to an in-memory buffer with no upper bound. The buffer is only flushed when an SSE event delimiter, a double newline, is found, so a remote MCP server that streams response bytes without ever sending the delimiter causes the buffer to grow without limit. A malicious, compromised, or man-in-the-middle-controlled server that the client connects to over the HTTP transport can exploit this to exhaust the client process's memory, triggering a fatal allocation error or OS out-of-memory kill and denying service to the MCP client. The issue affects any client using HttpTransport against an untrusted server endpoint and does not require authentication or user interaction beyond initiating the connection. This issue is fixed in version 0.7.1.

A flaw was found in the file-xwd plugin in GIMP. When processing a specially crafted XWD image file, the plugin validates the image width and bytes-per-line parameters independently rather than ensuring their combined values are consistent with the allocated buffer size. This incorrect validation leads to improper bounds checking, causing a heap out-of-bounds read. This issue can result in an application crash, leading to a denial of service or a limited information disclosure of heap memory contents into the produced image.

ORAS (OCI Registry As Storage) is a CLI and library for managing artifacts in OCI registries. In ORAS CLI versions up to and including 1.3.2, the recursive referrer traversal does not track visited descriptors, so a malicious OCI registry that returns a cyclic referrer graph causes unbounded recursion and memory growth. This affects oras discover, whose recursive traversal is enabled by default because the --depth option defaults to 0 (unlimited), as well as the recursive referrer counting used by the oras backup and oras restore workflows. A cyclic graph can be as simple as A referring to B and B referring back to A. A malicious registry can use this to cause a client-side denial of service, exhausting CPU and memory and hanging automation or CI/CD pipelines that run ORAS against untrusted registry metadata. The vulnerability does not extend to code execution, artifact substitution, or integrity bypass. This issue has been fixed in version 1.3.3.

A flaw has been found in zackees transcribe-anything up to 4.1.0. Affected is the function ytdlp_download of the file src/transcribe_anything/ytldp_download.py of the component Yt-dlp Download. This manipulation of the argument url causes os command injection. The attack may be initiated remotely. The attack's complexity is rated as high. The exploitability is told to be difficult. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet.

DB-GPT builds the destination path for an uploaded skill from the multipart filename without constraining it to the upload directory. skill_upload in packages/dbgpt-app/src/dbgpt_app/openapi/api_v1/agentic_data_api.py takes file.filename as given and writes the request body to upload_dir / filename. A path composed with that operator discards the left operand when the right one is absolute and follows parent references otherwise, so a filename such as ../../../tmp/x or /tmp/x resolves outside the intended directory; nothing canonicalises the result, checks that it remains under the upload root, or prevents a .py suffix. The route's only dependency is get_user_from_headers in dbgpt_serve/utils/auth.py, which returns a request carrying the admin role whether or not a user_id header is supplied, so the endpoint is reachable without credentials. A remote attacker holding no account can therefore write attacker-controlled bytes to any path the server process can write, place a new Python module inside the application package or replace one the application already imports, and obtain code execution in the server process when that module is next imported.

NVIDIA NemoClaw for Linux contains a vulnerability in its inference server setup, where a remote attacker may access the inference service without authentication. A successful exploit of this vulnerability may lead to information disclosure and denial of service.

NVIDIA NemoClaw contains a vulnerability where an attacker could cause invocation of process using visible sensitive information. A successful exploit of this vulnerability might lead to information disclosure.

NVIDIA NemoClaw contains a vulnerability where an attacker could cause insufficiently protected credentials . A successful exploit of this vulnerability might lead to information disclosure and data tampering.

NVIDIA OpenShell for Linux contains a vulnerability in its sandbox exec handler, where an attacker could cause an OS command injection. A successful exploit of this vulnerability might lead to code execution, information disclosure, and data tampering.

NVIDIA OpenShell for Linux contains a vulnerability in its inference proxy, where an attacker could cause an improper encoding or escaping of output. A successful exploit of this vulnerability might lead to information disclosure and data tampering.

NVIDIA NemoClaw for Linux contains a vulnerability in its deployment process, where an attacker could cause improper certificate validation. A successful exploit of this vulnerability might lead to information disclosure, data tampering, code execution, and escalation of privileges.

NVIDIA OpenShell for Linux contains a vulnerability in its sandbox provisioning API, where an attacker could cause an incomplete list of disallowed inputs. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, information disclosure, data tampering, and denial of service.

NVIDIA NemoClaw for Linux contains a vulnerability in its migration command, where a local attacker could cause code injection. A successful exploit of this vulnerability might lead to code execution, data tampering, information disclosure, and denial of service.

NVIDIA NemoClaw for Linux contains a vulnerability in its installation process, where an attacker could cause execution of untrusted code. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, data tampering, information disclosure, and denial of service.

NVIDIA NemoClaw for Linux contains a vulnerability in its status and logs plugin commands, where an attacker could cause OS command injection. A successful exploit of this vulnerability might lead to code execution, data tampering, information disclosure, and denial of service.

NVIDIA NemoClaw for Linux contains a vulnerability in its NIM management component, where an attacker could cause OS command injection. A successful exploit of this vulnerability might lead to code execution, data tampering, information disclosure, and denial of service.

NVIDIA NemoClaw for Linux contains a vulnerability in its command-line interface, where an attacker could cause OS command injection. A successful exploit of this vulnerability might lead to code execution, data tampering, information disclosure, and denial of service.

NVIDIA NemoClaw for Linux contains a vulnerability in its remote-access helper workflow, where an attacker could cause weak authentication. A successful exploit of this vulnerability might lead to code execution, information disclosure, and data tampering.

NVIDIA NemoClaw for Linux contains a vulnerability in its installation scripts, where an attacker could cause a download of code without integrity check. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, information disclosure, and data tampering.

NVIDIA NemoClaw for Linux contains a vulnerability in the Telegram bridge component, where an attacker could cause an OS command injection. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, information disclosure, and data tampering.

NVIDIA OpenShell for Linux contains a vulnerability where an attacker could cause a sandbox escape. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, data tampering, and information disclosure.

NVIDIA OpenShell Sandbox for Linux contains a vulnerability where an attacker could cause a path traversal bypass of L7 REST network policy. A successful exploit of this vulnerability might lead to information disclosure and data tampering.

NVIDIA OpenShell for all platforms contains a vulnerability where a malicious gateway could cause OS command injection. A successful exploit of this vulnerability might lead to code execution, data tampering, and information disclosure.

Use after free in Sync in Google Chrome on on iOS prior to 152.0.7977.65 allowed a remote attacker to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: Low)

Uninitialized resource in Skia in Google Chrome prior to 152.0.7977.65 allowed a remote attacker to potentially read memory inside the sandbox via a crafted HTML page. (Chromium security severity: Low)