CVE Feed

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix key parsing memleak In rxrpc_preparse_xdr_yfs_rxgk(), the memory attached to token->rxgk can be leaked in a few error paths after it's allocated. Fix this by freeing it in the "reject_token:" case.

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix use of wrong skb when comparing queued RESP challenge serial In rxrpc_post_response(), the code should be comparing the challenge serial number from the cached response before deciding to switch to a newer response, but looks at the newer packet private data instead, rendering the comparison always false. Fix this by switching to look at the older packet. Fix further[1] to substitute the new packet in place of the old one if newer and also to release whichever we don't use.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (powerz) Fix use-after-free on USB disconnect After powerz_disconnect() frees the URB and releases the mutex, a subsequent powerz_read() call can acquire the mutex and call powerz_read_data(), which dereferences the freed URB pointer. Fix by: - Setting priv->urb to NULL in powerz_disconnect() so that powerz_read_data() can detect the disconnected state. - Adding a !priv->urb check at the start of powerz_read_data() to return -ENODEV on a disconnected device. - Moving usb_set_intfdata() before hwmon registration so the disconnect handler can always find the priv pointer.

In the Linux kernel, the following vulnerability has been resolved: PM: sleep: Drop spurious WARN_ON() from pm_restore_gfp_mask() Commit 35e4a69b2003f ("PM: sleep: Allow pm_restrict_gfp_mask() stacking") introduced refcount-based GFP mask management that warns when pm_restore_gfp_mask() is called with saved_gfp_count == 0. Some hibernation paths call pm_restore_gfp_mask() defensively where the GFP mask may or may not be restricted depending on the execution path. For example, the uswsusp interface invokes it in SNAPSHOT_CREATE_IMAGE, SNAPSHOT_UNFREEZE, and snapshot_release(). Before the stacking change this was a silent no-op; it now triggers a spurious WARNING. Remove the WARN_ON() wrapper from the !saved_gfp_count check while retaining the check itself, so that defensive calls remain harmless without producing false warnings. [ rjw: Subject tweak ]

In the Linux kernel, the following vulnerability has been resolved: LoongArch: KVM: Fix base address calculation in kvm_eiointc_regs_access() In function kvm_eiointc_regs_access(), the register base address is caculated from array base address plus offset, the offset is absolute value from the base address. The data type of array base address is u64, it should be converted into the "void *" type and then plus the offset.

In the Linux kernel, the following vulnerability has been resolved: LoongArch: Fix missing NULL checks for kstrdup() 1. Replace "of_find_node_by_path("/")" with "of_root" to avoid multiple calls to "of_node_put()". 2. Fix a potential kernel oops during early boot when memory allocation fails while parsing CPU model from device tree.

In the Linux kernel, the following vulnerability has been resolved: futex: Clear stale exiting pointer in futex_lock_pi() retry path Fuzzying/stressing futexes triggered: WARNING: kernel/futex/core.c:825 at wait_for_owner_exiting+0x7a/0x80, CPU#11: futex_lock_pi_s/524 When futex_lock_pi_atomic() sees the owner is exiting, it returns -EBUSY and stores a refcounted task pointer in 'exiting'. After wait_for_owner_exiting() consumes that reference, the local pointer is never reset to nil. Upon a retry, if futex_lock_pi_atomic() returns a different error, the bogus pointer is passed to wait_for_owner_exiting(). CPU0 CPU1 CPU2 futex_lock_pi(uaddr) // acquires the PI futex exit() futex_cleanup_begin() futex_state = EXITING; futex_lock_pi(uaddr) futex_lock_pi_atomic() attach_to_pi_owner() // observes EXITING *exiting = owner; // takes ref return -EBUSY wait_for_owner_exiting(-EBUSY, owner) put_task_struct(); // drops ref // exiting still points to owner goto retry; futex_lock_pi_atomic() lock_pi_update_atomic() cmpxchg(uaddr) *uaddr ^= WAITERS // whatever // value changed return -EAGAIN; wait_for_owner_exiting(-EAGAIN, exiting) // stale WARN_ON_ONCE(exiting) Fix this by resetting upon retry, essentially aligning it with requeue_pi.

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix the descriptor address in __kvm_at_swap_desc() Using "(u64 __user *)hva + offset" to get the virtual addresses of S1/S2 descriptors looks really wrong, if offset is not zero. What we want to get for swapping is hva + offset, not hva + offset*8. ;-) Fix it.

In the Linux kernel, the following vulnerability has been resolved: wifi: wlcore: Return -ENOMEM instead of -EAGAIN if there is not enough headroom Since upstream commit e75665dd0968 ("wifi: wlcore: ensure skb headroom before skb_push"), wl1271_tx_allocate() and with it wl1271_prepare_tx_frame() returns -EAGAIN if pskb_expand_head() fails. However, in wlcore_tx_work_locked(), a return value of -EAGAIN from wl1271_prepare_tx_frame() is interpreted as the aggregation buffer being full. This causes the code to flush the buffer, put the skb back at the head of the queue, and immediately retry the same skb in a tight while loop. Because wlcore_tx_work_locked() holds wl->mutex, and the retry happens immediately with GFP_ATOMIC, this will result in an infinite loop and a CPU soft lockup. Return -ENOMEM instead so the packet is dropped and the loop terminates. The problem was found by an experimental code review agent based on gemini-3.1-pro while reviewing backports into v6.18.y.

In the Linux kernel, the following vulnerability has been resolved: pmdomain: bcm: bcm2835-power: Increase ASB control timeout The bcm2835_asb_control() function uses a tight polling loop to wait for the ASB bridge to acknowledge a request. During intensive workloads, this handshake intermittently fails for V3D's master ASB on BCM2711, resulting in "Failed to disable ASB master for v3d" errors during runtime PM suspend. As a consequence, the failed power-off leaves V3D in a broken state, leading to bus faults or system hangs on later accesses. As the timeout is insufficient in some scenarios, increase the polling timeout from 1us to 5us, which is still negligible in the context of a power domain transition. Also, replace the open-coded ktime_get_ns()/ cpu_relax() polling loop with readl_poll_timeout_atomic().

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix missing runtime PM reference in ccs_mode_store ccs_mode_store() calls xe_gt_reset() which internally invokes xe_pm_runtime_get_noresume(). That function requires the caller to already hold an outer runtime PM reference and warns if none is held: [46.891177] xe 0000:03:00.0: [drm] Missing outer runtime PM protection [46.891178] WARNING: drivers/gpu/drm/xe/xe_pm.c:885 at xe_pm_runtime_get_noresume+0x8b/0xc0 Fix this by protecting xe_gt_reset() with the scope-based guard(xe_pm_runtime)(xe), which is the preferred form when the reference lifetime matches a single scope. v2: - Use scope-based guard(xe_pm_runtime)(xe) (Shuicheng) - Update commit message accordingly (cherry picked from commit 7937ea733f79b3f25e802a0c8360bf7423856f36)

In the Linux kernel, the following vulnerability has been resolved: Input: uinput - fix circular locking dependency with ff-core A lockdep circular locking dependency warning can be triggered reproducibly when using a force-feedback gamepad with uinput (for example, playing ELDEN RING under Wine with a Flydigi Vader 5 controller): ff->mutex -> udev->mutex -> input_mutex -> dev->mutex -> ff->mutex The cycle is caused by four lock acquisition paths: 1. ff upload: input_ff_upload() holds ff->mutex and calls uinput_dev_upload_effect() -> uinput_request_submit() -> uinput_request_send(), which acquires udev->mutex. 2. device create: uinput_ioctl_handler() holds udev->mutex and calls uinput_create_device() -> input_register_device(), which acquires input_mutex. 3. device register: input_register_device() holds input_mutex and calls kbd_connect() -> input_register_handle(), which acquires dev->mutex. 4. evdev release: evdev_release() calls input_flush_device() under dev->mutex, which calls input_ff_flush() acquiring ff->mutex. Fix this by introducing a new state_lock spinlock to protect udev->state and udev->dev access in uinput_request_send() instead of acquiring udev->mutex. The function only needs to atomically check device state and queue an input event into the ring buffer via uinput_dev_event() -- both operations are safe under a spinlock (ktime_get_ts64() and wake_up_interruptible() do not sleep). This breaks the ff->mutex -> udev->mutex link since a spinlock is a leaf in the lock ordering and cannot form cycles with mutexes. To keep state transitions visible to uinput_request_send(), protect writes to udev->state in uinput_create_device() and uinput_destroy_device() with the same state_lock spinlock. Additionally, move init_completion(&request->done) from uinput_request_send() to uinput_request_submit() before uinput_request_reserve_slot(). Once the slot is allocated, uinput_flush_requests() may call complete() on it at any time from the destroy path, so the completion must be initialised before the request becomes visible. Lock ordering after the fix: ff->mutex -> state_lock (spinlock, leaf) udev->mutex -> state_lock (spinlock, leaf) udev->mutex -> input_mutex -> dev->mutex -> ff->mutex (no back-edge)

In the Linux kernel, the following vulnerability has been resolved: i2c: cp2615: fix serial string NULL-deref at probe The cp2615 driver uses the USB device serial string as the i2c adapter name but does not make sure that the string exists. Verify that the device has a serial number before accessing it to avoid triggering a NULL-pointer dereference (e.g. with malicious devices).

In the Linux kernel, the following vulnerability has been resolved: mm/vma: fix memory leak in __mmap_region() commit 605f6586ecf7 ("mm/vma: do not leak memory when .mmap_prepare swaps the file") handled the success path by skipping get_file() via file_doesnt_need_get, but missed the error path. When /dev/zero is mmap'd with MAP_SHARED, mmap_zero_prepare() calls shmem_zero_setup_desc() which allocates a new shmem file to back the mapping. If __mmap_new_vma() subsequently fails, this replacement file is never fput()'d - the original is released by ksys_mmap_pgoff(), but nobody releases the new one. Add fput() for the swapped file in the error path. Reproducible with fault injection. FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 1 CPU: 2 UID: 0 PID: 366 Comm: syz.7.14 Not tainted 7.0.0-rc6 #2 PREEMPT(full) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x164/0x1f0 should_fail_ex+0x525/0x650 should_failslab+0xdf/0x140 kmem_cache_alloc_noprof+0x78/0x630 vm_area_alloc+0x24/0x160 __mmap_region+0xf6b/0x2660 mmap_region+0x2eb/0x3a0 do_mmap+0xc79/0x1240 vm_mmap_pgoff+0x252/0x4c0 ksys_mmap_pgoff+0xf8/0x120 __x64_sys_mmap+0x12a/0x190 do_syscall_64+0xa9/0x580 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak) BUG: memory leak unreferenced object 0xffff8881118aca80 (size 360): comm "syz.7.14", pid 366, jiffies 4294913255 hex dump (first 32 bytes): 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... ff ff ff ff ff ff ff ff c0 28 4d ae ff ff ff ff .........(M..... backtrace (crc db0f53bc): kmem_cache_alloc_noprof+0x3ab/0x630 alloc_empty_file+0x5a/0x1e0 alloc_file_pseudo+0x135/0x220 __shmem_file_setup+0x274/0x420 shmem_zero_setup_desc+0x9c/0x170 mmap_zero_prepare+0x123/0x140 __mmap_region+0xdda/0x2660 mmap_region+0x2eb/0x3a0 do_mmap+0xc79/0x1240 vm_mmap_pgoff+0x252/0x4c0 ksys_mmap_pgoff+0xf8/0x120 __x64_sys_mmap+0x12a/0x190 do_syscall_64+0xa9/0x580 entry_SYSCALL_64_after_hwframe+0x76/0x7e Found by syzkaller.

In the Linux kernel, the following vulnerability has been resolved: net: altera-tse: fix skb leak on DMA mapping error in tse_start_xmit() When dma_map_single() fails in tse_start_xmit(), the function returns NETDEV_TX_OK without freeing the skb. Since NETDEV_TX_OK tells the stack the packet was consumed, the skb is never freed, leaking memory on every DMA mapping failure. Add dev_kfree_skb_any() before returning to properly free the skb.

Cross Site Scripting vulnerability in Hostbill v.2025-11-24 and 2025-12-01 allows a remote attacker to execute arbitrary code

An issue in Hostbill v.2025-11-24 and 2025-12-01 allows a remote attacker to cause a denial of service via the Client Balance component

In the Linux kernel, the following vulnerability has been resolved: NFC: nxp-nci: allow GPIOs to sleep Allow the firmware and enable GPIOs to sleep. This fixes a `WARN_ON' and allows the driver to operate GPIOs which are connected to I2C GPIO expanders. -- >8 -- kernel: WARNING: CPU: 3 PID: 2636 at drivers/gpio/gpiolib.c:3880 gpiod_set_value+0x88/0x98 -- >8 --

In the Linux kernel, the following vulnerability has been resolved: xfs: scrub: unlock dquot before early return in quota scrub xchk_quota_item can return early after calling xchk_fblock_process_error. When that helper returns false, the function returned immediately without dropping dq->q_qlock, which can leave the dquot lock held and risk lock leaks or deadlocks in later quota operations. Fix this by unlocking dq->q_qlock before the early return.

In the Linux kernel, the following vulnerability has been resolved: LoongArch: KVM: Make kvm_get_vcpu_by_cpuid() more robust kvm_get_vcpu_by_cpuid() takes a cpuid parameter whose type is int, so cpuid can be negative. Let kvm_get_vcpu_by_cpuid() return NULL for this case so as to make it more robust. This fix an out-of-bounds access to kvm_arch::phyid_map::phys_map[].

In the Linux kernel, the following vulnerability has been resolved: x86/cpu: Remove X86_CR4_FRED from the CR4 pinned bits mask Commit in Fixes added the FRED CR4 bit to the CR4 pinned bits mask so that whenever something else modifies CR4, that bit remains set. Which in itself is a perfectly fine idea. However, there's an issue when during boot FRED is initialized: first on the BSP and later on the APs. Thus, there's a window in time when exceptions cannot be handled. This becomes particularly nasty when running as SEV-{ES,SNP} or TDX guests which, when they manage to trigger exceptions during that short window described above, triple fault due to FRED MSRs not being set up yet. See Link tag below for a much more detailed explanation of the situation. So, as a result, the commit in that Link URL tried to address this shortcoming by temporarily disabling CR4 pinning when an AP is not online yet. However, that is a problem in itself because in this case, an attack on the kernel needs to only modify the online bit - a single bit in RW memory - and then disable CR4 pinning and then disable SM*P, leading to more and worse things to happen to the system. So, instead, remove the FRED bit from the CR4 pinning mask, thus obviating the need to temporarily disable CR4 pinning. If someone manages to disable FRED when poking at CR4, then idt_invalidate() would make sure the system would crash'n'burn on the first exception triggered, which is a much better outcome security-wise.

In the Linux kernel, the following vulnerability has been resolved: smb: server: avoid double-free in smb_direct_free_sendmsg after smb_direct_flush_send_list() smb_direct_flush_send_list() already calls smb_direct_free_sendmsg(), so we should not call it again after post_sendmsg() moved it to the batch list.

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix leak of rxgk context in rxgk_verify_response() Fix rxgk_verify_response() to clean up the rxgk context it creates.

In the Linux kernel, the following vulnerability has been resolved: mmc: vub300: fix NULL-deref on disconnect Make sure to deregister the controller before dropping the reference to the driver data on disconnect to avoid NULL-pointer dereferences or use-after-free.

In the Linux kernel, the following vulnerability has been resolved: pmdomain: imx8mp-blk-ctrl: Keep the NOC_HDCP clock enabled Keep the NOC_HDCP clock always enabled to fix the potential hang caused by the NoC ADB400 port power down handshake.

In the Linux kernel, the following vulnerability has been resolved: wifi: rt2x00usb: fix devres lifetime USB drivers bind to USB interfaces and any device managed resources should have their lifetime tied to the interface rather than parent USB device. This avoids issues like memory leaks when drivers are unbound without their devices being physically disconnected (e.g. on probe deferral or configuration changes). Fix the USB anchor lifetime so that it is released on driver unbind.

bookserver in KDE Arianna before 26.04.1 allows attackers to read files over a socket connection by guessing a URL.

This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix mechToken leak when SPNEGO decode fails after token alloc The kernel ASN.1 BER decoder calls action callbacks incrementally as it walks the input. When ksmbd_decode_negTokenInit() reaches the mechToken [2] OCTET STRING element, ksmbd_neg_token_alloc() allocates conn->mechToken immediately via kmemdup_nul(). If a later element in the same blob is malformed, then the decoder will return nonzero after the allocation is already live. This could happen if mechListMIC [3] overrunse the enclosing SEQUENCE. decode_negotiation_token() then sets conn->use_spnego = false because both the negTokenInit and negTokenTarg grammars failed. The cleanup at the bottom of smb2_sess_setup() is gated on use_spnego: if (conn->use_spnego && conn->mechToken) { kfree(conn->mechToken); conn->mechToken = NULL; } so the kfree is skipped, causing the mechToken to never be freed. This codepath is reachable pre-authentication, so untrusted clients can cause slow memory leaks on a server without even being properly authenticated. Fix this up by not checking check for use_spnego, as it's not required, so the memory will always be properly freed. At the same time, always free the memory in ksmbd_conn_free() incase some other failure path forgot to free it.

In the Linux kernel, the following vulnerability has been resolved: bcache: fix cached_dev.sb_bio use-after-free and crash In our production environment, we have received multiple crash reports regarding libceph, which have caught our attention: ``` [6888366.280350] Call Trace: [6888366.280452] blk_update_request+0x14e/0x370 [6888366.280561] blk_mq_end_request+0x1a/0x130 [6888366.280671] rbd_img_handle_request+0x1a0/0x1b0 [rbd] [6888366.280792] rbd_obj_handle_request+0x32/0x40 [rbd] [6888366.280903] __complete_request+0x22/0x70 [libceph] [6888366.281032] osd_dispatch+0x15e/0xb40 [libceph] [6888366.281164] ? inet_recvmsg+0x5b/0xd0 [6888366.281272] ? ceph_tcp_recvmsg+0x6f/0xa0 [libceph] [6888366.281405] ceph_con_process_message+0x79/0x140 [libceph] [6888366.281534] ceph_con_v1_try_read+0x5d7/0xf30 [libceph] [6888366.281661] ceph_con_workfn+0x329/0x680 [libceph] ``` After analyzing the coredump file, we found that the address of dc->sb_bio has been freed. We know that cached_dev is only freed when it is stopped. Since sb_bio is a part of struct cached_dev, rather than an alloc every time. If the device is stopped while writing to the superblock, the released address will be accessed at endio. This patch hopes to wait for sb_write to complete in cached_dev_free. It should be noted that we analyzed the cause of the problem, then tell all details to the QWEN and adopted the modifications it made.

In the Linux kernel, the following vulnerability has been resolved: fbdev: udlfb: avoid divide-by-zero on FBIOPUT_VSCREENINFO Much like commit 19f953e74356 ("fbdev: fb_pm2fb: Avoid potential divide by zero error"), we also need to prevent that same crash from happening in the udlfb driver as it uses pixclock directly when dividing, which will crash.

In the Linux kernel, the following vulnerability has been resolved: smb: server: let send_done handle a completion without IB_SEND_SIGNALED With smbdirect_send_batch processing we likely have requests without IB_SEND_SIGNALED, which will be destroyed in the final request that has IB_SEND_SIGNALED set. If the connection is broken all requests are signaled even without explicit IB_SEND_SIGNALED.

In the Linux kernel, the following vulnerability has been resolved: futex: Require sys_futex_requeue() to have identical flags Nicholas reported that his LLM found it was possible to create a UaF when sys_futex_requeue() is used with different flags. The initial motivation for allowing different flags was the variable sized futex, but since that hasn't been merged (yet), simply mandate the flags are identical, as is the case for the old style sys_futex() requeue operations.

In the Linux kernel, the following vulnerability has been resolved: LoongArch: KVM: Handle the case that EIOINTC's coremap is empty EIOINTC's coremap in eiointc_update_sw_coremap() can be empty, currently we get a cpuid with -1 in this case, but we actually need 0 because it's similar as the case that cpuid >= 4. This fix an out-of-bounds access to kvm_arch::phyid_map::phys_map[].

In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: fix use-after-free in encoder release path The fops_vcodec_release() function frees the context structure (ctx) without first cancelling any pending or running work in ctx->encode_work. This creates a race window where the workqueue handler (mtk_venc_worker) may still be accessing the context memory after it has been freed. Race condition: CPU 0 (release path) CPU 1 (workqueue) --------------------- ------------------ fops_vcodec_release() v4l2_m2m_ctx_release() v4l2_m2m_cancel_job() // waits for m2m job "done" mtk_venc_worker() v4l2_m2m_job_finish() // m2m job "done" // BUT worker still running! // post-job_finish access: other ctx dereferences // UAF if ctx already freed // returns (job "done") kfree(ctx) // ctx freed Root cause: The v4l2_m2m_ctx_release() only waits for the m2m job lifecycle (via TRANS_RUNNING flag), not the workqueue lifecycle. After v4l2_m2m_job_finish() is called, the m2m framework considers the job complete and v4l2_m2m_ctx_release() returns, but the worker function continues executing and may still access ctx. The work is queued during encode operations via: queue_work(ctx->dev->encode_workqueue, &ctx->encode_work) The worker function accesses ctx->m2m_ctx, ctx->dev, and other ctx fields even after calling v4l2_m2m_job_finish(). This vulnerability was confirmed with KASAN by running an instrumented test module that widens the post-job_finish race window. KASAN detected: BUG: KASAN: slab-use-after-free in mtk_venc_worker+0x159/0x180 Read of size 4 at addr ffff88800326e000 by task kworker/u8:0/12 Workqueue: mtk_vcodec_enc_wq mtk_venc_worker Allocated by task 47: __kasan_kmalloc+0x7f/0x90 fops_vcodec_open+0x85/0x1a0 Freed by task 47: __kasan_slab_free+0x43/0x70 kfree+0xee/0x3a0 fops_vcodec_release+0xb7/0x190 Fix this by calling cancel_work_sync(&ctx->encode_work) before kfree(ctx). This ensures the workqueue handler is both cancelled (if pending) and synchronized (waits for any running handler to complete) before the context is freed. Placement rationale: The fix is placed after v4l2_ctrl_handler_free() and before list_del_init(&ctx->list). At this point, all m2m operations are done (v4l2_m2m_ctx_release() has returned), and we need to ensure the workqueue is synchronized before removing ctx from the list and freeing it. Note: The open error path does NOT need cancel_work_sync() because INIT_WORK() only initializes the work structure - it does not schedule it. Work is only scheduled later during device_run() operations.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix use-after-free in ocfs2_fault() when VM_FAULT_RETRY filemap_fault() may drop the mmap_lock before returning VM_FAULT_RETRY, as documented in mm/filemap.c: "If our return value has VM_FAULT_RETRY set, it's because the mmap_lock may be dropped before doing I/O or by lock_folio_maybe_drop_mmap()." When this happens, a concurrent munmap() can call remove_vma() and free the vm_area_struct via RCU. The saved 'vma' pointer in ocfs2_fault() then becomes a dangling pointer, and the subsequent trace_ocfs2_fault() call dereferences it -- a use-after-free. Fix this by saving ip_blkno as a plain integer before calling filemap_fault(), and removing vma from the trace event. Since ip_blkno is copied by value before the lock can be dropped, it remains valid regardless of what happens to the vma or inode afterward.

In the Linux kernel, the following vulnerability has been resolved: ALSA: ctxfi: Limit PTP to a single page Commit 391e69143d0a increased CT_PTP_NUM from 1 to 4 to support 256 playback streams, but the additional pages are not used by the card correctly. The CT20K2 hardware already has multiple VMEM_PTPAL registers, but using them separately would require refactoring the entire virtual memory allocation logic. ct_vm_map() always uses PTEs in vm->ptp[0].area regardless of CT_PTP_NUM. On AMD64 systems, a single PTP covers 512 PTEs (2M). When aggregate memory allocations exceed this limit, ct_vm_map() tries to access beyond the allocated space and causes a page fault: BUG: unable to handle page fault for address: ffffd4ae8a10a000 Oops: Oops: 0002 [#1] SMP PTI RIP: 0010:ct_vm_map+0x17c/0x280 [snd_ctxfi] Call Trace: atc_pcm_playback_prepare+0x225/0x3b0 ct_pcm_playback_prepare+0x38/0x60 snd_pcm_do_prepare+0x2f/0x50 snd_pcm_action_single+0x36/0x90 snd_pcm_action_nonatomic+0xbf/0xd0 snd_pcm_ioctl+0x28/0x40 __x64_sys_ioctl+0x97/0xe0 do_syscall_64+0x81/0x610 entry_SYSCALL_64_after_hwframe+0x76/0x7e Revert CT_PTP_NUM to 1. The 256 SRC_RESOURCE_NUM and playback_count remain unchanged.

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: initialize le_tmp64 in rtw_BIP_verify() Initialize le_tmp64 to zero in rtw_BIP_verify() to prevent using uninitialized data. Smatch warns that only 6 bytes are copied to this 8-byte (u64) variable, leaving the last two bytes uninitialized: drivers/staging/rtl8723bs/core/rtw_security.c:1308 rtw_BIP_verify() warn: not copying enough bytes for '&le_tmp64' (8 vs 6 bytes) Initializing the variable at the start of the function fixes this warning and ensures predictable behavior.

A vulnerability in SenseLive X3050's web management interface allows critical system and network configuration parameters to be modified without sufficient validation and safety controls. Due to inadequate enforcement of constraints on sensitive functions, parameters such as IP addressing, watchdog timers, reconnect intervals, and service ports can be set to unsupported or unsafe values. These configuration changes directly affect core device behaviour and recovery mechanisms. The lack of proper validation and safeguards allows critical system functions to be altered in a manner that can destabilize device operation or render the device persistently unavailable.

melange allows users to build apk packages using declarative pipelines. Starting in version 0.32.0 and prior to version 0.43.4, an attacker who can influence a melange configuration file — for example through pull-request-driven CI or build-as-a-service scenarios — could set `pipeline[].uses` to a value containing `../` sequences or an absolute path. The `(*Compiled).compilePipeline` function in `pkg/build/compile.go` passed `uses` directly to `filepath.Join(pipelineDir, uses + ".yaml")` without validating the value, so the resolved path could escape each `--pipeline-dir` and read an arbitrary YAML-parseable file visible to the melange process. Because the loaded file is subsequently interpreted as a melange pipeline and its `runs:` block is executed via `/bin/sh -c` in the build sandbox, this additionally allowed shell commands sourced from an out-of-tree file to run during the build, bypassing the review boundary that normally covers the in-tree pipeline definition. The issue is fixed in melange v0.43.4 via commit 5829ca4. The fix rejects `uses` values that are absolute paths or contain `..`, and verifies (via `filepath.Rel` after `filepath.Clean`) that the resolved target remains within the pipeline directory. As a workaround, only run `melange build` against configuration files from trusted sources. In CI systems that build user-supplied melange configs, gate builds behind manual review of `pipeline[].uses` values and reject any containing `..` or leading `/`.

A vulnerability exists in SenseLive X3050’s web management interface due to its reliance on unencrypted HTTP for all administrative communication. Because management traffic, including authentication attempts and configuration data, is transmitted in cleartext, an attacker with access to the same network segment could intercept or observe sensitive operational information.

A vulnerability exists in SenseLive X3050's web management interface that allows critical configuration parameters to be modified without sufficient authentication or server-side validation. By applying unsupported or disruptive values to recovery mechanisms and network settings, an attacker can induce a persistent lockout state. Because the device lacks a physical reset button, recovery requires specialized technical access via the console to perform a factory reset, resulting in a total denial-of-service for the gateway and its connected RS-485 downstream systems.

A vulnerability exists in SenseLive X3050’s web management interface in which password updates are not reliably applied due to improper handling of credential changes on the backend. After the device undergoes a factory restore using the SenseLive Config 2.0 tool, the interface may indicate that the password update was successful; however, the system may continue to accept the previous or default credentials, demonstrating that the password-change process is not consistently enforced. Even after a factory reset, attempted password changes may fail to propagate correctly.

A vulnerability in SenseLive X3050’s web management interface allows authentication logic to be performed entirely on the client side, relying on hardcoded values within browser-executed scripts rather than server-side verification. An attacker with access to the login page could retrieve these exposed parameters and gain unauthorized access to administrative functionality.

A vulnerability exists in SenseLive X3050’s web management interface due to improper session lifetime enforcement, allowing authenticated sessions to remain active for extended periods without requiring re-authentication. An attacker with access to a previously authenticated session could continue interacting with administrative functions long after legitimate user activity has ceased.

A vulnerability in  SenseLive X3050’s web management interface allows unauthorized access to certain configuration endpoints due to improper access control enforcement. An attacker with network access to the device may be able to bypass the intended authentication mechanism and directly interact with sensitive configuration functions.

A vulnerability in the browser-based remote management interface may allow an administrator to access sensitive information on the device via crafted requests, affecting certain production printers and office/small office multifunction printers.

In versions <8.4.0, <8.3.2, <8.2.2, <8.1.3, <8.0.4, <7.13.6, <7.12.7, <7.11.7, and <7.10.10, the endpoints /api/apps/logs and /api/apps/:id/logs have a typo in the required permission check, allowing authenticated users without the proper permissions to read apps-engine logs.

OpenClaw before 2026.3.28 contains an SSRF guard bypass vulnerability that fails to block four IPv6 special-use ranges. Attackers can exploit this by crafting URLs targeting internal or non-routable IPv6 addresses to bypass SSRF protections.

OpenClaw before 2026.4.2 contains an approval integrity vulnerability in pnpm dlx that fails to bind local script operands consistently with pnpm exec flows. Attackers can replace approved local scripts before execution without invalidating the approval plan, allowing execution of modified script contents.