CVE Feed

In the Linux kernel, the following vulnerability has been resolved: gpio: sifive: Fix refcount leak in sifive_gpio_probe of_irq_find_parent() returns a node pointer with refcount incremented, We should use of_node_put() on it when not needed anymore. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: reject auth/assoc to AP with our address If the AP uses our own address as its MLD address or BSSID, then clearly something's wrong. Reject such connections so we don't try and fail later.

In the Linux kernel, the following vulnerability has been resolved: drm/i915: Make intel_get_crtc_new_encoder() less oopsy The point of the WARN was to print something, not oops straight up. Currently that is precisely what happens if we can't find the connector for the crtc in the atomic state. Get the dev pointer from the atomic state instead of the potentially NULL encoder to avoid that. (cherry picked from commit 3b6692357f70498f617ea1b31a0378070a0acf1c)

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix memory leak in WMI firmware stats Memory allocated for firmware pdev, vdev and beacon statistics are not released during rmmod. Fix it by calling ath11k_fw_stats_free() function before hardware unregister. While at it, avoid calling ath11k_fw_stats_free() while processing the firmware stats received in the WMI event because the local list is getting spliced and reinitialised and hence there are no elements in the list after splicing. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1

In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: mcs: Fix NULL pointer dereferences When system is rebooted after creating macsec interface below NULL pointer dereference crashes occurred. This patch fixes those crashes by using correct order of teardown [ 3324.406942] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 3324.415726] Mem abort info: [ 3324.418510] ESR = 0x96000006 [ 3324.421557] EC = 0x25: DABT (current EL), IL = 32 bits [ 3324.426865] SET = 0, FnV = 0 [ 3324.429913] EA = 0, S1PTW = 0 [ 3324.433047] Data abort info: [ 3324.435921] ISV = 0, ISS = 0x00000006 [ 3324.439748] CM = 0, WnR = 0 .... [ 3324.575915] Call trace: [ 3324.578353] cn10k_mdo_del_secy+0x24/0x180 [ 3324.582440] macsec_common_dellink+0xec/0x120 [ 3324.586788] macsec_notify+0x17c/0x1c0 [ 3324.590529] raw_notifier_call_chain+0x50/0x70 [ 3324.594965] call_netdevice_notifiers_info+0x34/0x7c [ 3324.599921] rollback_registered_many+0x354/0x5bc [ 3324.604616] unregister_netdevice_queue+0x88/0x10c [ 3324.609399] unregister_netdev+0x20/0x30 [ 3324.613313] otx2_remove+0x8c/0x310 [ 3324.616794] pci_device_shutdown+0x30/0x70 [ 3324.620882] device_shutdown+0x11c/0x204 [ 966.664930] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 966.673712] Mem abort info: [ 966.676497] ESR = 0x96000006 [ 966.679543] EC = 0x25: DABT (current EL), IL = 32 bits [ 966.684848] SET = 0, FnV = 0 [ 966.687895] EA = 0, S1PTW = 0 [ 966.691028] Data abort info: [ 966.693900] ISV = 0, ISS = 0x00000006 [ 966.697729] CM = 0, WnR = 0 [ 966.833467] Call trace: [ 966.835904] cn10k_mdo_stop+0x20/0xa0 [ 966.839557] macsec_dev_stop+0xe8/0x11c [ 966.843384] __dev_close_many+0xbc/0x140 [ 966.847298] dev_close_many+0x84/0x120 [ 966.851039] rollback_registered_many+0x114/0x5bc [ 966.855735] unregister_netdevice_many.part.0+0x14/0xa0 [ 966.860952] unregister_netdevice_many+0x18/0x24 [ 966.865560] macsec_notify+0x1ac/0x1c0 [ 966.869303] raw_notifier_call_chain+0x50/0x70 [ 966.873738] call_netdevice_notifiers_info+0x34/0x7c [ 966.878694] rollback_registered_many+0x354/0x5bc [ 966.883390] unregister_netdevice_queue+0x88/0x10c [ 966.888173] unregister_netdev+0x20/0x30 [ 966.892090] otx2_remove+0x8c/0x310 [ 966.895571] pci_device_shutdown+0x30/0x70 [ 966.899660] device_shutdown+0x11c/0x204 [ 966.903574] __do_sys_reboot+0x208/0x290 [ 966.907487] __arm64_sys_reboot+0x20/0x30 [ 966.911489] el0_svc_handler+0x80/0x1c0 [ 966.915316] el0_svc+0x8/0x180 [ 966.918362] Code: f9400000 f9400a64 91220014 f94b3403 (f9400060) [ 966.924448] ---[ end trace 341778e799c3d8d7 ]---

In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: don't leak memory if dev_set_name() fails When dev_set_name() fails, zcdn_create() doesn't free the newly allocated resources. Do it.

In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Fix pci device refcount leak in ppr_notifier() As comment of pci_get_domain_bus_and_slot() says, it returns a pci device with refcount increment, when finish using it, the caller must decrement the reference count by calling pci_dev_put(). So call it before returning from ppr_notifier() to avoid refcount leak.

In fetchmail before 6.5.6, the SMTP client can crash when authenticating upon receiving a 334 status code in a malformed context.

In the Linux kernel, the following vulnerability has been resolved: net: rfkill: gpio: Fix crash due to dereferencering uninitialized pointer Since commit 7d5e9737efda ("net: rfkill: gpio: get the name and type from device property") rfkill_find_type() gets called with the possibly uninitialized "const char *type_name;" local variable. On x86 systems when rfkill-gpio binds to a "BCM4752" or "LNV4752" acpi_device, the rfkill->type is set based on the ACPI acpi_device_id: rfkill->type = (unsigned)id->driver_data; and there is no "type" property so device_property_read_string() will fail and leave type_name uninitialized, leading to a potential crash. rfkill_find_type() does accept a NULL pointer, fix the potential crash by initializing type_name to NULL. Note likely sofar this has not been caught because: 1. Not many x86 machines actually have a "BCM4752"/"LNV4752" acpi_device 2. The stack happened to contain NULL where type_name is stored

In the Linux kernel, the following vulnerability has been resolved: ASoC: codec: sma1307: Fix memory corruption in sma1307_setting_loaded() The sma1307->set.header_size is how many integers are in the header (there are 8 of them) but instead of allocating space of 8 integers we allocate 8 bytes. This leads to memory corruption when we copy data it on the next line: memcpy(sma1307->set.header, data, sma1307->set.header_size * sizeof(int)); Also since we're immediately copying over the memory in ->set.header, there is no need to zero it in the allocator. Use devm_kmalloc_array() to allocate the memory instead.

In the Linux kernel, the following vulnerability has been resolved: drm: bridge: anx7625: Fix NULL pointer dereference with early IRQ If the interrupt occurs before resource initialization is complete, the interrupt handler/worker may access uninitialized data such as the I2C tcpc_client device, potentially leading to NULL pointer dereference.

This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

In the Linux kernel, the following vulnerability has been resolved: jfs: fix invalid free of JFS_IP(ipimap)->i_imap in diUnmount syzbot found an invalid-free in diUnmount: BUG: KASAN: double-free in slab_free mm/slub.c:3661 [inline] BUG: KASAN: double-free in __kmem_cache_free+0x71/0x110 mm/slub.c:3674 Free of addr ffff88806f410000 by task syz-executor131/3632 CPU: 0 PID: 3632 Comm: syz-executor131 Not tainted 6.1.0-rc7-syzkaller-00012-gca57f02295f1 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106 print_address_description+0x74/0x340 mm/kasan/report.c:284 print_report+0x107/0x1f0 mm/kasan/report.c:395 kasan_report_invalid_free+0xac/0xd0 mm/kasan/report.c:460 ____kasan_slab_free+0xfb/0x120 kasan_slab_free include/linux/kasan.h:177 [inline] slab_free_hook mm/slub.c:1724 [inline] slab_free_freelist_hook+0x12e/0x1a0 mm/slub.c:1750 slab_free mm/slub.c:3661 [inline] __kmem_cache_free+0x71/0x110 mm/slub.c:3674 diUnmount+0xef/0x100 fs/jfs/jfs_imap.c:195 jfs_umount+0x108/0x370 fs/jfs/jfs_umount.c:63 jfs_put_super+0x86/0x190 fs/jfs/super.c:194 generic_shutdown_super+0x130/0x310 fs/super.c:492 kill_block_super+0x79/0xd0 fs/super.c:1428 deactivate_locked_super+0xa7/0xf0 fs/super.c:332 cleanup_mnt+0x494/0x520 fs/namespace.c:1186 task_work_run+0x243/0x300 kernel/task_work.c:179 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0x664/0x2070 kernel/exit.c:820 do_group_exit+0x1fd/0x2b0 kernel/exit.c:950 __do_sys_exit_group kernel/exit.c:961 [inline] __se_sys_exit_group kernel/exit.c:959 [inline] __x64_sys_exit_group+0x3b/0x40 kernel/exit.c:959 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd [...] JFS_IP(ipimap)->i_imap is not setting to NULL after free in diUnmount. If jfs_remount() free JFS_IP(ipimap)->i_imap but then failed at diMount(). JFS_IP(ipimap)->i_imap will be freed once again. Fix this problem by setting JFS_IP(ipimap)->i_imap to NULL after free.

In the Linux kernel, the following vulnerability has been resolved: dax: Fix dax_mapping_release() use after free A CONFIG_DEBUG_KOBJECT_RELEASE test of removing a device-dax region provider (like modprobe -r dax_hmem) yields: kobject: 'mapping0' (ffff93eb460e8800): kobject_release, parent 0000000000000000 (delayed 2000) [..] DEBUG_LOCKS_WARN_ON(1) WARNING: CPU: 23 PID: 282 at kernel/locking/lockdep.c:232 __lock_acquire+0x9fc/0x2260 [..] RIP: 0010:__lock_acquire+0x9fc/0x2260 [..] Call Trace: <TASK> [..] lock_acquire+0xd4/0x2c0 ? ida_free+0x62/0x130 _raw_spin_lock_irqsave+0x47/0x70 ? ida_free+0x62/0x130 ida_free+0x62/0x130 dax_mapping_release+0x1f/0x30 device_release+0x36/0x90 kobject_delayed_cleanup+0x46/0x150 Due to attempting ida_free() on an ida object that has already been freed. Devices typically only hold a reference on their parent while registered. If a child needs a parent object to complete its release it needs to hold a reference that it drops from its release callback. Arrange for a dax_mapping to pin its parent dev_dax instance until dax_mapping_release().

In the Linux kernel, the following vulnerability has been resolved: scsi: Revert "scsi: core: Do not increase scsi_device's iorequest_cnt if dispatch failed" The "atomic_inc(&cmd->device->iorequest_cnt)" in scsi_queue_rq() would cause kernel panic because cmd->device may be freed after returning from scsi_dispatch_cmd(). This reverts commit cfee29ffb45b1c9798011b19d454637d1b0fe87d.

In the Linux kernel, the following vulnerability has been resolved: dm integrity: call kmem_cache_destroy() in dm_integrity_init() error path Otherwise the journal_io_cache will leak if dm_register_target() fails.

In the Linux kernel, the following vulnerability has been resolved: bonding: do not assume skb mac_header is set Drivers must not assume in their ndo_start_xmit() that skbs have their mac_header set. skb->data is all what is needed. bonding seems to be one of the last offender as caught by syzbot: WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 skb_mac_offset include/linux/skbuff.h:2913 [inline] WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 bond_xmit_hash drivers/net/bonding/bond_main.c:4170 [inline] WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 bond_xmit_3ad_xor_slave_get drivers/net/bonding/bond_main.c:5149 [inline] WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 bond_3ad_xor_xmit drivers/net/bonding/bond_main.c:5186 [inline] WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 __bond_start_xmit drivers/net/bonding/bond_main.c:5442 [inline] WARNING: CPU: 1 PID: 12155 at include/linux/skbuff.h:2907 bond_start_xmit+0x14ab/0x19d0 drivers/net/bonding/bond_main.c:5470 Modules linked in: CPU: 1 PID: 12155 Comm: syz-executor.3 Not tainted 6.1.30-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023 RIP: 0010:skb_mac_header include/linux/skbuff.h:2907 [inline] RIP: 0010:skb_mac_offset include/linux/skbuff.h:2913 [inline] RIP: 0010:bond_xmit_hash drivers/net/bonding/bond_main.c:4170 [inline] RIP: 0010:bond_xmit_3ad_xor_slave_get drivers/net/bonding/bond_main.c:5149 [inline] RIP: 0010:bond_3ad_xor_xmit drivers/net/bonding/bond_main.c:5186 [inline] RIP: 0010:__bond_start_xmit drivers/net/bonding/bond_main.c:5442 [inline] RIP: 0010:bond_start_xmit+0x14ab/0x19d0 drivers/net/bonding/bond_main.c:5470 Code: 8b 7c 24 30 e8 76 dd 1a 01 48 85 c0 74 0d 48 89 c3 e8 29 67 2e fe e9 15 ef ff ff e8 1f 67 2e fe e9 10 ef ff ff e8 15 67 2e fe <0f> 0b e9 45 f8 ff ff e8 09 67 2e fe e9 dc fa ff ff e8 ff 66 2e fe RSP: 0018:ffffc90002fff6e0 EFLAGS: 00010283 RAX: ffffffff835874db RBX: 000000000000ffff RCX: 0000000000040000 RDX: ffffc90004dcf000 RSI: 00000000000000b5 RDI: 00000000000000b6 RBP: ffffc90002fff8b8 R08: ffffffff83586d16 R09: ffffffff83586584 R10: 0000000000000007 R11: ffff8881599fc780 R12: ffff88811b6a7b7e R13: 1ffff110236d4f6f R14: ffff88811b6a7ac0 R15: 1ffff110236d4f76 FS: 00007f2e9eb47700(0000) GS:ffff8881f6b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b2e421000 CR3: 000000010e6d4000 CR4: 00000000003526e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> [<ffffffff8471a49f>] netdev_start_xmit include/linux/netdevice.h:4925 [inline] [<ffffffff8471a49f>] __dev_direct_xmit+0x4ef/0x850 net/core/dev.c:4380 [<ffffffff851d845b>] dev_direct_xmit include/linux/netdevice.h:3043 [inline] [<ffffffff851d845b>] packet_direct_xmit+0x18b/0x300 net/packet/af_packet.c:284 [<ffffffff851c7472>] packet_snd net/packet/af_packet.c:3112 [inline] [<ffffffff851c7472>] packet_sendmsg+0x4a22/0x64d0 net/packet/af_packet.c:3143 [<ffffffff8467a4b2>] sock_sendmsg_nosec net/socket.c:716 [inline] [<ffffffff8467a4b2>] sock_sendmsg net/socket.c:736 [inline] [<ffffffff8467a4b2>] __sys_sendto+0x472/0x5f0 net/socket.c:2139 [<ffffffff8467a715>] __do_sys_sendto net/socket.c:2151 [inline] [<ffffffff8467a715>] __se_sys_sendto net/socket.c:2147 [inline] [<ffffffff8467a715>] __x64_sys_sendto+0xe5/0x100 net/socket.c:2147 [<ffffffff8553071f>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff8553071f>] do_syscall_64+0x2f/0x50 arch/x86/entry/common.c:80 [<ffffffff85600087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd

In the Linux kernel, the following vulnerability has been resolved: bpf: reject unhashed sockets in bpf_sk_assign The semantics for bpf_sk_assign are as follows: sk = some_lookup_func() bpf_sk_assign(skb, sk) bpf_sk_release(sk) That is, the sk is not consumed by bpf_sk_assign. The function therefore needs to make sure that sk lives long enough to be consumed from __inet_lookup_skb. The path through the stack for a TCPv4 packet is roughly: netif_receive_skb_core: takes RCU read lock __netif_receive_skb_core: sch_handle_ingress: tcf_classify: bpf_sk_assign() deliver_ptype_list_skb: deliver_skb: ip_packet_type->func == ip_rcv: ip_rcv_core: ip_rcv_finish_core: dst_input: ip_local_deliver: ip_local_deliver_finish: ip_protocol_deliver_rcu: tcp_v4_rcv: __inet_lookup_skb: skb_steal_sock The existing helper takes advantage of the fact that everything happens in the same RCU critical section: for sockets with SOCK_RCU_FREE set bpf_sk_assign never takes a reference. skb_steal_sock then checks SOCK_RCU_FREE again and does sock_put if necessary. This approach assumes that SOCK_RCU_FREE is never set on a sk between bpf_sk_assign and skb_steal_sock, but this invariant is violated by unhashed UDP sockets. A new UDP socket is created in TCP_CLOSE state but without SOCK_RCU_FREE set. That flag is only added in udp_lib_get_port() which happens when a socket is bound. When bpf_sk_assign was added it wasn't possible to access unhashed UDP sockets from BPF, so this wasn't a problem. This changed in commit 0c48eefae712 ("sock_map: Lift socket state restriction for datagram sockets"), but the helper wasn't adjusted accordingly. The following sequence of events will therefore lead to a refcount leak: 1. Add socket(AF_INET, SOCK_DGRAM) to a sockmap. 2. Pull socket out of sockmap and bpf_sk_assign it. Since SOCK_RCU_FREE is not set we increment the refcount. 3. bind() or connect() the socket, setting SOCK_RCU_FREE. 4. skb_steal_sock will now set refcounted = false due to SOCK_RCU_FREE. 5. tcp_v4_rcv() skips sock_put(). Fix the problem by rejecting unhashed sockets in bpf_sk_assign(). This matches the behaviour of __inet_lookup_skb which is ultimately the goal of bpf_sk_assign().

In the Linux kernel, the following vulnerability has been resolved: gpio: mvebu: fix irq domain leak Uwe Kleine-König pointed out we still have one resource leak in the mvebu driver triggered on driver detach. Let's address it with a custom devm action.

In the Linux kernel, the following vulnerability has been resolved: rcu-tasks: Avoid pr_info() with spin lock in cblist_init_generic() pr_info() is called with rtp->cbs_gbl_lock spin lock locked. Because pr_info() calls printk() that might sleep, this will result in BUG like below: [ 0.206455] cblist_init_generic: Setting adjustable number of callback queues. [ 0.206463] [ 0.206464] ============================= [ 0.206464] [ BUG: Invalid wait context ] [ 0.206465] 5.19.0-00428-g9de1f9c8ca51 #5 Not tainted [ 0.206466] ----------------------------- [ 0.206466] swapper/0/1 is trying to lock: [ 0.206467] ffffffffa0167a58 (&port_lock_key){....}-{3:3}, at: serial8250_console_write+0x327/0x4a0 [ 0.206473] other info that might help us debug this: [ 0.206473] context-{5:5} [ 0.206474] 3 locks held by swapper/0/1: [ 0.206474] #0: ffffffff9eb597e0 (rcu_tasks.cbs_gbl_lock){....}-{2:2}, at: cblist_init_generic.constprop.0+0x14/0x1f0 [ 0.206478] #1: ffffffff9eb579c0 (console_lock){+.+.}-{0:0}, at: _printk+0x63/0x7e [ 0.206482] #2: ffffffff9ea77780 (console_owner){....}-{0:0}, at: console_emit_next_record.constprop.0+0x111/0x330 [ 0.206485] stack backtrace: [ 0.206486] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.19.0-00428-g9de1f9c8ca51 #5 [ 0.206488] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014 [ 0.206489] Call Trace: [ 0.206490] <TASK> [ 0.206491] dump_stack_lvl+0x6a/0x9f [ 0.206493] __lock_acquire.cold+0x2d7/0x2fe [ 0.206496] ? stack_trace_save+0x46/0x70 [ 0.206497] lock_acquire+0xd1/0x2f0 [ 0.206499] ? serial8250_console_write+0x327/0x4a0 [ 0.206500] ? __lock_acquire+0x5c7/0x2720 [ 0.206502] _raw_spin_lock_irqsave+0x3d/0x90 [ 0.206504] ? serial8250_console_write+0x327/0x4a0 [ 0.206506] serial8250_console_write+0x327/0x4a0 [ 0.206508] console_emit_next_record.constprop.0+0x180/0x330 [ 0.206511] console_unlock+0xf7/0x1f0 [ 0.206512] vprintk_emit+0xf7/0x330 [ 0.206514] _printk+0x63/0x7e [ 0.206516] cblist_init_generic.constprop.0.cold+0x24/0x32 [ 0.206518] rcu_init_tasks_generic+0x5/0xd9 [ 0.206522] kernel_init_freeable+0x15b/0x2a2 [ 0.206523] ? rest_init+0x160/0x160 [ 0.206526] kernel_init+0x11/0x120 [ 0.206527] ret_from_fork+0x1f/0x30 [ 0.206530] </TASK> [ 0.207018] cblist_init_generic: Setting shift to 1 and lim to 1. This patch moves pr_info() so that it is called without rtp->cbs_gbl_lock locked.

In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: initialize damo_filter->list from damos_new_filter() damos_new_filter() is not initializing the list field of newly allocated filter object. However, DAMON sysfs interface and DAMON_RECLAIM are not initializing it after calling damos_new_filter(). As a result, accessing uninitialized memory is possible. Actually, adding multiple DAMOS filters via DAMON sysfs interface caused NULL pointer dereferencing. Initialize the field just after the allocation from damos_new_filter().

In the Linux kernel, the following vulnerability has been resolved: HID: hyperv: avoid struct memcpy overrun warning A previous patch addressed the fortified memcpy warning for most builds, but I still see this one with gcc-9: In file included from include/linux/string.h:254, from drivers/hid/hid-hyperv.c:8: In function 'fortify_memcpy_chk', inlined from 'mousevsc_on_receive' at drivers/hid/hid-hyperv.c:272:3: include/linux/fortify-string.h:583:4: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning] 583 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ My guess is that the WARN_ON() itself is what confuses gcc, so it no longer sees that there is a correct range check. Rework the code in a way that helps readability and avoids the warning.

In the Linux kernel, the following vulnerability has been resolved: cpufreq: davinci: Fix clk use after free The remove function first frees the clks and only then calls cpufreq_unregister_driver(). If one of the cpufreq callbacks is called just before cpufreq_unregister_driver() is run, the freed clks might be used.

In the Linux kernel, the following vulnerability has been resolved: drbd: only clone bio if we have a backing device Commit c347a787e34cb (drbd: set ->bi_bdev in drbd_req_new) moved a bio_set_dev call (which has since been removed) to "earlier", from drbd_request_prepare to drbd_req_new. The problem is that this accesses device->ldev->backing_bdev, which is not NULL-checked at this point. When we don't have an ldev (i.e. when the DRBD device is diskless), this leads to a null pointer deref. So, only allocate the private_bio if we actually have a disk. This is also a small optimization, since we don't clone the bio to only to immediately free it again in the diskless case.

In the Linux kernel, the following vulnerability has been resolved: netdevsim: fix memory leak in nsim_drv_probe() when nsim_dev_resources_register() failed If some items in nsim_dev_resources_register() fail, memory leak will occur. The following is the memory leak information. unreferenced object 0xffff888074c02600 (size 128): comm "echo", pid 8159, jiffies 4294945184 (age 493.530s) hex dump (first 32 bytes): 40 47 ea 89 ff ff ff ff 01 00 00 00 00 00 00 00 @G.............. ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ backtrace: [<0000000011a31c98>] kmalloc_trace+0x22/0x60 [<0000000027384c69>] devl_resource_register+0x144/0x4e0 [<00000000a16db248>] nsim_drv_probe+0x37a/0x1260 [<000000007d1f448c>] really_probe+0x20b/0xb10 [<00000000c416848a>] __driver_probe_device+0x1b3/0x4a0 [<00000000077e0351>] driver_probe_device+0x49/0x140 [<0000000054f2465a>] __device_attach_driver+0x18c/0x2a0 [<000000008538f359>] bus_for_each_drv+0x151/0x1d0 [<0000000038e09747>] __device_attach+0x1c9/0x4e0 [<00000000dd86e533>] bus_probe_device+0x1d5/0x280 [<00000000839bea35>] device_add+0xae0/0x1cb0 [<000000009c2abf46>] new_device_store+0x3b6/0x5f0 [<00000000fb823d7f>] bus_attr_store+0x72/0xa0 [<000000007acc4295>] sysfs_kf_write+0x106/0x160 [<000000005f50cb4d>] kernfs_fop_write_iter+0x3a8/0x5a0 [<0000000075eb41bf>] vfs_write+0x8f0/0xc80

In the Linux kernel, the following vulnerability has been resolved: dm cache: Fix UAF in destroy() Dm_cache also has the same UAF problem when dm_resume() and dm_destroy() are concurrent. Therefore, cancelling timer again in destroy().

In the Linux kernel, the following vulnerability has been resolved: coresight: cti: Fix hang in cti_disable_hw() cti_enable_hw() and cti_disable_hw() are called from an atomic context so shouldn't use runtime PM because it can result in a sleep when communicating with firmware. Since commit 3c6656337852 ("Revert "firmware: arm_scmi: Add clock management to the SCMI power domain""), this causes a hang on Juno when running the Perf Coresight tests or running this command: perf record -e cs_etm//u -- ls This was also missed until the revert commit because pm_runtime_put() was called with the wrong device until commit 692c9a499b28 ("coresight: cti: Correct the parameter for pm_runtime_put") With lock and scheduler debugging enabled the following is output: coresight cti_sys0: cti_enable_hw -- dev:cti_sys0 parent: 20020000.cti BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1151 in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 330, name: perf-exec preempt_count: 2, expected: 0 RCU nest depth: 0, expected: 0 INFO: lockdep is turned off. irq event stamp: 0 hardirqs last enabled at (0): [<0000000000000000>] 0x0 hardirqs last disabled at (0): [<ffff80000822b394>] copy_process+0xa0c/0x1948 softirqs last enabled at (0): [<ffff80000822b394>] copy_process+0xa0c/0x1948 softirqs last disabled at (0): [<0000000000000000>] 0x0 CPU: 3 PID: 330 Comm: perf-exec Not tainted 6.0.0-00053-g042116d99298 #7 Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Sep 13 2022 Call trace: dump_backtrace+0x134/0x140 show_stack+0x20/0x58 dump_stack_lvl+0x8c/0xb8 dump_stack+0x18/0x34 __might_resched+0x180/0x228 __might_sleep+0x50/0x88 __pm_runtime_resume+0xac/0xb0 cti_enable+0x44/0x120 coresight_control_assoc_ectdev+0xc0/0x150 coresight_enable_path+0xb4/0x288 etm_event_start+0x138/0x170 etm_event_add+0x48/0x70 event_sched_in.isra.122+0xb4/0x280 merge_sched_in+0x1fc/0x3d0 visit_groups_merge.constprop.137+0x16c/0x4b0 ctx_sched_in+0x114/0x1f0 perf_event_sched_in+0x60/0x90 ctx_resched+0x68/0xb0 perf_event_exec+0x138/0x508 begin_new_exec+0x52c/0xd40 load_elf_binary+0x6b8/0x17d0 bprm_execve+0x360/0x7f8 do_execveat_common.isra.47+0x218/0x238 __arm64_sys_execve+0x48/0x60 invoke_syscall+0x4c/0x110 el0_svc_common.constprop.4+0xfc/0x120 do_el0_svc+0x34/0xc0 el0_svc+0x40/0x98 el0t_64_sync_handler+0x98/0xc0 el0t_64_sync+0x170/0x174 Fix the issue by removing the runtime PM calls completely. They are not needed here because it must have already been done when building the path for a trace. [ Fix build warnings ]

In the Linux kernel, the following vulnerability has been resolved: drm/amd: fix potential memory leak This patch fix potential memory leak (clk_src) when function run into last return NULL. s/free/kfree/ - Alex

In the Linux kernel, the following vulnerability has been resolved: bpf, cpumap: Make sure kthread is running before map update returns The following warning was reported when running stress-mode enabled xdp_redirect_cpu with some RT threads: ------------[ cut here ]------------ WARNING: CPU: 4 PID: 65 at kernel/bpf/cpumap.c:135 CPU: 4 PID: 65 Comm: kworker/4:1 Not tainted 6.5.0-rc2+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Workqueue: events cpu_map_kthread_stop RIP: 0010:put_cpu_map_entry+0xda/0x220 ...... Call Trace: <TASK> ? show_regs+0x65/0x70 ? __warn+0xa5/0x240 ...... ? put_cpu_map_entry+0xda/0x220 cpu_map_kthread_stop+0x41/0x60 process_one_work+0x6b0/0xb80 worker_thread+0x96/0x720 kthread+0x1a5/0x1f0 ret_from_fork+0x3a/0x70 ret_from_fork_asm+0x1b/0x30 </TASK> The root cause is the same as commit 436901649731 ("bpf: cpumap: Fix memory leak in cpu_map_update_elem"). The kthread is stopped prematurely by kthread_stop() in cpu_map_kthread_stop(), and kthread() doesn't call cpu_map_kthread_run() at all but XDP program has already queued some frames or skbs into ptr_ring. So when __cpu_map_ring_cleanup() checks the ptr_ring, it will find it was not emptied and report a warning. An alternative fix is to use __cpu_map_ring_cleanup() to drop these pending frames or skbs when kthread_stop() returns -EINTR, but it may confuse the user, because these frames or skbs have been handled correctly by XDP program. So instead of dropping these frames or skbs, just make sure the per-cpu kthread is running before __cpu_map_entry_alloc() returns. After apply the fix, the error handle for kthread_stop() will be unnecessary because it will always return 0, so just remove it.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: delete timer and free skb queue when unloading Fix possible crash and memory leak on driver unload by deleting TX purge timer and freeing C2H queue in 'rtw_core_deinit()', shrink critical section in the latter by freeing COEX queue out of TX report lock scope.

In the Linux kernel, the following vulnerability has been resolved: clk: rs9: Fix suspend/resume Disabling the cache in commit 2ff4ba9e3702 ("clk: rs9: Fix I2C accessors") without removing cache synchronization in resume path results in a kernel panic as map->cache_ops is unset, due to REGCACHE_NONE. Enable flat cache again to support resume again. num_reg_defaults_raw is necessary to read the cache defaults from hardware. Some registers are strapped in hardware and cannot be provided in software.

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: Check for probe() id argument being NULL The probe() id argument may be NULL in 2 scenarios: 1. brcmf_pcie_pm_leave_D3() calling brcmf_pcie_probe() to reprobe the device. 2. If a user tries to manually bind the driver from sysfs then the sdio / pcie / usb probe() function gets called with NULL as id argument. 1. Is being hit by users causing the following oops on resume and causing wifi to stop working: BUG: kernel NULL pointer dereference, address: 0000000000000018 <snip> Hardware name: Dell Inc. XPS 13 9350/0PWNCR, BIDS 1.13.0 02/10/2020 Workgueue: events_unbound async_run_entry_fn RIP: 0010:brcmf_pcie_probe+Ox16b/0x7a0 [brcmfmac] <snip> Call Trace: <TASK> brcmf_pcie_pm_leave_D3+0xc5/8x1a0 [brcmfmac be3b4cefca451e190fa35be8f00db1bbec293887] ? pci_pm_resume+0x5b/0xf0 ? pci_legacy_resume+0x80/0x80 dpm_run_callback+0x47/0x150 device_resume+0xa2/0x1f0 async_resume+0x1d/0x30 <snip> Fix this by checking for id being NULL. In the PCI and USB cases try a manual lookup of the id so that manually binding the driver through sysfs and more importantly brcmf_pcie_probe() on resume will work. For the SDIO case there is no helper to do a manual sdio_device_id lookup, so just directly error out on a NULL id there.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix defrag path triggering jbd2 ASSERT code path: ocfs2_ioctl_move_extents ocfs2_move_extents ocfs2_defrag_extent __ocfs2_move_extent + ocfs2_journal_access_di + ocfs2_split_extent //sub-paths call jbd2_journal_restart + ocfs2_journal_dirty //crash by jbs2 ASSERT crash stacks: PID: 11297 TASK: ffff974a676dcd00 CPU: 67 COMMAND: "defragfs.ocfs2" #0 [ffffb25d8dad3900] machine_kexec at ffffffff8386fe01 #1 [ffffb25d8dad3958] __crash_kexec at ffffffff8395959d #2 [ffffb25d8dad3a20] crash_kexec at ffffffff8395a45d #3 [ffffb25d8dad3a38] oops_end at ffffffff83836d3f #4 [ffffb25d8dad3a58] do_trap at ffffffff83833205 #5 [ffffb25d8dad3aa0] do_invalid_op at ffffffff83833aa6 #6 [ffffb25d8dad3ac0] invalid_op at ffffffff84200d18 [exception RIP: jbd2_journal_dirty_metadata+0x2ba] RIP: ffffffffc09ca54a RSP: ffffb25d8dad3b70 RFLAGS: 00010207 RAX: 0000000000000000 RBX: ffff9706eedc5248 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffff97337029ea28 RDI: ffff9706eedc5250 RBP: ffff9703c3520200 R8: 000000000f46b0b2 R9: 0000000000000000 R10: 0000000000000001 R11: 00000001000000fe R12: ffff97337029ea28 R13: 0000000000000000 R14: ffff9703de59bf60 R15: ffff9706eedc5250 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffffb25d8dad3ba8] ocfs2_journal_dirty at ffffffffc137fb95 [ocfs2] #8 [ffffb25d8dad3be8] __ocfs2_move_extent at ffffffffc139a950 [ocfs2] #9 [ffffb25d8dad3c80] ocfs2_defrag_extent at ffffffffc139b2d2 [ocfs2] Analysis This bug has the same root cause of 'commit 7f27ec978b0e ("ocfs2: call ocfs2_journal_access_di() before ocfs2_journal_dirty() in ocfs2_write_end_nolock()")'. For this bug, jbd2_journal_restart() is called by ocfs2_split_extent() during defragmenting. How to fix For ocfs2_split_extent() can handle journal operations totally by itself. Caller doesn't need to call journal access/dirty pair, and caller only needs to call journal start/stop pair. The fix method is to remove journal access/dirty from __ocfs2_move_extent(). The discussion for this patch: https://oss.oracle.com/pipermail/ocfs2-devel/2023-February/000647.html

In the Linux kernel, the following vulnerability has been resolved: cpufreq: amd-pstate-ut: Fix kernel panic when loading the driver After loading the amd-pstate-ut driver, amd_pstate_ut_check_perf() and amd_pstate_ut_check_freq() use cpufreq_cpu_get() to get the policy of the CPU and mark it as busy. In these functions, cpufreq_cpu_put() should be used to release the policy, but it is not, so any other entity trying to access the policy is blocked indefinitely. One such scenario is when amd_pstate mode is changed, leading to the following splat: [ 1332.103727] INFO: task bash:2929 blocked for more than 120 seconds. [ 1332.110001] Not tainted 6.5.0-rc2-amd-pstate-ut #5 [ 1332.115315] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1332.123140] task:bash state:D stack:0 pid:2929 ppid:2873 flags:0x00004006 [ 1332.123143] Call Trace: [ 1332.123145] <TASK> [ 1332.123148] __schedule+0x3c1/0x16a0 [ 1332.123154] ? _raw_read_lock_irqsave+0x2d/0x70 [ 1332.123157] schedule+0x6f/0x110 [ 1332.123160] schedule_timeout+0x14f/0x160 [ 1332.123162] ? preempt_count_add+0x86/0xd0 [ 1332.123165] __wait_for_common+0x92/0x190 [ 1332.123168] ? __pfx_schedule_timeout+0x10/0x10 [ 1332.123170] wait_for_completion+0x28/0x30 [ 1332.123173] cpufreq_policy_put_kobj+0x4d/0x90 [ 1332.123177] cpufreq_policy_free+0x157/0x1d0 [ 1332.123178] ? preempt_count_add+0x58/0xd0 [ 1332.123180] cpufreq_remove_dev+0xb6/0x100 [ 1332.123182] subsys_interface_unregister+0x114/0x120 [ 1332.123185] ? preempt_count_add+0x58/0xd0 [ 1332.123187] ? __pfx_amd_pstate_change_driver_mode+0x10/0x10 [ 1332.123190] cpufreq_unregister_driver+0x3b/0xd0 [ 1332.123192] amd_pstate_change_driver_mode+0x1e/0x50 [ 1332.123194] store_status+0xe9/0x180 [ 1332.123197] dev_attr_store+0x1b/0x30 [ 1332.123199] sysfs_kf_write+0x42/0x50 [ 1332.123202] kernfs_fop_write_iter+0x143/0x1d0 [ 1332.123204] vfs_write+0x2df/0x400 [ 1332.123208] ksys_write+0x6b/0xf0 [ 1332.123210] __x64_sys_write+0x1d/0x30 [ 1332.123213] do_syscall_64+0x60/0x90 [ 1332.123216] ? fpregs_assert_state_consistent+0x2e/0x50 [ 1332.123219] ? exit_to_user_mode_prepare+0x49/0x1a0 [ 1332.123223] ? irqentry_exit_to_user_mode+0xd/0x20 [ 1332.123225] ? irqentry_exit+0x3f/0x50 [ 1332.123226] ? exc_page_fault+0x8e/0x190 [ 1332.123228] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 1332.123232] RIP: 0033:0x7fa74c514a37 [ 1332.123234] RSP: 002b:00007ffe31dd0788 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 1332.123238] RAX: ffffffffffffffda RBX: 0000000000000008 RCX: 00007fa74c514a37 [ 1332.123239] RDX: 0000000000000008 RSI: 000055e27c447aa0 RDI: 0000000000000001 [ 1332.123241] RBP: 000055e27c447aa0 R08: 00007fa74c5d1460 R09: 000000007fffffff [ 1332.123242] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000008 [ 1332.123244] R13: 00007fa74c61a780 R14: 00007fa74c616600 R15: 00007fa74c615a00 [ 1332.123247] </TASK> Fix this by calling cpufreq_cpu_put() wherever necessary. [ rjw: Subject and changelog edits ]

In the Linux kernel, the following vulnerability has been resolved: drm/msm: fix vram leak on bind errors Make sure to release the VRAM buffer also in a case a subcomponent fails to bind. Patchwork: https://patchwork.freedesktop.org/patch/525094/

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: DR, fix memory leak in mlx5dr_cmd_create_reformat_ctx when mlx5_cmd_exec failed in mlx5dr_cmd_create_reformat_ctx, the memory pointed by 'in' is not released, which will cause memory leak. Move memory release after mlx5_cmd_exec.

In the Linux kernel, the following vulnerability has been resolved: vdpa: Add max vqp attr to vdpa_nl_policy for nlattr length check The vdpa_nl_policy structure is used to validate the nlattr when parsing the incoming nlmsg. It will ensure the attribute being described produces a valid nlattr pointer in info->attrs before entering into each handler in vdpa_nl_ops. That is to say, the missing part in vdpa_nl_policy may lead to illegal nlattr after parsing, which could lead to OOB read just like CVE-2023-3773. This patch adds the missing nla_policy for vdpa max vqp attr to avoid such bugs.

In the Linux kernel, the following vulnerability has been resolved: cxl: fix possible null-ptr-deref in cxl_guest_init_afu|adapter() If device_register() fails in cxl_register_afu|adapter(), the device is not added, device_unregister() can not be called in the error path, otherwise it will cause a null-ptr-deref because of removing not added device. As comment of device_register() says, it should use put_device() to give up the reference in the error path. So split device_unregister() into device_del() and put_device(), then goes to put dev when register fails.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix shift-out-of-bounds/overflow in nilfs_sb2_bad_offset() Patch series "nilfs2: fix UBSAN shift-out-of-bounds warnings on mount time". The first patch fixes a bug reported by syzbot, and the second one fixes the remaining bug of the same kind. Although they are triggered by the same super block data anomaly, I divided it into the above two because the details of the issues and how to fix it are different. Both are required to eliminate the shift-out-of-bounds issues at mount time. This patch (of 2): If the block size exponent information written in an on-disk superblock is corrupted, nilfs_sb2_bad_offset helper function can trigger shift-out-of-bounds warning followed by a kernel panic (if panic_on_warn is set): shift exponent 38983 is too large for 64-bit type 'unsigned long long' Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:151 [inline] __ubsan_handle_shift_out_of_bounds+0x33d/0x3b0 lib/ubsan.c:322 nilfs_sb2_bad_offset fs/nilfs2/the_nilfs.c:449 [inline] nilfs_load_super_block+0xdf5/0xe00 fs/nilfs2/the_nilfs.c:523 init_nilfs+0xb7/0x7d0 fs/nilfs2/the_nilfs.c:577 nilfs_fill_super+0xb1/0x5d0 fs/nilfs2/super.c:1047 nilfs_mount+0x613/0x9b0 fs/nilfs2/super.c:1317 ... In addition, since nilfs_sb2_bad_offset() performs multiplication without considering the upper bound, the computation may overflow if the disk layout parameters are not normal. This fixes these issues by inserting preliminary sanity checks for those parameters and by converting the comparison from one involving multiplication and left bit-shifting to one using division and right bit-shifting.

In the Linux kernel, the following vulnerability has been resolved: macintosh: fix possible memory leak in macio_add_one_device() Afer commit 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array"), the name of device is allocated dynamically. It needs to be freed when of_device_register() fails. Call put_device() to give up the reference that's taken in device_initialize(), so that it can be freed in kobject_cleanup() when the refcount hits 0. macio device is freed in macio_release_dev(), so the kfree() can be removed.

In the Linux kernel, the following vulnerability has been resolved: cgroup: split cgroup_destroy_wq into 3 workqueues A hung task can occur during [1] LTP cgroup testing when repeatedly mounting/unmounting perf_event and net_prio controllers with systemd.unified_cgroup_hierarchy=1. The hang manifests in cgroup_lock_and_drain_offline() during root destruction. Related case: cgroup_fj_function_perf_event cgroup_fj_function.sh perf_event cgroup_fj_function_net_prio cgroup_fj_function.sh net_prio Call Trace: cgroup_lock_and_drain_offline+0x14c/0x1e8 cgroup_destroy_root+0x3c/0x2c0 css_free_rwork_fn+0x248/0x338 process_one_work+0x16c/0x3b8 worker_thread+0x22c/0x3b0 kthread+0xec/0x100 ret_from_fork+0x10/0x20 Root Cause: CPU0 CPU1 mount perf_event umount net_prio cgroup1_get_tree cgroup_kill_sb rebind_subsystems // root destruction enqueues // cgroup_destroy_wq // kill all perf_event css // one perf_event css A is dying // css A offline enqueues cgroup_destroy_wq // root destruction will be executed first css_free_rwork_fn cgroup_destroy_root cgroup_lock_and_drain_offline // some perf descendants are dying // cgroup_destroy_wq max_active = 1 // waiting for css A to die Problem scenario: 1. CPU0 mounts perf_event (rebind_subsystems) 2. CPU1 unmounts net_prio (cgroup_kill_sb), queuing root destruction work 3. A dying perf_event CSS gets queued for offline after root destruction 4. Root destruction waits for offline completion, but offline work is blocked behind root destruction in cgroup_destroy_wq (max_active=1) Solution: Split cgroup_destroy_wq into three dedicated workqueues: cgroup_offline_wq – Handles CSS offline operations cgroup_release_wq – Manages resource release cgroup_free_wq – Performs final memory deallocation This separation eliminates blocking in the CSS free path while waiting for offline operations to complete. [1] https://github.com/linux-test-project/ltp/blob/master/runtest/controllers

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Harden uplink netdev access against device unbind The function mlx5_uplink_netdev_get() gets the uplink netdevice pointer from mdev->mlx5e_res.uplink_netdev. However, the netdevice can be removed and its pointer cleared when unbound from the mlx5_core.eth driver. This results in a NULL pointer, causing a kernel panic. BUG: unable to handle page fault for address: 0000000000001300 at RIP: 0010:mlx5e_vport_rep_load+0x22a/0x270 [mlx5_core] Call Trace: <TASK> mlx5_esw_offloads_rep_load+0x68/0xe0 [mlx5_core] esw_offloads_enable+0x593/0x910 [mlx5_core] mlx5_eswitch_enable_locked+0x341/0x420 [mlx5_core] mlx5_devlink_eswitch_mode_set+0x17e/0x3a0 [mlx5_core] devlink_nl_eswitch_set_doit+0x60/0xd0 genl_family_rcv_msg_doit+0xe0/0x130 genl_rcv_msg+0x183/0x290 netlink_rcv_skb+0x4b/0xf0 genl_rcv+0x24/0x40 netlink_unicast+0x255/0x380 netlink_sendmsg+0x1f3/0x420 __sock_sendmsg+0x38/0x60 __sys_sendto+0x119/0x180 do_syscall_64+0x53/0x1d0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Ensure the pointer is valid before use by checking it for NULL. If it is valid, immediately call netdev_hold() to take a reference, and preventing the netdevice from being freed while it is in use.

In the Linux kernel, the following vulnerability has been resolved: block, bfq: fix possible uaf for 'bfqq->bic' Our test report a uaf for 'bfqq->bic' in 5.10: ================================================================== BUG: KASAN: use-after-free in bfq_select_queue+0x378/0xa30 CPU: 6 PID: 2318352 Comm: fsstress Kdump: loaded Not tainted 5.10.0-60.18.0.50.h602.kasan.eulerosv2r11.x86_64 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-20220320_160524-szxrtosci10000 04/01/2014 Call Trace: bfq_select_queue+0x378/0xa30 bfq_dispatch_request+0xe8/0x130 blk_mq_do_dispatch_sched+0x62/0xb0 __blk_mq_sched_dispatch_requests+0x215/0x2a0 blk_mq_sched_dispatch_requests+0x8f/0xd0 __blk_mq_run_hw_queue+0x98/0x180 __blk_mq_delay_run_hw_queue+0x22b/0x240 blk_mq_run_hw_queue+0xe3/0x190 blk_mq_sched_insert_requests+0x107/0x200 blk_mq_flush_plug_list+0x26e/0x3c0 blk_finish_plug+0x63/0x90 __iomap_dio_rw+0x7b5/0x910 iomap_dio_rw+0x36/0x80 ext4_dio_read_iter+0x146/0x190 [ext4] ext4_file_read_iter+0x1e2/0x230 [ext4] new_sync_read+0x29f/0x400 vfs_read+0x24e/0x2d0 ksys_read+0xd5/0x1b0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x61/0xc6 Commit 3bc5e683c67d ("bfq: Split shared queues on move between cgroups") changes that move process to a new cgroup will allocate a new bfqq to use, however, the old bfqq and new bfqq can point to the same bic: 1) Initial state, two process with io in the same cgroup. Process 1 Process 2 (BIC1) (BIC2) | Λ | Λ | | | | V | V | bfqq1 bfqq2 2) bfqq1 is merged to bfqq2. Process 1 Process 2 (BIC1) (BIC2) | | \-------------\| V bfqq1 bfqq2(coop) 3) Process 1 exit, then issue new io(denoce IOA) from Process 2. (BIC2) | Λ | | V | bfqq2(coop) 4) Before IOA is completed, move Process 2 to another cgroup and issue io. Process 2 (BIC2) Λ |\--------------\ | V bfqq2 bfqq3 Now that BIC2 points to bfqq3, while bfqq2 and bfqq3 both point to BIC2. If all the requests are completed, and Process 2 exit, BIC2 will be freed while there is no guarantee that bfqq2 will be freed before BIC2. Fix the problem by clearing bfqq->bic while bfqq is detached from bic.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_serial: Add null pointer check in gserial_resume Consider a case where gserial_disconnect has already cleared gser->ioport. And if a wakeup interrupt triggers afterwards, gserial_resume gets called, which will lead to accessing of gser->ioport and thus causing null pointer dereference.Add a null pointer check to prevent this. Added a static spinlock to prevent gser->ioport from becoming null after the newly added check.

In the Linux kernel, the following vulnerability has been resolved: net: wwan: iosm: fix NULL pointer dereference when removing device In suspend and resume cycle, the removal and rescan of device ends up in NULL pointer dereference. During driver initialization, if the ipc_imem_wwan_channel_init() fails to get the valid device capabilities it returns an error and further no resource (wwan struct) will be allocated. Now in this situation if driver removal procedure is initiated it would result in NULL pointer exception since unallocated wwan struct is dereferenced inside ipc_wwan_deinit(). ipc_imem_run_state_worker() to handle the called functions return value and to release the resource in failure case. It also reports the link down event in failure cases. The user space application can handle this event to do a device reset for restoring the device communication.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix potential array out of bounds access Account for IWL_SEC_WEP_KEY_OFFSET when needed while verifying key_len size in iwl_mvm_sec_key_add().

In the Linux kernel, the following vulnerability has been resolved: cifs: Release folio lock on fscache read hit. Under the current code, when cifs_readpage_worker is called, the call contract is that the callee should unlock the page. This is documented in the read_folio section of Documentation/filesystems/vfs.rst as: > The filesystem should unlock the folio once the read has completed, > whether it was successful or not. Without this change, when fscache is in use and cache hit occurs during a read, the page lock is leaked, producing the following stack on subsequent reads (via mmap) to the page: $ cat /proc/3890/task/12864/stack [<0>] folio_wait_bit_common+0x124/0x350 [<0>] filemap_read_folio+0xad/0xf0 [<0>] filemap_fault+0x8b1/0xab0 [<0>] __do_fault+0x39/0x150 [<0>] do_fault+0x25c/0x3e0 [<0>] __handle_mm_fault+0x6ca/0xc70 [<0>] handle_mm_fault+0xe9/0x350 [<0>] do_user_addr_fault+0x225/0x6c0 [<0>] exc_page_fault+0x84/0x1b0 [<0>] asm_exc_page_fault+0x27/0x30 This requires a reboot to resolve; it is a deadlock. Note however that the call to cifs_readpage_from_fscache does mark the page clean, but does not free the folio lock. This happens in __cifs_readpage_from_fscache on success. Releasing the lock at that point however is not appropriate as cifs_readahead also calls cifs_readpage_from_fscache and *does* unconditionally release the lock after its return. This change therefore effectively makes cifs_readpage_worker work like cifs_readahead.

In the Linux kernel, the following vulnerability has been resolved: driver core: fix resource leak in device_add() When calling kobject_add() failed in device_add(), it will call cleanup_glue_dir() to free resource. But in kobject_add(), dev->kobj.parent has been set to NULL. This will cause resource leak. The process is as follows: device_add() get_device_parent() class_dir_create_and_add() kobject_add() //kobject_get() ... dev->kobj.parent = kobj; ... kobject_add() //failed, but set dev->kobj.parent = NULL ... glue_dir = get_glue_dir(dev) //glue_dir = NULL, and goto //"Error" label ... cleanup_glue_dir() //becaues glue_dir is NULL, not call //kobject_put() The preceding problem may cause insmod mac80211_hwsim.ko to failed. sysfs: cannot create duplicate filename '/devices/virtual/mac80211_hwsim' Call Trace: <TASK> dump_stack_lvl+0x8e/0xd1 sysfs_warn_dup.cold+0x1c/0x29 sysfs_create_dir_ns+0x224/0x280 kobject_add_internal+0x2aa/0x880 kobject_add+0x135/0x1a0 get_device_parent+0x3d7/0x590 device_add+0x2aa/0x1cb0 device_create_groups_vargs+0x1eb/0x260 device_create+0xdc/0x110 mac80211_hwsim_new_radio+0x31e/0x4790 [mac80211_hwsim] init_mac80211_hwsim+0x48d/0x1000 [mac80211_hwsim] do_one_initcall+0x10f/0x630 do_init_module+0x19f/0x5e0 load_module+0x64b7/0x6eb0 __do_sys_finit_module+0x140/0x200 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 </TASK> kobject_add_internal failed for mac80211_hwsim with -EEXIST, don't try to register things with the same name in the same directory.

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Avoid fcport pointer dereference Klocwork reported warning of NULL pointer may be dereferenced. The routine exits when sa_ctl is NULL and fcport is allocated after the exit call thus causing NULL fcport pointer to dereference at the time of exit. To avoid fcport pointer dereference, exit the routine when sa_ctl is NULL.

In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: Fix use-after-free bugs in otx2_sync_tstamp() The original code relies on cancel_delayed_work() in otx2_ptp_destroy(), which does not ensure that the delayed work item synctstamp_work has fully completed if it was already running. This leads to use-after-free scenarios where otx2_ptp is deallocated by otx2_ptp_destroy(), while synctstamp_work remains active and attempts to dereference otx2_ptp in otx2_sync_tstamp(). Furthermore, the synctstamp_work is cyclic, the likelihood of triggering the bug is nonnegligible. A typical race condition is illustrated below: CPU 0 (cleanup) | CPU 1 (delayed work callback) otx2_remove() | otx2_ptp_destroy() | otx2_sync_tstamp() cancel_delayed_work() | kfree(ptp) | | ptp = container_of(...); //UAF | ptp-> //UAF This is confirmed by a KASAN report: BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x7d7/0x8c0 Write of size 8 at addr ffff88800aa09a18 by task bash/136 ... Call Trace: <IRQ> dump_stack_lvl+0x55/0x70 print_report+0xcf/0x610 ? __run_timer_base.part.0+0x7d7/0x8c0 kasan_report+0xb8/0xf0 ? __run_timer_base.part.0+0x7d7/0x8c0 __run_timer_base.part.0+0x7d7/0x8c0 ? __pfx___run_timer_base.part.0+0x10/0x10 ? __pfx_read_tsc+0x10/0x10 ? ktime_get+0x60/0x140 ? lapic_next_event+0x11/0x20 ? clockevents_program_event+0x1d4/0x2a0 run_timer_softirq+0xd1/0x190 handle_softirqs+0x16a/0x550 irq_exit_rcu+0xaf/0xe0 sysvec_apic_timer_interrupt+0x70/0x80 </IRQ> ... Allocated by task 1: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x7f/0x90 otx2_ptp_init+0xb1/0x860 otx2_probe+0x4eb/0xc30 local_pci_probe+0xdc/0x190 pci_device_probe+0x2fe/0x470 really_probe+0x1ca/0x5c0 __driver_probe_device+0x248/0x310 driver_probe_device+0x44/0x120 __driver_attach+0xd2/0x310 bus_for_each_dev+0xed/0x170 bus_add_driver+0x208/0x500 driver_register+0x132/0x460 do_one_initcall+0x89/0x300 kernel_init_freeable+0x40d/0x720 kernel_init+0x1a/0x150 ret_from_fork+0x10c/0x1a0 ret_from_fork_asm+0x1a/0x30 Freed by task 136: kasan_save_stack+0x24/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3a/0x60 __kasan_slab_free+0x3f/0x50 kfree+0x137/0x370 otx2_ptp_destroy+0x38/0x80 otx2_remove+0x10d/0x4c0 pci_device_remove+0xa6/0x1d0 device_release_driver_internal+0xf8/0x210 pci_stop_bus_device+0x105/0x150 pci_stop_and_remove_bus_device_locked+0x15/0x30 remove_store+0xcc/0xe0 kernfs_fop_write_iter+0x2c3/0x440 vfs_write+0x871/0xd70 ksys_write+0xee/0x1c0 do_syscall_64+0xac/0x280 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure that the delayed work item is properly canceled before the otx2_ptp is deallocated. This bug was initially identified through static analysis. To reproduce and test it, I simulated the OcteonTX2 PCI device in QEMU and introduced artificial delays within the otx2_sync_tstamp() function to increase the likelihood of triggering the bug.