CVE Feed

In the Linux kernel, the following vulnerability has been resolved: iommu/omap: Fix buffer overflow in debugfs There are two issues here: 1) The "len" variable needs to be checked before the very first write. Otherwise if omap2_iommu_dump_ctx() with "bytes" less than 32 it is a buffer overflow. 2) The snprintf() function returns the number of bytes that *would* have been copied if there were enough space. But we want to know the number of bytes which were *actually* copied so use scnprintf() instead.

In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: wraparound mbox producer index Driver is not handling the wraparound of the mbox producer index correctly. Currently the wraparound happens once u32 max is reached. Bit 31 of the producer index register is special and should be set only once for the first command. Because the producer index overflow setting bit31 after a long time, FW goes to initialization sequence and this causes FW hang. Fix is to wraparound the mbox producer index once it reaches u16 max.

In the Linux kernel, the following vulnerability has been resolved: af_unix: Fix data-races around user->unix_inflight. user->unix_inflight is changed under spin_lock(unix_gc_lock), but too_many_unix_fds() reads it locklessly. Let's annotate the write/read accesses to user->unix_inflight. BUG: KCSAN: data-race in unix_attach_fds / unix_inflight write to 0xffffffff8546f2d0 of 8 bytes by task 44798 on cpu 1: unix_inflight+0x157/0x180 net/unix/scm.c:66 unix_attach_fds+0x147/0x1e0 net/unix/scm.c:123 unix_scm_to_skb net/unix/af_unix.c:1827 [inline] unix_dgram_sendmsg+0x46a/0x14f0 net/unix/af_unix.c:1950 unix_seqpacket_sendmsg net/unix/af_unix.c:2308 [inline] unix_seqpacket_sendmsg+0xba/0x130 net/unix/af_unix.c:2292 sock_sendmsg_nosec net/socket.c:725 [inline] sock_sendmsg+0x148/0x160 net/socket.c:748 ____sys_sendmsg+0x4e4/0x610 net/socket.c:2494 ___sys_sendmsg+0xc6/0x140 net/socket.c:2548 __sys_sendmsg+0x94/0x140 net/socket.c:2577 __do_sys_sendmsg net/socket.c:2586 [inline] __se_sys_sendmsg net/socket.c:2584 [inline] __x64_sys_sendmsg+0x45/0x50 net/socket.c:2584 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 read to 0xffffffff8546f2d0 of 8 bytes by task 44814 on cpu 0: too_many_unix_fds net/unix/scm.c:101 [inline] unix_attach_fds+0x54/0x1e0 net/unix/scm.c:110 unix_scm_to_skb net/unix/af_unix.c:1827 [inline] unix_dgram_sendmsg+0x46a/0x14f0 net/unix/af_unix.c:1950 unix_seqpacket_sendmsg net/unix/af_unix.c:2308 [inline] unix_seqpacket_sendmsg+0xba/0x130 net/unix/af_unix.c:2292 sock_sendmsg_nosec net/socket.c:725 [inline] sock_sendmsg+0x148/0x160 net/socket.c:748 ____sys_sendmsg+0x4e4/0x610 net/socket.c:2494 ___sys_sendmsg+0xc6/0x140 net/socket.c:2548 __sys_sendmsg+0x94/0x140 net/socket.c:2577 __do_sys_sendmsg net/socket.c:2586 [inline] __se_sys_sendmsg net/socket.c:2584 [inline] __x64_sys_sendmsg+0x45/0x50 net/socket.c:2584 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 value changed: 0x000000000000000c -> 0x000000000000000d Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 44814 Comm: systemd-coredum Not tainted 6.4.0-11989-g6843306689af #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014

In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: avs: Fix potential RX buffer overflow If an event caused firmware to return invalid RX size for LARGE_CONFIG_GET, memcpy_fromio() could end up copying too many bytes. Fix by utilizing min_t().

In the Linux kernel, the following vulnerability has been resolved: jbd2: fix potential use-after-free in jbd2_fc_wait_bufs In 'jbd2_fc_wait_bufs' use 'bh' after put buffer head reference count which may lead to use-after-free. So judge buffer if uptodate before put buffer head reference count.

In the Linux kernel, the following vulnerability has been resolved: video/aperture: Call sysfb_disable() before removing PCI devices Call sysfb_disable() from aperture_remove_conflicting_pci_devices() before removing PCI devices. Without, simpledrm can still bind to simple-framebuffer devices after the hardware driver has taken over the hardware. Both drivers interfere with each other and results are undefined. Reported modesetting errors [1] are shown below. ---- snap ---- rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 13-.... } 7 jiffies s: 165 root: 0x2000/. rcu: blocking rcu_node structures (internal RCU debug): Task dump for CPU 13: task:X state:R running task stack: 0 pid: 4242 ppid: 4228 flags:0x00000008 Call Trace: <TASK> ? commit_tail+0xd7/0x130 ? drm_atomic_helper_commit+0x126/0x150 ? drm_atomic_commit+0xa4/0xe0 ? drm_plane_get_damage_clips.cold+0x1c/0x1c ? drm_atomic_helper_dirtyfb+0x19e/0x280 ? drm_mode_dirtyfb_ioctl+0x10f/0x1e0 ? drm_mode_getfb2_ioctl+0x2d0/0x2d0 ? drm_ioctl_kernel+0xc4/0x150 ? drm_ioctl+0x246/0x3f0 ? drm_mode_getfb2_ioctl+0x2d0/0x2d0 ? __x64_sys_ioctl+0x91/0xd0 ? do_syscall_64+0x60/0xd0 ? entry_SYSCALL_64_after_hwframe+0x4b/0xb5 </TASK> ... rcu: INFO: rcu_sched detected expedited stalls on CPUs/tasks: { 13-.... } 30 jiffies s: 169 root: 0x2000/. rcu: blocking rcu_node structures (internal RCU debug): Task dump for CPU 13: task:X state:R running task stack: 0 pid: 4242 ppid: 4228 flags:0x0000400e Call Trace: <TASK> ? memcpy_toio+0x76/0xc0 ? memcpy_toio+0x1b/0xc0 ? drm_fb_memcpy_toio+0x76/0xb0 ? drm_fb_blit_toio+0x75/0x2b0 ? simpledrm_simple_display_pipe_update+0x132/0x150 ? drm_atomic_helper_commit_planes+0xb6/0x230 ? drm_atomic_helper_commit_tail+0x44/0x80 ? commit_tail+0xd7/0x130 ? drm_atomic_helper_commit+0x126/0x150 ? drm_atomic_commit+0xa4/0xe0 ? drm_plane_get_damage_clips.cold+0x1c/0x1c ? drm_atomic_helper_dirtyfb+0x19e/0x280 ? drm_mode_dirtyfb_ioctl+0x10f/0x1e0 ? drm_mode_getfb2_ioctl+0x2d0/0x2d0 ? drm_ioctl_kernel+0xc4/0x150 ? drm_ioctl+0x246/0x3f0 ? drm_mode_getfb2_ioctl+0x2d0/0x2d0 ? __x64_sys_ioctl+0x91/0xd0 ? do_syscall_64+0x60/0xd0 ? entry_SYSCALL_64_after_hwframe+0x4b/0xb5 </TASK> The problem was added by commit 5e0137612430 ("video/aperture: Disable and unregister sysfb devices via aperture helpers") to v6.0.3 and does not exist in the mainline branch. The mainline commit 5e0137612430 ("video/aperture: Disable and unregister sysfb devices via aperture helpers") has been backported from v6.0-rc1 to stable v6.0.3 from a larger patch series [2] that reworks fbdev framebuffer ownership. The backport misses a change to aperture_remove_conflicting_pci_devices(). Mainline itself is fine, because the function does not exist there as a result of the patch series. Instead of backporting the whole series, fix the additional function.

A Clickjacking vulnerability exists in Rems' Employee Management System 1.0. This flaw allows remote attackers to execute arbitrary JavaScript on the department.php page by injecting a malicious payload into the Department Name field under Add Department.

Cross Site Scripting (xss) vulnerability in ServitiumCRM 2.10 allowing attackers to execute arbitrary code via a crafted URL to the mobile parameter.

Teampel 5.1.6 is vulnerable to SQL Injection in /Common/login.aspx.

A null pointer dereference vulnerability was discovered in SumatraPDF 3.5.2 during the processing of a crafted .djvu file. When the file is opened, the application crashes inside libmupdf.dll, specifically in the DataPool::has_data() function.

feiskyer mcp-kubernetes-server through 0.1.11 does not consider chained commands in the implementation of --disable-write and --disable-delete, e.g., it allows a "kubectl version; kubectl delete pod" command because the first word (i.e., "version") is not a write or delete operation.

feiskyer mcp-kubernetes-server through 0.1.11 allows OS command injection, even in read-only mode, via /mcp/kubectl because shell=True is used. NOTE: this is unrelated to mcp-server-kubernetes and CVE-2025-53355.

In the Linux kernel, the following vulnerability has been resolved: PM: domains: fix memory leak with using debugfs_lookup() When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

In the Linux kernel, the following vulnerability has been resolved: ACPI: processor: idle: Check acpi_fetch_acpi_dev() return value The return value of acpi_fetch_acpi_dev() could be NULL, which would cause a NULL pointer dereference to occur in acpi_device_hid(). [ rjw: Subject and changelog edits, added empty line after if () ]

In the Linux kernel, the following vulnerability has been resolved: mtd: core: add missing of_node_get() in dynamic partitions code This fixes unbalanced of_node_put(): [ 1.078910] 6 cmdlinepart partitions found on MTD device gpmi-nand [ 1.085116] Creating 6 MTD partitions on "gpmi-nand": [ 1.090181] 0x000000000000-0x000008000000 : "nandboot" [ 1.096952] 0x000008000000-0x000009000000 : "nandfit" [ 1.103547] 0x000009000000-0x00000b000000 : "nandkernel" [ 1.110317] 0x00000b000000-0x00000c000000 : "nanddtb" [ 1.115525] ------------[ cut here ]------------ [ 1.120141] refcount_t: addition on 0; use-after-free. [ 1.125328] WARNING: CPU: 0 PID: 1 at lib/refcount.c:25 refcount_warn_saturate+0xdc/0x148 [ 1.133528] Modules linked in: [ 1.136589] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.0.0-rc7-next-20220930-04543-g8cf3f7 [ 1.146342] Hardware name: Freescale i.MX8DXL DDR3L EVK (DT) [ 1.151999] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1.158965] pc : refcount_warn_saturate+0xdc/0x148 [ 1.163760] lr : refcount_warn_saturate+0xdc/0x148 [ 1.168556] sp : ffff800009ddb080 [ 1.171866] x29: ffff800009ddb080 x28: ffff800009ddb35a x27: 0000000000000002 [ 1.179015] x26: ffff8000098b06ad x25: ffffffffffffffff x24: ffff0a00ffffff05 [ 1.186165] x23: ffff00001fdf6470 x22: ffff800009ddb367 x21: 0000000000000000 [ 1.193314] x20: ffff00001fdfebe8 x19: ffff00001fdfec50 x18: ffffffffffffffff [ 1.200464] x17: 0000000000000000 x16: 0000000000000118 x15: 0000000000000004 [ 1.207614] x14: 0000000000000fff x13: ffff800009bca248 x12: 0000000000000003 [ 1.214764] x11: 00000000ffffefff x10: c0000000ffffefff x9 : 4762cb2ccb52de00 [ 1.221914] x8 : 4762cb2ccb52de00 x7 : 205d313431303231 x6 : 312e31202020205b [ 1.229063] x5 : ffff800009d55c1f x4 : 0000000000000001 x3 : 0000000000000000 [ 1.236213] x2 : 0000000000000000 x1 : ffff800009954be6 x0 : 000000000000002a [ 1.243365] Call trace: [ 1.245806] refcount_warn_saturate+0xdc/0x148 [ 1.250253] kobject_get+0x98/0x9c [ 1.253658] of_node_get+0x20/0x34 [ 1.257072] of_fwnode_get+0x3c/0x54 [ 1.260652] fwnode_get_nth_parent+0xd8/0xf4 [ 1.264926] fwnode_full_name_string+0x3c/0xb4 [ 1.269373] device_node_string+0x498/0x5b4 [ 1.273561] pointer+0x41c/0x5d0 [ 1.276793] vsnprintf+0x4d8/0x694 [ 1.280198] vprintk_store+0x164/0x528 [ 1.283951] vprintk_emit+0x98/0x164 [ 1.287530] vprintk_default+0x44/0x6c [ 1.291284] vprintk+0xf0/0x134 [ 1.294428] _printk+0x54/0x7c [ 1.297486] of_node_release+0xe8/0x128 [ 1.301326] kobject_put+0x98/0xfc [ 1.304732] of_node_put+0x1c/0x28 [ 1.308137] add_mtd_device+0x484/0x6d4 [ 1.311977] add_mtd_partitions+0xf0/0x1d0 [ 1.316078] parse_mtd_partitions+0x45c/0x518 [ 1.320439] mtd_device_parse_register+0xb0/0x274 [ 1.325147] gpmi_nand_probe+0x51c/0x650 [ 1.329074] platform_probe+0xa8/0xd0 [ 1.332740] really_probe+0x130/0x334 [ 1.336406] __driver_probe_device+0xb4/0xe0 [ 1.340681] driver_probe_device+0x3c/0x1f8 [ 1.344869] __driver_attach+0xdc/0x1a4 [ 1.348708] bus_for_each_dev+0x80/0xcc [ 1.352548] driver_attach+0x24/0x30 [ 1.356127] bus_add_driver+0x108/0x1f4 [ 1.359967] driver_register+0x78/0x114 [ 1.363807] __platform_driver_register+0x24/0x30 [ 1.368515] gpmi_nand_driver_init+0x1c/0x28 [ 1.372798] do_one_initcall+0xbc/0x238 [ 1.376638] do_initcall_level+0x94/0xb4 [ 1.380565] do_initcalls+0x54/0x94 [ 1.384058] do_basic_setup+0x1c/0x28 [ 1.387724] kernel_init_freeable+0x110/0x188 [ 1.392084] kernel_init+0x20/0x1a0 [ 1.395578] ret_from_fork+0x10/0x20 [ 1.399157] ---[ end trace 0000000000000000 ]--- [ 1.403782] ------------[ cut here ]------------

In the Linux kernel, the following vulnerability has been resolved: mm,hugetlb: take hugetlb_lock before decrementing h->resv_huge_pages The h->*_huge_pages counters are protected by the hugetlb_lock, but alloc_huge_page has a corner case where it can decrement the counter outside of the lock. This could lead to a corrupted value of h->resv_huge_pages, which we have observed on our systems. Take the hugetlb_lock before decrementing h->resv_huge_pages to avoid a potential race.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dp: fix bridge lifetime Device-managed resources allocated post component bind must be tied to the lifetime of the aggregate DRM device or they will not necessarily be released when binding of the aggregate device is deferred. This can lead resource leaks or failure to bind the aggregate device when binding is later retried and a second attempt to allocate the resources is made. For the DP bridges, previously allocated bridges will leak on probe deferral. Fix this by amending the DP parser interface and tying the lifetime of the bridge device to the DRM device rather than DP platform device. Patchwork: https://patchwork.freedesktop.org/patch/502667/

In the Linux kernel, the following vulnerability has been resolved: clk: socfpga: Fix memory leak in socfpga_gate_init() Free @socfpga_clk and @ops on the error path to avoid memory leak issue.

In the Linux kernel, the following vulnerability has been resolved: kprobes: Fix check for probe enabled in kill_kprobe() In kill_kprobe(), the check whether disarm_kprobe_ftrace() needs to be called always fails. This is because before that we set the KPROBE_FLAG_GONE flag for kprobe so that "!kprobe_disabled(p)" is always false. The disarm_kprobe_ftrace() call introduced by commit: 0cb2f1372baa ("kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler") to fix the NULL pointer reference problem. When the probe is enabled, if we do not disarm it, this problem still exists. Fix it by putting the probe enabled check before setting the KPROBE_FLAG_GONE flag.

In the Linux kernel, the following vulnerability has been resolved: drm/vkms: Fix memory leak in vkms_init() A memory leak was reported after the vkms module install failed. unreferenced object 0xffff88810bc28520 (size 16): comm "modprobe", pid 9662, jiffies 4298009455 (age 42.590s) hex dump (first 16 bytes): 01 01 00 64 81 88 ff ff 00 00 dc 0a 81 88 ff ff ...d............ backtrace: [<00000000e7561ff8>] kmalloc_trace+0x27/0x60 [<000000000b1954a0>] 0xffffffffc45200a9 [<00000000abbf1da0>] do_one_initcall+0xd0/0x4f0 [<000000001505ee87>] do_init_module+0x1a4/0x680 [<00000000958079ad>] load_module+0x6249/0x7110 [<00000000117e4696>] __do_sys_finit_module+0x140/0x200 [<00000000f74b12d2>] do_syscall_64+0x35/0x80 [<000000008fc6fcde>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 The reason is that the vkms_init() returns without checking the return value of vkms_create(), and if the vkms_create() failed, the config allocated at the beginning of vkms_init() is leaked. vkms_init() config = kmalloc(...) # config allocated ... return vkms_create() # vkms_create failed and config is leaked Fix this problem by checking return value of vkms_create() and free the config if error happened.

This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

In the Linux kernel, the following vulnerability has been resolved: kcm: annotate data-races around kcm->rx_psock kcm->rx_psock can be read locklessly in kcm_rfree(). Annotate the read and writes accordingly. We do the same for kcm->rx_wait in the following patch. syzbot reported: BUG: KCSAN: data-race in kcm_rfree / unreserve_rx_kcm write to 0xffff888123d827b8 of 8 bytes by task 2758 on cpu 1: unreserve_rx_kcm+0x72/0x1f0 net/kcm/kcmsock.c:313 kcm_rcv_strparser+0x2b5/0x3a0 net/kcm/kcmsock.c:373 __strp_recv+0x64c/0xd20 net/strparser/strparser.c:301 strp_recv+0x6d/0x80 net/strparser/strparser.c:335 tcp_read_sock+0x13e/0x5a0 net/ipv4/tcp.c:1703 strp_read_sock net/strparser/strparser.c:358 [inline] do_strp_work net/strparser/strparser.c:406 [inline] strp_work+0xe8/0x180 net/strparser/strparser.c:415 process_one_work+0x3d3/0x720 kernel/workqueue.c:2289 worker_thread+0x618/0xa70 kernel/workqueue.c:2436 kthread+0x1a9/0x1e0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 read to 0xffff888123d827b8 of 8 bytes by task 5859 on cpu 0: kcm_rfree+0x14c/0x220 net/kcm/kcmsock.c:181 skb_release_head_state+0x8e/0x160 net/core/skbuff.c:841 skb_release_all net/core/skbuff.c:852 [inline] __kfree_skb net/core/skbuff.c:868 [inline] kfree_skb_reason+0x5c/0x260 net/core/skbuff.c:891 kfree_skb include/linux/skbuff.h:1216 [inline] kcm_recvmsg+0x226/0x2b0 net/kcm/kcmsock.c:1161 ____sys_recvmsg+0x16c/0x2e0 ___sys_recvmsg net/socket.c:2743 [inline] do_recvmmsg+0x2f1/0x710 net/socket.c:2837 __sys_recvmmsg net/socket.c:2916 [inline] __do_sys_recvmmsg net/socket.c:2939 [inline] __se_sys_recvmmsg net/socket.c:2932 [inline] __x64_sys_recvmmsg+0xde/0x160 net/socket.c:2932 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0xffff88812971ce00 -> 0x0000000000000000 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 5859 Comm: syz-executor.3 Not tainted 6.0.0-syzkaller-12189-g19d17ab7c68b-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022

In the Linux kernel, the following vulnerability has been resolved: coresight: trbe: remove cpuhp instance node before remove cpuhp state cpuhp_state_add_instance() and cpuhp_state_remove_instance() should be used in pairs. Or there will lead to the warn on cpuhp_remove_multi_state() since the cpuhp_step list is not empty. The following is the error log with 'rmmod coresight-trbe': Error: Removing state 215 which has instances left. Call trace: __cpuhp_remove_state_cpuslocked+0x144/0x160 __cpuhp_remove_state+0xac/0x100 arm_trbe_device_remove+0x2c/0x60 [coresight_trbe] platform_remove+0x34/0x70 device_remove+0x54/0x90 device_release_driver_internal+0x1e4/0x250 driver_detach+0x5c/0xb0 bus_remove_driver+0x64/0xc0 driver_unregister+0x3c/0x70 platform_driver_unregister+0x20/0x30 arm_trbe_exit+0x1c/0x658 [coresight_trbe] __arm64_sys_delete_module+0x1ac/0x24c invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0x58/0x1a0 do_el0_svc+0x38/0xd0 el0_svc+0x2c/0xc0 el0t_64_sync_handler+0x1ac/0x1b0 el0t_64_sync+0x19c/0x1a0 ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: md/raid10: prevent soft lockup while flush writes Currently, there is no limit for raid1/raid10 plugged bio. While flushing writes, raid1 has cond_resched() while raid10 doesn't, and too many writes can cause soft lockup. Follow up soft lockup can be triggered easily with writeback test for raid10 with ramdisks: watchdog: BUG: soft lockup - CPU#10 stuck for 27s! [md0_raid10:1293] Call Trace: <TASK> call_rcu+0x16/0x20 put_object+0x41/0x80 __delete_object+0x50/0x90 delete_object_full+0x2b/0x40 kmemleak_free+0x46/0xa0 slab_free_freelist_hook.constprop.0+0xed/0x1a0 kmem_cache_free+0xfd/0x300 mempool_free_slab+0x1f/0x30 mempool_free+0x3a/0x100 bio_free+0x59/0x80 bio_put+0xcf/0x2c0 free_r10bio+0xbf/0xf0 raid_end_bio_io+0x78/0xb0 one_write_done+0x8a/0xa0 raid10_end_write_request+0x1b4/0x430 bio_endio+0x175/0x320 brd_submit_bio+0x3b9/0x9b7 [brd] __submit_bio+0x69/0xe0 submit_bio_noacct_nocheck+0x1e6/0x5a0 submit_bio_noacct+0x38c/0x7e0 flush_pending_writes+0xf0/0x240 raid10d+0xac/0x1ed0 Fix the problem by adding cond_resched() to raid10 like what raid1 did. Note that unlimited plugged bio still need to be optimized, for example, in the case of lots of dirty pages writeback, this will take lots of memory and io will spend a long time in plug, hence io latency is bad.

In the Linux kernel, the following vulnerability has been resolved: tracing: Fix null pointer dereference in tracing_err_log_open() Fix an issue in function 'tracing_err_log_open'. The function doesn't call 'seq_open' if the file is opened only with write permissions, which results in 'file->private_data' being left as null. If we then use 'lseek' on that opened file, 'seq_lseek' dereferences 'file->private_data' in 'mutex_lock(&m->lock)', resulting in a kernel panic. Writing to this node requires root privileges, therefore this bug has very little security impact. Tracefs node: /sys/kernel/tracing/error_log Example Kernel panic: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000038 Call trace: mutex_lock+0x30/0x110 seq_lseek+0x34/0xb8 __arm64_sys_lseek+0x6c/0xb8 invoke_syscall+0x58/0x13c el0_svc_common+0xc4/0x10c do_el0_svc+0x24/0x98 el0_svc+0x24/0x88 el0t_64_sync_handler+0x84/0xe4 el0t_64_sync+0x1b4/0x1b8 Code: d503201f aa0803e0 aa1f03e1 aa0103e9 (c8e97d02) ---[ end trace 561d1b49c12cf8a5 ]--- Kernel panic - not syncing: Oops: Fatal exception

In the Linux kernel, the following vulnerability has been resolved: usb: ucsi_acpi: Increase the command completion timeout Commit 130a96d698d7 ("usb: typec: ucsi: acpi: Increase command completion timeout value") increased the timeout from 5 seconds to 60 seconds due to issues related to alternate mode discovery. After the alternate mode discovery switch to polled mode the timeout was reduced, but instead of being set back to 5 seconds it was reduced to 1 second. This is causing problems when using a Lenovo ThinkPad X1 yoga gen7 connected over Type-C to a LG 27UL850-W (charging DP over Type-C). When the monitor is already connected at boot the following error is logged: "PPM init failed (-110)", /sys/class/typec is empty and on unplugging the NULL pointer deref fixed earlier in this series happens. When the monitor is connected after boot the following error is logged instead: "GET_CONNECTOR_STATUS failed (-110)". Setting the timeout back to 5 seconds fixes both cases.

In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c The missing IP_SET_HASH_WITH_NET0 macro in ip_set_hash_netportnet can lead to the use of wrong `CIDR_POS(c)` for calculating array offsets, which can lead to integer underflow. As a result, it leads to slab out-of-bound access. This patch adds back the IP_SET_HASH_WITH_NET0 macro to ip_set_hash_netportnet to address the issue.

In the Linux kernel, the following vulnerability has been resolved: ACPICA: Avoid undefined behavior: applying zero offset to null pointer ACPICA commit 770653e3ba67c30a629ca7d12e352d83c2541b1e Before this change we see the following UBSAN stack trace in Fuchsia: #0 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 #1.2 0x000020d0f660777f in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x3d77f #1.1 0x000020d0f660777f in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x3d77f #1 0x000020d0f660777f in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:387 <libclang_rt.asan.so>+0x3d77f #2 0x000020d0f660b96d in handlepointer_overflow_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:809 <libclang_rt.asan.so>+0x4196d #3 0x000020d0f660b50d in compiler-rt/lib/ubsan/ubsan_handlers.cpp:815 <libclang_rt.asan.so>+0x4150d #4 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 #5 0x000021e4213e2369 in acpi_ds_call_control_method(struct acpi_thread_state*, struct acpi_walk_state*, union acpi_parse_object*) ../../third_party/acpica/source/components/dispatcher/dsmethod.c:605 <platform-bus-x86.so>+0x262369 #6 0x000021e421437fac in acpi_ps_parse_aml(struct acpi_walk_state*) ../../third_party/acpica/source/components/parser/psparse.c:550 <platform-bus-x86.so>+0x2b7fac #7 0x000021e4214464d2 in acpi_ps_execute_method(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/parser/psxface.c:244 <platform-bus-x86.so>+0x2c64d2 #8 0x000021e4213aa052 in acpi_ns_evaluate(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/namespace/nseval.c:250 <platform-bus-x86.so>+0x22a052 #9 0x000021e421413dd8 in acpi_ns_init_one_device(acpi_handle, u32, void*, void**) ../../third_party/acpica/source/components/namespace/nsinit.c:735 <platform-bus-x86.so>+0x293dd8 #10 0x000021e421429e98 in acpi_ns_walk_namespace(acpi_object_type, acpi_handle, u32, u32, acpi_walk_callback, acpi_walk_callback, void*, void**) ../../third_party/acpica/source/components/namespace/nswalk.c:298 <platform-bus-x86.so>+0x2a9e98 #11 0x000021e4214131ac in acpi_ns_initialize_devices(u32) ../../third_party/acpica/source/components/namespace/nsinit.c:268 <platform-bus-x86.so>+0x2931ac #12 0x000021e42147c40d in acpi_initialize_objects(u32) ../../third_party/acpica/source/components/utilities/utxfinit.c:304 <platform-bus-x86.so>+0x2fc40d #13 0x000021e42126d603 in acpi::acpi_impl::initialize_acpi(acpi::acpi_impl*) ../../src/devices/board/lib/acpi/acpi-impl.cc:224 <platform-bus-x86.so>+0xed603 Add a simple check that avoids incrementing a pointer by zero, but otherwise behaves as before. Note that our findings are against ACPICA 20221020, but the same code exists on master.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: don't allow to overwrite ENDPOINT0 attributes A bad USB device is able to construct a service connection response message with target endpoint being ENDPOINT0 which is reserved for HTC_CTRL_RSVD_SVC and should not be modified to be used for any other services. Reject such service connection responses. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix race on port output assume the following setup on a single machine: 1. An openvswitch instance with one bridge and default flows 2. two network namespaces "server" and "client" 3. two ovs interfaces "server" and "client" on the bridge 4. for each ovs interface a veth pair with a matching name and 32 rx and tx queues 5. move the ends of the veth pairs to the respective network namespaces 6. assign ip addresses to each of the veth ends in the namespaces (needs to be the same subnet) 7. start some http server on the server network namespace 8. test if a client in the client namespace can reach the http server when following the actions below the host has a chance of getting a cpu stuck in a infinite loop: 1. send a large amount of parallel requests to the http server (around 3000 curls should work) 2. in parallel delete the network namespace (do not delete interfaces or stop the server, just kill the namespace) there is a low chance that this will cause the below kernel cpu stuck message. If this does not happen just retry. Below there is also the output of bpftrace for the functions mentioned in the output. The series of events happening here is: 1. the network namespace is deleted calling `unregister_netdevice_many_notify` somewhere in the process 2. this sets first `NETREG_UNREGISTERING` on both ends of the veth and then runs `synchronize_net` 3. it then calls `call_netdevice_notifiers` with `NETDEV_UNREGISTER` 4. this is then handled by `dp_device_event` which calls `ovs_netdev_detach_dev` (if a vport is found, which is the case for the veth interface attached to ovs) 5. this removes the rx_handlers of the device but does not prevent packages to be sent to the device 6. `dp_device_event` then queues the vport deletion to work in background as a ovs_lock is needed that we do not hold in the unregistration path 7. `unregister_netdevice_many_notify` continues to call `netdev_unregister_kobject` which sets `real_num_tx_queues` to 0 8. port deletion continues (but details are not relevant for this issue) 9. at some future point the background task deletes the vport If after 7. but before 9. a packet is send to the ovs vport (which is not deleted at this point in time) which forwards it to the `dev_queue_xmit` flow even though the device is unregistering. In `skb_tx_hash` (which is called in the `dev_queue_xmit`) path there is a while loop (if the packet has a rx_queue recorded) that is infinite if `dev->real_num_tx_queues` is zero. To prevent this from happening we update `do_output` to handle devices without carrier the same as if the device is not found (which would be the code path after 9. is done). Additionally we now produce a warning in `skb_tx_hash` if we will hit the infinite loop. bpftrace (first word is function name): __dev_queue_xmit server: real_num_tx_queues: 1, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 1 netdev_core_pick_tx server: addr: 0xffff9f0a46d4a000 real_num_tx_queues: 1, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 1 dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 2, reg_state: 1 synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024 synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024 synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024 synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024 dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 6, reg_state: 2 ovs_netdev_detach_dev server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, reg_state: 2 netdev_rx_handler_unregister server: real_num_tx_queues: 1, cpu: 9, pid: 21024, tid: 21024, reg_state: 2 synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024 netdev_rx_handler_unregister ret server: real_num_tx_queues: 1, cpu: 9, pid: 21024, tid: 21024, reg_state: 2 dp_ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: irqchip/alpine-msi: Fix refcount leak in alpine_msix_init_domains of_irq_find_parent() returns a node pointer with refcount incremented, We should use of_node_put() on it when not needed anymore. Add missing of_node_put() to avoid refcount leak.

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: qcom: Fix potential memory leak Function dwc3_qcom_probe() allocates memory for resource structure which is pointed by parent_res pointer. This memory is not freed. This leads to memory leak. Use stack memory to prevent memory leak. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: rely on mt76_connac2_mac_tx_rate_val In order to fix a possible NULL pointer dereference in mt7996_mac_write_txwi() of vif pointer, export mt76_connac2_mac_tx_rate_val utility routine and reuse it in mt7996 driver.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus_core) Fix NULL pointer dereference Pass i2c_client to _pmbus_is_enabled to drop the assumption that a regulator device is passed in. This will fix the issue of a NULL pointer dereference when called from _pmbus_get_flags.

In the Linux kernel, the following vulnerability has been resolved: ublk: fail to recover device if queue setup is interrupted In ublk_ctrl_end_recovery(), if wait_for_completion_interruptible() is interrupted by signal, queues aren't setup successfully yet, so we have to fail UBLK_CMD_END_USER_RECOVERY, otherwise kernel oops can be triggered.

In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Load L1's TSC multiplier based on L1 state, not L2 state When emulating nested VM-Exit, load L1's TSC multiplier if L1's desired ratio doesn't match the current ratio, not if the ratio L1 is using for L2 diverges from the default. Functionally, the end result is the same as KVM will run L2 with L1's multiplier if L2's multiplier is the default, i.e. checking that L1's multiplier is loaded is equivalent to checking if L2 has a non-default multiplier. However, the assertion that TSC scaling is exposed to L1 is flawed, as userspace can trigger the WARN at will by writing the MSR and then updating guest CPUID to hide the feature (modifying guest CPUID is allowed anytime before KVM_RUN). E.g. hacking KVM's state_test selftest to do vcpu_set_msr(vcpu, MSR_AMD64_TSC_RATIO, 0); vcpu_clear_cpuid_feature(vcpu, X86_FEATURE_TSCRATEMSR); after restoring state in a new VM+vCPU yields an endless supply of: ------------[ cut here ]------------ WARNING: CPU: 10 PID: 206939 at arch/x86/kvm/svm/nested.c:1105 nested_svm_vmexit+0x6af/0x720 [kvm_amd] Call Trace: nested_svm_exit_handled+0x102/0x1f0 [kvm_amd] svm_handle_exit+0xb9/0x180 [kvm_amd] kvm_arch_vcpu_ioctl_run+0x1eab/0x2570 [kvm] kvm_vcpu_ioctl+0x4c9/0x5b0 [kvm] ? trace_hardirqs_off+0x4d/0xa0 __se_sys_ioctl+0x7a/0xc0 __x64_sys_ioctl+0x21/0x30 do_syscall_64+0x41/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Unlike the nested VMRUN path, hoisting the svm->tsc_scaling_enabled check into the if-statement is wrong as KVM needs to ensure L1's multiplier is loaded in the above scenario. Alternatively, the WARN_ON() could simply be deleted, but that would make KVM's behavior even more subtle, e.g. it's not immediately obvious why it's safe to write MSR_AMD64_TSC_RATIO when checking only tsc_ratio_msr.

In the Linux kernel, the following vulnerability has been resolved: sched/fair: Don't balance task to its current running CPU We've run into the case that the balancer tries to balance a migration disabled task and trigger the warning in set_task_cpu() like below: ------------[ cut here ]------------ WARNING: CPU: 7 PID: 0 at kernel/sched/core.c:3115 set_task_cpu+0x188/0x240 Modules linked in: hclgevf xt_CHECKSUM ipt_REJECT nf_reject_ipv4 <...snip> CPU: 7 PID: 0 Comm: swapper/7 Kdump: loaded Tainted: G O 6.1.0-rc4+ #1 Hardware name: Huawei TaiShan 2280 V2/BC82AMDC, BIOS 2280-V2 CS V5.B221.01 12/09/2021 pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : set_task_cpu+0x188/0x240 lr : load_balance+0x5d0/0xc60 sp : ffff80000803bc70 x29: ffff80000803bc70 x28: ffff004089e190e8 x27: ffff004089e19040 x26: ffff007effcabc38 x25: 0000000000000000 x24: 0000000000000001 x23: ffff80000803be84 x22: 000000000000000c x21: ffffb093e79e2a78 x20: 000000000000000c x19: ffff004089e19040 x18: 0000000000000000 x17: 0000000000001fad x16: 0000000000000030 x15: 0000000000000000 x14: 0000000000000003 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000001 x10: 0000000000000400 x9 : ffffb093e4cee530 x8 : 00000000fffffffe x7 : 0000000000ce168a x6 : 000000000000013e x5 : 00000000ffffffe1 x4 : 0000000000000001 x3 : 0000000000000b2a x2 : 0000000000000b2a x1 : ffffb093e6d6c510 x0 : 0000000000000001 Call trace: set_task_cpu+0x188/0x240 load_balance+0x5d0/0xc60 rebalance_domains+0x26c/0x380 _nohz_idle_balance.isra.0+0x1e0/0x370 run_rebalance_domains+0x6c/0x80 __do_softirq+0x128/0x3d8 ____do_softirq+0x18/0x24 call_on_irq_stack+0x2c/0x38 do_softirq_own_stack+0x24/0x3c __irq_exit_rcu+0xcc/0xf4 irq_exit_rcu+0x18/0x24 el1_interrupt+0x4c/0xe4 el1h_64_irq_handler+0x18/0x2c el1h_64_irq+0x74/0x78 arch_cpu_idle+0x18/0x4c default_idle_call+0x58/0x194 do_idle+0x244/0x2b0 cpu_startup_entry+0x30/0x3c secondary_start_kernel+0x14c/0x190 __secondary_switched+0xb0/0xb4 ---[ end trace 0000000000000000 ]--- Further investigation shows that the warning is superfluous, the migration disabled task is just going to be migrated to its current running CPU. This is because that on load balance if the dst_cpu is not allowed by the task, we'll re-select a new_dst_cpu as a candidate. If no task can be balanced to dst_cpu we'll try to balance the task to the new_dst_cpu instead. In this case when the migration disabled task is not on CPU it only allows to run on its current CPU, load balance will select its current CPU as new_dst_cpu and later triggers the warning above. The new_dst_cpu is chosen from the env->dst_grpmask. Currently it contains CPUs in sched_group_span() and if we have overlapped groups it's possible to run into this case. This patch makes env->dst_grpmask of group_balance_mask() which exclude any CPUs from the busiest group and solve the issue. For balancing in a domain with no overlapped groups the behaviour keeps same as before.

In the Linux kernel, the following vulnerability has been resolved: nubus: Partially revert proc_create_single_data() conversion The conversion to proc_create_single_data() introduced a regression whereby reading a file in /proc/bus/nubus results in a seg fault: # grep -r . /proc/bus/nubus/e/ Data read fault at 0x00000020 in Super Data (pc=0x1074c2) BAD KERNEL BUSERR Oops: 00000000 Modules linked in: PC: [<001074c2>] PDE_DATA+0xc/0x16 SR: 2010 SP: 38284958 a2: 01152370 d0: 00000001 d1: 01013000 d2: 01002790 d3: 00000000 d4: 00000001 d5: 0008ce2e a0: 00000000 a1: 00222a40 Process grep (pid: 45, task=142f8727) Frame format=B ssw=074d isc=2008 isb=4e5e daddr=00000020 dobuf=01199e70 baddr=001074c8 dibuf=ffffffff ver=f Stack from 01199e48: 01199e70 00222a58 01002790 00000000 011a3000 01199eb0 015000c0 00000000 00000000 01199ec0 01199ec0 000d551a 011a3000 00000001 00000000 00018000 d003f000 00000003 00000001 0002800d 01052840 01199fa8 c01f8000 00000000 00000029 0b532b80 00000000 00000000 00000029 0b532b80 01199ee4 00103640 011198c0 d003f000 00018000 01199fa8 00000000 011198c0 00000000 01199f4c 000b3344 011198c0 d003f000 00018000 01199fa8 00000000 00018000 011198c0 Call Trace: [<00222a58>] nubus_proc_rsrc_show+0x18/0xa0 [<000d551a>] seq_read+0xc4/0x510 [<00018000>] fp_fcos+0x2/0x82 [<0002800d>] __sys_setreuid+0x115/0x1c6 [<00103640>] proc_reg_read+0x5c/0xb0 [<00018000>] fp_fcos+0x2/0x82 [<000b3344>] __vfs_read+0x2c/0x13c [<00018000>] fp_fcos+0x2/0x82 [<00018000>] fp_fcos+0x2/0x82 [<000b8aa2>] sys_statx+0x60/0x7e [<000b34b6>] vfs_read+0x62/0x12a [<00018000>] fp_fcos+0x2/0x82 [<00018000>] fp_fcos+0x2/0x82 [<000b39c2>] ksys_read+0x48/0xbe [<00018000>] fp_fcos+0x2/0x82 [<000b3a4e>] sys_read+0x16/0x1a [<00018000>] fp_fcos+0x2/0x82 [<00002b84>] syscall+0x8/0xc [<00018000>] fp_fcos+0x2/0x82 [<0000c016>] not_ext+0xa/0x18 Code: 4e5e 4e75 4e56 0000 206e 0008 2068 ffe8 <2068> 0020 2008 4e5e 4e75 4e56 0000 2f0b 206e 0008 2068 0004 2668 0020 206b ffe8 Disabling lock debugging due to kernel taint Segmentation fault The proc_create_single_data() conversion does not work because single_open(file, nubus_proc_rsrc_show, PDE_DATA(inode)) is not equivalent to the original code.

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dsi: Add missing check for alloc_ordered_workqueue Add check for the return value of alloc_ordered_workqueue as it may return NULL pointer and cause NULL pointer dereference. Patchwork: https://patchwork.freedesktop.org/patch/517646/

In the Linux kernel, the following vulnerability has been resolved: watchdog: Fix kmemleak in watchdog_cdev_register kmemleak reports memory leaks in watchdog_dev_register, as follows: unreferenced object 0xffff888116233000 (size 2048): comm ""modprobe"", pid 28147, jiffies 4353426116 (age 61.741s) hex dump (first 32 bytes): 80 fa b9 05 81 88 ff ff 08 30 23 16 81 88 ff ff .........0#..... 08 30 23 16 81 88 ff ff 00 00 00 00 00 00 00 00 .0#............. backtrace: [<000000007f001ffd>] __kmem_cache_alloc_node+0x157/0x220 [<000000006a389304>] kmalloc_trace+0x21/0x110 [<000000008d640eea>] watchdog_dev_register+0x4e/0x780 [watchdog] [<0000000053c9f248>] __watchdog_register_device+0x4f0/0x680 [watchdog] [<00000000b2979824>] watchdog_register_device+0xd2/0x110 [watchdog] [<000000001f730178>] 0xffffffffc10880ae [<000000007a1a8bcc>] do_one_initcall+0xcb/0x4d0 [<00000000b98be325>] do_init_module+0x1ca/0x5f0 [<0000000046d08e7c>] load_module+0x6133/0x70f0 ... unreferenced object 0xffff888105b9fa80 (size 16): comm ""modprobe"", pid 28147, jiffies 4353426116 (age 61.741s) hex dump (first 16 bytes): 77 61 74 63 68 64 6f 67 31 00 b9 05 81 88 ff ff watchdog1....... backtrace: [<000000007f001ffd>] __kmem_cache_alloc_node+0x157/0x220 [<00000000486ab89b>] __kmalloc_node_track_caller+0x44/0x1b0 [<000000005a39aab0>] kvasprintf+0xb5/0x140 [<0000000024806f85>] kvasprintf_const+0x55/0x180 [<000000009276cb7f>] kobject_set_name_vargs+0x56/0x150 [<00000000a92e820b>] dev_set_name+0xab/0xe0 [<00000000cec812c6>] watchdog_dev_register+0x285/0x780 [watchdog] [<0000000053c9f248>] __watchdog_register_device+0x4f0/0x680 [watchdog] [<00000000b2979824>] watchdog_register_device+0xd2/0x110 [watchdog] [<000000001f730178>] 0xffffffffc10880ae [<000000007a1a8bcc>] do_one_initcall+0xcb/0x4d0 [<00000000b98be325>] do_init_module+0x1ca/0x5f0 [<0000000046d08e7c>] load_module+0x6133/0x70f0 ... The reason is that put_device is not be called if cdev_device_add fails and wdd->id != 0. watchdog_cdev_register wd_data = kzalloc [1] err = dev_set_name [2] .. err = cdev_device_add if (err) { if (wdd->id == 0) { // wdd->id != 0 .. } return err; // [1],[2] would be leaked To fix it, call put_device in all wdd->id cases.

In the Linux kernel, the following vulnerability has been resolved: drm/tests: helpers: Avoid a driver uaf when using __drm_kunit_helper_alloc_drm_device() the driver may be dereferenced by device-managed resources up until the device is freed, which is typically later than the kunit-managed resource code frees it. Fix this by simply make the driver device-managed as well. In short, the sequence leading to the UAF is as follows: INIT: Code allocates a struct device as a kunit-managed resource. Code allocates a drm driver as a kunit-managed resource. Code allocates a drm device as a device-managed resource. EXIT: Kunit resource cleanup frees the drm driver Kunit resource cleanup puts the struct device, which starts a device-managed resource cleanup device-managed cleanup calls drm_dev_put() drm_dev_put() dereferences the (now freed) drm driver -> Boom. Related KASAN message: [55272.551542] ================================================================== [55272.551551] BUG: KASAN: slab-use-after-free in drm_dev_put.part.0+0xd4/0xe0 [drm] [55272.551603] Read of size 8 at addr ffff888127502828 by task kunit_try_catch/10353 [55272.551612] CPU: 4 PID: 10353 Comm: kunit_try_catch Tainted: G U N 6.5.0-rc7+ #155 [55272.551620] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 0403 01/26/2021 [55272.551626] Call Trace: [55272.551629] <TASK> [55272.551633] dump_stack_lvl+0x57/0x90 [55272.551639] print_report+0xcf/0x630 [55272.551645] ? _raw_spin_lock_irqsave+0x5f/0x70 [55272.551652] ? drm_dev_put.part.0+0xd4/0xe0 [drm] [55272.551694] kasan_report+0xd7/0x110 [55272.551699] ? drm_dev_put.part.0+0xd4/0xe0 [drm] [55272.551742] drm_dev_put.part.0+0xd4/0xe0 [drm] [55272.551783] devres_release_all+0x15d/0x1f0 [55272.551790] ? __pfx_devres_release_all+0x10/0x10 [55272.551797] device_unbind_cleanup+0x16/0x1a0 [55272.551802] device_release_driver_internal+0x3e5/0x540 [55272.551808] ? kobject_put+0x5d/0x4b0 [55272.551814] bus_remove_device+0x1f1/0x3f0 [55272.551819] device_del+0x342/0x910 [55272.551826] ? __pfx_device_del+0x10/0x10 [55272.551830] ? lock_release+0x339/0x5e0 [55272.551836] ? kunit_remove_resource+0x128/0x290 [kunit] [55272.551845] ? __pfx_lock_release+0x10/0x10 [55272.551851] platform_device_del.part.0+0x1f/0x1e0 [55272.551856] ? _raw_spin_unlock_irqrestore+0x30/0x60 [55272.551863] kunit_remove_resource+0x195/0x290 [kunit] [55272.551871] ? _raw_spin_unlock_irqrestore+0x30/0x60 [55272.551877] kunit_cleanup+0x78/0x120 [kunit] [55272.551885] ? __kthread_parkme+0xc1/0x1f0 [55272.551891] ? __pfx_kunit_try_run_case_cleanup+0x10/0x10 [kunit] [55272.551900] ? __pfx_kunit_generic_run_threadfn_adapter+0x10/0x10 [kunit] [55272.551909] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit] [55272.551919] kthread+0x2e7/0x3c0 [55272.551924] ? __pfx_kthread+0x10/0x10 [55272.551929] ret_from_fork+0x2d/0x70 [55272.551935] ? __pfx_kthread+0x10/0x10 [55272.551940] ret_from_fork_asm+0x1b/0x30 [55272.551948] </TASK> [55272.551953] Allocated by task 10351: [55272.551956] kasan_save_stack+0x1c/0x40 [55272.551962] kasan_set_track+0x21/0x30 [55272.551966] __kasan_kmalloc+0x8b/0x90 [55272.551970] __kmalloc+0x5e/0x160 [55272.551976] kunit_kmalloc_array+0x1c/0x50 [kunit] [55272.551984] drm_exec_test_init+0xfa/0x2c0 [drm_exec_test] [55272.551991] kunit_try_run_case+0xdd/0x250 [kunit] [55272.551999] kunit_generic_run_threadfn_adapter+0x4a/0x90 [kunit] [55272.552008] kthread+0x2e7/0x3c0 [55272.552012] ret_from_fork+0x2d/0x70 [55272.552017] ret_from_fork_asm+0x1b/0x30 [55272.552024] Freed by task 10353: [55272.552027] kasan_save_stack+0x1c/0x40 [55272.552032] kasan_set_track+0x21/0x30 [55272.552036] kasan_save_free_info+0x27/0x40 [55272.552041] __kasan_slab_free+0x106/0x180 [55272.552046] slab_free_freelist_hook+0xb3/0x160 [55272.552051] __kmem_cache_free+0xb2/0x290 [55272.552056] kunit_remove_resource+0x195/0x290 [kunit] [55272.552064] kunit_cleanup+0x7 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/msm/mdp5: Add check for kzalloc As kzalloc may fail and return NULL pointer, it should be better to check the return value in order to avoid the NULL pointer dereference. Patchwork: https://patchwork.freedesktop.org/patch/514154/

In the Linux kernel, the following vulnerability has been resolved: cifs: fix DFS traversal oops without CONFIG_CIFS_DFS_UPCALL When compiled with CONFIG_CIFS_DFS_UPCALL disabled, cifs_dfs_d_automount is NULL. cifs.ko logic for mapping CIFS_FATTR_DFS_REFERRAL attributes to S_AUTOMOUNT and corresponding dentry flags is retained regardless of CONFIG_CIFS_DFS_UPCALL, leading to a NULL pointer dereference in VFS follow_automount() when traversing a DFS referral link: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... Call Trace: <TASK> __traverse_mounts+0xb5/0x220 ? cifs_revalidate_mapping+0x65/0xc0 [cifs] step_into+0x195/0x610 ? lookup_fast+0xe2/0xf0 path_lookupat+0x64/0x140 filename_lookup+0xc2/0x140 ? __create_object+0x299/0x380 ? kmem_cache_alloc+0x119/0x220 ? user_path_at_empty+0x31/0x50 user_path_at_empty+0x31/0x50 __x64_sys_chdir+0x2a/0xd0 ? exit_to_user_mode_prepare+0xca/0x100 do_syscall_64+0x42/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc This fix adds an inline cifs_dfs_d_automount() {return -EREMOTE} handler when CONFIG_CIFS_DFS_UPCALL is disabled. An alternative would be to avoid flagging S_AUTOMOUNT, etc. without CONFIG_CIFS_DFS_UPCALL. This approach was chosen as it provides more control over the error path.

In the Linux kernel, the following vulnerability has been resolved: btrfs: set_page_extent_mapped after read_folio in btrfs_cont_expand While trying to get the subpage blocksize tests running, I hit the following panic on generic/476 assertion failed: PagePrivate(page) && page->private, in fs/btrfs/subpage.c:229 kernel BUG at fs/btrfs/subpage.c:229! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP CPU: 1 PID: 1453 Comm: fsstress Not tainted 6.4.0-rc7+ #12 Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20230301gitf80f052277c8-26.fc38 03/01/2023 pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : btrfs_subpage_assert+0xbc/0xf0 lr : btrfs_subpage_assert+0xbc/0xf0 Call trace: btrfs_subpage_assert+0xbc/0xf0 btrfs_subpage_clear_checked+0x38/0xc0 btrfs_page_clear_checked+0x48/0x98 btrfs_truncate_block+0x5d0/0x6a8 btrfs_cont_expand+0x5c/0x528 btrfs_write_check.isra.0+0xf8/0x150 btrfs_buffered_write+0xb4/0x760 btrfs_do_write_iter+0x2f8/0x4b0 btrfs_file_write_iter+0x1c/0x30 do_iter_readv_writev+0xc8/0x158 do_iter_write+0x9c/0x210 vfs_iter_write+0x24/0x40 iter_file_splice_write+0x224/0x390 direct_splice_actor+0x38/0x68 splice_direct_to_actor+0x12c/0x260 do_splice_direct+0x90/0xe8 generic_copy_file_range+0x50/0x90 vfs_copy_file_range+0x29c/0x470 __arm64_sys_copy_file_range+0xcc/0x498 invoke_syscall.constprop.0+0x80/0xd8 do_el0_svc+0x6c/0x168 el0_svc+0x50/0x1b0 el0t_64_sync_handler+0x114/0x120 el0t_64_sync+0x194/0x198 This happens because during btrfs_cont_expand we'll get a page, set it as mapped, and if it's not Uptodate we'll read it. However between the read and re-locking the page we could have called release_folio() on the page, but left the page in the file mapping. release_folio() can clear the page private, and thus further down we blow up when we go to modify the subpage bits. Fix this by putting the set_page_extent_mapped() after the read. This is safe because read_folio() will call set_page_extent_mapped() before it does the read, and then if we clear page private but leave it on the mapping we're completely safe re-setting set_page_extent_mapped(). With this patch I can now run generic/476 without panicing.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: pcie: fix NULL pointer dereference in iwl_pcie_irq_rx_msix_handler() rxq can be NULL only when trans_pcie->rxq is NULL and entry->entry is zero. For the case when entry->entry is not equal to 0, rxq won't be NULL even if trans_pcie->rxq is NULL. Modify checker to check for trans_pcie->rxq.

In the Linux kernel, the following vulnerability has been resolved: VMCI: check context->notify_page after call to get_user_pages_fast() to avoid GPF The call to get_user_pages_fast() in vmci_host_setup_notify() can return NULL context->notify_page causing a GPF. To avoid GPF check if context->notify_page == NULL and return error if so. general protection fault, probably for non-canonical address 0xe0009d1000000060: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: maybe wild-memory-access in range [0x0005088000000300- 0x0005088000000307] CPU: 2 PID: 26180 Comm: repro_34802241 Not tainted 6.1.0-rc4 #1 Hardware name: Red Hat KVM, BIOS 1.15.0-2.module+el8.6.0 04/01/2014 RIP: 0010:vmci_ctx_check_signal_notify+0x91/0xe0 Call Trace: <TASK> vmci_host_unlocked_ioctl+0x362/0x1f40 __x64_sys_ioctl+0x1a1/0x230 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd

In the Linux kernel, the following vulnerability has been resolved: firmware: arm_ffa: Fix FFA device names for logical partitions Each physical partition can provide multiple services each with UUID. Each such service can be presented as logical partition with a unique combination of VM ID and UUID. The number of distinct UUID in a system will be less than or equal to the number of logical partitions. However, currently it fails to register more than one logical partition or service within a physical partition as the device name contains only VM ID while both VM ID and UUID are maintained in the partition information. The kernel complains with the below message: | sysfs: cannot create duplicate filename '/devices/arm-ffa-8001' | CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.3.0-rc7 #8 | Hardware name: FVP Base RevC (DT) | Call trace: | dump_backtrace+0xf8/0x118 | show_stack+0x18/0x24 | dump_stack_lvl+0x50/0x68 | dump_stack+0x18/0x24 | sysfs_create_dir_ns+0xe0/0x13c | kobject_add_internal+0x220/0x3d4 | kobject_add+0x94/0x100 | device_add+0x144/0x5d8 | device_register+0x20/0x30 | ffa_device_register+0x88/0xd8 | ffa_setup_partitions+0x108/0x1b8 | ffa_init+0x2ec/0x3a4 | do_one_initcall+0xcc/0x240 | do_initcall_level+0x8c/0xac | do_initcalls+0x54/0x94 | do_basic_setup+0x1c/0x28 | kernel_init_freeable+0x100/0x16c | kernel_init+0x20/0x1a0 | ret_from_fork+0x10/0x20 | kobject_add_internal failed for arm-ffa-8001 with -EEXIST, don't try to | register things with the same name in the same directory. | arm_ffa arm-ffa: unable to register device arm-ffa-8001 err=-17 | ARM FF-A: ffa_setup_partitions: failed to register partition ID 0x8001 By virtue of being random enough to avoid collisions when generated in a distributed system, there is no way to compress UUID keys to the number of bits required to identify each. We can eliminate '-' in the name but it is not worth eliminating 4 bytes and add unnecessary logic for doing that. Also v1.0 doesn't provide the UUID of the partitions which makes it hard to use the same for the device name. So to keep it simple, let us alloc an ID using ida_alloc() and append the same to "arm-ffa" to make up a unique device name. Also stash the id value in ffa_dev to help freeing the ID later when the device is destroyed.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix possible underflow for displays with large vblank [Why] Underflow observed when using a display with a large vblank region and low refresh rate [How] Simplify calculation of vblank_nom Increase value for VBlankNomDefaultUS to 800us

In the Linux kernel, the following vulnerability has been resolved: cpufreq: qcom: fix writes in read-only memory region This commit fixes a kernel oops because of a write in some read-only memory: [ 9.068287] Unable to handle kernel write to read-only memory at virtual address ffff800009240ad8 ..snip.. [ 9.138790] Internal error: Oops: 9600004f [#1] PREEMPT SMP ..snip.. [ 9.269161] Call trace: [ 9.276271] __memcpy+0x5c/0x230 [ 9.278531] snprintf+0x58/0x80 [ 9.282002] qcom_cpufreq_msm8939_name_version+0xb4/0x190 [ 9.284869] qcom_cpufreq_probe+0xc8/0x39c ..snip.. The following line defines a pointer that point to a char buffer stored in read-only memory: char *pvs_name = "speedXX-pvsXX-vXX"; This pointer is meant to hold a template "speedXX-pvsXX-vXX" where the XX values get overridden by the qcom_cpufreq_krait_name_version function. Since the template is actually stored in read-only memory, when the function executes the following call we get an oops: snprintf(*pvs_name, sizeof("speedXX-pvsXX-vXX"), "speed%d-pvs%d-v%d", speed, pvs, pvs_ver); To fix this issue, we instead store the template name onto the stack by using the following syntax: char pvs_name_buffer[] = "speedXX-pvsXX-vXX"; Because the `pvs_name` needs to be able to be assigned to NULL, the template buffer is stored in the pvs_name_buffer and not under the pvs_name variable.

In the Linux kernel, the following vulnerability has been resolved: android: binder: stop saving a pointer to the VMA Do not record a pointer to a VMA outside of the mmap_lock for later use. This is unsafe and there are a number of failure paths *after* the recorded VMA pointer may be freed during setup. There is no callback to the driver to clear the saved pointer from generic mm code. Furthermore, the VMA pointer may become stale if any number of VMA operations end up freeing the VMA so saving it was fragile to being with. Instead, change the binder_alloc struct to record the start address of the VMA and use vma_lookup() to get the vma when needed. Add lockdep mmap_lock checks on updates to the vma pointer to ensure the lock is held and depend on that lock for synchronization of readers and writers - which was already the case anyways, so the smp_wmb()/smp_rmb() was not necessary. [[email protected]: fix drivers/android/binder_alloc_selftest.c]