CVE Feed

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid out-of-boundary access in devs.path - touch /mnt/f2fs/012345678901234567890123456789012345678901234567890123 - truncate -s $((1024*1024*1024)) \ /mnt/f2fs/012345678901234567890123456789012345678901234567890123 - touch /mnt/f2fs/file - truncate -s $((1024*1024*1024)) /mnt/f2fs/file - mkfs.f2fs /mnt/f2fs/012345678901234567890123456789012345678901234567890123 \ -c /mnt/f2fs/file - mount /mnt/f2fs/012345678901234567890123456789012345678901234567890123 \ /mnt/f2fs/loop [16937.192225] F2FS-fs (loop0): Mount Device [ 0]: /mnt/f2fs/012345678901234567890123456789012345678901234567890123\xff\x01, 511, 0 - 3ffff [16937.192268] F2FS-fs (loop0): Failed to find devices If device path length equals to MAX_PATH_LEN, sbi->devs.path[] may not end up w/ null character due to path array is fully filled, So accidently, fields locate after path[] may be treated as part of device path, result in parsing wrong device path. struct f2fs_dev_info { ... char path[MAX_PATH_LEN]; ... }; Let's add one byte space for sbi->devs.path[] to store null character of device path string.

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: Add missing lock in cfg80211_check_and_end_cac() Callers of wdev_chandef() must hold the wiphy mutex. But the worker cfg80211_propagate_cac_done_wk() never takes the lock. Which triggers the warning below with the mesh_peer_connected_dfs test from hostapd and not (yet) released mac80211 code changes: WARNING: CPU: 0 PID: 495 at net/wireless/chan.c:1552 wdev_chandef+0x60/0x165 Modules linked in: CPU: 0 UID: 0 PID: 495 Comm: kworker/u4:2 Not tainted 6.14.0-rc5-wt-g03960e6f9d47 #33 13c287eeabfe1efea01c0bcc863723ab082e17cf Workqueue: cfg80211 cfg80211_propagate_cac_done_wk Stack: 00000000 00000001 ffffff00 6093267c 00000000 6002ec30 6d577c50 60037608 00000000 67e8d108 6063717b 00000000 Call Trace: [<6002ec30>] ? _printk+0x0/0x98 [<6003c2b3>] show_stack+0x10e/0x11a [<6002ec30>] ? _printk+0x0/0x98 [<60037608>] dump_stack_lvl+0x71/0xb8 [<6063717b>] ? wdev_chandef+0x60/0x165 [<6003766d>] dump_stack+0x1e/0x20 [<6005d1b7>] __warn+0x101/0x20f [<6005d3a8>] warn_slowpath_fmt+0xe3/0x15d [<600b0c5c>] ? mark_lock.part.0+0x0/0x4ec [<60751191>] ? __this_cpu_preempt_check+0x0/0x16 [<600b11a2>] ? mark_held_locks+0x5a/0x6e [<6005d2c5>] ? warn_slowpath_fmt+0x0/0x15d [<60052e53>] ? unblock_signals+0x3a/0xe7 [<60052f2d>] ? um_set_signals+0x2d/0x43 [<60751191>] ? __this_cpu_preempt_check+0x0/0x16 [<607508b2>] ? lock_is_held_type+0x207/0x21f [<6063717b>] wdev_chandef+0x60/0x165 [<605f89b4>] regulatory_propagate_dfs_state+0x247/0x43f [<60052f00>] ? um_set_signals+0x0/0x43 [<605e6bfd>] cfg80211_propagate_cac_done_wk+0x3a/0x4a [<6007e460>] process_scheduled_works+0x3bc/0x60e [<6007d0ec>] ? move_linked_works+0x4d/0x81 [<6007d120>] ? assign_work+0x0/0xaa [<6007f81f>] worker_thread+0x220/0x2dc [<600786ef>] ? set_pf_worker+0x0/0x57 [<60087c96>] ? to_kthread+0x0/0x43 [<6008ab3c>] kthread+0x2d3/0x2e2 [<6007f5ff>] ? worker_thread+0x0/0x2dc [<6006c05b>] ? calculate_sigpending+0x0/0x56 [<6003b37d>] new_thread_handler+0x4a/0x64 irq event stamp: 614611 hardirqs last enabled at (614621): [<00000000600bc96b>] __up_console_sem+0x82/0xaf hardirqs last disabled at (614630): [<00000000600bc92c>] __up_console_sem+0x43/0xaf softirqs last enabled at (614268): [<00000000606c55c6>] __ieee80211_wake_queue+0x933/0x985 softirqs last disabled at (614266): [<00000000606c52d6>] __ieee80211_wake_queue+0x643/0x985

In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_nfacct: don't assume acct name is null-terminated BUG: KASAN: slab-out-of-bounds in .. lib/vsprintf.c:721 Read of size 1 at addr ffff88801eac95c8 by task syz-executor183/5851 [..] string+0x231/0x2b0 lib/vsprintf.c:721 vsnprintf+0x739/0xf00 lib/vsprintf.c:2874 [..] nfacct_mt_checkentry+0xd2/0xe0 net/netfilter/xt_nfacct.c:41 xt_check_match+0x3d1/0xab0 net/netfilter/x_tables.c:523 nfnl_acct_find_get() handles non-null input, but the error printk relied on its presence.

In the Linux kernel, the following vulnerability has been resolved: net/packet: fix a race in packet_set_ring() and packet_notifier() When packet_set_ring() releases po->bind_lock, another thread can run packet_notifier() and process an NETDEV_UP event. This race and the fix are both similar to that of commit 15fe076edea7 ("net/packet: fix a race in packet_bind() and packet_notifier()"). There too the packet_notifier NETDEV_UP event managed to run while a po->bind_lock critical section had to be temporarily released. And the fix was similarly to temporarily set po->num to zero to keep the socket unhooked until the lock is retaken. The po->bind_lock in packet_set_ring and packet_notifier precede the introduction of git history.

In the Linux kernel, the following vulnerability has been resolved: f2fs: compress: fix UAF of f2fs_inode_info in f2fs_free_dic The decompress_io_ctx may be released asynchronously after I/O completion. If this file is deleted immediately after read, and the kworker of processing post_read_wq has not been executed yet due to high workloads, It is possible that the inode(f2fs_inode_info) is evicted and freed before it is used f2fs_free_dic. The UAF case as below: Thread A Thread B - f2fs_decompress_end_io - f2fs_put_dic - queue_work add free_dic work to post_read_wq - do_unlink - iput - evict - call_rcu This file is deleted after read. Thread C kworker to process post_read_wq - rcu_do_batch - f2fs_free_inode - kmem_cache_free inode is freed by rcu - process_scheduled_works - f2fs_late_free_dic - f2fs_free_dic - f2fs_release_decomp_mem read (dic->inode)->i_compress_algorithm This patch store compress_algorithm and sbi in dic to avoid inode UAF. In addition, the previous solution is deprecated in [1] may cause system hang. [1] https://lore.kernel.org/all/[email protected]

In the Linux kernel, the following vulnerability has been resolved: arm64/entry: Mask DAIF in cpu_switch_to(), call_on_irq_stack() `cpu_switch_to()` and `call_on_irq_stack()` manipulate SP to change to different stacks along with the Shadow Call Stack if it is enabled. Those two stack changes cannot be done atomically and both functions can be interrupted by SErrors or Debug Exceptions which, though unlikely, is very much broken : if interrupted, we can end up with mismatched stacks and Shadow Call Stack leading to clobbered stacks. In `cpu_switch_to()`, it can happen when SP_EL0 points to the new task, but x18 stills points to the old task's SCS. When the interrupt handler tries to save the task's SCS pointer, it will save the old task SCS pointer (x18) into the new task struct (pointed to by SP_EL0), clobbering it. In `call_on_irq_stack()`, it can happen when switching from the task stack to the IRQ stack and when switching back. In both cases, we can be interrupted when the SCS pointer points to the IRQ SCS, but SP points to the task stack. The nested interrupt handler pushes its return addresses on the IRQ SCS. It then detects that SP points to the task stack, calls `call_on_irq_stack()` and clobbers the task SCS pointer with the IRQ SCS pointer, which it will also use ! This leads to tasks returning to addresses on the wrong SCS, or even on the IRQ SCS, triggering kernel panics via CONFIG_VMAP_STACK or FPAC if enabled. This is possible on a default config, but unlikely. However, when enabling CONFIG_ARM64_PSEUDO_NMI, DAIF is unmasked and instead the GIC is responsible for filtering what interrupts the CPU should receive based on priority. Given the goal of emulating NMIs, pseudo-NMIs can be received by the CPU even in `cpu_switch_to()` and `call_on_irq_stack()`, possibly *very* frequently depending on the system configuration and workload, leading to unpredictable kernel panics. Completely mask DAIF in `cpu_switch_to()` and restore it when returning. Do the same in `call_on_irq_stack()`, but restore and mask around the branch. Mask DAIF even if CONFIG_SHADOW_CALL_STACK is not enabled for consistency of behaviour between all configurations. Introduce and use an assembly macro for saving and masking DAIF, as the existing one saves but only masks IF.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: sar: drop lockdep assertion in rtw89_set_sar_from_acpi The following assertion is triggered on the rtw89 driver startup. It looks meaningless to hold wiphy lock on the early init stage so drop the assertion. WARNING: CPU: 7 PID: 629 at drivers/net/wireless/realtek/rtw89/sar.c:502 rtw89_set_sar_from_acpi+0x365/0x4d0 [rtw89_core] CPU: 7 UID: 0 PID: 629 Comm: (udev-worker) Not tainted 6.15.0+ #29 PREEMPT(lazy) Hardware name: LENOVO 21D0/LNVNB161216, BIOS J6CN50WW 09/27/2024 RIP: 0010:rtw89_set_sar_from_acpi+0x365/0x4d0 [rtw89_core] Call Trace: <TASK> rtw89_sar_init+0x68/0x2c0 [rtw89_core] rtw89_core_init+0x188e/0x1e50 [rtw89_core] rtw89_pci_probe+0x530/0xb50 [rtw89_pci] local_pci_probe+0xd9/0x190 pci_call_probe+0x183/0x540 pci_device_probe+0x171/0x2c0 really_probe+0x1e1/0x890 __driver_probe_device+0x18c/0x390 driver_probe_device+0x4a/0x120 __driver_attach+0x1a0/0x530 bus_for_each_dev+0x10b/0x190 bus_add_driver+0x2eb/0x540 driver_register+0x1a3/0x3a0 do_one_initcall+0xd5/0x450 do_init_module+0x2cc/0x8f0 init_module_from_file+0xe1/0x150 idempotent_init_module+0x226/0x760 __x64_sys_finit_module+0xcd/0x150 do_syscall_64+0x94/0x380 entry_SYSCALL_64_after_hwframe+0x76/0x7e Found by Linux Verification Center (linuxtesting.org).

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: Fix potential NULL dereference on kmalloc failure Avoid potential NULL pointer dereference by checking the return value of kmalloc and handling allocation failure properly.

In the Linux kernel, the following vulnerability has been resolved: zloop: fix KASAN use-after-free of tag set When a zoned loop device, or zloop device, is removed, KASAN enabled kernel reports "BUG KASAN use-after-free" in blk_mq_free_tag_set(). The BUG happens because zloop_ctl_remove() calls put_disk(), which invokes zloop_free_disk(). The zloop_free_disk() frees the memory allocated for the zlo pointer. However, after the memory is freed, zloop_ctl_remove() calls blk_mq_free_tag_set(&zlo->tag_set), which accesses the freed zlo. Hence the KASAN use-after-free. zloop_ctl_remove() put_disk(zlo->disk) put_device() kobject_put() ... zloop_free_disk() kvfree(zlo) blk_mq_free_tag_set(&zlo->tag_set) To avoid the BUG, move the call to blk_mq_free_tag_set(&zlo->tag_set) from zloop_ctl_remove() into zloop_free_disk(). This ensures that the tag_set is freed before the call to kvfree(zlo).

In the Linux kernel, the following vulnerability has been resolved: i2c: qup: jump out of the loop in case of timeout Original logic only sets the return value but doesn't jump out of the loop if the bus is kept active by a client. This is not expected. A malicious or buggy i2c client can hang the kernel in this case and should be avoided. This is observed during a long time test with a PCA953x GPIO extender. Fix it by changing the logic to not only sets the return value, but also jumps out of the loop and return to the caller with -ETIMEDOUT.

In the Linux kernel, the following vulnerability has been resolved: can: netlink: can_changelink(): fix NULL pointer deref of struct can_priv::do_set_mode Andrei Lalaev reported a NULL pointer deref when a CAN device is restarted from Bus Off and the driver does not implement the struct can_priv::do_set_mode callback. There are 2 code path that call struct can_priv::do_set_mode: - directly by a manual restart from the user space, via can_changelink() - delayed automatic restart after bus off (deactivated by default) To prevent the NULL pointer deference, refuse a manual restart or configure the automatic restart delay in can_changelink() and report the error via extack to user space. As an additional safety measure let can_restart() return an error if can_priv::do_set_mode is not set instead of dereferencing it unchecked.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: reject invalid file types when reading inodes To prevent inodes with invalid file types from tripping through the vfs and causing malfunctions or assertion failures, add a missing sanity check when reading an inode from a block device. If the file type is not valid, treat it as a filesystem error.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: reject TDLS operations when station is not associated syzbot triggered a WARN in ieee80211_tdls_oper() by sending NL80211_TDLS_ENABLE_LINK immediately after NL80211_CMD_CONNECT, before association completed and without prior TDLS setup. This left internal state like sdata->u.mgd.tdls_peer uninitialized, leading to a WARN_ON() in code paths that assumed it was valid. Reject the operation early if not in station mode or not associated.

In the Linux kernel, the following vulnerability has been resolved: PCI: pnv_php: Fix surprise plug detection and recovery The existing PowerNV hotplug code did not handle surprise plug events correctly, leading to a complete failure of the hotplug system after device removal and a required reboot to detect new devices. This comes down to two issues: 1) When a device is surprise removed, often the bridge upstream port will cause a PE freeze on the PHB. If this freeze is not cleared, the MSI interrupts from the bridge hotplug notification logic will not be received by the kernel, stalling all plug events on all slots associated with the PE. 2) When a device is removed from a slot, regardless of surprise or programmatic removal, the associated PHB/PE ls left frozen. If this freeze is not cleared via a fundamental reset, skiboot is unable to clear the freeze and cannot retrain / rescan the slot. This also requires a reboot to clear the freeze and redetect the device in the slot. Issue the appropriate unfreeze and rescan commands on hotplug events, and don't oops on hotplug if pci_bus_to_OF_node() returns NULL. [bhelgaas: tidy comments]

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to trigger foreground gc during f2fs_map_blocks() in lfs mode w/ "mode=lfs" mount option, generic/299 will cause system panic as below: ------------[ cut here ]------------ kernel BUG at fs/f2fs/segment.c:2835! Call Trace: <TASK> f2fs_allocate_data_block+0x6f4/0xc50 f2fs_map_blocks+0x970/0x1550 f2fs_iomap_begin+0xb2/0x1e0 iomap_iter+0x1d6/0x430 __iomap_dio_rw+0x208/0x9a0 f2fs_file_write_iter+0x6b3/0xfa0 aio_write+0x15d/0x2e0 io_submit_one+0x55e/0xab0 __x64_sys_io_submit+0xa5/0x230 do_syscall_64+0x84/0x2f0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0010:new_curseg+0x70f/0x720 The root cause of we run out-of-space is: in f2fs_map_blocks(), f2fs may trigger foreground gc only if it allocates any physical block, it will be a little bit later when there is multiple threads writing data w/ aio/dio/bufio method in parallel, since we always use OPU in lfs mode, so f2fs_map_blocks() does block allocations aggressively. In order to fix this issue, let's give a chance to trigger foreground gc in prior to block allocation in f2fs_map_blocks().

In the Linux kernel, the following vulnerability has been resolved: clk: spacemit: mark K1 pll1_d8 as critical The pll1_d8 clock is enabled by the boot loader, and is ultimately a parent for numerous clocks, including those used by APB and AXI buses. Guodong Xu discovered that this clock got disabled while responding to getting -EPROBE_DEFER when requesting a reset controller. The needed clock (CLK_DMA, along with its parents) had already been enabled. To respond to the probe deferral return, the CLK_DMA clock was disabled, and this led to parent clocks also reducing their enable count. When the enable count for pll1_d8 was decremented it became 0, which caused it to be disabled. This led to a system hang. Marking that clock critical resolves this by preventing it from being disabled. Define a new macro CCU_FACTOR_GATE_DEFINE() to allow clock flags to be supplied for a CCU_FACTOR_GATE clock.

In the Linux kernel, the following vulnerability has been resolved: ipv6: add a retry logic in net6_rt_notify() inet6_rt_notify() can be called under RCU protection only. This means the route could be changed concurrently and rt6_fill_node() could return -EMSGSIZE. Re-size the skb when this happens and retry, removing one WARN_ON() that syzbot was able to trigger: WARNING: CPU: 3 PID: 6291 at net/ipv6/route.c:6342 inet6_rt_notify+0x475/0x4b0 net/ipv6/route.c:6342 Modules linked in: CPU: 3 UID: 0 PID: 6291 Comm: syz.0.77 Not tainted 6.16.0-rc7-syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:inet6_rt_notify+0x475/0x4b0 net/ipv6/route.c:6342 Code: fc ff ff e8 6d 52 ea f7 e9 47 fc ff ff 48 8b 7c 24 08 4c 89 04 24 e8 5a 52 ea f7 4c 8b 04 24 e9 94 fd ff ff e8 9c fe 84 f7 90 <0f> 0b 90 e9 bd fd ff ff e8 6e 52 ea f7 e9 bb fb ff ff 48 89 df e8 RSP: 0018:ffffc900035cf1d8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffffc900035cf540 RCX: ffffffff8a36e790 RDX: ffff88802f7e8000 RSI: ffffffff8a36e9d4 RDI: 0000000000000005 RBP: ffff88803c230f00 R08: 0000000000000005 R09: 00000000ffffffa6 R10: 00000000ffffffa6 R11: 0000000000000001 R12: 00000000ffffffa6 R13: 0000000000000900 R14: ffff888032ea4100 R15: 0000000000000000 FS: 00007fac7b89a6c0(0000) GS:ffff8880d6a20000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fac7b899f98 CR3: 0000000034b3f000 CR4: 0000000000352ef0 Call Trace: <TASK> ip6_route_mpath_notify+0xde/0x280 net/ipv6/route.c:5356 ip6_route_multipath_add+0x1181/0x1bd0 net/ipv6/route.c:5536 inet6_rtm_newroute+0xe4/0x1a0 net/ipv6/route.c:5647 rtnetlink_rcv_msg+0x95e/0xe90 net/core/rtnetlink.c:6944 netlink_rcv_skb+0x155/0x420 net/netlink/af_netlink.c:2552 netlink_unicast_kernel net/netlink/af_netlink.c:1320 [inline] netlink_unicast+0x58d/0x850 net/netlink/af_netlink.c:1346 netlink_sendmsg+0x8d1/0xdd0 net/netlink/af_netlink.c:1896 sock_sendmsg_nosec net/socket.c:712 [inline] __sock_sendmsg net/socket.c:727 [inline] ____sys_sendmsg+0xa95/0xc70 net/socket.c:2566 ___sys_sendmsg+0x134/0x1d0 net/socket.c:2620

In the Linux kernel, the following vulnerability has been resolved: Revert "drm/prime: Use dma_buf from GEM object instance" This reverts commit f83a9b8c7fd0557b0c50784bfdc1bbe9140c9bf8. The dma_buf field in struct drm_gem_object is not stable over the object instance's lifetime. The field becomes NULL when user space releases the final GEM handle on the buffer object. This resulted in a NULL-pointer deref. Workarounds in commit 5307dce878d4 ("drm/gem: Acquire references on GEM handles for framebuffers") and commit f6bfc9afc751 ("drm/framebuffer: Acquire internal references on GEM handles") only solved the problem partially. They especially don't work for buffer objects without a DRM framebuffer associated. Hence, this revert to going back to using .import_attach->dmabuf. v3: - cc stable

In the Linux kernel, the following vulnerability has been resolved: pinctrl: canaan: k230: add NULL check in DT parse Add a NULL check for the return value of of_get_property() when retrieving the "pinmux" property in the group parser. This avoids a potential NULL pointer dereference if the property is missing from the device tree node. Also fix a typo ("sintenel") in the device ID match table comment, correcting it to "sentinel".

In the Linux kernel, the following vulnerability has been resolved: landlock: Fix warning from KUnit tests get_id_range() expects a positive value as first argument but get_random_u8() can return 0. Fix this by clamping it. Validated by running the test in a for loop for 1000 times. Note that MAX() is wrong as it is only supposed to be used for constants, but max() is good here. [..] ok 9 test_range2_rand1 [..] ok 10 test_range2_rand2 [..] ok 11 test_range2_rand15 [..] ------------[ cut here ]------------ [..] WARNING: CPU: 6 PID: 104 at security/landlock/id.c:99 test_range2_rand16 (security/landlock/id.c:99 (discriminator 1) security/landlock/id.c:234 (discriminator 1)) [..] Modules linked in: [..] CPU: 6 UID: 0 PID: 104 Comm: kunit_try_catch Tainted: G N 6.16.0-rc1-dev-00001-g314a2f98b65f #1 PREEMPT(undef) [..] Tainted: [N]=TEST [..] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [..] RIP: 0010:test_range2_rand16 (security/landlock/id.c:99 (discriminator 1) security/landlock/id.c:234 (discriminator 1)) [..] Code: 49 c7 c0 10 70 30 82 4c 89 ff 48 c7 c6 a0 63 1e 83 49 c7 45 a0 e0 63 1e 83 e8 3f 95 17 00 e9 1f ff ff ff 0f 0b e9 df fd ff ff <0f> 0b ba 01 00 00 00 e9 68 fe ff ff 49 89 45 a8 49 8d 4d a0 45 31 [..] RSP: 0000:ffff888104eb7c78 EFLAGS: 00010246 [..] RAX: 0000000000000000 RBX: 000000000870822c RCX: 0000000000000000 ^^^^^^^^^^^^^^^^ [..] [..] Call Trace: [..] [..] ---[ end trace 0000000000000000 ]--- [..] ok 12 test_range2_rand16 [..] # landlock_id: pass:12 fail:0 skip:0 total:12 [..] # Totals: pass:12 fail:0 skip:0 total:12 [..] ok 1 landlock_id [mic: Minor cosmetic improvements]

In the Linux kernel, the following vulnerability has been resolved: arm64: dts: qcom: qcs615: fix a crash issue caused by infinite loop for Coresight An infinite loop has been created by the Coresight devices. When only a source device is enabled, the coresight_find_activated_sysfs_sink function is recursively invoked in an attempt to locate an active sink device, ultimately leading to a stack overflow and system crash. Therefore, disable the replicator1 to break the infinite loop and prevent a potential stack overflow. replicator1_out -> funnel_swao_in6 -> tmc_etf_swao_in -> tmc_etf_swao_out | | replicator1_in replicator_swao_in | | replicator0_out1 replicator_swao_out0 | | replicator0_in funnel_in1_in3 | | tmc_etf_out <- tmc_etf_in <- funnel_merg_out <- funnel_merg_in1 <- funnel_in1_out [call trace] dump_backtrace+0x9c/0x128 show_stack+0x20/0x38 dump_stack_lvl+0x48/0x60 dump_stack+0x18/0x28 panic+0x340/0x3b0 nmi_panic+0x94/0xa0 panic_bad_stack+0x114/0x138 handle_bad_stack+0x34/0xb8 __bad_stack+0x78/0x80 coresight_find_activated_sysfs_sink+0x28/0xa0 [coresight] coresight_find_activated_sysfs_sink+0x5c/0xa0 [coresight] coresight_find_activated_sysfs_sink+0x5c/0xa0 [coresight] coresight_find_activated_sysfs_sink+0x5c/0xa0 [coresight] coresight_find_activated_sysfs_sink+0x5c/0xa0 [coresight] ... coresight_find_activated_sysfs_sink+0x5c/0xa0 [coresight] coresight_enable_sysfs+0x80/0x2a0 [coresight] side effect after the change: Only trace data originating from AOSS can reach the ETF_SWAO and EUD sinks.

An issue was discovered in mouse07410 asn1c thru 0.9.29 (2025-03-20) - a fork of vlm asn1c. In UPER (Unaligned Packed Encoding Rules), asn1c-generated decoders fail to enforce INTEGER constraints when the bound is positive and exceeds 32 bits in length, potentially allowing incorrect or malicious input to be processed.

Mahara 21.10 before 21.10.6, 22.04 before 22.04.4, and 22.10 before 22.10.1 deserializes user input unsafely during skin import. A particularly structured XML file could cause code execution when being processed.

Mahara 21.10 before 21.10.6, 22.04 before 22.04.4, and 22.10 before 22.10.1 allows unsafe font upload for skins. A particularly structured XML file could allow one to traverse the server to obtain access to secure files or cause code execution based on the payload.

Reolink Smart 2K+ Plug-in Wi-Fi Video Doorbell with Chime - firmware v3.0.0.4662_2503122283 was discovered to manage users' sessions system wide instead of an account-by-account basis, potentially leading to a Denial of Service (DoS) via resource exhaustion. NOTE: the Supplier reports that the system-wide limit is intentional.

Insecure permissions in Reolink Smart 2K+ Plug-in Wi-Fi Video Doorbell with Chime - firmware v3.0.0.4662_2503122283 allow attackers to arbitrarily change other users' passwords via manipulation of the userName value.

Reolink Smart 2K+ Plug-in Wi-Fi Video Doorbell with Chime - firmware v3.0.0.4662_2503122283 was discovered to contain a command injection vulnerability via the setddns_pip_system() function.

A discrepancy in the error message returned by the login function of Reolink Smart 2K+ Plug-in Wi-Fi Video Doorbell with Chime - firmware v3.0.0.4662_2503122283 when entering the wrong username and password allows attackers to enumerate existing accounts.

Reolink v4.54.0.4.20250526 was discovered to contain a task hijacking vulnerability due to inappropriate taskAffinity settings. NOTE: this is disputed by the Supplier because it is intentional behavior to ensure a predictable user experience.

An open redirect vulnerability in Reolink v4.54.0.4.20250526 allows attackers to redirect users to a malicious site via a crafted URL. NOTE: this is disputed by the Supplier because it is intentional behavior that supports redirection to Alexa URLs, which are not guaranteed to remain at the same domain indefinitely.

An intent redirection vulnerability in Reolink v4.54.0.4.20250526 allows unauthorized attackers to access internal functions or access non-public components.

An issue in the lock screen component of Reolink v4.54.0.4.20250526 allows attackers to bypass authentication via using an ADB (Android Debug Bridge).

A cross-site scripting (XSS) vulnerability in the valuateJavascript() function of Reolink v4.54.0.4.20250526 allows attackers to execute arbitrary web scripts or HTML via a crafted payload.

D-Link DIR-619L 2.06B01 is vulnerable to Buffer Overflow in the formLanguageChange function via the nextPage parameter.

Reolink v4.54.0.4.20250526 was discovered to contain a hardcoded encryption key and initialization vector. An attacker can leverage this vulnerability to decrypt access tokens and web session tokens stored inside the app via reverse engineering.

Tenda O3V2 1.0.0.12(3880) is vulnerable to Buffer Overflow in the fromSafeSetMacFilter function via the mac parameter.

An Insecure Direct Object Reference (IDOR) vulnerability in Reolink Smart 2K+ Plug-in Wi-Fi Video Doorbell with Chime - firmware v3.0.0.4662_2503122283 allows unauthorized attackers to access the Admin-only settings and edit the session storage.

Tenda AX3 V16.03.12.10_CN is vulnerable to Buffer Overflow in the fromSetSysTime function via the ntpServer parameter.

D-Link DIR-619L 2.06B01 is vulnerable to Buffer Overflow in the formSysCmd function via the submit-url parameter.

D-Link DIR-619L 2.06B01 is vulnerable to Buffer Overflow in the formWlanSetup function via the parameter f_wds_wepKey.

D-Link DCS-825L firmware version 1.08.01 and possibly prior versions contain an insecure implementation in the mydlink-watch-dog.sh script. The script monitors and respawns the `dcp` and `signalc` binaries without validating their integrity, origin, or permissions. An attacker with filesystem access (e.g., via UART or firmware modification) may replace these binaries to achieve persistent arbitrary code execution with root privileges. The issue stems from improper handling of executable trust and absence of integrity checks in the watchdog logic.

DooTask v1.0.51 was dicovered to contain an authenticated arbitrary download vulnerability via the component /msg/sendtext.

An authenticated arbitrary file upload vulnerability in the component /msg/sendfiles of DooTask v1.0.51 allows attackers to execute arbitrary code via uploading a crafted file.

QuantumNous new-api v.0.8.5.2 is vulnerable to Cross Site Scripting (XSS).

OperaMasks SDK ELite Script Engine v0.5.0 was discovered to contain a deserialization vulnerability.

An SQL injection vulnerability in Yoosee application v6.32.4 allows authenticated users to inject arbitrary SQL queries via a request to a backend API endpoint. Successful exploitation enables extraction of sensitive database information, including but not limited to, the database server banner and version, current database user and schema, the current DBMS user privileges, and arbitrary data from any table.

An issue in PDQ Smart Deploy V.3.0.2040 allows an attacker to escalate privileges via the Credential encryption routines in SDCommon.dll

JeecgBoot versions from 3.4.3 up to 3.8.0 were found to contain a SQL injection vulnerability in the /jeecg-boot/online/cgreport/head/parseSql endpoint, which allows bypassing SQL blacklist restrictions.

An issue was discovered in Shopizer 3.2.7. The server's CORS implementation reflects the client-supplied Origin header verbatim into Access-Control-Allow-Origin without any whitelist validation, while also enabling Access-Control-Allow-Credentials: true. This allows any malicious origin to make authenticated cross-origin requests and read sensitive responses.

The LogIn-SignUp project by VishnuSivadasVS is vulnerable to SQL Injection due to unsafe construction of SQL queries in DataBase.php. The functions logIn() and signUp() build queries by directly concatenating user input and unvalidated table names without using prepared statements. While a prepareData() function exists, it is insufficient to prevent SQL injection and does not sanitize the table name.