CVE Feed

In the Linux kernel, the following vulnerability has been resolved: usb: atm: cxacru: properly kill rcv_urb on error in cxacru_cm() If cxacru_cm() encounters an error while submitting or waiting for snd_urb, it aborts and returns the error without killing the already submitted rcv_urb. This leaves the rcv_urb active. When this happens during initialization (e.g., in cxacru_atm_start()), the driver may ignore the error and proceed to call cxacru_poll_status(), which invokes cxacru_cm() again. Attempting to submit the still-active rcv_urb triggers a warning in usb_submit_urb(): cxacru 1-1:1.0: send of cm 0x84 failed (-104) ATM dev 0: cxacru_atm_start: CHIP_ADSL_LINE_START returned -104 ------------[ cut here ]------------ URB ffff88812658d200 submitted while active WARNING: drivers/usb/core/urb.c:379 at usb_submit_urb+0x79/0x18b0 drivers/usb/core/urb.c:379 ... Call Trace: <TASK> cxacru_cm+0x21a/0xf10 drivers/usb/atm/cxacru.c:631 cxacru_cm_get_array drivers/usb/atm/cxacru.c:722 [inline] cxacru_poll_status+0x178/0x1110 drivers/usb/atm/cxacru.c:828 cxacru_atm_start+0x185/0x360 drivers/usb/atm/cxacru.c:814 usbatm_atm_init+0x144/0x3a0 drivers/usb/atm/usbatm.c:927 usbatm_usb_probe+0x15cb/0x1db0 drivers/usb/atm/usbatm.c:1178 cxacru_usb_probe+0x17f/0x220 drivers/usb/atm/cxacru.c:1370 ... To fix this, ensure that rcv_urb is properly killed if cxacru_cm() aborts early. We can safely call usb_kill_urb() on rcv_urb in the error path, as it is safe to call even if the URB is not active (e.g., if it failed to submit in the first place, or if it already completed).

In the Linux kernel, the following vulnerability has been resolved: net/ncsi: fix heap OOB read in NCSI_CMD_SEND_CMD payload length ncsi_send_cmd_nl() takes the number of bytes to copy from the attacker-controlled ncsi_pkt_hdr.length field of the in-band packet header, while the source buffer is the NCSI_ATTR_DATA netlink attribute whose readable size is nla_len() - sizeof(ncsi_pkt_hdr). The two length sources are never cross-checked: only nla_len() >= sizeof(struct ncsi_pkt_hdr) is enforced. With hdr->length set larger than the attribute payload (up to 65535 against at most 2032 readable bytes), ncsi_cmd_handler_oem() copies past the end of the netlink attribute buffer with unsafe_memcpy(), leaking up to ~64KB of kernel heap memory into the transmitted NCSI command packet. The destination skb is sized by the declared payload, so the write side does not overflow - this is a pure OOB read / information leak, reachable with CAP_NET_ADMIN on systems with a registered NCSI device (e.g. OpenBMC on Aspeed BMC SoCs, where NET_NCSI=y is standard). Reject commands whose declared payload extends past the end of the data attribute. The issue was found by the autokbug dynamic kernel fuzzer at Tencent Yunding Lab.

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix memory leak in exec_queue_set_hang_replay_state() The q->replay_state is blindly overwritten, which can potentially leak memory that was previously allocated by vmemdup_user(). Return an error if q->replay_state is not empty. Discovered using AI-assisted static analysis confirmed by Intel Product Security. (cherry picked from commit f6b6cc1118bdbc4265fa8b3bdf8565b26f13e56e)

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: fw_tracer, return NULL on create error Tracer creation can fail by returning either NULL or ERR_PTR. The return value is stored without a check on the device, and users treat ERR_PTR and NULL the same way. This also causes a crash in the core dump logic, which is missing the ERR_PTR check and ends up dereferencing it, as shown in the trace below. Switch tracer creation to return NULL on failure only, so callers only need a single NULL check. Internal error: Oops: 0000000096000006 [#1] SMP Modules linked in: mlx5_ib ib_uverbs ib_core ipv6 mlx5_core CPU: 1 UID: 0 PID: 12 Comm: kworker/u16:0 Not tainted 6.19.7 #1 PREEMPT(none) Workqueue: mlx5_health0001:01:00.0 mlx5_fw_reporter_err_work [mlx5_core] pstate: a3400009 (NzCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : mlx5_fw_tracer_trigger_core_dump_general+0x58/0xe0 [mlx5_core] lr : mlx5_fw_tracer_trigger_core_dump_general+0x40/0xe0 [mlx5_core] sp : ffff800081cf3c40 x29: ffff800081cf3c90 x28: 0000000000000000 x27: 0000000000000000 x26: ffff000080018828 x25: 0000000000000000 x24: ffff000080304a05 x23: ffff800081cf3d80 x22: ffff0000847e01a0 x21: 0000000000000000 x20: ffff0000847e01a0 x19: ffffffffffffffa1 x18: ffff80008310bbf0 x17: ffff800080119650 x16: ffff80008010df54 x15: ffff80008010d4ac x14: ffff800079c202e4 x13: ffff80008002fe60 x12: ffff800080119650 x11: ffff80008010df54 x10: ffff80008010d4ac x9 : ffff800079c203d8 x8 : ffff800081cf3c88 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000008 x3 : 0000000000000030 x2 : 0000000000000008 x1 : 0000000000000000 x0 : 00000000c5c4000e Call trace: mlx5_fw_tracer_trigger_core_dump_general+0x58/0xe0 [mlx5_core] (P) mlx5_fw_reporter_dump+0x30/0x2e0 [mlx5_core] devlink_health_do_dump+0x9c/0x160 devlink_health_report+0x1c0/0x288 mlx5_fw_reporter_err_work+0xac/0xc0 [mlx5_core] process_one_work+0x15c/0x3d8 worker_thread+0x18c/0x320 kthread+0x148/0x228 ret_from_fork+0x10/0x20 Code: b9400000 5ac00800 7a401800 540003ca (3940a260) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception SMP: stopping secondary CPUs Kernel Offset: disabled CPU features: 0x000000,00078031,75fce5a1,35fffe67 Memory Limit: none ---[ end Kernel panic - not syncing: Oops: Fatal exception ]---

In the Linux kernel, the following vulnerability has been resolved: devlink: fix net namespace reference leak in reload devlink_nl_reload_doit() calls devlink_netns_get(), which returns a net with a held reference. When the requested namespace differs from the current one and the reload action is not DRIVER_REINIT, the function returns -EOPNOTSUPP without releasing the reference. Add the missing put_net() on this error path.

In the Linux kernel, the following vulnerability has been resolved: soc: aspeed: lpc-snoop: Fix usercopy overflow in snoop_file_read put_fifo_with_discard() acts as both producer and consumer on the kfifo: it calls kfifo_skip() (advances out) and kfifo_put() (advances in) from the IRQ handler without synchronizing with snoop_file_read(), which also consumes via kfifo_to_user(). On SMP systems this concurrent access can leave (in - out) larger than the ring buffer, so __kfifo_to_user()'s clamp to (in - out) is ineffective and kfifo_copy_to_user() can attempt a copy_to_user() past the kmalloc-2k backing store: usercopy: Kernel memory exposure attempt detected from SLUB object 'kmalloc-2k' (offset 0, size 2049)! kernel BUG at mm/usercopy.c! Call trace: usercopy_abort __check_heap_object __check_object_size kfifo_copy_to_user __kfifo_to_user snoop_file_read vfs_read Serialize kfifo access with a per-channel spinlock shared between the IRQ handler (producer) and the file reader (consumer). Annotate @fifo with __guarded_by(&lock) and opt the driver into context analysis so the compiler enforces that all fifo access holds the lock.

In strongSwan before 6.0.7, identity parsing/cloning is mishandled. Parsed EAP-Identities that result in an empty but non-NULL encoding are not correctly cloned and trigger a double-free once the duplicates are destroyed.

In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Serialize accesses to the owner and mirror list with separate lock Interaction between KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM and KVM_CAP_VM_COPY_ENC_CONTEXT_FROM can cause two separate issues: - in sev_migrate_from(), when the destination KVM is a mirror, the mirror entry is moved from the source's list to the owner's mirror_vms list, without holding the owner's lock unlike other writers of the owner's mirror list (sev_vm_copy_enc_context_from(), sev_vm_destroy()). A concurrent COPY or destroy can race with sev_migrate_from() and corrupt the list. - In sev_vm_destroy(), the *owner* is still active and could receive concurrently a KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM that causes sev->enc_context_owner to change. In this case the incorrect VM receives kvm_put_kvm(). The second issue needs particular care because the owner could disappear altogether (even though the race window is impossibly small) between reading it and locking it. There is thus no way to perform the checks under the owner lock without putting struct kvm under SLAB_TYPESAFE_BY_RCU (which would allow kvm_get_kvm_safe() under RCU critical section). It is much simpler to just use a global lock, since the critical sections are so small and the new lock is always a leaf lock.

In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Use current_context for safe per-CPU buffer swap The ring_buffer_swap_cpu() function currently checks the per-CPU committing counter to determine if a buffer is actively being written to before performing the swap. However, there exists a race window where this check can be bypassed: ring_buffer_lock_reserve cpu_buffer = buffer->buffers[cpu]; // cpu_buffer_a rb_reserve_next_event rb_start_commit // inc committing if (unlikely(READ_ONCE(cpu_buffer->buffer) != buffer)) {...} __rb_reserve_next rb_move_tail rb_end_commit(cpu_buffer); // dec committing => 0 /* interrupt hits here, successfully swaps! */ local_inc(&cpu_buffer->committing); ring_buffer_unlock_commit cpu_buffer = buffer->buffers[cpu]; // cpu_buffer_b rb_commit rb_end_commit RB_WARN_ON(cpu_buffer, !local_read(&cpu_buffer->committing)) // triggers warning The committing counter can temporarily drop to 0 during a single write operation (within rb_move_tail), creating a window where swap can succeed even though the write is still in progress. This leads to inconsistent buffer state and triggers the RB_WARN_ON in rb_commit(). Replace the committing counter check with current_context checks, which are set at the entry of ring_buffer_lock_reserve() and remain valid throughout the entire write operation, providing a reliable indicator of buffer busy state during swap.

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_gact, act_police: range check the fallback control action tcf_action_check_ctrlact() range checks the primary control action: if (!opcode) ret = action > TC_ACT_VALUE_MAX ? -EINVAL : 0; TC_ACT_VALUE_MAX is TC_ACT_TRAP, so kernel-internal verdicts above it cannot be set that way. But act_gact and act_police each carry a second, independent control action supplied by user space that never reaches that helper - TCA_GACT_PROB.paction and TCA_POLICE_RESULT. Both only reject TC_ACT_GOTO_CHAIN, so any other value is stored verbatim and returned verbatim from the action. In particular user space can store TC_ACT_CONSUMED, which is TC_ACT_VALUE_MAX + 1 and is deliberately not part of the UAPI value range. That verdict tells every caller the action took ownership of the skb, so nobody frees it: sch_handle_ingress(), sch_handle_egress() and tcf_qevent_handle() all deliberately skip the free for it. The result is one leaked sk_buff plus its data buffer per packet traversing the filter, unbounded, for all traffic on the chain including kernel-generated packets. Both are trivially deterministic. act_gact clamps tcfg_pval to >= 1, so with pval = 1 gact_determ() returns the fallback for every packet. act_police has no mandatory rate, so rate = 0 leaves tcfp_mtu = ~0 and tcf_police_mtu_check() always passes. TC_ACT_CONSUMED was added by commit 720f22fed81b ("net: sched: refactor reinsert action"), after both goto-chain guards were written: commit 9469f375ab09 ("net/sched: act_gact: disallow 'goto chain' on fallback control action") and commit c08f5ed5d625 ("net/sched: act_police: disallow 'goto chain' on fallback control action"). Neither guard was widened when the new verdict appeared. Factor the existing range test out of tcf_action_check_ctrlact() as tcf_action_valid() and apply it to both fallbacks. The helper cannot call tcf_action_check_ctrlact() directly because that also allocates a goto_chain, which is exactly what these two sites must not do. Reproduced on v7.2-rc6: kmemleak reports one leaked 232-byte skbuff_head_cache object plus its 704-byte data buffer per packet. With this patch both configurations are rejected with -EINVAL and kmemleak reports none.

In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: zero shared page before exposing to userspace bnxt_re_alloc_ucontext() allocates uctx->shpg via __get_free_page(GFP_KERNEL). The buddy allocator does not zero pages without __GFP_ZERO, so the page contains stale kernel data from whatever object most recently freed it. The page is then mapped into userspace via vm_insert_page() under BNXT_RE_MMAP_SH_PAGE in bnxt_re_mmap(). The driver only ever writes 4 bytes (a u32 AVID) at offset BNXT_RE_AVID_OFFT (0x10) inside bnxt_re_create_ah(); the remaining 4092 bytes of the page are exposed to userspace unsanitised, leaking kernel memory contents. Any user with access to /dev/infiniband/uverbsX on a host with a bnxt_re device (typically rdma group membership) can read this data via a single mmap() at pgoff 0 after IB_USER_VERBS_CMD_GET_CONTEXT. Other shared pages in the same file already use get_zeroed_page() correctly: drivers/infiniband/hw/bnxt_re/ib_verbs.c srq->uctx_srq_page = (void *)get_zeroed_page(GFP_KERNEL); cq->uctx_cq_page = (void *)get_zeroed_page(GFP_KERNEL); uctx->shpg is the only outlier. Bring it in line with the existing convention by switching to get_zeroed_page().

In the Linux kernel, the following vulnerability has been resolved: mm/ptdump: always stabilise against page table freeing using init_mm Previous commits have established the invariant that kernel page table freeing is performed while an mmap read lock on init_mm is held, which fixes races between ptdump and kernel page table freeing over init_mm. However, x86 and arm64 can perform a ptdump over an mm other than init_mm via ptdump_walk_pgd() and since kernel memory ranges are shared across non-kernel mm's, this means that the race still exists for these cases. Fix this by acquiring a nested mmap write lock for init_mm in ptdump_walk_pgd(). This is safe as we take this after mmap write locking the mm, and nothing acquires the init_mm lock first before locking an arbitrary mm, so no deadlock is possible. Also update walk_page_range_debug() to assert that init_mm is write locked, add a comment explaining why and remove some redundant code, and eliminate the unnecessary and confusing invocation of walk_kernel_page_table_range(). We can safely remove the non-NULL check for walk.mm, as the mmap lock asserts would NULL pointer deref if it was (and of course no callers do this). The first point at which ptdump can race kernel page table freeing is commit b6bdb7517c3d ("mm/vmalloc: add interfaces to free unmapped page table"), so we target this in the Fixes tag.

In the Linux kernel, the following vulnerability has been resolved: eventfs: Fix use-after-free in eventfs_remove_rec() eventfs_remove_rec() recursively removes the child at the current loop position. After the recursive call returns, list_for_each_entry() advances by reading list.next from the removed child. If free_ei() drops the final reference, release_ei() reuses the list/rcu union to queue an SRCU callback. The child may be freed before that read. The eventfs_mutex serializes list updates, but it does not keep the removed child alive or prevent the SRCU callback from running. Use list_for_each_entry_safe() to save the next sibling before recursively removing the current child.

Tie::Hash::Regex versions before 2.0.0 for Perl will throw an exception on unparseable lookup keys. The FETCH, EXISTS and DELETE methods throw an exception when on malformed regular expressions. Each method falls back to a regex match when the key is not already stored in the hash, compiling the caller's key with a bare qr// and no eval guard. A key that is not a valid regular expression pattern, such as a single unmatched bracket, dies. An application that looks up externally supplied strings in a tied hash will die on an invalid key.

Recce is a data-validation toolkit for enhanced dbt (data build tool) PR review. Prior to version 1.50.0, OSS server deployments that expose the server to an untrusted network without authentication are vulnerable to unauthenticated SQL execution through the query run API. When Recce is configured with a DuckDB-backed project, an attacker can use DuckDB filesystem primitives to read and write files accessible to the Recce server process. The impact depends on how Recce is deployed, but may include disclosure of local files, tampering with Recce/dbt artifacts, modification of browser-served static files leading to stored XSS, and modification of application files if those paths are writable. If Recce is run as root, file access occurs with root privileges inside that host or container. This issue has been patched in Recce `v1.50.0`. Users should upgrade to Recce `v1.50.0` or later. The patch restricts unsafe file read/write behavior for DuckDB-backed query execution and hardens the affected query path. Other warehouse adapters have also been reviewed for similar exposure. Users who cannot upgrade immediately should avoid exposing `recce server` to the public internet or any untrusted network. Recommended mitigations include enabling authentication or placing Recce behind an authenticated reverse proxy/VPN, running Recce as a non-root user, using a read-only application filesystem where possible, and ensuring that sensitive files or credentials are not available to the Recce process.

OliveTin gives access to predefined shell commands from a web interface. The `filterToDefinedArgumentsOnly` function in the executor is intended to discard any arguments not explicitly defined in the action's configuration. However, prior to commit ebffd9f040f791208aee1db2e5a8aecd1e3e603d, a special case allows any argument whose name starts with `ot_` to bypass this filter. While two system arguments (`ot_executionTrackingId` and `ot_username`) are injected by OliveTin and overridden, all other `ot_`-prefixed arguments supplied by the user pass through unmodified. These bypassed arguments are not type-checked — the validation loop only iterates over the action's defined arguments, so `ot_`-prefixed arguments skip all type safety checks entirely; set as environment variables — via `buildEnv()`, with completely unvalidated values, and passed to the executed command; and included in the template context — available as `.Arguments.ot_*` in template rendering. Commit ebffd9f040f791208aee1db2e5a8aecd1e3e603d contains a patch.

Arc is an open, SQL-native time-series database for telemetry. Prior to version 26.06.1, Arc Enterprise's cluster replication receiver at `internal/cluster/replication/receiver.go` validates only the wire-format envelope (length, opcode) of inbound messages. The `MsgReplicateSync` payload itself is accepted without any application-layer authentication — no HMAC, no signature, no per-message nonce. The replication stream is protected at the transport layer by TLS / mTLS, but there is no protection against application-layer message tampering or replay once a peer is on the cluster network. This is fixed in 2026.06.1. Some workarounds are available. Restrict cluster network access to known-trusted peers via strict firewall rules, audit replication logs for unexpected `MsgReplicateSync` traffic, and/or disable cluster mode until the fix is available.

Arc is an open, SQL-native time-series database for telemetry. Prior to version 26.06.1, Arc Enterprise's Raft FSM (`internal/cluster/raft/fsm.go:applyRegisterFile`) accepts attacker-chosen file paths in manifest-registration proposals without validating them against the configured storage backend. The only check is that the path is non-empty. There is no parent-traversal (`..`) rejection, no allowlist of legitimate prefixes, no scheme restriction (`s3://` vs local), and no length bound. This is fixed in 2026.06.1. Some workarounds are available. Restrict cluster network access to known-trusted peers via strict firewall rules, audit the cluster manifest for unexpected paths (any path not matching the configured storage backend root is suspect), and/or disable cluster mode until the fix is available.

Arc is an open, SQL-native time-series database for telemetry. Prior to version 26.06.1, Arc's user-SQL validator (`internal/api/query.go:ValidateSQLRequest`) blocked only `read_parquet(` and `arc_partition_agg(` via regex denylist. The broader DuckDB I/O function family — `read_csv_auto`, `read_csv`, `read_json`, `read_json_auto`, `read_text`, `read_blob`, `glob`, `parquet_metadata`, `parquet_schema`, `read_xlsx`, etc. — was not blocked. RBAC table-reference extraction inspected only `FROM`/`JOIN` clauses, so scalar table functions in the `SELECT` list slipped past both layers. This is fixed in 2026.06.1 via a structural sandbox at the DuckDB layer. After lockdown, DuckDB refuses to open any file outside the allowlist and refuses further `INSTALL`/`LOAD`. Already-loaded extensions remain callable. Some workarounds are available. Restrict API access to known-trusted networks via firewall rules or, as a temporary mitigation, add `read_csv*`/`read_json*`/`glob` etc. to `dangerousSQLPattern` in `internal/api/query.go`.

Arc is an open, SQL-native time-series database for telemetry. Versions prior to 26.06.1 register Go's `net/http/pprof` handlers at `/debug/pprof/*` via `app.Use(pprof.New())` in `internal/api/server.go`, and `/debug/pprof` is added to `PublicPrefixes` in `cmd/arc/main.go`. The auth middleware short-circuits before the token check on prefix match, so the endpoints are reachable without any authentication. Version 26.06.1 contains a patch. Some workarounds are available. Block `/debug/pprof*` at a reverse proxy / load balancer in front of Arc, restrict Arc's API port to known-trusted networks via firewall rules, and/or patch the running build: comment out `app.Use(pprof.New())` in `internal/api/server.go` and rebuild.

Combodo iTop is a web based IT service management tool.Prior to 3.2.3, an unauthenticated user could delete the .readonly file on iTop instances — a file created during the setup process that prevents users from performing write actions. This issue has been fixed in version 3.2.3.

FORT Validator is a Resource Public Key Infrastructure (RPKI) relying-party validator that produces validated route-origin data. FORT Validator versions through 1.6.7 contain an origin-validation error in their RRDP processing: a delegated CA under the same Trust Anchor Locator (TAL) can reference a victim CA’s public RRDP notification and snapshot URLs, causing FORT’s URL-based download cache to report success after deleting the victim’s local snapshot. Following a routine victim publication, this can silently remove the victim’s VRPs and other signed objects from FORT’s output, potentially enabling route hijacking or loss of reachability. Version 1.6.8 contains a patch that rejects cross-origin RRDP snapshot and delta URLs; as a workaround, administrators can disable HTTP/RRDP with  --http.enabled=false  while keeping rsync enabled, although this can leave data unavailable or stale where rsync is not supported.

Combodo iTop is a web based IT service management tool. Prior to 3.2.3, only classes present in the SELECT clause are protected by the silos access check in OQL. This issue has been fixed in version 3.2.3.

WeeChat (Wee Enhanced Environment for Chat) is a free chat client. In versions 0.3.1 through 4.9.0, the WeeChat relay authentication uses non-constant-time string comparison functions (weechat_strcasecmp and strcmp) to verify password hashes and plaintext passwords. An attacker can exploit timing differences to extract the server-computed hash character by character, then authenticate using the correct hash without knowing the password. Version 4.9.1 fixes the issue.

WeeChat (Wee Enhanced Environment for Chat) is a free chat client. In versions 4.3.0 through 4.9.0, the WeeChat relay module's WebSocket permessage-deflate decompression function relay_websocket_inflate() has no upper bound on output size. An authenticated relay user can send a small compressed WebSocket frame (~100 bytes) that decompresses to gigabytes, exhausting all server memory and crashing the entire WeeChat process. The api protocol enables permessage-deflate and requires authentication before WebSocket upgrade. Version 4.9.1 patches the issue.

Combodo iTop is a web based IT service management tool. Prior to 3.2.3, improper access control in ajax.render.php and ajax.document.php allows for document access without checking on user permissions. This issue has been fixed in version 3.2.3.

Combodo iTop is a web based IT service management tool. Prior to 3.2.3, authentication bypass allows unauthenticated remote attackers to execute arbitrary PHP files from the env-production directory on a new iTop instance in the production environment. This issue has been fixed in version 3.2.3.

Combodo iTop is a web based IT service management tool. Prior to 3.2.3, there is sensitive information disclosure in the error messages. This issue has been fixed in version 3.2.3.

Kite is a Kubernetes dashboard. Prior to version 0.12.3, authenticated Kite users with any role can request `/api/v1/overview` for a cluster that their roles do not permit by selecting that cluster with `x-cluster-name`. The overview route is registered before `middleware.RBACMiddleware()` and `GetOverview` only checks `len(user.Roles) > 0`, so it returns aggregate Kubernetes inventory and capacity data from unauthorized clusters. Version 0.12.3 fixes the issue.

RaTeX is a KaTeX-compatible math rendering engine written in Rust. Prior to version 0.1.11, RaTeX’s recursive-descent parser recurses one (or more) native stack frame per nesting level at `{`, `\left`, `\sqrt{`, `^{`, etc, with no maximum depth limit. A short, ~10 KB input of nested groups overflows the 8 MB main-thread stack and aborts the process. With `panic = "abort"` (`Cargo.toml:48`), and because a Rust stack overflow is always a fatal `SIGABRT` regardless of panic strategy this is an unrecoverable, whole-process denial of service reachable from a single untrusted LaTeX string. Version 0.1.11 fixes the issue.

RaTeX is a KaTeX-compatible math rendering engine written in Rust. Prior to version 0.1.11, the public parser entrypoint `ratex_parser::parse(&str)` panics on the 9-byte input `\verbéxé` (i.e. `\verb` followed by the non-ASCII delimiter `é`). When handling a `\verb` command, the parser slices the verbatim argument with byte indices (`arg[1..arg.len() - 1]`); if the delimiter character is multibyte UTF-8, index `1` lands inside that character and Rust panics with *“byte index 1 is not a char boundary”*. Because RaTeX’s release profile sets `panic = "abort"` (`Cargo.toml:48`), the panic aborts the entire process — not just the current request/thread — making this a hard denial of service for any service that renders untrusted LaTeX. Version 0.1.11 fixes the issue.

LeafWiki is a self-hosted wiki. Prior to version 0.10.2, page titles returned by the search API could be rendered as raw HTML in the frontend. A user with editor or administrator permissions could create or modify a page title containing an HTML/JavaScript payload. When another user searched for a matching term, the payload could execute in the victim’s browser. The impact depends on deployment configuration. With `--public-access` enabled, unauthenticated visitors could be affected. In authenticated-only deployments, the issue could be used for cross-user XSS against logged-in users who can access search results. The issue has been fixed in version 0.10.2 by ensuring that author-controlled page titles in search results are not interpreted as raw HTML by the browser while preserving search result highlighting.

LeafWiki is a self-hosted wiki. Versions 0.3.0 through 0.10.0 have a path traversal vulnerability in LeafWiki’s asset rename functionality. An authenticated user with editor permissions could move files that are accessible to the LeafWiki server process into a page’s asset directory. This could allow sensitive local files, such as the application database, to become downloadable as page assets. Users should update to version 0.10.1 or greater. As an additional mitigation, operators should ensure that the LeafWiki process runs with the least privileges necessary and does not have filesystem access to sensitive files outside the application’s required directories. Until a patch is applied, operators may reduce risk by restricting editor access to trusted users only and by limiting the filesystem permissions of the LeafWiki process.

LeafWiki is a self-hosted wiki. Versions 0.1.0 through 0.10.0 have a privilege escalation vulnerability in the user update API. An authenticated user could update their own account role and escalate privileges from a regular user, such as `viewer`, to `admin`. Exploitation requires a valid authenticated LeafWiki user account. Instances without public registration and with only trusted users are at lower practical risk. Users should update to version 0.10.1 or greater. Until a patch is available, operators should restrict account creation and ensure that only trusted users have accounts on affected LeafWiki instances. If possible, access to the user update API should be restricted to trusted users or administrators only.

Combodo iTop is a web based IT service management tool. Prior to 3.2.3, there was a Reflected Cross-Site Scripting (XSS) vulnerability in the foreign key search criteria API. This issue has been fixed in version 3.2.3.

Combodo iTop is a web based IT service management tool. Prior to 3.2.3, an object can be locked by a user who is not assigned write permissions. This issue has been fixed in version 3.2.3.

CKAN MCP Server is a tool for querying CKAN open data portals. A known vulnerability CVE-2026-33060 indicated tools including ckan_package_search and sparql_query that accept a base_url parameter had the risk of making HTTP requests to arbitrary endpoints without restriction. A fix was applied to filter out ip addresses. However, a method to bypass exists prior to version 0.4.106. CKAN MCP Server validates caller-supplied CKAN server URLs by inspecting only the parsed hostname string before issuing outbound HTTP requests. In `src/utils/http.ts`, hostname aliases such as `ip6-localhost` are not equal to `localhost`, are not dotted IPv4 literals, and are not bracketed IPv6 literals, so they pass the SSRF filter but can resolve to loopback when the server performs the request. A remote MCP caller that can invoke CKAN tools with a `server_url` can therefore make the server connect to local or private addresses and, for CKAN-shaped responses, receive response-derived data. The updated fix in version 0.4.106 replaced the single `hostname === 'localhost'` check with a blocked-hostname `Set` covering `ip6-localhost` and `ip6-loopback`.

CrossWatch (CW) is a synchronization engine. Prior to version 0.9.21, GET /api/app-auth/status is accessible without authentication and returns the other_sessions array, which exposes metadata of all active sessions — including originating IP addresses, User-Agent strings, internal session IDs, and creation/expiry timestamps. Any unauthenticated network attacker can enumerate this data without credentials. Version 0.9.21 fixes the issue.

Malla is a web analyzer for Meshtastic networks based on MQTT data. Prior to commit 4086e2b5f61615a813b70b25bc76095083552135, code names (long_name, short_name) received via MQTT are stored in SQLite without sanitization and rendered into the DOM without escaping. Any participant on a public Meshtastic MQTT broker can set a malicious node name that executes JavaScript in the browser of every Malla dashboard visitor. Commit 4086e2b5f61615a813b70b25bc76095083552135 fixes the issue.

Combodo iTop is a web based IT service management tool. Prior to 3.2.3, users can access to unauthorized object information through the search operation. This issue has been fixed in version 3.2.3.

Typemill is a flat-file, Markdown-based content management system designed for informational documentation websites. Versions prior to 2.23.0 are vulnerable to stored HTML attribute injection in the page metadata fields (`og:title` and `og:description`). An authenticated user with permission to modify page metadata can inject arbitrary HTML attributes into generated `<meta>` tags due to missing output encoding. Under certain browser or DOM interaction scenarios, this may lead to stored cross-site scripting (XSS). Version 2.23.0 fixes the issue.

xShop is an open-source shop developed in Laravel. An Unrestricted File Upload vulnerability in xShop version 3.0.3 allows an authenticated administrator to upload executable files (e.g., .php). By uploading a specially crafted php file, an attacker can achieve Remote Code Execution (RCE) on the server, leading to a full system compromise. Version 3.0.4 fixes the issue.

LibVNCClient is a library for easy implementation of a VNC client. In versions 0.9.12 through 0.9.15, a malicious (or man-in-the-middle) VNC server can force a connecting `libvncclient` to write attacker-controlled data past the end of its framebuffer. This is an out-of-bounds heap write with attacker-controlled length, contents, and offset. It needs no authentication (the attacker is the server), works in a default build with default settings, and fires from a single `FramebufferUpdate` the moment the victim connects. It crashes any client unconditionally (denial of service); we also demonstrated it overwriting an application callback pointer and redirecting execution to attacker-chosen code (code execution) under the default configuration. Commit 540332be3e0acc566fa64da6f1b4680c72c724dd patches the issue.

JSONata is a JSON query and transformation language. Prior to 1.8.8 and 2.2.1, crafted JSONata expressions could chain several object-integrity weaknesses to execute arbitrary code. The chain could overwrite $clone to mutate objects through evaluateTransformExpression, expose and deconstruct JSONata functions or lambdas through $merge.*, replace proc.arguments.forEach used by applyProcedure, and forge internal lambda state. These primitives allowed an attacker to reach prototype getters, prototype and constructor access, and process.getBuiltinModule with child_process, executing code with the privileges of the host process. This issue is fixed in versions 1.8.8 and 2.2.1.

Picotls is a TLS protocol library that allows users select different crypto backends based on their use case. Picotls implements its own ASN.1 validation helper, which is used by the minicrypto backend while parsing local PKCS#8 private keys. Prior to commit c14231d801407640bc42c2dcf92783409ea6a7c7, the validator recursively descends into constructed ASN.1 elements without enforcing a maximum nesting depth. If an application loads an attacker-supplied private-key file through ptls_minicrypto_load_private_key(), or otherwise calls the public ASN.1 validation API on untrusted DER, a crafted deeply nested ASN.1 structure can exhaust the process stack and crash the application. Note that the libcrypto (OpenSSL) backend does not use the ASN.1 validation helper of picotls, and therefore is immune to this vulnerability. The vulnerability has been addressed in commit c14231d801407640bc42c2dcf92783409ea6a7c7.

Combodo iTop is a web based IT service management tool. Prior to 3.2.3, there is a Reflected Cross-Site Scripting (XSS) vulnerability in the universal search. This issue has been fixed in version 3.2.3.

PDFio before 1.6.5 contains a dangling pointer vulnerability in the dictionary string-formatting function that stores a pointer to a stack-local buffer in the document dictionary without copying the string value. In multi-threaded or pooled-request environments, attackers or concurrent users can trigger stack memory reuse across requests, causing cross-tenant document content corruption by silently overwriting one caller's dictionary string values with another caller's data.

There is a stored cross site scripting issue in Esri Portal for ArcGIS versions 11.5 and prior that may allow a remote, administratively privileged attacker to inject malicious code that could potentially execute arbitrary in a victim’s browser. Users working with ArcGIS Enterprise 11.1, 11.3, and 11.5 are encouraged to patch. All users are advised to upgrade to the latest long-term support release.

There is a reflected cross site scripting vulnerability in Esri Portal for ArcGIS versions 11.5 and prior which may allow a remote, unauthenticated attacker to create a crafted link which when clicked could potentially execute arbitrary JavaScript code in the victim’s browser. Users working with ArcGIS Enterprise 11.1, 11.3, and 11.5 are encouraged to patch. All users are advised to upgrade to the latest long-term support release. Users working with ArcGIS Web App Builder developer edition are advised to migrate to ArcGIS Experience Builder, as ArcGIS Web App Builder developer edition is unsupported when this CVE is assigned.

There is a stored cross site scripting issue in Esri Portal for ArcGIS versions 11.5 and prior that may allow a remote, privileged attacker to inject malicious code that could potentially execute arbitrary in a victim’s browser. Users working with ArcGIS Enterprise 11.1, 11.3, and 11.5 are encouraged to patch. All users are advised to upgrade to the latest long-term support release.