CVE Feed

IBM Storage TS4500 Library 1.1.1.6 through 1.12.0.3 IBM Diamondback Tape Library and IBM Storage TS4500 Library could allow an authenticated user to cause a denial of service using specially crafted SMTP requests that would consume excessive amounts of system resources.

IBM Storage TS4500 Library 1.1.1.6 through 1.12.0.3 does not invalidate session after a logout which could allow an authenticated user to impersonate another user on the system.

IBM Storage TS4500 Library 1.1.1.6 through 1.12.0.3 IBM TS4500 Tape Library/Diamondback Tape Library does not invalidate session which could allow an authenticated user to impersonate another user on the system.

IBM Storage TS4500 Library 1.1.1.6 through 1.12.0.3 could allow a remote authenticated attacker to gain unauthorized administrative privileges due to a race condition.

The Bluetooth Classic Hands-Free Profile HF role in subsys/bluetooth/host/classic/hfp_hf.c does not release the AT command buffers that are still queued on hf->tx_pending when the RFCOMM DLC goes down. hfp_hf_disconnected() only cancelled the work items and cleared hf->acl, and no other code path ever dequeues those buffers, so each one is permanently lost from the fixed hf_pool (CONFIG_BT_MAX_CONN + 1 buffers, i.e. two in the default configuration). The same function also left BT_HFP_HF_FLAG_CONNECTED set, and hfp_hf_create() wiped the object with memset() as soon as hf->acl was NULL, without checking whether hf->work, hf->slc_work or hf->deferred_work was still pending or running. The remote Audio Gateway peer controls the trigger end to end and needs no application involvement: an unsolicited +BCS: 1 response makes bcs_handle() call bt_hfp_hf_select_codec() and queue an AT+BCS buffer, which cannot be transmitted while BT_HFP_HF_FLAG_RX_ONGOING is set, and an immediately following RFCOMM DISC strands that buffer. Repeating the connect / +BCS / disconnect cycle a couple of times empties hf_pool for good. With the pool exhausted, HFP command sending fails permanently, and because hfp_hf_send_cmd() allocates with K_FOREVER (bt_rfcomm_create_pdu() → bt_conn_create_pdu()) from the Bluetooth RX context — where that timeout is not downgraded to K_NO_WAIT — one further +BCS from the peer parks the Bluetooth RX thread inside net_buf_alloc() with no possible waker, halting all HCI event processing until the device is rebooted. Separately, reusing the HF slot while a work handler was still queued or running allowed memset() to wipe live k_work items out from under the system workqueue, corrupting shared kernel workqueue state. Exploitation requires an established HFP session (for SSP devices L2CAP enforces authentication before the RFCOMM channel is reachable) and a build with CONFIG_BT_HFP_HF enabled.

The user-mode syscall verifier z_vrfy_rtio_cqe_get_mempool_buffer() in subsys/rtio/rtio_syscalls.c validated its two output parameters, buff and buff_len, with K_SYSCALL_MEMORY_READ() rather than K_SYSCALL_MEMORY_WRITE(). Both are pure out-parameters: z_impl_rtio_cqe_get_mempool_buffer() stores the mempool buffer address and its length through them. The distinction is enforced by every architecture validator — arch_buffer_validate() on RISC-V PMP explicitly accepts the global __rom_region/__rodata_region for reads only, and the ARM MPU validators accept P_RO_U_RO and P_RW_U_RO regions for reads only — so a read-validated pointer is not necessarily writable by the calling thread. An unprivileged user-mode thread that has been granted access to an RTIO context (rtio_access_grant()) can invoke the rtio_cqe_get_mempool_buffer() syscall with buff/buff_len pointing at memory it may read but not write, and with a completion-queue entry whose flags field it fully controls (only RTIO_CQE_FLAG_MEMPOOL_BUFFER in flags[7:0] is required; flags[19:8] and flags[31:20] supply the block index and count). The kernel then performs a pointer-sized and a 4-byte store through those addresses while running in supervisor mode. Reaching the store requires CONFIG_USERSPACE together with CONFIG_RTIO_SYS_MEM_BLOCKS, the configuration behind RTIO_DEFINE_WITH_MEMPOOL; without the latter the implementation returns -ENOTSUP and writes nothing. Two outcomes follow. If the target lies in a memory-domain partition declared K_MEM_PARTITION_P_RW_U_RO (privileged read-write, user read-only), the kernel-mode store succeeds and deposits partly attacker-chosen values into memory the memory domain had marked read-only for that thread, bypassing the partition's write protection. If the target lies in globally readable but unwritable memory such as .text/.rodata in flash, the store faults in kernel mode; the fault is delivered to z_fatal_error() and the default k_sys_fatal_error_handler() halts or reboots the device, giving an unprivileged thread a reliable full denial of service. The read-permission check does bound the damage: the address must still be readable by the calling thread, so kernel-private memory cannot be targeted and no confidential data is disclosed. The fix replaces both checks with K_SYSCALL_MEMORY_WRITE(), so a thread lacking write permission is terminated by K_OOPS before the implementation runs; the cqe argument correctly remains read-validated.

A weakness has been identified in H3C Magic NX15 V100R017. This affects the function importprofile of the file /api/upload. This manipulation of the argument fileName causes path traversal. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure.

A vulnerability was determined in H3C Magic NX15 NX15V100R017. Impacted is the function write of the file /api/esps of the component RPC Interface. Executing a manipulation of the argument path can lead to code injection. The attack can be executed remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure.

The html_to_markdown expansion module in MISP Modules contains a server-side request forgery (SSRF) vulnerability in its is_safe_url() URL validation function. The BLOCKED_RANGES list used to reject unsafe destination addresses was incomplete, omitting several critical IP address ranges. Specifically, the following ranges were not blocked: 0.0.0.0/8 (unspecified, which routes to loopback on Linux), 100.64.0.0/10 (carrier-grade NAT per RFC 6598), ::/128 (IPv6 unspecified), fc00::/7 (IPv6 Unique Local Addresses), and fe80::/10 (IPv6 link-local). The existing list only covered IPv4 loopback (127.0.0.0/8), RFC 1918 private ranges, IPv4 link-local (169.254.0.0/16), and IPv6 loopback (::1/128). An authenticated user with the ability to create or modify MISP attributes that trigger the html_to_markdown expansion module could supply URLs pointing to these unblocked internal address ranges. Because the module fetches the URL server-side to convert HTML content to Markdown, the request is made from the MISP server's network context. This allows an attacker to probe and read responses from internal services, carrier-grade NAT infrastructure, or link-local endpoints that would otherwise be unreachable from external networks. IPv4-mapped IPv6 forms (e.g., [::ffff:0.0.0.0]) also bypassed the existing checks. The security impact is primarily confidentiality: an attacker can read data served by internal services reachable from the MISP server. The MISP instance itself is not compromised, but it is abused as a proxy to access otherwise restricted network resources.

A vulnerability was found in H3C Magic NX15 100R017. This issue affects the function sub_416874 of the file /usr/bin/usrlist. Performing a manipulation results in os command injection. Remote exploitation of the attack is possible. The exploit has been made public and could be used. The vendor was contacted early about this disclosure.

Pillow is a Python imaging library. Prior to 13.0.0, Pillow's XBM header parser is vulnerable to regular-expression denial of service. In XbmImageFile._open, when an application calls Image.open() on a small crafted XBM file, XbmImagePlugin applies a backtracking expression to the attacker-controlled header before image dimensions are accepted, stalling a worker for minutes and denying service. This issue is fixed in version 13.0.0.

Pillow is a Python imaging library. From 2.6.0 until 13.0.0, Pillow is vulnerable to argument injection when invoking Ghostscript for EPS input. EpsImagePlugin.Ghostscript passes a caller-controlled input filename after -f without converting it to a safe absolute path, so a name beginning with a hyphen can be interpreted as a Ghostscript option. An attacker who controls the filename can inject Ghostscript arguments. Arbitrary command execution specifically requires a leading @ argument-file filename and control of the referenced text file containing additional Ghostscript arguments; the reported chain reproduces with the default -dSAFER invocation. This issue is fixed in version 13.0.0.

Pillow is a Python imaging library. From 9.1.0 until 13.0.0, Pillow can disclose uninitialized stack memory when Image.quantize() uses an empty palette. ImagingPaletteCacheUpdate() leaves a local cache array uninitialized when the palette has zero entries, and the conversion path emits those bytes as output pixel indices. An attacker who controls the palette image can obtain stack contents from a returned PNG or GIF. This can disclose addresses and stack-canary data without an out-of-bounds access, memory corruption, or process crash. This issue is fixed in version 13.0.0.

Pillow is a Python imaging library. From 5.3.0 until 13.0.0, Pillow can return uninitialized memory as pixels when libtiff performs a short decode of JPEG-compressed or Group 4 fax TIFF data. The _decodeStrip and _decodeTile buffers can be larger than the bytes written by libtiff, but Pillow converts the expected rows without clearing the unwritten tail. The tile path is affected from 5.3.0 and the strip path from 6.0.0. An attacker can supply a crafted TIFF to an application that loads and returns or re-encodes its pixels. This can disclose stale heap contents without memory corruption or a process crash. This issue is fixed in version 13.0.0.

Pillow is a Python imaging library. Prior to 13.0.0, Pillow's TIFF encoder can read beyond a ColorMap buffer when retained TIFF metadata has a plane size inconsistent with BitsPerSample. A small TIFF can be opened normally and then retain a crafted ColorMap that is reused when the image is saved. An application that re-encodes the attacker's TIFF with libtiff can trigger the out-of-bounds read. This can disclose heap memory in the output or crash the process. This issue is fixed in version 13.0.0.

Pillow is a Python imaging library. From 5.1.0 until 13.0.0, Pillow can exhaust resources while parsing an existing PDF during an append operation. PdfParser follows page-tree child references without cycle or duplication tracking and follows previous-trailer chains with only an exact repeated-offset guard, so deep or cyclic page trees and long chains of unique trailer offsets can exhaust the Python stack. Repeated non-cyclic /Kids references can also cause super-linear CPU and memory use. An attacker can supply such a PDF to an application that calls Image.save with PDF append enabled. This can raise an uncaught RecursionError or consume excessive CPU and memory before output is written, causing denial of service. This issue is fixed in version 13.0.0.

Pillow is a Python imaging library. From 5.1.0 until 13.0.0, Pillow takes quadratic time to reserve PDF object identifiers when saving many frames with save_all enabled. PdfParser.next_object_id() repeatedly rebuilds and scans all previously reserved identifiers for every object. An attacker can supply a multi-frame image, including a small APNG with a large declared frame count, to an application that converts it to a multipage PDF. This can consume excessive CPU and deny service. This issue is fixed in version 13.0.0.

Pillow is a Python imaging library. From 10.0.0 until 13.0.0, Pillow can free an invalid glyph pointer during FreeType rendering with an active stroker. If FT_Load_Glyph fails, cleanup may call FT_Done_Glyph on an uninitialized or stale glyph variable. An attacker can supply a malformed font as untrusted bytes to an application that draws text with a nonzero stroke width, forcing the glyph-load failure path. This can corrupt memory or crash the process. This issue is fixed in version 13.0.0.

A vulnerability has been found in Dolibarr up to 23.0.2. The impacted element is an unknown function of the file htdocs/document.php of the component CSP. Such manipulation leads to protection mechanism failure. The attack can be executed remotely. Upgrading to version 24.0.0 is sufficient to resolve this issue. The name of the patch is 9f9ffa288d4ad2632c1d5dd88272c699a592f4ec. You should upgrade the affected component.

Pillow is a Python imaging library. From 4.1.0 until 13.0.0, Pillow's MSP RLE decoder can expand a small file into an unbounded in-memory buffer. The decoder writes run-length output to BytesIO without limiting expansion to the declared image size. An attacker can supply a crafted MSP image to an application that loads its pixels. This can exhaust memory and deny service even when the declared pixel count passes the decompression-bomb check. This issue is fixed in version 13.0.0.

Pillow is a Python imaging library. From 9.2.0 until 13.0.0, Pillow performs quadratic copying when saving a GIF with a long comment. _get_global_header() repeatedly copies portions of comment data while assembling the global header, including comments retained from an untrusted input image. An attacker can supply an image with a large GIF comment to an application that saves it as GIF. This can consume excessive CPU and delay or deny service. This issue is fixed in version 13.0.0.

Pillow is a Python imaging library. From 5.1.0 until 13.0.0, Pillow can enter an infinite loop while rewriting PDF pages. PdfParser.rewrite_pages() follows Parent relationships without detecting a cycle in the page tree. An attacker can supply a cyclic PDF to an application that appends an image to that PDF. This can hold the worker at full CPU and deny service. This issue is fixed in version 13.0.0.

A security vulnerability has been detected in Netis EAP930 1.250905.115454. This issue affects the function return200 of the file /cgi-bin/debug of the component CGI Endpoint. The manipulation of the argument SIGNATURE leads to backdoor. The attack may be initiated remotely. A high degree of complexity is needed for the attack. The exploitability is assessed as difficult. The vendor was contacted early about this disclosure but did not respond in any way.

Pillow is a Python imaging library. From 12.0.0 until 13.0.0, Pillow's Image.merge() can dereference a null image8 plane. Validation skips the first input band, allowing a 32-bit integer or floating-point image backed by image32 storage to be merged as a narrower multiband image. A crafted IPTC file can reach this path when an application opens and loads it, or a caller can invoke Image.merge() directly with such a first band. This causes a native process crash. This issue is fixed in version 13.0.0.

Pillow is a Python imaging library. From 8.1.0 until 13.0.0, Pillow's TIFF tile and RGBA decode paths can read beyond row data produced by libtiff. In _decodeTile and the RGBA unpacker path, when Pillow and libtiff interpret duplicated PhotometricInterpretation or BitsPerSample tags differently, Pillow does not verify that the required input row fits inside the row libtiff produced, while the strip path has this validation. Loading pixels from such a crafted TIFF can expose adjacent heap data in output pixels or crash the process. This issue is fixed in version 13.0.0.

TP-Link Tapo C210 V3.60 may expose shared credential material and cryptographic metadata through unauthenticated DS JSON API requests. The exposed shared credential can be accepted by the Streamd Digest authentication mechanism as an administrative password, allowing an unauthenticated adjacent-network attacker to establish encrypted media sessions without knowledge of the device account password.  Successful exploitation may disclose credential and cryptographic material and allow unauthorized access to encrypted media sessions.

TP-Link Tapo C210 V3.60 contains an authentication bypass vulnerability in the DS JSON API. A crafted JSON request containing both a protected operation and public onboarding-related fields may cause module-level authorization checks to be applied inconsistently, allowing protected camera operations, including pan-tilt-zoom control, to be executed without a valid authenticated session.  Successful exploitation may allow an unauthenticated attacker on the adjacent network to perform protected camera operations, including pan-tilt-zoom (PTZ) control, without a valid authenticated session. This could result in unauthorized manipulation of camera functionality.

Pillow is a Python imaging library. Prior to 13.0.0, Pillow's JPEG decoder can write a full-width scanline into a buffer sized for a requested draft scale. ImagingJpegDecode does not verify libjpeg's actual output width and component count after scaling is requested, and an 8-bit lossless SOF3 JPEG decoded by a build linked to libjpeg-turbo 3.x can ignore the requested downscaling geometry. An attacker can supply such a JPEG to an application that uses draft() or thumbnail() to request downscaling. This can corrupt heap memory, crash the process, or potentially allow code execution. Older libjpeg-turbo 2.x and IJG builds reject the SOF3 input. This issue is fixed in version 13.0.0.

Pillow is a Python imaging library. Prior to 13.0.0, Pillow can double free image memory when ImagingScaleAffine encounters a selective allocation failure. The affected fast path handles Transform.EXTENT or pure scale-and-translate Transform.AFFINE operations with the default NEAREST resampling. The output image allocation must succeed while the additional per-column lookup allocation fails, after which the error path deletes image storage that later cleanup releases again. An attacker who can drive such a large Image.transform() operation under memory pressure may trigger the failure. This can crash the process and may corrupt memory. This issue is fixed in version 13.0.0.

Pillow is a Python imaging library. Prior to 13.0.0, Pillow's ImageMorph.MorphOp.apply() can access memory before a row buffer for a zero-width image. PPM and PGM input can create an image with width zero, and the native morphology routine indexes outrow[width - 1] without rejecting that geometry. An attacker can supply such an image to an application that applies a morphology operation. This can crash the process. This issue is fixed in version 13.0.0.

Pillow is a Python imaging library. Prior to 13.0.0, Pillow's rank-based filters can dereference invalid image storage for a zero-size image. ImagingExpand() allocates a non-empty output and then faults while replicating edges by reading the first pixel from empty input storage; ImagingRankFilter is never reached. An attacker can supply or cause creation of a zero-size image to an application that applies a rank, median, minimum, or maximum filter. This causes a native process crash. This issue is fixed in version 13.0.0.

Pillow is a Python imaging library. From 5.4.0 until 13.0.0, Pillow performs quadratic copying while parsing GIF comments. GifImageFile._seek() repeatedly appends immutable bytes for comment sub-blocks and multiple comment extensions, and frame zero is parsed during Image.open(). An attacker can submit a small-dimension GIF containing many comment extensions to any application that opens the file. This can consume excessive CPU and deny service before the application can inspect the image. This issue is fixed in version 13.0.0.

A weakness has been identified in TiBillet Lespass up to 10e87909c5d526dffa6d424c104fc12860740537. This vulnerability affects the function get_img_from_url of the file ApiBillet/serializers.py of the component APIv1. Executing a manipulation of the argument img_url/image_url can lead to server-side request forgery. The attack can be launched remotely. A high complexity level is associated with this attack. It is stated that the exploitability is difficult. The vendor confirms: "[T]he fix (destination IP validation, redirect re-checks, timeout and size limit on remote image download) is already planned in our v2 API, which replaces the affected v1 endpoints. The v1 API, including the three affected serializers, will be removed in our next major release."

Pillow is a Python imaging library. From 9.2.0 until 13.0.0, Pillow can retain a rejected GIF frame size after a decompression-bomb exception. In GifImageFile._seek, a crafted GIF can leave rejected dimensions stored after Image.DecompressionBombError; if an application catches that exception and continues processing the same image object, later seek or load operations allocate according to those dimensions and can exhaust memory, denying service. This issue is fixed in version 13.0.0.

Pillow is a Python imaging library. From 8.1.0 until 13.0.0, Pillow can allocate an APNG disposal background at the full canvas size before applying the decompression-bomb check. A crafted APNG with a small first frame, a very large declared canvas, and background disposal or first-frame OP_PREVIOUS reaches PngImageFile._seek while Image.open() positions frame zero. The full-canvas allocation occurs inside Image.open() without requiring pixel loading or frame iteration. This can exhaust memory and deny service. This issue is fixed in version 13.0.0.

Pillow is a Python imaging library. Prior to 13.0.0, Pillow's FlashPix JPEG-tile decoder can write decoded scanlines beyond the allocated tile buffer. FlashPix (FPX) JPEG decoding selects raw mode LA with two bytes per pixel, while an unrecognized JPEG mode can be decoded as JCS_UNKNOWN with four components, causing ImagingJpegDecode to write four-component scanlines into the two-byte tile buffer. An attacker can supply a crafted OLE2 FlashPix file to an application with the optional olefile dependency installed that opens or thumbnails untrusted input. This can corrupt heap memory and may allow arbitrary code execution. This issue is fixed in version 13.0.0.

MLflow 3.17.1 and earlier contains a path traversal vulnerability in the FileStore tracking backend that allows unauthenticated attackers to control filesystem paths by submitting a crafted trace ID containing traversal sequences to the POST /api/3.0/mlflow/traces endpoint. Attackers can exploit FileStore.start_trace() to write trace_info.yaml, request_metadata, and tag files with attacker-controlled metadata outside the intended experiment trace directory, subject to the server process's filesystem permissions. FileStore is the default tracking backend before MLflow 3.7.0 and opt-in thereafter (the default changed to a SQLite database), so deployments in the earlier part of the affected range are vulnerable without special configuration while later ones are affected only when FileStore is explicitly selected.

Pillow is a Python imaging library. From 11.3.0 until 13.0.0, Pillow has a heap use-after-free when libtiff rejects a tag while encoding TIFF data to an in-memory buffer. When an application saves attacker-influenced TIFF tags to BytesIO, libtiff can reject a tag during encoding in ImagingLibTiffEncode; the error path then frees the output buffer without closing or clearing the TIFF handle, and later cleanup flushes through the write callback into freed memory, which can crash the process and may enable code execution. This issue is fixed in version 13.0.0.

A weakness has been identified in kiwilan php-archive up to 2.3.02. This affects the function ArchiveZip::extract of the file src/Readers/ArchiveZip.php of the component Extraction. This manipulation causes path traversal. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

Pillow is a Python imaging library. From 8.2.0 until 13.0.0, Pillow's tiled-TIFF decoder can read past the tile buffer while copying four-byte pixels. In _decodeTile, libtiff can return a tile allocation smaller than the required row stride multiplied by the tile length, and Pillow's stride-and-copy loop walks beyond that allocation. An attacker can supply a crafted tiled TIFF to an application that loads it. This can expose adjacent heap data in pixels or crash the process. This issue is fixed in version 13.0.0.

Plack::Middleware::ETag versions from 0.04 before 0.06 for Perl disclose file inode numbers in the default ETag header. When the response body is a filehandle and the file_etag option is not set, the ETag is built from the file's inode number, modification time and size. Clients receiving affected responses may use the disclosed inode numbers to aid backend fingerprinting and correlation of files served through different URLs.

Pillow is a Python imaging library. Prior to 13.0.0, Pillow's P;2L and P;4L raw decoders can read past the end of an input buffer. ImagingRawDecode calculates a packed-pixel row size, while the unpackers read separately padded bit planes. A caller can supply a buffer and image dimensions whose accepted size is smaller than the unpacker's actual footprint. This can disclose up to three adjacent heap bytes in output pixels or crash the process. This issue is fixed in version 13.0.0.

Pillow is a Python imaging library. From 2.0.0 until 13.0.0, Pillow has a heap buffer overflow and stale-heap disclosure in _tiffWriteProc when saving compressed TIFF data through libtiff to a target without a usable fileno(), such as BytesIO. The callback sizes its allocation from the prior buffer size instead of the current write position, allowing an attacker-controlled out-of-line TIFF tag or retained ICC profile to be copied beyond the allocation after libtiff seeks forward. This overflow can crash the process and may allow code execution. Independently, unwritten alignment gaps in compressed TIFF output larger than 64 KiB can disclose stale heap bytes without a crafted tag. File paths and targets with real file descriptors are unaffected. This issue is fixed in version 13.0.0.

A security flaw has been discovered in orbitale imagemagick-php up to 3.3.5. Affected by this issue is the function Command::font of the file src/Command.php. The manipulation of the argument fontFile results in os command injection. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

Pillow is a Python imaging library. From 5.1.0 until 13.0.0, Pillow's PdfParser.get_value() can recurse without a limit while reading nested PDF objects. The parser follows attacker-controlled arrays and dictionaries when an existing PDF is opened for append. An attacker can provide a deeply nested PDF to an application that saves an image with PDF append enabled. This can raise an uncaught RecursionError or terminate the worker, causing denial of service. This issue is fixed in version 13.0.0.

The OSDP Control Panel reply parser cp_decode_response() in subsys/mgmt/osdp/src/osdp_cp.c decodes replies from a Peripheral Device into a stack-allocated struct osdp_event. For the REPLY_KEYPPAD and REPLY_RAW reply types, the payload length is taken from the received frame and the only validation performed is that the declared length is self-consistent with the number of payload bytes present in the frame. Because the attacker controls both the length field and the frame length, that check imposes no bound, and the subsequent memcpy() writes into the fixed 64-byte data arrays of struct osdp_event_keypress / struct osdp_event_cardread (OSDP_EVENT_MAX_DATALEN). The sibling REPLY_FMT handler in the same switch already carried the missing > OSDP_EVENT_MAX_DATALEN bound. The defect is reached from cp_process_reply(), which reads bytes from the OSDP RS-485 channel and passes them through osdp_phy_check_packet() and osdp_phy_decode_packet() before dispatching on the reply ID. Triggering it requires CONFIG_OSDP with CONFIG_OSDP_MODE_CP and an application event callback registered (the normal Control Panel integration), plus a frame carrying a correct SOM, a valid CRC-16, and a matching 2-bit sequence number — all of which are computable or observable by anyone on the bus. No check ties the reply ID to the outstanding command, so an oversized REPLY_KEYPPAD or REPLY_RAW is accepted as the answer to a routine CMD_POLL. A malicious or compromised card reader, or anyone with access to the RS-485 wiring, can supply such a frame; CONFIG_OSDP_SC_ENABLED only helps while a secure channel is active, and a single unauthenticated frame carrying a bad MAC causes sc_deactivate(), after which plaintext replies are again accepted. With the default CONFIG_OSDP_UART_BUFFER_LENGTH of 256, roughly 180 bytes of fully attacker-chosen data can be written past the end of the stack-allocated event object, over saved registers and the return address on typical Cortex-M and RISC-V frame layouts (Zephyr does not enable stack canaries by default). The impact ranges from a hard crash of the access-control panel to potential control-flow hijack in the context of the OSDP receive thread. The fix adds an OSDP_EVENT_MAX_DATALEN bound to both handlers, capping each memcpy() at the size of its destination.

The UpdateHub firmware-over-the-air client parses the CoAP probe response with Zephyr's JSON library in z_impl_updatehub_probe() (subsys/mgmt/updatehub/updatehub.c). The decoder treats every descriptor field as optional — json_obj_parse() returns a bitmask of the fields it actually decoded and never fails on a missing one — so a response that omits the "sha256sum" string leaves the corresponding const char * in the zero-initialised struct resp_probe_any_boards / struct resp_probe_some_boards at NULL. Both metadata branches then computed sha256size = strlen(...objects.sha256sum) + 1 before any validation, dereferencing that NULL pointer; the SHA256_HEX_DIGEST_SIZE test that follows operates on a value the bad read has already produced and cannot prevent it. The metadata is supplied entirely by the network peer: probe_cb() accepts the datagram, runs coap_packet_parse() and copies the payload with no token matching and no cryptographic check. With CONFIG_UPDATEHUB_DTLS unset — the default — start_coap_client() uses plain CoAP over UDP on port 5683 with no peer authentication and resolves the server via unauthenticated DNS, so an on-path attacker, a DNS spoofer, or an off-path attacker who wins the race with a forged source address can deliver the malformed metadata. A probe response as simple as "objects":[[{}],[{}]] suffices, and no user interaction is required because updatehub_autohandler() polls on CONFIG_UPDATEHUB_POLL_INTERVAL. When CONFIG_UPDATEHUB_DTLS=y the trigger narrows to a malicious or compromised update server. The primitive is a read at address zero, not a write, so the impact is availability only. On targets where the low address range is unmapped or protected — MMU-based architectures, builds with CONFIG_NULL_POINTER_EXCEPTION_DETECTION_DWT/_MPU/_PMP, TrustZone non-secure images, and SoCs such as nRF54L whose 0x0–0x400 window is unmapped — the load faults and Zephyr's default fatal handler halts the system, giving a remotely re-triggerable denial of service on every poll. On classic Cortex-M targets where the vector table is readable at address zero the walk usually terminates immediately and the request is rejected by the length check, so the outcome is configuration- and SoC-dependent. There is no memory write, and the copied bytes are only compared against the locally computed image hash, so there is no information-disclosure channel. The fix adds an explicit sha256sum == NULL test that returns UPDATEHUB_METADATA_ERROR ahead of the strlen() in both metadata branches. Debug builds (CONFIG_UPDATEHUB_LOG_LEVEL=4) still format the same pointers with %s in a LOG_DBG() loop that runs before the new checks, so that variant remains in debug configurations only.

Pillow is a Python imaging library. From 7.2.0 until 13.0.0, Pillow can enter an infinite loop while determining the frame count of a MIC image. MicImageFile inherits TIFF frame traversal, but MicImageFile.tell reports the OLE stream index and its seek() resets TIFF frame state, so an embedded TIFF with at least three IFDs never advances. When an application with olefile installed reads n_frames or saves all frames from a crafted MIC file, the non-advancing traversal can hold a worker at full CPU indefinitely. This issue is fixed in version 13.0.0.

A vulnerability was identified in DiffSK configobj up to 5.0.9. Affected by this vulnerability is the function _sectionmarker of the file configobj/__init__.py. The manipulation leads to inefficient regular expression complexity. Remote exploitation of the attack is possible. The project was informed of the problem early through an issue report but has not responded yet.

A vulnerability was determined in smrealms smr up to f40380c017bc35cd8db6ffdb9d4e78bf65b9d43d. Affected is the function isUrlReachable of the file src/pages/Account/AlbumEditProcessor.php of the component Album Website. Executing a manipulation of the argument Website can lead to server-side request forgery. The attack may be launched remotely. The exploit has been publicly disclosed and may be utilized. This product operates on a rolling release basis, ensuring continuous delivery. Consequently, there are no version details for either affected or updated releases. This patch is called cb402e7f4e70b617b59d8c55dbe926b951ceb4a8. Applying a patch is advised to resolve this issue. The vendor was contacted early, responded in a very professional manner and quickly released a fixed version of the affected product.