CVE Feed

This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: avs: Fix null-ptr-deref in avs_component_probe() devm_kasprintf() returns NULL when memory allocation fails. Currently, avs_component_probe() does not check for this case, which results in a NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: free routing table on probe failure If complete = true in dsa_tree_setup(), it means that we are the last switch of the tree which is successfully probing, and we should be setting up all switches from our probe path. After "complete" becomes true, dsa_tree_setup_cpu_ports() or any subsequent function may fail. If that happens, the entire tree setup is in limbo: the first N-1 switches have successfully finished probing (doing nothing but having allocated persistent memory in the tree's dst->ports, and maybe dst->rtable), and switch N failed to probe, ending the tree setup process before anything is tangible from the user's PoV. If switch N fails to probe, its memory (ports) will be freed and removed from dst->ports. However, the dst->rtable elements pointing to its ports, as created by dsa_link_touch(), will remain there, and will lead to use-after-free if dereferenced. If dsa_tree_setup_switches() returns -EPROBE_DEFER, which is entirely possible because that is where ds->ops->setup() is, we get a kasan report like this: ================================================================== BUG: KASAN: slab-use-after-free in mv88e6xxx_setup_upstream_port+0x240/0x568 Read of size 8 at addr ffff000004f56020 by task kworker/u8:3/42 Call trace: __asan_report_load8_noabort+0x20/0x30 mv88e6xxx_setup_upstream_port+0x240/0x568 mv88e6xxx_setup+0xebc/0x1eb0 dsa_register_switch+0x1af4/0x2ae0 mv88e6xxx_register_switch+0x1b8/0x2a8 mv88e6xxx_probe+0xc4c/0xf60 mdio_probe+0x78/0xb8 really_probe+0x2b8/0x5a8 __driver_probe_device+0x164/0x298 driver_probe_device+0x78/0x258 __device_attach_driver+0x274/0x350 Allocated by task 42: __kasan_kmalloc+0x84/0xa0 __kmalloc_cache_noprof+0x298/0x490 dsa_switch_touch_ports+0x174/0x3d8 dsa_register_switch+0x800/0x2ae0 mv88e6xxx_register_switch+0x1b8/0x2a8 mv88e6xxx_probe+0xc4c/0xf60 mdio_probe+0x78/0xb8 really_probe+0x2b8/0x5a8 __driver_probe_device+0x164/0x298 driver_probe_device+0x78/0x258 __device_attach_driver+0x274/0x350 Freed by task 42: __kasan_slab_free+0x48/0x68 kfree+0x138/0x418 dsa_register_switch+0x2694/0x2ae0 mv88e6xxx_register_switch+0x1b8/0x2a8 mv88e6xxx_probe+0xc4c/0xf60 mdio_probe+0x78/0xb8 really_probe+0x2b8/0x5a8 __driver_probe_device+0x164/0x298 driver_probe_device+0x78/0x258 __device_attach_driver+0x274/0x350 The simplest way to fix the bug is to delete the routing table in its entirety. dsa_tree_setup_routing_table() has no problem in regenerating it even if we deleted links between ports other than those of switch N, because dsa_link_touch() first checks whether the port pair already exists in dst->rtable, allocating if not. The deletion of the routing table in its entirety already exists in dsa_tree_teardown(), so refactor that into a function that can also be called from the tree setup error path. In my analysis of the commit to blame, it is the one which added dsa_link elements to dst->rtable. Prior to that, each switch had its own ds->rtable which is freed when the switch fails to probe. But the tree is potentially persistent memory.

In the Linux kernel, the following vulnerability has been resolved: net: ti: icss-iep: Fix possible NULL pointer dereference for perout request The ICSS IEP driver tracks perout and pps enable state with flags. Currently when disabling pps and perout signals during icss_iep_exit(), results in NULL pointer dereference for perout. To fix the null pointer dereference issue, the icss_iep_perout_enable_hw function can be modified to directly clear the IEP CMP registers when disabling PPS or PEROUT, without referencing the ptp_perout_request structure, as its contents are irrelevant in this case.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix the warning from __kernel_write_iter [ 2110.972290] ------------[ cut here ]------------ [ 2110.972301] WARNING: CPU: 3 PID: 735 at fs/read_write.c:599 __kernel_write_iter+0x21b/0x280 This patch doesn't allow writing to directory.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in __smb2_lease_break_noti() Move tcp_transport free to ksmbd_conn_free. If ksmbd connection is referenced when ksmbd server thread terminates, It will not be freed, but conn->tcp_transport is freed. __smb2_lease_break_noti can be performed asynchronously when the connection is disconnected. __smb2_lease_break_noti calls ksmbd_conn_write, which can cause use-after-free when conn->ksmbd_transport is already freed.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm/smu11: Prevent division by zero The user can set any speed value. If speed is greater than UINT_MAX/8, division by zero is possible. Found by Linux Verification Center (linuxtesting.org) with SVACE. (cherry picked from commit da7dc714a8f8e1c9fc33c57cd63583779a3bef71)

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Prevent division by zero The user can set any speed value. If speed is greater than UINT_MAX/8, division by zero is possible. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Prevent division by zero The user can set any speed value. If speed is greater than UINT_MAX/8, division by zero is possible. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: drm/imagination: take paired job reference For paired jobs, have the fragment job take a reference on the geometry job, so that the geometry job cannot be freed until the fragment job has finished with it. The geometry job structure is accessed when the fragment job is being prepared by the GPU scheduler. Taking the reference prevents the geometry job being freed until the fragment job no longer requires it. Fixes a use after free bug detected by KASAN: [ 124.256386] BUG: KASAN: slab-use-after-free in pvr_queue_prepare_job+0x108/0x868 [powervr] [ 124.264893] Read of size 1 at addr ffff0000084cb960 by task kworker/u16:4/63

In the Linux kernel, the following vulnerability has been resolved: drm/virtio: Fix missed dmabuf unpinning in error path of prepare_fb() Correct error handling in prepare_fb() to fix leaking resources when error happens.

In the Linux kernel, the following vulnerability has been resolved: mm/vma: add give_up_on_oom option on modify/merge, use in uffd release Currently, if a VMA merge fails due to an OOM condition arising on commit merge or a failure to duplicate anon_vma's, we report this so the caller can handle it. However there are cases where the caller is only ostensibly trying a merge, and doesn't mind if it fails due to this condition. Since we do not want to introduce an implicit assumption that we only actually modify VMAs after OOM conditions might arise, add a 'give up on oom' option and make an explicit contract that, should this flag be set, we absolutely will not modify any VMAs should OOM arise and just bail out. Since it'd be very unusual for a user to try to vma_modify() with this flag set but be specifying a range within a VMA which ends up being split (which can fail due to rlimit issues, not only OOM), we add a debug warning for this condition. The motivating reason for this is uffd release - syzkaller (and Pedro Falcato's VERY astute analysis) found a way in which an injected fault on allocation, triggering an OOM condition on commit merge, would result in uffd code becoming confused and treating an error value as if it were a VMA pointer. To avoid this, we make use of this new VMG flag to ensure that this never occurs, utilising the fact that, should we be clearing entire VMAs, we do not wish an OOM event to be reported to us. Many thanks to Pedro Falcato for his excellent analysis and Jann Horn for his insightful and intelligent analysis of the situation, both of whom were instrumental in this fix.

In the Linux kernel, the following vulnerability has been resolved: drm/i915/huc: Fix fence not released on early probe errors HuC delayed loading fence, introduced with commit 27536e03271da ("drm/i915/huc: track delayed HuC load with a fence"), is registered with object tracker early on driver probe but unregistered only from driver remove, which is not called on early probe errors. Since its memory is allocated under devres, then released anyway, it may happen to be allocated again to the fence and reused on future driver probes, resulting in kernel warnings that taint the kernel: <4> [309.731371] ------------[ cut here ]------------ <3> [309.731373] ODEBUG: init destroyed (active state 0) object: ffff88813d7dd2e0 object type: i915_sw_fence hint: sw_fence_dummy_notify+0x0/0x20 [i915] <4> [309.731575] WARNING: CPU: 2 PID: 3161 at lib/debugobjects.c:612 debug_print_object+0x93/0xf0 ... <4> [309.731693] CPU: 2 UID: 0 PID: 3161 Comm: i915_module_loa Tainted: G U 6.14.0-CI_DRM_16362-gf0fd77956987+ #1 ... <4> [309.731700] RIP: 0010:debug_print_object+0x93/0xf0 ... <4> [309.731728] Call Trace: <4> [309.731730] <TASK> ... <4> [309.731949] __debug_object_init+0x17b/0x1c0 <4> [309.731957] debug_object_init+0x34/0x50 <4> [309.732126] __i915_sw_fence_init+0x34/0x60 [i915] <4> [309.732256] intel_huc_init_early+0x4b/0x1d0 [i915] <4> [309.732468] intel_uc_init_early+0x61/0x680 [i915] <4> [309.732667] intel_gt_common_init_early+0x105/0x130 [i915] <4> [309.732804] intel_root_gt_init_early+0x63/0x80 [i915] <4> [309.732938] i915_driver_probe+0x1fa/0xeb0 [i915] <4> [309.733075] i915_pci_probe+0xe6/0x220 [i915] <4> [309.733198] local_pci_probe+0x44/0xb0 <4> [309.733203] pci_device_probe+0xf4/0x270 <4> [309.733209] really_probe+0xee/0x3c0 <4> [309.733215] __driver_probe_device+0x8c/0x180 <4> [309.733219] driver_probe_device+0x24/0xd0 <4> [309.733223] __driver_attach+0x10f/0x220 <4> [309.733230] bus_for_each_dev+0x7d/0xe0 <4> [309.733236] driver_attach+0x1e/0x30 <4> [309.733239] bus_add_driver+0x151/0x290 <4> [309.733244] driver_register+0x5e/0x130 <4> [309.733247] __pci_register_driver+0x7d/0x90 <4> [309.733251] i915_pci_register_driver+0x23/0x30 [i915] <4> [309.733413] i915_init+0x34/0x120 [i915] <4> [309.733655] do_one_initcall+0x62/0x3f0 <4> [309.733667] do_init_module+0x97/0x2a0 <4> [309.733671] load_module+0x25ff/0x2890 <4> [309.733688] init_module_from_file+0x97/0xe0 <4> [309.733701] idempotent_init_module+0x118/0x330 <4> [309.733711] __x64_sys_finit_module+0x77/0x100 <4> [309.733715] x64_sys_call+0x1f37/0x2650 <4> [309.733719] do_syscall_64+0x91/0x180 <4> [309.733763] entry_SYSCALL_64_after_hwframe+0x76/0x7e <4> [309.733792] </TASK> ... <4> [309.733806] ---[ end trace 0000000000000000 ]--- That scenario is most easily reproducible with igt@i915_module_load@reload-with-fault-injection. Fix the issue by moving the cleanup step to driver release path. (cherry picked from commit 795dbde92fe5c6996a02a5b579481de73035e7bf)

This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

In the Linux kernel, the following vulnerability has been resolved: net: libwx: handle page_pool_dev_alloc_pages error page_pool_dev_alloc_pages could return NULL. There was a WARN_ON(!page) but it would still proceed to use the NULL pointer and then crash. This is similar to commit 001ba0902046 ("net: fec: handle page_pool_dev_alloc_pages error"). This is found by our static analysis tool KNighter.

In the Linux kernel, the following vulnerability has been resolved: nfs4: Fix kmemleak when allocate slot failed If one of the slot allocate failed, should cleanup all the other allocated slots, otherwise, the allocated slots will leak: unreferenced object 0xffff8881115aa100 (size 64): comm ""mount.nfs"", pid 679, jiffies 4294744957 (age 115.037s) hex dump (first 32 bytes): 00 cc 19 73 81 88 ff ff 00 a0 5a 11 81 88 ff ff ...s......Z..... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000007a4c434a>] nfs4_find_or_create_slot+0x8e/0x130 [<000000005472a39c>] nfs4_realloc_slot_table+0x23f/0x270 [<00000000cd8ca0eb>] nfs40_init_client+0x4a/0x90 [<00000000128486db>] nfs4_init_client+0xce/0x270 [<000000008d2cacad>] nfs4_set_client+0x1a2/0x2b0 [<000000000e593b52>] nfs4_create_server+0x300/0x5f0 [<00000000e4425dd2>] nfs4_try_get_tree+0x65/0x110 [<00000000d3a6176f>] vfs_get_tree+0x41/0xf0 [<0000000016b5ad4c>] path_mount+0x9b3/0xdd0 [<00000000494cae71>] __x64_sys_mount+0x190/0x1d0 [<000000005d56bdec>] do_syscall_64+0x35/0x80 [<00000000687c9ae4>] entry_SYSCALL_64_after_hwframe+0x46/0xb0

In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix null-ptr-deref in ib_core_cleanup() KASAN reported a null-ptr-deref error: KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f] CPU: 1 PID: 379 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:destroy_workqueue+0x2f/0x740 RSP: 0018:ffff888016137df8 EFLAGS: 00000202 ... Call Trace: ib_core_cleanup+0xa/0xa1 [ib_core] __do_sys_delete_module.constprop.0+0x34f/0x5b0 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fa1a0d221b7 ... It is because the fail of roce_gid_mgmt_init() is ignored: ib_core_init() roce_gid_mgmt_init() gid_cache_wq = alloc_ordered_workqueue # fail ... ib_core_cleanup() roce_gid_mgmt_cleanup() destroy_workqueue(gid_cache_wq) # destroy an unallocated wq Fix this by catching the fail of roce_gid_mgmt_init() in ib_core_init().

In the Linux kernel, the following vulnerability has been resolved: net: dsa: Fix possible memory leaks in dsa_loop_init() kmemleak reported memory leaks in dsa_loop_init(): kmemleak: 12 new suspected memory leaks unreferenced object 0xffff8880138ce000 (size 2048): comm "modprobe", pid 390, jiffies 4295040478 (age 238.976s) backtrace: [<000000006a94f1d5>] kmalloc_trace+0x26/0x60 [<00000000a9c44622>] phy_device_create+0x5d/0x970 [<00000000d0ee2afc>] get_phy_device+0xf3/0x2b0 [<00000000dca0c71f>] __fixed_phy_register.part.0+0x92/0x4e0 [<000000008a834798>] fixed_phy_register+0x84/0xb0 [<0000000055223fcb>] dsa_loop_init+0xa9/0x116 [dsa_loop] ... There are two reasons for memleak in dsa_loop_init(). First, fixed_phy_register() create and register phy_device: fixed_phy_register() get_phy_device() phy_device_create() # freed by phy_device_free() phy_device_register() # freed by phy_device_remove() But fixed_phy_unregister() only calls phy_device_remove(). So the memory allocated in phy_device_create() is leaked. Second, when mdio_driver_register() fail in dsa_loop_init(), it just returns and there is no cleanup for phydevs. Fix the problems by catching the error of mdio_driver_register() in dsa_loop_init(), then calling both fixed_phy_unregister() and phy_device_free() to release phydevs. Also add a function for phydevs cleanup to avoid duplacate.

In the Linux kernel, the following vulnerability has been resolved: IB/hfi1: Correctly move list in sc_disable() Commit 13bac861952a ("IB/hfi1: Fix abba locking issue with sc_disable()") incorrectly tries to move a list from one list head to another. The result is a kernel crash. The crash is triggered when a link goes down and there are waiters for a send to complete. The following signature is seen: BUG: kernel NULL pointer dereference, address: 0000000000000030 [...] Call Trace: sc_disable+0x1ba/0x240 [hfi1] pio_freeze+0x3d/0x60 [hfi1] handle_freeze+0x27/0x1b0 [hfi1] process_one_work+0x1b0/0x380 ? process_one_work+0x380/0x380 worker_thread+0x30/0x360 ? process_one_work+0x380/0x380 kthread+0xd7/0x100 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 The fix is to use the correct call to move the list.

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix deadlock in nilfs_count_free_blocks() A semaphore deadlock can occur if nilfs_get_block() detects metadata corruption while locating data blocks and a superblock writeback occurs at the same time: task 1 task 2 ------ ------ * A file operation * nilfs_truncate() nilfs_get_block() down_read(rwsem A) <-- nilfs_bmap_lookup_contig() ... generic_shutdown_super() nilfs_put_super() * Prepare to write superblock * down_write(rwsem B) <-- nilfs_cleanup_super() * Detect b-tree corruption * nilfs_set_log_cursor() nilfs_bmap_convert_error() nilfs_count_free_blocks() __nilfs_error() down_read(rwsem A) <-- nilfs_set_error() down_write(rwsem B) <-- *** DEADLOCK *** Here, nilfs_get_block() readlocks rwsem A (= NILFS_MDT(dat_inode)->mi_sem) and then calls nilfs_bmap_lookup_contig(), but if it fails due to metadata corruption, __nilfs_error() is called from nilfs_bmap_convert_error() inside the lock section. Since __nilfs_error() calls nilfs_set_error() unless the filesystem is read-only and nilfs_set_error() attempts to writelock rwsem B (= nilfs->ns_sem) to write back superblock exclusively, hierarchical lock acquisition occurs in the order rwsem A -> rwsem B. Now, if another task starts updating the superblock, it may writelock rwsem B during the lock sequence above, and can deadlock trying to readlock rwsem A in nilfs_count_free_blocks(). However, there is actually no need to take rwsem A in nilfs_count_free_blocks() because it, within the lock section, only reads a single integer data on a shared struct with nilfs_sufile_get_ncleansegs(). This has been the case after commit aa474a220180 ("nilfs2: add local variable to cache the number of clean segments"), that is, even before this bug was introduced. So, this resolves the deadlock problem by just not taking the semaphore in nilfs_count_free_blocks().

In the Linux kernel, the following vulnerability has been resolved: can: af_can: fix NULL pointer dereference in can_rx_register() It causes NULL pointer dereference when testing as following: (a) use syscall(__NR_socket, 0x10ul, 3ul, 0) to create netlink socket. (b) use syscall(__NR_sendmsg, ...) to create bond link device and vxcan link device, and bind vxcan device to bond device (can also use ifenslave command to bind vxcan device to bond device). (c) use syscall(__NR_socket, 0x1dul, 3ul, 1) to create CAN socket. (d) use syscall(__NR_bind, ...) to bind the bond device to CAN socket. The bond device invokes the can-raw protocol registration interface to receive CAN packets. However, ml_priv is not allocated to the dev, dev_rcv_lists is assigned to NULL in can_rx_register(). In this case, it will occur the NULL pointer dereference issue. The following is the stack information: BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 122a4067 P4D 122a4067 PUD 1223c067 PMD 0 Oops: 0000 [#1] PREEMPT SMP RIP: 0010:can_rx_register+0x12d/0x1e0 Call Trace: <TASK> raw_enable_filters+0x8d/0x120 raw_enable_allfilters+0x3b/0x130 raw_bind+0x118/0x4f0 __sys_bind+0x163/0x1a0 __x64_sys_bind+0x1e/0x30 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK>

In the Linux kernel, the following vulnerability has been resolved: net: tun: Fix memory leaks of napi_get_frags kmemleak reports after running test_progs: unreferenced object 0xffff8881b1672dc0 (size 232): comm "test_progs", pid 394388, jiffies 4354712116 (age 841.975s) hex dump (first 32 bytes): e0 84 d7 a8 81 88 ff ff 80 2c 67 b1 81 88 ff ff .........,g..... 00 40 c5 9b 81 88 ff ff 00 00 00 00 00 00 00 00 .@.............. backtrace: [<00000000c8f01748>] napi_skb_cache_get+0xd4/0x150 [<0000000041c7fc09>] __napi_build_skb+0x15/0x50 [<00000000431c7079>] __napi_alloc_skb+0x26e/0x540 [<000000003ecfa30e>] napi_get_frags+0x59/0x140 [<0000000099b2199e>] tun_get_user+0x183d/0x3bb0 [tun] [<000000008a5adef0>] tun_chr_write_iter+0xc0/0x1b1 [tun] [<0000000049993ff4>] do_iter_readv_writev+0x19f/0x320 [<000000008f338ea2>] do_iter_write+0x135/0x630 [<000000008a3377a4>] vfs_writev+0x12e/0x440 [<00000000a6b5639a>] do_writev+0x104/0x280 [<00000000ccf065d8>] do_syscall_64+0x3b/0x90 [<00000000d776e329>] entry_SYSCALL_64_after_hwframe+0x63/0xcd The issue occurs in the following scenarios: tun_get_user() napi_gro_frags() napi_frags_finish() case GRO_NORMAL: gro_normal_one() list_add_tail(&skb->list, &napi->rx_list); <-- While napi->rx_count < READ_ONCE(gro_normal_batch), <-- gro_normal_list() is not called, napi->rx_list is not empty <-- not ask to complete the gro work, will cause memory leaks in <-- following tun_napi_del() ... tun_napi_del() netif_napi_del() __netif_napi_del() <-- &napi->rx_list is not empty, which caused memory leaks To fix, add napi_complete() after napi_gro_frags().

In the Linux kernel, the following vulnerability has been resolved: bpftool: Fix NULL pointer dereference when pin {PROG, MAP, LINK} without FILE When using bpftool to pin {PROG, MAP, LINK} without FILE, segmentation fault will occur. The reson is that the lack of FILE will cause strlen to trigger NULL pointer dereference. The corresponding stacktrace is shown below: do_pin do_pin_any do_pin_fd mount_bpffs_for_pin strlen(name) <- NULL pointer dereference Fix it by adding validation to the common process.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix general-protection-fault in ieee80211_subif_start_xmit() When device is running and the interface status is changed, the gpf issue is triggered. The problem triggering process is as follows: Thread A: Thread B ieee80211_runtime_change_iftype() process_one_work() ... ... ieee80211_do_stop() ... ... ... sdata->bss = NULL ... ... ieee80211_subif_start_xmit() ieee80211_multicast_to_unicast //!sdata->bss->multicast_to_unicast cause gpf issue When the interface status is changed, the sending queue continues to send packets. After the bss is set to NULL, the bss is accessed. As a result, this causes a general-protection-fault issue. The following is the stack information: general protection fault, probably for non-canonical address 0xdffffc000000002f: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000178-0x000000000000017f] Workqueue: mld mld_ifc_work RIP: 0010:ieee80211_subif_start_xmit+0x25b/0x1310 Call Trace: <TASK> dev_hard_start_xmit+0x1be/0x990 __dev_queue_xmit+0x2c9a/0x3b60 ip6_finish_output2+0xf92/0x1520 ip6_finish_output+0x6af/0x11e0 ip6_output+0x1ed/0x540 mld_sendpack+0xa09/0xe70 mld_ifc_work+0x71c/0xdb0 process_one_work+0x9bf/0x1710 worker_thread+0x665/0x1080 kthread+0x2e4/0x3a0 ret_from_fork+0x1f/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: fix memory leak in query_regdb_file() In the function query_regdb_file() the alpha2 parameter is duplicated using kmemdup() and subsequently freed in regdb_fw_cb(). However, request_firmware_nowait() can fail without calling regdb_fw_cb() and thus leak memory.

In the Linux kernel, the following vulnerability has been resolved: ACPI: APEI: Fix integer overflow in ghes_estatus_pool_init() Change num_ghes from int to unsigned int, preventing an overflow and causing subsequent vmalloc() to fail. The overflow happens in ghes_estatus_pool_init() when calculating len during execution of the statement below as both multiplication operands here are signed int: len += (num_ghes * GHES_ESOURCE_PREALLOC_MAX_SIZE); The following call trace is observed because of this bug: [ 9.317108] swapper/0: vmalloc error: size 18446744071562596352, exceeds total pages, mode:0xcc0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0-1 [ 9.317131] Call Trace: [ 9.317134] <TASK> [ 9.317137] dump_stack_lvl+0x49/0x5f [ 9.317145] dump_stack+0x10/0x12 [ 9.317146] warn_alloc.cold+0x7b/0xdf [ 9.317150] ? __device_attach+0x16a/0x1b0 [ 9.317155] __vmalloc_node_range+0x702/0x740 [ 9.317160] ? device_add+0x17f/0x920 [ 9.317164] ? dev_set_name+0x53/0x70 [ 9.317166] ? platform_device_add+0xf9/0x240 [ 9.317168] __vmalloc_node+0x49/0x50 [ 9.317170] ? ghes_estatus_pool_init+0x43/0xa0 [ 9.317176] vmalloc+0x21/0x30 [ 9.317177] ghes_estatus_pool_init+0x43/0xa0 [ 9.317179] acpi_hest_init+0x129/0x19c [ 9.317185] acpi_init+0x434/0x4a4 [ 9.317188] ? acpi_sleep_proc_init+0x2a/0x2a [ 9.317190] do_one_initcall+0x48/0x200 [ 9.317195] kernel_init_freeable+0x221/0x284 [ 9.317200] ? rest_init+0xe0/0xe0 [ 9.317204] kernel_init+0x1a/0x130 [ 9.317205] ret_from_fork+0x22/0x30 [ 9.317208] </TASK> [ rjw: Subject and changelog edits ]

In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Check for NULL cpu_buffer in ring_buffer_wake_waiters() On some machines the number of listed CPUs may be bigger than the actual CPUs that exist. The tracing subsystem allocates a per_cpu directory with access to the per CPU ring buffer via a cpuX file. But to save space, the ring buffer will only allocate buffers for online CPUs, even though the CPU array will be as big as the nr_cpu_ids. With the addition of waking waiters on the ring buffer when closing the file, the ring_buffer_wake_waiters() now needs to make sure that the buffer is allocated (with the irq_work allocated with it) before trying to wake waiters, as it will cause a NULL pointer dereference. While debugging this, I added a NULL check for the buffer itself (which is OK to do), and also NULL pointer checks against buffer->buffers (which is not fine, and will WARN) as well as making sure the CPU number passed in is within the nr_cpu_ids (which is also not fine if it isn't). Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=1204705

In the Linux kernel, the following vulnerability has been resolved: tracing: kprobe: Fix memory leak in test_gen_kprobe/kretprobe_cmd() test_gen_kprobe_cmd() only free buf in fail path, hence buf will leak when there is no failure. Move kfree(buf) from fail path to common path to prevent the memleak. The same reason and solution in test_gen_kretprobe_cmd(). unreferenced object 0xffff888143b14000 (size 2048): comm "insmod", pid 52490, jiffies 4301890980 (age 40.553s) hex dump (first 32 bytes): 70 3a 6b 70 72 6f 62 65 73 2f 67 65 6e 5f 6b 70 p:kprobes/gen_kp 72 6f 62 65 5f 74 65 73 74 20 64 6f 5f 73 79 73 robe_test do_sys backtrace: [<000000006d7b836b>] kmalloc_trace+0x27/0xa0 [<0000000009528b5b>] 0xffffffffa059006f [<000000008408b580>] do_one_initcall+0x87/0x2a0 [<00000000c4980a7e>] do_init_module+0xdf/0x320 [<00000000d775aad0>] load_module+0x3006/0x3390 [<00000000e9a74b80>] __do_sys_finit_module+0x113/0x1b0 [<000000003726480d>] do_syscall_64+0x35/0x80 [<000000003441e93b>] entry_SYSCALL_64_after_hwframe+0x46/0xb0

In the Linux kernel, the following vulnerability has been resolved: cxl/pmem: Fix cxl_pmem_region and cxl_memdev leak When a cxl_nvdimm object goes through a ->remove() event (device physically removed, nvdimm-bridge disabled, or nvdimm device disabled), then any associated regions must also be disabled. As highlighted by the cxl-create-region.sh test [1], a single device may host multiple regions, but the driver was only tracking one region at a time. This leads to a situation where only the last enabled region per nvdimm device is cleaned up properly. Other regions are leaked, and this also causes cxl_memdev reference leaks. Fix the tracking by allowing cxl_nvdimm objects to track multiple region associations.

In the Linux kernel, the following vulnerability has been resolved: net, neigh: Fix null-ptr-deref in neigh_table_clear() When IPv6 module gets initialized but hits an error in the middle, kenel panic with: KASAN: null-ptr-deref in range [0x0000000000000598-0x000000000000059f] CPU: 1 PID: 361 Comm: insmod Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:__neigh_ifdown.isra.0+0x24b/0x370 RSP: 0018:ffff888012677908 EFLAGS: 00000202 ... Call Trace: <TASK> neigh_table_clear+0x94/0x2d0 ndisc_cleanup+0x27/0x40 [ipv6] inet6_init+0x21c/0x2cb [ipv6] do_one_initcall+0xd3/0x4d0 do_init_module+0x1ae/0x670 ... Kernel panic - not syncing: Fatal exception When ipv6 initialization fails, it will try to cleanup and calls: neigh_table_clear() neigh_ifdown(tbl, NULL) pneigh_queue_purge(&tbl->proxy_queue, dev_net(dev == NULL)) # dev_net(NULL) triggers null-ptr-deref. Fix it by passing NULL to pneigh_queue_purge() in neigh_ifdown() if dev is NULL, to make kernel not panic immediately.

In the Linux kernel, the following vulnerability has been resolved: scsi: scsi_transport_sas: Fix error handling in sas_phy_add() If transport_add_device() fails in sas_phy_add(), the kernel will crash trying to delete the device in transport_remove_device() called from sas_remove_host(). Unable to handle kernel NULL pointer dereference at virtual address 0000000000000108 CPU: 61 PID: 42829 Comm: rmmod Kdump: loaded Tainted: G W 6.1.0-rc1+ #173 pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : device_del+0x54/0x3d0 lr : device_del+0x37c/0x3d0 Call trace: device_del+0x54/0x3d0 attribute_container_class_device_del+0x28/0x38 transport_remove_classdev+0x6c/0x80 attribute_container_device_trigger+0x108/0x110 transport_remove_device+0x28/0x38 sas_phy_delete+0x30/0x60 [scsi_transport_sas] do_sas_phy_delete+0x6c/0x80 [scsi_transport_sas] device_for_each_child+0x68/0xb0 sas_remove_children+0x40/0x50 [scsi_transport_sas] sas_remove_host+0x20/0x38 [scsi_transport_sas] hisi_sas_remove+0x40/0x68 [hisi_sas_main] hisi_sas_v2_remove+0x20/0x30 [hisi_sas_v2_hw] platform_remove+0x2c/0x60 Fix this by checking and handling return value of transport_add_device() in sas_phy_add().

In the Linux kernel, the following vulnerability has been resolved: ASoC: core: Fix use-after-free in snd_soc_exit() KASAN reports a use-after-free: BUG: KASAN: use-after-free in device_del+0xb5b/0xc60 Read of size 8 at addr ffff888008655050 by task rmmod/387 CPU: 2 PID: 387 Comm: rmmod Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Call Trace: <TASK> dump_stack_lvl+0x79/0x9a print_report+0x17f/0x47b kasan_report+0xbb/0xf0 device_del+0xb5b/0xc60 platform_device_del.part.0+0x24/0x200 platform_device_unregister+0x2e/0x40 snd_soc_exit+0xa/0x22 [snd_soc_core] __do_sys_delete_module.constprop.0+0x34f/0x5b0 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd ... </TASK> It's bacause in snd_soc_init(), snd_soc_util_init() is possble to fail, but its ret is ignored, which makes soc_dummy_dev unregistered twice. snd_soc_init() snd_soc_util_init() platform_device_register_simple(soc_dummy_dev) platform_driver_register() # fail platform_device_unregister(soc_dummy_dev) platform_driver_register() # success ... snd_soc_exit() snd_soc_util_exit() # soc_dummy_dev will be unregistered for second time To fix it, handle error and stop snd_soc_init() when util_init() fail. Also clean debugfs when util_init() or driver_register() fail.

In the Linux kernel, the following vulnerability has been resolved: phy: qcom-qmp-combo: fix NULL-deref on runtime resume Commit fc64623637da ("phy: qcom-qmp-combo,usb: add support for separate PCS_USB region") started treating the PCS_USB registers as potentially separate from the PCS registers but used the wrong base when no PCS_USB offset has been provided. Fix the PCS_USB base used at runtime resume to prevent dereferencing a NULL pointer on platforms that do not provide a PCS_USB offset (e.g. SC7180).

In the Linux kernel, the following vulnerability has been resolved: net: wwan: iosm: fix memory leak in ipc_pcie_read_bios_cfg ipc_pcie_read_bios_cfg() is using the acpi_evaluate_dsm() to obtain the wwan power state configuration from BIOS but is not freeing the acpi_object. The acpi_evaluate_dsm() returned acpi_object to be freed. Free the acpi_object after use.

In the Linux kernel, the following vulnerability has been resolved: tipc: fix the msg->req tlv len check in tipc_nl_compat_name_table_dump_header This is a follow-up for commit 974cb0e3e7c9 ("tipc: fix uninit-value in tipc_nl_compat_name_table_dump") where it should have type casted sizeof(..) to int to work when TLV_GET_DATA_LEN() returns a negative value. syzbot reported a call trace because of it: BUG: KMSAN: uninit-value in ... tipc_nl_compat_name_table_dump+0x841/0xea0 net/tipc/netlink_compat.c:934 __tipc_nl_compat_dumpit+0xab2/0x1320 net/tipc/netlink_compat.c:238 tipc_nl_compat_dumpit+0x991/0xb50 net/tipc/netlink_compat.c:321 tipc_nl_compat_recv+0xb6e/0x1640 net/tipc/netlink_compat.c:1324 genl_family_rcv_msg_doit net/netlink/genetlink.c:731 [inline] genl_family_rcv_msg net/netlink/genetlink.c:775 [inline] genl_rcv_msg+0x103f/0x1260 net/netlink/genetlink.c:792 netlink_rcv_skb+0x3a5/0x6c0 net/netlink/af_netlink.c:2501 genl_rcv+0x3c/0x50 net/netlink/genetlink.c:803 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0xf3b/0x1270 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x1288/0x1440 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline]

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix NULL pointer dereference in svm_migrate_to_ram() ./drivers/gpu/drm/amd/amdkfd/kfd_migrate.c:985:58-62: ERROR: p is NULL but dereferenced.

In the Linux kernel, the following vulnerability has been resolved: net: wwan: mhi: fix memory leak in mhi_mbim_dellink MHI driver registers network device without setting the needs_free_netdev flag, and does NOT call free_netdev() when unregisters network device, which causes a memory leak. This patch sets needs_free_netdev to true when registers network device, which makes netdev subsystem call free_netdev() automatically after unregister_netdevice().

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix wrong reg type conversion in release_reference() Some helper functions will allocate memory. To avoid memory leaks, the verifier requires the eBPF program to release these memories by calling the corresponding helper functions. When a resource is released, all pointer registers corresponding to the resource should be invalidated. The verifier use release_references() to do this job, by apply __mark_reg_unknown() to each relevant register. It will give these registers the type of SCALAR_VALUE. A register that will contain a pointer value at runtime, but of type SCALAR_VALUE, which may allow the unprivileged user to get a kernel pointer by storing this register into a map. Using __mark_reg_not_init() while NOT allow_ptr_leaks can mitigate this problem.

In the Linux kernel, the following vulnerability has been resolved: media: meson: vdec: fix possible refcount leak in vdec_probe() v4l2_device_unregister need to be called to put the refcount got by v4l2_device_register when vdec_probe fails or vdec_remove is called.

In the Linux kernel, the following vulnerability has been resolved: capabilities: fix potential memleak on error path from vfs_getxattr_alloc() In cap_inode_getsecurity(), we will use vfs_getxattr_alloc() to complete the memory allocation of tmpbuf, if we have completed the memory allocation of tmpbuf, but failed to call handler->get(...), there will be a memleak in below logic: |-- ret = (int)vfs_getxattr_alloc(mnt_userns, ...) | /* ^^^ alloc for tmpbuf */ |-- value = krealloc(*xattr_value, error + 1, flags) | /* ^^^ alloc memory */ |-- error = handler->get(handler, ...) | /* error! */ |-- *xattr_value = value | /* xattr_value is &tmpbuf (memory leak!) */ So we will try to free(tmpbuf) after vfs_getxattr_alloc() fails to fix it. [PM: subject line and backtrace tweaks]

In the Linux kernel, the following vulnerability has been resolved: ibmvnic: Free rwi on reset success Free the rwi structure in the event that the last rwi in the list processed successfully. The logic in commit 4f408e1fa6e1 ("ibmvnic: retry reset if there are no other resets") introduces an issue that results in a 32 byte memory leak whenever the last rwi in the list gets processed.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix memory leak in vhci_write Syzkaller reports a memory leak as follows: ==================================== BUG: memory leak unreferenced object 0xffff88810d81ac00 (size 240): [...] hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff838733d9>] __alloc_skb+0x1f9/0x270 net/core/skbuff.c:418 [<ffffffff833f742f>] alloc_skb include/linux/skbuff.h:1257 [inline] [<ffffffff833f742f>] bt_skb_alloc include/net/bluetooth/bluetooth.h:469 [inline] [<ffffffff833f742f>] vhci_get_user drivers/bluetooth/hci_vhci.c:391 [inline] [<ffffffff833f742f>] vhci_write+0x5f/0x230 drivers/bluetooth/hci_vhci.c:511 [<ffffffff815e398d>] call_write_iter include/linux/fs.h:2192 [inline] [<ffffffff815e398d>] new_sync_write fs/read_write.c:491 [inline] [<ffffffff815e398d>] vfs_write+0x42d/0x540 fs/read_write.c:578 [<ffffffff815e3cdd>] ksys_write+0x9d/0x160 fs/read_write.c:631 [<ffffffff845e0645>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff845e0645>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 [<ffffffff84600087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd ==================================== HCI core will uses hci_rx_work() to process frame, which is queued to the hdev->rx_q tail in hci_recv_frame() by HCI driver. Yet the problem is that, HCI core may not free the skb after handling ACL data packets. To be more specific, when start fragment does not contain the L2CAP length, HCI core just copies skb into conn->rx_skb and finishes frame process in l2cap_recv_acldata(), without freeing the skb, which triggers the above memory leak. This patch solves it by releasing the relative skb, after processing the above case in l2cap_recv_acldata().

In the Linux kernel, the following vulnerability has been resolved: iio: trigger: sysfs: fix possible memory leak in iio_sysfs_trig_init() dev_set_name() allocates memory for name, it need be freed when device_add() fails, call put_device() to give up the reference that hold in device_initialize(), so that it can be freed in kobject_cleanup() when the refcount hit to 0. Fault injection test can trigger this: unreferenced object 0xffff8e8340a7b4c0 (size 32): comm "modprobe", pid 243, jiffies 4294678145 (age 48.845s) hex dump (first 32 bytes): 69 69 6f 5f 73 79 73 66 73 5f 74 72 69 67 67 65 iio_sysfs_trigge 72 00 a7 40 83 8e ff ff 00 86 13 c4 f6 ee ff ff r..@............ backtrace: [<0000000074999de8>] __kmem_cache_alloc_node+0x1e9/0x360 [<00000000497fd30b>] __kmalloc_node_track_caller+0x44/0x1a0 [<000000003636c520>] kstrdup+0x2d/0x60 [<0000000032f84da2>] kobject_set_name_vargs+0x1e/0x90 [<0000000092efe493>] dev_set_name+0x4e/0x70

In the Linux kernel, the following vulnerability has been resolved: blk-mq: Fix kmemleak in blk_mq_init_allocated_queue There is a kmemleak caused by modprobe null_blk.ko unreferenced object 0xffff8881acb1f000 (size 1024): comm "modprobe", pid 836, jiffies 4294971190 (age 27.068s) hex dump (first 32 bytes): 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... ff ff ff ff ff ff ff ff 00 53 99 9e ff ff ff ff .........S...... backtrace: [<000000004a10c249>] kmalloc_node_trace+0x22/0x60 [<00000000648f7950>] blk_mq_alloc_and_init_hctx+0x289/0x350 [<00000000af06de0e>] blk_mq_realloc_hw_ctxs+0x2fe/0x3d0 [<00000000e00c1872>] blk_mq_init_allocated_queue+0x48c/0x1440 [<00000000d16b4e68>] __blk_mq_alloc_disk+0xc8/0x1c0 [<00000000d10c98c3>] 0xffffffffc450d69d [<00000000b9299f48>] 0xffffffffc4538392 [<0000000061c39ed6>] do_one_initcall+0xd0/0x4f0 [<00000000b389383b>] do_init_module+0x1a4/0x680 [<0000000087cf3542>] load_module+0x6249/0x7110 [<00000000beba61b8>] __do_sys_finit_module+0x140/0x200 [<00000000fdcfff51>] do_syscall_64+0x35/0x80 [<000000003c0f1f71>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 That is because q->ma_ops is set to NULL before blk_release_queue is called. blk_mq_init_queue_data blk_mq_init_allocated_queue blk_mq_realloc_hw_ctxs for (i = 0; i < set->nr_hw_queues; i++) { old_hctx = xa_load(&q->hctx_table, i); if (!blk_mq_alloc_and_init_hctx(.., i, ..)) [1] if (!old_hctx) break; xa_for_each_start(&q->hctx_table, j, hctx, j) blk_mq_exit_hctx(q, set, hctx, j); [2] if (!q->nr_hw_queues) [3] goto err_hctxs; err_exit: q->mq_ops = NULL; [4] blk_put_queue blk_release_queue if (queue_is_mq(q)) [5] blk_mq_release(q); [1]: blk_mq_alloc_and_init_hctx failed at i != 0. [2]: The hctxs allocated by [1] are moved to q->unused_hctx_list and will be cleaned up in blk_mq_release. [3]: q->nr_hw_queues is 0. [4]: Set q->mq_ops to NULL. [5]: queue_is_mq returns false due to [4]. And blk_mq_release will not be called. The hctxs in q->unused_hctx_list are leaked. To fix it, call blk_release_queue in exception path.

In the Linux kernel, the following vulnerability has been resolved: media: venus: hfi: add check to handle incorrect queue size qsize represents size of shared queued between driver and video firmware. Firmware can modify this value to an invalid large value. In such situation, empty_space will be bigger than the space actually available. Since new_wr_idx is not checked, so the following code will result in an OOB write. ... qsize = qhdr->q_size if (wr_idx >= rd_idx) empty_space = qsize - (wr_idx - rd_idx) .... if (new_wr_idx < qsize) { memcpy(wr_ptr, packet, dwords << 2) --> OOB write Add check to ensure qsize is within the allocated size while reading and writing packets into the queue.

In the Linux kernel, the following vulnerability has been resolved: PCI: vmd: Make vmd_dev::cfg_lock a raw_spinlock_t type The access to the PCI config space via pci_ops::read and pci_ops::write is a low-level hardware access. The functions can be accessed with disabled interrupts even on PREEMPT_RT. The pci_lock is a raw_spinlock_t for this purpose. A spinlock_t becomes a sleeping lock on PREEMPT_RT, so it cannot be acquired with disabled interrupts. The vmd_dev::cfg_lock is accessed in the same context as the pci_lock. Make vmd_dev::cfg_lock a raw_spinlock_t type so it can be used with interrupts disabled. This was reported as: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 Call Trace: rt_spin_lock+0x4e/0x130 vmd_pci_read+0x8d/0x100 [vmd] pci_user_read_config_byte+0x6f/0xe0 pci_read_config+0xfe/0x290 sysfs_kf_bin_read+0x68/0x90 [bigeasy: reword commit message] Tested-off-by: Luis Claudio R. Goncalves <[email protected]> [kwilczynski: commit log] [bhelgaas: add back report info from https://lore.kernel.org/lkml/[email protected]/]

In the Linux kernel, the following vulnerability has been resolved: sctp: detect and prevent references to a freed transport in sendmsg sctp_sendmsg() re-uses associations and transports when possible by doing a lookup based on the socket endpoint and the message destination address, and then sctp_sendmsg_to_asoc() sets the selected transport in all the message chunks to be sent. There's a possible race condition if another thread triggers the removal of that selected transport, for instance, by explicitly unbinding an address with setsockopt(SCTP_SOCKOPT_BINDX_REM), after the chunks have been set up and before the message is sent. This can happen if the send buffer is full, during the period when the sender thread temporarily releases the socket lock in sctp_wait_for_sndbuf(). This causes the access to the transport data in sctp_outq_select_transport(), when the association outqueue is flushed, to result in a use-after-free read. This change avoids this scenario by having sctp_transport_free() signal the freeing of the transport, tagging it as "dead". In order to do this, the patch restores the "dead" bit in struct sctp_transport, which was removed in commit 47faa1e4c50e ("sctp: remove the dead field of sctp_transport"). Then, in the scenario where the sender thread has released the socket lock in sctp_wait_for_sndbuf(), the bit is checked again after re-acquiring the socket lock to detect the deletion. This is done while holding a reference to the transport to prevent it from being freed in the process. If the transport was deleted while the socket lock was relinquished, sctp_sendmsg_to_asoc() will return -EAGAIN to let userspace retry the send. The bug was found by a private syzbot instance (see the error report [1] and the C reproducer that triggers it [2]).

Sematell ReplyOne 7.4.3.0 allows SSRF via the application server API.

Sematell ReplyOne 7.4.3.0 allows XSS via a ReplyDesk e-mail attachment name.

Sematell ReplyOne 7.4.3.0 has Insecure Permissions for the /rest/sessions endpoint.