CVE Feed

In the Linux kernel, the following vulnerability has been resolved: gfs2: Always check inode size of inline inodes Check if the inode size of stuffed (inline) inodes is within the allowed range when reading inodes from disk (gfs2_dinode_in()). This prevents us from on-disk corruption. The two checks in stuffed_readpage() and gfs2_unstuffer_page() that just truncate inline data to the maximum allowed size don't actually make sense, and they can be removed now as well.

In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: fix ->anon_vma race If an ->anon_vma is attached to the VMA, collapse_and_free_pmd() requires it to be locked. Page table traversal is allowed under any one of the mmap lock, the anon_vma lock (if the VMA is associated with an anon_vma), and the mapping lock (if the VMA is associated with a mapping); and so to be able to remove page tables, we must hold all three of them. retract_page_tables() bails out if an ->anon_vma is attached, but does this check before holding the mmap lock (as the comment above the check explains). If we racily merged an existing ->anon_vma (shared with a child process) from a neighboring VMA, subsequent rmap traversals on pages belonging to the child will be able to see the page tables that we are concurrently removing while assuming that nothing else can access them. Repeat the ->anon_vma check once we hold the mmap lock to ensure that there really is no concurrent page table access. Hitting this bug causes a lockdep warning in collapse_and_free_pmd(), in the line "lockdep_assert_held_write(&vma->anon_vma->root->rwsem)". It can also lead to use-after-free access.

In the Linux kernel, the following vulnerability has been resolved: net: allow small head cache usage with large MAX_SKB_FRAGS values Sabrina reported the following splat: WARNING: CPU: 0 PID: 1 at net/core/dev.c:6935 netif_napi_add_weight_locked+0x8f2/0xba0 Modules linked in: CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.14.0-rc1-net-00092-g011b03359038 #996 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 RIP: 0010:netif_napi_add_weight_locked+0x8f2/0xba0 Code: e8 c3 e6 6a fe 48 83 c4 28 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc c7 44 24 10 ff ff ff ff e9 8f fb ff ff e8 9e e6 6a fe <0f> 0b e9 d3 fe ff ff e8 92 e6 6a fe 48 8b 04 24 be ff ff ff ff 48 RSP: 0000:ffffc9000001fc60 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff88806ce48128 RCX: 1ffff11001664b9e RDX: ffff888008f00040 RSI: ffffffff8317ca42 RDI: ffff88800b325cb6 RBP: ffff88800b325c40 R08: 0000000000000001 R09: ffffed100167502c R10: ffff88800b3a8163 R11: 0000000000000000 R12: ffff88800ac1c168 R13: ffff88800ac1c168 R14: ffff88800ac1c168 R15: 0000000000000007 FS: 0000000000000000(0000) GS:ffff88806ce00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff888008201000 CR3: 0000000004c94001 CR4: 0000000000370ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> gro_cells_init+0x1ba/0x270 xfrm_input_init+0x4b/0x2a0 xfrm_init+0x38/0x50 ip_rt_init+0x2d7/0x350 ip_init+0xf/0x20 inet_init+0x406/0x590 do_one_initcall+0x9d/0x2e0 do_initcalls+0x23b/0x280 kernel_init_freeable+0x445/0x490 kernel_init+0x20/0x1d0 ret_from_fork+0x46/0x80 ret_from_fork_asm+0x1a/0x30 </TASK> irq event stamp: 584330 hardirqs last enabled at (584338): [<ffffffff8168bf87>] __up_console_sem+0x77/0xb0 hardirqs last disabled at (584345): [<ffffffff8168bf6c>] __up_console_sem+0x5c/0xb0 softirqs last enabled at (583242): [<ffffffff833ee96d>] netlink_insert+0x14d/0x470 softirqs last disabled at (583754): [<ffffffff8317c8cd>] netif_napi_add_weight_locked+0x77d/0xba0 on kernel built with MAX_SKB_FRAGS=45, where SKB_WITH_OVERHEAD(1024) is smaller than GRO_MAX_HEAD. Such built additionally contains the revert of the single page frag cache so that napi_get_frags() ends up using the page frag allocator, triggering the splat. Note that the underlying issue is independent from the mentioned revert; address it ensuring that the small head cache will fit either TCP and GRO allocation and updating napi_alloc_skb() and __netdev_alloc_skb() to select kmalloc() usage for any allocation fitting such cache.

A flaw was found in gnuplot. The plot3d_points() function may lead to a segmentation fault and cause a system crash.

In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: Fix overflow before widen in the bitmap_ip_create() function. When first_ip is 0, last_ip is 0xFFFFFFFF, and netmask is 31, the value of an arithmetic expression 2 << (netmask - mask_bits - 1) is subject to overflow due to a failure casting operands to a larger data type before performing the arithmetic. Note that it's harmless since the value will be checked at the next step. Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: Avoid use of GFP_KERNEL in atomic context Using GFP_KERNEL in preemption disable context, causing below warning when CONFIG_DEBUG_ATOMIC_SLEEP is enabled. [ 32.542271] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:274 [ 32.550883] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0 [ 32.558707] preempt_count: 1, expected: 0 [ 32.562710] RCU nest depth: 0, expected: 0 [ 32.566800] CPU: 3 PID: 1 Comm: swapper/0 Tainted: G W 6.2.0-rc2-00269-gae9dcb91c606 #7 [ 32.576188] Hardware name: Marvell CN106XX board (DT) [ 32.581232] Call trace: [ 32.583670] dump_backtrace.part.0+0xe0/0xf0 [ 32.587937] show_stack+0x18/0x30 [ 32.591245] dump_stack_lvl+0x68/0x84 [ 32.594900] dump_stack+0x18/0x34 [ 32.598206] __might_resched+0x12c/0x160 [ 32.602122] __might_sleep+0x48/0xa0 [ 32.605689] __kmem_cache_alloc_node+0x2b8/0x2e0 [ 32.610301] __kmalloc+0x58/0x190 [ 32.613610] otx2_sq_aura_pool_init+0x1a8/0x314 [ 32.618134] otx2_open+0x1d4/0x9d0 To avoid use of GFP_ATOMIC for memory allocation, disable preemption after all memory allocation is done.

In the Linux kernel, the following vulnerability has been resolved: drm/i915: Avoid potential vm use-after-free Adding the vm to the vm_xa table makes it visible to userspace, which could try to race with us to close the vm. So we need to take our extra reference before putting it in the table. (cherry picked from commit 99343c46d4e2b34c285d3d5f68ff04274c2f9fb4)

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on i_extra_isize in is_alive() syzbot found a f2fs bug: BUG: KASAN: slab-out-of-bounds in data_blkaddr fs/f2fs/f2fs.h:2891 [inline] BUG: KASAN: slab-out-of-bounds in is_alive fs/f2fs/gc.c:1117 [inline] BUG: KASAN: slab-out-of-bounds in gc_data_segment fs/f2fs/gc.c:1520 [inline] BUG: KASAN: slab-out-of-bounds in do_garbage_collect+0x386a/0x3df0 fs/f2fs/gc.c:1734 Read of size 4 at addr ffff888076557568 by task kworker/u4:3/52 CPU: 1 PID: 52 Comm: kworker/u4:3 Not tainted 6.1.0-rc4-syzkaller-00362-gfef7fd48922d #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Workqueue: writeback wb_workfn (flush-7:0) Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x15e/0x45d mm/kasan/report.c:395 kasan_report+0xbb/0x1f0 mm/kasan/report.c:495 data_blkaddr fs/f2fs/f2fs.h:2891 [inline] is_alive fs/f2fs/gc.c:1117 [inline] gc_data_segment fs/f2fs/gc.c:1520 [inline] do_garbage_collect+0x386a/0x3df0 fs/f2fs/gc.c:1734 f2fs_gc+0x88c/0x20a0 fs/f2fs/gc.c:1831 f2fs_balance_fs+0x544/0x6b0 fs/f2fs/segment.c:410 f2fs_write_inode+0x57e/0xe20 fs/f2fs/inode.c:753 write_inode fs/fs-writeback.c:1440 [inline] __writeback_single_inode+0xcfc/0x1440 fs/fs-writeback.c:1652 writeback_sb_inodes+0x54d/0xf90 fs/fs-writeback.c:1870 wb_writeback+0x2c5/0xd70 fs/fs-writeback.c:2044 wb_do_writeback fs/fs-writeback.c:2187 [inline] wb_workfn+0x2dc/0x12f0 fs/fs-writeback.c:2227 process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e4/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 The root cause is that we forgot to do sanity check on .i_extra_isize in below path, result in accessing invalid address later, fix it. - gc_data_segment - is_alive - data_blkaddr - offset_in_addr

In the Linux kernel, the following vulnerability has been resolved: ovl: fix UAF in ovl_dentry_update_reval by moving dput() in ovl_link_up The issue was caused by dput(upper) being called before ovl_dentry_update_reval(), while upper->d_flags was still accessed in ovl_dentry_remote(). Move dput(upper) after its last use to prevent use-after-free. BUG: KASAN: slab-use-after-free in ovl_dentry_remote fs/overlayfs/util.c:162 [inline] BUG: KASAN: slab-use-after-free in ovl_dentry_update_reval+0xd2/0xf0 fs/overlayfs/util.c:167 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:114 print_address_description mm/kasan/report.c:377 [inline] print_report+0xc3/0x620 mm/kasan/report.c:488 kasan_report+0xd9/0x110 mm/kasan/report.c:601 ovl_dentry_remote fs/overlayfs/util.c:162 [inline] ovl_dentry_update_reval+0xd2/0xf0 fs/overlayfs/util.c:167 ovl_link_up fs/overlayfs/copy_up.c:610 [inline] ovl_copy_up_one+0x2105/0x3490 fs/overlayfs/copy_up.c:1170 ovl_copy_up_flags+0x18d/0x200 fs/overlayfs/copy_up.c:1223 ovl_rename+0x39e/0x18c0 fs/overlayfs/dir.c:1136 vfs_rename+0xf84/0x20a0 fs/namei.c:4893 ... </TASK>

An issue in FoxCMS v.1.2.5 allows a remote attacker to execute arbitrary code via the case display page in the index.html component.

An out-of-memory error in the parseABC_NS_SET_INFO function of libming v0.4.8 allows attackers to cause a Denial of Service (DoS) due to allocator exhaustion.

libming v0.4.8 was discovered to contain a segmentation fault via the decompileGETPROPERTY function. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted SWF file.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix pointer-leak due to insufficient speculative store bypass mitigation To mitigate Spectre v4, 2039f26f3aca ("bpf: Fix leakage due to insufficient speculative store bypass mitigation") inserts lfence instructions after 1) initializing a stack slot and 2) spilling a pointer to the stack. However, this does not cover cases where a stack slot is first initialized with a pointer (subject to sanitization) but then overwritten with a scalar (not subject to sanitization because the slot was already initialized). In this case, the second write may be subject to speculative store bypass (SSB) creating a speculative pointer-as-scalar type confusion. This allows the program to subsequently leak the numerical pointer value using, for example, a branch-based cache side channel. To fix this, also sanitize scalars if they write a stack slot that previously contained a pointer. Assuming that pointer-spills are only generated by LLVM on register-pressure, the performance impact on most real-world BPF programs should be small. The following unprivileged BPF bytecode drafts a minimal exploit and the mitigation: [...] // r6 = 0 or 1 (skalar, unknown user input) // r7 = accessible ptr for side channel // r10 = frame pointer (fp), to be leaked // r9 = r10 # fp alias to encourage ssb *(u64 *)(r9 - 8) = r10 // fp[-8] = ptr, to be leaked // lfence added here because of pointer spill to stack. // // Ommitted: Dummy bpf_ringbuf_output() here to train alias predictor // for no r9-r10 dependency. // *(u64 *)(r10 - 8) = r6 // fp[-8] = scalar, overwrites ptr // 2039f26f3aca: no lfence added because stack slot was not STACK_INVALID, // store may be subject to SSB // // fix: also add an lfence when the slot contained a ptr // r8 = *(u64 *)(r9 - 8) // r8 = architecturally a scalar, speculatively a ptr // // leak ptr using branch-based cache side channel: r8 &= 1 // choose bit to leak if r8 == 0 goto SLOW // no mispredict // architecturally dead code if input r6 is 0, // only executes speculatively iff ptr bit is 1 r8 = *(u64 *)(r7 + 0) # encode bit in cache (0: slow, 1: fast) SLOW: [...] After running this, the program can time the access to *(r7 + 0) to determine whether the chosen pointer bit was 0 or 1. Repeat this 64 times to recover the whole address on amd64. In summary, sanitization can only be skipped if one scalar is overwritten with another scalar. Scalar-confusion due to speculative store bypass can not lead to invalid accesses because the pointer bounds deducted during verification are enforced using branchless logic. See 979d63d50c0c ("bpf: prevent out of bounds speculation on pointer arithmetic") for details. Do not make the mitigation depend on !env->allow_{uninit_stack,ptr_leaks} because speculative leaks are likely unexpected if these were enabled. For example, leaking the address to a protected log file may be acceptable while disabling the mitigation might unintentionally leak the address into the cached-state of a map that is accessible to unprivileged processes.

In the Linux kernel, the following vulnerability has been resolved: scsi: iscsi_tcp: Fix UAF during logout when accessing the shost ipaddress Bug report and analysis from Ding Hui. During iSCSI session logout, if another task accesses the shost ipaddress attr, we can get a KASAN UAF report like this: [ 276.942144] BUG: KASAN: use-after-free in _raw_spin_lock_bh+0x78/0xe0 [ 276.942535] Write of size 4 at addr ffff8881053b45b8 by task cat/4088 [ 276.943511] CPU: 2 PID: 4088 Comm: cat Tainted: G E 6.1.0-rc8+ #3 [ 276.943997] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 [ 276.944470] Call Trace: [ 276.944943] <TASK> [ 276.945397] dump_stack_lvl+0x34/0x48 [ 276.945887] print_address_description.constprop.0+0x86/0x1e7 [ 276.946421] print_report+0x36/0x4f [ 276.947358] kasan_report+0xad/0x130 [ 276.948234] kasan_check_range+0x35/0x1c0 [ 276.948674] _raw_spin_lock_bh+0x78/0xe0 [ 276.949989] iscsi_sw_tcp_host_get_param+0xad/0x2e0 [iscsi_tcp] [ 276.951765] show_host_param_ISCSI_HOST_PARAM_IPADDRESS+0xe9/0x130 [scsi_transport_iscsi] [ 276.952185] dev_attr_show+0x3f/0x80 [ 276.953005] sysfs_kf_seq_show+0x1fb/0x3e0 [ 276.953401] seq_read_iter+0x402/0x1020 [ 276.954260] vfs_read+0x532/0x7b0 [ 276.955113] ksys_read+0xed/0x1c0 [ 276.955952] do_syscall_64+0x38/0x90 [ 276.956347] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 276.956769] RIP: 0033:0x7f5d3a679222 [ 276.957161] Code: c0 e9 b2 fe ff ff 50 48 8d 3d 32 c0 0b 00 e8 a5 fe 01 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 [ 276.958009] RSP: 002b:00007ffc864d16a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 276.958431] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f5d3a679222 [ 276.958857] RDX: 0000000000020000 RSI: 00007f5d3a4fe000 RDI: 0000000000000003 [ 276.959281] RBP: 00007f5d3a4fe000 R08: 00000000ffffffff R09: 0000000000000000 [ 276.959682] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000020000 [ 276.960126] R13: 0000000000000003 R14: 0000000000000000 R15: 0000557a26dada58 [ 276.960536] </TASK> [ 276.961357] Allocated by task 2209: [ 276.961756] kasan_save_stack+0x1e/0x40 [ 276.962170] kasan_set_track+0x21/0x30 [ 276.962557] __kasan_kmalloc+0x7e/0x90 [ 276.962923] __kmalloc+0x5b/0x140 [ 276.963308] iscsi_alloc_session+0x28/0x840 [scsi_transport_iscsi] [ 276.963712] iscsi_session_setup+0xda/0xba0 [libiscsi] [ 276.964078] iscsi_sw_tcp_session_create+0x1fd/0x330 [iscsi_tcp] [ 276.964431] iscsi_if_create_session.isra.0+0x50/0x260 [scsi_transport_iscsi] [ 276.964793] iscsi_if_recv_msg+0xc5a/0x2660 [scsi_transport_iscsi] [ 276.965153] iscsi_if_rx+0x198/0x4b0 [scsi_transport_iscsi] [ 276.965546] netlink_unicast+0x4d5/0x7b0 [ 276.965905] netlink_sendmsg+0x78d/0xc30 [ 276.966236] sock_sendmsg+0xe5/0x120 [ 276.966576] ____sys_sendmsg+0x5fe/0x860 [ 276.966923] ___sys_sendmsg+0xe0/0x170 [ 276.967300] __sys_sendmsg+0xc8/0x170 [ 276.967666] do_syscall_64+0x38/0x90 [ 276.968028] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 276.968773] Freed by task 2209: [ 276.969111] kasan_save_stack+0x1e/0x40 [ 276.969449] kasan_set_track+0x21/0x30 [ 276.969789] kasan_save_free_info+0x2a/0x50 [ 276.970146] __kasan_slab_free+0x106/0x190 [ 276.970470] __kmem_cache_free+0x133/0x270 [ 276.970816] device_release+0x98/0x210 [ 276.971145] kobject_cleanup+0x101/0x360 [ 276.971462] iscsi_session_teardown+0x3fb/0x530 [libiscsi] [ 276.971775] iscsi_sw_tcp_session_destroy+0xd8/0x130 [iscsi_tcp] [ 276.972143] iscsi_if_recv_msg+0x1bf1/0x2660 [scsi_transport_iscsi] [ 276.972485] iscsi_if_rx+0x198/0x4b0 [scsi_transport_iscsi] [ 276.972808] netlink_unicast+0x4d5/0x7b0 [ 276.973201] netlink_sendmsg+0x78d/0xc30 [ 276.973544] sock_sendmsg+0xe5/0x120 [ 276.973864] ____sys_sendmsg+0x5fe/0x860 [ 276.974248] ___sys_ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: cpufreq: CPPC: Add u64 casts to avoid overflowing The fields of the _CPC object are unsigned 32-bits values. To avoid overflows while using _CPC's values, add 'u64' casts.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: Fix double increment of client_count in dma_chan_get() The first time dma_chan_get() is called for a channel the channel client_count is incorrectly incremented twice for public channels, first in balance_ref_count(), and again prior to returning. This results in an incorrect client count which will lead to the channel resources not being freed when they should be. A simple test of repeated module load and unload of async_tx on a Dell Power Edge R7425 also shows this resulting in a kref underflow warning. [ 124.329662] async_tx: api initialized (async) [ 129.000627] async_tx: api initialized (async) [ 130.047839] ------------[ cut here ]------------ [ 130.052472] refcount_t: underflow; use-after-free. [ 130.057279] WARNING: CPU: 3 PID: 19364 at lib/refcount.c:28 refcount_warn_saturate+0xba/0x110 [ 130.065811] Modules linked in: async_tx(-) rfkill intel_rapl_msr intel_rapl_common amd64_edac edac_mce_amd ipmi_ssif kvm_amd dcdbas kvm mgag200 drm_shmem_helper acpi_ipmi irqbypass drm_kms_helper ipmi_si syscopyarea sysfillrect rapl pcspkr ipmi_devintf sysimgblt fb_sys_fops k10temp i2c_piix4 ipmi_msghandler acpi_power_meter acpi_cpufreq vfat fat drm fuse xfs libcrc32c sd_mod t10_pi sg ahci crct10dif_pclmul libahci crc32_pclmul crc32c_intel ghash_clmulni_intel igb megaraid_sas i40e libata i2c_algo_bit ccp sp5100_tco dca dm_mirror dm_region_hash dm_log dm_mod [last unloaded: async_tx] [ 130.117361] CPU: 3 PID: 19364 Comm: modprobe Kdump: loaded Not tainted 5.14.0-185.el9.x86_64 #1 [ 130.126091] Hardware name: Dell Inc. PowerEdge R7425/02MJ3T, BIOS 1.18.0 01/17/2022 [ 130.133806] RIP: 0010:refcount_warn_saturate+0xba/0x110 [ 130.139041] Code: 01 01 e8 6d bd 55 00 0f 0b e9 72 9d 8a 00 80 3d 26 18 9c 01 00 75 85 48 c7 c7 f8 a3 03 9d c6 05 16 18 9c 01 01 e8 4a bd 55 00 <0f> 0b e9 4f 9d 8a 00 80 3d 01 18 9c 01 00 0f 85 5e ff ff ff 48 c7 [ 130.157807] RSP: 0018:ffffbf98898afe68 EFLAGS: 00010286 [ 130.163036] RAX: 0000000000000000 RBX: ffff9da06028e598 RCX: 0000000000000000 [ 130.170172] RDX: ffff9daf9de26480 RSI: ffff9daf9de198a0 RDI: ffff9daf9de198a0 [ 130.177316] RBP: ffff9da7cddf3970 R08: 0000000000000000 R09: 00000000ffff7fff [ 130.184459] R10: ffffbf98898afd00 R11: ffffffff9d9e8c28 R12: ffff9da7cddf1970 [ 130.191596] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 130.198739] FS: 00007f646435c740(0000) GS:ffff9daf9de00000(0000) knlGS:0000000000000000 [ 130.206832] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 130.212586] CR2: 00007f6463b214f0 CR3: 00000008ab98c000 CR4: 00000000003506e0 [ 130.219729] Call Trace: [ 130.222192] <TASK> [ 130.224305] dma_chan_put+0x10d/0x110 [ 130.227988] dmaengine_put+0x7a/0xa0 [ 130.231575] __do_sys_delete_module.constprop.0+0x178/0x280 [ 130.237157] ? syscall_trace_enter.constprop.0+0x145/0x1d0 [ 130.242652] do_syscall_64+0x5c/0x90 [ 130.246240] ? exc_page_fault+0x62/0x150 [ 130.250178] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 130.255243] RIP: 0033:0x7f6463a3f5ab [ 130.258830] Code: 73 01 c3 48 8b 0d 75 a8 1b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 45 a8 1b 00 f7 d8 64 89 01 48 [ 130.277591] RSP: 002b:00007fff22f972c8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ 130.285164] RAX: ffffffffffffffda RBX: 000055b6786edd40 RCX: 00007f6463a3f5ab [ 130.292303] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000055b6786edda8 [ 130.299443] RBP: 000055b6786edd40 R08: 0000000000000000 R09: 0000000000000000 [ 130.306584] R10: 00007f6463b9eac0 R11: 0000000000000206 R12: 000055b6786edda8 [ 130.313731] R13: 0000000000000000 R14: 000055b6786edda8 R15: 00007fff22f995f8 [ 130.320875] </TASK> [ 130.323081] ---[ end trace eff7156d56b5cf25 ]--- cat /sys/class/dma/dma0chan*/in_use would get the wrong result. 2 2 2 Test-by: Jie Hai <[email protected]>

In the Linux kernel, the following vulnerability has been resolved: phy: usb: sunplus: Fix potential null-ptr-deref in sp_usb_phy_probe() sp_usb_phy_probe() will call platform_get_resource_byname() that may fail and return NULL. devm_ioremap() will use usbphy->moon4_res_mem->start as input, which may causes null-ptr-deref. Check the ret value of platform_get_resource_byname() to avoid the null-ptr-deref.

In the Linux kernel, the following vulnerability has been resolved: VMCI: Use threaded irqs instead of tasklets The vmci_dispatch_dgs() tasklet function calls vmci_read_data() which uses wait_event() resulting in invalid sleep in an atomic context (and therefore potentially in a deadlock). Use threaded irqs to fix this issue and completely remove usage of tasklets. [ 20.264639] BUG: sleeping function called from invalid context at drivers/misc/vmw_vmci/vmci_guest.c:145 [ 20.264643] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 762, name: vmtoolsd [ 20.264645] preempt_count: 101, expected: 0 [ 20.264646] RCU nest depth: 0, expected: 0 [ 20.264647] 1 lock held by vmtoolsd/762: [ 20.264648] #0: ffff0000874ae440 (sk_lock-AF_VSOCK){+.+.}-{0:0}, at: vsock_connect+0x60/0x330 [vsock] [ 20.264658] Preemption disabled at: [ 20.264659] [<ffff80000151d7d8>] vmci_send_datagram+0x44/0xa0 [vmw_vmci] [ 20.264665] CPU: 0 PID: 762 Comm: vmtoolsd Not tainted 5.19.0-0.rc8.20220727git39c3c396f813.60.fc37.aarch64 #1 [ 20.264667] Hardware name: VMware, Inc. VBSA/VBSA, BIOS VEFI 12/31/2020 [ 20.264668] Call trace: [ 20.264669] dump_backtrace+0xc4/0x130 [ 20.264672] show_stack+0x24/0x80 [ 20.264673] dump_stack_lvl+0x88/0xb4 [ 20.264676] dump_stack+0x18/0x34 [ 20.264677] __might_resched+0x1a0/0x280 [ 20.264679] __might_sleep+0x58/0x90 [ 20.264681] vmci_read_data+0x74/0x120 [vmw_vmci] [ 20.264683] vmci_dispatch_dgs+0x64/0x204 [vmw_vmci] [ 20.264686] tasklet_action_common.constprop.0+0x13c/0x150 [ 20.264688] tasklet_action+0x40/0x50 [ 20.264689] __do_softirq+0x23c/0x6b4 [ 20.264690] __irq_exit_rcu+0x104/0x214 [ 20.264691] irq_exit_rcu+0x1c/0x50 [ 20.264693] el1_interrupt+0x38/0x6c [ 20.264695] el1h_64_irq_handler+0x18/0x24 [ 20.264696] el1h_64_irq+0x68/0x6c [ 20.264697] preempt_count_sub+0xa4/0xe0 [ 20.264698] _raw_spin_unlock_irqrestore+0x64/0xb0 [ 20.264701] vmci_send_datagram+0x7c/0xa0 [vmw_vmci] [ 20.264703] vmci_datagram_dispatch+0x84/0x100 [vmw_vmci] [ 20.264706] vmci_datagram_send+0x2c/0x40 [vmw_vmci] [ 20.264709] vmci_transport_send_control_pkt+0xb8/0x120 [vmw_vsock_vmci_transport] [ 20.264711] vmci_transport_connect+0x40/0x7c [vmw_vsock_vmci_transport] [ 20.264713] vsock_connect+0x278/0x330 [vsock] [ 20.264715] __sys_connect_file+0x8c/0xc0 [ 20.264718] __sys_connect+0x84/0xb4 [ 20.264720] __arm64_sys_connect+0x2c/0x3c [ 20.264721] invoke_syscall+0x78/0x100 [ 20.264723] el0_svc_common.constprop.0+0x68/0x124 [ 20.264724] do_el0_svc+0x38/0x4c [ 20.264725] el0_svc+0x60/0x180 [ 20.264726] el0t_64_sync_handler+0x11c/0x150 [ 20.264728] el0t_64_sync+0x190/0x194

In the Linux kernel, the following vulnerability has been resolved: nvmem: core: fix cleanup after dev_set_name() If dev_set_name() fails, we leak nvmem->wp_gpio as the cleanup does not put this. While a minimal fix for this would be to add the gpiod_put() call, we can do better if we split device_register(), and use the tested nvmem_release() cleanup code by initialising the device early, and putting the device. This results in a slightly larger fix, but results in clear code. Note: this patch depends on "nvmem: core: initialise nvmem->id early" and "nvmem: core: remove nvmem_config wp_gpio". [Srini: Fixed subject line and error code handing with wp_gpio while applying.]

In the Linux kernel, the following vulnerability has been resolved: cgroup/cpuset: Fix wrong check in update_parent_subparts_cpumask() It was found that the check to see if a partition could use up all the cpus from the parent cpuset in update_parent_subparts_cpumask() was incorrect. As a result, it is possible to leave parent with no effective cpu left even if there are tasks in the parent cpuset. This can lead to system panic as reported in [1]. Fix this probem by updating the check to fail the enabling the partition if parent's effective_cpus is a subset of the child's cpus_allowed. Also record the error code when an error happens in update_prstate() and add a test case where parent partition and child have the same cpu list and parent has task. Enabling partition in the child will fail in this case. [1] https://www.spinics.net/lists/cgroups/msg36254.html

In the Linux kernel, the following vulnerability has been resolved: device property: fix of node refcount leak in fwnode_graph_get_next_endpoint() The 'parent' returned by fwnode_graph_get_port_parent() with refcount incremented when 'prev' is not NULL, it needs be put when finish using it. Because the parent is const, introduce a new variable to store the returned fwnode, then put it before returning from fwnode_graph_get_next_endpoint().

In the Linux kernel, the following vulnerability has been resolved: erofs/zmap.c: Fix incorrect offset calculation Effective offset to add to length was being incorrectly calculated, which resulted in iomap->length being set to 0, triggering a WARN_ON in iomap_iter_done(). Fix that, and describe it in comments. This was reported as a crash by syzbot under an issue about a warning encountered in iomap_iter_done(), but unrelated to erofs. C reproducer: https://syzkaller.appspot.com/text?tag=ReproC&x=1037a6b2880000 Kernel config: https://syzkaller.appspot.com/text?tag=KernelConfig&x=e2021a61197ebe02 Dashboard link: https://syzkaller.appspot.com/bug?extid=a8e049cd3abd342936b6

In the Linux kernel, the following vulnerability has been resolved: arm64: dts: imx8mm-verdin: Do not power down eth-phy Currently if suspending using either freeze or memory state, the fec driver tries to power down the phy which leads to crash of the kernel and non-responsible kernel with the following call trace: [ 24.839889 ] Call trace: [ 24.839892 ] phy_error+0x18/0x60 [ 24.839898 ] kszphy_handle_interrupt+0x6c/0x80 [ 24.839903 ] phy_interrupt+0x20/0x2c [ 24.839909 ] irq_thread_fn+0x30/0xa0 [ 24.839919 ] irq_thread+0x178/0x2c0 [ 24.839925 ] kthread+0x154/0x160 [ 24.839932 ] ret_from_fork+0x10/0x20 Since there is currently no functionality in the phy subsystem to power down phys let's just disable the feature of powering-down the ethernet phy.

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: ipc4-mtrace: prevent underflow in sof_ipc4_priority_mask_dfs_write() The "id" comes from the user. Change the type to unsigned to prevent an array underflow.

In the Linux kernel, the following vulnerability has been resolved: ice: Fix deinitializing VF in error path If ice_ena_vfs() fails after calling ice_create_vf_entries(), it frees all VFs without removing them from snapshot PF-VF mailbox list, leading to list corruption. Reproducer: devlink dev eswitch set $PF1_PCI mode switchdev ip l s $PF1 up ip l s $PF1 promisc on sleep 1 echo 1 > /sys/class/net/$PF1/device/sriov_numvfs sleep 1 echo 1 > /sys/class/net/$PF1/device/sriov_numvfs Trace (minimized): list_add corruption. next->prev should be prev (ffff8882e241c6f0), but was 0000000000000000. (next=ffff888455da1330). kernel BUG at lib/list_debug.c:29! RIP: 0010:__list_add_valid_or_report+0xa6/0x100 ice_mbx_init_vf_info+0xa7/0x180 [ice] ice_initialize_vf_entry+0x1fa/0x250 [ice] ice_sriov_configure+0x8d7/0x1520 [ice] ? __percpu_ref_switch_mode+0x1b1/0x5d0 ? __pfx_ice_sriov_configure+0x10/0x10 [ice] Sometimes a KASAN report can be seen instead with a similar stack trace: BUG: KASAN: use-after-free in __list_add_valid_or_report+0xf1/0x100 VFs are added to this list in ice_mbx_init_vf_info(), but only removed in ice_free_vfs(). Move the removing to ice_free_vf_entries(), which is also being called in other places where VFs are being removed (including ice_free_vfs() itself).

In the Linux kernel, the following vulnerability has been resolved: fpga: m10bmc-sec: Fix probe rollback Handle probe error rollbacks properly to avoid leaks.

In the Linux kernel, the following vulnerability has been resolved: netlink: prevent potential spectre v1 gadgets Most netlink attributes are parsed and validated from __nla_validate_parse() or validate_nla() u16 type = nla_type(nla); if (type == 0 || type > maxtype) { /* error or continue */ } @type is then used as an array index and can be used as a Spectre v1 gadget. array_index_nospec() can be used to prevent leaking content of kernel memory to malicious users. This should take care of vast majority of netlink uses, but an audit is needed to take care of others where validation is not yet centralized in core netlink functions.

In the Linux kernel, the following vulnerability has been resolved: tracing: Make sure trace_printk() can output as soon as it can be used Currently trace_printk() can be used as soon as early_trace_init() is called from start_kernel(). But if a crash happens, and "ftrace_dump_on_oops" is set on the kernel command line, all you get will be: [ 0.456075] <idle>-0 0dN.2. 347519us : Unknown type 6 [ 0.456075] <idle>-0 0dN.2. 353141us : Unknown type 6 [ 0.456075] <idle>-0 0dN.2. 358684us : Unknown type 6 This is because the trace_printk() event (type 6) hasn't been registered yet. That gets done via an early_initcall(), which may be early, but not early enough. Instead of registering the trace_printk() event (and other ftrace events, which are not trace events) via an early_initcall(), have them registered at the same time that trace_printk() can be used. This way, if there is a crash before early_initcall(), then the trace_printk()s will actually be useful.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Add sync after creating vram bo There will be data corruption on vram allocated by svm if the initialization is not complete and application is writting on the memory. Adding sync to wait for the initialization completion is to resolve this issue.

A flaw was found in gnuplot. The GetAnnotateString() function may lead to a segmentation fault and cause a system crash.

In the Linux kernel, the following vulnerability has been resolved: dm-integrity: Avoid divide by zero in table status in Inline mode In Inline mode, the journal is unused, and journal_sectors is zero. Calculating the journal watermark requires dividing by journal_sectors, which should be done only if the journal is configured. Otherwise, a simple table query (dmsetup table) can cause OOPS. This bug did not show on some systems, perhaps only due to compiler optimization. On my 32-bit testing machine, this reliably crashes with the following: : Oops: divide error: 0000 [#1] PREEMPT SMP : CPU: 0 UID: 0 PID: 2450 Comm: dmsetup Not tainted 6.14.0-rc2+ #959 : EIP: dm_integrity_status+0x2f8/0xab0 [dm_integrity] ...

In the Linux kernel, the following vulnerability has been resolved: net: fix UaF in netns ops registration error path If net_assign_generic() fails, the current error path in ops_init() tries to clear the gen pointer slot. Anyway, in such error path, the gen pointer itself has not been modified yet, and the existing and accessed one is smaller than the accessed index, causing an out-of-bounds error: BUG: KASAN: slab-out-of-bounds in ops_init+0x2de/0x320 Write of size 8 at addr ffff888109124978 by task modprobe/1018 CPU: 2 PID: 1018 Comm: modprobe Not tainted 6.2.0-rc2.mptcp_ae5ac65fbed5+ #1641 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.1-2.fc37 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x6a/0x9f print_address_description.constprop.0+0x86/0x2b5 print_report+0x11b/0x1fb kasan_report+0x87/0xc0 ops_init+0x2de/0x320 register_pernet_operations+0x2e4/0x750 register_pernet_subsys+0x24/0x40 tcf_register_action+0x9f/0x560 do_one_initcall+0xf9/0x570 do_init_module+0x190/0x650 load_module+0x1fa5/0x23c0 __do_sys_finit_module+0x10d/0x1b0 do_syscall_64+0x58/0x80 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f42518f778d Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d cb 56 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007fff96869688 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 00005568ef7f7c90 RCX: 00007f42518f778d RDX: 0000000000000000 RSI: 00005568ef41d796 RDI: 0000000000000003 RBP: 00005568ef41d796 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000000 R13: 00005568ef7f7d30 R14: 0000000000040000 R15: 0000000000000000 </TASK> This change addresses the issue by skipping the gen pointer de-reference in the mentioned error-path. Found by code inspection and verified with explicit error injection on a kasan-enabled kernel.

In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_taprio: fix possible use-after-free syzbot reported a nasty crash [1] in net_tx_action() which made little sense until we got a repro. This repro installs a taprio qdisc, but providing an invalid TCA_RATE attribute. qdisc_create() has to destroy the just initialized taprio qdisc, and taprio_destroy() is called. However, the hrtimer used by taprio had already fired, therefore advance_sched() called __netif_schedule(). Then net_tx_action was trying to use a destroyed qdisc. We can not undo the __netif_schedule(), so we must wait until one cpu serviced the qdisc before we can proceed. Many thanks to Alexander Potapenko for his help. [1] BUG: KMSAN: uninit-value in queued_spin_trylock include/asm-generic/qspinlock.h:94 [inline] BUG: KMSAN: uninit-value in do_raw_spin_trylock include/linux/spinlock.h:191 [inline] BUG: KMSAN: uninit-value in __raw_spin_trylock include/linux/spinlock_api_smp.h:89 [inline] BUG: KMSAN: uninit-value in _raw_spin_trylock+0x92/0xa0 kernel/locking/spinlock.c:138 queued_spin_trylock include/asm-generic/qspinlock.h:94 [inline] do_raw_spin_trylock include/linux/spinlock.h:191 [inline] __raw_spin_trylock include/linux/spinlock_api_smp.h:89 [inline] _raw_spin_trylock+0x92/0xa0 kernel/locking/spinlock.c:138 spin_trylock include/linux/spinlock.h:359 [inline] qdisc_run_begin include/net/sch_generic.h:187 [inline] qdisc_run+0xee/0x540 include/net/pkt_sched.h:125 net_tx_action+0x77c/0x9a0 net/core/dev.c:5086 __do_softirq+0x1cc/0x7fb kernel/softirq.c:571 run_ksoftirqd+0x2c/0x50 kernel/softirq.c:934 smpboot_thread_fn+0x554/0x9f0 kernel/smpboot.c:164 kthread+0x31b/0x430 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 Uninit was created at: slab_post_alloc_hook mm/slab.h:732 [inline] slab_alloc_node mm/slub.c:3258 [inline] __kmalloc_node_track_caller+0x814/0x1250 mm/slub.c:4970 kmalloc_reserve net/core/skbuff.c:358 [inline] __alloc_skb+0x346/0xcf0 net/core/skbuff.c:430 alloc_skb include/linux/skbuff.h:1257 [inline] nlmsg_new include/net/netlink.h:953 [inline] netlink_ack+0x5f3/0x12b0 net/netlink/af_netlink.c:2436 netlink_rcv_skb+0x55d/0x6c0 net/netlink/af_netlink.c:2507 rtnetlink_rcv+0x30/0x40 net/core/rtnetlink.c:6108 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0xf3b/0x1270 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x1288/0x1440 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] ____sys_sendmsg+0xabc/0xe90 net/socket.c:2482 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2536 __sys_sendmsg net/socket.c:2565 [inline] __do_sys_sendmsg net/socket.c:2574 [inline] __se_sys_sendmsg net/socket.c:2572 [inline] __x64_sys_sendmsg+0x367/0x540 net/socket.c:2572 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd CPU: 0 PID: 13 Comm: ksoftirqd/0 Not tainted 6.0.0-rc2-syzkaller-47461-gac3859c02d7f #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/22/2022

In the Linux kernel, the following vulnerability has been resolved: net: nfc: Fix use-after-free in local_cleanup() Fix a use-after-free that occurs in kfree_skb() called from local_cleanup(). This could happen when killing nfc daemon (e.g. neard) after detaching an nfc device. When detaching an nfc device, local_cleanup() called from nfc_llcp_unregister_device() frees local->rx_pending and decreases local->ref by kref_put() in nfc_llcp_local_put(). In the terminating process, nfc daemon releases all sockets and it leads to decreasing local->ref. After the last release of local->ref, local_cleanup() called from local_release() frees local->rx_pending again, which leads to the bug. Setting local->rx_pending to NULL in local_cleanup() could prevent use-after-free when local_cleanup() is called twice. Found by a modified version of syzkaller. BUG: KASAN: use-after-free in kfree_skb() Call Trace: dump_stack_lvl (lib/dump_stack.c:106) print_address_description.constprop.0.cold (mm/kasan/report.c:306) kasan_check_range (mm/kasan/generic.c:189) kfree_skb (net/core/skbuff.c:955) local_cleanup (net/nfc/llcp_core.c:159) nfc_llcp_local_put.part.0 (net/nfc/llcp_core.c:172) nfc_llcp_local_put (net/nfc/llcp_core.c:181) llcp_sock_destruct (net/nfc/llcp_sock.c:959) __sk_destruct (net/core/sock.c:2133) sk_destruct (net/core/sock.c:2181) __sk_free (net/core/sock.c:2192) sk_free (net/core/sock.c:2203) llcp_sock_release (net/nfc/llcp_sock.c:646) __sock_release (net/socket.c:650) sock_close (net/socket.c:1365) __fput (fs/file_table.c:306) task_work_run (kernel/task_work.c:179) ptrace_notify (kernel/signal.c:2354) syscall_exit_to_user_mode_prepare (kernel/entry/common.c:278) syscall_exit_to_user_mode (kernel/entry/common.c:296) do_syscall_64 (arch/x86/entry/common.c:86) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:106) Allocated by task 4719: kasan_save_stack (mm/kasan/common.c:45) __kasan_slab_alloc (mm/kasan/common.c:325) slab_post_alloc_hook (mm/slab.h:766) kmem_cache_alloc_node (mm/slub.c:3497) __alloc_skb (net/core/skbuff.c:552) pn533_recv_response (drivers/nfc/pn533/usb.c:65) __usb_hcd_giveback_urb (drivers/usb/core/hcd.c:1671) usb_giveback_urb_bh (drivers/usb/core/hcd.c:1704) tasklet_action_common.isra.0 (kernel/softirq.c:797) __do_softirq (kernel/softirq.c:571) Freed by task 1901: kasan_save_stack (mm/kasan/common.c:45) kasan_set_track (mm/kasan/common.c:52) kasan_save_free_info (mm/kasan/genericdd.c:518) __kasan_slab_free (mm/kasan/common.c:236) kmem_cache_free (mm/slub.c:3809) kfree_skbmem (net/core/skbuff.c:874) kfree_skb (net/core/skbuff.c:931) local_cleanup (net/nfc/llcp_core.c:159) nfc_llcp_unregister_device (net/nfc/llcp_core.c:1617) nfc_unregister_device (net/nfc/core.c:1179) pn53x_unregister_nfc (drivers/nfc/pn533/pn533.c:2846) pn533_usb_disconnect (drivers/nfc/pn533/usb.c:579) usb_unbind_interface (drivers/usb/core/driver.c:458) device_release_driver_internal (drivers/base/dd.c:1279) bus_remove_device (drivers/base/bus.c:529) device_del (drivers/base/core.c:3665) usb_disable_device (drivers/usb/core/message.c:1420) usb_disconnect (drivers/usb/core.c:2261) hub_event (drivers/usb/core/hub.c:5833) process_one_work (arch/x86/include/asm/jump_label.h:27 include/linux/jump_label.h:212 include/trace/events/workqueue.h:108 kernel/workqueue.c:2281) worker_thread (include/linux/list.h:282 kernel/workqueue.c:2423) kthread (kernel/kthread.c:319) ret_from_fork (arch/x86/entry/entry_64.S:301)

This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

In the Linux kernel, the following vulnerability has been resolved: bpf: Skip invalid kfunc call in backtrack_insn The verifier skips invalid kfunc call in check_kfunc_call(), which would be captured in fixup_kfunc_call() if such insn is not eliminated by dead code elimination. However, this can lead to the following warning in backtrack_insn(), also see [1]: ------------[ cut here ]------------ verifier backtracking bug WARNING: CPU: 6 PID: 8646 at kernel/bpf/verifier.c:2756 backtrack_insn kernel/bpf/verifier.c:2756 __mark_chain_precision kernel/bpf/verifier.c:3065 mark_chain_precision kernel/bpf/verifier.c:3165 adjust_reg_min_max_vals kernel/bpf/verifier.c:10715 check_alu_op kernel/bpf/verifier.c:10928 do_check kernel/bpf/verifier.c:13821 [inline] do_check_common kernel/bpf/verifier.c:16289 [...] So make backtracking conservative with this by returning ENOTSUPP. [1] https://lore.kernel.org/bpf/CACkBjsaXNceR8ZjkLG=dT3P=4A8SBsg0Z5h5PWLryF5=ghKq=g@mail.gmail.com/

In the Linux kernel, the following vulnerability has been resolved: Squashfs: fix handling and sanity checking of xattr_ids count A Sysbot [1] corrupted filesystem exposes two flaws in the handling and sanity checking of the xattr_ids count in the filesystem. Both of these flaws cause computation overflow due to incorrect typing. In the corrupted filesystem the xattr_ids value is 4294967071, which stored in a signed variable becomes the negative number -225. Flaw 1 (64-bit systems only): The signed integer xattr_ids variable causes sign extension. This causes variable overflow in the SQUASHFS_XATTR_*(A) macros. The variable is first multiplied by sizeof(struct squashfs_xattr_id) where the type of the sizeof operator is "unsigned long". On a 64-bit system this is 64-bits in size, and causes the negative number to be sign extended and widened to 64-bits and then become unsigned. This produces the very large number 18446744073709548016 or 2^64 - 3600. This number when rounded up by SQUASHFS_METADATA_SIZE - 1 (8191 bytes) and divided by SQUASHFS_METADATA_SIZE overflows and produces a length of 0 (stored in len). Flaw 2 (32-bit systems only): On a 32-bit system the integer variable is not widened by the unsigned long type of the sizeof operator (32-bits), and the signedness of the variable has no effect due it always being treated as unsigned. The above corrupted xattr_ids value of 4294967071, when multiplied overflows and produces the number 4294963696 or 2^32 - 3400. This number when rounded up by SQUASHFS_METADATA_SIZE - 1 (8191 bytes) and divided by SQUASHFS_METADATA_SIZE overflows again and produces a length of 0. The effect of the 0 length computation: In conjunction with the corrupted xattr_ids field, the filesystem also has a corrupted xattr_table_start value, where it matches the end of filesystem value of 850. This causes the following sanity check code to fail because the incorrectly computed len of 0 matches the incorrect size of the table reported by the superblock (0 bytes). len = SQUASHFS_XATTR_BLOCK_BYTES(*xattr_ids); indexes = SQUASHFS_XATTR_BLOCKS(*xattr_ids); /* * The computed size of the index table (len bytes) should exactly * match the table start and end points */ start = table_start + sizeof(*id_table); end = msblk->bytes_used; if (len != (end - start)) return ERR_PTR(-EINVAL); Changing the xattr_ids variable to be "usigned int" fixes the flaw on a 64-bit system. This relies on the fact the computation is widened by the unsigned long type of the sizeof operator. Casting the variable to u64 in the above macro fixes this flaw on a 32-bit system. It also means 64-bit systems do not implicitly rely on the type of the sizeof operator to widen the computation. [1] https://lore.kernel.org/lkml/[email protected]/

In the Linux kernel, the following vulnerability has been resolved: can: isotp: split tx timer into transmission and timeout The timer for the transmission of isotp PDUs formerly had two functions: 1. send two consecutive frames with a given time gap 2. monitor the timeouts for flow control frames and the echo frames This led to larger txstate checks and potentially to a problem discovered by syzbot which enabled the panic_on_warn feature while testing. The former 'txtimer' function is split into 'txfrtimer' and 'txtimer' to handle the two above functionalities with separate timer callbacks. The two simplified timers now run in one-shot mode and make the state transitions (especially with isotp_rcv_echo) better understandable.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: Don't attempt to resume the ports before they exist This will fix null pointer dereference that was caused by the driver attempting to resume ports that were not yet registered.

In the Linux kernel, the following vulnerability has been resolved: vc_screen: move load of struct vc_data pointer in vcs_read() to avoid UAF After a call to console_unlock() in vcs_read() the vc_data struct can be freed by vc_deallocate(). Because of that, the struct vc_data pointer load must be done at the top of while loop in vcs_read() to avoid a UAF when vcs_size() is called. Syzkaller reported a UAF in vcs_size(). BUG: KASAN: use-after-free in vcs_size (drivers/tty/vt/vc_screen.c:215) Read of size 4 at addr ffff8881137479a8 by task 4a005ed81e27e65/1537 CPU: 0 PID: 1537 Comm: 4a005ed81e27e65 Not tainted 6.2.0-rc5 #1 Hardware name: Red Hat KVM, BIOS 1.15.0-2.module Call Trace: <TASK> __asan_report_load4_noabort (mm/kasan/report_generic.c:350) vcs_size (drivers/tty/vt/vc_screen.c:215) vcs_read (drivers/tty/vt/vc_screen.c:415) vfs_read (fs/read_write.c:468 fs/read_write.c:450) ... </TASK> Allocated by task 1191: ... kmalloc_trace (mm/slab_common.c:1069) vc_allocate (./include/linux/slab.h:580 ./include/linux/slab.h:720 drivers/tty/vt/vt.c:1128 drivers/tty/vt/vt.c:1108) con_install (drivers/tty/vt/vt.c:3383) tty_init_dev (drivers/tty/tty_io.c:1301 drivers/tty/tty_io.c:1413 drivers/tty/tty_io.c:1390) tty_open (drivers/tty/tty_io.c:2080 drivers/tty/tty_io.c:2126) chrdev_open (fs/char_dev.c:415) do_dentry_open (fs/open.c:883) vfs_open (fs/open.c:1014) ... Freed by task 1548: ... kfree (mm/slab_common.c:1021) vc_port_destruct (drivers/tty/vt/vt.c:1094) tty_port_destructor (drivers/tty/tty_port.c:296) tty_port_put (drivers/tty/tty_port.c:312) vt_disallocate_all (drivers/tty/vt/vt_ioctl.c:662 (discriminator 2)) vt_ioctl (drivers/tty/vt/vt_ioctl.c:903) tty_ioctl (drivers/tty/tty_io.c:2776) ... The buggy address belongs to the object at ffff888113747800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 424 bytes inside of 1024-byte region [ffff888113747800, ffff888113747c00) The buggy address belongs to the physical page: page:00000000b3fe6c7c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x113740 head:00000000b3fe6c7c order:3 compound_mapcount:0 subpages_mapcount:0 compound_pincount:0 anon flags: 0x17ffffc0010200(slab|head|node=0|zone=2|lastcpupid=0x1fffff) raw: 0017ffffc0010200 ffff888100042dc0 0000000000000000 dead000000000001 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888113747880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888113747900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb > ffff888113747980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888113747a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888113747a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Disabling lock debugging due to kernel taint

In the Linux kernel, the following vulnerability has been resolved: riscv: kprobe: Fixup kernel panic when probing an illegal position The kernel would panic when probed for an illegal position. eg: (CONFIG_RISCV_ISA_C=n) echo 'p:hello kernel_clone+0x16 a0=%a0' >> kprobe_events echo 1 > events/kprobes/hello/enable cat trace Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: __do_sys_newfstatat+0xb8/0xb8 CPU: 0 PID: 111 Comm: sh Not tainted 6.2.0-rc1-00027-g2d398fe49a4d #490 Hardware name: riscv-virtio,qemu (DT) Call Trace: [<ffffffff80007268>] dump_backtrace+0x38/0x48 [<ffffffff80c5e83c>] show_stack+0x50/0x68 [<ffffffff80c6da28>] dump_stack_lvl+0x60/0x84 [<ffffffff80c6da6c>] dump_stack+0x20/0x30 [<ffffffff80c5ecf4>] panic+0x160/0x374 [<ffffffff80c6db94>] generic_handle_arch_irq+0x0/0xa8 [<ffffffff802deeb0>] sys_newstat+0x0/0x30 [<ffffffff800158c0>] sys_clone+0x20/0x30 [<ffffffff800039e8>] ret_from_syscall+0x0/0x4 ---[ end Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: __do_sys_newfstatat+0xb8/0xb8 ]--- That is because the kprobe's ebreak instruction broke the kernel's original code. The user should guarantee the correction of the probe position, but it couldn't make the kernel panic. This patch adds arch_check_kprobe in arch_prepare_kprobe to prevent an illegal position (Such as the middle of an instruction).

In the Linux kernel, the following vulnerability has been resolved: block: ublk: extending queue_size to fix overflow When validating drafted SPDK ublk target, in a case that assigning large queue depth to multiqueue ublk device, ublk target would run into a weird incorrect state. During rounds of review and debug, An overflow bug was found in ublk driver. In ublk_cmd.h, UBLK_MAX_QUEUE_DEPTH is 4096 which means each ublk queue depth can be set as large as 4096. But when setting qd for a ublk device, sizeof(struct ublk_queue) + depth * sizeof(struct ublk_io) will be larger than 65535 if qd is larger than 2728. Then queue_size is overflowed, and ublk_get_queue() references a wrong pointer position. The wrong content of ublk_queue elements will lead to out-of-bounds memory access. Extend queue_size in ublk_device as "unsigned int".

In the Linux kernel, the following vulnerability has been resolved: drm/i915: Fix request ref counting during error capture & debugfs dump When GuC support was added to error capture, the reference counting around the request object was broken. Fix it up. The context based search manages the spinlocking around the search internally. So it needs to grab the reference count internally as well. The execlist only request based search relies on external locking, so it needs an external reference count but within the spinlock not outside it. The only other caller of the context based search is the code for dumping engine state to debugfs. That code wasn't previously getting an explicit reference at all as it does everything while holding the execlist specific spinlock. So, that needs updaing as well as that spinlock doesn't help when using GuC submission. Rather than trying to conditionally get/put depending on submission model, just change it to always do the get/put. v2: Explicitly document adding an extra blank line in some dense code (Andy Shevchenko). Fix multiple potential null pointer derefs in case of no request found (some spotted by Tvrtko, but there was more!). Also fix a leaked request in case of !started and another in __guc_reset_context now that intel_context_find_active_request is actually reference counting the returned request. v3: Add a _get suffix to intel_context_find_active_request now that it grabs a reference (Daniele). v4: Split the intel_guc_find_hung_context change to a separate patch and rename intel_context_find_active_request_get to intel_context_get_active_request (Tvrtko). v5: s/locking/reference counting/ in commit message (Tvrtko) (cherry picked from commit 3700e353781e27f1bc7222f51f2cc36cbeb9b4ec)

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Check for any of tcp_bpf_prots when cloning a listener A listening socket linked to a sockmap has its sk_prot overridden. It points to one of the struct proto variants in tcp_bpf_prots. The variant depends on the socket's family and which sockmap programs are attached. A child socket cloned from a TCP listener initially inherits their sk_prot. But before cloning is finished, we restore the child's proto to the listener's original non-tcp_bpf_prots one. This happens in tcp_create_openreq_child -> tcp_bpf_clone. Today, in tcp_bpf_clone we detect if the child's proto should be restored by checking only for the TCP_BPF_BASE proto variant. This is not correct. The sk_prot of listening socket linked to a sockmap can point to to any variant in tcp_bpf_prots. If the listeners sk_prot happens to be not the TCP_BPF_BASE variant, then the child socket unintentionally is left if the inherited sk_prot by tcp_bpf_clone. This leads to issues like infinite recursion on close [1], because the child state is otherwise not set up for use with tcp_bpf_prot operations. Adjust the check in tcp_bpf_clone to detect all of tcp_bpf_prots variants. Note that it wouldn't be sufficient to check the socket state when overriding the sk_prot in tcp_bpf_update_proto in order to always use the TCP_BPF_BASE variant for listening sockets. Since commit b8b8315e39ff ("bpf, sockmap: Remove unhash handler for BPF sockmap usage") it is possible for a socket to transition to TCP_LISTEN state while already linked to a sockmap, e.g. connect() -> insert into map -> connect(AF_UNSPEC) -> listen(). [1]: https://lore.kernel.org/all/[email protected]/

In the Linux kernel, the following vulnerability has been resolved: block, bfq: fix uaf for bfqq in bic_set_bfqq() After commit 64dc8c732f5c ("block, bfq: fix possible uaf for 'bfqq->bic'"), bic->bfqq will be accessed in bic_set_bfqq(), however, in some context bic->bfqq will be freed, and bic_set_bfqq() is called with the freed bic->bfqq. Fix the problem by always freeing bfqq after bic_set_bfqq().

In the Linux kernel, the following vulnerability has been resolved: ipv4: prevent potential spectre v1 gadget in ip_metrics_convert() if (!type) continue; if (type > RTAX_MAX) return -EINVAL; ... metrics[type - 1] = val; @type being used as an array index, we need to prevent cpu speculation or risk leaking kernel memory content.

This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

In the Linux kernel, the following vulnerability has been resolved: net: fec: Use page_pool_put_full_page when freeing rx buffers The page_pool_release_page was used when freeing rx buffers, and this function just unmaps the page (if mapped) and does not recycle the page. So after hundreds of down/up the eth0, the system will out of memory. For more details, please refer to the following reproduce steps and bug logs. To solve this issue and refer to the doc of page pool, the page_pool_put_full_page should be used to replace page_pool_release_page. Because this API will try to recycle the page if the page refcnt equal to 1. After testing 20000 times, the issue can not be reproduced anymore (about testing 391 times the issue will occur on i.MX8MN-EVK before). Reproduce steps: Create the test script and run the script. The script content is as follows: LOOPS=20000 i=1 while [ $i -le $LOOPS ] do echo "TINFO:ENET $curface up and down test $i times" org_macaddr=$(cat /sys/class/net/eth0/address) ifconfig eth0 down ifconfig eth0 hw ether $org_macaddr up i=$(expr $i + 1) done sleep 5 if cat /sys/class/net/eth0/operstate | grep 'up';then echo "TEST PASS" else echo "TEST FAIL" fi Bug detail logs: TINFO:ENET up and down test 391 times [ 850.471205] Qualcomm Atheros AR8031/AR8033 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL) [ 853.535318] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 853.541694] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 870.590531] page_pool_release_retry() stalled pool shutdown 199 inflight 60 sec [ 931.006557] page_pool_release_retry() stalled pool shutdown 199 inflight 120 sec TINFO:ENET up and down test 392 times [ 991.426544] page_pool_release_retry() stalled pool shutdown 192 inflight 181 sec [ 1051.838531] page_pool_release_retry() stalled pool shutdown 170 inflight 241 sec [ 1093.751217] Qualcomm Atheros AR8031/AR8033 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL) [ 1096.446520] page_pool_release_retry() stalled pool shutdown 308 inflight 60 sec [ 1096.831245] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 1096.839092] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 1112.254526] page_pool_release_retry() stalled pool shutdown 103 inflight 302 sec [ 1156.862533] page_pool_release_retry() stalled pool shutdown 308 inflight 120 sec [ 1172.674516] page_pool_release_retry() stalled pool shutdown 103 inflight 362 sec [ 1217.278532] page_pool_release_retry() stalled pool shutdown 308 inflight 181 sec TINFO:ENET up and down test 393 times [ 1233.086535] page_pool_release_retry() stalled pool shutdown 103 inflight 422 sec [ 1277.698513] page_pool_release_retry() stalled pool shutdown 308 inflight 241 sec [ 1293.502525] page_pool_release_retry() stalled pool shutdown 86 inflight 483 sec [ 1338.110518] page_pool_release_retry() stalled pool shutdown 308 inflight 302 sec [ 1353.918540] page_pool_release_retry() stalled pool shutdown 32 inflight 543 sec [ 1361.179205] Qualcomm Atheros AR8031/AR8033 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL) [ 1364.255298] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 1364.263189] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 1371.998532] page_pool_release_retry() stalled pool shutdown 310 inflight 60 sec [ 1398.530542] page_pool_release_retry() stalled pool shutdown 308 inflight 362 sec [ 1414.334539] page_pool_release_retry() stalled pool shutdown 16 inflight 604 sec [ 1432.414520] page_pool_release_retry() stalled pool shutdown 310 inflight 120 sec [ 1458.942523] page_pool_release_retry() stalled pool shutdown 308 inflight 422 sec [ 1474.750521] page_pool_release_retry() stalled pool shutdown 16 inflight 664 sec TINFO:ENET up and down test 394 times [ 1492.8305 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ipv4: prevent potential spectre v1 gadget in fib_metrics_match() if (!type) continue; if (type > RTAX_MAX) return false; ... fi_val = fi->fib_metrics->metrics[type - 1]; @type being used as an array index, we need to prevent cpu speculation or risk leaking kernel memory content.

In the Linux kernel, the following vulnerability has been resolved: acpi: Fix suspend with Xen PV Commit f1e525009493 ("x86/boot: Skip realmode init code when running as Xen PV guest") missed one code path accessing real_mode_header, leading to dereferencing NULL when suspending the system under Xen: [ 348.284004] PM: suspend entry (deep) [ 348.289532] Filesystems sync: 0.005 seconds [ 348.291545] Freezing user space processes ... (elapsed 0.000 seconds) done. [ 348.292457] OOM killer disabled. [ 348.292462] Freezing remaining freezable tasks ... (elapsed 0.104 seconds) done. [ 348.396612] printk: Suspending console(s) (use no_console_suspend to debug) [ 348.749228] PM: suspend devices took 0.352 seconds [ 348.769713] ACPI: EC: interrupt blocked [ 348.816077] BUG: kernel NULL pointer dereference, address: 000000000000001c [ 348.816080] #PF: supervisor read access in kernel mode [ 348.816081] #PF: error_code(0x0000) - not-present page [ 348.816083] PGD 0 P4D 0 [ 348.816086] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 348.816089] CPU: 0 PID: 6764 Comm: systemd-sleep Not tainted 6.1.3-1.fc32.qubes.x86_64 #1 [ 348.816092] Hardware name: Star Labs StarBook/StarBook, BIOS 8.01 07/03/2022 [ 348.816093] RIP: e030:acpi_get_wakeup_address+0xc/0x20 Fix that by adding an optional acpi callback allowing to skip setting the wakeup address, as in the Xen PV case this will be handled by the hypervisor anyway.