CVE Feed

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Tear down inactive DP tunnels when the domain is stopped tb_stop() only tears down DMA tunnels so a DP tunnel that is still waiting for dprx_work to complete keeps that work queued while the routers are removed and the control channel is stopped. The work only stops once the DPRX timeout has passed and because it requeues itself until then the flush_workqueue() in tb_domain_remove() won't wait for its final run. The callback then runs against a domain that is already torn down. A reference to that domain is kept so the completion waiting for that domain to disappear in unbind will block until the timeout is eventually reached. Tear down DP tunnels that are not active yet as well which also cancels that work. Tunnels for displays that are already alive are untouched and keep working.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: balance the parent hold in hci_bind_bis() hci_conn_link() takes a lifetime reference to its parent with hci_conn_get(), but only takes an operational hold on the child. hci_conn_unlink() later balances both a hold and a reference on the parent. The SCO and CIS paths pass a parent acquired from a connect helper, so it already has a hold. For an additional BIS, hci_bind_bis() obtains the parent from hci_conn_hash_lookup_big(), which returns a bare pointer. Unlinking the child then drops the parent's existing hold and can schedule it for disconnection while its socket is still using it. Take a hold on the parent before linking it and drop that hold if linking fails. A successful link transfers the hold to hci_conn_unlink().

In the Linux kernel, the following vulnerability has been resolved: smb: client: close completed creates on compound wait errors compound_send_recv() waits for responses in order. If a later wait is interrupted, or if a later MID fails during response synchronization, an earlier CREATE may already have opened a remote handle. The earlier mid is then released without invoking handle_cancelled_mid(), leaving the remote handle open because no FID was copied to the caller. Mark completed earlier mids as cancelled when a compound wait or MID synchronization aborts. Keep their response buffers attached while the MIDs are synchronized, and transfer them only after synchronization of the processed responses, so the release path can inspect successful CREATE responses and queue SMB2_close() after a later failure. Account for a remote open only after the close work is allocated and before it is queued, since the caller has not yet updated num_remote_opens. Mark the create+close compound used by smb2_unlink() so it is not closed again. Non-CREATE responses and compounds that already include a close keep their existing behavior.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: release unused CIS holds after channel attach hci_bind_cis() and hci_connect_cis() return one hci_conn hold for the ISO layer. A new channel association consumes that hold, which is eventually released by iso_conn_free(). There are two cases where iso_chan_add() does not create an association: it returns success when the socket is already attached to the same iso_conn, and it returns -EBUSY when another socket is attached. The hold returned for the current call is unused in both cases. This occurs when deferred setup calls iso_connect_cis() again for its existing socket, or when another socket attempts to reuse the CIS. Detect the idempotent case while the connection is locked and release the unused hold after iso_chan_add(). Also release it on -EBUSY. Do not drop it for other errors: a newly allocated iso_conn releases the transferred hold when its last temporary reference is put.

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Fix NULL dereference in tb_remove_work() There is a slight race between tb_remove_work() and tb_domain_remove() which leads to dereferencing a NULL tb->root_switch pointer inside tb_free_unplugged_xdomains(): Thread A Thread B tb_remove_work() tb_domain_remove() mutex_lock(&tb->lock) tb_stop() /* doesn't cancel a running callback */ cancel_delayed_work(&tcm->remove_work) ... tb_switch_remove(tb->root_switch) tb->root_switch = NULL mutex_unlock(&tb->lock) mutex_lock(&tb->lock) ... /* without checking ->root_switch */ tb_free_unplugged_xdomains(tb->root_switch) mutex_unlock(&tb->lock) Commit a8937f35cf39 ("thunderbolt: Remove XDomain from the bus without holding tb->lock") doesn't seem right to move tb_free_unplugged_xdomains() out of the &tb->lock section and the check for tb->root_switch, in particular. It states: For this reason separate removing the XDomain from the topology data structures (where we need the lock) from unregistering the device from the bus (where remove callbacks of the drivers are being called). tb_free_unplugged_xdomains() belongs to the former group of functions requiring the lock. And it also calls tb_xdomain_remove() which should only be called with &tb->lock held. Found by Linux Verification Center (linuxtesting.org) with Svace static analysis tool.

In the Linux kernel, the following vulnerability has been resolved: smb: client: discard post-EOF pagecache when extending a file via clone range cifs_remap_file_range() discarded the pagecache only for the folios overlapping the destination region, so when a clone extends the file the folio straddling the old EOF - which may hold data dirtied past EOF through an mmap - was never dropped and became visible as file content once the file was extended. Start the discard at the smaller of fstart and the old EOF. i_size is still old here, so nothing past the old EOF is flushed to the server.

In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Nullify "have run CPUs" mask pointer when freeing it Nullify have_run_cpus when freeing the mask, particularly in the error path of __sev_guest_init(), so that KVM doesn't have to subtly use sev->active to track whether or not the mask has been freed. As pointed out by Sashiko, blindly freeing the mask in sev_vm_destroy() results in a double-free if the mask is freed if __sev_guest_init() fails. Throw the logic in a helper as nullifying the pointer is frustratingly difficult and weird due to have_run_cpus being a single-entry array when CPUMASK_OFFSTACK=n. Deliberately don't use CPUMASK_VAR_NULL, as it's not directly assignable when the cpumask is on-stack, e.g. requires using a local variable and a memcpy(), which is beyond ridiculous. Furthermore, while clearing the on-stack bitmask is an unnecessary and arguably unwanted side effect, KVM absolutely relies on '0' being the "null" value given that the struct is zero-allocated. Opportunistically add an alloc() helper to pair with free(); there are just enough call sites to make doing so worthwhile.

In the Linux kernel, the following vulnerability has been resolved: serial: core: fix NULL pointer dereference in serial_core_unregister_port() port->port_dev is NULL when no port device is installed: it is cleared on teardown, and never set if registration failed before serial_core_port_device_add(). serial_core_unregister_port() passes it straight to serial_core_get_ctrl_dev(), which dereferences it: KASAN: null-ptr-deref in range [0x0000000000000040-0x0000000000000047] RIP: serial_core_unregister_port Call Trace: serial8250_unregister_port serial8250_remove unbind_store Return early when there is no port device, and read port->port_dev under port_mutex. Also clear port->port_dev on the serial_core_register_port() error path, where the port device has already been removed.

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_eth_soc: allocate dummy netdev sooner The RX rings and the shared NAPI are carried by an internal "dummy" netdev (eth->dummy_dev). mtk_probe() creates that dummy device, and adds the shared tx/rx NAPI to it, only after the MAC netdevs have been registered. That order has been there since the MT7623 support was added and leaves a window in which the netdevs are visible to the network core before the shared NAPI and the dummy device exist. If anything brings the first netdev up during that window (e.g. netifd opening the WAN link the instant the interface is registered), the first-open path runs without them. On NETSYS v2 and later SoCs mtk_rx_alloc() -> __xdp_rxq_info_reg() then dereferences eth->dummy_dev == NULL: WARNING: CPU: ... Missing net_device from driver in net/core/xdp.c and mtk_open() fails with -ENODEV. On NETSYS v1 SoCs (MT7621/MT7622/MT7623/MT7629) there is no page pool, so the same open instead calls napi_enable() on a napi_struct that netif_napi_add() has not initialised yet and dereferences a NULL napi->dev. Allocate the dummy netdev and add the shared tx/rx NAPI to it before the register_netdev() loop. Both the dummy-allocation failure and a register_netdev() failure now unwind through mtk_unreg_dev(), which unregisters the net_device notifiers and the netdevs registered so far, stopping a concurrently-opened netdev (ndo_stop) and its NAPI before the dummy carrier is freed. A netdev that opened during the window can also have queued the frame-engine reset worker (via the tx watchdog or phylink), so the probe error path now cancels eth->pending_work before freeing the shared state, as mtk_cleanup() already does on remove.

In the Linux kernel, the following vulnerability has been resolved: bpf: Skip detached progs in trampoline images that are still in use bpf_tramp_image_put() makes sure a trampoline image is not freed while a task may still be running in it, but nothing similar is done for the progs called by that image. Detach drops the last prog reference right away and the prog is freed after grace periods, on the basis that a task still in the traced function skips the fexit progs once the nop at ip_after_call is patched to a jump. That leaves out a task sleeping in a sleepable prog that runs before the detached one, which no grace period waits for: CPU 0 CPU 1 in image I, sleeping in prog S detach P from I's trampoline -> new image, bpf_tramp_image_put(I) bpf_prog_put(P), last ref grace periods, P freed back from S __bpf_prog_enter(P) call P->bpf_func If S and P are fexit progs the task is already past the patched jump, and fentry only images don't have one. On x86 this is an int3 in poisoned bpf_prog_pack memory: Oops: int3: 0000 [#1] SMP NOPTI CPU: 18 UID: 0 PID: 94573 Comm: x169 Not tainted 6.18.44 #1 PREEMPT(lazy) RIP: 0010:0xffffffffc0601d8d Call Trace: <TASK> ? bpf_trampoline_6442515411+0x1a4/0x21b bpf_lsm_bprm_committed_creds+0x5/0x10 security_bprm_committed_creds+0x5f/0x70 begin_new_exec+0x2d6/0x410 ... We hit this in production when progs attached through trampolines got detached while their hooks were busy, and it was independently found with a fuzzer and KASAN. Have the JITs emit a patchable nop in front of each prog call sequence and record it in the image. When a prog is detached, patch its nop to a jump over the call sequence. Progs that stay attached keep running for the tasks that are in the image, and ip_after_call isn't needed anymore. The task can be in any image that isn't freed yet, not only in the current one. It sleeps in image I1 that calls S, P and Q, then P is detached and the trampoline moves to image I2, then Q is detached and its call is still in I1. So the trampoline keeps a list of its images until they are freed, and detaching a prog patches its nop in all of them. Images hold a reference on the trampoline for that long. On riscv and loongarch a jump of any range takes several instructions, and a task preempted in the middle of them could resume into half of the new sequence. The nop is a single instruction there, patched to a near branch through arch_bpf_trampoline_skip(). With the extra nops, BPF_MAX_TRAMP_LINKS progs no longer fit in a page on x86 and arm64 (and already didn't on powerpc), so lower the limit there like s390 does.

In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: fix NULL dereference in set_coalesce before first open The Rx ring priv and index are only set in bcmgenet_init_rx_ring(), which runs at open. Setting the Rx coalescing parameters on an interface that was never opened, e.g. "ethtool -C eth0 rx-usecs 50", dereferences a NULL ring->priv. The oops happens with RTNL held, so networking stays stuck until a reboot: Unable to handle kernel paging request at virtual address 0000000000002788 pc : bcmgenet_set_rx_coalesce.isra.0+0x10/0x88 lr : bcmgenet_set_coalesce+0xe8/0x180 Call trace: bcmgenet_set_rx_coalesce.isra.0+0x10/0x88 (P) __ethnl_set_coalesce.isra.0+0x490/0x570 ethnl_set_coalesce+0x48/0xc0 ethnl_default_set_doit+0xf4/0x230 genl_family_rcv_msg_doit+0xe8/0x160 genl_rcv_msg+0x220/0x2a0 netlink_rcv_skb+0x68/0x140 genl_rcv+0x40/0x60 netlink_unicast+0x338/0x3c0 netlink_sendmsg+0x19c/0x3f8 __sock_sendmsg+0x64/0xc0 __sys_sendto+0x124/0x198 __arm64_sys_sendto+0x30/0x48 Set priv and index at probe. Writing the registers while the interface is down is harmless because open resets the MAC and bcmgenet_init_rx_coalesce() reapplies the stored values. It was observed on a Raspberry Pi CM4, but should apply to all other genet devices.

In the Linux kernel, the following vulnerability has been resolved: xsk: Use a 32-bit compare in xsk_map_gen_lookup xsk_map_gen_lookup() loads a u32 key and compares it with max_entries using BPF_JMP_IMM. BPF immediates are sign-extended to 64 bits, so a max_entries value of 0x80000000 or higher becomes a threshold larger than every zero-extended 32-bit key. An out-of-range index then skips the bounds check and the generated lookup reads past xsk_map[]. Compare with BPF_JMP32_IMM so the check stays in 32-bit unsigned range.

In the Linux kernel, the following vulnerability has been resolved: block: reject polled dio with user integrity metadata IOCB_HAS_METADATA leaves iocb->private as a uio_meta, while iocb_bio_iopoll() expects a bio. Since 2729a60bbfb9, metadata I/O always uses __blkdev_direct_IO(), which never publishes the bio for polling, so IOPOLL calls bio_poll() on the uio_meta. Reproducer: io_uring IOPOLL plus a PI attribute on an integrity device (scsi_debug dif=1 dix=1). KASAN reports: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000004 KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027] RIP: 0010:bio_poll+0x9d/0x4b0 Call Trace: iocb_bio_iopoll+0x5b/0x80 io_uring_classic_poll+0xf3/0x140 io_do_iopoll+0x4e3/0xc00 io_iopoll_check+0x275/0x560 __do_sys_io_uring_enter+0x2e5/0x720 Return -EOPNOTSUPP when HIPRI is combined with user metadata.

In the Linux kernel, the following vulnerability has been resolved: virt: vmgenid: set driver_data before registering notification handlers Both probe paths register their notification handler before assigning driver_data, which the handler dereferences. In the devicetree path, the notification IRQ can fire as soon as devm_request_irq() registers the handler: the interrupt may already be pending at probe time, for example when a VMM injects the generation-changed notification while restoring a guest from a snapshot that was taken before the driver had probed (Firecracker does exactly this on snapshot restore). The IRQ is also requested with IRQF_SHARED, so another device sharing the line can trigger the handler just as early. The handler then calls vmgenid_notify(), which dereferences the still-NULL driver_data and panics: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.18.38+ #1 PREEMPT(none) Hardware name: linux,dummy-virt (DT) pc : vmgenid_notify.isra.0+0x24/0x8c lr : vmgenid_of_irq_handler+0x14/0x34 Call trace: vmgenid_notify.isra.0+0x24/0x8c (P) vmgenid_of_irq_handler+0x14/0x34 __handle_irq_event_percpu+0x44/0x1bc handle_irq_event+0x4c/0xb4 handle_fasteoi_irq+0xf8/0x1f8 The ACPI path has the same ordering problem: the handler is installed with acpi_install_notify_handler() before driver_data is assigned. ACPI notifications are dispatched asynchronously from a workqueue, so the window is narrow, but a notification arriving between the two calls hits the same NULL dereference. Assign driver_data before registering the handlers. The state is fully initialized at that point, so the handlers are safe to run. Should registration fail, the probe error path leaves no dangling pointer behind: the driver core clears driver_data in device_unbind_cleanup().

In the Linux kernel, the following vulnerability has been resolved: tpm: Disable TPM on null key name mismatch The null key name check exists to protect against TPM reset attacks, so a mismatch should stop the device from serving further requests. Currently it does not disable the chip when it finds a mismatch. The mismatch is logged: tpm tpm0: null key integrity check failed but the chip keeps serving commands: / # tpm2_getcap -c properties-fixed TPM_PT_FAMILY_INDICATOR: as UINT32: 0x08322e3000 as string: "2.0" ... tpm2_load_null() where the null key name check is run sets the chip as disabled only if the rc is non zero. When the mismatch is seen, rc is zero at that point and it returns success. The other issue is that the caller expects the null key handle to be populated when the function returns 0 which it does here without writing the handle and proceeds assuming the null key handle is valid. During the test, I noticed that tpm2_start_auth_session() uses the uninitialized stack value as the key handle since tpm2_load_null() returns 0 despite the integrity failure and proceeds with TPM2_CC_START_AUTH_SESS with this value as salt key handle. Set rc to -ENODEV on the mismatch. The error path then disables the chip and returns the correct code to the caller. Tested in QEMU with swtpm and CONFIG_TCG_TPM2_HMAC=y by making TPM2_CC_CONTEXT_LOAD fail with TPM2_RC_INTEGRITY and changing the name of the re-created null key. The chip is now disabled on the mismatch.

In the Linux kernel, the following vulnerability has been resolved: pfcp: fix socket lifetime on netdevice registration failure pfcp_newlink() creates the UDP socket before register_netdevice(). If registration fails after pfcp_dev_init() succeeds, the core calls pfcp_dev_uninit(), which releases the socket and clears pfcp->sk. The newlink error path then releases it again, causing a NULL pointer dereference. This was observed with failslab fault injection: FAULT_INJECTION: forcing a failure. kobject: kobject_add_internal failed for pfcp0 (error: -12 parent: net) BUG: KASAN: null-ptr-deref in udp_tunnel_sock_release+0x1c/0x50 Read of size 8 at addr 0000000000000120 by task ip/1037 Call trace: show_stack+0x18/0x24 (C) dump_stack_lvl+0x78/0x90 print_report+0x468/0x5cc kasan_report+0xa4/0xf0 __asan_load8+0x7c/0xd0 udp_tunnel_sock_release+0x1c/0x50 pfcp_newlink+0x128/0x184 rtnl_newlink+0x848/0xe44 rtnetlink_rcv_msg+0x468/0x514 netlink_rcv_skb+0xc0/0x1f0 rtnetlink_rcv+0x18/0x24 netlink_unicast+0x4b8/0x558 netlink_sendmsg+0x2b8/0x584 ... Return from pfcp_del_sock() if pfcp->sk is NULL.

In the Linux kernel, the following vulnerability has been resolved: net/packet: prevent TX_RING byte count overflow tpacket_snd() drains every SEND_REQUEST frame in a TX ring and adds each valid packet length to the signed int len_sum. Userspace can recycle completed frames concurrently, so a single blocking send call is not bounded by the ring size. After enough successful transmissions len_sum wraps into the negative range. In particular, 65536 65535-byte frames followed by a 65007-byte frame produce 0xfffffdef, or -EIOCBQUEUED. sock_sendmsg_nosec() treats that as an impossible return and triggers a BUG. On systems configured to panic on oops, a CAP_NET_RAW holder can panic the host kernel. Stop before the next frame would make the byte count exceed INT_MAX. The positive short count leaves that frame pending for a later send call. A two-thread TPACKET_V2 reproducer triggered the BUG on an arm64 build of Linux 7.3-rc4. With this change, the same reproducer returned the expected positive short count without an oops.

In the Linux kernel, the following vulnerability has been resolved: nfc: fix use-after-free in nfc_get_local_general_bytes Commit 6709d4b7bc2e ("net: nfc: Fix use-after-free caused by nfc_llcp_find_local") attempted to fix a use-after-free (UAF) issue by invoking nfc_llcp_local_put(local) after accessing local->gb. However, if the reference count drops to zero, local is freed immediately, leading to a use-after-free when callers access the returned pointer. Alternative approaches using dynamic allocation (e.g. kmemdup) introduced memory leaks because callers consistently treat the returned pointer as borrowed memory. Fix this properly by refactoring nfc_llcp_general_bytes() and nfc_get_local_general_bytes() to accept a caller-provided output buffer (out_gb) and its maximum length (gb_max_len). The general bytes are safely copied into out_gb before calling nfc_llcp_local_put(local), ensuring safe lifetime management without ownership transfer complications. Update all callers across drivers (microread, pn533, pn544, st21nfca, digital_dep, and nci) to provide their own destination buffers and pass them to nfc_get_local_general_bytes().

In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: conntrack: avoid modifying shared unconfirmed ct entry In a case where skb with an unconfirmed ct entry gets cloned, we may end up committing both but with different sets of extensions. The series of events: 1. The first clone wants to commit and runs the helpers wiring up the extension pointer into the expectation list. 2. Then it looses the confirmation keeping the entry unconfirmed. 3. Second clone now wants to commit labels and adds the new extension for that breaking the pointer in the expectation list causing UAF on the destruction path later. While this is possible to trigger, there should be no practical network pipeline where committing both clones without modifications into the same zone is needed. So, let's just reset the entry in case for some reason we got an skb with a shared one during commit. This doesn't affect any known use cases, but avoids any potential problems with sharing and modification of the unconfirmed ct entry. The fixes tag points to the introduction of helpers, since that's the main UAF trigger for the sharing.

In the Linux kernel, the following vulnerability has been resolved: net: skbuff: fix pull-bound underflow in skb_checksum_setup_ipv6() skb_maybe_pull_tail() subtracts skb_headlen(skb) from the unsigned max argument and passes the result to __pskb_pull_tail() as a signed int. The function does not ensure that max is at least skb_headlen(skb). This can happen while parsing IPv6 extension headers when an skb already has a linear area larger than MAX_IPV6_HDR_LEN. Once the parser needs data beyond the linear area, max - skb_headlen(skb) wraps and is converted to a negative delta. __pskb_pull_tail() then passes that negative length to skb_copy_bits(), where it can become a very large copy length. Pass the requested length itself as the pull bound at the three extension-header call sites, so the delta can no longer go negative.

In the Linux kernel, the following vulnerability has been resolved: drm/bridge: samsung-dsim: fix TE GPIO lifetime for host attach When the Exynos DSI driver was generalized into samsung-dsim, the TE GPIO acquisition was switched from gpiod_get_optional() to devm_gpiod_get_optional() while keeping the matching gpiod_put() calls. That combination is wrong for a managed descriptor. However, dropping the puts and keeping the managed get is also wrong: samsung_dsim_register_te_irq() runs from the DSI host attach callback, and host detach/reattach can happen without destroying the device that owns the managed action. A second attach would then request the GPIO again without having released it. Switch back to a non-managed gpiod_get_optional() and keep the explicit gpiod_put() on the request_irq() error path and in samsung_dsim_unregister_te_irq(). [Luca: remove unnecessary comment]

In the Linux kernel, the following vulnerability has been resolved: EDAC/altera: Use parent device for devres in altr_portb_setup() Anchor the devres group and the devm-managed IRQ requests in altr_portb_setup() to the actual parent device (device->edac->dev) instead of the embedded struct device inside the copied per-port altr_edac_device_dev. This keeps devres_open_group(), devm_request_irq(), devres_remove_group() and devres_release_group() all referring to the same long-lived device so the group and the resources allocated inside it are torn down together.

In the Linux kernel, the following vulnerability has been resolved: mptcp: options: fix uninit-value in mptcp_write_data_fin When sending a DATA_FIN without data, and because the DATA_FIN occupies 1 octet of the connection-level sequence space [1], it is then required to add a DSS mapping with specific values. If the checksum has been negotiated, it also needs to be computed, and included in the outgoing packet, and thus the initial csum data needs to be reset to 0 as well. This is no longer the case since commit cfcceb7a39fc ("tcp: shrink per-packet memset in __tcp_transmit_skb()"), because the whole ext_copy structure is no longer zeroed by default. This seems to be the only case where use_map is changed and set afterwards, so initialising the csum field only in this case, along with other fields for this specific case.

In the Linux kernel, the following vulnerability has been resolved: media: qcom: iris: fix runtime PM reference leaks Use pm_runtime_resume_and_get() in iris_enable_power_domains() to avoid leaking a runtime PM usage count on failure. Also ensure pm_runtime_put_sync() is always called in iris_disable_power_domains(), even when iris_opp_set_rate() fails, so runtime PM references remain balanced.

In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: do not dissolve gigantic pages without runtime support dissolve_free_hugetlb_folio() doesn't check hstate_is_gigantic_no_runtime(h) though remove_hugetlb_folio()/ update_and_free_hugetlb_folio() silently bail for such folios, so it frees a still-listed folio and, on vmemmap restore failure, the add_hugetlb_folio() rollback corrupts the free list.

In the Linux kernel, the following vulnerability has been resolved: xfs: drop dquot flush lock when we can't find a buffer to flush LOLLM noticed that xfs_qm_flush_one fails to drop the dquot flush lock if it can't grab the buffer associated with the dquot. Since there's no buffer, nobody else is going to drop the dqflock, so we need to do it ourselves.

In the Linux kernel, the following vulnerability has been resolved: xfs: don't let hidden_space go negative in xfs_metafile_resv_init LOLLM points out that if the amount of fdblocks that we can reserve for a metadata btree file goes below the space already used by that file, then the hidden_space subtraction can underflow, causing xfs_dec_fdblocks to subtract a huge amount of space. We never want the target to be less than the used sapce, so fix the logic that adjusts dblocks_avail downwards. Also fix an error in the adjacent comment.

In the Linux kernel, the following vulnerability has been resolved: smb: client: delete compound mids on send failure before unlock When sending a compound request fails, smb_send_rqst() kicks off a reconnect. compound_send_recv() still has those mids on pending_mid_q, but it unlocks the server without removing them first. During reconnect, cifs_abort_connection() walks pending_mid_q and runs each mid callback. With no response yet, those callbacks return credits and drop in_flight. Then compound_send_recv()'s send-error path returns the same credits again. in_flight ends up decremented twice and smb2_add_credits() WARNs. syzbot hits this during SMB2_negotiate when the socket send fails. cifs_call_async() already calls delete_mid() before unlock on send failure. Do the same for compound chains and set cancelled_mid[] so the out: path does not delete them again.

In the Linux kernel, the following vulnerability has been resolved: smb: client: clean up failed cached directory opens open_cached_dir() sends CREATE and QUERY_INFO as a compound request. If the CREATE succeeds but a later command returns an error, the function must retain the CREATE FID so common cleanup can issue SMB2_close(). It also must not treat a response error as a valid CREATE. Validate the CREATE response before using its fields, record the FIDs, and mark the handle open before handling errors from later compound commands. Move the -EREMCHG reconnect handling before response validation so a missing response does not hide the reconnect request. Count the handle when it is marked open; confirmed close responses decrement the counter, while existing close retry behavior remains best effort on transport failures.

In the Linux kernel, the following vulnerability has been resolved: drm/virtio: fix memory leak of fence event on execbuffer failure virtio_gpu_execbuffer_ioctl() reserves a DRM event with drm_event_reserve_init() when VIRTGPU_EXECBUF_RING_IDX selects a ring that userspace has enabled polling for. virtio_gpu_init_submit() does this before the BO handles, the command buffer, the syncobj arrays and the in-fence are processed, so every later error path runs with the event already pending, including plain argument validation failures such as an invalid bo_handle or an in-syncobj that carries no fence. On those paths, virtio_gpu_cleanup_submit() drops the out-fence without cancelling the event. The fence is freed without ever having been emitted, taking the only driver-side pointer to the event with it. Closing the DRM file does not help. drm_events_release() unlinks pending events but deliberately leaves the freeing to the driver's later drm_send_event(), which never runs for an orphaned event, so the allocation is leaked permanently. Found when fuzzing the virtio driver with Syzkaller: BUG: memory leak unreferenced object 0xffff88802c176e80 (size 96): comm "syz.1.367", pid 10561, jiffies 4294960122 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ c8 6e 17 2c 80 88 ff ff 00 00 00 00 00 00 00 00 .n.,............ backtrace (crc e1973c6b): kmemleak_alloc_recursive include/linux/kmemleak.h:44 [inline] slab_post_alloc_hook mm/slub.c:4597 [inline] slab_alloc_node mm/slub.c:4917 [inline] __kmalloc_cache_noprof+0x49d/0x6f0 mm/slub.c:5485 _kmalloc_noprof include/linux/slab.h:988 [inline] _kzalloc_noprof include/linux/slab.h:1309 [inline] virtio_gpu_fence_event_create drivers/gpu/drm/virtio/virtgpu_submit.c:282 [inline] virtio_gpu_init_submit drivers/gpu/drm/virtio/virtgpu_submit.c:398 [inline] virtio_gpu_execbuffer_ioctl+0xbbf/0x1aa0 drivers/gpu/drm/virtio/virtgpu_submit.c:505 drm_ioctl_kernel+0x1f4/0x3e0 drivers/gpu/drm/drm_ioctl.c:817 drm_ioctl+0x5f4/0xc70 drivers/gpu/drm/drm_ioctl.c:914 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x116/0x800 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fix by cancelling and freeing the DRM event on the execbuffer error path before dropping the fence. Clear the fence's event pointer after cancellation so it does not retain a dangling pointer.

In the Linux kernel, the following vulnerability has been resolved: smb: client: close handle after create-context parsing failure SMB2_open() accounts a successful CREATE response as a remote open before parsing its create contexts. If smb2_parse_contexts() rejects malformed context data, SMB2_open() returns without closing the handle, leaving the server-side handle open and num_remote_opens elevated. Close the handle after a post-CREATE context parsing failure so the error path releases the remote resource and balances the open count.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: validate frame length before control and FCS access l2cap_data_rcv() unpacks either a two-byte or four-byte control field without first ensuring that it is present. A short ERTM or streaming-mode frame can therefore cause an out-of-bounds read. There is a second short-frame case when CRC16 is enabled. After the control field is pulled, l2cap_check_fcs() subtracts two from skb->len without checking it. If fewer than two bytes remain, the subtraction wraps; skb_trim() leaves the buffer unchanged and the subsequent FCS load reads past the logical end of the frame. Validate that the frame contains both its control field and, when enabled, its FCS before either field is accessed.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sock: reject out-of-range OCF values The raw HCI socket security filter has 128 OCF bits per supported OGF, but masks the 10-bit OCF with 127 before looking up the command. An unprivileged socket can therefore submit a reserved OCF that aliases an allowlisted command modulo 128. A conforming controller should reject reserved opcodes. Nevertheless, the security decision must apply to the opcode that will actually be sent, especially since controller-specific behavior is outside the host stack's control. Reject OCF values that cannot be represented by the security filter instead of aliasing them onto an unrelated command.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix create context out-of-bounds reads smb2_parse_contexts() validates the complete create-context area but does not limit each record to its Next field before dispatching it. A malformed chain can therefore expose bytes beyond the current context to a handler. The QFid handler also used a full response-structure cast although it only reads DiskFileId. The SMB2/SMB3 lease parsers made the same layout assumption: they read LeaseState and LeaseFlags at canonical offsets rather than at DataOffset. A valid non-canonical DataOffset could therefore yield unrelated in-bounds data, while a short DataLength was still accepted. Limit each context to its Next value, reject offsets before the context header, and reject malformed chains. Bound the name range by the current context and do not dispatch a known handler when DataLength is zero. Read the QFid DiskFileId only when the context data covers that field. Parse the lease context from DataOffset and require DataLength to match the v1 or v2 lease_context size used by ksmbd. A size mismatch skips lease parsing without failing the open.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sock: validate event length before filtering is_filtered_packet() reads the event code from skb->data[0] without first checking that the skb is nonempty. When an opcode filter is configured, it also reads the command opcode at offsets 3 or 4 without checking that a Command Complete or Command Status event is long enough. hci_send_to_sock() invokes the filter before hci_event_packet() validates the event header. A malformed event supplied by a controller or a vhci device can therefore cause an out-of-bounds read. Keep the unmasked event code for the opcode checks. The masked value is needed for the 64-bit event bitmap, but using it to identify command events aliases event codes above 0x3f. In particular, Synchronous Train Complete (0x4f) was treated as Command Status (0x0f) even though its payload has no opcode. Reject actual command events that are too short for the field being inspected. A truncated command event cannot match a configured opcode.

In the Linux kernel, the following vulnerability has been resolved: sched_ext: Derive SCX_RQ_IN_WAKEUP from the core enqueue flags schedule_deferred_locked() skips scheduling a deferred action while SCX_RQ_IN_WAKEUP is set and relies on the task_woken_scx() call that follows a wakeup enqueue to run it. enqueue_task_scx() sets the flag from the merged enqueue flags, which include the flags stashed for a remote activation. move_remote_task_to_local_dsq() thus sets SCX_RQ_IN_WAKEUP on the destination rq when the moved task was woken up, although no task_woken_scx() follows that activation. An IMMED insert into a busy destination requests a local reenqueue during that enqueue. The request gets linked but not scheduled and stays pending until an unrelated wakeup or preemption on that CPU runs the deferred actions. The IMMED task sits behind the running task in the meantime. If nothing runs them before the scheduler is disabled, the request outlives the scheduler and points into its freed per-cpu area, which the next scheduler dereferences from run_deferred(). Test the core enqueue flags for the wakeup bit. Only the core's wakeup path is followed by task_woken_scx().

In the Linux kernel, the following vulnerability has been resolved: RISC-V: KVM: Synchronize hrtimer callback during teardown The non-Sstc hrtimer callback clears next_set before its final uses of the enclosing vCPU. If teardown observes next_set as false while the callback is still running, kvm_riscv_vcpu_timer_cancel() skips hrtimer_cancel() and kvm_destroy_vcpus() can free the vCPU before the callback enters kvm_riscv_vcpu_set_interrupt(). A guest can arm the timer with SBI TIME and request shutdown with SBI legacy shutdown or SRST. A VMM that honors KVM_EXIT_SYSTEM_EVENT and destroys the VM supplies the teardown side of the race; no post-launch host ioctl is needed to arm or request teardown. On upstream master 62cc90241548, generic KASAN reported: BUG: KASAN: slab-use-after-free in do_raw_spin_lock Write of size 4 at addr ff60000005e58898 kvm_riscv_vcpu_set_interrupt kvm_riscv_vcpu_hrtimer_expired __hrtimer_run_queues hrtimer_interrupt The object was allocated by KVM_CREATE_VCPU and freed concurrently by: kvm_destroy_vcpus kvm_arch_destroy_vm kvm_destroy_vm __fput For deterministic validation, I added mdelay(1000) immediately after the existing next_set = false assignment. This only widens the existing post-clear callback window. A no-delay trace build naturally reached the callback-after-teardown-start/before-deinit ordering in 12 of 200 runs, but 1,500 stock-kernel stress iterations did not produce a KASAN report, so natural reproduction is timing-sensitive. Always invoke hrtimer_cancel() for an initialized timer. Preserve the existing -EINVAL result when the timer is no longer set, but only after synchronizing with a running callback. With this patch, hrtimer_cancel() blocked for the full widened callback window before vCPU destruction. KASAN reported no error in 100 fixed-and-widened runs or 200 fix-only timing-sweep runs.

In the Linux kernel, the following vulnerability has been resolved: PCI: of_property: Omit bus properties without a subordinate bus A bridge (a device with a Type 1 header) may not have a secondary bus allocated (pdev->subordinate), e.g., if there are no available bus numbers or the bridge secondary/subordinate bus numbers are not writable. The dynamic OF helpers of_pci_prop_bus_range() and of_pci_prop_intr_map() dereference pdev->subordinate without checking it. When CONFIG_PCI_DYNAMIC_OF_NODES is enabled, this can cause a NULL pointer dereference and early boot hang. Generate 'bus-range' and 'interrupt-map' properties only when a subordinate bus exists. Keep the node and its remaining properties for bridges without one. The problem was latent since 407d1a51921e ("PCI: Create device tree node for bridge"), but wasn't reachable until 1f340724419e ("PCI: of: Create device tree PCI host bridge node"), which appeared in v6.15. Before 1f340724419e, of_pci_make_dev_node() returned early because the parent OF node was missing. [bhelgaas: move pdev->subordinate test to callees, commit log]

In the Linux kernel, the following vulnerability has been resolved: HID: alps: unregister DualPoint Stick input device on remove alps_input_configured() allocates a second input device ("DualPoint Stick") with input_allocate_device() and registers it, but the alps_driver struct has no .remove handler and input2 is not tracked in hdev->inputs. The default remove path (hid_hw_stop -> hidinput_disconnect) only iterates hdev->inputs, so input2 is never unregistered and leaks on every device removal. Add a .remove handler that stops the device first (preventing URB callbacks from touching input2 during teardown) and then unregisters input2.

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: Fix runtime PM leak in nouveau_connector_detect() If nvif_outp_edid_get() fails, nouveau_connector_detect() returns early without dropping the runtime PM reference taken at the start of the function, keeping the device powered on until the next successful detect. Balance the reference on the error path like the other exit paths do.

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau: RCU-free the scheduler-containing nouveau_sched struct nouveau_sched embeds a struct drm_gpu_scheduler (base). nouveau_sched_destroy() calls nouveau_sched_fini() (which does drm_sched_fini(&sched->base)) and then frees the object with plain kfree(sched). drm_sched_fence_get_timeline_name() returns fence->sched->name, and the scheduler fence keeps a .release callback so it is not ops-detached on signalling. A finished fence exported to userspace via drm_syncobj / sync_file therefore keeps pointing at &sched->base after nouveau_sched_destroy(), and a later get_timeline_name() -- reachable unprivileged through SYNC_IOC_FILE_INFO -- dereferences freed memory (KASAN slab-use-after-free read). Per the dma-fence lifetime contract the exporter must keep the data backing a signalled fence alive for an RCU grace period. Free the scheduler-containing object with kfree_rcu() instead of kfree().

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/dmem: pin VRAM for the whole registered range Commit c32287471077 ("gpu/drm/nouveau: enable THP support for GPU memory migration") grew the device-private region that nouveau_dmem_chunk_alloc() registers from DMEM_CHUNK_SIZE to DMEM_CHUNK_SIZE * NR_CHUNKS, but left the VRAM buffer object backing that region at DMEM_CHUNK_SIZE. nouveau_dmem_page_addr() returns chunk->bo->offset plus the page's offset within the registered region, so every page past the first chunk resolves to VRAM outside the buffer object. Size the buffer object to the region it backs.

In the Linux kernel, the following vulnerability has been resolved: drm/i915: fix incorrect RCU teardown order i915_gem_busy_ioctl uses dma_resv_for_each_fence_unlocked() to iterate over the fences in an GEM object without holding a reference but only the RCU read side lock. What can happen here is that the GEM object is destroyed concurrently while i915_gem_busy_ioctl is still running. This won't free the GEM objects memory, but still drops all the dma_fence references. Now when dma_resv_for_each_fence_unlocked() sees a destroyed dma_fence it assumes that a new fence list was installed and re-starts the loop. But in the case of a destroyed GEM object a new fence list is never installed, only the old one freed and therefore the iteration never finishes resulting in an endless loop. The solution is to drop the fence references only after the RCU grace period. The fixes tag is not necessary the patch introducing the problem, but the one making it so worse that we need to address it. This problem was pointed out by Sashiko-bot. (cherry picked from commit 5113479556025093bf8133bb2dcaa33be2d50921)

In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Propagate map failures correctly from pvr_mmu_map_sgl() Map failure from pvr_mmu_map_sgl() interface was not returned correctly to pvr_mmu_map() interface. This resulted in pvr_mmu_map() interface to continue instead of returning an error to caller. Fix it by returning a proper error code from pvr_mmu_map_sgl() interface. Call stack for crash: [ 1179.286237] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 [ 1179.295067] Mem abort info: [ 1179.297877] ESR = 0x0000000096000004 [ 1179.301656] EC = 0x25: DABT (current EL), IL = 32 bits [ 1179.306987] SET = 0, FnV = 0 [ 1179.310048] EA = 0, S1PTW = 0 [ 1179.313198] FSC = 0x04: level 0 translation fault [ 1179.318096] Data abort info: [ 1179.320993] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 1179.326483] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 1179.331546] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 1179.336895] user pgtable: 4k pages, 48-bit VAs, pgdp=000000009822a000 [ 1179.343402] [0000000000000008] pgd=0000000000000000, p4d=0000000000000000 [ 1179.350243] Internal error: Oops: 0000000096000004 [#2] SMP [ 1179.355908] Modules linked in: powervr gpu_sched drm_shmem_helper drm_gpuvm drm_exec xhci_plat_hcd xhci_hcd dwc3 usbcore usb_common snd_soc_simple_card snd_soc_simple_card_utils dwc3_am62 at24 sa2ul sha512 libsha512 sha256 authenc sch_fq_codel fuse dm_mod ipv6 [ 1179.378992] CPU: 1 UID: 1000 PID: 680 Comm: deqp-vk Tainted: G D 6.17.0 #1 PREEMPT [ 1179.388120] Tainted: [D]=DIE [ 1179.390994] Hardware name: Texas Instruments AM625 SK (DT) [ 1179.396467] pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1179.403415] pc : pvr_mmu_op_context_unmap_curr_page+0x6c/0x134 [powervr] [ 1179.410140] lr : pvr_mmu_op_context_unmap_curr_page+0x58/0x134 [powervr] [ 1179.416848] sp : ffff8000839ab8c0 [ 1179.420153] x29: ffff8000839ab8c0 x28: 0000000000000001 x27: 000000008f386000 [ 1179.427283] x26: ffff000016d1df98 x25: 0000000000247000 x24: 00000000000001e6 [ 1179.434413] x23: 0000000000000002 x22: 000000000000ffff x21: 0000000000000247 [ 1179.441540] x20: 0000000000000245 x19: ffff000016d1df60 x18: 0000000000000002 [ 1179.448668] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000001 [ 1179.455793] x14: 0000000000060810 x13: ffff80007fffffff x12: ffff000004190480 [ 1179.462921] x11: ffff8000853f7000 x10: ffff8000811ae000 x9 : ffff0000041900b8 [ 1179.470051] x8 : 0000000000000000 x7 : 00000000990c4001 x6 : 0000000000000007 [ 1179.477177] x5 : ffff000016d1df60 x4 : 0000000000000000 x3 : ffff00000a7d8000 [ 1179.484306] x2 : 00000000000001ff x1 : 0000000000000000 x0 : 0000000000000000 [ 1179.491433] Call trace: [ 1179.493872] pvr_mmu_op_context_unmap_curr_page+0x6c/0x134 [powervr] (P) [ 1179.500582] pvr_mmu_map+0x31c/0x388 [powervr] [ 1179.505027] pvr_vm_gpuva_map+0x40/0x88 [powervr] [ 1179.509732] __drm_gpuvm_sm_map+0x250/0x44c [drm_gpuvm] [ 1179.514952] drm_gpuvm_sm_map+0x48/0x5c [drm_gpuvm] [ 1179.519822] pvr_vm_bind_op_exec+0x64/0x70 [powervr] [ 1179.524785] pvr_vm_map+0x1f8/0x2a8 [powervr] [ 1179.529142] pvr_ioctl_vm_map+0x12c/0x188 [powervr] [ 1179.534018] drm_ioctl_kernel+0xb8/0x128 [ 1179.537941] drm_ioctl+0x21c/0x4ec [ 1179.541337] __arm64_sys_ioctl+0xac/0x108 [ 1179.545344] invoke_syscall+0x44/0x100 [ 1179.549091] el0_svc_common.constprop.0+0x40/0xe0 [ 1179.553790] do_el0_svc+0x1c/0x28 [ 1179.557106] el0_svc+0x34/0xf0 [ 1179.560159] el0t_64_sync_handler+0xd0/0xe4 [ 1179.564334] el0t_64_sync+0x198/0x19c [ 1179.567996] Code: 54000300 35000360 f9402261 79409a62 (f9400421) [ 1179.574081] ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: ipe: protect the dm-verity root hash with RCU ipe_bdev_setintegrity() frees the old root hash when dm-verity publishes a new one on ->preresume, while policy evaluation can still be dereferencing it. Protect the root hash with RCU. The evaluation path already runs under rcu_read_lock(). [FW: remove model name according to latest guideline]

In the Linux kernel, the following vulnerability has been resolved: fsl/fman: Fix clk reference leak in read_dts_node() of_clk_get() returns a clock with its reference count incremented, but read_dts_node() only uses it to read the rate and never calls clk_put(). The clock is not stored anywhere, so the reference cannot be released later either. Release the clock once its rate has been read, which also covers the error path taken when the rate is zero.

In the Linux kernel, the following vulnerability has been resolved: writeback: report a Tasks-RCU quiescent state per cgwb drain pass cleanup_offline_cgwbs_workfn() drains a dying cgwb by calling cleanup_offline_cgwb() until it returns false, with a cond_resched() between passes. On a CONFIG_PREEMPTION kernel that cond_resched() does nothing: _cond_resched() is a plain "return 0", and under PREEMPT_DYNAMIC the full and lazy modes disable it. Since commit 7dadeaa6e851 ("sched: Further restrict the preemption modes") those are the only two models on the architectures with PREEMPT_LAZY support, arm64 and x86 among them, so the drain loop never reports a Tasks-RCU quiescent state. A worker draining a cgwb with millions of attached inodes runs for minutes. On a 6.18 arm64 host in lazy mode the cgwb worker drained one dying cgroup's writeback domain for over 11 minutes. A BPF program unlink (bpf_trampoline_unlink_prog -> bpf_trampoline_update -> unregister_ftrace_direct -> ftrace_shutdown -> synchronize_rcu_tasks()) waited on that grace period while holding the trampoline mutex, 42 tasks queued behind it in D state, and the hung task detector fired at 614 s and panicked the host. Any BPF or ftrace detach during a long drain inherits the drain's length. Fix this by calling cond_resched_tasks_rcu_qs() so we do not stall out anybody who calls sycnrhonize_rcu_tasks(). We put this in a do { } while loop because if we have many small cgroups cleanup_offline_cgwb() will return false and we will never call cond_resched_tasks_rcu_qs(), creating the same problem.

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix spurious warning for benign stage 2 teardown race kvmtool was used to establish an L1 guest with 8 CPUs and 8 GiB of RAM, an L2 guest with 4 CPUs and 4 GiB of RAM and an L3 guest with 2 CPUs and 2 GiB of RAM, all of which was then exited. Under memory pressure in the L0 host warnings were observed due to migration triggered by compaction: WARNING: arch/arm64/kvm/mmu.c:336 at __unmap_stage2_range+0x64/0x80, CPU#5: kcompactd0/66 Which was, in turn, triggered by an MMU notifier for the host invalidation: mmu_notifier_invalidate_range_start() -> ... -> kvm_mmu_notifier_invalidate_range_start() -> kvm_mmu_unmap_gfn_range() -> kvm_unmap_gfn_range() -> kvm_nested_s2_unmap() -> kvm_stage2_unmap_range() -> __unmap_stage2_range() -> stage2_apply_range() <- -EINVAL, triggering a WARN_ON() Racing with L0's teardown of stage 2 page tables: exit_mm() -> mmput() -> __mmput() -> exit_mmap() -> mmu_notifier_release() -> ... -> kvm_mmu_notifier_release() -> kvm_flush_shadow_all() -> kvm_arch_flush_shadow_all() -> kvm_free_stage2_pgd() -> [ acquire kvm->mmu_lock for write ] -> mmu->pgt = NULL [ among other tasks ] -> [ release kvm->mmu_lock for write ] It turns out there is a benign race resulting in a spurious warning: Thread A - notify: migration | Thread B - notify: release -------------------------------|--------------------------------- < kvm->mmu_lock held > | stage2_apply_range() | get mmu->pgt, check !NULL | ... | kvm_arch_flush_shadow_all() cond_resched_rwlock_write(); | < contend, sleep kvm->mmu_lock > < drop kvm->mmu_lock > | < acquire kvm->mmu_lock> | ... | kvm_free_stage2_pgd() | mmu->pgt = NULL | < invalidate MMU > | ... | < release kvm->mmu_lock > [ scheduled ] | stage2_apply_range() | < loop to next > | get, mmu->pgt, check !NULL | is NULL, return -EINVAL | __unmap_stage2_range() | WARN_ON(-EINVAL) <--- entirely spurious - the race was handled correctly. Fix the spurious warning by updating stage2_apply_range() to no longer treat concurrent PGT teardown on lock release as an error - whether the walker is tearing down page tables or doing something else this is a legitimate reason to abort the operation without error. This keeps the warning in place for all other circumstances. In practice only __unmap_stage2_range() actually does anything with the error so this only impacts that.

In the Linux kernel, the following vulnerability has been resolved: iio: adc: ade9000: fix NULL pointer dereference in clkout registration ade9000_setup_clkout() passes NULL as the register address when registering a divider clock. During clock registration, the common clock framework calls clk_divider_recalc_rate(), which dereferences the address through readl(). As a result, probing an ADE9000 configured as a clock provider with an external input clock crashes. CLKOUT passes CLKIN through without changing its rate. Register it as a 1:1 fixed-factor clock, which does not require register access. This change does not affect the configuration using the internal clock, for which the driver does not register a clock provider.

In the Linux kernel, the following vulnerability has been resolved: nvme-multipath: set BLK_FEAT_ZONED only after the zone info is known The namespace head is marked zoned at allocation time based only on the command set identifier. If the zone info query reports a zero zone size, the path namespace is registered without zoned limits while the head still advertises the zoned capability with a zone size of zero, and reporting zones or writing to the head then shifts by ilog2(0). Drop the zoned feature from the head allocation and let the head limits refresh stack it in from the path namespace instead.