CVE Feed

In the Linux kernel, the following vulnerability has been resolved: OPP: fix dev_pm_opp_find_bw_*() when bandwidth table not initialized If a driver calls dev_pm_opp_find_bw_ceil/floor() the retrieve bandwidth from the OPP table but the bandwidth table was not created because the interconnect properties were missing in the OPP consumer node, the kernel will crash with: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 ... pc : _read_bw+0x8/0x10 lr : _opp_table_find_key+0x9c/0x174 ... Call trace: _read_bw+0x8/0x10 (P) _opp_table_find_key+0x9c/0x174 (L) _find_key+0x98/0x168 dev_pm_opp_find_bw_ceil+0x50/0x88 ... In order to fix the crash, create an assert function to check if the bandwidth table was created before trying to get a bandwidth with _read_bw().

In the Linux kernel, the following vulnerability has been resolved: tomoyo: don't emit warning in tomoyo_write_control() syzbot is reporting too large allocation warning at tomoyo_write_control(), for one can write a very very long line without new line character. To fix this warning, I use __GFP_NOWARN rather than checking for KMALLOC_MAX_SIZE, for practically a valid line should be always shorter than 32KB where the "too small to fail" memory-allocation rule applies. One might try to write a valid line that is longer than 32KB, but such request will likely fail with -ENOMEM. Therefore, I feel that separately returning -EINVAL when a line is longer than KMALLOC_MAX_SIZE is redundant. There is no need to distinguish over-32KB and over-KMALLOC_MAX_SIZE.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtlwifi: remove unused check_buddy_priv Commit 2461c7d60f9f ("rtlwifi: Update header file") introduced a global list of private data structures. Later on, commit 26634c4b1868 ("rtlwifi Modify existing bits to match vendor version 2013.02.07") started adding the private data to that list at probe time and added a hook, check_buddy_priv to find the private data from a similar device. However, that function was never used. Besides, though there is a lock for that list, it is never used. And when the probe fails, the private data is never removed from the list. This would cause a second probe to access freed memory. Remove the unused hook, structures and members, which will prevent the potential race condition on the list and its corruption during a second probe when probe fails.

In the Linux kernel, the following vulnerability has been resolved: team: prevent adding a device which is already a team device lower Prevent adding a device which is already a team device lower, e.g. adding veth0 if vlan1 was already added and veth0 is a lower of vlan1. This is not useful in practice and can lead to recursive locking: $ ip link add veth0 type veth peer name veth1 $ ip link set veth0 up $ ip link set veth1 up $ ip link add link veth0 name veth0.1 type vlan protocol 802.1Q id 1 $ ip link add team0 type team $ ip link set veth0.1 down $ ip link set veth0.1 master team0 team0: Port device veth0.1 added $ ip link set veth0 down $ ip link set veth0 master team0 ============================================ WARNING: possible recursive locking detected 6.13.0-rc2-virtme-00441-ga14a429069bb #46 Not tainted -------------------------------------------- ip/7684 is trying to acquire lock: ffff888016848e00 (team->team_lock_key){+.+.}-{4:4}, at: team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973) but task is already holding lock: ffff888016848e00 (team->team_lock_key){+.+.}-{4:4}, at: team_add_slave (drivers/net/team/team_core.c:1147 drivers/net/team/team_core.c:1977) other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(team->team_lock_key); lock(team->team_lock_key); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by ip/7684: stack backtrace: CPU: 3 UID: 0 PID: 7684 Comm: ip Not tainted 6.13.0-rc2-virtme-00441-ga14a429069bb #46 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:122) print_deadlock_bug.cold (kernel/locking/lockdep.c:3040) __lock_acquire (kernel/locking/lockdep.c:3893 kernel/locking/lockdep.c:5226) ? netlink_broadcast_filtered (net/netlink/af_netlink.c:1548) lock_acquire.part.0 (kernel/locking/lockdep.c:467 kernel/locking/lockdep.c:5851) ? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973) ? trace_lock_acquire (./include/trace/events/lock.h:24 (discriminator 2)) ? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973) ? lock_acquire (kernel/locking/lockdep.c:5822) ? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973) __mutex_lock (kernel/locking/mutex.c:587 kernel/locking/mutex.c:735) ? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973) ? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973) ? fib_sync_up (net/ipv4/fib_semantics.c:2167) ? team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973) team_device_event (drivers/net/team/team_core.c:2928 drivers/net/team/team_core.c:2951 drivers/net/team/team_core.c:2973) notifier_call_chain (kernel/notifier.c:85) call_netdevice_notifiers_info (net/core/dev.c:1996) __dev_notify_flags (net/core/dev.c:8993) ? __dev_change_flags (net/core/dev.c:8975) dev_change_flags (net/core/dev.c:9027) vlan_device_event (net/8021q/vlan.c:85 net/8021q/vlan.c:470) ? br_device_event (net/bridge/br.c:143) notifier_call_chain (kernel/notifier.c:85) call_netdevice_notifiers_info (net/core/dev.c:1996) dev_open (net/core/dev.c:1519 net/core/dev.c:1505) team_add_slave (drivers/net/team/team_core.c:1219 drivers/net/team/team_core.c:1977) ? __pfx_team_add_slave (drivers/net/team/team_core.c:1972) do_set_master (net/core/rtnetlink.c:2917) do_setlink.isra.0 (net/core/rtnetlink.c:3117)

In the Linux kernel, the following vulnerability has been resolved: wifi: rtlwifi: fix memory leaks and invalid access at probe error path Deinitialize at reverse order when probe fails. When init_sw_vars fails, rtl_deinit_core should not be called, specially now that it destroys the rtl_wq workqueue. And call rtl_pci_deinit and deinit_sw_vars, otherwise, memory will be leaked. Remove pci_set_drvdata call as it will already be cleaned up by the core driver code and could lead to memory leaks too. cf. commit 8d450935ae7f ("wireless: rtlwifi: remove unnecessary pci_set_drvdata()") and commit 3d86b93064c7 ("rtlwifi: Fix PCI probe error path orphaned memory").

In the Linux kernel, the following vulnerability has been resolved: ubifs: skip dumping tnc tree when zroot is null Clearing slab cache will free all znode in memory and make c->zroot.znode = NULL, then dumping tnc tree will access c->zroot.znode which cause null pointer dereference.

Buffalo LS520D 4.53 is vulnerable to Arbitrary file read, which allows unauthenticated attackers to access the NAS web UI and read arbitrary internal files.

crmeb CRMEB-KY v5.4.0 and before has a SQL Injection vulnerability at getRead() in /system/SystemDatabackupServices.php

An issue in account management interface in Netsweeper Server v.8.2.6 and earlier (fixed in v.8.2.7) allows unauthorized changes to the "Account Owner" field due to client-side-only restrictions and a lack of server-side validation. This vulnerability enables account ownership reassignment to or away from any user.

An issue in TAAGSOLUTIONS GmbH MyTaag v.2024-11-24 and before allows a remote attacker to escalate privileges via the "/user" endpoint

An issue was discovered in NRMM in Samsung Mobile Processor, Wearable Processor, and Modem Exynos 9820, 9825, 980, 990, 850, 1080, 2100, 1280, 2200, 1330, 1380, 1480, 2400, 9110, W920, W930, W1000, Modem 5123, Modem 5300, and Modem 5400. Lack of a boundary check during the decoding of DL NAS Transport messages leads to a Denial of Service.

In the Linux kernel, the following vulnerability has been resolved: bpf: Reject struct_ops registration that uses module ptr and the module btf_id is missing There is a UAF report in the bpf_struct_ops when CONFIG_MODULES=n. In particular, the report is on tcp_congestion_ops that has a "struct module *owner" member. For struct_ops that has a "struct module *owner" member, it can be extended either by the regular kernel module or by the bpf_struct_ops. bpf_try_module_get() will be used to do the refcounting and different refcount is done based on the owner pointer. When CONFIG_MODULES=n, the btf_id of the "struct module" is missing: WARN: resolve_btfids: unresolved symbol module Thus, the bpf_try_module_get() cannot do the correct refcounting. Not all subsystem's struct_ops requires the "struct module *owner" member. e.g. the recent sched_ext_ops. This patch is to disable bpf_struct_ops registration if the struct_ops has the "struct module *" member and the "struct module" btf_id is missing. The btf_type_is_fwd() helper is moved to the btf.h header file for this test. This has happened since the beginning of bpf_struct_ops which has gone through many changes. The Fixes tag is set to a recent commit that this patch can apply cleanly. Considering CONFIG_MODULES=n is not common and the age of the issue, targeting for bpf-next also.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: avoid NULL pointer dereference When iterating over the links of a vif, we need to make sure that the pointer is valid (in other words - that the link exists) before dereferncing it. Use for_each_vif_active_link that also does the check.

In the Linux kernel, the following vulnerability has been resolved: clk: qcom: dispcc-sm6350: Add missing parent_map for a clock If a clk_rcg2 has a parent, it should also have parent_map defined, otherwise we'll get a NULL pointer dereference when calling clk_set_rate like the following: [ 3.388105] Call trace: [ 3.390664] qcom_find_src_index+0x3c/0x70 (P) [ 3.395301] qcom_find_src_index+0x1c/0x70 (L) [ 3.399934] _freq_tbl_determine_rate+0x48/0x100 [ 3.404753] clk_rcg2_determine_rate+0x1c/0x28 [ 3.409387] clk_core_determine_round_nolock+0x58/0xe4 [ 3.421414] clk_core_round_rate_nolock+0x48/0xfc [ 3.432974] clk_core_round_rate_nolock+0xd0/0xfc [ 3.444483] clk_core_set_rate_nolock+0x8c/0x300 [ 3.455886] clk_set_rate+0x38/0x14c Add the parent_map property for the clock where it's missing and also un-inline the parent_data as well to keep the matching parent_map and parent_data together.

In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: scm: Fix missing read barrier in qcom_scm_get_tzmem_pool() Commit 2e4955167ec5 ("firmware: qcom: scm: Fix __scm and waitq completion variable initialization") introduced a write barrier in probe function to store global '__scm' variable. We all known barriers are paired (see memory-barriers.txt: "Note that write barriers should normally be paired with read or address-dependency barriers"), therefore accessing it from concurrent contexts requires read barrier. Previous commit added such barrier in qcom_scm_is_available(), so let's use that directly. Lack of this read barrier can result in fetching stale '__scm' variable value, NULL, and dereferencing it. Note that barrier in qcom_scm_is_available() satisfies here the control dependency.

In the Linux kernel, the following vulnerability has been resolved: staging: media: max96712: fix kernel oops when removing module The following kernel oops is thrown when trying to remove the max96712 module: Unable to handle kernel paging request at virtual address 00007375746174db Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=000000010af89000 [00007375746174db] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP Modules linked in: crct10dif_ce polyval_ce mxc_jpeg_encdec flexcan snd_soc_fsl_sai snd_soc_fsl_asoc_card snd_soc_fsl_micfil dwc_mipi_csi2 imx_csi_formatter polyval_generic v4l2_jpeg imx_pcm_dma can_dev snd_soc_imx_audmux snd_soc_wm8962 snd_soc_imx_card snd_soc_fsl_utils max96712(C-) rpmsg_ctrl rpmsg_char pwm_fan fuse [last unloaded: imx8_isi] CPU: 0 UID: 0 PID: 754 Comm: rmmod Tainted: G C 6.12.0-rc6-06364-g327fec852c31 #17 Tainted: [C]=CRAP Hardware name: NXP i.MX95 19X19 board (DT) pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : led_put+0x1c/0x40 lr : v4l2_subdev_put_privacy_led+0x48/0x58 sp : ffff80008699bbb0 x29: ffff80008699bbb0 x28: ffff00008ac233c0 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 x23: ffff000080cf1170 x22: ffff00008b53bd00 x21: ffff8000822ad1c8 x20: ffff000080ff5c00 x19: ffff00008b53be40 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000004 x13: ffff0000800f8010 x12: 0000000000000000 x11: ffff000082acf5c0 x10: ffff000082acf478 x9 : ffff0000800f8010 x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : fefefeff6364626d x5 : 8080808000000000 x4 : 0000000000000020 x3 : 00000000553a3dc1 x2 : ffff00008ac233c0 x1 : ffff00008ac233c0 x0 : ff00737574617473 Call trace: led_put+0x1c/0x40 v4l2_subdev_put_privacy_led+0x48/0x58 v4l2_async_unregister_subdev+0x2c/0x1a4 max96712_remove+0x1c/0x38 [max96712] i2c_device_remove+0x2c/0x9c device_remove+0x4c/0x80 device_release_driver_internal+0x1cc/0x228 driver_detach+0x4c/0x98 bus_remove_driver+0x6c/0xbc driver_unregister+0x30/0x60 i2c_del_driver+0x54/0x64 max96712_i2c_driver_exit+0x18/0x1d0 [max96712] __arm64_sys_delete_module+0x1a4/0x290 invoke_syscall+0x48/0x10c el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xd8 el0t_64_sync_handler+0x120/0x12c el0t_64_sync+0x190/0x194 Code: f9000bf3 aa0003f3 f9402800 f9402000 (f9403400) ---[ end trace 0000000000000000 ]--- This happens because in v4l2_i2c_subdev_init(), the i2c_set_cliendata() is called again and the data is overwritten to point to sd, instead of priv. So, in remove(), the wrong pointer is passed to v4l2_async_unregister_subdev(), leading to a crash.

In the Linux kernel, the following vulnerability has been resolved: remoteproc: core: Fix ida_free call while not allocated In the rproc_alloc() function, on error, put_device(&rproc->dev) is called, leading to the call of the rproc_type_release() function. An error can occurs before ida_alloc is called. In such case in rproc_type_release(), the condition (rproc->index >= 0) is true as rproc->index has been initialized to 0. ida_free() is called reporting a warning: [ 4.181906] WARNING: CPU: 1 PID: 24 at lib/idr.c:525 ida_free+0x100/0x164 [ 4.186378] stm32-display-dsi 5a000000.dsi: Fixed dependency cycle(s) with /soc/dsi@5a000000/panel@0 [ 4.188854] ida_free called for id=0 which is not allocated. [ 4.198256] mipi-dsi 5a000000.dsi.0: Fixed dependency cycle(s) with /soc/dsi@5a000000 [ 4.203556] Modules linked in: panel_orisetech_otm8009a dw_mipi_dsi_stm(+) gpu_sched dw_mipi_dsi stm32_rproc stm32_crc32 stm32_ipcc(+) optee(+) [ 4.224307] CPU: 1 UID: 0 PID: 24 Comm: kworker/u10:0 Not tainted 6.12.0 #442 [ 4.231481] Hardware name: STM32 (Device Tree Support) [ 4.236627] Workqueue: events_unbound deferred_probe_work_func [ 4.242504] Call trace: [ 4.242522] unwind_backtrace from show_stack+0x10/0x14 [ 4.250218] show_stack from dump_stack_lvl+0x50/0x64 [ 4.255274] dump_stack_lvl from __warn+0x80/0x12c [ 4.260134] __warn from warn_slowpath_fmt+0x114/0x188 [ 4.265199] warn_slowpath_fmt from ida_free+0x100/0x164 [ 4.270565] ida_free from rproc_type_release+0x38/0x60 [ 4.275832] rproc_type_release from device_release+0x30/0xa0 [ 4.281601] device_release from kobject_put+0xc4/0x294 [ 4.286762] kobject_put from rproc_alloc.part.0+0x208/0x28c [ 4.292430] rproc_alloc.part.0 from devm_rproc_alloc+0x80/0xc4 [ 4.298393] devm_rproc_alloc from stm32_rproc_probe+0xd0/0x844 [stm32_rproc] [ 4.305575] stm32_rproc_probe [stm32_rproc] from platform_probe+0x5c/0xbc Calling ida_alloc earlier in rproc_alloc ensures that the rproc->index is properly set.

In the Linux kernel, the following vulnerability has been resolved: PCI: Avoid putting some root ports into D3 on TUXEDO Sirius Gen1 commit 9d26d3a8f1b0 ("PCI: Put PCIe ports into D3 during suspend") sets the policy that all PCIe ports are allowed to use D3. When the system is suspended if the port is not power manageable by the platform and won't be used for wakeup via a PME this sets up the policy for these ports to go into D3hot. This policy generally makes sense from an OSPM perspective but it leads to problems with wakeup from suspend on the TUXEDO Sirius 16 Gen 1 with a specific old BIOS. This manifests as a system hang. On the affected Device + BIOS combination, add a quirk for the root port of the problematic controller to ensure that these root ports are not put into D3hot at suspend. This patch is based on https://lore.kernel.org/linux-pci/[email protected] but with the added condition both in the documentation and in the code to apply only to the TUXEDO Sirius 16 Gen 1 with a specific old BIOS and only the affected root ports.

In the Linux kernel, the following vulnerability has been resolved: seccomp: passthrough uretprobe systemcall without filtering When attaching uretprobes to processes running inside docker, the attached process is segfaulted when encountering the retprobe. The reason is that now that uretprobe is a system call the default seccomp filters in docker block it as they only allow a specific set of known syscalls. This is true for other userspace applications which use seccomp to control their syscall surface. Since uretprobe is a "kernel implementation detail" system call which is not used by userspace application code directly, it is impractical and there's very little point in forcing all userspace applications to explicitly allow it in order to avoid crashing tracked processes. Pass this systemcall through seccomp without depending on configuration. Note: uretprobe is currently only x86_64 and isn't expected to ever be supported in i386. [kees: minimized changes for easier backporting, tweaked commit log]

An issue in TAAGSOLUTIONS GmbH MyTaag v.2024-11-24 and before allows a physically proximate attacker to escalate privileges via the "2fa_authorized" Local Storage key

In the Linux kernel, the following vulnerability has been resolved: drm/i915: Grab intel_display from the encoder to avoid potential oopsies Grab the intel_display from 'encoder' rather than 'state' in the encoder hooks to avoid the massive footgun that is intel_sanitize_encoder(), which passes NULL as the 'state' argument to encoder .disable() and .post_disable(). TODO: figure out how to actually fix intel_sanitize_encoder()...

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: check dpu_plane_atomic_print_state() for valid sspp Similar to the r_pipe sspp protect, add a check to protect the pipe state prints to avoid NULL ptr dereference for cases when the state is dumped without a corresponding atomic_check() where the pipe->sspp is assigned. Patchwork: https://patchwork.freedesktop.org/patch/628404/

In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Fix deadlock during uvc_probe If uvc_probe() fails, it can end up calling uvc_status_unregister() before uvc_status_init() is called. Fix this by checking if dev->status is NULL or not in uvc_status_unregister().

In the Linux kernel, the following vulnerability has been resolved: clk: mmp: pxa1908-apbc: Fix NULL vs IS_ERR() check The devm_kzalloc() function returns NULL on error, not error pointers. Fix the check.

In the Linux kernel, the following vulnerability has been resolved: rtc: pcf85063: fix potential OOB write in PCF85063 NVMEM read The nvmem interface supports variable buffer sizes, while the regmap interface operates with fixed-size storage. If an nvmem client uses a buffer size less than 4 bytes, regmap_read will write out of bounds as it expects the buffer to point at an unsigned int. Fix this by using an intermediary unsigned int to hold the value.

An issue was discovered in Django 5.1 before 5.1.7, 5.0 before 5.0.13, and 4.2 before 4.2.20. The django.utils.text.wrap() method and wordwrap template filter are subject to a potential denial-of-service attack when used with very long strings.

In the Linux kernel, the following vulnerability has been resolved: ipmi: ipmb: Add check devm_kasprintf() returned value devm_kasprintf() can return a NULL pointer on failure but this returned value is not checked.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_tcm: Don't free command immediately Don't prematurely free the command. Wait for the status completion of the sense status. It can be freed then. Otherwise we will double-free the command.

In the Linux kernel, the following vulnerability has been resolved: clk: qcom: gcc-sm6350: Add missing parent_map for two clocks If a clk_rcg2 has a parent, it should also have parent_map defined, otherwise we'll get a NULL pointer dereference when calling clk_set_rate like the following: [ 3.388105] Call trace: [ 3.390664] qcom_find_src_index+0x3c/0x70 (P) [ 3.395301] qcom_find_src_index+0x1c/0x70 (L) [ 3.399934] _freq_tbl_determine_rate+0x48/0x100 [ 3.404753] clk_rcg2_determine_rate+0x1c/0x28 [ 3.409387] clk_core_determine_round_nolock+0x58/0xe4 [ 3.421414] clk_core_round_rate_nolock+0x48/0xfc [ 3.432974] clk_core_round_rate_nolock+0xd0/0xfc [ 3.444483] clk_core_set_rate_nolock+0x8c/0x300 [ 3.455886] clk_set_rate+0x38/0x14c Add the parent_map property for two clocks where it's missing and also un-inline the parent_data as well to keep the matching parent_map and parent_data together.

In the Linux kernel, the following vulnerability has been resolved: ASoC: soc-pcm: don't use soc_pcm_ret() on .prepare callback commit 1f5664351410 ("ASoC: lower "no backend DAIs enabled for ... Port" log severity") ignores -EINVAL error message on common soc_pcm_ret(). It is used from many functions, ignoring -EINVAL is over-kill. The reason why -EINVAL was ignored was it really should only be used upon invalid parameters coming from userspace and in that case we don't want to log an error since we do not want to give userspace a way to do a denial-of-service attack on the syslog / diskspace. So don't use soc_pcm_ret() on .prepare callback is better idea.

A SQL Injection vulnerability has been identified in EPICOR Prophet 21 (P21) up to 23.2.5232. This vulnerability allows authenticated remote attackers to execute arbitrary SQL commands through unsanitized user input fields to obtain unauthorized information

An issue was discovered in Samsung Mobile Processor and Wearable Processor Exynos 980, 850, 1080, 1280, 1330, 1380, 1480, W920, W930, and W1000. Lack of a boundary check in STOP_KEEP_ALIVE_OFFLOAD leads to out-of-bounds access. An attacker can send a malformed message to the target through the Wi-Fi driver.

An issue was discovered in NRMM in Samsung Mobile Processor, Wearable Processor, and Modem Exynos 9820, 9825, 980, 990, 850, 1080, 2100, 1280, 2200, 1330, 1380, 1480, 2400, 9110, W920, W930, W1000, Modem 5123, Modem 5300, and Modem 5400. Lack of boundary check during the decoding of Registration Accept messages can lead to out-of-bounds writes on the stack

The pairing API request handler in Microsoft HoloLens 1 (Windows Holographic) through 10.0.17763.3046 and HoloLens 2 (Windows Holographic) through 10.0.22621.1244 allows remote attackers to cause a Denial of Service (resource consumption and device unusability) by sending many requests through the Device Portal framework.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix potential NULL pointer dereference in atomctrl_get_smc_sclk_range_table The function atomctrl_get_smc_sclk_range_table() does not check the return value of smu_atom_get_data_table(). If smu_atom_get_data_table() fails to retrieve SMU_Info table, it returns NULL which is later dereferenced. Found by Linux Verification Center (linuxtesting.org) with SVACE. In practice this should never happen as this code only gets called on polaris chips and the vbios data table will always be present on those chips.

In the Linux kernel, the following vulnerability has been resolved: idpf: convert workqueues to unbound When a workqueue is created with `WQ_UNBOUND`, its work items are served by special worker-pools, whose host workers are not bound to any specific CPU. In the default configuration (i.e. when `queue_delayed_work` and friends do not specify which CPU to run the work item on), `WQ_UNBOUND` allows the work item to be executed on any CPU in the same node of the CPU it was enqueued on. While this solution potentially sacrifices locality, it avoids contention with other processes that might dominate the CPU time of the processor the work item was scheduled on. This is not just a theoretical problem: in a particular scenario misconfigured process was hogging most of the time from CPU0, leaving less than 0.5% of its CPU time to the kworker. The IDPF workqueues that were using the kworker on CPU0 suffered large completion delays as a result, causing performance degradation, timeouts and eventual system crash. * I have also run a manual test to gauge the performance improvement. The test consists of an antagonist process (`./stress --cpu 2`) consuming as much of CPU 0 as possible. This process is run under `taskset 01` to bind it to CPU0, and its priority is changed with `chrt -pQ 9900 10000 ${pid}` and `renice -n -20 ${pid}` after start. Then, the IDPF driver is forced to prefer CPU0 by editing all calls to `queue_delayed_work`, `mod_delayed_work`, etc... to use CPU 0. Finally, `ktraces` for the workqueue events are collected. Without the current patch, the antagonist process can force arbitrary delays between `workqueue_queue_work` and `workqueue_execute_start`, that in my tests were as high as `30ms`. With the current patch applied, the workqueue can be migrated to another unloaded CPU in the same node, and, keeping everything else equal, the maximum delay I could see was `6us`.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: prohibit deactivating all links In the internal API this calls this is a WARN_ON, but that should remain since internally we want to know about bugs that may cause this. Prevent deactivating all links in the debugfs write directly.

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: tests: Fix potential NULL dereference in test_cfg80211_parse_colocated_ap() kunit_kzalloc() may return NULL, dereferencing it without NULL check may lead to NULL dereference. Add a NULL check for ies.

In the Linux kernel, the following vulnerability has been resolved: clk: mmp: pxa1908-apbcp: Fix a NULL vs IS_ERR() check The devm_kzalloc() function doesn't return error pointers, it returns NULL on error. Update the check to match.

In the Linux kernel, the following vulnerability has been resolved: clk: mmp: pxa1908-mpmu: Fix a NULL vs IS_ERR() check The devm_kzalloc() function returns NULL on error, not error pointers. Update the check to match.

In the Linux kernel, the following vulnerability has been resolved: misc: misc_minor_alloc to use ida for all dynamic/misc dynamic minors misc_minor_alloc was allocating id using ida for minor only in case of MISC_DYNAMIC_MINOR but misc_minor_free was always freeing ids using ida_free causing a mismatch and following warn: > > WARNING: CPU: 0 PID: 159 at lib/idr.c:525 ida_free+0x3e0/0x41f > > ida_free called for id=127 which is not allocated. > > <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< ... > > [<60941eb4>] ida_free+0x3e0/0x41f > > [<605ac993>] misc_minor_free+0x3e/0xbc > > [<605acb82>] misc_deregister+0x171/0x1b3 misc_minor_alloc is changed to allocate id from ida for all minors falling in the range of dynamic/ misc dynamic minors

In the Linux kernel, the following vulnerability has been resolved: media: nuvoton: Fix an error check in npcm_video_ece_init() When function of_find_device_by_node() fails, it returns NULL instead of an error code. So the corresponding error check logic should be modified to check whether the return value is NULL and set the error code to be returned as -ENODEV.

In the Linux kernel, the following vulnerability has been resolved: KVM: Explicitly verify target vCPU is online in kvm_get_vcpu() Explicitly verify the target vCPU is fully online _prior_ to clamping the index in kvm_get_vcpu(). If the index is "bad", the nospec clamping will generate '0', i.e. KVM will return vCPU0 instead of NULL. In practice, the bug is unlikely to cause problems, as it will only come into play if userspace or the guest is buggy or misbehaving, e.g. KVM may send interrupts to vCPU0 instead of dropping them on the floor. However, returning vCPU0 when it shouldn't exist per online_vcpus is problematic now that KVM uses an xarray for the vCPUs array, as KVM needs to insert into the xarray before publishing the vCPU to userspace (see commit c5b077549136 ("KVM: Convert the kvm->vcpus array to a xarray")), i.e. before vCPU creation is guaranteed to succeed. As a result, incorrectly providing access to vCPU0 will trigger a use-after-free if vCPU0 is dereferenced and kvm_vm_ioctl_create_vcpu() bails out of vCPU creation due to an error and frees vCPU0. Commit afb2acb2e3a3 ("KVM: Fix vcpu_array[0] races") papered over that issue, but in doing so introduced an unsolvable teardown conundrum. Preventing accesses to vCPU0 before it's fully online will allow reverting commit afb2acb2e3a3, without re-introducing the vcpu_array[0] UAF race.

In the Linux kernel, the following vulnerability has been resolved: clk: mmp2: call pm_genpd_init() only after genpd.name is set Setting the genpd's struct device's name with dev_set_name() is happening within pm_genpd_init(). If it remains NULL, things can blow up later, such as when crafting the devfs hierarchy for the power domain: Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read ... Call trace: strlen from start_creating+0x90/0x138 start_creating from debugfs_create_dir+0x20/0x178 debugfs_create_dir from genpd_debug_add.part.0+0x4c/0x144 genpd_debug_add.part.0 from genpd_debug_init+0x74/0x90 genpd_debug_init from do_one_initcall+0x5c/0x244 do_one_initcall from kernel_init_freeable+0x19c/0x1f4 kernel_init_freeable from kernel_init+0x1c/0x12c kernel_init from ret_from_fork+0x14/0x28 Bisecting tracks this crash back to commit 899f44531fe6 ("pmdomain: core: Add GENPD_FLAG_DEV_NAME_FW flag"), which exchanges use of genpd->name with dev_name(&genpd->dev) in genpd_debug_add.part().

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't flush non-uploaded STAs If STA state is pre-moved to AUTHORIZED (such as in IBSS scenarios) and insertion fails, the station is freed. In this case, the driver never knew about the station, so trying to flush it is unexpected and may crash. Check if the sta was uploaded to the driver before and fix this.

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Avoid use of NULL after WARN_ON_ONCE There is a WARN_ON_ONCE to catch an unlikely situation when domain_remove_dev_pasid can't find the `pasid`. In case it nevertheless happens we must avoid using a NULL pointer.

An arbitrary file upload vulnerability in the component /cms/CmsWebFileAdminController.java of PublicCMS v4.0.202406 allows attackers to execute arbitrary code via uploading a crafted svg or xml file.

Incorrect access control in the KSRTC AWATAR app of Karnataka State Road Transport Corporation v1.3.0 allows to view sensitive information such as usernames and passwords.

An issue in TAAGSOLUTIONS GmbH MyTaag v.2024-11-24 and before allows a remote attacker to escalate privileges via the deactivation of the activated second factor to the /session endpoint

A cross-site request forgery (CSRF) vulnerability in Jenkins 2.499 and earlier, LTS 2.492.1 and earlier allows attackers to have users toggle their collapsed/expanded status of sidepanel widgets (e.g., Build Queue and Build Executor Status widgets).