CVE Feed

In the Linux kernel, the following vulnerability has been resolved: memstick/mspro_block: fix handling of read-only devices Use set_disk_ro to propagate the read-only state to the block layer instead of checking for it in ->open and leaking a reference in case of a read-only device.

In the Linux kernel, the following vulnerability has been resolved: net: bcmgenet: Use stronger register read/writes to assure ordering GCC12 appears to be much smarter about its dependency tracking and is aware that the relaxed variants are just normal loads and stores and this is causing problems like: [ 210.074549] ------------[ cut here ]------------ [ 210.079223] NETDEV WATCHDOG: enabcm6e4ei0 (bcmgenet): transmit queue 1 timed out [ 210.086717] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:529 dev_watchdog+0x234/0x240 [ 210.095044] Modules linked in: genet(E) nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat] [ 210.146561] ACPI CPPC: PCC check channel failed for ss: 0. ret=-110 [ 210.146927] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G E 5.17.0-rc7G12+ #58 [ 210.153226] CPPC Cpufreq:cppc_scale_freq_workfn: failed to read perf counters [ 210.161349] Hardware name: Raspberry Pi Foundation Raspberry Pi 4 Model B/Raspberry Pi 4 Model B, BIOS EDK2-DEV 02/08/2022 [ 210.161353] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 210.161358] pc : dev_watchdog+0x234/0x240 [ 210.161364] lr : dev_watchdog+0x234/0x240 [ 210.161368] sp : ffff8000080a3a40 [ 210.161370] x29: ffff8000080a3a40 x28: ffffcd425af87000 x27: ffff8000080a3b20 [ 210.205150] x26: ffffcd425aa00000 x25: 0000000000000001 x24: ffffcd425af8ec08 [ 210.212321] x23: 0000000000000100 x22: ffffcd425af87000 x21: ffff55b142688000 [ 210.219491] x20: 0000000000000001 x19: ffff55b1426884c8 x18: ffffffffffffffff [ 210.226661] x17: 64656d6974203120 x16: 0000000000000001 x15: 6d736e617274203a [ 210.233831] x14: 2974656e65676d63 x13: ffffcd4259c300d8 x12: ffffcd425b07d5f0 [ 210.241001] x11: 00000000ffffffff x10: ffffcd425b07d5f0 x9 : ffffcd4258bdad9c [ 210.248171] x8 : 00000000ffffdfff x7 : 000000000000003f x6 : 0000000000000000 [ 210.255341] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000001000 [ 210.262511] x2 : 0000000000001000 x1 : 0000000000000005 x0 : 0000000000000044 [ 210.269682] Call trace: [ 210.272133] dev_watchdog+0x234/0x240 [ 210.275811] call_timer_fn+0x3c/0x15c [ 210.279489] __run_timers.part.0+0x288/0x310 [ 210.283777] run_timer_softirq+0x48/0x80 [ 210.287716] __do_softirq+0x128/0x360 [ 210.291392] __irq_exit_rcu+0x138/0x140 [ 210.295243] irq_exit_rcu+0x1c/0x30 [ 210.298745] el1_interrupt+0x38/0x54 [ 210.302334] el1h_64_irq_handler+0x18/0x24 [ 210.306445] el1h_64_irq+0x7c/0x80 [ 210.309857] arch_cpu_idle+0x18/0x2c [ 210.313445] default_idle_call+0x4c/0x140 [ 210.317470] cpuidle_idle_call+0x14c/0x1a0 [ 210.321584] do_idle+0xb0/0x100 [ 210.324737] cpu_startup_entry+0x30/0x8c [ 210.328675] secondary_start_kernel+0xe4/0x110 [ 210.333138] __secondary_switched+0x94/0x98 The assumption when these were relaxed seems to be that device memory would be mapped non reordering, and that other constructs (spinlocks/etc) would provide the barriers to assure that packet data and in memory rings/queues were ordered with respect to device register reads/writes. This itself seems a bit sketchy, but the real problem with GCC12 is that it is moving the actual reads/writes around at will as though they were independent operations when in truth they are not, but the compiler can't know that. When looking at the assembly dumps for many of these routines its possible to see very clean, but not strictly in program order operations occurring as the compiler would be free to do if these weren't actually register reads/write operations. Its possible to suppress the timeout with a liberal bit of dma_mb()'s sprinkled around but the device still seems unable to reliably send/receive data. A better plan is to use the safer readl/writel everywhere. Since this partially reverts an older commit, which notes the use of the relaxed variants for performance reasons. I would suggest that any performance problems ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix double free during GPU reset on DC streams [Why] The issue only occurs during the GPU reset code path. We first backup the current state prior to commiting 0 streams internally from DM to DC. This state backup contains valid link encoder assignments. DC will clear the link encoder assignments as part of current state (but not the backup, since it was a copied before the commit) and free the extra stream reference it held. DC requires that the link encoder assignments remain cleared/invalid prior to commiting. Since the backup still has valid assignments we call the interface post reset to clear them. This routine also releases the extra reference that the link encoder interface held - resulting in a double free (and eventually a NULL pointer dereference). [How] We'll have to do a full DC commit anyway after GPU reset because the stream count previously went to 0. We don't need to retain the assignment that we had backed up, so just copy off of the now clean current state assignment after the reset has occcurred with the new link_enc_cfg_copy() interface.

In the Linux kernel, the following vulnerability has been resolved: rtw88: fix memory overrun and memory leak during hw_scan Previously we allocated less memory than actual required, overwrite to the buffer causes the mm module to complaint and raise access violation faults. Along with potential memory leaks when returned early. Fix these by passing the correct size and proper deinit flow.

In the Linux kernel, the following vulnerability has been resolved: net: dsa: Avoid cross-chip syncing of VLAN filtering Changes to VLAN filtering are not applicable to cross-chip notifications. On a system like this: .-----. .-----. .-----. | sw1 +---+ sw2 +---+ sw3 | '-1-2-' '-1-2-' '-1-2-' Before this change, upon sw1p1 leaving a bridge, a call to dsa_port_vlan_filtering would also be made to sw2p1 and sw3p1. In this scenario: .---------. .-----. .-----. | sw1 +---+ sw2 +---+ sw3 | '-1-2-3-4-' '-1-2-' '-1-2-' When sw1p4 would leave a bridge, dsa_port_vlan_filtering would be called for sw2 and sw3 with a non-existing port - leading to array out-of-bounds accesses and crashes on mv88e6xxx.

In the Linux kernel, the following vulnerability has been resolved: ath11k: free peer for station when disconnect from AP for QCA6390/WCN6855 Commit b4a0f54156ac ("ath11k: move peer delete after vdev stop of station for QCA6390 and WCN6855") is to fix firmware crash by changing the WMI command sequence, but actually skip all the peer delete operation, then it lead commit 58595c9874c6 ("ath11k: Fixing dangling pointer issue upon peer delete failure") not take effect, and then happened a use-after-free warning from KASAN. because the peer->sta is not set to NULL and then used later. Change to only skip the WMI_PEER_DELETE_CMDID for QCA6390/WCN6855. log of user-after-free: [ 534.888665] BUG: KASAN: use-after-free in ath11k_dp_rx_update_peer_stats+0x912/0xc10 [ath11k] [ 534.888696] Read of size 8 at addr ffff8881396bb1b8 by task rtcwake/2860 [ 534.888705] CPU: 4 PID: 2860 Comm: rtcwake Kdump: loaded Tainted: G W 5.15.0-wt-ath+ #523 [ 534.888712] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0067.2021.0528.1339 05/28/2021 [ 534.888716] Call Trace: [ 534.888720] <IRQ> [ 534.888726] dump_stack_lvl+0x57/0x7d [ 534.888736] print_address_description.constprop.0+0x1f/0x170 [ 534.888745] ? ath11k_dp_rx_update_peer_stats+0x912/0xc10 [ath11k] [ 534.888771] kasan_report.cold+0x83/0xdf [ 534.888783] ? ath11k_dp_rx_update_peer_stats+0x912/0xc10 [ath11k] [ 534.888810] ath11k_dp_rx_update_peer_stats+0x912/0xc10 [ath11k] [ 534.888840] ath11k_dp_rx_process_mon_status+0x529/0xa70 [ath11k] [ 534.888874] ? ath11k_dp_rx_mon_status_bufs_replenish+0x3f0/0x3f0 [ath11k] [ 534.888897] ? check_prev_add+0x20f0/0x20f0 [ 534.888922] ? __lock_acquire+0xb72/0x1870 [ 534.888937] ? find_held_lock+0x33/0x110 [ 534.888954] ath11k_dp_rx_process_mon_rings+0x297/0x520 [ath11k] [ 534.888981] ? rcu_read_unlock+0x40/0x40 [ 534.888990] ? ath11k_dp_rx_pdev_alloc+0xd90/0xd90 [ath11k] [ 534.889026] ath11k_dp_service_mon_ring+0x67/0xe0 [ath11k] [ 534.889053] ? ath11k_dp_rx_process_mon_rings+0x520/0x520 [ath11k] [ 534.889075] call_timer_fn+0x167/0x4a0 [ 534.889084] ? add_timer_on+0x3b0/0x3b0 [ 534.889103] ? lockdep_hardirqs_on_prepare.part.0+0x18c/0x370 [ 534.889117] __run_timers.part.0+0x539/0x8b0 [ 534.889123] ? ath11k_dp_rx_process_mon_rings+0x520/0x520 [ath11k] [ 534.889157] ? call_timer_fn+0x4a0/0x4a0 [ 534.889164] ? mark_lock_irq+0x1c30/0x1c30 [ 534.889173] ? clockevents_program_event+0xdd/0x280 [ 534.889189] ? mark_held_locks+0xa5/0xe0 [ 534.889203] run_timer_softirq+0x97/0x180 [ 534.889213] __do_softirq+0x276/0x86a [ 534.889230] __irq_exit_rcu+0x11c/0x180 [ 534.889238] irq_exit_rcu+0x5/0x20 [ 534.889244] sysvec_apic_timer_interrupt+0x8e/0xc0 [ 534.889251] </IRQ> [ 534.889254] <TASK> [ 534.889259] asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 534.889265] RIP: 0010:_raw_spin_unlock_irqrestore+0x38/0x70 [ 534.889271] Code: 74 24 10 e8 ea c2 bf fd 48 89 ef e8 12 53 c0 fd 81 e3 00 02 00 00 75 25 9c 58 f6 c4 02 75 2d 48 85 db 74 01 fb bf 01 00 00 00 <e8> 13 a7 b5 fd 65 8b 05 cc d9 9c 5e 85 c0 74 0a 5b 5d c3 e8 a0 ee [ 534.889276] RSP: 0018:ffffc90002e5f880 EFLAGS: 00000206 [ 534.889284] RAX: 0000000000000006 RBX: 0000000000000200 RCX: ffffffff9f256f10 [ 534.889289] RDX: 0000000000000000 RSI: ffffffffa1c6e420 RDI: 0000000000000001 [ 534.889293] RBP: ffff8881095e6200 R08: 0000000000000001 R09: ffffffffa40d2b8f [ 534.889298] R10: fffffbfff481a571 R11: 0000000000000001 R12: ffff8881095e6e68 [ 534.889302] R13: ffffc90002e5f908 R14: 0000000000000246 R15: 0000000000000000 [ 534.889316] ? mark_lock+0xd0/0x14a0 [ 534.889332] klist_next+0x1d4/0x450 [ 534.889340] ? dpm_wait_for_subordinate+0x2d0/0x2d0 [ 534.889350] device_for_each_child+0xa8/0x140 [ 534.889360] ? device_remove_class_symlinks+0x1b0/0x1b0 [ 534.889370] ? __lock_release+0x4bd/0x9f0 [ 534.889378] ? dpm_suspend+0x26b/0x3f0 [ 534.889390] dpm_wait_for_subordinate+ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: crypto: hisilicon/sec - fix the aead software fallback for engine Due to the subreq pointer misuse the private context memory. The aead soft crypto occasionally casues the OS panic as setting the 64K page. Here is fix it.

In the Linux kernel, the following vulnerability has been resolved: exec: Force single empty string when argv is empty Quoting[1] Ariadne Conill: "In several other operating systems, it is a hard requirement that the second argument to execve(2) be the name of a program, thus prohibiting a scenario where argc < 1. POSIX 2017 also recommends this behaviour, but it is not an explicit requirement[2]: The argument arg0 should point to a filename string that is associated with the process being started by one of the exec functions. ... Interestingly, Michael Kerrisk opened an issue about this in 2008[3], but there was no consensus to support fixing this issue then. Hopefully now that CVE-2021-4034 shows practical exploitative use[4] of this bug in a shellcode, we can reconsider. This issue is being tracked in the KSPP issue tracker[5]." While the initial code searches[6][7] turned up what appeared to be mostly corner case tests, trying to that just reject argv == NULL (or an immediately terminated pointer list) quickly started tripping[8] existing userspace programs. The next best approach is forcing a single empty string into argv and adjusting argc to match. The number of programs depending on argc == 0 seems a smaller set than those calling execve with a NULL argv. Account for the additional stack space in bprm_stack_limits(). Inject an empty string when argc == 0 (and set argc = 1). Warn about the case so userspace has some notice about the change: process './argc0' launched './argc0' with NULL argv: empty string added Additionally WARN() and reject NULL argv usage for kernel threads. [1] https://lore.kernel.org/lkml/[email protected]/ [2] https://pubs.opengroup.org/onlinepubs/9699919799/functions/exec.html [3] https://bugzilla.kernel.org/show_bug.cgi?id=8408 [4] https://www.qualys.com/2022/01/25/cve-2021-4034/pwnkit.txt [5] https://github.com/KSPP/linux/issues/176 [6] https://codesearch.debian.net/search?q=execve%5C+*%5C%28%5B%5E%2C%5D%2B%2C+*NULL&literal=0 [7] https://codesearch.debian.net/search?q=execlp%3F%5Cs*%5C%28%5B%5E%2C%5D%2B%2C%5Cs*NULL&literal=0 [8] https://lore.kernel.org/lkml/20220131144352.GE16385@xsang-OptiPlex-9020/

In the Linux kernel, the following vulnerability has been resolved: NFSD: prevent underflow in nfssvc_decode_writeargs() Smatch complains: fs/nfsd/nfsxdr.c:341 nfssvc_decode_writeargs() warn: no lower bound on 'args->len' Change the type to unsigned to prevent this issue.

In the Linux kernel, the following vulnerability has been resolved: uaccess: fix integer overflow on access_ok() Three architectures check the end of a user access against the address limit without taking a possible overflow into account. Passing a negative length or another overflow in here returns success when it should not. Use the most common correct implementation here, which optimizes for a constant 'size' argument, and turns the common case into a single comparison.

In the Linux kernel, the following vulnerability has been resolved: nbd: call genl_unregister_family() first in nbd_cleanup() Otherwise there may be race between module removal and the handling of netlink command, which can lead to the oops as shown below: BUG: kernel NULL pointer dereference, address: 0000000000000098 Oops: 0002 [#1] SMP PTI CPU: 1 PID: 31299 Comm: nbd-client Tainted: G E 5.14.0-rc4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:down_write+0x1a/0x50 Call Trace: start_creating+0x89/0x130 debugfs_create_dir+0x1b/0x130 nbd_start_device+0x13d/0x390 [nbd] nbd_genl_connect+0x42f/0x748 [nbd] genl_family_rcv_msg_doit.isra.0+0xec/0x150 genl_rcv_msg+0xe5/0x1e0 netlink_rcv_skb+0x55/0x100 genl_rcv+0x29/0x40 netlink_unicast+0x1a8/0x250 netlink_sendmsg+0x21b/0x430 ____sys_sendmsg+0x2a4/0x2d0 ___sys_sendmsg+0x81/0xc0 __sys_sendmsg+0x62/0xb0 __x64_sys_sendmsg+0x1f/0x30 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae Modules linked in: nbd(E-)

In the Linux kernel, the following vulnerability has been resolved: xprtrdma: treat all calls not a bcall when bc_serv is NULL When a rdma server returns a fault format reply, nfs v3 client may treats it as a bcall when bc service is not exist. The debug message at rpcrdma_bc_receive_call are, [56579.837169] RPC: rpcrdma_bc_receive_call: callback XID 00000001, length=20 [56579.837174] RPC: rpcrdma_bc_receive_call: 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 04 After that, rpcrdma_bc_receive_call will meets NULL pointer as, [ 226.057890] BUG: unable to handle kernel NULL pointer dereference at 00000000000000c8 ... [ 226.058704] RIP: 0010:_raw_spin_lock+0xc/0x20 ... [ 226.059732] Call Trace: [ 226.059878] rpcrdma_bc_receive_call+0x138/0x327 [rpcrdma] [ 226.060011] __ib_process_cq+0x89/0x170 [ib_core] [ 226.060092] ib_cq_poll_work+0x26/0x80 [ib_core] [ 226.060257] process_one_work+0x1a7/0x360 [ 226.060367] ? create_worker+0x1a0/0x1a0 [ 226.060440] worker_thread+0x30/0x390 [ 226.060500] ? create_worker+0x1a0/0x1a0 [ 226.060574] kthread+0x116/0x130 [ 226.060661] ? kthread_flush_work_fn+0x10/0x10 [ 226.060724] ret_from_fork+0x35/0x40 ...

In the Linux kernel, the following vulnerability has been resolved: tcp: add accessors to read/set tp->snd_cwnd We had various bugs over the years with code breaking the assumption that tp->snd_cwnd is greater than zero. Lately, syzbot reported the WARN_ON_ONCE(!tp->prior_cwnd) added in commit 8b8a321ff72c ("tcp: fix zero cwnd in tcp_cwnd_reduction") can trigger, and without a repro we would have to spend considerable time finding the bug. Instead of complaining too late, we want to catch where and when tp->snd_cwnd is set to an illegal value.

In the Linux kernel, the following vulnerability has been resolved: mt76: fix use-after-free by removing a non-RCU wcid pointer Fixes an issue caught by KASAN about use-after-free in mt76_txq_schedule by protecting mtxq->wcid with rcu_lock between mt76_txq_schedule and sta_info_[alloc, free]. [18853.876689] ================================================================== [18853.876751] BUG: KASAN: use-after-free in mt76_txq_schedule+0x204/0xaf8 [mt76] [18853.876773] Read of size 8 at addr ffffffaf989a2138 by task mt76-tx phy0/883 [18853.876786] [18853.876810] CPU: 5 PID: 883 Comm: mt76-tx phy0 Not tainted 5.10.100-fix-510-56778d365941-kasan #5 0b01fbbcf41a530f52043508fec2e31a4215 [18853.876840] Call trace: [18853.876861] dump_backtrace+0x0/0x3ec [18853.876878] show_stack+0x20/0x2c [18853.876899] dump_stack+0x11c/0x1ac [18853.876918] print_address_description+0x74/0x514 [18853.876934] kasan_report+0x134/0x174 [18853.876948] __asan_report_load8_noabort+0x44/0x50 [18853.876976] mt76_txq_schedule+0x204/0xaf8 [mt76 074e03e4640e97fe7405ee1fab547b81c4fa45d2] [18853.877002] mt76_txq_schedule_all+0x2c/0x48 [mt76 074e03e4640e97fe7405ee1fab547b81c4fa45d2] [18853.877030] mt7921_tx_worker+0xa0/0x1cc [mt7921_common f0875ebac9d7b4754e1010549e7db50fbd90a047] [18853.877054] __mt76_worker_fn+0x190/0x22c [mt76 074e03e4640e97fe7405ee1fab547b81c4fa45d2] [18853.877071] kthread+0x2f8/0x3b8 [18853.877087] ret_from_fork+0x10/0x30 [18853.877098] [18853.877112] Allocated by task 941: [18853.877131] kasan_save_stack+0x38/0x68 [18853.877147] __kasan_kmalloc+0xd4/0xfc [18853.877163] kasan_kmalloc+0x10/0x1c [18853.877177] __kmalloc+0x264/0x3c4 [18853.877294] sta_info_alloc+0x460/0xf88 [mac80211] [18853.877410] ieee80211_prep_connection+0x204/0x1ee0 [mac80211] [18853.877523] ieee80211_mgd_auth+0x6c4/0xa4c [mac80211] [18853.877635] ieee80211_auth+0x20/0x2c [mac80211] [18853.877733] rdev_auth+0x7c/0x438 [cfg80211] [18853.877826] cfg80211_mlme_auth+0x26c/0x390 [cfg80211] [18853.877919] nl80211_authenticate+0x6d4/0x904 [cfg80211] [18853.877938] genl_rcv_msg+0x748/0x93c [18853.877954] netlink_rcv_skb+0x160/0x2a8 [18853.877969] genl_rcv+0x3c/0x54 [18853.877985] netlink_unicast_kernel+0x104/0x1ec [18853.877999] netlink_unicast+0x178/0x268 [18853.878015] netlink_sendmsg+0x3cc/0x5f0 [18853.878030] sock_sendmsg+0xb4/0xd8 [18853.878043] ____sys_sendmsg+0x2f8/0x53c [18853.878058] ___sys_sendmsg+0xe8/0x150 [18853.878071] __sys_sendmsg+0xc4/0x1f4 [18853.878087] __arm64_compat_sys_sendmsg+0x88/0x9c [18853.878101] el0_svc_common+0x1b4/0x390 [18853.878115] do_el0_svc_compat+0x8c/0xdc [18853.878131] el0_svc_compat+0x10/0x1c [18853.878146] el0_sync_compat_handler+0xa8/0xcc [18853.878161] el0_sync_compat+0x188/0x1c0 [18853.878171] [18853.878183] Freed by task 10927: [18853.878200] kasan_save_stack+0x38/0x68 [18853.878215] kasan_set_track+0x28/0x3c [18853.878228] kasan_set_free_info+0x24/0x48 [18853.878244] __kasan_slab_free+0x11c/0x154 [18853.878259] kasan_slab_free+0x14/0x24 [18853.878273] slab_free_freelist_hook+0xac/0x1b0 [18853.878287] kfree+0x104/0x390 [18853.878402] sta_info_free+0x198/0x210 [mac80211] [18853.878515] __sta_info_destroy_part2+0x230/0x2d4 [mac80211] [18853.878628] __sta_info_flush+0x300/0x37c [mac80211] [18853.878740] ieee80211_set_disassoc+0x2cc/0xa7c [mac80211] [18853.878851] ieee80211_mgd_deauth+0x4a4/0x10a0 [mac80211] [18853.878962] ieee80211_deauth+0x20/0x2c [mac80211] [18853.879057] rdev_deauth+0x7c/0x438 [cfg80211] [18853.879150] cfg80211_mlme_deauth+0x274/0x414 [cfg80211] [18853.879243] cfg80211_mlme_down+0xe4/0x118 [cfg80211] [18853.879335] cfg80211_disconnect+0x218/0x2d8 [cfg80211] [18853.879427] __cfg80211_leave+0x17c/0x240 [cfg80211] [18853.879519] cfg80211_leave+0x3c/0x58 [cfg80211] [18853.879611] wiphy_suspend+0xdc/0x200 [cfg80211] [18853.879628] dpm_run_callback+0x58/0x408 [18853.879642] __device_suspend+0x4cc/0x864 [18853.879658] async_suspend+0x34/0xf4 [18 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/etnaviv: check for reaped mapping in etnaviv_iommu_unmap_gem When the mapping is already reaped the unmap must be a no-op, as we would otherwise try to remove the mapping twice, corrupting the involved data structures.

In the Linux kernel, the following vulnerability has been resolved: ext4: avoid cycles in directory h-tree A maliciously corrupted filesystem can contain cycles in the h-tree stored inside a directory. That can easily lead to the kernel corrupting tree nodes that were already verified under its hands while doing a node split and consequently accessing unallocated memory. Fix the problem by verifying traversed block numbers are unique.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix use-after-free in ext4_rename_dir_prepare We got issue as follows: EXT4-fs (loop0): mounted filesystem without journal. Opts: ,errors=continue ext4_get_first_dir_block: bh->b_data=0xffff88810bee6000 len=34478 ext4_get_first_dir_block: *parent_de=0xffff88810beee6ae bh->b_data=0xffff88810bee6000 ext4_rename_dir_prepare: [1] parent_de=0xffff88810beee6ae ================================================================== BUG: KASAN: use-after-free in ext4_rename_dir_prepare+0x152/0x220 Read of size 4 at addr ffff88810beee6ae by task rep/1895 CPU: 13 PID: 1895 Comm: rep Not tainted 5.10.0+ #241 Call Trace: dump_stack+0xbe/0xf9 print_address_description.constprop.0+0x1e/0x220 kasan_report.cold+0x37/0x7f ext4_rename_dir_prepare+0x152/0x220 ext4_rename+0xf44/0x1ad0 ext4_rename2+0x11c/0x170 vfs_rename+0xa84/0x1440 do_renameat2+0x683/0x8f0 __x64_sys_renameat+0x53/0x60 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f45a6fc41c9 RSP: 002b:00007ffc5a470218 EFLAGS: 00000246 ORIG_RAX: 0000000000000108 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f45a6fc41c9 RDX: 0000000000000005 RSI: 0000000020000180 RDI: 0000000000000005 RBP: 00007ffc5a470240 R08: 00007ffc5a470160 R09: 0000000020000080 R10: 00000000200001c0 R11: 0000000000000246 R12: 0000000000400bb0 R13: 00007ffc5a470320 R14: 0000000000000000 R15: 0000000000000000 The buggy address belongs to the page: page:00000000440015ce refcount:0 mapcount:0 mapping:0000000000000000 index:0x1 pfn:0x10beee flags: 0x200000000000000() raw: 0200000000000000 ffffea00043ff4c8 ffffea0004325608 0000000000000000 raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88810beee580: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff88810beee600: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff88810beee680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff88810beee700: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff88810beee780: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== Disabling lock debugging due to kernel taint ext4_rename_dir_prepare: [2] parent_de->inode=3537895424 ext4_rename_dir_prepare: [3] dir=0xffff888124170140 ext4_rename_dir_prepare: [4] ino=2 ext4_rename_dir_prepare: ent->dir->i_ino=2 parent=-757071872 Reason is first directory entry which 'rec_len' is 34478, then will get illegal parent entry. Now, we do not check directory entry after read directory block in 'ext4_get_first_dir_block'. To solve this issue, check directory entry in 'ext4_get_first_dir_block'. [ Trigger an ext4_error() instead of just warning if the directory is missing a '.' or '..' entry. Also make sure we return an error code if the file system is corrupted. -TYT ]

In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Trap RDMA segment overflows Prevent svc_rdma_build_writes() from walking off the end of a Write chunk's segment array. Caught with KASAN. The test that this fix replaces is invalid, and might have been left over from an earlier prototype of the PCL work.

In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix potential use-after-free in nfsd_file_put() nfsd_file_put_noref() can free @nf, so don't dereference @nf immediately upon return from nfsd_file_put_noref().

In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: fix list iterator in fastrpc_req_mem_unmap_impl This is another instance of incorrect use of list iterator and checking it for NULL. The list iterator value 'map' will *always* be set and non-NULL by list_for_each_entry(), so it is incorrect to assume that the iterator value will be NULL if the list is empty (in this case, the check 'if (!map) {' will always be false and never exit as expected). To fix the bug, use a new variable 'iter' as the list iterator, while use the original variable 'map' as a dedicated pointer to point to the found element. Without this patch, Kernel crashes with below trace: Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000ffff7fb03750 ... Call trace: fastrpc_map_create+0x70/0x290 [fastrpc] fastrpc_req_mem_map+0xf0/0x2dc [fastrpc] fastrpc_device_ioctl+0x138/0xc60 [fastrpc] __arm64_sys_ioctl+0xa8/0xec invoke_syscall+0x48/0x114 el0_svc_common.constprop.0+0xd4/0xfc do_el0_svc+0x28/0x90 el0_svc+0x3c/0x130 el0t_64_sync_handler+0xa4/0x130 el0t_64_sync+0x18c/0x190 Code: 14000016 f94000a5 eb05029f 54000260 (b94018a6) ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: staging: r8188eu: prevent ->Ssid overflow in rtw_wx_set_scan() This code has a check to prevent read overflow but it needs another check to prevent writing beyond the end of the ->Ssid[] array.

In the Linux kernel, the following vulnerability has been resolved: dlm: fix plock invalid read This patch fixes an invalid read showed by KASAN. A unlock will allocate a "struct plock_op" and a followed send_op() will append it to a global send_list data structure. In some cases a followed dev_read() moves it to recv_list and dev_write() will cast it to "struct plock_xop" and access fields which are only available in those structures. At this point an invalid read happens by accessing those fields. To fix this issue the "callback" field is moved to "struct plock_op" to indicate that a cast to "plock_xop" is allowed and does the additional "plock_xop" handling if set. Example of the KASAN output which showed the invalid read: [ 2064.296453] ================================================================== [ 2064.304852] BUG: KASAN: slab-out-of-bounds in dev_write+0x52b/0x5a0 [dlm] [ 2064.306491] Read of size 8 at addr ffff88800ef227d8 by task dlm_controld/7484 [ 2064.308168] [ 2064.308575] CPU: 0 PID: 7484 Comm: dlm_controld Kdump: loaded Not tainted 5.14.0+ #9 [ 2064.310292] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 2064.311618] Call Trace: [ 2064.312218] dump_stack_lvl+0x56/0x7b [ 2064.313150] print_address_description.constprop.8+0x21/0x150 [ 2064.314578] ? dev_write+0x52b/0x5a0 [dlm] [ 2064.315610] ? dev_write+0x52b/0x5a0 [dlm] [ 2064.316595] kasan_report.cold.14+0x7f/0x11b [ 2064.317674] ? dev_write+0x52b/0x5a0 [dlm] [ 2064.318687] dev_write+0x52b/0x5a0 [dlm] [ 2064.319629] ? dev_read+0x4a0/0x4a0 [dlm] [ 2064.320713] ? bpf_lsm_kernfs_init_security+0x10/0x10 [ 2064.321926] vfs_write+0x17e/0x930 [ 2064.322769] ? __fget_light+0x1aa/0x220 [ 2064.323753] ksys_write+0xf1/0x1c0 [ 2064.324548] ? __ia32_sys_read+0xb0/0xb0 [ 2064.325464] do_syscall_64+0x3a/0x80 [ 2064.326387] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 2064.327606] RIP: 0033:0x7f807e4ba96f [ 2064.328470] Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 39 87 f8 ff 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 7c 87 f8 ff 48 [ 2064.332902] RSP: 002b:00007ffd50cfe6e0 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 [ 2064.334658] RAX: ffffffffffffffda RBX: 000055cc3886eb30 RCX: 00007f807e4ba96f [ 2064.336275] RDX: 0000000000000040 RSI: 00007ffd50cfe7e0 RDI: 0000000000000010 [ 2064.337980] RBP: 00007ffd50cfe7e0 R08: 0000000000000000 R09: 0000000000000001 [ 2064.339560] R10: 000055cc3886eb30 R11: 0000000000000293 R12: 000055cc3886eb80 [ 2064.341237] R13: 000055cc3886eb00 R14: 000055cc3886f590 R15: 0000000000000001 [ 2064.342857] [ 2064.343226] Allocated by task 12438: [ 2064.344057] kasan_save_stack+0x1c/0x40 [ 2064.345079] __kasan_kmalloc+0x84/0xa0 [ 2064.345933] kmem_cache_alloc_trace+0x13b/0x220 [ 2064.346953] dlm_posix_unlock+0xec/0x720 [dlm] [ 2064.348811] do_lock_file_wait.part.32+0xca/0x1d0 [ 2064.351070] fcntl_setlk+0x281/0xbc0 [ 2064.352879] do_fcntl+0x5e4/0xfe0 [ 2064.354657] __x64_sys_fcntl+0x11f/0x170 [ 2064.356550] do_syscall_64+0x3a/0x80 [ 2064.358259] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 2064.360745] [ 2064.361511] Last potentially related work creation: [ 2064.363957] kasan_save_stack+0x1c/0x40 [ 2064.365811] __kasan_record_aux_stack+0xaf/0xc0 [ 2064.368100] call_rcu+0x11b/0xf70 [ 2064.369785] dlm_process_incoming_buffer+0x47d/0xfd0 [dlm] [ 2064.372404] receive_from_sock+0x290/0x770 [dlm] [ 2064.374607] process_recv_sockets+0x32/0x40 [dlm] [ 2064.377290] process_one_work+0x9a8/0x16e0 [ 2064.379357] worker_thread+0x87/0xbf0 [ 2064.381188] kthread+0x3ac/0x490 [ 2064.383460] ret_from_fork+0x22/0x30 [ 2064.385588] [ 2064.386518] Second to last potentially related work creation: [ 2064.389219] kasan_save_stack+0x1c/0x40 [ 2064.391043] __kasan_record_aux_stack+0xaf/0xc0 [ 2064.393303] call_rcu+0x11b/0xf70 [ 2064.394885] dlm_process_incoming_buffer+0x47d/0xfd0 [dlm] [ 2064.397694] receive_from_sock+0x290/0x770 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix use-after-free in chanctx code In ieee80211_vif_use_reserved_context(), when we have an old context and the new context's replace_state is set to IEEE80211_CHANCTX_REPLACE_NONE, we free the old context in ieee80211_vif_use_reserved_reassign(). Therefore, we cannot check the old_ctx anymore, so we should set it to NULL after this point. However, since the new_ctx replace state is clearly not IEEE80211_CHANCTX_REPLACES_OTHER, we're not going to do anything else in this function and can just return to avoid accessing the freed old_ctx.

In the Linux kernel, the following vulnerability has been resolved: NFSv4: Fix free of uninitialized nfs4_label on referral lookup. Send along the already-allocated fattr along with nfs4_fs_locations, and drop the memcpy of fattr. We end up growing two more allocations, but this fixes up a crash as: PID: 790 TASK: ffff88811b43c000 CPU: 0 COMMAND: "ls" #0 [ffffc90000857920] panic at ffffffff81b9bfde #1 [ffffc900008579c0] do_trap at ffffffff81023a9b #2 [ffffc90000857a10] do_error_trap at ffffffff81023b78 #3 [ffffc90000857a58] exc_stack_segment at ffffffff81be1f45 #4 [ffffc90000857a80] asm_exc_stack_segment at ffffffff81c009de #5 [ffffc90000857b08] nfs_lookup at ffffffffa0302322 [nfs] #6 [ffffc90000857b70] __lookup_slow at ffffffff813a4a5f #7 [ffffc90000857c60] walk_component at ffffffff813a86c4 #8 [ffffc90000857cb8] path_lookupat at ffffffff813a9553 #9 [ffffc90000857cf0] filename_lookup at ffffffff813ab86b

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix dereference of stale list iterator after loop body The list iterator variable will be a bogus pointer if no break was hit. Dereferencing it (cur->page in this case) could load an out-of-bounds/undefined value making it unsafe to use that in the comparision to determine if the specific element was found. Since 'cur->page' *can* be out-ouf-bounds it cannot be guaranteed that by chance (or intention of an attacker) it matches the value of 'page' even though the correct element was not found. This is fixed by using a separate list iterator variable for the loop and only setting the original variable if a suitable element was found. Then determing if the element was found is simply checking if the variable is set.

In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix list protocols enumeration in the base protocol While enumerating protocols implemented by the SCMI platform using BASE_DISCOVER_LIST_PROTOCOLS, the number of returned protocols is currently validated in an improper way since the check employs a sum between unsigned integers that could overflow and cause the check itself to be silently bypassed if the returned value 'loop_num_ret' is big enough. Fix the validation avoiding the addition.

In the Linux kernel, the following vulnerability has been resolved: dpaa2-eth: retrieve the virtual address before dma_unmap The TSO header was DMA unmapped before the virtual address was retrieved and then used to free the buffer. This meant that we were actually removing the DMA map and then trying to search for it to help in retrieving the virtual address. This lead to a invalid virtual address being used in the kfree call. Fix this by calling dpaa2_iova_to_virt() prior to the dma_unmap call. [ 487.231819] Unable to handle kernel paging request at virtual address fffffd9807000008 (...) [ 487.354061] Hardware name: SolidRun LX2160A Honeycomb (DT) [ 487.359535] pstate: a0400005 (NzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 487.366485] pc : kfree+0xac/0x304 [ 487.369799] lr : kfree+0x204/0x304 [ 487.373191] sp : ffff80000c4eb120 [ 487.376493] x29: ffff80000c4eb120 x28: ffff662240c46400 x27: 0000000000000001 [ 487.383621] x26: 0000000000000001 x25: ffff662246da0cc0 x24: ffff66224af78000 [ 487.390748] x23: ffffad184f4ce008 x22: ffffad1850185000 x21: ffffad1838d13cec [ 487.397874] x20: ffff6601c0000000 x19: fffffd9807000000 x18: 0000000000000000 [ 487.405000] x17: ffffb910cdc49000 x16: ffffad184d7d9080 x15: 0000000000004000 [ 487.412126] x14: 0000000000000008 x13: 000000000000ffff x12: 0000000000000000 [ 487.419252] x11: 0000000000000004 x10: 0000000000000001 x9 : ffffad184d7d927c [ 487.426379] x8 : 0000000000000000 x7 : 0000000ffffffd1d x6 : ffff662240a94900 [ 487.433505] x5 : 0000000000000003 x4 : 0000000000000009 x3 : ffffad184f4ce008 [ 487.440632] x2 : ffff662243eec000 x1 : 0000000100000100 x0 : fffffc0000000000 [ 487.447758] Call trace: [ 487.450194] kfree+0xac/0x304 [ 487.453151] dpaa2_eth_free_tx_fd.isra.0+0x33c/0x3e0 [fsl_dpaa2_eth] [ 487.459507] dpaa2_eth_tx_conf+0x100/0x2e0 [fsl_dpaa2_eth] [ 487.464989] dpaa2_eth_poll+0xdc/0x380 [fsl_dpaa2_eth]

In the Linux kernel, the following vulnerability has been resolved: bonding: fix missed rcu protection When removing the rcu_read_lock in bond_ethtool_get_ts_info() as discussed [1], I didn't notice it could be called via setsockopt, which doesn't hold rcu lock, as syzbot pointed: stack backtrace: CPU: 0 PID: 3599 Comm: syz-executor317 Not tainted 5.18.0-rc5-syzkaller-01392-g01f4685797a5 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 bond_option_active_slave_get_rcu include/net/bonding.h:353 [inline] bond_ethtool_get_ts_info+0x32c/0x3a0 drivers/net/bonding/bond_main.c:5595 __ethtool_get_ts_info+0x173/0x240 net/ethtool/common.c:554 ethtool_get_phc_vclocks+0x99/0x110 net/ethtool/common.c:568 sock_timestamping_bind_phc net/core/sock.c:869 [inline] sock_set_timestamping+0x3a3/0x7e0 net/core/sock.c:916 sock_setsockopt+0x543/0x2ec0 net/core/sock.c:1221 __sys_setsockopt+0x55e/0x6a0 net/socket.c:2223 __do_sys_setsockopt net/socket.c:2238 [inline] __se_sys_setsockopt net/socket.c:2235 [inline] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2235 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f8902c8eb39 Fix it by adding rcu_read_lock and take a ref on the real_dev. Since dev_hold() and dev_put() can take NULL these days, we can skip checking if real_dev exist. [1] https://lore.kernel.org/netdev/27565.1642742439@famine/

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btmtksdio: fix use-after-free at btmtksdio_recv_event We should not access skb buffer data anymore after hci_recv_frame was called. [ 39.634809] BUG: KASAN: use-after-free in btmtksdio_recv_event+0x1b0 [ 39.634855] Read of size 1 at addr ffffff80cf28a60d by task kworker [ 39.634962] Call trace: [ 39.634974] dump_backtrace+0x0/0x3b8 [ 39.634999] show_stack+0x20/0x2c [ 39.635016] dump_stack_lvl+0x60/0x78 [ 39.635040] print_address_description+0x70/0x2f0 [ 39.635062] kasan_report+0x154/0x194 [ 39.635079] __asan_report_load1_noabort+0x44/0x50 [ 39.635099] btmtksdio_recv_event+0x1b0/0x1c4 [ 39.635129] btmtksdio_txrx_work+0x6cc/0xac4 [ 39.635157] process_one_work+0x560/0xc5c [ 39.635177] worker_thread+0x7ec/0xcc0 [ 39.635195] kthread+0x2d0/0x3d0 [ 39.635215] ret_from_fork+0x10/0x20 [ 39.635247] Allocated by task 0: [ 39.635260] (stack is not available) [ 39.635281] Freed by task 2392: [ 39.635295] kasan_save_stack+0x38/0x68 [ 39.635319] kasan_set_track+0x28/0x3c [ 39.635338] kasan_set_free_info+0x28/0x4c [ 39.635357] ____kasan_slab_free+0x104/0x150 [ 39.635374] __kasan_slab_free+0x18/0x28 [ 39.635391] slab_free_freelist_hook+0x114/0x248 [ 39.635410] kfree+0xf8/0x2b4 [ 39.635427] skb_free_head+0x58/0x98 [ 39.635447] skb_release_data+0x2f4/0x410 [ 39.635464] skb_release_all+0x50/0x60 [ 39.635481] kfree_skb+0xc8/0x25c [ 39.635498] hci_event_packet+0x894/0xca4 [bluetooth] [ 39.635721] hci_rx_work+0x1c8/0x68c [bluetooth] [ 39.635925] process_one_work+0x560/0xc5c [ 39.635951] worker_thread+0x7ec/0xcc0 [ 39.635970] kthread+0x2d0/0x3d0 [ 39.635990] ret_from_fork+0x10/0x20 [ 39.636021] The buggy address belongs to the object at ffffff80cf28a600 which belongs to the cache kmalloc-512 of size 512 [ 39.636039] The buggy address is located 13 bytes inside of 512-byte region [ffffff80cf28a600, ffffff80cf28a800)

In the Linux kernel, the following vulnerability has been resolved: rtw89: cfo: check mac_id to avoid out-of-bounds Somehow, hardware reports incorrect mac_id and pollute memory. Check index before we access the array. UBSAN: array-index-out-of-bounds in rtw89/phy.c:2517:23 index 188 is out of range for type 's32 [64]' CPU: 1 PID: 51550 Comm: irq/35-rtw89_pc Tainted: G OE Call Trace: <IRQ> show_stack+0x52/0x58 dump_stack_lvl+0x4c/0x63 dump_stack+0x10/0x12 ubsan_epilogue+0x9/0x45 __ubsan_handle_out_of_bounds.cold+0x44/0x49 ? __alloc_skb+0x92/0x1d0 rtw89_phy_cfo_parse+0x44/0x7f [rtw89_core] rtw89_core_rx+0x261/0x871 [rtw89_core] ? __alloc_skb+0xee/0x1d0 rtw89_pci_napi_poll+0x3fa/0x4ea [rtw89_pci] __napi_poll+0x33/0x1a0 net_rx_action+0x126/0x260 ? __queue_work+0x217/0x4c0 __do_softirq+0xd9/0x315 ? disable_irq_nosync+0x10/0x10 do_softirq.part.0+0x6d/0x90 </IRQ> <TASK> __local_bh_enable_ip+0x62/0x70 rtw89_pci_interrupt_threadfn+0x182/0x1a6 [rtw89_pci] irq_thread_fn+0x28/0x60 irq_thread+0xc8/0x190 ? irq_thread_fn+0x60/0x60 kthread+0x16b/0x190 ? irq_thread_check_affinity+0xe0/0xe0 ? set_kthread_struct+0x50/0x50 ret_from_fork+0x22/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: mt76: fix tx status related use-after-free race on station removal There is a small race window where ongoing tx activity can lead to a skb getting added to the status tracking idr after that idr has already been cleaned up, which will keep the wcid linked in the status poll list. Fix this by only adding status skbs if the wcid pointer is still assigned in dev->wcid, which gets cleared early by mt76_sta_pre_rcu_remove

In the Linux kernel, the following vulnerability has been resolved: wl1251: dynamically allocate memory used for DMA With introduction of vmap'ed stacks, stack parameters can no longer be used for DMA and now leads to kernel panic. It happens at several places for the wl1251 (e.g. when accessed through SDIO) making it unuseable on e.g. the OpenPandora. We solve this by allocating temporary buffers or use wl1251_read32(). Tested on v5.18-rc5 with OpenPandora.

In the Linux kernel, the following vulnerability has been resolved: fbdev: defio: fix the pagelist corruption Easily hit the below list corruption: == list_add corruption. prev->next should be next (ffffffffc0ceb090), but was ffffec604507edc8. (prev=ffffec604507edc8). WARNING: CPU: 65 PID: 3959 at lib/list_debug.c:26 __list_add_valid+0x53/0x80 CPU: 65 PID: 3959 Comm: fbdev Tainted: G U RIP: 0010:__list_add_valid+0x53/0x80 Call Trace: <TASK> fb_deferred_io_mkwrite+0xea/0x150 do_page_mkwrite+0x57/0xc0 do_wp_page+0x278/0x2f0 __handle_mm_fault+0xdc2/0x1590 handle_mm_fault+0xdd/0x2c0 do_user_addr_fault+0x1d3/0x650 exc_page_fault+0x77/0x180 ? asm_exc_page_fault+0x8/0x30 asm_exc_page_fault+0x1e/0x30 RIP: 0033:0x7fd98fc8fad1 == Figure out the race happens when one process is adding &page->lru into the pagelist tail in fb_deferred_io_mkwrite(), another process is re-initializing the same &page->lru in fb_deferred_io_fault(), which is not protected by the lock. This fix is to init all the page lists one time during initialization, it not only fixes the list corruption, but also avoids INIT_LIST_HEAD() redundantly. V2: change "int i" to "unsigned int i" (Geert Uytterhoeven)

In the Linux kernel, the following vulnerability has been resolved: ath10k: skip ath10k_halt during suspend for driver state RESTARTING Double free crash is observed when FW recovery(caused by wmi timeout/crash) is followed by immediate suspend event. The FW recovery is triggered by ath10k_core_restart() which calls driver clean up via ath10k_halt(). When the suspend event occurs between the FW recovery, the restart worker thread is put into frozen state until suspend completes. The suspend event triggers ath10k_stop() which again triggers ath10k_halt() The double invocation of ath10k_halt() causes ath10k_htt_rx_free() to be called twice(Note: ath10k_htt_rx_alloc was not called by restart worker thread because of its frozen state), causing the crash. To fix this, during the suspend flow, skip call to ath10k_halt() in ath10k_stop() when the current driver state is ATH10K_STATE_RESTARTING. Also, for driver state ATH10K_STATE_RESTARTING, call ath10k_wait_for_suspend() in ath10k_stop(). This is because call to ath10k_wait_for_suspend() is skipped later in [ath10k_halt() > ath10k_core_stop()] for the driver state ATH10K_STATE_RESTARTING. The frozen restart worker thread will be cancelled during resume when the device comes out of suspend. Below is the crash stack for reference: [ 428.469167] ------------[ cut here ]------------ [ 428.469180] kernel BUG at mm/slub.c:4150! [ 428.469193] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 428.469219] Workqueue: events_unbound async_run_entry_fn [ 428.469230] RIP: 0010:kfree+0x319/0x31b [ 428.469241] RSP: 0018:ffffa1fac015fc30 EFLAGS: 00010246 [ 428.469247] RAX: ffffedb10419d108 RBX: ffff8c05262b0000 [ 428.469252] RDX: ffff8c04a8c07000 RSI: 0000000000000000 [ 428.469256] RBP: ffffa1fac015fc78 R08: 0000000000000000 [ 428.469276] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 428.469285] Call Trace: [ 428.469295] ? dma_free_attrs+0x5f/0x7d [ 428.469320] ath10k_core_stop+0x5b/0x6f [ 428.469336] ath10k_halt+0x126/0x177 [ 428.469352] ath10k_stop+0x41/0x7e [ 428.469387] drv_stop+0x88/0x10e [ 428.469410] __ieee80211_suspend+0x297/0x411 [ 428.469441] rdev_suspend+0x6e/0xd0 [ 428.469462] wiphy_suspend+0xb1/0x105 [ 428.469483] ? name_show+0x2d/0x2d [ 428.469490] dpm_run_callback+0x8c/0x126 [ 428.469511] ? name_show+0x2d/0x2d [ 428.469517] __device_suspend+0x2e7/0x41b [ 428.469523] async_suspend+0x1f/0x93 [ 428.469529] async_run_entry_fn+0x3d/0xd1 [ 428.469535] process_one_work+0x1b1/0x329 [ 428.469541] worker_thread+0x213/0x372 [ 428.469547] kthread+0x150/0x15f [ 428.469552] ? pr_cont_work+0x58/0x58 [ 428.469558] ? kthread_blkcg+0x31/0x31 Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00288-QCARMSWPZ-1

In the Linux kernel, the following vulnerability has been resolved: loop: implement ->free_disk Ensure that the lo_device which is stored in the gendisk private data is valid until the gendisk is freed. Currently the loop driver uses a lot of effort to make sure a device is not freed when it is still in use, but to to fix a potential deadlock this will be relaxed a bit soon.

In the Linux kernel, the following vulnerability has been resolved: ath11k: Change max no of active probe SSID and BSSID to fw capability The maximum number of SSIDs in a for active probe requests is currently reported as 16 (WLAN_SCAN_PARAMS_MAX_SSID) when registering the driver. The scan_req_params structure only has the capacity to hold 10 SSIDs. This leads to a buffer overflow which can be triggered from wpa_supplicant in userspace. When copying the SSIDs into the scan_req_params structure in the ath11k_mac_op_hw_scan route, it can overwrite the extraie pointer. Firmware supports 16 ssid * 4 bssid, for each ssid 4 bssid combo probe request will be sent, so totally 64 probe requests supported. So set both max ssid and bssid to 16 and 4 respectively. Remove the redundant macros of ssid and bssid. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01300-QCAHKSWPL_SILICONZ-1

In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix null pointer dereference after failing to issue FLOGI and PLOGI If lpfc_issue_els_flogi() fails and returns non-zero status, the node reference count is decremented to trigger the release of the nodelist structure. However, if there is a prior registration or dev-loss-evt work pending, the node may be released prematurely. When dev-loss-evt completes, the released node is referenced causing a use-after-free null pointer dereference. Similarly, when processing non-zero ELS PLOGI completion status in lpfc_cmpl_els_plogi(), the ndlp flags are checked for a transport registration before triggering node removal. If dev-loss-evt work is pending, the node may be released prematurely and a subsequent call to lpfc_dev_loss_tmo_handler() results in a use after free ndlp dereference. Add test for pending dev-loss before decrementing the node reference count for FLOGI, PLOGI, PRLI, and ADISC handling.

In the Linux kernel, the following vulnerability has been resolved: net: preserve skb_end_offset() in skb_unclone_keeptruesize() syzbot found another way to trigger the infamous WARN_ON_ONCE(delta < len) in skb_try_coalesce() [1] I was able to root cause the issue to kfence. When kfence is in action, the following assertion is no longer true: int size = xxxx; void *ptr1 = kmalloc(size, gfp); void *ptr2 = kmalloc(size, gfp); if (ptr1 && ptr2) ASSERT(ksize(ptr1) == ksize(ptr2)); We attempted to fix these issues in the blamed commits, but forgot that TCP was possibly shifting data after skb_unclone_keeptruesize() has been used, notably from tcp_retrans_try_collapse(). So we not only need to keep same skb->truesize value, we also need to make sure TCP wont fill new tailroom that pskb_expand_head() was able to get from a addr = kmalloc(...) followed by ksize(addr) Split skb_unclone_keeptruesize() into two parts: 1) Inline skb_unclone_keeptruesize() for the common case, when skb is not cloned. 2) Out of line __skb_unclone_keeptruesize() for the 'slow path'. WARNING: CPU: 1 PID: 6490 at net/core/skbuff.c:5295 skb_try_coalesce+0x1235/0x1560 net/core/skbuff.c:5295 Modules linked in: CPU: 1 PID: 6490 Comm: syz-executor161 Not tainted 5.17.0-rc4-syzkaller-00229-g4f12b742eb2b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:skb_try_coalesce+0x1235/0x1560 net/core/skbuff.c:5295 Code: bf 01 00 00 00 0f b7 c0 89 c6 89 44 24 20 e8 62 24 4e fa 8b 44 24 20 83 e8 01 0f 85 e5 f0 ff ff e9 87 f4 ff ff e8 cb 20 4e fa <0f> 0b e9 06 f9 ff ff e8 af b2 95 fa e9 69 f0 ff ff e8 95 b2 95 fa RSP: 0018:ffffc900063af268 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 00000000ffffffd5 RCX: 0000000000000000 RDX: ffff88806fc05700 RSI: ffffffff872abd55 RDI: 0000000000000003 RBP: ffff88806e675500 R08: 00000000ffffffd5 R09: 0000000000000000 R10: ffffffff872ab659 R11: 0000000000000000 R12: ffff88806dd554e8 R13: ffff88806dd9bac0 R14: ffff88806dd9a2c0 R15: 0000000000000155 FS: 00007f18014f9700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020002000 CR3: 000000006be7a000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tcp_try_coalesce net/ipv4/tcp_input.c:4651 [inline] tcp_try_coalesce+0x393/0x920 net/ipv4/tcp_input.c:4630 tcp_queue_rcv+0x8a/0x6e0 net/ipv4/tcp_input.c:4914 tcp_data_queue+0x11fd/0x4bb0 net/ipv4/tcp_input.c:5025 tcp_rcv_established+0x81e/0x1ff0 net/ipv4/tcp_input.c:5947 tcp_v4_do_rcv+0x65e/0x980 net/ipv4/tcp_ipv4.c:1719 sk_backlog_rcv include/net/sock.h:1037 [inline] __release_sock+0x134/0x3b0 net/core/sock.c:2779 release_sock+0x54/0x1b0 net/core/sock.c:3311 sk_wait_data+0x177/0x450 net/core/sock.c:2821 tcp_recvmsg_locked+0xe28/0x1fd0 net/ipv4/tcp.c:2457 tcp_recvmsg+0x137/0x610 net/ipv4/tcp.c:2572 inet_recvmsg+0x11b/0x5e0 net/ipv4/af_inet.c:850 sock_recvmsg_nosec net/socket.c:948 [inline] sock_recvmsg net/socket.c:966 [inline] sock_recvmsg net/socket.c:962 [inline] ____sys_recvmsg+0x2c4/0x600 net/socket.c:2632 ___sys_recvmsg+0x127/0x200 net/socket.c:2674 __sys_recvmsg+0xe2/0x1a0 net/socket.c:2704 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: Ignore multiple conn complete events When one of the three connection complete events is received multiple times for the same handle, the device is registered multiple times which leads to memory corruptions. Therefore, consequent events for a single connection are ignored. The conn->state can hold different values, therefore HCI_CONN_HANDLE_UNSET is introduced to identify new connections. To make sure the events do not contain this or another invalid handle HCI_CONN_HANDLE_MAX and checks are introduced. Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=215497

In the Linux kernel, the following vulnerability has been resolved: ref_tracker: implement use-after-free detection Whenever ref_tracker_dir_init() is called, mark the struct ref_tracker_dir as dead. Test the dead status from ref_tracker_alloc() and ref_tracker_free() This should detect buggy dev_put()/dev_hold() happening too late in netdevice dismantle process.

In the Linux kernel, the following vulnerability has been resolved: scsi: libfc: Fix use after free in fc_exch_abts_resp() fc_exch_release(ep) will decrease the ep's reference count. When the reference count reaches zero, it is freed. But ep is still used in the following code, which will lead to a use after free. Return after the fc_exch_release() call to avoid use after free.

In the Linux kernel, the following vulnerability has been resolved: watch_queue: Actually free the watch free_watch() does everything barring actually freeing the watch object. Fix this by adding the missing kfree. kmemleak produces a report something like the following. Note that as an address can be seen in the first word, the watch would appear to have gone through call_rcu(). BUG: memory leak unreferenced object 0xffff88810ce4a200 (size 96): comm "syz-executor352", pid 3605, jiffies 4294947473 (age 13.720s) hex dump (first 32 bytes): e0 82 48 0d 81 88 ff ff 00 00 00 00 00 00 00 00 ..H............. 80 a2 e4 0c 81 88 ff ff 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff8214e6cc>] kmalloc include/linux/slab.h:581 [inline] [<ffffffff8214e6cc>] kzalloc include/linux/slab.h:714 [inline] [<ffffffff8214e6cc>] keyctl_watch_key+0xec/0x2e0 security/keys/keyctl.c:1800 [<ffffffff8214ec84>] __do_sys_keyctl+0x3c4/0x490 security/keys/keyctl.c:2016 [<ffffffff84493a25>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff84493a25>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 [<ffffffff84600068>] entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: watch_queue: Fix NULL dereference in error cleanup In watch_queue_set_size(), the error cleanup code doesn't take account of the fact that __free_page() can't handle a NULL pointer when trying to free up buffer pages that did get allocated. Fix this by only calling __free_page() on the pages actually allocated. Without the fix, this can lead to something like the following: BUG: KASAN: null-ptr-deref in __free_pages+0x1f/0x1b0 mm/page_alloc.c:5473 Read of size 4 at addr 0000000000000034 by task syz-executor168/3599 ... Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 __kasan_report mm/kasan/report.c:446 [inline] kasan_report.cold+0x66/0xdf mm/kasan/report.c:459 check_region_inline mm/kasan/generic.c:183 [inline] kasan_check_range+0x13d/0x180 mm/kasan/generic.c:189 instrument_atomic_read include/linux/instrumented.h:71 [inline] atomic_read include/linux/atomic/atomic-instrumented.h:27 [inline] page_ref_count include/linux/page_ref.h:67 [inline] put_page_testzero include/linux/mm.h:717 [inline] __free_pages+0x1f/0x1b0 mm/page_alloc.c:5473 watch_queue_set_size+0x499/0x630 kernel/watch_queue.c:275 pipe_ioctl+0xac/0x2b0 fs/pipe.c:632 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae

In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Fix races among concurrent prealloc proc writes We have no protection against concurrent PCM buffer preallocation changes via proc files, and it may potentially lead to UAF or some weird problem. This patch applies the PCM open_mutex to the proc write operation for avoiding the racy proc writes and the PCM stream open (and further operations).

In the Linux kernel, the following vulnerability has been resolved: mac80211: fix potential double free on mesh join While commit 6a01afcf8468 ("mac80211: mesh: Free ie data when leaving mesh") fixed a memory leak on mesh leave / teardown it introduced a potential memory corruption caused by a double free when rejoining the mesh: ieee80211_leave_mesh() -> kfree(sdata->u.mesh.ie); ... ieee80211_join_mesh() -> copy_mesh_setup() -> old_ie = ifmsh->ie; -> kfree(old_ie); This double free / kernel panics can be reproduced by using wpa_supplicant with an encrypted mesh (if set up without encryption via "iw" then ifmsh->ie is always NULL, which avoids this issue). And then calling: $ iw dev mesh0 mesh leave $ iw dev mesh0 mesh join my-mesh Note that typically these commands are not used / working when using wpa_supplicant. And it seems that wpa_supplicant or wpa_cli are going through a NETDEV_DOWN/NETDEV_UP cycle between a mesh leave and mesh join where the NETDEV_UP resets the mesh.ie to NULL via a memcpy of default_mesh_setup in cfg80211_netdev_notifier_call, which then avoids the memory corruption, too. The issue was first observed in an application which was not using wpa_supplicant but "Senf" instead, which implements its own calls to nl80211. Fixing the issue by removing the kfree()'ing of the mesh IE in the mesh join function and leaving it solely up to the mesh leave to free the mesh IE.

In the Linux kernel, the following vulnerability has been resolved: drivers: staging: rtl8723bs: Fix deadlock in rtw_surveydone_event_callback() There is a deadlock in rtw_surveydone_event_callback(), which is shown below: (Thread 1) | (Thread 2) | _set_timer() rtw_surveydone_event_callback()| mod_timer() spin_lock_bh() //(1) | (wait a time) ... | rtw_scan_timeout_handler() del_timer_sync() | spin_lock_bh() //(2) (wait timer to stop) | ... We hold pmlmepriv->lock in position (1) of thread 1 and use del_timer_sync() to wait timer to stop, but timer handler also need pmlmepriv->lock in position (2) of thread 2. As a result, rtw_surveydone_event_callback() will block forever. This patch extracts del_timer_sync() from the protection of spin_lock_bh(), which could let timer handler to obtain the needed lock. What`s more, we change spin_lock_bh() in rtw_scan_timeout_handler() to spin_lock_irq(). Otherwise, spin_lock_bh() will also cause deadlock() in timer handler.

This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

In the Linux kernel, the following vulnerability has been resolved: nbd: fix race between nbd_alloc_config() and module removal When nbd module is being removing, nbd_alloc_config() may be called concurrently by nbd_genl_connect(), although try_module_get() will return false, but nbd_alloc_config() doesn't handle it. The race may lead to the leak of nbd_config and its related resources (e.g, recv_workq) and oops in nbd_read_stat() due to the unload of nbd module as shown below: BUG: kernel NULL pointer dereference, address: 0000000000000040 Oops: 0000 [#1] SMP PTI CPU: 5 PID: 13840 Comm: kworker/u17:33 Not tainted 5.14.0+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) Workqueue: knbd16-recv recv_work [nbd] RIP: 0010:nbd_read_stat.cold+0x130/0x1a4 [nbd] Call Trace: recv_work+0x3b/0xb0 [nbd] process_one_work+0x1ed/0x390 worker_thread+0x4a/0x3d0 kthread+0x12a/0x150 ret_from_fork+0x22/0x30 Fixing it by checking the return value of try_module_get() in nbd_alloc_config(). As nbd_alloc_config() may return ERR_PTR(-ENODEV), assign nbd->config only when nbd_alloc_config() succeeds to ensure the value of nbd->config is binary (valid or NULL). Also adding a debug message to check the reference counter of nbd_config during module removal.

In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: host: Stop setting the ACPI companion It is no longer needed. The sysdev pointer is now used when assigning the ACPI companions to the xHCI ports and USB devices. Assigning the ACPI companion here resulted in the fwnode->secondary pointer to be replaced also for the parent dwc3 device since the primary fwnode (the ACPI companion) was shared. That was unintentional and it created potential side effects like resource leaks.

In the Linux kernel, the following vulnerability has been resolved: tty: goldfish: Use tty_port_destroy() to destroy port In goldfish_tty_probe(), the port initialized through tty_port_init() should be destroyed in error paths.In goldfish_tty_remove(), qtty->port also should be destroyed or else might leak resources. Fix the above by calling tty_port_destroy().