CVE Feed

In the Linux kernel, the following vulnerability has been resolved: netlink: terminate outstanding dump on socket close Netlink supports iterative dumping of data. It provides the families the following ops: - start - (optional) kicks off the dumping process - dump - actual dump helper, keeps getting called until it returns 0 - done - (optional) pairs with .start, can be used for cleanup The whole process is asynchronous and the repeated calls to .dump don't actually happen in a tight loop, but rather are triggered in response to recvmsg() on the socket. This gives the user full control over the dump, but also means that the user can close the socket without getting to the end of the dump. To make sure .start is always paired with .done we check if there is an ongoing dump before freeing the socket, and if so call .done. The complication is that sockets can get freed from BH and .done is allowed to sleep. So we use a workqueue to defer the call, when needed. Unfortunately this does not work correctly. What we defer is not the cleanup but rather releasing a reference on the socket. We have no guarantee that we own the last reference, if someone else holds the socket they may release it in BH and we're back to square one. The whole dance, however, appears to be unnecessary. Only the user can interact with dumps, so we can clean up when socket is closed. And close always happens in process context. Some async code may still access the socket after close, queue notification skbs to it etc. but no dumps can start, end or otherwise make progress. Delete the workqueue and flush the dump state directly from the release handler. Note that further cleanup is possible in -next, for instance we now always call .done before releasing the main module reference, so dump doesn't have to take a reference of its own.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Handle dml allocation failure to avoid crash [Why] In the case where a dml allocation fails for any reason, the current state's dml contexts would no longer be valid. Then subsequent calls dc_state_copy_internal would shallow copy invalid memory and if the new state was released, a double free would occur. [How] Reset dml pointers in new_state to NULL and avoid invalid pointer (cherry picked from commit bcafdc61529a48f6f06355d78eb41b3aeda5296c)

The GriceMobile com.grice.call application 4.5.2 for Android enables any installed application (with no permissions) to place phone calls without user interaction by sending a crafted intent via the com.iui.mobile.presentation.MobileActivity.

An issue in INOVANCE AM401_CPU1608TPTN allows a remote attacker to execute arbitrary code via the ExecuteUserProgramUpgrade function

In the Linux kernel, the following vulnerability has been resolved: drm/rockchip: vop: Fix a dereferenced before check warning The 'state' can't be NULL, we should check crtc_state. Fix warning: drivers/gpu/drm/rockchip/rockchip_drm_vop.c:1096 vop_plane_atomic_async_check() warn: variable dereferenced before check 'state' (see line 1077)

In the Linux kernel, the following vulnerability has been resolved: vdpa: solidrun: Fix UB bug with devres In psnet_open_pf_bar() and snet_open_vf_bar() a string later passed to pcim_iomap_regions() is placed on the stack. Neither pcim_iomap_regions() nor the functions it calls copy that string. Should the string later ever be used, this, consequently, causes undefined behavior since the stack frame will by then have disappeared. Fix the bug by allocating the strings on the heap through devm_kasprintf().

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix null-ptr-deref in block_touch_buffer tracepoint Patch series "nilfs2: fix null-ptr-deref bugs on block tracepoints". This series fixes null pointer dereference bugs that occur when using nilfs2 and two block-related tracepoints. This patch (of 2): It has been reported that when using "block:block_touch_buffer" tracepoint, touch_buffer() called from __nilfs_get_folio_block() causes a NULL pointer dereference, or a general protection fault when KASAN is enabled. This happens because since the tracepoint was added in touch_buffer(), it references the dev_t member bh->b_bdev->bd_dev regardless of whether the buffer head has a pointer to a block_device structure. In the current implementation, the block_device structure is set after the function returns to the caller. Here, touch_buffer() is used to mark the folio/page that owns the buffer head as accessed, but the common search helper for folio/page used by the caller function was optimized to mark the folio/page as accessed when it was reimplemented a long time ago, eliminating the need to call touch_buffer() here in the first place. So this solves the issue by eliminating the touch_buffer() call itself.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/oa: Fix "Missing outer runtime PM protection" warning Fix the following drm_WARN: [953.586396] xe 0000:00:02.0: [drm] Missing outer runtime PM protection ... <4> [953.587090] ? xe_pm_runtime_get_noresume+0x8d/0xa0 [xe] <4> [953.587208] guc_exec_queue_add_msg+0x28/0x130 [xe] <4> [953.587319] guc_exec_queue_fini+0x3a/0x40 [xe] <4> [953.587425] xe_exec_queue_destroy+0xb3/0xf0 [xe] <4> [953.587515] xe_oa_release+0x9c/0xc0 [xe] (cherry picked from commit b107c63d2953907908fd0cafb0e543b3c3167b75)

In the Linux kernel, the following vulnerability has been resolved: ARM: fix cacheflush with PAN It seems that the cacheflush syscall got broken when PAN for LPAE was implemented. User access was not enabled around the cache maintenance instructions, causing them to fault.

In the Linux kernel, the following vulnerability has been resolved: sctp: fix possible UAF in sctp_v6_available() A lockdep report [1] with CONFIG_PROVE_RCU_LIST=y hints that sctp_v6_available() is calling dev_get_by_index_rcu() and ipv6_chk_addr() without holding rcu. [1] ============================= WARNING: suspicious RCU usage 6.12.0-rc5-virtme #1216 Tainted: G W ----------------------------- net/core/dev.c:876 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by sctp_hello/31495: #0: ffff9f1ebbdb7418 (sk_lock-AF_INET6){+.+.}-{0:0}, at: sctp_bind (./arch/x86/include/asm/jump_label.h:27 net/sctp/socket.c:315) sctp stack backtrace: CPU: 7 UID: 0 PID: 31495 Comm: sctp_hello Tainted: G W 6.12.0-rc5-virtme #1216 Tainted: [W]=WARN Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:123) lockdep_rcu_suspicious (kernel/locking/lockdep.c:6822) dev_get_by_index_rcu (net/core/dev.c:876 (discriminator 7)) sctp_v6_available (net/sctp/ipv6.c:701) sctp sctp_do_bind (net/sctp/socket.c:400 (discriminator 1)) sctp sctp_bind (net/sctp/socket.c:320) sctp inet6_bind_sk (net/ipv6/af_inet6.c:465) ? security_socket_bind (security/security.c:4581 (discriminator 1)) __sys_bind (net/socket.c:1848 net/socket.c:1869) ? do_user_addr_fault (./include/linux/rcupdate.h:347 ./include/linux/rcupdate.h:880 ./include/linux/mm.h:729 arch/x86/mm/fault.c:1340) ? do_user_addr_fault (./arch/x86/include/asm/preempt.h:84 (discriminator 13) ./include/linux/rcupdate.h:98 (discriminator 13) ./include/linux/rcupdate.h:882 (discriminator 13) ./include/linux/mm.h:729 (discriminator 13) arch/x86/mm/fault.c:1340 (discriminator 13)) __x64_sys_bind (net/socket.c:1877 (discriminator 1) net/socket.c:1875 (discriminator 1) net/socket.c:1875 (discriminator 1)) do_syscall_64 (arch/x86/entry/common.c:52 (discriminator 1) arch/x86/entry/common.c:83 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130) RIP: 0033:0x7f59b934a1e7 Code: 44 00 00 48 8b 15 39 8c 0c 00 f7 d8 64 89 02 b8 ff ff ff ff eb bd 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 b8 31 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 09 8c 0c 00 f7 d8 64 89 01 48 All code ======== 0: 44 00 00 add %r8b,(%rax) 3: 48 8b 15 39 8c 0c 00 mov 0xc8c39(%rip),%rdx # 0xc8c43 a: f7 d8 neg %eax c: 64 89 02 mov %eax,%fs:(%rdx) f: b8 ff ff ff ff mov $0xffffffff,%eax 14: eb bd jmp 0xffffffffffffffd3 16: 66 2e 0f 1f 84 00 00 cs nopw 0x0(%rax,%rax,1) 1d: 00 00 00 20: 0f 1f 00 nopl (%rax) 23: b8 31 00 00 00 mov $0x31,%eax 28: 0f 05 syscall 2a:* 48 3d 01 f0 ff ff cmp $0xfffffffffffff001,%rax <-- trapping instruction 30: 73 01 jae 0x33 32: c3 ret 33: 48 8b 0d 09 8c 0c 00 mov 0xc8c09(%rip),%rcx # 0xc8c43 3a: f7 d8 neg %eax 3c: 64 89 01 mov %eax,%fs:(%rcx) 3f: 48 rex.W Code starting with the faulting instruction =========================================== 0: 48 3d 01 f0 ff ff cmp $0xfffffffffffff001,%rax 6: 73 01 jae 0x9 8: c3 ret 9: 48 8b 0d 09 8c 0c 00 mov 0xc8c09(%rip),%rcx # 0xc8c19 10: f7 d8 neg %eax 12: 64 89 01 mov %eax,%fs:(%rcx) 15: 48 rex.W RSP: 002b:00007ffe2d0ad398 EFLAGS: 00000202 ORIG_RAX: 0000000000000031 RAX: ffffffffffffffda RBX: 00007ffe2d0ad3d0 RCX: 00007f59b934a1e7 RDX: 000000000000001c RSI: 00007ffe2d0ad3d0 RDI: 0000000000000005 RBP: 0000000000000005 R08: 1999999999999999 R09: 0000000000000000 R10: 00007f59b9253298 R11: 000000000000 ---truncated---

A hardcoded decryption key in Thinkware Cloud APK v4.3.46 allows attackers to access sensitive data and execute arbitrary commands with elevated privileges.

An issue was discovered in Django 5.1 before 5.1.4, 5.0 before 5.0.10, and 4.2 before 4.2.17. The strip_tags() method and striptags template filter are subject to a potential denial-of-service attack via certain inputs containing large sequences of nested incomplete HTML entities.

The Kolide Agent (aka: Launcher) is the lightweight agent designed to work with Kolide's service. An implementation bug in the Kolide Agent (known as `launcher`) allows for local privilege escalation to the SYSTEM user on Windows 10 and 11. The bug was introduced in version 1.5.3 when launcher started storing upgraded binaries in the ProgramData directory. This move to the new directory meant the launcher root directory inherited default permissions that are not as strict as the previous location. These incorrect default permissions in conjunction with an omitted SystemDrive environmental variable (when launcher starts osqueryd), allows a malicious actor with access to the local Windows device to successfully place an arbitrary DLL into the osqueryd process's search path. Under some circumstances, this DLL will be executed when osqueryd performs a WMI query. This combination of events could then allow the attacker to escalate their privileges to SYSTEM. Impacted versions include versions >= 1.5.3 and the fix has been released in 1.12.3.

A vulnerability in the ClearPass Policy Manager web-based management interface allows remote authenticated users to run arbitrary commands on the underlying host. Successful exploit could allow an attacker to execute arbitrary commands as a lower privileged user on the underlying operating system.

A vulnerability in the HPE Aruba Networking ClearPass Policy Manager web-based management interface could allow an authenticated remote Attacker to conduct a stored cross-site scripting (XSS) attack. Successful exploitation could enable a threat actor to perform any actions the user is authorized to do, including accessing the user's data and altering information within the user's permissions. This could lead to data modification, deletion, or theft, including unauthorized access to files, file deletion, or the theft of session cookies, which an attacker could use to hijack a user's session.

An authenticated RCE vulnerability in the ClearPass Policy Manager web-based management interface allows remote authenticated users to run arbitrary commands on the underlying host. Successful exploitation could allow an attacker to execute arbitrary commands on the underlying operating system.

A vulnerability in the HPE Aruba Networking ClearPass Policy Manager web-based management interface could allow an authenticated remote threat actor to conduct a remote code execution attack. Successful exploitation could enable the attacker to run arbitrary commands on the underlying operating system.

An attacker who can execute arbitrary Operating Systems commands, can bypass code signing enforcements in the kernel, and execute arbitrary native code. This vulnerability has been resolved in firmware version 2.800.0000000.8.R.20241111.

An authenticated attacker can trigger a stack based buffer overflow in the DHIP Service (TCP port 80). This vulnerability has been resolved in firmware version 2.800.0000000.8.R.20241111.

An unauthenticated attacker can perform a null pointer dereference in the DHIP Service (UDP port 37810). This vulnerability has been resolved in firmware version 2.800.0000000.8.R.20241111.

An unauthenticated attacker can perform an out of bounds heap read in the IQ Service (TCP port 9876). This vulnerability has been resolved in firmware version 2.800.0000000.8.R.20241111.

An unauthenticated attacker can trigger a stack based buffer overflow in the DP Service (TCP port 3500). This vulnerability has been resolved in firmware version 2.800.0000000.8.R.20241111.

IBM Cognos Controller 11.0.0 and 11.0.1 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information.

IBM Cognos Controller 11.0.0 and 11.0.1 is vulnerable to malicious file upload by allowing unrestricted filetype attachments in the Journal entry page. Attackers can make use of this weakness and upload malicious executable files into the system and can be sent to victims for performing further attacks.

IBM Cognos Controller 11.0.0 and 11.0.1 is vulnerable to cross-site request forgery which could allow an attacker to execute malicious and unauthorized actions transmitted from a user that the website trusts.

IBM Cognos Controller 11.0.0 and 11.0.1 contains hard-coded credentials, such as a password or cryptographic key, which it uses for its own inbound authentication, outbound communication to external components, or encryption of internal data.

IBM Cognos Controller 11.0.0 and 11.0.1 could allow an authenticated user to upload insecure files, due to insufficient file type distinction.

Synapse is an open-source Matrix homeserver. Synapse before version 1.106 allows, by design, unauthenticated remote participants to trigger a download and caching of remote media from a remote homeserver to the local media repository. Such content then also becomes available for download from the local homeserver in an unauthenticated way. The implication is that unauthenticated remote adversaries can use this functionality to plant problematic content into the media repository. Synapse 1.106 introduces a partial mitigation in the form of new endpoints which require authentication for media downloads. The unauthenticated endpoints will be frozen in a future release, closing the attack vector.

Synapse is an open-source Matrix homeserver. Synapse versions before 1.106 are vulnerable to a disk fill attack, where an unauthenticated adversary can induce Synapse to download and cache large amounts of remote media. The default rate limit strategy is insufficient to mitigate this. This can lead to a denial of service, ranging from further media uploads/downloads failing to completely unavailability of the Synapse process, depending on how Synapse was deployed. Synapse 1.106 introduces a new "leaky bucket" rate limit on remote media downloads to reduce the amount of data a user can request at a time. This does not fully address the issue, but does limit an unauthenticated user's ability to request large amounts of data to be cached.

Synapse is an open-source Matrix homeserver. In Synapse before 1.120.1, multipart/form-data requests can in certain configurations transiently increase memory consumption beyond expected levels while processing the request, which can be used to amplify denial of service attacks. Synapse 1.120.1 resolves the issue by denying requests with unsupported multipart/form-data content type.

Synapse is an open-source Matrix homeserver. Synapse versions before 1.120.1 fail to properly validate invites received over federation. This vulnerability allows a malicious server to send a specially crafted invite that disrupts the invited user's /sync functionality. Synapse 1.120.1 rejects such invalid invites received over federation and restores the ability to sync for affected users.

Synapse is an open-source Matrix homeserver. The Sliding Sync feature on Synapse versions between 1.113.0rc1 and 1.120.0 can leak partial room state changes to users no longer in a room. Non-state events, like messages, are unaffected. This vulnerability is fixed in 1.120.1.

Synapse is an open-source Matrix homeserver. In Synapse versions before 1.120.1, enabling the dynamic_thumbnails option or processing a specially crafted request could trigger the decoding and thumbnail generation of uncommon image formats, potentially invoking external tools like Ghostscript for processing. This significantly expands the attack surface in a historically vulnerable area, presenting a risk that far outweighs the benefit, particularly since these formats are rarely used on the open web or within the Matrix ecosystem. Synapse 1.120.1 addresses the issue by restricting thumbnail generation to images in the following widely used formats: PNG, JPEG, GIF, and WebP. This vulnerability is fixed in 1.120.1.

IBM Cognos Controller 11.0.0 and 11.0.1 could allow an authenticated user with local access to bypass security allowing users to circumvent restrictions imposed on input fields.

IBM Cognos Controller 11.0.0 and 11.0.1 exposes server details that could allow an attacker to obtain information of the application environment to conduct further attacks.

IBM Cognos Controller 11.0.0 and 11.0.1 could be vulnerable to malicious file upload by not validating the content of the file uploaded to the web interface. Attackers can make use of this weakness and upload malicious executable files into the system, and it can be sent to victim for performing further attacks.

IBM Cognos Controller 11.0.0 and 11.0.1 could be vulnerable to malicious file upload by not validating the type of file uploaded to Journal entry attachments. Attackers can make use of this weakness and upload malicious executable files into the system that can be sent to victims for performing further attacks.

IBM Cognos Controller 11.0.0 and 11.0.1 could allow a remote attacker to obtain sensitive information, caused by the failure to properly enable HTTP Strict Transport Security. An attacker could exploit this vulnerability to obtain sensitive information using man in the middle techniques.

Vitess is a database clustering system for horizontal scaling of MySQL. The /debug/querylogz and /debug/env pages for vtgate and vttablet do not properly escape user input. The result is that queries executed by Vitess can write HTML into the monitoring page at will. These pages are rendered using text/template instead of rendering with a proper HTML templating engine. This vulnerability is fixed in 21.0.1, 20.0.4, and 19.0.8.

Mobile Security Framework (MobSF) is a pen-testing, malware analysis and security assessment framework capable of performing static and dynamic analysis. The application allows users to upload files with scripts in the filename parameter. As a result, a malicious user can upload a script file to the system. When users in the application use the "Diff or Compare" functionality, they are affected by a Stored Cross-Site Scripting vulnerability. This vulnerability is fixed in 4.2.9.

Mobile Security Framework (MobSF) is a pen-testing, malware analysis and security assessment framework capable of performing static and dynamic analysis. In versions prior to 3.9.7, the requests.get() request in the _check_url method is specified as allow_redirects=True, which allows a server-side request forgery when a request to .well-known/assetlinks.json" returns a 302 redirect. This is a bypass of the fix for CVE-2024-29190 and is fixed in 3.9.7.

Type Confusion in V8 in Google Chrome prior to 131.0.6778.108 allowed a remote attacker to potentially exploit object corruption via a crafted HTML page. (Chromium security severity: High)

The Advanced File Manager plugin for WordPress is vulnerable to arbitrary file uploads due to missing file type validation via the 'class_fma_connector.php' file in all versions up to, and including, 5.2.10. This makes it possible for authenticated attackers, with Subscriber-level access and above, and granted permissions by an Administrator, to upload arbitrary files on the affected site's server which may make remote code execution possible.

The Goodlayers Core plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the ‘font-family’ parameter in all versions up to, and including, 2.0.7 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link.

in OpenHarmony v4.1.1 and prior versions allow a local attacker cause information leak through out-of-bounds Read.

Dell NetWorker, version(s) 19.10, contain(s) an Authorization Bypass Through User-Controlled Key vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Information disclosure.

** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. Reason: This candidate was issued in error. Notes: All references and descriptions in this candidate have been removed to prevent accidental usage.

The Campaign Monitor Forms by Optin Cat plugin for WordPress is vulnerable to Reflected Cross-Site Scripting due to the use of add_query_arg without appropriate escaping on the URL in all versions up to, and including, 2.5.7. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link.

Dell NetWorker Management Console, version(s) 19.11, contain(s) an Improper Verification of Cryptographic Signature vulnerability. An unauthenticated attacker with local access could potentially exploit this vulnerability, leading to Code execution.

The WP Mailster plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'mst_subscribe' shortcode in all versions up to, and including, 1.8.17.0 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.