CVE Feed

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: validate DRAW_PRIMITIVES header size before division vmw_cmd_draw() computes maxnum = (header->size - sizeof(cmd->body)) / sizeof(*decl); where header->size is u32 and is taken straight from the user-supplied command stream. When header->size is less than sizeof(cmd->body) the unsigned subtraction wraps to nearly 4 GiB, producing a huge maxnum. Any user-controlled cmd->body.numVertexDecls then passes the bound and the loop dereferences decl[i] far past the end of the kernel command bounce buffer, producing an out-of-bounds read of kernel memory. Reject undersized headers up front.

In the Linux kernel, the following vulnerability has been resolved: can: peak_usb: peak_usb_start(): fix double free of transfer buffer on URB submit error In peak_usb_start(), each RX URB transfer buffer is allocated with kmalloc() and the URB is flagged URB_FREE_BUFFER so that the final usb_free_urb() also frees the transfer buffer. If usb_submit_urb() fails, the error path frees the buffer explicitly with kfree(buf) and then calls usb_free_urb(urb). Because URB_FREE_BUFFER is set, usb_free_urb() -> urb_destroy() frees the same buffer a second time, a double free of the transfer buffer. BUG: KASAN: double-free in usb_free_urb.part.0+0x91/0xb0 Free of addr ffff8881069ccb80 by task trigger.sh/285 Call Trace: kfree+0x113/0x3c0 usb_free_urb.part.0+0x91/0xb0 Drop the redundant kfree(buf); usb_free_urb() already releases the transfer buffer. This mirrors commit 03819abbeb11 ("net: usb: lan78xx: Fix double free issue with interrupt buffer allocation").

In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix skb leak on flow key update failure during ct ovs_ct_execute() always steals or frees the skb on failure while ovs_flow_key_update() does not. So, if it fails and we return right away, the skb ends up leaked. Fix that by breaking instead and letting the common error handling code at the bottom of the loop to free the skb properly. This is a very unlikely scenario as it requires the packet to become unparseable by applying a set of actions on a previously parseable skb, but should be fixed nevertheless. Reported by Sashiko.

In the Linux kernel, the following vulnerability has been resolved: i2c: jz4780: Cache host clock rate at probe to prevent CCF prepare_lock deadlock Fix a severe AB/BA deadlock between the Common Clock Framework (CCF) and the I2C adapter lock, which triggers when an I2C-controlled clock generator client (like the Si5351) is registered or modified under the CCF. During an i2c client clock (generator) frequency change, the CCF acquires its global 'prepare_lock' mutex and the driver calls i2c_transfer() to update the client's chip registers, stalling for the adapter's I2C bus lock. Concurrently, an independent, parallel transfer on the same bus (e.g., a GPIO expander handling LEDs) can hold the I2C adapter lock. Inside this parallel transfer path, jz4780_i2c_set_speed() calls clk_get_rate() on the host controller's input clock to calculate bus timings. This call attempts to acquire the blocked CCF 'prepare_lock', creating a circular dependency that freezes the system. The jz4780 host controller clock itself is static and never changes at runtime. However, calling clk_get_rate() inside the active transfer path introduces an unnecessary dependency on the CCF internal locks. Eliminate this synchronous clk_get_rate() call from the active transfer path by caching the static host peripheral clock rate once - inside the private jz4780_i2c structure during jz4780_i2c_probe(). Update jz4780_i2c_set_speed() to use this cached value, safely decoupling active I2C transactions from the CCF internal locks without any risk of stale timings. Assisted-by web based Google AI (pinpointing the bug and writing the message).

In the Linux kernel, the following vulnerability has been resolved: tracing: Check return value of __register_event() in trace_module_add_events() trace_module_add_events() ignores the return value of __register_event() and unconditionally calls __add_event_to_tracers() for each event. If __register_event() fails (for example, if event_init() fails), the trace_event_call is not added to ftrace_events list, but __add_event_to_tracers() still creates a trace_event_file pointing to it. If module loading subsequently fails and module memory is freed, tracing state retains a stale trace_event_call pointer in trace_event_file, leading to a use-after-free when tracefs or tracing subsystem operations are later executed. Fix this by checking the return value of __register_event() and only calling __add_event_to_tracers() if event registration succeeded.

In the Linux kernel, the following vulnerability has been resolved: um: vector: fix use-after-free in vector_mmsg_rx() When vector_mmsg_rx() discards a packet whose overlay header fails verify_header(), it frees the skb and continues the loop: if (header_check < 0) { dev_kfree_skb_irq(skb); vp->estats.rx_encaps_errors++; continue; } The normal and short-packet paths fall through to the bottom of the loop body, which clears the consumed slot and advances the cursors: (*skbuff_vector) = NULL; mmsg_vector++; skbuff_vector++; The verify_header() < 0 path skips that via continue, so the freed skb is left in skbuff_vector[] and the cursors do not advance. The next iteration reads the same slot, gets the freed skb, and frees it again, producing a refcount underflow / use-after-free in the RX path. Discard the slot the same way the other paths do before continuing. Only transports whose verify_header() can return negative are affected: GRE and L2TPv3 do so on a cookie/session-id mismatch (raw/tap do not), so any peer on such a transport can trigger it without authentication.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: fix UAF in l2cap_le_connect_rsp l2cap_le_connect_rsp() obtains a channel via __l2cap_get_chan_by_ident() but neither holds a reference nor uses l2cap_chan_hold_unless_zero() before locking and operating on it. A concurrent l2cap_chan_del() triggered by a remote disconnect can free the channel between the lookup and l2cap_chan_lock(), causing a use-after-free. The BR/EDR counterpart l2cap_connect_rsp() and the sibling handler l2cap_le_command_rej() already use l2cap_chan_hold_unless_zero() to safely hold a reference, but l2cap_le_connect_rsp() was left unprotected. Fix by adding l2cap_chan_hold_unless_zero() after the ident lookup and l2cap_chan_put() on the exit path, consistent with other L2CAP response handlers.

In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix list corruption in allocate_file_region_entries() allocate_file_region_entries() tops up resv->region_cache with freshly allocated file_region descriptors. The allocation uses GFP_KERNEL, so resv->lock is dropped around it: the new entries are gathered on a stack-local list head, allocated_regions, and spliced into resv->region_cache once the lock is re-acquired. The splice used list_splice(), which moves the entries but does not re-initialize the source head, so allocated_regions is left pointing at an entry that now lives on resv->region_cache. The top-up runs in a while loop that re-checks the cache deficit after re-acquiring the lock. For a shared mapping the resv_map is shared by every mapper of the hugetlbfs inode, so a concurrent region_chg()/region_add()/region_del() on the same resv_map can consume cache entries during the unlocked window and force a second iteration. That iteration calls list_add() on the stale head and corrupts the list; with CONFIG_DEBUG_LIST the __list_add_valid() check trips: list_add corruption. next->prev should be prev (ffffc900011ff7f8), but was ffff88814c281460. (next=ffff88814c545640). kernel BUG at lib/list_debug.c:31! allocate_file_region_entries+0x191/0x420 region_chg+0x267/0x300 hugetlb_reserve_pages+0x387/0xc80 hugetlbfs_file_mmap+0x2ce/0x3f0 mmap_region+0x1348/0x1a80 do_mmap+0x85e/0xb90 vm_mmap_pgoff+0x18c/0x330 ksys_mmap_pgoff+0x2a1/0x3e0 do_syscall_64+0xd7/0x420 Without CONFIG_DEBUG_LIST the bad list_add() silently links a kernel-stack address into resv->region_cache, leading to later use-after-free. This was observed as a real host panic on a dense KVM host where a QEMU guest-RAM hugetlbfs file was mapped MAP_SHARED by both QEMU and a separate SPDK/DPDK vhost-user target, generating concurrent region_* traffic on one shared resv_map. Use list_splice_init() so the source head is re-initialized empty after each splice, making the retry loop safe.

In the Linux kernel, the following vulnerability has been resolved: KVM: s390: pci: Fix memory accounting for pinned/unpinned pages The account_mem() and unaccount_mem() functions call get_uid() which increments the reference count of struct user_struct on every invocation. But we don't decrement the count by calling free_uid(). It also accounted/unaccounted the pages against the current->mm. But its possible the unaccount_mem() can be called from a different process context than the one that originally pinned the pages. Let's fix this by storing the pinning process user_struct and mm_struct when accounting for pinned pages, and subsequently free these resources when the pages are unpinned. [[email protected]: Fixed whitespace]

In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_rateest: fix u64 truncation in xt_rateest_mt() On links faster than ~34 Gbps, where byte rate may exceed 2^32-1 (~ 4.3 GBps), the comparison result becomes incorrect because the truncated value no longer reflects the actual estimator rate. Fix by changing the local variables to u64.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/pt: Fix NULL pointer dereference in xe_pt_zap_ptes_entry() The page-table walk framework may pass a NULL *child pointer for unpopulated entries. xe_pt_zap_ptes_entry() called container_of(*child) before checking for NULL, then dereferenced the result, causing a crash. Move the container_of() call after a NULL guard, so the function returns early instead of proceeding with an invalid pointer. XE_WARN_ON is kept to help root cause the issue, but we now bail instead of crashing the driver. v2: Comment that triggering XE_WARN_ON is unexpected behavior (Matt Brost) (cherry picked from commit b9297d19d9df5d4b6c994648570c5dcd1cac68ff)

In the Linux kernel, the following vulnerability has been resolved: net: dsa: sja1105: round up PTP perout pin duration pin_duration is converted from the user-provided period to SJA1105 clock ticks and is later passed as the cycle_time argument to future_base_time(). Very small period values may become zero after the conversion, which can lead to a division by zero in future_base_time(). Round zero pin_duration up to 1 tick so that the smallest unsupported periods use the minimum non-zero hardware duration instead of passing zero to future_base_time().

In the Linux kernel, the following vulnerability has been resolved: ipv6: ioam: fix type confusion of dst_entry IOAM uses a dummy dst_entry(null_dst) to mark that the destination should not be changed after the transformation. This dst is stored in the IOAM lwt state and may be passed to dst_cache_set_ip6(). However, the IPv6 dst cache path eventually calls rt6_get_cookie(), which treats the dst_entry as part of a struct rt6_info. Since the null_dst was embedded directly as a struct dst_entry in struct ioam6_lwt, this resulted in an invalid cast and rt6_get_cookie() reading fields from the wrong object. In practice, the wrong cookie is not used while dst->obsolete is zero, but rt6_get_cookie() may also access per-cpu value when rt->sernum is zero. In this case, rt->sernum aliases ioam6_lwt::cache::reset_ts, which can become zero, making this a potential invalid pointer access. Fix this by embedding a full struct rt6_info for the dummy IPv6 route and passing its dst member to the dst APIs.

In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Zero the tile state data array before each BIN job The binner BO is a single 16MB buffer split into 512KB slots that are handed out to jobs at submission time and recycled as jobs complete, without ever being cleared. Each slot holds the job's Tile State Data Array (TSDA) at its start, followed by the tile allocation pool. While the tile allocation pool is only walked by the render thread through branches the binner generated during the current job, the TSDA is the PTB's own per-tile bookkeeping and is consumed by the hardware itself. Although the kernel sets the "Auto-initialise Tile State Data Array" flag in the tile binning mode configuration, the PTB demonstrably still acts on stale tile state left by the slot's previous user: the binner ends up creating invalid command streams with invalid primitive streams and branches, which can cause GPU hangs as observed in [1][2]. Zero the TSDA when the job's binning slot is configured. This clears 48 bytes per tile (~24KB for a 1080p frame) in the submission path, and guarantees the PTB never sees another job's tile state. The tile count is only checked for being non-zero today, so the 8-bit fields it comes from can describe a tile state array almost six times larger than the slot it has to live in. Bound it before the slot is handed out, since such size decides how much of the slot is left for the tile alloc pool.

In the Linux kernel, the following vulnerability has been resolved: net: wwan: t7xx: check skb_clone in control TX t7xx_port_ctrl_tx() clones each skb fragment before passing it to the port transmit path. The clone is used immediately to set cloned->len, so an skb_clone() failure results in a NULL pointer dereference. Check the clone before using it. If previous fragments were already queued, preserve the driver's existing partial-write behavior by returning the number of bytes submitted so far.

In the Linux kernel, the following vulnerability has been resolved: net: mana: initialize gdma queue id to INVALID_QUEUE_ID mana_gd_create_mana_wq_cq() leaves queue->id as 0 (from kzalloc_obj()) until mana_create_wq_obj() assigns the firmware-returned id. If creation fails before that, cleanup calls mana_gd_destroy_cq() with id 0, NULLing gc->cq_table[0] and silently breaking whichever real CQ owns that slot. Initialize queue->id to INVALID_QUEUE_ID right after allocation, matching mana_gd_create_eq(). The existing (id >= max_num_cqs) guard then short-circuits cleanly.

In the Linux kernel, the following vulnerability has been resolved: drm/radeon: fix memory leak in radeon_ring_restore() on lock failure radeon_ring_restore() takes ownership of the data buffer allocated by radeon_ring_backup(). The caller (radeon_gpu_reset()) only frees it in the non-restore branch; in the restore branch it relies on radeon_ring_restore() to free it. If radeon_ring_lock() fails, the function returned early without calling kvfree(data), leaking the ring backup buffer on every GPU reset that fails at the lock stage. During repeated GPU resets this causes cumulative kernel memory exhaustion. Free data before returning the error.

In the Linux kernel, the following vulnerability has been resolved: bpf: Reject exclusive maps for bpf_map_elem iterators Exclusive maps (aka excl_prog_hash) are meant to be reachable only from the single program whose hash matches. This is enforced by check_map_prog_compatibility() when the map is referenced from a program such as signed BPF loaders. A bpf_map_elem iterator, however, binds its target map at attach time in bpf_iter_attach_map() instead of referencing it from the program, so the exclusivity check is never reached. On top of that, the iterator exposes the map value as a writable buffer.

In the Linux kernel, the following vulnerability has been resolved: vxlan: use pskb_network_may_pull() in route_shortcircuit() route_shortcircuit() currently calls pskb_may_pull(skb, sizeof(struct iphdr)) (or ipv6hdr), which checks if bytes are available starting from skb->data. However, in vxlan_xmit(), skb->data points to the MAC header, so skb_network_offset(skb) is ETH_HLEN (14 bytes). Using pskb_may_pull(skb, 20) only checks 20 bytes from skb->data (which is 14 bytes MAC header + 6 bytes of IP header), leaving the rest of the IP header potentially un-pulled in non-linear frags. Subsequent dereferences of ip_hdr(skb)->daddr can read beyond the pulled linear buffer length. Fix this by using pskb_network_may_pull(), which adds skb_network_offset(skb) to the length check to ensure the full network header is present in the linear buffer.

In the Linux kernel, the following vulnerability has been resolved: net: bridge: stop fast-leave after deleting a port group br_multicast_leave_group() iterates mp->ports with pp = &p->next in its fast-leave path. After br_multicast_del_pg() removes p, continuing the loop advances pp through the deleted entry. If multicast-to-unicast was enabled, the bridge can hold multiple port groups for the same port and group with different source MAC addresses. Once multicast-to-unicast is disabled, br_port_group_equal() matches those entries by port only. A fast leave can then delete one entry and continue from its stale next pointer, leaving mp->ports pointing at a deleted port group. Fast leave only needs to remove one matching port group. Break after br_multicast_del_pg() so the loop stops before dereferencing the removed entry.

In the Linux kernel, the following vulnerability has been resolved: net/smc: fix socket use-after-free during link group termination __smc_lgr_terminate() drops conns_lock after finding a connection in lgr->conns_all, but before taking a reference on its socket. The connection is embedded in the socket, and its registration reference protects it only while the connection remains in the tree. A concurrent close can unregister the connection and drop that reference, freeing the socket before the termination worker reaches sock_hold(). The race is reachable when close overlaps link group termination. Local stress testing reproduced the use-after-free and KASAN reported: BUG: KASAN: slab-use-after-free in __smc_lgr_terminate.part.0 [smc] Write of size 4 by task kworker/3:3 Workqueue: events smc_lgr_terminate_work [smc] __smc_lgr_terminate.part.0 [smc] The socket was allocated by smc_create(), freed through slab_free_after_rcu_debug(), and was followed by: refcount_t: addition on 0; use-after-free. __smc_lgr_terminate.part.0 [smc] Take the socket reference while conns_lock still protects the tree entry. The unregister path then cannot drop the last reference until termination has finished using the socket.

In the Linux kernel, the following vulnerability has been resolved: audit: fix potential use-after-free in audit_del_rule() `audit_del_rule()` destroys `e->rule.exe` via `audit_remove_mark_rule()` before unlinking the rule from RCU-visible filter lists and waiting for a grace period. Concurrent readers in `audit_filter()` and `audit_filter_rules()` still dereference `e->rule.exe`, while the fsnotify mark can be freed on an independent lifetime path. This creates a use-after-free window during rule deletion. Fix this by unlinking the rule from the RCU-visible lists and invoking `synchronize_rcu()` before calling `audit_remove_mark_rule()` (and other rule removal helpers). This ensures that all existing RCU readers have exited the critical section before any underlying resources are destroyed.

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Fix DMA buffer out-of-bounds write when fill_max is set When a USB audio endpoint requests full packet transfers via the fill_max descriptor flag, data_ep_set_params() promotes ep->curpacksize to ep->maxpacksize. However, maxsize is left at the original sample-rate derived value. Since u->buffer_size is allocated as maxsize * packets, the resulting DMA buffer is far too small for the requested transfer length. When the USB host controller streams up to curpacksize bytes per packet, it writes past the end of the buffer via DMA, corrupting kernel heap memory. Update maxsize to curpacksize when fill_max is set so that the allocated DMA buffer size matches the actual transfer request size. [ changed to reassign maxsize only when ep->fill_max is set -- tiwai ]

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix leaking sk after socket release iso_sock_kill() tests !sock_flag(sk, SOCK_ZAPPED) || sk->sk_socket || sock_flag(sk, SOCK_DEAD) for early return, but this is always true since sock_orphan(sk) sets SOCK_DEAD, so the sk reference released by socket always leaks, iso_sock_destruct is never called. The socket reference also leaks when __iso_sock_close() does not set SOCK_ZAPPED, since iso_conn_del() does not call iso_sock_kill() after zapping. Fix by replacing SOCK_DEAD by BT_SK_KILLED flag that is not used for something else, and lock_sock to ensure iso_sock_kill() puts sk only after socket release only once. Release and iso_conn_del may run concurrently. Call iso_sock_kill() from iso_conn_del() to clean sk up after zapping. Remove call to iso_sock_kill() from iso_sock_close(), as it's generally no-op there.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (adt7470) Fix busy-loop and I2C flooding in update thread When userspace configures 'auto_update_interval' to 0 via sysfs, the background kthread executes schedule_timeout_interruptible(0), which returns immediately. If 'num_temp_sensors' is concurrently or previously set to 0, the msleep_interruptible() delay inside adt7470_read_temperatures() also becomes 0. This combination forces the background thread into a tight, unbounded busy-loop, hogging the CPU and flooding the I2C bus with a continuous stream of transactions. Fix this vulnerability by raising the lower limit of the clamp_val in auto_update_interval_store() from 0 to 500 milliseconds. This guarantees a reasonable minimum sleep window between sensor updates, protecting the system from intentional or accidental I2C bus denial of service.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_sip: widen NAT rewrite delta to s32 in sip_help_tcp() sip_help_tcp() stores the size change of each NAT-rewritten SIP message in s16 diff and accumulates it in s16 tdiff, but a single message can grow by more than S16_MAX while the packet stays under the 65535 enlarge_skb() limit: nf_nat_sip() rewrites every matching URI, and a long Contact list expands the message by tens of kilobytes. diff then wraps, and "datalen = datalen + diff - msglen" yields a huge unsigned datalen, so the next iteration's ct_sip_get_header() reads past the linearized skb tail. Widen diff, tdiff and the seq_adjust hook to s32. Both are bounded by the 65535 byte packet limit, and the seqadj core is already s32 (nf_ct_seqadj_set() takes s32), so no previously accepted input is rejected. BUG: KASAN: use-after-free in ct_sip_get_header (net/netfilter/nf_conntrack_sip.c:464) Read of size 1 at addr ffff888010800000 by task ksoftirqd/1/25 ct_sip_get_header (net/netfilter/nf_conntrack_sip.c:464) sip_help_tcp (net/netfilter/nf_conntrack_sip.c:1694) nf_confirm (net/netfilter/nf_conntrack_proto.c:183) nf_hook_slow (net/netfilter/core.c:619) ip6_output (net/ipv6/ip6_output.c:246) ip6_forward (net/ipv6/ip6_output.c:690) ipv6_rcv (net/ipv6/ip6_input.c:351) __netif_receive_skb_one_core (net/core/dev.c:6212) process_backlog (net/core/dev.c:6676) __napi_poll (net/core/dev.c:7735) net_rx_action (net/core/dev.c:7955) handle_softirqs (kernel/softirq.c:622) run_ksoftirqd (kernel/softirq.c:1076) ...

In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_codel: Do not call qdisc_tree_reduce_backlog during peek before restoring qlen Whenever codel drops packets during peek, it calls qdisc_tree_reduce_backlog. An issue arises because it calls qdisc_tree_reduce_backlog before it reincrements the qlen. If qlen drops to zero, but peek returns an skb, the parent's qlen_notify callback will be executed even though codel still has 1 packet on the queue and, thus, will mistakenly deactivate the parent's class causing issues like a wild memory access when qfq has codel as a child: [ 36.339843][ T370] Oops: general protection fault, probably for non-canonical address 0xfbd59c0000000024: 0000 [#1] SMP KASAN NOPTI [ 36.340408][ T370] KASAN: maybe wild-memory-access in range [0xdead000000000120-0xdead000000000127] [ 36.340737][ T370] CPU: 2 UID: 0 PID: 370 Comm: tc Not tainted 7.1.0-rc5-00287-g66e13b626592 #87 PREEMPT(full) [ 36.341113][ T370] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 36.341357][ T370] RIP: 0010:qfq_deactivate_agg (include/linux/list.h:1029 (discriminator 2) include/linux/list.h:1043 (discriminator 2) net/sched/sch_qfq.c:1369 (discriminator 2) net/sched/sch_qfq.c:1395 (discriminator 2)) sch_qfq [ 36.342221][ T370] RSP: 0018:ffff8881100ef370 EFLAGS: 00010216 [ 36.342422][ T370] RAX: 0000000000000000 RBX: ffff8881058a9568 RCX: dffffc0000000000 [ 36.342664][ T370] RDX: 1ffff11021064dc3 RSI: ffff888108326e00 RDI: dffffc0000000000 [ 36.342905][ T370] RBP: ffff8881058a8280 R08: dead000000000122 R09: 1bd5a00000000024 [ 36.343140][ T370] R10: fffffbfff2940329 R11: fffffbfff2940329 R12: 0000000000000000 [ 36.343383][ T370] R13: dead000000000100 R14: ffff8881058a9580 R15: ffff8881058a9578 [ 36.343631][ T370] FS: 00007fc04b0ca780(0000) GS:ffff888184fef000(0000) knlGS:0000000000000000 [ 36.343911][ T370] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 36.344116][ T370] CR2: 0000557c02c02000 CR3: 000000010e0ba000 CR4: 0000000000750ef0 [ 36.344359][ T370] PKRU: 55555554 [ 36.344481][ T370] Call Trace: ... [ 36.345054][ T370] qfq_reset_qdisc (net/sched/sch_qfq.c:357 net/sched/sch_qfq.c:1487) sch_qfq [ 36.345222][ T370] qdisc_reset (net/sched/sch_generic.c:1057) [ 36.345503][ T370] __qdisc_destroy (net/sched/sch_generic.c:1096) [ 36.345677][ T370] qdisc_graft (net/sched/sch_api.c:1062 net/sched/sch_api.c:1053 net/sched/sch_api.c:1159) [ 36.346335][ T370] tc_get_qdisc (net/sched/sch_api.c:1528 net/sched/sch_api.c:1556) Fix this by only calling qdisc_tree_reduce_backlog in peek after the qlen is restored.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_qca: fix NULL pointer dereference in qca_setup() for non-serdev device hu->serdev is NULL for hci_uart attached via non-serdev paths, but qca_setup() unconditionally calls serdev_device_get_drvdata(hu->serdev) and dereferences the result, causing a NULL pointer dereference. Fix by guarding the dereference with a NULL check, consistent with the rest of qca_setup().

In the Linux kernel, the following vulnerability has been resolved: firmware_loader: Fix recursive lock in device_cache_fw_images() A recursive locking deadlock can occur in the firmware loader's power management notification handler. During system suspend or hibernation preparation, fw_pm_notify() calls device_cache_fw_images(). This function acquires fw_lock to set the firmware cache state to FW_LOADER_START_CACHE and then iterates over all devices using dpm_for_each_dev() while still holding the lock. For each device, dev_cache_fw_image() schedules asynchronous work to cache the firmware. If memory allocation for the async work entry fails (e.g., in out-of-memory conditions), async_schedule_node_domain() falls back to executing the work function synchronously in the current thread. The synchronous execution path (__async_dev_cache_fw_image() -> cache_firmware() -> request_firmware() -> assign_fw()) attempts to acquire fw_lock again. Since the current thread already holds fw_lock, this results in a recursive locking deadlock. Fix this by releasing fw_lock immediately after updating the cache state and before calling dpm_for_each_dev(). The lock is only needed to protect the state update. Concurrent firmware requests will correctly see the FW_LOADER_START_CACHE state and use the piggyback mechanism, which is independently protected by its own fwc->name_lock.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix NULL pointer dereference in bpf_task_from_vpid() bpf_task_from_vpid() looks up a task in the pid namespace of the current task, via find_task_by_vpid(): find_task_by_vpid(vpid) find_task_by_pid_ns(vpid, task_active_pid_ns(current)) find_pid_ns(nr, ns) -> idr_find(&ns->idr, nr) cgroup_skb programs run in softirq, which may interrupt a task that is itself in do_exit(). Once that task has passed exit_notify() -> release_task() -> __unhash_process(), its thread_pid is cleared, so task_active_pid_ns(current) returns NULL and find_pid_ns() dereferences &NULL->idr: BUG: kernel NULL pointer dereference, address: 0000000000000050 RIP: 0010:idr_find+0x11/0x30 lib/idr.c:176 Call Trace: <IRQ> find_pid_ns kernel/pid.c:370 [inline] find_task_by_pid_ns+0x3b/0xe0 kernel/pid.c:485 bpf_task_from_vpid+0x5b/0x200 kernel/bpf/helpers.c:2916 bpf_prog_run_array_cg+0x17e/0x530 kernel/bpf/cgroup.c:81 __cgroup_bpf_run_filter_skb+0x12b/0x250 kernel/bpf/cgroup.c:1612 sk_filter_trim_cap+0x1dc/0x4c0 net/core/filter.c:148 tcp_v4_rcv+0x18d1/0x2200 net/ipv4/tcp_ipv4.c:2223 </IRQ> <TASK> do_exit+0xa63/0x1270 kernel/exit.c:1010 get_signal+0x141c/0x1530 kernel/signal.c:3037 Bail out when current has no pid namespace.

In the Linux kernel, the following vulnerability has been resolved: watchdog: unregister PM notifier on watchdog unregister watchdog_register_device() registers wdd->pm_nb when WDOG_NO_PING_ON_SUSPEND is set, but watchdog_unregister_device() does not remove it. This leaves an embedded notifier block on the PM notifier chain after the watchdog device has been unregistered. A later suspend/resume notification can then call watchdog_pm_notifier() with a stale watchdog_device pointer, or at minimum after wdd->wd_data has been cleared by watchdog_dev_unregister(). Unregister the PM notifier before tearing down the watchdog device.

In the Linux kernel, the following vulnerability has been resolved: dax/kmem: account for partial discontiguous resource upon removal When dev_dax_kmem_probe() partially succeeds (at least one range is mapped) but a subsequent range fails request_mem_region() or add_memory_driver_managed(), the probe silently continues, ultimately returning success, but with the corresponding range resource NULL'ed out. dev_dax_kmem_remove() iterates over all dax_device ranges regardless of if the underlying resource exists. When remove_memory() is called later, it returns 0 because the memory was never added which causes dev_dax_kmem_remove() to incorrectly assume the (nonexistent) resource can be removed and attempts cleanup on a NULL pointer. Fix this by skipping these ranges altogether, noting that these cases are considered success, such that the cleanup is still reached when all actually-added ranges are successfully removed.

In the Linux kernel, the following vulnerability has been resolved: of: reserved_mem: avoid post-init UAF when alloc_reserved_mem_array() fails The global pointer 'reserved_mem' continues to reference the reserved_mem_array which lives in __initdata if alloc_reserved_mem_array() fails. of_reserved_mem_lookup() is exported for post-init use, that would dereference freed memory and trigger a use-after-free. So reset reserved_mem_count to 0 when alloc_reserved_mem_array() fails.

In the Linux kernel, the following vulnerability has been resolved: bpf: fix crash in bpf_[set|remove]_dentry_xattr for negative dentries bpf_set_dentry_xattr and bpf_remove_dentry_xattr BPF kfuncs attempt to lock the inode of the supplied dentry without checking if it is NULL. If a negative dentry is passed (e.g. from security_inode_create), d_inode(dentry) returns NULL, and inode_lock(inode) will cause a NULL pointer dereference. Trivially fix this by adding a NULL check for inode before attempting to lock it, returning -EINVAL if it is NULL. Additionally, drop WARN_ON(!inode) in bpf_xattr_read_permission() and bpf_xattr_write_permission(). These warnings could be triggered by passing a negative dentry to bpf_get_dentry_xattr() or the _locked variants of the xattr kfuncs, potentially causing a Denial of Service on systems with panic_on_warn enabled. Instead, simply return -EINVAL.

In the Linux kernel, the following vulnerability has been resolved: dma-fence: Fix potential tracepoint null pointer dereferences Trace_dma_fence_signaled, trace_dma_fence_wait_end and trace_dma_fence_destroy can all currently dereference a null fence->ops pointer after it has been reset on fence signalling. Lets use the safe string getters for most tracepoints to avoid this class of a problem, while for the signal tracepoint we move it to before ops are cleared to avoid losing the driver and timeline name information. Apart from moving it we also need to add a new tracepoint class to bypass the safe name getters since the signaled bit is already set. For dma_fence_init we also need to use the new tracepoint class since the rcu read lock is not held there, and we can do the same for the enable signaling since there we are certain the fence cannot be signaled while we are holding the lock and have even validated the fence->ops.

In the Linux kernel, the following vulnerability has been resolved: drm/rockchip: inno-hdmi: Switch to drmm_kzalloc() Driver makes use of drmm_encoder_init() to initialize the encoder and automatically handle the cleanup by registering drm_encoder_cleanup() with drmm_add_action(). However, the internal structure containing the encoder part gets allocated with devm_kzalloc(), which happens while component_bind_all() is being called from Rockchip DRM driver. The component framework further ensures it is deallocated as part of releasing all the resources claimed during bind, which is triggered from component_unbind_all(). When the reference to the DRM device gets eventually dropped via drm_dev_put() in rockchip_drm_unbind(), drmm_encoder_alloc_release() attempts to access the now released encoder structure, leading to use-after-free. Ensure driver's internal structure is still reachable on encoder cleanup by switching from a device-managed allocation to a drm-managed one.

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix the reception of a reply packet before data transmission Fix rxrpc_receiving_reply() to handle the reception of an apparent reply DATA packet before rxrpc has had a chance to send any request DATA packets on a client call by checking to see if the call has been exposed yet by sending the first packet. Without this, rxrpc_rotate_tx_window() might oops. Also fix rxrpc_rotate_tx_window() to handle the Tx queue being empty by changing the do...while loop into a while loop, just in case a call is abnormally terminated by an early reply before the last request packet is transmitted.

In the Linux kernel, the following vulnerability has been resolved: drm/panthor: validate firmware interface structure sizes iface_fw_to_cpu_addr() only checks that the firmware-provided MCU virtual address points inside the shared section. The returned pointer is later used as a full firmware interface structure, so accepting an address near the end of the shared section can still lead to out-of-bounds accesses. Pass the expected object size to iface_fw_to_cpu_addr() and reject ranges that do not fit entirely in the shared section.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix uint32_t overflow in EOP ring buffer size alignment eop_ring_buffer_size in struct queue_properties is a u32. In kfd_queue_acquire_buffers() the expected EOP buffer size is computed as ALIGN(eop_ring_buffer_size, PAGE_SIZE); ALIGN uses typeof(x), so the addition is done in 32-bit. A user-supplied size of 0xFFFFF001 wraps to 0, causing kfd_queue_buffer_get() to skip its exact-size check (gated on size != 0) and accept any BO mapped at the address. On GFX8/GFX9 the MQD cp_hqd_eop_control is then programmed for an 8KB EOP ring backed by a 4KB BO, so CP EOP writes can land past the buffer and fault the GPU. Cast the operand to u64 so the alignment is computed in 64-bit; the size check in kfd_queue_buffer_get() then rejects the oversized request. (cherry picked from commit ae443117b742c357bfef3a7bddabf76fcf86e9ef)

In the Linux kernel, the following vulnerability has been resolved: drm/panthor: reject firmware sections with oversized data In panthor_fw_load_section_entry(), the data size to copy is calculated without validating it against the allocated section_size: section->data.size = hdr.data.end - hdr.data.start; If a crafted firmware sets data.size larger than the allocated memory, this could cause a heap buffer overflow in panthor_fw_init_section_mem() memcpy(section->mem->kmap, section->data.buf, section->data.size); Additionally, if the section->data.size exceeds the BO size, could this memset underflow the size calculation, leading to a massive out-of-bounds zeroing of kernel memory? memset(section->mem->kmap + section->data.size, 0, panthor_kernel_bo_size(section->mem) - section->data.size); Reject section entries whose initial data is larger than the section size.

In the Linux kernel, the following vulnerability has been resolved: mtd: mchp23k256: use SPI match data for chip caps The driver stores chip capacity information in both the OF match table and the SPI id table. Probe currently uses of_device_get_match_data(), so a non-OF SPI modalias match falls back to mchp23k256_caps even when the SPI id table selected a different part. Use spi_get_device_match_data() so SPI id-table driver_data is consumed when OF match data is absent. This keeps the existing default fallback while avoiding the wrong MTD geometry for id-table-only matches.

In the Linux kernel, the following vulnerability has been resolved: bpf: Reject negative const offsets for buffer pointers The verifier rejects variable offsets for PTR_TO_TP_BUFFER and PTR_TO_BUF accesses, but it currently accepts a constant negative offset produced by pointer arithmetic. Commit 022ac0750883 ("bpf: use reg->var_off instead of reg->off for pointers") moved constant pointer offsets from reg->off to reg->var_off. However, __check_buffer_access() continued to check only the instruction offset. An access with reg->var_off equal to -8 and an instruction offset of zero therefore passes verification. For writable raw tracepoints, the access end is also calculated from the unsigned reg->var_off.value. An eight-byte access starting at -8 wraps the calculated end to zero, allowing the program to load and attach without increasing max_tp_access. After ensuring that reg->var_off is constant, calculate the effective access start using signed arithmetic and reject it when it is negative. Use the validated start to calculate the access end for both PTR_TO_TP_BUFFER and PTR_TO_BUF.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix potential deadlock in gc_merge path of f2fs_balance_fs() When we mount device w/ gc_merge mount option, we may suffer below potential deadlock: Kworker GC trehad Truncator - f2fs_write_cache_pages - f2fs_write_single_data_page - f2fs_do_write_data_page - folio_start_writeback --- set writeback flag on folio - f2fs_outplace_write_data : cached folio in internal bio cache - f2fs_balance_fs - wake_up(gc_thread) : wake up gc thread to run foreground GC - finish_wait(fggc_wq) : wait on the waitqueue --- wait on GC thread to finish the work - truncate_inode_pages_range - __filemap_get_folio(, FGP_LOCK) --- lock folio - truncate_inode_partial_folio - folio_wait_writeback --- wait on writeback being cleared - do_garbage_collect - move_data_page - f2fs_get_lock_data_folio - lock on folio --- blocked on folio's lock In order to avoid such deadlock, let's call below functions to commit cached bios in GC_MERGE path of f2fs_balance_fs() as the same as we did in NOGC_MERGE path. - f2fs_submit_merged_write(sbi, DATA); - f2fs_submit_all_merged_ipu_writes(sbi);

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Re-translate VNCR before injecting abort KVM faults in the VNCR page with FOLL_WRITE whenever the guest aborts for a write, similar to how a regular stage-2 mapping is handled. It is entirely possible that the guest reads from the VNCR before writing to it, in which case the PFN could only be read-only. Invalidate the VNCR TLB and re-fetch the translation upon taking a VNCR abort, allowing the host mapping to be faulted in for write the second time around. Interestingly enough, this also satisfies the ordering requirements of FEAT_ETS2/3 between descriptor updates and MMU faults.

In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-laptop: fix missing cleanups in init error path dell_init() initializes several resources after dell_setup_rfkill(), including the optional touchpad LED, keyboard backlight LED, battery hook, debugfs directory and dell-laptop notifier. If a later LED or backlight registration fails, the error path only tears down the battery hook and rfkill resources. This leaves the notifier, debugfs directory, keyboard backlight LED and optional touchpad LED registered after dell_init() returns an error. Add the missing cleanup calls before tearing down rfkill.

In the Linux kernel, the following vulnerability has been resolved: bpf: Reset register bounds before narrowing retval range in check_mem_access() When the BPF verifier processes a context load of an LSM hook return value, it calls __mark_reg_s32_range() to narrow the register to the hook's valid range. However, __mark_reg_s32_range() intersects the new range with the register's existing bounds using max_t()/min_t() rather than replacing them. If the destination register carries stale bounds from a prior instruction (e.g. BPF_MOV64_IMM), the intersection can produce a range narrower than reality. The verifier then believes it knows the register's exact value, while at runtime the actual hook return value is loaded, creating a verifier/runtime mismatch that can be used to bypass BPF memory safety checks. The else branch already calls mark_reg_unknown() to reset register state before any narrowing. Apply the same reset in the is_retval path so stale bounds are cleared before __mark_reg_s32_range() intersects.

In the Linux kernel, the following vulnerability has been resolved: dm-verity: fix buffer overflow in FEC calculation There's a buffer overflow in dm-verity-fec: if (neras && *neras <= v->fec->roots) fio->erasures[(*neras)++] = i; This allows *neras to reach roots + 1 (the post-increment pushes it past roots). This value is then passed as no_eras to decode_rs8(). Inside the RS decoder (lib/reed_solomon/decode_rs.c:113-121), the erasure locator polynomial loop writes lambda[j] where j can reach nroots + 1 — one element past the end of lambda[] (which is sized nroots + 1, valid indices 0..nroots). The out-of-bounds write lands on syn[0], corrupting the syndrome buffer.

In the Linux kernel, the following vulnerability has been resolved: selinux: check connect-related permissions on TCP Fast Open Similar to Landlock, SELinux was not updated when TCP Fast Open support was introduced to ensure connect-related permissions are checked when using TCP Fast Open. Update its socket_sendmsg() hook to call selinux_socket_connect() when MSG_FASTOPEN is passed.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_nat_sip: reload possible stale data pointer quoting sashiko: ------------------------------------------------------------------------ [..] noticed a potential memory bug and header corruption involving the SIP NAT helper. In net/netfilter/nf_nat_sip.c:nf_nat_sip(): if (skb_ensure_writable(skb, skb->len)) { nf_ct_helper_log(skb, ct, "cannot mangle packet"); return NF_DROP; } uh = (void *)skb->data + protoff; uh->dest = ct_sip_info->forced_dport; if (!nf_nat_mangle_udp_packet(skb, ct, ctinfo, protoff, 0, 0, NULL, 0)) { If a cloned or fragmented SKB is reallocated by skb_ensure_writable(), the old data buffer is freed. However, nf_nat_sip() fails to update *dptr to point to the new buffer. It also appears to use nf_nat_mangle_udp_packet() on what could be a TCP packet, which would overwrite the sequence number with a checksum update. ------------------------------------------------------------------------ nf_conntrack_sip linerizes skbs, hence no fragmented skb can be seen. But clones are possible, so rebuild dptr. Disable nf_nat_mangle_udp_packet() branch for TCP streams. It doesn't look like this can ever happen, else we should have received bug reports about this, so just check the conntrack is UDP and drop otherwise. The calling conntrack_sip set ->forced_dport for SIP_HDR_VIA_UDP messages, so I don't think this is ever expected to be true for a TCP stream.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_sip: validate skb_dst() before accessing it tc ingress and openvswitch do not guarantee routing information to be available. These subsystems use the conntrack helper infrastructure, and the SIP helper relies on the skb_dst() to be present if sip_external_media is set to 1 (which is disabled by default as a module parameter). This effectively disables the sip_external_media toggle for these subsystems without resulting in a crash.