CVE Feed

A DLL hijack vulnerability was reported in Lenovo Service Framework that could allow a local attacker to execute code with elevated privileges.

A DLL hijack vulnerability was reported in Lenovo PC Manager AI intelligent scenario that could allow a local attacker to execute code with elevated privileges.

An Exposure of Sensitive Information to an Unauthorized Actor vulnerability in the command-line interface (CLI) of Juniper Networks Junos OS on SRX Series devices allows a local, low-privileged user with access to the Junos CLI to view the contents of protected files on the file system. Through the execution of crafted CLI commands, a user with limited permissions (e.g., a low privilege login class user) can access protected files that should not be accessible to the user. These files may contain sensitive information that can be used to cause further impact to the system. This issue affects Junos OS on SRX Series:  * All versions before 21.4R3-S8,  * 22.2 before 22.2R3-S5,  * 22.3 before 22.3R3-S4,  * 22.4 before 22.4R3-S4,  * 23.2 before 23.2R2-S2,  * 23.4 before 23.4R2.

A DLL hijack vulnerability was reported in Lenovo Personal Cloud that could allow a local attacker to execute code with elevated privileges.

A DLL hijack vulnerability was reported in Lenovo Baiying that could allow a local attacker to execute code with elevated privileges.

An Improper Handling of Exceptional Conditions vulnerability in packet processing of Juniper Networks Junos OS on MX Series with MPC10/MPC11/LC9600 line cards, EX9200 with EX9200-15C lines cards, MX304 devices, and Juniper Networks Junos OS Evolved on PTX Series, allows an attacker sending malformed DHCP packets to cause ingress packet processing to stop, leading to a Denial of Service (DoS).  Continued receipt and processing of these packets will create a sustained Denial of Service (DoS) condition. This issue only occurs if DHCP snooping is enabled. See configuration below. This issue can be detected using following commands. Their output will display the interface status going down: user@device>show interfaces <if--x/x/x> user@device>show log messages | match <if--x/x/x> user@device>show log messages ==> will display the "[Error] Wedge-Detect : Host Loopback Wedge Detected: PFE: no," logs. This issue affects: Junos OS on MX Series with MPC10/MPC11/LC9600 line cards, EX9200 with EX9200-15C line cards, and MX304: * All versions before 21.2R3-S7, * from 21.4 before 21.4R3-S6, * from 22.2 before 22.2R3-S3, * all versions of 22.3, * from 22.4 before 22.4R3, * from 23.2 before 23.2R2; Junos OS Evolved on PTX Series: * from 19.3R1-EVO before 21.2R3-S8-EVO, * from 21.4-EVO before 21.4R3-S7-EVO, * from 22.1-EVO before 22.1R3-S6-EVO, * from 22.2-EVO before 22.2R3-S5-EVO, * from 22.3-EVO before 22.3R3-S3-EVO, * from 22.4-EVO before 22.4R3-S1-EVO, * from 23.2-EVO before 23.2R2-S2-EVO, * from 23.4-EVO before 23.4R2-EVO. Junos OS Evolved releases prior to 19.3R1-EVO are unaffected by this vulnerability

A DLL hijack vulnerability was reported in Lenovo Leyun that could allow a local attacker to execute code with elevated privileges.

A DLL hijack vulnerability was reported in Lenovo stARstudio that could allow a local attacker to execute code with elevated privileges.

A DLL hijack vulnerability was reported in Lenovo Lock Screen that could allow a local attacker to execute code with elevated privileges.

A DLL hijack vulnerability was reported in Lenovo Emulator that could allow a local attacker to execute code with elevated privileges.

A DLL hijack vulnerability was reported in Lenovo App Store that could allow a local attacker to execute code with elevated privileges.

A DLL hijack vulnerability was reported in Lenovo Super File that could allow a local attacker to execute code with elevated privileges.

A potential information disclosure vulnerability was reported in Lenovo's packaging of Dolby Vision Provisioning software prior to version 2.0.0.2 that could allow a local attacker to read files on the system with elevated privileges during installation of the package. Previously installed versions are not affected by this issue.

DOMPurify is a DOM-only, super-fast, uber-tolerant XSS sanitizer for HTML, MathML and SVG. DOMpurify was vulnerable to nesting-based mXSS. This vulnerability is fixed in 2.5.0 and 3.1.3.

Plane is an open-source project management tool. Plane uses the ** wildcard support to retrieve the image from any hostname as in /web/next.config.js. This may permit an attacker to induce the server side into performing requests to unintended locations. This vulnerability is fixed in 0.23.0.

DataEase is an open source data visualization analysis tool. In Dataease, the PostgreSQL data source in the data source function can customize the JDBC connection parameters and the PG server target to be connected. In backend/src/main/java/io/dataease/provider/datasource/JdbcProvider.java, PgConfiguration class don't filter any parameters, directly concat user input. So, if the attacker adds some parameters in JDBC url, and connect to evil PG server, the attacker can trigger the PG jdbc deserialization vulnerability, and eventually the attacker can execute through the deserialization vulnerability system commands and obtain server privileges. The vulnerability has been fixed in v1.18.25.

Picotls is a TLS protocol library that allows users select different crypto backends based on their use case. When parsing a spoofed TLS handshake message, picotls (specifically, bindings within picotls that call the crypto libraries) may attempt to free the same memory twice. This double free occurs during the disposal of multiple objects without any intervening calls to malloc Typically, this triggers the malloc implementation to detect the error and abort the process. However, depending on the internals of malloc and the crypto backend being used, the flaw could potentially lead to a use-after-free scenario, which might allow for arbitrary code execution. The vulnerability is addressed with commit 9b88159ce763d680e4a13b6e8f3171ae923a535d.

Quicly is an IETF QUIC protocol implementation. Quicly up to commtit d720707 is susceptible to a denial-of-service attack. A remote attacker can exploit these bugs to trigger an assertion failure that crashes process using quicly. The vulnerability is addressed with commit 2a95896104901589c495bc41460262e64ffcad5c.

h2o is an HTTP server with support for HTTP/1.x, HTTP/2 and HTTP/3. When h2o is configured as a reverse proxy and HTTP/3 requests are cancelled by the client, h2o might crash due to an assertion failure. The crash can be exploited by an attacker to mount a Denial-of-Service attack. By default, the h2o standalone server automatically restarts, minimizing the impact. However, HTTP requests that were served concurrently will still be disrupted. The vulnerability has been addressed in commit 1ed32b2. Users may disable the use of HTTP/3 to mitigate the issue.

h2o is an HTTP server with support for HTTP/1.x, HTTP/2 and HTTP/3. When an HTTP request using TLS/1.3 early data on top of TCP Fast Open or QUIC 0-RTT packets is received and the IP-address-based access control is used, the access control does not detect and prohibit HTTP requests conveyed by packets with a spoofed source address. This behavior allows attackers on the network to execute HTTP requests from addresses that are otherwise rejected by the address-based access control. The vulnerability has been addressed in commit 15ed15a. Users may disable the use of TCP FastOpen and QUIC to mitigate the issue.

** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. Reason: This candidate was issued in error. Notes: All references and descriptions in this candidate have been removed to prevent accidental usage.

h2o is an HTTP server with support for HTTP/1.x, HTTP/2 and HTTP/3. The configuration directives provided by the headers handler allows users to modify the response headers being sent by h2o. The configuration file of h2o has scopes, and the inner scopes (e.g., path level) are expected to inherit the configuration defined in outer scopes (e.g., global level). However, if a header directive is used in the inner scope, all the definition in outer scopes are ignored. This can lead to headers not being modified as expected. Depending on the headers being added or removed unexpectedly, this behavior could lead to unexpected client behavior. This vulnerability is fixed in commit 123f5e2b65dcdba8f7ef659a00d24bd1249141be.

Improper Input Validation vulnerability of Authenticated User in Progress LoadMaster allows : OS Command Injection.This issue affects:  Product Affected Versions LoadMaster From 7.2.55.0 to 7.2.60.1 (inclusive)    From 7.2.49.0 to 7.2.54.12 (inclusive)    7.2.48.12 and all prior versions Multi-Tenant Hypervisor 7.1.35.12 and all prior versions ECS All prior versions to 7.2.60.1 (inclusive)

CWE-306: Missing Authentication for Critical Function vulnerability exists that could cause exposure of private data when an already generated “logcaptures” archive is accessed directly by HTTPS.

A denial of service may be caused to a single peripheral device in a BLE network when multiple central devices continuously connect and disconnect to the peripheral. A hard reset is required to recover the peripheral device.

CWE-347: Improper Verification of Cryptographic Signature vulnerability exists that could compromise the Data Center Expert software when an upgrade bundle is manipulated to include arbitrary bash scripts that are executed as root.

CWE-269: Improper Privilege Management vulnerability exists that could cause unauthorized access, loss of confidentiality, integrity, and availability of the workstation when non-admin authenticated user tries to perform privilege escalation by tampering with the binaries

A vulnerability was found in 07FLYCMS, 07FLY-CMS and 07FlyCRM 1.3.8. It has been rated as problematic. Affected by this issue is some unknown functionality of the component System Settings Page. The manipulation of the argument Login Interface Copyright leads to cross site scripting. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The affected product is known with different names like 07FLYCMS, 07FLY-CMS, and 07FlyCRM. It was not possible to reach out to the vendor before assigning a CVE due to a not working mail address.

A vulnerability was found in 07FLYCMS, 07FLY-CMS and 07FlyCRM 1.3.8. It has been declared as critical. Affected by this vulnerability is the function uploadFile of the file /admin/SysModule/upload/ajaxmodel/upload/uploadfilepath/sysmodule_1 of the component Module Plug-In Handler. The manipulation of the argument file leads to unrestricted upload. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The affected product is known with different names like 07FLYCMS, 07FLY-CMS, and 07FlyCRM. It was not possible to reach out to the vendor before assigning a CVE due to a not working mail address.

An issue was discovered in GitLab CE/EE affecting all versions starting from 11.6 prior to 17.2.9, starting from 17.3 prior to 17.3.5, and starting from 17.4 prior to 17.4.2, which allows an attacker to trigger a pipeline as another user under certain circumstances.

A path traversal vulnerability exists in the parisneo/lollms-webui repository, specifically in the `lollms_file_system.py` file. The functions `add_rag_database`, `toggle_mount_rag_database`, and `vectorize_folder` do not implement security measures such as `sanitize_path_from_endpoint` or `sanitize_path`. This allows an attacker to perform vectorize operations on `.sqlite` files in any directory on the victim's computer, potentially installing multiple packages and causing a crash.

PAX Android based POS devices allow for escalation of privilege via improperly configured scripts. An attacker must have shell access with system account privileges in order to exploit this vulnerability. A patch addressing this issue was included in firmware version PayDroid_8.1.0_Sagittarius_V11.1.61_20240226.

An issue has been discovered discovered in GitLab EE/CE affecting all versions starting from 11.4 before 17.2.9, all versions starting from 17.3 before 17.3.5, all versions starting from 17.4 before 17.4.2 It was possible for guest users to disclose project templates using the API.

An issue was discovered in GitLab EE affecting all versions starting from 12.5 prior to 17.2.9, starting from 17.3, prior to 17.3.5, and starting from 17.4 prior to 17.4.2, which allows running pipelines on arbitrary branches.

The ShopLentor plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 2.9.8 via the 'render' function in includes/addons/wl_faq.php. This makes it possible for authenticated attackers, with Contributor-level access and above, to extract sensitive private, pending, and draft Elementor template data.

The The Plus Addons for Elementor – Elementor Addons, Page Templates, Widgets, Mega Menu, WooCommerce plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 5.6.11 via the render function in modules/widgets/tp_accordion.php. This makes it possible for authenticated attackers, with Contributor-level access and above, to extract sensitive private, pending, and draft template data.

The WordPress Comments Import & Export plugin for WordPress is vulnerable to to arbitrary file read due to insufficient file path validation during the comments import process, in versions up to, and including, 2.3.7. This makes it possible for authenticated attackers, with Author-level access and above, to read the contents of arbitrary files on the server, which can contain sensitive information. The issue was partially fixed in version 2.3.8 and fully fixed in 2.3.9

A Server-Side Request Forgery (SSRF) vulnerability in SMA1000 appliance firmware versions 12.4.3-02676 and earlier allows a remote, unauthenticated attacker to cause the SMA1000 server-side application to make requests to an unintended IP address.

The Improper link resolution before file access ('Link Following') vulnerability in SonicWall Connect Tunnel (version 12.4.3.271 and earlier of Windows client) allows users with standard privileges to delete arbitrary folders and files, potentially leading to local privilege escalation attack.

The Improper link resolution before file access ('Link Following') vulnerability in SonicWall Connect Tunnel (version 12.4.3.271 and earlier of Windows client) allows users with standard privileges to create arbitrary folders and files, potentially leading to local Denial of Service (DoS) attack.

The WP Ultimate Post Grid plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's wpupg-grid-with-filters shortcode in all versions up to, and including, 3.9.3 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.

The Contact Form by Bit Form: Multi Step Form, Calculation Contact Form, Payment Contact Form & Custom Contact Form builder plugin for WordPress is vulnerable to arbitrary file read in all versions up to, and including, 2.15.2 due to improper input validation within the iconUpload function. This makes it possible for authenticated attackers, with Administrator-level access and above, to leverage a PHP filter chain attack and read the contents of arbitrary files on the server, which can contain sensitive information.

The FULL – Cliente plugin for WordPress is vulnerable to Reflected Cross-Site Scripting due to the use of add_query_arg & remove_query_arg without appropriate escaping on the URL in all versions up to, and including, 3.1.22. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link.

The Language Switcher plugin for WordPress is vulnerable to Reflected Cross-Site Scripting due to the use of add_query_arg without appropriate escaping on the URL in all versions up to, and including, 3.7.13. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link.

The GutenKit – Page Builder Blocks, Patterns, and Templates for Gutenberg Block Editor plugin for WordPress is vulnerable to arbitrary file uploads due to a missing capability check on the install_and_activate_plugin_from_external() function (install-active-plugin REST API endpoint) in all versions up to, and including, 2.1.0. This makes it possible for unauthenticated attackers to install and activate arbitrary plugins, or utilize the functionality to upload arbitrary files spoofed like plugins.

The Download Plugins and Themes in ZIP from Dashboard plugin for WordPress is vulnerable to Reflected Cross-Site Scripting due to the use of add_query_arg without appropriate escaping on the URL in all versions up to, and including, 1.9.1. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link.

The Hunk Companion plugin for WordPress is vulnerable to unauthorized plugin installation/activation due to a missing capability check on the /wp-json/hc/v1/themehunk-import REST API endpoint in all versions up to, and including, 1.8.4. This makes it possible for unauthenticated attackers to install and activate arbitrary plugins which can be leveraged to achieve remote code execution if another vulnerable plugin is installed and activated.

The PublishPress Revisions: Duplicate Posts, Submit, Approve and Schedule Content Changes plugin for WordPress is vulnerable to Reflected Cross-Site Scripting due to the use of add_query_arg without appropriate escaping on the URL in all versions up to, and including, 3.5.14. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link.

The Tainacan plugin for WordPress is vulnerable to Reflected Cross-Site Scripting due to the use of add_query_arg without appropriate escaping on the URL in all versions up to, and including, 0.21.10. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link.

The BlockMeister – Block Pattern Builder plugin for WordPress is vulnerable to Reflected Cross-Site Scripting due to the use of add_query_arg without appropriate escaping on the URL in all versions up to, and including, 3.1.10. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link.