CVE Feed

In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd: Fix refcount leak in amd_pmc_probe pci_get_domain_bus_and_slot() takes reference, the caller should release the reference by calling pci_dev_put() after use. Call pci_dev_put() in the error path to fix this.

In the Linux kernel, the following vulnerability has been resolved: ice: Fix potential memory leak in ice_gnss_tty_write() The ice_gnss_tty_write() return directly if the write_buf alloc failed, leaking the cmd_buf. Fix by free cmd_buf if write_buf alloc failed.

In the Linux kernel, the following vulnerability has been resolved: ice: Add check for kzalloc Add the check for the return value of kzalloc in order to avoid NULL pointer dereference. Moreover, use the goto-label to share the clean code.

In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu-v3: Don't unregister on shutdown Similar to SMMUv2, this driver calls iommu_device_unregister() from the shutdown path, which removes the IOMMU groups with no coordination whatsoever with their users - shutdown methods are optional in device drivers. This can lead to NULL pointer dereferences in those drivers' DMA API calls, or worse. Instead of calling the full arm_smmu_device_remove() from arm_smmu_device_shutdown(), let's pick only the relevant function call - arm_smmu_device_disable() - more or less the reverse of arm_smmu_device_reset() - and call just that from the shutdown path.

In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu: Don't unregister on shutdown Michael Walle says he noticed the following stack trace while performing a shutdown with "reboot -f". He suggests he got "lucky" and just hit the correct spot for the reboot while there was a packet transmission in flight. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098 CPU: 0 PID: 23 Comm: kworker/0:1 Not tainted 6.1.0-rc5-00088-gf3600ff8e322 #1930 Hardware name: Kontron KBox A-230-LS (DT) pc : iommu_get_dma_domain+0x14/0x20 lr : iommu_dma_map_page+0x9c/0x254 Call trace: iommu_get_dma_domain+0x14/0x20 dma_map_page_attrs+0x1ec/0x250 enetc_start_xmit+0x14c/0x10b0 enetc_xmit+0x60/0xdc dev_hard_start_xmit+0xb8/0x210 sch_direct_xmit+0x11c/0x420 __dev_queue_xmit+0x354/0xb20 ip6_finish_output2+0x280/0x5b0 __ip6_finish_output+0x15c/0x270 ip6_output+0x78/0x15c NF_HOOK.constprop.0+0x50/0xd0 mld_sendpack+0x1bc/0x320 mld_ifc_work+0x1d8/0x4dc process_one_work+0x1e8/0x460 worker_thread+0x178/0x534 kthread+0xe0/0xe4 ret_from_fork+0x10/0x20 Code: d503201f f9416800 d503233f d50323bf (f9404c00) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception in interrupt This appears to be reproducible when the board has a fixed IP address, is ping flooded from another host, and "reboot -f" is used. The following is one more manifestation of the issue: $ reboot -f kvm: exiting hardware virtualization cfg80211: failed to load regulatory.db arm-smmu 5000000.iommu: disabling translation sdhci-esdhc 2140000.mmc: Removing from iommu group 11 sdhci-esdhc 2150000.mmc: Removing from iommu group 12 fsl-edma 22c0000.dma-controller: Removing from iommu group 17 dwc3 3100000.usb: Removing from iommu group 9 dwc3 3110000.usb: Removing from iommu group 10 ahci-qoriq 3200000.sata: Removing from iommu group 2 fsl-qdma 8380000.dma-controller: Removing from iommu group 20 platform f080000.display: Removing from iommu group 0 etnaviv-gpu f0c0000.gpu: Removing from iommu group 1 etnaviv etnaviv: Removing from iommu group 1 caam_jr 8010000.jr: Removing from iommu group 13 caam_jr 8020000.jr: Removing from iommu group 14 caam_jr 8030000.jr: Removing from iommu group 15 caam_jr 8040000.jr: Removing from iommu group 16 fsl_enetc 0000:00:00.0: Removing from iommu group 4 arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications arm-smmu 5000000.iommu: GFSR 0x80000002, GFSYNR0 0x00000002, GFSYNR1 0x00000429, GFSYNR2 0x00000000 fsl_enetc 0000:00:00.1: Removing from iommu group 5 arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications arm-smmu 5000000.iommu: GFSR 0x80000002, GFSYNR0 0x00000002, GFSYNR1 0x00000429, GFSYNR2 0x00000000 arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications arm-smmu 5000000.iommu: GFSR 0x80000002, GFSYNR0 0x00000000, GFSYNR1 0x00000429, GFSYNR2 0x00000000 fsl_enetc 0000:00:00.2: Removing from iommu group 6 fsl_enetc_mdio 0000:00:00.3: Removing from iommu group 8 mscc_felix 0000:00:00.5: Removing from iommu group 3 fsl_enetc 0000:00:00.6: Removing from iommu group 7 pcieport 0001:00:00.0: Removing from iommu group 18 arm-smmu 5000000.iommu: Blocked unknown Stream ID 0x429; boot with "arm-smmu.disable_bypass=0" to allow, but this may have security implications arm-smmu 5000000.iommu: GFSR 0x00000002, GFSYNR0 0x00000000, GFSYNR1 0x00000429, GFSYNR2 0x00000000 pcieport 0002:00:00.0: Removing from iommu group 19 Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a8 pc : iommu_get_dma_domain+0x14/0x20 lr : iommu_dma_unmap_page+0x38/0xe0 Call trace: iommu_get_dma_domain+0x14/0x20 dma_unmap_page_attrs+0x38/0x1d0 en ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dp: do not complete dp_aux_cmd_fifo_tx() if irq is not for aux transfer There are 3 possible interrupt sources are handled by DP controller, HPDstatus, Controller state changes and Aux read/write transaction. At every irq, DP controller have to check isr status of every interrupt sources and service the interrupt if its isr status bits shows interrupts are pending. There is potential race condition may happen at current aux isr handler implementation since it is always complete dp_aux_cmd_fifo_tx() even irq is not for aux read or write transaction. This may cause aux read transaction return premature if host aux data read is in the middle of waiting for sink to complete transferring data to host while irq happen. This will cause host's receiving buffer contains unexpected data. This patch fixes this problem by checking aux isr and return immediately at aux isr handler if there are no any isr status bits set. Current there is a bug report regrading eDP edid corruption happen during system booting up. After lengthy debugging to found that VIDEO_READY interrupt was continuously firing during system booting up which cause dp_aux_isr() to complete dp_aux_cmd_fifo_tx() prematurely to retrieve data from aux hardware buffer which is not yet contains complete data transfer from sink. This cause edid corruption. Follows are the signature at kernel logs when problem happen, EDID has corrupt header panel-simple-dp-aux aux-aea0000.edp: Couldn't identify panel via EDID Changes in v2: -- do complete if (ret == IRQ_HANDLED) ay dp-aux_isr() -- add more commit text Changes in v3: -- add Stephen suggested -- dp_aux_isr() return IRQ_XXX back to caller -- dp_ctrl_isr() return IRQ_XXX back to caller Changes in v4: -- split into two patches Changes in v5: -- delete empty line between tags Changes in v6: -- remove extra "that" and fixed line more than 75 char at commit text Patchwork: https://patchwork.freedesktop.org/patch/516121/

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: IPoIB, Block PKEY interfaces with less rx queues than parent A user is able to configure an arbitrary number of rx queues when creating an interface via netlink. This doesn't work for child PKEY interfaces because the child interface uses the parent receive channels. Although the child shares the parent's receive channels, the number of rx queues is important for the channel_stats array: the parent's rx channel index is used to access the child's channel_stats. So the array has to be at least as large as the parent's rx queue size for the counting to work correctly and to prevent out of bound accesses. This patch checks for the mentioned scenario and returns an error when trying to create the interface. The error is propagated to the user.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix race between quota rescan and disable leading to NULL pointer deref If we have one task trying to start the quota rescan worker while another one is trying to disable quotas, we can end up hitting a race that results in the quota rescan worker doing a NULL pointer dereference. The steps for this are the following: 1) Quotas are enabled; 2) Task A calls the quota rescan ioctl and enters btrfs_qgroup_rescan(). It calls qgroup_rescan_init() which returns 0 (success) and then joins a transaction and commits it; 3) Task B calls the quota disable ioctl and enters btrfs_quota_disable(). It clears the bit BTRFS_FS_QUOTA_ENABLED from fs_info->flags and calls btrfs_qgroup_wait_for_completion(), which returns immediately since the rescan worker is not yet running. Then it starts a transaction and locks fs_info->qgroup_ioctl_lock; 4) Task A queues the rescan worker, by calling btrfs_queue_work(); 5) The rescan worker starts, and calls rescan_should_stop() at the start of its while loop, which results in 0 iterations of the loop, since the flag BTRFS_FS_QUOTA_ENABLED was cleared from fs_info->flags by task B at step 3); 6) Task B sets fs_info->quota_root to NULL; 7) The rescan worker tries to start a transaction and uses fs_info->quota_root as the root argument for btrfs_start_transaction(). This results in a NULL pointer dereference down the call chain of btrfs_start_transaction(). The stack trace is something like the one reported in Link tag below: general protection fault, probably for non-canonical address 0xdffffc0000000041: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000208-0x000000000000020f] CPU: 1 PID: 34 Comm: kworker/u4:2 Not tainted 6.1.0-syzkaller-13872-gb6bb9676f216 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Workqueue: btrfs-qgroup-rescan btrfs_work_helper RIP: 0010:start_transaction+0x48/0x10f0 fs/btrfs/transaction.c:564 Code: 48 89 fb 48 (...) RSP: 0018:ffffc90000ab7ab0 EFLAGS: 00010206 RAX: 0000000000000041 RBX: 0000000000000208 RCX: ffff88801779ba80 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000 RBP: dffffc0000000000 R08: 0000000000000001 R09: fffff52000156f5d R10: fffff52000156f5d R11: 1ffff92000156f5c R12: 0000000000000000 R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2bea75b718 CR3: 000000001d0cc000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> btrfs_qgroup_rescan_worker+0x3bb/0x6a0 fs/btrfs/qgroup.c:3402 btrfs_work_helper+0x312/0x850 fs/btrfs/async-thread.c:280 process_one_work+0x877/0xdb0 kernel/workqueue.c:2289 worker_thread+0xb14/0x1330 kernel/workqueue.c:2436 kthread+0x266/0x300 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308 </TASK> Modules linked in: So fix this by having the rescan worker function not attempt to start a transaction if it didn't do any rescan work.

In the Linux kernel, the following vulnerability has been resolved: btrfs: qgroup: do not warn on record without old_roots populated [BUG] There are some reports from the mailing list that since v6.1 kernel, the WARN_ON() inside btrfs_qgroup_account_extent() gets triggered during rescan: WARNING: CPU: 3 PID: 6424 at fs/btrfs/qgroup.c:2756 btrfs_qgroup_account_extents+0x1ae/0x260 [btrfs] CPU: 3 PID: 6424 Comm: snapperd Tainted: P OE 6.1.2-1-default #1 openSUSE Tumbleweed 05c7a1b1b61d5627475528f71f50444637b5aad7 RIP: 0010:btrfs_qgroup_account_extents+0x1ae/0x260 [btrfs] Call Trace: <TASK> btrfs_commit_transaction+0x30c/0xb40 [btrfs c39c9c546c241c593f03bd6d5f39ea1b676250f6] ? start_transaction+0xc3/0x5b0 [btrfs c39c9c546c241c593f03bd6d5f39ea1b676250f6] btrfs_qgroup_rescan+0x42/0xc0 [btrfs c39c9c546c241c593f03bd6d5f39ea1b676250f6] btrfs_ioctl+0x1ab9/0x25c0 [btrfs c39c9c546c241c593f03bd6d5f39ea1b676250f6] ? __rseq_handle_notify_resume+0xa9/0x4a0 ? mntput_no_expire+0x4a/0x240 ? __seccomp_filter+0x319/0x4d0 __x64_sys_ioctl+0x90/0xd0 do_syscall_64+0x5b/0x80 ? syscall_exit_to_user_mode+0x17/0x40 ? do_syscall_64+0x67/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fd9b790d9bf </TASK> [CAUSE] Since commit e15e9f43c7ca ("btrfs: introduce BTRFS_QGROUP_RUNTIME_FLAG_NO_ACCOUNTING to skip qgroup accounting"), if our qgroup is already in inconsistent state, we will no longer do the time-consuming backref walk. This can leave some qgroup records without a valid old_roots ulist. Normally this is fine, as btrfs_qgroup_account_extents() would also skip those records if we have NO_ACCOUNTING flag set. But there is a small window, if we have NO_ACCOUNTING flag set, and inserted some qgroup_record without a old_roots ulist, but then the user triggered a qgroup rescan. During btrfs_qgroup_rescan(), we firstly clear NO_ACCOUNTING flag, then commit current transaction. And since we have a qgroup_record with old_roots = NULL, we trigger the WARN_ON() during btrfs_qgroup_account_extents(). [FIX] Unfortunately due to the introduction of NO_ACCOUNTING flag, the assumption that every qgroup_record would have its old_roots populated is no longer correct. Fix the false alerts and drop the WARN_ON().

In the Linux kernel, the following vulnerability has been resolved: nilfs2: fix general protection fault in nilfs_btree_insert() If nilfs2 reads a corrupted disk image and tries to reads a b-tree node block by calling __nilfs_btree_get_block() against an invalid virtual block address, it returns -ENOENT because conversion of the virtual block address to a disk block address fails. However, this return value is the same as the internal code that b-tree lookup routines return to indicate that the block being searched does not exist, so functions that operate on that b-tree may misbehave. When nilfs_btree_insert() receives this spurious 'not found' code from nilfs_btree_do_lookup(), it misunderstands that the 'not found' check was successful and continues the insert operation using incomplete lookup path data, causing the following crash: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] ... RIP: 0010:nilfs_btree_get_nonroot_node fs/nilfs2/btree.c:418 [inline] RIP: 0010:nilfs_btree_prepare_insert fs/nilfs2/btree.c:1077 [inline] RIP: 0010:nilfs_btree_insert+0x6d3/0x1c10 fs/nilfs2/btree.c:1238 Code: bc 24 80 00 00 00 4c 89 f8 48 c1 e8 03 42 80 3c 28 00 74 08 4c 89 ff e8 4b 02 92 fe 4d 8b 3f 49 83 c7 28 4c 89 f8 48 c1 e8 03 <42> 80 3c 28 00 74 08 4c 89 ff e8 2e 02 92 fe 4d 8b 3f 49 83 c7 02 ... Call Trace: <TASK> nilfs_bmap_do_insert fs/nilfs2/bmap.c:121 [inline] nilfs_bmap_insert+0x20d/0x360 fs/nilfs2/bmap.c:147 nilfs_get_block+0x414/0x8d0 fs/nilfs2/inode.c:101 __block_write_begin_int+0x54c/0x1a80 fs/buffer.c:1991 __block_write_begin fs/buffer.c:2041 [inline] block_write_begin+0x93/0x1e0 fs/buffer.c:2102 nilfs_write_begin+0x9c/0x110 fs/nilfs2/inode.c:261 generic_perform_write+0x2e4/0x5e0 mm/filemap.c:3772 __generic_file_write_iter+0x176/0x400 mm/filemap.c:3900 generic_file_write_iter+0xab/0x310 mm/filemap.c:3932 call_write_iter include/linux/fs.h:2186 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x7dc/0xc50 fs/read_write.c:584 ksys_write+0x177/0x2a0 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd ... </TASK> This patch fixes the root cause of this problem by replacing the error code that __nilfs_btree_get_block() returns on block address conversion failure from -ENOENT to another internal code -EINVAL which means that the b-tree metadata is corrupted. By returning -EINVAL, it propagates without glitches, and for all relevant b-tree operations, functions in the upper bmap layer output an error message indicating corrupted b-tree metadata via nilfs_bmap_convert_error(), and code -EIO will be eventually returned as it should be.

In the Linux kernel, the following vulnerability has been resolved: nommu: fix memory leak in do_mmap() error path The preallocation of the maple tree nodes may leak if the error path to "error_just_free" is taken. Fix this by moving the freeing of the maple tree nodes to a shared location for all error paths.

In the Linux kernel, the following vulnerability has been resolved: io_uring/poll: add hash if ready poll request can't complete inline If we don't, then we may lose access to it completely, leading to a request leak. This will eventually stall the ring exit process as well.

In the Linux kernel, the following vulnerability has been resolved: Add exception protection processing for vd in axi_chan_handle_err function Since there is no protection for vd, a kernel panic will be triggered here in exceptional cases. You can refer to the processing of axi_chan_block_xfer_complete function The triggered kernel panic is as follows: [ 67.848444] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000060 [ 67.848447] Mem abort info: [ 67.848449] ESR = 0x96000004 [ 67.848451] EC = 0x25: DABT (current EL), IL = 32 bits [ 67.848454] SET = 0, FnV = 0 [ 67.848456] EA = 0, S1PTW = 0 [ 67.848458] Data abort info: [ 67.848460] ISV = 0, ISS = 0x00000004 [ 67.848462] CM = 0, WnR = 0 [ 67.848465] user pgtable: 4k pages, 48-bit VAs, pgdp=00000800c4c0b000 [ 67.848468] [0000000000000060] pgd=0000000000000000, p4d=0000000000000000 [ 67.848472] Internal error: Oops: 96000004 [#1] SMP [ 67.848475] Modules linked in: dmatest [ 67.848479] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.10.100-emu_x2rc+ #11 [ 67.848483] pstate: 62000085 (nZCv daIf -PAN -UAO +TCO BTYPE=--) [ 67.848487] pc : axi_chan_handle_err+0xc4/0x230 [ 67.848491] lr : axi_chan_handle_err+0x30/0x230 [ 67.848493] sp : ffff0803fe55ae50 [ 67.848495] x29: ffff0803fe55ae50 x28: ffff800011212200 [ 67.848500] x27: ffff0800c42c0080 x26: ffff0800c097c080 [ 67.848504] x25: ffff800010d33880 x24: ffff80001139d850 [ 67.848508] x23: ffff0800c097c168 x22: 0000000000000000 [ 67.848512] x21: 0000000000000080 x20: 0000000000002000 [ 67.848517] x19: ffff0800c097c080 x18: 0000000000000000 [ 67.848521] x17: 0000000000000000 x16: 0000000000000000 [ 67.848525] x15: 0000000000000000 x14: 0000000000000000 [ 67.848529] x13: 0000000000000000 x12: 0000000000000040 [ 67.848533] x11: ffff0800c0400248 x10: ffff0800c040024a [ 67.848538] x9 : ffff800010576cd4 x8 : ffff0800c0400270 [ 67.848542] x7 : 0000000000000000 x6 : ffff0800c04003e0 [ 67.848546] x5 : ffff0800c0400248 x4 : ffff0800c4294480 [ 67.848550] x3 : dead000000000100 x2 : dead000000000122 [ 67.848555] x1 : 0000000000000100 x0 : ffff0800c097c168 [ 67.848559] Call trace: [ 67.848562] axi_chan_handle_err+0xc4/0x230 [ 67.848566] dw_axi_dma_interrupt+0xf4/0x590 [ 67.848569] __handle_irq_event_percpu+0x60/0x220 [ 67.848573] handle_irq_event+0x64/0x120 [ 67.848576] handle_fasteoi_irq+0xc4/0x220 [ 67.848580] __handle_domain_irq+0x80/0xe0 [ 67.848583] gic_handle_irq+0xc0/0x138 [ 67.848585] el1_irq+0xc8/0x180 [ 67.848588] arch_cpu_idle+0x14/0x2c [ 67.848591] default_idle_call+0x40/0x16c [ 67.848594] do_idle+0x1f0/0x250 [ 67.848597] cpu_startup_entry+0x2c/0x60 [ 67.848600] rest_init+0xc0/0xcc [ 67.848603] arch_call_rest_init+0x14/0x1c [ 67.848606] start_kernel+0x4cc/0x500 [ 67.848610] Code: eb0002ff 9a9f12d6 f2fbd5a2 f2fbd5a3 (a94602c1) [ 67.848613] ---[ end trace 585a97036f88203a ]---

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix potential NULL dereference Fix potential NULL dereference, in the case when "man", the resource manager might be NULL, when/if we print debug information.

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_mpls: Fix warning during failed attribute validation The 'TCA_MPLS_LABEL' attribute is of 'NLA_U32' type, but has a validation type of 'NLA_VALIDATE_FUNCTION'. This is an invalid combination according to the comment above 'struct nla_policy': " Meaning of `validate' field, use via NLA_POLICY_VALIDATE_FN: NLA_BINARY Validation function called for the attribute. All other Unused - but note that it's a union " This can trigger the warning [1] in nla_get_range_unsigned() when validation of the attribute fails. Despite being of 'NLA_U32' type, the associated 'min'/'max' fields in the policy are negative as they are aliased by the 'validate' field. Fix by changing the attribute type to 'NLA_BINARY' which is consistent with the above comment and all other users of NLA_POLICY_VALIDATE_FN(). As a result, move the length validation to the validation function. No regressions in MPLS tests: # ./tdc.py -f tc-tests/actions/mpls.json [...] # echo $? 0 [1] WARNING: CPU: 0 PID: 17743 at lib/nlattr.c:118 nla_get_range_unsigned+0x1d8/0x1e0 lib/nlattr.c:117 Modules linked in: CPU: 0 PID: 17743 Comm: syz-executor.0 Not tainted 6.1.0-rc8 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-48-gd9c812dda519-prebuilt.qemu.org 04/01/2014 RIP: 0010:nla_get_range_unsigned+0x1d8/0x1e0 lib/nlattr.c:117 [...] Call Trace: <TASK> __netlink_policy_dump_write_attr+0x23d/0x990 net/netlink/policy.c:310 netlink_policy_dump_write_attr+0x22/0x30 net/netlink/policy.c:411 netlink_ack_tlv_fill net/netlink/af_netlink.c:2454 [inline] netlink_ack+0x546/0x760 net/netlink/af_netlink.c:2506 netlink_rcv_skb+0x1b7/0x240 net/netlink/af_netlink.c:2546 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:6109 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x5e9/0x6b0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x739/0x860 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] ____sys_sendmsg+0x38f/0x500 net/socket.c:2482 ___sys_sendmsg net/socket.c:2536 [inline] __sys_sendmsg+0x197/0x230 net/socket.c:2565 __do_sys_sendmsg net/socket.c:2574 [inline] __se_sys_sendmsg net/socket.c:2572 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2572 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd

In the Linux kernel, the following vulnerability has been resolved: drm/msm: another fix for the headless Adreno GPU Fix another oops reproducible when rebooting the board with the Adreno GPU working in the headless mode (e.g. iMX platforms). Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read [00000000] *pgd=74936831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] ARM CPU: 0 PID: 51 Comm: reboot Not tainted 6.2.0-rc1-dirty #11 Hardware name: Freescale i.MX53 (Device Tree Support) PC is at msm_atomic_commit_tail+0x50/0x970 LR is at commit_tail+0x9c/0x188 pc : [<c06aa430>] lr : [<c067a214>] psr: 600e0013 sp : e0851d30 ip : ee4eb7eb fp : 00090acc r10: 00000058 r9 : c2193014 r8 : c4310000 r7 : c4759380 r6 : 07bef61d r5 : 00000000 r4 : 00000000 r3 : c44cc440 r2 : 00000000 r1 : 00000000 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 74910019 DAC: 00000051 Register r0 information: NULL pointer Register r1 information: NULL pointer Register r2 information: NULL pointer Register r3 information: slab kmalloc-1k start c44cc400 pointer offset 64 size 1024 Register r4 information: NULL pointer Register r5 information: NULL pointer Register r6 information: non-paged memory Register r7 information: slab kmalloc-128 start c4759380 pointer offset 0 size 128 Register r8 information: slab kmalloc-2k start c4310000 pointer offset 0 size 2048 Register r9 information: non-slab/vmalloc memory Register r10 information: non-paged memory Register r11 information: non-paged memory Register r12 information: non-paged memory Process reboot (pid: 51, stack limit = 0xc80046d9) Stack: (0xe0851d30 to 0xe0852000) 1d20: c4759380 fbd77200 000005ff 002b9c70 1d40: c4759380 c4759380 00000000 07bef61d 00000600 c0d6fe7c c2193014 00000058 1d60: 00090acc c067a214 00000000 c4759380 c4310000 00000000 c44cc854 c067a89c 1d80: 00000000 00000000 00000000 c4310468 00000000 c4759380 c4310000 c4310468 1da0: c4310470 c0643258 c4759380 00000000 00000000 c0c4ee24 00000000 c44cc810 1dc0: 00000000 c0c4ee24 00000000 c44cc810 00000000 0347d2a8 e0851e00 e0851e00 1de0: c4759380 c067ad20 c4310000 00000000 c44cc810 c27f8718 c44cc854 c067adb8 1e00: c4933000 00000002 00000001 00000000 00000000 c2130850 00000000 c2130854 1e20: c25fc488 00000000 c0ff162c 00000000 00000001 00000002 00000000 00000000 1e40: c43102c0 c43102c0 00000000 0347d2a8 c44cc810 c44cc814 c2133da8 c06d1a60 1e60: 00000000 00000000 00079028 c2012f24 fee1dead c4933000 00000058 c01431e4 1e80: 01234567 c0143a20 00000000 00000000 00000000 00000000 00000000 00000000 1ea0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1ec0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1ee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1f00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1f20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1f40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1f60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1f80: 00000000 00000000 00000000 0347d2a8 00000002 00000004 00000078 00000058 1fa0: c010028c c0100060 00000002 00000004 fee1dead 28121969 01234567 00079028 1fc0: 00000002 00000004 00000078 00000058 0002fdc5 00000000 00000000 00090acc 1fe0: 00000058 becc9c64 b6e97e05 b6e0e5f6 600e0030 fee1dead 00000000 00000000 msm_atomic_commit_tail from commit_tail+0x9c/0x188 commit_tail from drm_atomic_helper_commit+0x160/0x188 drm_atomic_helper_commit from drm_atomic_commit+0xac/0xe0 drm_atomic_commit from drm_atomic_helper_disable_all+0x1b0/0x1c0 drm_atomic_helper_disable_all from drm_atomic_helper_shutdown+0x88/0x140 drm_atomic_helper_shutdown from device_shutdown+0x16c/0x240 device_shutdown from kernel_restart+0x38/0x90 kernel_restart from __do_sys_reboot+0x ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fixed bug on error when unloading amdgpu Fixed bug on error when unloading amdgpu. The error message is as follows: [ 377.706202] kernel BUG at drivers/gpu/drm/drm_buddy.c:278! [ 377.706215] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 377.706222] CPU: 4 PID: 8610 Comm: modprobe Tainted: G IOE 6.0.0-thomas #1 [ 377.706231] Hardware name: ASUS System Product Name/PRIME Z390-A, BIOS 2004 11/02/2021 [ 377.706238] RIP: 0010:drm_buddy_free_block+0x26/0x30 [drm_buddy] [ 377.706264] Code: 00 00 00 90 0f 1f 44 00 00 48 8b 0e 89 c8 25 00 0c 00 00 3d 00 04 00 00 75 10 48 8b 47 18 48 d3 e0 48 01 47 28 e9 fa fe ff ff <0f> 0b 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 54 55 48 89 f5 53 [ 377.706282] RSP: 0018:ffffad2dc4683cb8 EFLAGS: 00010287 [ 377.706289] RAX: 0000000000000000 RBX: ffff8b1743bd5138 RCX: 0000000000000000 [ 377.706297] RDX: ffff8b1743bd5160 RSI: ffff8b1743bd5c78 RDI: ffff8b16d1b25f70 [ 377.706304] RBP: ffff8b1743bd59e0 R08: 0000000000000001 R09: 0000000000000001 [ 377.706311] R10: ffff8b16c8572400 R11: ffffad2dc4683cf0 R12: ffff8b16d1b25f70 [ 377.706318] R13: ffff8b16d1b25fd0 R14: ffff8b1743bd59c0 R15: ffff8b16d1b25f70 [ 377.706325] FS: 00007fec56c72c40(0000) GS:ffff8b1836500000(0000) knlGS:0000000000000000 [ 377.706334] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 377.706340] CR2: 00007f9b88c1ba50 CR3: 0000000110450004 CR4: 00000000003706e0 [ 377.706347] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 377.706354] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 377.706361] Call Trace: [ 377.706365] <TASK> [ 377.706369] drm_buddy_free_list+0x2a/0x60 [drm_buddy] [ 377.706376] amdgpu_vram_mgr_fini+0xea/0x180 [amdgpu] [ 377.706572] amdgpu_ttm_fini+0x12e/0x1a0 [amdgpu] [ 377.706650] amdgpu_bo_fini+0x22/0x90 [amdgpu] [ 377.706727] gmc_v11_0_sw_fini+0x26/0x30 [amdgpu] [ 377.706821] amdgpu_device_fini_sw+0xa1/0x3c0 [amdgpu] [ 377.706897] amdgpu_driver_release_kms+0x12/0x30 [amdgpu] [ 377.706975] drm_dev_release+0x20/0x40 [drm] [ 377.707006] release_nodes+0x35/0xb0 [ 377.707014] devres_release_all+0x8b/0xc0 [ 377.707020] device_unbind_cleanup+0xe/0x70 [ 377.707027] device_release_driver_internal+0xee/0x160 [ 377.707033] driver_detach+0x44/0x90 [ 377.707039] bus_remove_driver+0x55/0xe0 [ 377.707045] pci_unregister_driver+0x3b/0x90 [ 377.707052] amdgpu_exit+0x11/0x6c [amdgpu] [ 377.707194] __x64_sys_delete_module+0x142/0x2b0 [ 377.707201] ? fpregs_assert_state_consistent+0x22/0x50 [ 377.707208] ? exit_to_user_mode_prepare+0x3e/0x190 [ 377.707215] do_syscall_64+0x38/0x90 [ 377.707221] entry_SYSCALL_64_after_hwframe+0x63/0xcd

In the Linux kernel, the following vulnerability has been resolved: drm/i915/gt: Cleanup partial engine discovery failures If we abort driver initialisation in the middle of gt/engine discovery, some engines will be fully setup and some not. Those incompletely setup engines only have 'engine->release == NULL' and so will leak any of the common objects allocated. v2: - Drop the destroy_pinned_context() helper for now. It's not really worth it with just a single callsite at the moment. (Janusz)

In the Linux kernel, the following vulnerability has been resolved: vhost/vsock: always initialize seqpacket_allow There are two issues around seqpacket_allow: 1. seqpacket_allow is not initialized when socket is created. Thus if features are never set, it will be read uninitialized. 2. if VIRTIO_VSOCK_F_SEQPACKET is set and then cleared, then seqpacket_allow will not be cleared appropriately (existing apps I know about don't usually do this but it's legal and there's no way to be sure no one relies on this). To fix: - initialize seqpacket_allow after allocation - set it unconditionally in set_features

In the Linux kernel, the following vulnerability has been resolved: PCI: rcar: Demote WARN() to dev_warn_ratelimited() in rcar_pcie_wakeup() Avoid large backtrace, it is sufficient to warn the user that there has been a link problem. Either the link has failed and the system is in need of maintenance, or the link continues to work and user has been informed. The message from the warning can be looked up in the sources. This makes an actual link issue less verbose. First of all, this controller has a limitation in that the controller driver has to assist the hardware with transition to L1 link state by writing L1IATN to PMCTRL register, the L1 and L0 link state switching is not fully automatic on this controller. In case of an ASMedia ASM1062 PCIe SATA controller which does not support ASPM, on entry to suspend or during platform pm_test, the SATA controller enters D3hot state and the link enters L1 state. If the SATA controller wakes up before rcar_pcie_wakeup() was called and returns to D0, the link returns to L0 before the controller driver even started its transition to L1 link state. At this point, the SATA controller did send an PM_ENTER_L1 DLLP to the PCIe controller and the PCIe controller received it, and the PCIe controller did set PMSR PMEL1RX bit. Once rcar_pcie_wakeup() is called, if the link is already back in L0 state and PMEL1RX bit is set, the controller driver has no way to determine if it should perform the link transition to L1 state, or treat the link as if it is in L0 state. Currently the driver attempts to perform the transition to L1 link state unconditionally, which in this specific case fails with a PMSR L1FAEG poll timeout, however the link still works as it is already back in L0 state. Reduce this warning verbosity. In case the link is really broken, the rcar_pcie_config_access() would fail, otherwise it will succeed and any system with this controller and ASM1062 can suspend without generating a backtrace.

In the Linux kernel, the following vulnerability has been resolved: media: pci: ivtv: Add check for DMA map result In case DMA fails, 'dma->SG_length' is 0. This value is later used to access 'dma->SGarray[dma->SG_length - 1]', which will cause out of bounds access. Add check to return early on invalid value. Adjust warnings accordingly. Found by Linux Verification Center (linuxtesting.org) with SVACE.

squirrellyjs squirrelly v9.0.0 and fixed in v.9.0.1 was discovered to contain a code injection vulnerability via the component options.varName.

An Unrestricted file upload vulnerability was found in "/music/ajax.php?action=signup" of Kashipara Music Management System v1.0, which allows attackers to execute arbitrary code via uploading a crafted PHP file.

An Unrestricted file upload vulnerability was found in "/music/ajax.php?action=save_playlist" in Kashipara Music Management System v1.0. This allows attackers to execute arbitrary code via uploading a crafted PHP file.

An Unrestricted file upload vulnerability was found in "/music/ajax.php?action=save_music" in Kashipara Music Management System v1.0. This allows attackers to execute arbitrary code via uploading a crafted PHP file.

An Unrestricted file upload vulnerability was found in "/music/ajax.php?action=save_genre" in Kashipara Music Management System v1.0. This allows attackers to execute arbitrary code via uploading a crafted PHP file.

A SQL injection vulnerability in "/music/ajax.php?action=login" of Kashipara Music Management System v1.0 allows remote attackers to execute arbitrary SQL commands and bypass Login via the email parameter.

Kashipara Music Management System v1.0 is vulnerable to SQL Injection via /music/manage_playlist_items.php. An attacker can execute arbitrary SQL commands via the "pid" parameter.

A SQL injection vulnerability in "/music/controller.php?page=view_music" in Kashipara Music Management System v1.0 allows an attacker to execute arbitrary SQL commands via the "id" parameter.

A SQL injection vulnerability in /music/index.php?page=view_playlist in Kashipara Music Management System v1.0 allows an attacker to execute arbitrary SQL commands via the "id" parameter.

A SQL injection vulnerability in "/music/view_user.php" in Kashipara Music Management System v1.0 allows an attacker to execute arbitrary SQL commands via the "id" parameter of View User Profile Page.

A cross-site scripting (XSS) vulnerability in the component /index/index.html of YZNCMS v1.4.2 allows attackers to execute arbitrary web scripts or HTML via a crafted payload injected into the configured remarks text field.

An issue in the downloader.php component of TOSEI online store management system v4.02, v4.03, and v4.04 allows attackers to execute a directory traversal.

DrayTek Vigor 3900 before v1.5.1.5_Beta, DrayTek Vigor 2960 before v1.5.1.5_Beta and DrayTek Vigor 300B before v1.5.1.5_Beta were discovered to contain a command injection vulnerability via the action parameter at cgi-bin/mainfunction.cgi.

In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: Clean up error handling in vpci_scan_bus() Smatch complains about inconsistent NULL checking in vpci_scan_bus(): drivers/pci/endpoint/functions/pci-epf-vntb.c:1024 vpci_scan_bus() error: we previously assumed 'vpci_bus' could be null (see line 1021) Instead of printing an error message and then crashing we should return an error code and clean up. Also the NULL check is reversed so it prints an error for success instead of failure.

In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix soft lockup under heavy CEQE load CEQEs are handled in interrupt handler currently. This may cause the CPU core staying in interrupt context too long and lead to soft lockup under heavy load. Handle CEQEs in BH workqueue and set an upper limit for the number of CEQE handled by a single call of work handler.

In the Linux kernel, the following vulnerability has been resolved: devres: Fix memory leakage caused by driver API devm_free_percpu() It will cause memory leakage when use driver API devm_free_percpu() to free memory allocated by devm_alloc_percpu(), fixed by using devres_release() instead of devres_destroy() within devm_free_percpu().

In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Fix null pointer dereference in __sev_snp_shutdown_locked Fix a null pointer dereference induced by DEBUG_TEST_DRIVER_REMOVE. Return from __sev_snp_shutdown_locked() if the psp_device or the sev_device structs are not initialized. Without the fix, the driver will produce the following splat: ccp 0000:55:00.5: enabling device (0000 -> 0002) ccp 0000:55:00.5: sev enabled ccp 0000:55:00.5: psp enabled BUG: kernel NULL pointer dereference, address: 00000000000000f0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC NOPTI CPU: 262 PID: 1 Comm: swapper/0 Not tainted 6.9.0-rc1+ #29 RIP: 0010:__sev_snp_shutdown_locked+0x2e/0x150 Code: 00 55 48 89 e5 41 57 41 56 41 54 53 48 83 ec 10 41 89 f7 49 89 fe 65 48 8b 04 25 28 00 00 00 48 89 45 d8 48 8b 05 6a 5a 7f 06 <4c> 8b a0 f0 00 00 00 41 0f b6 9c 24 a2 00 00 00 48 83 fb 02 0f 83 RSP: 0018:ffffb2ea4014b7b8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff9e4acd2e0a28 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb2ea4014b808 RBP: ffffb2ea4014b7e8 R08: 0000000000000106 R09: 000000000003d9c0 R10: 0000000000000001 R11: ffffffffa39ff070 R12: ffff9e49d40590c8 R13: 0000000000000000 R14: ffffb2ea4014b808 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff9e58b1e00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000f0 CR3: 0000000418a3e001 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> ? __die_body+0x6f/0xb0 ? __die+0xcc/0xf0 ? page_fault_oops+0x330/0x3a0 ? save_trace+0x2a5/0x360 ? do_user_addr_fault+0x583/0x630 ? exc_page_fault+0x81/0x120 ? asm_exc_page_fault+0x2b/0x30 ? __sev_snp_shutdown_locked+0x2e/0x150 __sev_firmware_shutdown+0x349/0x5b0 ? pm_runtime_barrier+0x66/0xe0 sev_dev_destroy+0x34/0xb0 psp_dev_destroy+0x27/0x60 sp_destroy+0x39/0x90 sp_pci_remove+0x22/0x60 pci_device_remove+0x4e/0x110 really_probe+0x271/0x4e0 __driver_probe_device+0x8f/0x160 driver_probe_device+0x24/0x120 __driver_attach+0xc7/0x280 ? driver_attach+0x30/0x30 bus_for_each_dev+0x10d/0x130 driver_attach+0x22/0x30 bus_add_driver+0x171/0x2b0 ? unaccepted_memory_init_kdump+0x20/0x20 driver_register+0x67/0x100 __pci_register_driver+0x83/0x90 sp_pci_init+0x22/0x30 sp_mod_init+0x13/0x30 do_one_initcall+0xb8/0x290 ? sched_clock_noinstr+0xd/0x10 ? local_clock_noinstr+0x3e/0x100 ? stack_depot_save_flags+0x21e/0x6a0 ? local_clock+0x1c/0x60 ? stack_depot_save_flags+0x21e/0x6a0 ? sched_clock_noinstr+0xd/0x10 ? local_clock_noinstr+0x3e/0x100 ? __lock_acquire+0xd90/0xe30 ? sched_clock_noinstr+0xd/0x10 ? local_clock_noinstr+0x3e/0x100 ? __create_object+0x66/0x100 ? local_clock+0x1c/0x60 ? __create_object+0x66/0x100 ? parameq+0x1b/0x90 ? parse_one+0x6d/0x1d0 ? parse_args+0xd7/0x1f0 ? do_initcall_level+0x180/0x180 do_initcall_level+0xb0/0x180 do_initcalls+0x60/0xa0 ? kernel_init+0x1f/0x1d0 do_basic_setup+0x41/0x50 kernel_init_freeable+0x1ac/0x230 ? rest_init+0x1f0/0x1f0 kernel_init+0x1f/0x1d0 ? rest_init+0x1f0/0x1f0 ret_from_fork+0x3d/0x50 ? rest_init+0x1f0/0x1f0 ret_from_fork_asm+0x11/0x20 </TASK> Modules linked in: CR2: 00000000000000f0 ---[ end trace 0000000000000000 ]--- RIP: 0010:__sev_snp_shutdown_locked+0x2e/0x150 Code: 00 55 48 89 e5 41 57 41 56 41 54 53 48 83 ec 10 41 89 f7 49 89 fe 65 48 8b 04 25 28 00 00 00 48 89 45 d8 48 8b 05 6a 5a 7f 06 <4c> 8b a0 f0 00 00 00 41 0f b6 9c 24 a2 00 00 00 48 83 fb 02 0f 83 RSP: 0018:ffffb2ea4014b7b8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff9e4acd2e0a28 RCX: 0000000000000000 RDX: 0000000 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: xfrm: Fix input error path memory access When there is a misconfiguration of input state slow path KASAN report error. Fix this error. west login: [ 52.987278] eth1: renamed from veth11 [ 53.078814] eth1: renamed from veth21 [ 53.181355] eth1: renamed from veth31 [ 54.921702] ================================================================== [ 54.922602] BUG: KASAN: wild-memory-access in xfrmi_rcv_cb+0x2d/0x295 [ 54.923393] Read of size 8 at addr 6b6b6b6b00000000 by task ping/512 [ 54.924169] [ 54.924386] CPU: 0 PID: 512 Comm: ping Not tainted 6.9.0-08574-gcd29a4313a1b #25 [ 54.925290] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 54.926401] Call Trace: [ 54.926731] <IRQ> [ 54.927009] dump_stack_lvl+0x2a/0x3b [ 54.927478] kasan_report+0x84/0xa6 [ 54.927930] ? xfrmi_rcv_cb+0x2d/0x295 [ 54.928410] xfrmi_rcv_cb+0x2d/0x295 [ 54.928872] ? xfrm4_rcv_cb+0x3d/0x5e [ 54.929354] xfrm4_rcv_cb+0x46/0x5e [ 54.929804] xfrm_rcv_cb+0x7e/0xa1 [ 54.930240] xfrm_input+0x1b3a/0x1b96 [ 54.930715] ? xfrm_offload+0x41/0x41 [ 54.931182] ? raw_rcv+0x292/0x292 [ 54.931617] ? nf_conntrack_confirm+0xa2/0xa2 [ 54.932158] ? skb_sec_path+0xd/0x3f [ 54.932610] ? xfrmi_input+0x90/0xce [ 54.933066] xfrm4_esp_rcv+0x33/0x54 [ 54.933521] ip_protocol_deliver_rcu+0xd7/0x1b2 [ 54.934089] ip_local_deliver_finish+0x110/0x120 [ 54.934659] ? ip_protocol_deliver_rcu+0x1b2/0x1b2 [ 54.935248] NF_HOOK.constprop.0+0xf8/0x138 [ 54.935767] ? ip_sublist_rcv_finish+0x68/0x68 [ 54.936317] ? secure_tcpv6_ts_off+0x23/0x168 [ 54.936859] ? ip_protocol_deliver_rcu+0x1b2/0x1b2 [ 54.937454] ? __xfrm_policy_check2.constprop.0+0x18d/0x18d [ 54.938135] NF_HOOK.constprop.0+0xf8/0x138 [ 54.938663] ? ip_sublist_rcv_finish+0x68/0x68 [ 54.939220] ? __xfrm_policy_check2.constprop.0+0x18d/0x18d [ 54.939904] ? ip_local_deliver_finish+0x120/0x120 [ 54.940497] __netif_receive_skb_one_core+0xc9/0x107 [ 54.941121] ? __netif_receive_skb_list_core+0x1c2/0x1c2 [ 54.941771] ? blk_mq_start_stopped_hw_queues+0xc7/0xf9 [ 54.942413] ? blk_mq_start_stopped_hw_queue+0x38/0x38 [ 54.943044] ? virtqueue_get_buf_ctx+0x295/0x46b [ 54.943618] process_backlog+0xb3/0x187 [ 54.944102] __napi_poll.constprop.0+0x57/0x1a7 [ 54.944669] net_rx_action+0x1cb/0x380 [ 54.945150] ? __napi_poll.constprop.0+0x1a7/0x1a7 [ 54.945744] ? vring_new_virtqueue+0x17a/0x17a [ 54.946300] ? note_interrupt+0x2cd/0x367 [ 54.946805] handle_softirqs+0x13c/0x2c9 [ 54.947300] do_softirq+0x5f/0x7d [ 54.947727] </IRQ> [ 54.948014] <TASK> [ 54.948300] __local_bh_enable_ip+0x48/0x62 [ 54.948832] __neigh_event_send+0x3fd/0x4ca [ 54.949361] neigh_resolve_output+0x1e/0x210 [ 54.949896] ip_finish_output2+0x4bf/0x4f0 [ 54.950410] ? __ip_finish_output+0x171/0x1b8 [ 54.950956] ip_send_skb+0x25/0x57 [ 54.951390] raw_sendmsg+0xf95/0x10c0 [ 54.951850] ? check_new_pages+0x45/0x71 [ 54.952343] ? raw_hash_sk+0x21b/0x21b [ 54.952815] ? kernel_init_pages+0x42/0x51 [ 54.953337] ? prep_new_page+0x44/0x51 [ 54.953811] ? get_page_from_freelist+0x72b/0x915 [ 54.954390] ? signal_pending_state+0x77/0x77 [ 54.954936] ? preempt_count_sub+0x14/0xb3 [ 54.955450] ? __might_resched+0x8a/0x240 [ 54.955951] ? __might_sleep+0x25/0xa0 [ 54.956424] ? first_zones_zonelist+0x2c/0x43 [ 54.956977] ? __rcu_read_lock+0x2d/0x3a [ 54.957476] ? __pte_offset_map+0x32/0xa4 [ 54.957980] ? __might_resched+0x8a/0x240 [ 54.958483] ? __might_sleep+0x25/0xa0 [ 54.958963] ? inet_send_prepare+0x54/0x54 [ 54.959478] ? sock_sendmsg_nosec+0x42/0x6c [ 54.960000] sock_sendmsg_nosec+0x42/0x6c [ 54.960502] __sys_sendto+0x15d/0x1cc [ 54.960966] ? __x64_sys_getpeername+0x44/0x44 [ 54.961522] ? __handle_mm_fault+0x679/0xae4 [ 54.962068] ? find_vma+0x6b/0x ---truncated---

DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was withdrawn by its CNA. Further investigation showed that it was not a security issue. Notes: none.

This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

Out of bounds memory access in Skia in Google Chrome prior to 128.0.6613.84 allowed a remote attacker who had compromised the renderer process to perform out of bounds memory access via a crafted HTML page. (Chromium security severity: High)

In the Linux kernel, the following vulnerability has been resolved: platform/surface: aggregator: Add missing call to ssam_request_sync_free() Although rare, ssam_request_sync_init() can fail. In that case, the request should be freed via ssam_request_sync_free(). Currently it is leaked instead. Fix this.

In the Linux kernel, the following vulnerability has been resolved: scsi: storvsc: Fix swiotlb bounce buffer leak in confidential VM storvsc_queuecommand() maps the scatter/gather list using scsi_dma_map(), which in a confidential VM allocates swiotlb bounce buffers. If the I/O submission fails in storvsc_do_io(), the I/O is typically retried by higher level code, but the bounce buffer memory is never freed. The mostly like cause of I/O submission failure is a full VMBus channel ring buffer, which is not uncommon under high I/O loads. Eventually enough bounce buffer memory leaks that the confidential VM can't do any I/O. The same problem can arise in a non-confidential VM with kernel boot parameter swiotlb=force. Fix this by doing scsi_dma_unmap() in the case of an I/O submission error, which frees the bounce buffer memory.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Let probe fail when workqueue cannot be enabled The workqueue is enabled when the appropriate driver is loaded and disabled when the driver is removed. When the driver is removed it assumes that the workqueue was enabled successfully and proceeds to free allocations made during workqueue enabling. Failure during workqueue enabling does not prevent the driver from being loaded. This is because the error path within drv_enable_wq() returns success unless a second failure is encountered during the error path. By returning success it is possible to load the driver even if the workqueue cannot be enabled and allocations that do not exist are attempted to be freed during driver remove. Some examples of problematic flows: (a) idxd_dmaengine_drv_probe() -> drv_enable_wq() -> idxd_wq_request_irq(): In above flow, if idxd_wq_request_irq() fails then idxd_wq_unmap_portal() is called on error exit path, but drv_enable_wq() returns 0 because idxd_wq_disable() succeeds. The driver is thus loaded successfully. idxd_dmaengine_drv_remove()->drv_disable_wq()->idxd_wq_unmap_portal() Above flow on driver unload triggers the WARN in devm_iounmap() because the device resource has already been removed during error path of drv_enable_wq(). (b) idxd_dmaengine_drv_probe() -> drv_enable_wq() -> idxd_wq_request_irq(): In above flow, if idxd_wq_request_irq() fails then idxd_wq_init_percpu_ref() is never called to initialize the percpu counter, yet the driver loads successfully because drv_enable_wq() returns 0. idxd_dmaengine_drv_remove()->__idxd_wq_quiesce()->percpu_ref_kill(): Above flow on driver unload triggers a BUG when attempting to drop the initial ref of the uninitialized percpu ref: BUG: kernel NULL pointer dereference, address: 0000000000000010 Fix the drv_enable_wq() error path by returning the original error that indicates failure of workqueue enabling. This ensures that the probe fails when an error is encountered and the driver remove paths are only attempted when the workqueue was enabled successfully.

In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: Don't remove map on creater_process and device_release Do not remove the map from the list on error path in fastrpc_init_create_process, instead call fastrpc_map_put, to avoid use-after-free. Do not remove it on fastrpc_device_release either, call fastrpc_map_put instead. The fastrpc_free_map is the only proper place to remove the map. This is called only after the reference count is 0.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_qca: Fix driver shutdown on closed serdev The driver shutdown callback (which sends EDL_SOC_RESET to the device over serdev) should not be invoked when HCI device is not open (e.g. if hci_dev_open_sync() failed), because the serdev and its TTY are not open either. Also skip this step if device is powered off (qca_power_shutdown()). The shutdown callback causes use-after-free during system reboot with Qualcomm Atheros Bluetooth: Unable to handle kernel paging request at virtual address 0072662f67726fd7 ... CPU: 6 PID: 1 Comm: systemd-shutdow Tainted: G W 6.1.0-rt5-00325-g8a5f56bcfcca #8 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) Call trace: tty_driver_flush_buffer+0x4/0x30 serdev_device_write_flush+0x24/0x34 qca_serdev_shutdown+0x80/0x130 [hci_uart] device_shutdown+0x15c/0x260 kernel_restart+0x48/0xac KASAN report: BUG: KASAN: use-after-free in tty_driver_flush_buffer+0x1c/0x50 Read of size 8 at addr ffff16270c2e0018 by task systemd-shutdow/1 CPU: 7 PID: 1 Comm: systemd-shutdow Not tainted 6.1.0-next-20221220-00014-gb85aaf97fb01-dirty #28 Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) Call trace: dump_backtrace.part.0+0xdc/0xf0 show_stack+0x18/0x30 dump_stack_lvl+0x68/0x84 print_report+0x188/0x488 kasan_report+0xa4/0xf0 __asan_load8+0x80/0xac tty_driver_flush_buffer+0x1c/0x50 ttyport_write_flush+0x34/0x44 serdev_device_write_flush+0x48/0x60 qca_serdev_shutdown+0x124/0x274 device_shutdown+0x1e8/0x350 kernel_restart+0x48/0xb0 __do_sys_reboot+0x244/0x2d0 __arm64_sys_reboot+0x54/0x70 invoke_syscall+0x60/0x190 el0_svc_common.constprop.0+0x7c/0x160 do_el0_svc+0x44/0xf0 el0_svc+0x2c/0x6c el0t_64_sync_handler+0xbc/0x140 el0t_64_sync+0x190/0x194

In the Linux kernel, the following vulnerability has been resolved: efi: fix NULL-deref in init error path In cases where runtime services are not supported or have been disabled, the runtime services workqueue will never have been allocated. Do not try to destroy the workqueue unconditionally in the unlikely event that EFI initialisation fails to avoid dereferencing a NULL pointer.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix macsec possible null dereference when updating MAC security entity (SecY) Upon updating MAC security entity (SecY) in hw offload path, the macsec security association (SA) initialization routine is called. In case of extended packet number (epn) is enabled the salt and ssci attributes are retrieved using the MACsec driver rx_sa context which is unavailable when updating a SecY property such as encoding-sa hence the null dereference. Fix by using the provided SA to set those attributes.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix command stats access after free Command may fail while driver is reloading and can't accept FW commands till command interface is reinitialized. Such command failure is being logged to command stats. This results in NULL pointer access as command stats structure is being freed and reallocated during mlx5 devlink reload (see kernel log below). Fix it by making command stats statically allocated on driver probe. Kernel log: [ 2394.808802] BUG: unable to handle kernel paging request at 000000000002a9c0 [ 2394.810610] PGD 0 P4D 0 [ 2394.811811] Oops: 0002 [#1] SMP NOPTI ... [ 2394.815482] RIP: 0010:native_queued_spin_lock_slowpath+0x183/0x1d0 ... [ 2394.829505] Call Trace: [ 2394.830667] _raw_spin_lock_irq+0x23/0x26 [ 2394.831858] cmd_status_err+0x55/0x110 [mlx5_core] [ 2394.833020] mlx5_access_reg+0xe7/0x150 [mlx5_core] [ 2394.834175] mlx5_query_port_ptys+0x78/0xa0 [mlx5_core] [ 2394.835337] mlx5e_ethtool_get_link_ksettings+0x74/0x590 [mlx5_core] [ 2394.836454] ? kmem_cache_alloc_trace+0x140/0x1c0 [ 2394.837562] __rh_call_get_link_ksettings+0x33/0x100 [ 2394.838663] ? __rtnl_unlock+0x25/0x50 [ 2394.839755] __ethtool_get_link_ksettings+0x72/0x150 [ 2394.840862] duplex_show+0x6e/0xc0 [ 2394.841963] dev_attr_show+0x1c/0x40 [ 2394.843048] sysfs_kf_seq_show+0x9b/0x100 [ 2394.844123] seq_read+0x153/0x410 [ 2394.845187] vfs_read+0x91/0x140 [ 2394.846226] ksys_read+0x4f/0xb0 [ 2394.847234] do_syscall_64+0x5b/0x1a0 [ 2394.848228] entry_SYSCALL_64_after_hwframe+0x65/0xca