CVE Feed

In the Linux kernel, the following vulnerability has been resolved: platform/chrome: cros_ec_uart: properly fix race condition The cros_ec_uart_probe() function calls devm_serdev_device_open() before it calls serdev_device_set_client_ops(). This can trigger a NULL pointer dereference: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... Call Trace: <TASK> ... ? ttyport_receive_buf A simplified version of crashing code is as follows: static inline size_t serdev_controller_receive_buf(struct serdev_controller *ctrl, const u8 *data, size_t count) { struct serdev_device *serdev = ctrl->serdev; if (!serdev || !serdev->ops->receive_buf) // CRASH! return 0; return serdev->ops->receive_buf(serdev, data, count); } It assumes that if SERPORT_ACTIVE is set and serdev exists, serdev->ops will also exist. This conflicts with the existing cros_ec_uart_probe() logic, as it first calls devm_serdev_device_open() (which sets SERPORT_ACTIVE), and only later sets serdev->ops via serdev_device_set_client_ops(). Commit 01f95d42b8f4 ("platform/chrome: cros_ec_uart: fix race condition") attempted to fix a similar race condition, but while doing so, made the window of error for this race condition to happen much wider. Attempt to fix the race condition again, making sure we fully setup before calling devm_serdev_device_open().

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Fix oops during rmmod on single-CPU platforms During the removal of the idxd driver, registered offline callback is invoked as part of the clean up process. However, on systems with only one CPU online, no valid target is available to migrate the perf context, resulting in a kernel oops: BUG: unable to handle page fault for address: 000000000002a2b8 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 1470e1067 P4D 0 Oops: 0002 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 20 Comm: cpuhp/0 Not tainted 6.8.0-rc6-dsa+ #57 Hardware name: Intel Corporation AvenueCity/AvenueCity, BIOS BHSDCRB1.86B.2492.D03.2307181620 07/18/2023 RIP: 0010:mutex_lock+0x2e/0x50 ... Call Trace: <TASK> __die+0x24/0x70 page_fault_oops+0x82/0x160 do_user_addr_fault+0x65/0x6b0 __pfx___rdmsr_safe_on_cpu+0x10/0x10 exc_page_fault+0x7d/0x170 asm_exc_page_fault+0x26/0x30 mutex_lock+0x2e/0x50 mutex_lock+0x1e/0x50 perf_pmu_migrate_context+0x87/0x1f0 perf_event_cpu_offline+0x76/0x90 [idxd] cpuhp_invoke_callback+0xa2/0x4f0 __pfx_perf_event_cpu_offline+0x10/0x10 [idxd] cpuhp_thread_fun+0x98/0x150 smpboot_thread_fn+0x27/0x260 smpboot_thread_fn+0x1af/0x260 __pfx_smpboot_thread_fn+0x10/0x10 kthread+0x103/0x140 __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x50 __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 <TASK> Fix the issue by preventing the migration of the perf context to an invalid target.

In the Linux kernel, the following vulnerability has been resolved: i2c: smbus: fix NULL function pointer dereference Baruch reported an OOPS when using the designware controller as target only. Target-only modes break the assumption of one transfer function always being available. Fix this by always checking the pointer in __i2c_transfer. [wsa: dropped the simplification in core-smbus to avoid theoretical regressions]

In the Linux kernel, the following vulnerability has been resolved: smb3: fix lock ordering potential deadlock in cifs_sync_mid_result Coverity spotted that the cifs_sync_mid_result function could deadlock "Thread deadlock (ORDER_REVERSAL) lock_order: Calling spin_lock acquires lock TCP_Server_Info.srv_lock while holding lock TCP_Server_Info.mid_lock" Addresses-Coverity: 1590401 ("Thread deadlock (ORDER_REVERSAL)")

In the Linux kernel, the following vulnerability has been resolved: dpll: fix dpll_pin_on_pin_register() for multiple parent pins In scenario where pin is registered with multiple parent pins via dpll_pin_on_pin_register(..), all belonging to the same dpll device. A second call to dpll_pin_on_pin_unregister(..) would cause a call trace, as it tries to use already released registration resources (due to fix introduced in b446631f355e). In this scenario pin was registered twice, so resources are not yet expected to be release until each registered pin/pin pair is unregistered. Currently, the following crash/call trace is produced when ice driver is removed on the system with installed E810T NIC which includes dpll device: WARNING: CPU: 51 PID: 9155 at drivers/dpll/dpll_core.c:809 dpll_pin_ops+0x20/0x30 RIP: 0010:dpll_pin_ops+0x20/0x30 Call Trace: ? __warn+0x7f/0x130 ? dpll_pin_ops+0x20/0x30 dpll_msg_add_pin_freq+0x37/0x1d0 dpll_cmd_pin_get_one+0x1c0/0x400 ? __nlmsg_put+0x63/0x80 dpll_pin_event_send+0x93/0x140 dpll_pin_on_pin_unregister+0x3f/0x100 ice_dpll_deinit_pins+0xa1/0x230 [ice] ice_remove+0xf1/0x210 [ice] Fix by adding a parent pointer as a cookie when creating a registration, also when searching for it. For the regular pins pass NULL, this allows to create separated registration for each parent the pin is registered with.

In the Linux kernel, the following vulnerability has been resolved: drm/ast: Fix soft lockup There is a while-loop in ast_dp_set_on_off() that could lead to infinite-loop. This is because the register, VGACRI-Dx, checked in this API is a scratch register actually controlled by a MCU, named DPMCU, in BMC. These scratch registers are protected by scu-lock. If suc-lock is not off, DPMCU can not update these registers and then host will have soft lockup due to never updated status. DPMCU is used to control DP and relative registers to handshake with host's VGA driver. Even the most time-consuming task, DP's link training, is less than 100ms. 200ms should be enough.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Register devlink first under devlink lock In case device is having a non fatal FW error during probe, the driver will report the error to user via devlink. This will trigger a WARN_ON, since mlx5 is calling devlink_register() last. In order to avoid the WARN_ON[1], change mlx5 to invoke devl_register() first under devlink lock. [1] WARNING: CPU: 5 PID: 227 at net/devlink/health.c:483 devlink_recover_notify.constprop.0+0xb8/0xc0 CPU: 5 PID: 227 Comm: kworker/u16:3 Not tainted 6.4.0-rc5_for_upstream_min_debug_2023_06_12_12_38 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5_health0000:08:00.0 mlx5_fw_reporter_err_work [mlx5_core] RIP: 0010:devlink_recover_notify.constprop.0+0xb8/0xc0 Call Trace: <TASK> ? __warn+0x79/0x120 ? devlink_recover_notify.constprop.0+0xb8/0xc0 ? report_bug+0x17c/0x190 ? handle_bug+0x3c/0x60 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? devlink_recover_notify.constprop.0+0xb8/0xc0 devlink_health_report+0x4a/0x1c0 mlx5_fw_reporter_err_work+0xa4/0xd0 [mlx5_core] process_one_work+0x1bb/0x3c0 ? process_one_work+0x3c0/0x3c0 worker_thread+0x4d/0x3c0 ? process_one_work+0x3c0/0x3c0 kthread+0xc6/0xf0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 </TASK>

In the Linux kernel, the following vulnerability has been resolved: mm: turn folio_test_hugetlb into a PageType The current folio_test_hugetlb() can be fooled by a concurrent folio split into returning true for a folio which has never belonged to hugetlbfs. This can't happen if the caller holds a refcount on it, but we have a few places (memory-failure, compaction, procfs) which do not and should not take a speculative reference. Since hugetlb pages do not use individual page mapcounts (they are always fully mapped and use the entire_mapcount field to record the number of mappings), the PageType field is available now that page_mapcount() ignores the value in this field. In compaction and with CONFIG_DEBUG_VM enabled, the current implementation can result in an oops, as reported by Luis. This happens since 9c5ccf2db04b ("mm: remove HUGETLB_PAGE_DTOR") effectively added some VM_BUG_ON() checks in the PageHuge() testing path. [[email protected]: update vmcoreinfo]

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: Convert spinlock to mutex to lock evl workqueue drain_workqueue() cannot be called safely in a spinlocked context due to possible task rescheduling. In the multi-task scenario, calling queue_work() while drain_workqueue() will lead to a Call Trace as pushing a work on a draining workqueue is not permitted in spinlocked context. Call Trace: <TASK> ? __warn+0x7d/0x140 ? __queue_work+0x2b2/0x440 ? report_bug+0x1f8/0x200 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? __queue_work+0x2b2/0x440 queue_work_on+0x28/0x30 idxd_misc_thread+0x303/0x5a0 [idxd] ? __schedule+0x369/0xb40 ? __pfx_irq_thread_fn+0x10/0x10 ? irq_thread+0xbc/0x1b0 irq_thread_fn+0x21/0x70 irq_thread+0x102/0x1b0 ? preempt_count_add+0x74/0xa0 ? __pfx_irq_thread_dtor+0x10/0x10 ? __pfx_irq_thread+0x10/0x10 kthread+0x103/0x140 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> The current implementation uses a spinlock to protect event log workqueue and will lead to the Call Trace due to potential task rescheduling. To address the locking issue, convert the spinlock to mutex, allowing the drain_workqueue() to be called in a safe mutex-locked context. This change ensures proper synchronization when accessing the event log workqueue, preventing potential Call Trace and improving the overall robustness of the code.

In the Linux kernel, the following vulnerability has been resolved: block: fix q->blkg_list corruption during disk rebind Multiple gendisk instances can allocated/added for single request queue in case of disk rebind. blkg may still stay in q->blkg_list when calling blkcg_init_disk() for rebind, then q->blkg_list becomes corrupted. Fix the list corruption issue by: - add blkg_init_queue() to initialize q->blkg_list & q->blkcg_mutex only - move calling blkg_init_queue() into blk_alloc_queue() The list corruption should be started since commit f1c006f1c685 ("blk-cgroup: synchronize pd_free_fn() from blkg_free_workfn() and blkcg_deactivate_policy()") which delays removing blkg from q->blkg_list into blkg_free_workfn().

In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix missing hugetlb_lock for resv uncharge There is a recent report on UFFDIO_COPY over hugetlb: https://lore.kernel.org/all/[email protected]/ 350: lockdep_assert_held(&hugetlb_lock); Should be an issue in hugetlb but triggered in an userfault context, where it goes into the unlikely path where two threads modifying the resv map together. Mike has a fix in that path for resv uncharge but it looks like the locking criteria was overlooked: hugetlb_cgroup_uncharge_folio_rsvd() will update the cgroup pointer, so it requires to be called with the lock held.

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix the pre-flush when appending to a file in writethrough mode In netfs_perform_write(), when the file is marked NETFS_ICTX_WRITETHROUGH or O_*SYNC or RWF_*SYNC was specified, write-through caching is performed on a buffered file. When setting up for write-through, we flush any conflicting writes in the region and wait for the write to complete, failing if there's a write error to return. The issue arises if we're writing at or above the EOF position because we skip the flush and - more importantly - the wait. This becomes a problem if there's a partial folio at the end of the file that is being written out and we want to make a write to it too. Both the already-running write and the write we start both want to clear the writeback mark, but whoever is second causes a warning looking something like: ------------[ cut here ]------------ R=00000012: folio 11 is not under writeback WARNING: CPU: 34 PID: 654 at fs/netfs/write_collect.c:105 ... CPU: 34 PID: 654 Comm: kworker/u386:27 Tainted: G S ... ... Workqueue: events_unbound netfs_write_collection_worker ... RIP: 0010:netfs_writeback_lookup_folio Fix this by making the flush-and-wait unconditional. It will do nothing if there are no folios in the pagecache and will return quickly if there are no folios in the region specified. Further, move the WBC attachment above the flush call as the flush is going to attach a WBC and detach it again if it is not present - and since we need one anyway we might as well share it.

A Prototype Pollution issue in API Dev Tools json-schema-ref-parser v.11.0.0 and v.11.1.0 allows a remote attacker to execute arbitrary code via the bundle()`, `parse()`, `resolve()`, `dereference() functions.

In the Linux kernel, the following vulnerability has been resolved: btrfs: qgroup: fix qgroup prealloc rsv leak in subvolume operations Create subvolume, create snapshot and delete subvolume all use btrfs_subvolume_reserve_metadata() to reserve metadata for the changes done to the parent subvolume's fs tree, which cannot be mediated in the normal way via start_transaction. When quota groups (squota or qgroups) are enabled, this reserves qgroup metadata of type PREALLOC. Once the operation is associated to a transaction, we convert PREALLOC to PERTRANS, which gets cleared in bulk at the end of the transaction. However, the error paths of these three operations were not implementing this lifecycle correctly. They unconditionally converted the PREALLOC to PERTRANS in a generic cleanup step regardless of errors or whether the operation was fully associated to a transaction or not. This resulted in error paths occasionally converting this rsv to PERTRANS without calling record_root_in_trans successfully, which meant that unless that root got recorded in the transaction by some other thread, the end of the transaction would not free that root's PERTRANS, leaking it. Ultimately, this resulted in hitting a WARN in CONFIG_BTRFS_DEBUG builds at unmount for the leaked reservation. The fix is to ensure that every qgroup PREALLOC reservation observes the following properties: 1. any failure before record_root_in_trans is called successfully results in freeing the PREALLOC reservation. 2. after record_root_in_trans, we convert to PERTRANS, and now the transaction owns freeing the reservation. This patch enforces those properties on the three operations. Without it, generic/269 with squotas enabled at mkfs time would fail in ~5-10 runs on my system. With this patch, it ran successfully 1000 times in a row.

In the Linux kernel, the following vulnerability has been resolved: btrfs: make sure that WRITTEN is set on all metadata blocks We previously would call btrfs_check_leaf() if we had the check integrity code enabled, which meant that we could only run the extended leaf checks if we had WRITTEN set on the header flags. This leaves a gap in our checking, because we could end up with corruption on disk where WRITTEN isn't set on the leaf, and then the extended leaf checks don't get run which we rely on to validate all of the item pointers to make sure we don't access memory outside of the extent buffer. However, since 732fab95abe2 ("btrfs: check-integrity: remove CONFIG_BTRFS_FS_CHECK_INTEGRITY option") we no longer call btrfs_check_leaf() from btrfs_mark_buffer_dirty(), which means we only ever call it on blocks that are being written out, and thus have WRITTEN set, or that are being read in, which should have WRITTEN set. Add checks to make sure we have WRITTEN set appropriately, and then make sure __btrfs_check_leaf() always does the item checking. This will protect us from file systems that have been corrupted and no longer have WRITTEN set on some of the blocks. This was hit on a crafted image tweaking the WRITTEN bit and reported by KASAN as out-of-bound access in the eb accessors. The example is a dir item at the end of an eb. [2.042] BTRFS warning (device loop1): bad eb member start: ptr 0x3fff start 30572544 member offset 16410 size 2 [2.040] general protection fault, probably for non-canonical address 0xe0009d1000000003: 0000 [#1] PREEMPT SMP KASAN NOPTI [2.537] KASAN: maybe wild-memory-access in range [0x0005088000000018-0x000508800000001f] [2.729] CPU: 0 PID: 2587 Comm: mount Not tainted 6.8.2 #1 [2.729] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 [2.621] RIP: 0010:btrfs_get_16+0x34b/0x6d0 [2.621] RSP: 0018:ffff88810871fab8 EFLAGS: 00000206 [2.621] RAX: 0000a11000000003 RBX: ffff888104ff8720 RCX: ffff88811b2288c0 [2.621] RDX: dffffc0000000000 RSI: ffffffff81dd8aca RDI: ffff88810871f748 [2.621] RBP: 000000000000401a R08: 0000000000000001 R09: ffffed10210e3ee9 [2.621] R10: ffff88810871f74f R11: 205d323430333737 R12: 000000000000001a [2.621] R13: 000508800000001a R14: 1ffff110210e3f5d R15: ffffffff850011e8 [2.621] FS: 00007f56ea275840(0000) GS:ffff88811b200000(0000) knlGS:0000000000000000 [2.621] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [2.621] CR2: 00007febd13b75c0 CR3: 000000010bb50000 CR4: 00000000000006f0 [2.621] Call Trace: [2.621] <TASK> [2.621] ? show_regs+0x74/0x80 [2.621] ? die_addr+0x46/0xc0 [2.621] ? exc_general_protection+0x161/0x2a0 [2.621] ? asm_exc_general_protection+0x26/0x30 [2.621] ? btrfs_get_16+0x33a/0x6d0 [2.621] ? btrfs_get_16+0x34b/0x6d0 [2.621] ? btrfs_get_16+0x33a/0x6d0 [2.621] ? __pfx_btrfs_get_16+0x10/0x10 [2.621] ? __pfx_mutex_unlock+0x10/0x10 [2.621] btrfs_match_dir_item_name+0x101/0x1a0 [2.621] btrfs_lookup_dir_item+0x1f3/0x280 [2.621] ? __pfx_btrfs_lookup_dir_item+0x10/0x10 [2.621] btrfs_get_tree+0xd25/0x1910 [ copy more details from report ]

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Fix not validating setsockopt user input Check user input length before copying data.

In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Fix deadlock in context_xa ivpu_device->context_xa is locked both in kernel thread and IRQ context. It requires XA_FLAGS_LOCK_IRQ flag to be passed during initialization otherwise the lock could be acquired from a thread and interrupted by an IRQ that locks it for the second time causing the deadlock. This deadlock was reported by lockdep and observed in internal tests.

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix WARN_ON in iommu probe path Commit 1a75cc710b95 ("iommu/vt-d: Use rbtree to track iommu probed devices") adds all devices probed by the iommu driver in a rbtree indexed by the source ID of each device. It assumes that each device has a unique source ID. This assumption is incorrect and the VT-d spec doesn't state this requirement either. The reason for using a rbtree to track devices is to look up the device with PCI bus and devfunc in the paths of handling ATS invalidation time out error and the PRI I/O page faults. Both are PCI ATS feature related. Only track the devices that have PCI ATS capabilities in the rbtree to avoid unnecessary WARN_ON in the iommu probe path. Otherwise, on some platforms below kernel splat will be displayed and the iommu probe results in failure. WARNING: CPU: 3 PID: 166 at drivers/iommu/intel/iommu.c:158 intel_iommu_probe_device+0x319/0xd90 Call Trace: <TASK> ? __warn+0x7e/0x180 ? intel_iommu_probe_device+0x319/0xd90 ? report_bug+0x1f8/0x200 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? intel_iommu_probe_device+0x319/0xd90 ? debug_mutex_init+0x37/0x50 __iommu_probe_device+0xf2/0x4f0 iommu_probe_device+0x22/0x70 iommu_bus_notifier+0x1e/0x40 notifier_call_chain+0x46/0x150 blocking_notifier_call_chain+0x42/0x60 bus_notify+0x2f/0x50 device_add+0x5ed/0x7e0 platform_device_add+0xf5/0x240 mfd_add_devices+0x3f9/0x500 ? preempt_count_add+0x4c/0xa0 ? up_write+0xa2/0x1b0 ? __debugfs_create_file+0xe3/0x150 intel_lpss_probe+0x49f/0x5b0 ? pci_conf1_write+0xa3/0xf0 intel_lpss_pci_probe+0xcf/0x110 [intel_lpss_pci] pci_device_probe+0x95/0x120 really_probe+0xd9/0x370 ? __pfx___driver_attach+0x10/0x10 __driver_probe_device+0x73/0x150 driver_probe_device+0x19/0xa0 __driver_attach+0xb6/0x180 ? __pfx___driver_attach+0x10/0x10 bus_for_each_dev+0x77/0xd0 bus_add_driver+0x114/0x210 driver_register+0x5b/0x110 ? __pfx_intel_lpss_pci_driver_init+0x10/0x10 [intel_lpss_pci] do_one_initcall+0x57/0x2b0 ? kmalloc_trace+0x21e/0x280 ? do_init_module+0x1e/0x210 do_init_module+0x5f/0x210 load_module+0x1d37/0x1fc0 ? init_module_from_file+0x86/0xd0 init_module_from_file+0x86/0xd0 idempotent_init_module+0x17c/0x230 __x64_sys_finit_module+0x56/0xb0 do_syscall_64+0x6e/0x140 entry_SYSCALL_64_after_hwframe+0x71/0x79

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sock: Fix not validating setsockopt user input Check user input length before copying data.

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix possible memory leak in bnxt_rdma_aux_device_init() If ulp = kzalloc() fails, the allocated edev will leak because it is not properly assigned and the cleanup path will not be able to free it. Fix it by assigning it properly immediately after allocation.

In the Linux kernel, the following vulnerability has been resolved: af_unix: Clear stale u->oob_skb. syzkaller started to report deadlock of unix_gc_lock after commit 4090fa373f0e ("af_unix: Replace garbage collection algorithm."), but it just uncovers the bug that has been there since commit 314001f0bf92 ("af_unix: Add OOB support"). The repro basically does the following. from socket import * from array import array c1, c2 = socketpair(AF_UNIX, SOCK_STREAM) c1.sendmsg([b'a'], [(SOL_SOCKET, SCM_RIGHTS, array("i", [c2.fileno()]))], MSG_OOB) c2.recv(1) # blocked as no normal data in recv queue c2.close() # done async and unblock recv() c1.close() # done async and trigger GC A socket sends its file descriptor to itself as OOB data and tries to receive normal data, but finally recv() fails due to async close(). The problem here is wrong handling of OOB skb in manage_oob(). When recvmsg() is called without MSG_OOB, manage_oob() is called to check if the peeked skb is OOB skb. In such a case, manage_oob() pops it out of the receive queue but does not clear unix_sock(sk)->oob_skb. This is wrong in terms of uAPI. Let's say we send "hello" with MSG_OOB, and "world" without MSG_OOB. The 'o' is handled as OOB data. When recv() is called twice without MSG_OOB, the OOB data should be lost. >>> from socket import * >>> c1, c2 = socketpair(AF_UNIX, SOCK_STREAM, 0) >>> c1.send(b'hello', MSG_OOB) # 'o' is OOB data 5 >>> c1.send(b'world') 5 >>> c2.recv(5) # OOB data is not received b'hell' >>> c2.recv(5) # OOB date is skipped b'world' >>> c2.recv(5, MSG_OOB) # This should return an error b'o' In the same situation, TCP actually returns -EINVAL for the last recv(). Also, if we do not clear unix_sk(sk)->oob_skb, unix_poll() always set EPOLLPRI even though the data has passed through by previous recv(). To avoid these issues, we must clear unix_sk(sk)->oob_skb when dequeuing it from recv queue. The reason why the old GC did not trigger the deadlock is because the old GC relied on the receive queue to detect the loop. When it is triggered, the socket with OOB data is marked as GC candidate because file refcount == inflight count (1). However, after traversing all inflight sockets, the socket still has a positive inflight count (1), thus the socket is excluded from candidates. Then, the old GC lose the chance to garbage-collect the socket. With the old GC, the repro continues to create true garbage that will never be freed nor detected by kmemleak as it's linked to the global inflight list. That's why we couldn't even notice the issue.

In the Linux kernel, the following vulnerability has been resolved: raid1: fix use-after-free for original bio in raid1_write_request() r1_bio->bios[] is used to record new bios that will be issued to underlying disks, however, in raid1_write_request(), r1_bio->bios[] will set to the original bio temporarily. Meanwhile, if blocked rdev is set, free_r1bio() will be called causing that all r1_bio->bios[] to be freed: raid1_write_request() r1_bio = alloc_r1bio(mddev, bio); -> r1_bio->bios[] is NULL for (i = 0; i < disks; i++) -> for each rdev in conf // first rdev is normal r1_bio->bios[0] = bio; -> set to original bio // second rdev is blocked if (test_bit(Blocked, &rdev->flags)) break if (blocked_rdev) free_r1bio() put_all_bios() bio_put(r1_bio->bios[0]) -> original bio is freed Test scripts: mdadm -CR /dev/md0 -l1 -n4 /dev/sd[abcd] --assume-clean fio -filename=/dev/md0 -ioengine=libaio -rw=write -bs=4k -numjobs=1 \ -iodepth=128 -name=test -direct=1 echo blocked > /sys/block/md0/md/rd2/state Test result: BUG bio-264 (Not tainted): Object already free ----------------------------------------------------------------------------- Allocated in mempool_alloc_slab+0x24/0x50 age=1 cpu=1 pid=869 kmem_cache_alloc+0x324/0x480 mempool_alloc_slab+0x24/0x50 mempool_alloc+0x6e/0x220 bio_alloc_bioset+0x1af/0x4d0 blkdev_direct_IO+0x164/0x8a0 blkdev_write_iter+0x309/0x440 aio_write+0x139/0x2f0 io_submit_one+0x5ca/0xb70 __do_sys_io_submit+0x86/0x270 __x64_sys_io_submit+0x22/0x30 do_syscall_64+0xb1/0x210 entry_SYSCALL_64_after_hwframe+0x6c/0x74 Freed in mempool_free_slab+0x1f/0x30 age=1 cpu=1 pid=869 kmem_cache_free+0x28c/0x550 mempool_free_slab+0x1f/0x30 mempool_free+0x40/0x100 bio_free+0x59/0x80 bio_put+0xf0/0x220 free_r1bio+0x74/0xb0 raid1_make_request+0xadf/0x1150 md_handle_request+0xc7/0x3b0 md_submit_bio+0x76/0x130 __submit_bio+0xd8/0x1d0 submit_bio_noacct_nocheck+0x1eb/0x5c0 submit_bio_noacct+0x169/0xd40 submit_bio+0xee/0x1d0 blkdev_direct_IO+0x322/0x8a0 blkdev_write_iter+0x309/0x440 aio_write+0x139/0x2f0 Since that bios for underlying disks are not allocated yet, fix this problem by using mempool_free() directly to free the r1_bio.

In the Linux kernel, the following vulnerability has been resolved: virtio_net: Do not send RSS key if it is not supported There is a bug when setting the RSS options in virtio_net that can break the whole machine, getting the kernel into an infinite loop. Running the following command in any QEMU virtual machine with virtionet will reproduce this problem: # ethtool -X eth0 hfunc toeplitz This is how the problem happens: 1) ethtool_set_rxfh() calls virtnet_set_rxfh() 2) virtnet_set_rxfh() calls virtnet_commit_rss_command() 3) virtnet_commit_rss_command() populates 4 entries for the rss scatter-gather 4) Since the command above does not have a key, then the last scatter-gatter entry will be zeroed, since rss_key_size == 0. sg_buf_size = vi->rss_key_size; 5) This buffer is passed to qemu, but qemu is not happy with a buffer with zero length, and do the following in virtqueue_map_desc() (QEMU function): if (!sz) { virtio_error(vdev, "virtio: zero sized buffers are not allowed"); 6) virtio_error() (also QEMU function) set the device as broken vdev->broken = true; 7) Qemu bails out, and do not repond this crazy kernel. 8) The kernel is waiting for the response to come back (function virtnet_send_command()) 9) The kernel is waiting doing the following : while (!virtqueue_get_buf(vi->cvq, &tmp) && !virtqueue_is_broken(vi->cvq)) cpu_relax(); 10) None of the following functions above is true, thus, the kernel loops here forever. Keeping in mind that virtqueue_is_broken() does not look at the qemu `vdev->broken`, so, it never realizes that the vitio is broken at QEMU side. Fix it by not sending RSS commands if the feature is not available in the device.

In the Linux kernel, the following vulnerability has been resolved: sched/eevdf: Prevent vlag from going out of bounds in reweight_eevdf() It was possible to have pick_eevdf() return NULL, which then causes a NULL-deref. This turned out to be due to entity_eligible() returning falsely negative because of a s64 multiplcation overflow. Specifically, reweight_eevdf() computes the vlag without considering the limit placed upon vlag as update_entity_lag() does, and then the scaling multiplication (remember that weight is 20bit fixed point) can overflow. This then leads to the new vruntime being weird which then causes the above entity_eligible() to go side-ways and claim nothing is eligible. Thus limit the range of vlag accordingly. All this was quite rare, but fatal when it does happen.

In the Linux kernel, the following vulnerability has been resolved: riscv: Fix loading 64-bit NOMMU kernels past the start of RAM commit 3335068f8721 ("riscv: Use PUD/P4D/PGD pages for the linear mapping") added logic to allow using RAM below the kernel load address. However, this does not work for NOMMU, where PAGE_OFFSET is fixed to the kernel load address. Since that range of memory corresponds to PFNs below ARCH_PFN_OFFSET, mm initialization runs off the beginning of mem_map and corrupts adjacent kernel memory. Fix this by restoring the previous behavior for NOMMU kernels.

In the Linux kernel, the following vulnerability has been resolved: phy: marvell: a3700-comphy: Fix out of bounds read There is an out of bounds read access of 'gbe_phy_init_fix[fix_idx].addr' every iteration after 'fix_idx' reaches 'ARRAY_SIZE(gbe_phy_init_fix)'. Make sure 'gbe_phy_init[addr]' is used when all elements of 'gbe_phy_init_fix' array are handled. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: ACPI: CPPC: Use access_width over bit_width for system memory accesses To align with ACPI 6.3+, since bit_width can be any 8-bit value, it cannot be depended on to be always on a clean 8b boundary. This was uncovered on the Cobalt 100 platform. SError Interrupt on CPU26, code 0xbe000011 -- SError CPU: 26 PID: 1510 Comm: systemd-udevd Not tainted 5.15.2.1-13 #1 Hardware name: MICROSOFT CORPORATION, BIOS MICROSOFT CORPORATION pstate: 62400009 (nZCv daif +PAN -UAO +TCO -DIT -SSBS BTYPE=--) pc : cppc_get_perf_caps+0xec/0x410 lr : cppc_get_perf_caps+0xe8/0x410 sp : ffff8000155ab730 x29: ffff8000155ab730 x28: ffff0080139d0038 x27: ffff0080139d0078 x26: 0000000000000000 x25: ffff0080139d0058 x24: 00000000ffffffff x23: ffff0080139d0298 x22: ffff0080139d0278 x21: 0000000000000000 x20: ffff00802b251910 x19: ffff0080139d0000 x18: ffffffffffffffff x17: 0000000000000000 x16: ffffdc7e111bad04 x15: ffff00802b251008 x14: ffffffffffffffff x13: ffff013f1fd63300 x12: 0000000000000006 x11: ffffdc7e128f4420 x10: 0000000000000000 x9 : ffffdc7e111badec x8 : ffff00802b251980 x7 : 0000000000000000 x6 : ffff0080139d0028 x5 : 0000000000000000 x4 : ffff0080139d0018 x3 : 00000000ffffffff x2 : 0000000000000008 x1 : ffff8000155ab7a0 x0 : 0000000000000000 Kernel panic - not syncing: Asynchronous SError Interrupt CPU: 26 PID: 1510 Comm: systemd-udevd Not tainted 5.15.2.1-13 #1 Hardware name: MICROSOFT CORPORATION, BIOS MICROSOFT CORPORATION Call trace: dump_backtrace+0x0/0x1e0 show_stack+0x24/0x30 dump_stack_lvl+0x8c/0xb8 dump_stack+0x18/0x34 panic+0x16c/0x384 add_taint+0x0/0xc0 arm64_serror_panic+0x7c/0x90 arm64_is_fatal_ras_serror+0x34/0xa4 do_serror+0x50/0x6c el1h_64_error_handler+0x40/0x74 el1h_64_error+0x7c/0x80 cppc_get_perf_caps+0xec/0x410 cppc_cpufreq_cpu_init+0x74/0x400 [cppc_cpufreq] cpufreq_online+0x2dc/0xa30 cpufreq_add_dev+0xc0/0xd4 subsys_interface_register+0x134/0x14c cpufreq_register_driver+0x1b0/0x354 cppc_cpufreq_init+0x1a8/0x1000 [cppc_cpufreq] do_one_initcall+0x50/0x250 do_init_module+0x60/0x27c load_module+0x2300/0x2570 __do_sys_finit_module+0xa8/0x114 __arm64_sys_finit_module+0x2c/0x3c invoke_syscall+0x78/0x100 el0_svc_common.constprop.0+0x180/0x1a0 do_el0_svc+0x84/0xa0 el0_svc+0x2c/0xc0 el0t_64_sync_handler+0xa4/0x12c el0t_64_sync+0x1a4/0x1a8 Instead, use access_width to determine the size and use the offset and width to shift and mask the bits to read/write out. Make sure to add a check for system memory since pcc redefines the access_width to subspace id. If access_width is not set, then fall back to using bit_width. [ rjw: Subject and changelog edits, comment adjustments ]

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: honor table dormant flag from netdev release event path Check for table dormant flag otherwise netdev release event path tries to unregister an already unregistered hook. [524854.857999] ------------[ cut here ]------------ [524854.858010] WARNING: CPU: 0 PID: 3386599 at net/netfilter/core.c:501 __nf_unregister_net_hook+0x21a/0x260 [...] [524854.858848] CPU: 0 PID: 3386599 Comm: kworker/u32:2 Not tainted 6.9.0-rc3+ #365 [524854.858869] Workqueue: netns cleanup_net [524854.858886] RIP: 0010:__nf_unregister_net_hook+0x21a/0x260 [524854.858903] Code: 24 e8 aa 73 83 ff 48 63 43 1c 83 f8 01 0f 85 3d ff ff ff e8 98 d1 f0 ff 48 8b 3c 24 e8 8f 73 83 ff 48 63 43 1c e9 26 ff ff ff <0f> 0b 48 83 c4 18 48 c7 c7 00 68 e9 82 5b 5d 41 5c 41 5d 41 5e 41 [524854.858914] RSP: 0018:ffff8881e36d79e0 EFLAGS: 00010246 [524854.858926] RAX: 0000000000000000 RBX: ffff8881339ae790 RCX: ffffffff81ba524a [524854.858936] RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff8881c8a16438 [524854.858945] RBP: ffff8881c8a16438 R08: 0000000000000001 R09: ffffed103c6daf34 [524854.858954] R10: ffff8881e36d79a7 R11: 0000000000000000 R12: 0000000000000005 [524854.858962] R13: ffff8881c8a16000 R14: 0000000000000000 R15: ffff8881351b5a00 [524854.858971] FS: 0000000000000000(0000) GS:ffff888390800000(0000) knlGS:0000000000000000 [524854.858982] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [524854.858991] CR2: 00007fc9be0f16f4 CR3: 00000001437cc004 CR4: 00000000001706f0 [524854.859000] Call Trace: [524854.859006] <TASK> [524854.859013] ? __warn+0x9f/0x1a0 [524854.859027] ? __nf_unregister_net_hook+0x21a/0x260 [524854.859044] ? report_bug+0x1b1/0x1e0 [524854.859060] ? handle_bug+0x3c/0x70 [524854.859071] ? exc_invalid_op+0x17/0x40 [524854.859083] ? asm_exc_invalid_op+0x1a/0x20 [524854.859100] ? __nf_unregister_net_hook+0x6a/0x260 [524854.859116] ? __nf_unregister_net_hook+0x21a/0x260 [524854.859135] nf_tables_netdev_event+0x337/0x390 [nf_tables] [524854.859304] ? __pfx_nf_tables_netdev_event+0x10/0x10 [nf_tables] [524854.859461] ? packet_notifier+0xb3/0x360 [524854.859476] ? _raw_spin_unlock_irqrestore+0x11/0x40 [524854.859489] ? dcbnl_netdevice_event+0x35/0x140 [524854.859507] ? __pfx_nf_tables_netdev_event+0x10/0x10 [nf_tables] [524854.859661] notifier_call_chain+0x7d/0x140 [524854.859677] unregister_netdevice_many_notify+0x5e1/0xae0

In the Linux kernel, the following vulnerability has been resolved: ipv4: check for NULL idev in ip_route_use_hint() syzbot was able to trigger a NULL deref in fib_validate_source() in an old tree [1]. It appears the bug exists in latest trees. All calls to __in_dev_get_rcu() must be checked for a NULL result. [1] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 2 PID: 3257 Comm: syz-executor.3 Not tainted 5.10.0-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:fib_validate_source+0xbf/0x15a0 net/ipv4/fib_frontend.c:425 Code: 18 f2 f2 f2 f2 42 c7 44 20 23 f3 f3 f3 f3 48 89 44 24 78 42 c6 44 20 27 f3 e8 5d 88 48 fc 4c 89 e8 48 c1 e8 03 48 89 44 24 18 <42> 80 3c 20 00 74 08 4c 89 ef e8 d2 15 98 fc 48 89 5c 24 10 41 bf RSP: 0018:ffffc900015fee40 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88800f7a4000 RCX: ffff88800f4f90c0 RDX: 0000000000000000 RSI: 0000000004001eac RDI: ffff8880160c64c0 RBP: ffffc900015ff060 R08: 0000000000000000 R09: ffff88800f7a4000 R10: 0000000000000002 R11: ffff88800f4f90c0 R12: dffffc0000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff88800f7a4000 FS: 00007f938acfe6c0(0000) GS:ffff888058c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f938acddd58 CR3: 000000001248e000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ip_route_use_hint+0x410/0x9b0 net/ipv4/route.c:2231 ip_rcv_finish_core+0x2c4/0x1a30 net/ipv4/ip_input.c:327 ip_list_rcv_finish net/ipv4/ip_input.c:612 [inline] ip_sublist_rcv+0x3ed/0xe50 net/ipv4/ip_input.c:638 ip_list_rcv+0x422/0x470 net/ipv4/ip_input.c:673 __netif_receive_skb_list_ptype net/core/dev.c:5572 [inline] __netif_receive_skb_list_core+0x6b1/0x890 net/core/dev.c:5620 __netif_receive_skb_list net/core/dev.c:5672 [inline] netif_receive_skb_list_internal+0x9f9/0xdc0 net/core/dev.c:5764 netif_receive_skb_list+0x55/0x3e0 net/core/dev.c:5816 xdp_recv_frames net/bpf/test_run.c:257 [inline] xdp_test_run_batch net/bpf/test_run.c:335 [inline] bpf_test_run_xdp_live+0x1818/0x1d00 net/bpf/test_run.c:363 bpf_prog_test_run_xdp+0x81f/0x1170 net/bpf/test_run.c:1376 bpf_prog_test_run+0x349/0x3c0 kernel/bpf/syscall.c:3736 __sys_bpf+0x45c/0x710 kernel/bpf/syscall.c:5115 __do_sys_bpf kernel/bpf/syscall.c:5201 [inline] __se_sys_bpf kernel/bpf/syscall.c:5199 [inline] __x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5199

In the Linux kernel, the following vulnerability has been resolved: ice: fix LAG and VF lock dependency in ice_reset_vf() 9f74a3dfcf83 ("ice: Fix VF Reset paths when interface in a failed over aggregate"), the ice driver has acquired the LAG mutex in ice_reset_vf(). The commit placed this lock acquisition just prior to the acquisition of the VF configuration lock. If ice_reset_vf() acquires the configuration lock via the ICE_VF_RESET_LOCK flag, this could deadlock with ice_vc_cfg_qs_msg() because it always acquires the locks in the order of the VF configuration lock and then the LAG mutex. Lockdep reports this violation almost immediately on creating and then removing 2 VF: ====================================================== WARNING: possible circular locking dependency detected 6.8.0-rc6 #54 Tainted: G W O ------------------------------------------------------ kworker/60:3/6771 is trying to acquire lock: ff40d43e099380a0 (&vf->cfg_lock){+.+.}-{3:3}, at: ice_reset_vf+0x22f/0x4d0 [ice] but task is already holding lock: ff40d43ea1961210 (&pf->lag_mutex){+.+.}-{3:3}, at: ice_reset_vf+0xb7/0x4d0 [ice] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&pf->lag_mutex){+.+.}-{3:3}: __lock_acquire+0x4f8/0xb40 lock_acquire+0xd4/0x2d0 __mutex_lock+0x9b/0xbf0 ice_vc_cfg_qs_msg+0x45/0x690 [ice] ice_vc_process_vf_msg+0x4f5/0x870 [ice] __ice_clean_ctrlq+0x2b5/0x600 [ice] ice_service_task+0x2c9/0x480 [ice] process_one_work+0x1e9/0x4d0 worker_thread+0x1e1/0x3d0 kthread+0x104/0x140 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x1b/0x30 -> #0 (&vf->cfg_lock){+.+.}-{3:3}: check_prev_add+0xe2/0xc50 validate_chain+0x558/0x800 __lock_acquire+0x4f8/0xb40 lock_acquire+0xd4/0x2d0 __mutex_lock+0x9b/0xbf0 ice_reset_vf+0x22f/0x4d0 [ice] ice_process_vflr_event+0x98/0xd0 [ice] ice_service_task+0x1cc/0x480 [ice] process_one_work+0x1e9/0x4d0 worker_thread+0x1e1/0x3d0 kthread+0x104/0x140 ret_from_fork+0x31/0x50 ret_from_fork_asm+0x1b/0x30 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&pf->lag_mutex); lock(&vf->cfg_lock); lock(&pf->lag_mutex); lock(&vf->cfg_lock); *** DEADLOCK *** 4 locks held by kworker/60:3/6771: #0: ff40d43e05428b38 ((wq_completion)ice){+.+.}-{0:0}, at: process_one_work+0x176/0x4d0 #1: ff50d06e05197e58 ((work_completion)(&pf->serv_task)){+.+.}-{0:0}, at: process_one_work+0x176/0x4d0 #2: ff40d43ea1960e50 (&pf->vfs.table_lock){+.+.}-{3:3}, at: ice_process_vflr_event+0x48/0xd0 [ice] #3: ff40d43ea1961210 (&pf->lag_mutex){+.+.}-{3:3}, at: ice_reset_vf+0xb7/0x4d0 [ice] stack backtrace: CPU: 60 PID: 6771 Comm: kworker/60:3 Tainted: G W O 6.8.0-rc6 #54 Hardware name: Workqueue: ice ice_service_task [ice] Call Trace: <TASK> dump_stack_lvl+0x4a/0x80 check_noncircular+0x12d/0x150 check_prev_add+0xe2/0xc50 ? save_trace+0x59/0x230 ? add_chain_cache+0x109/0x450 validate_chain+0x558/0x800 __lock_acquire+0x4f8/0xb40 ? lockdep_hardirqs_on+0x7d/0x100 lock_acquire+0xd4/0x2d0 ? ice_reset_vf+0x22f/0x4d0 [ice] ? lock_is_held_type+0xc7/0x120 __mutex_lock+0x9b/0xbf0 ? ice_reset_vf+0x22f/0x4d0 [ice] ? ice_reset_vf+0x22f/0x4d0 [ice] ? rcu_is_watching+0x11/0x50 ? ice_reset_vf+0x22f/0x4d0 [ice] ice_reset_vf+0x22f/0x4d0 [ice] ? process_one_work+0x176/0x4d0 ice_process_vflr_event+0x98/0xd0 [ice] ice_service_task+0x1cc/0x480 [ice] process_one_work+0x1e9/0x4d0 worker_thread+0x1e1/0x3d0 ? __pfx_worker_thread+0x10/0x10 kthread+0x104/0x140 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> To avoid deadlock, we must acquire the LAG ---truncated---

A vulnerability, which was classified as critical, has been found in Campcodes Complete Web-Based School Management System 1.0. This issue affects some unknown processing of the file /view/student_payment_details2.php. The manipulation of the argument index leads to sql injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-265097 was assigned to this vulnerability.

A vulnerability classified as critical was found in Campcodes Complete Web-Based School Management System 1.0. This vulnerability affects unknown code of the file /view/student_payment_details3.php. The manipulation of the argument index leads to sql injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-265096.

A vulnerability classified as critical has been found in Campcodes Complete Web-Based School Management System 1.0. This affects an unknown part of the file /view/student_payment_details.php. The manipulation of the argument index leads to sql injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-265095.

A vulnerability in mintplex-labs/anything-llm allows for a denial of service (DoS) condition through the modification of a user's `id` attribute to a value of 0. This issue affects the current version of the software, with the latest commit id `57984fa85c31988b2eff429adfc654c46e0c342a`. By exploiting this vulnerability, an attacker, with manager or admin privileges, can render a chosen account completely inaccessible. The application's mechanism for suspending accounts does not provide a means to reverse this condition through the UI, leading to uncontrolled resource consumption. The vulnerability is introduced due to the lack of input validation and sanitization in the user modification endpoint and the middleware's token validation logic. This issue has been addressed in version 1.0.0 of the software.

A vulnerability was found in Campcodes Complete Web-Based School Management System 1.0. It has been rated as critical. Affected by this issue is some unknown functionality of the file /view/student_grade_wise.php. The manipulation of the argument grade leads to sql injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-265094 is the identifier assigned to this vulnerability.

A vulnerability was found in Campcodes Complete Web-Based School Management System 1.0. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file /view/student_first_payment.php. The manipulation of the argument grade leads to sql injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-265093 was assigned to this vulnerability.

Westermo EDW-100 devices through 2024-05-03 have a hidden root user account with a hardcoded password that cannot be changed. NOTE: this is a serial-to-Ethernet converter that should not be placed at the edge of the network.

Westermo EDW-100 devices through 2024-05-03 allow an unauthenticated user to download a configuration file containing a cleartext password. NOTE: this is a serial-to-Ethernet converter that should not be placed at the edge of the network.

In Zammad before 6.3.1, a Ruby gem bundled by Zammad is installed with world-writable file permissions. This allowed a local attacker on the server to modify the gem's files, injecting arbitrary code into Zammad processes (which run with the environment and permissions of the Zammad user).

Cross-Site WebSocket Hijacking in SysReptor from version 2024.28 to version 2024.30 causes attackers to escalate privileges and obtain sensitive information when a logged-in SysReptor user visits a malicious same-site subdomain in the same browser session.

tine before 2023.11.8, when an LDAP backend is used, allows anonymous remote attackers to obtain sensitive authentication information via setup.php because of getRegistryData in Setup/Frontend/Json.php. (An update is also available for the 2022.11 series.)

In the mintupload package through 4.2.0 for Linux Mint, service-name mishandling leads to command injection via shell metacharacters in check_connection, drop_data_received_cb, and Service.remove. A user can modify a service name in a ~/.linuxmint/mintUpload/services/service file.

A vulnerability was found in SourceCodester Simple Inventory System 1.0. It has been declared as critical. This vulnerability affects unknown code of the file updateproduct.php. The manipulation of the argument ITEM leads to sql injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-265084.

A vulnerability was found in SourceCodester Simple Inventory System 1.0. It has been classified as critical. This affects an unknown part of the file tableedit.php. The manipulation of the argument from/to leads to sql injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-265083.

A vulnerability was found in SourceCodester Simple Inventory System 1.0 and classified as critical. Affected by this issue is some unknown functionality of the file updateprice.php. The manipulation of the argument ITEM leads to sql injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-265082 is the identifier assigned to this vulnerability.

A vulnerability has been found in SourceCodester Simple Inventory System 1.0 and classified as critical. Affected by this vulnerability is an unknown functionality of the file login.php. The manipulation of the argument username leads to sql injection. The exploit has been disclosed to the public and may be used. The identifier VDB-265081 was assigned to this vulnerability.

A vulnerability, which was classified as problematic, was found in SourceCodester Simple Inventory System 1.0. Affected is an unknown function of the file /tableedit.php#page=editprice. The manipulation of the argument itemnumber leads to cross-site request forgery. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-265080.

A vulnerability classified as problematic was found in Hipcam Device up to 20240511. This vulnerability affects unknown code of the file /log/wifi.mac of the component MAC Address Handler. The manipulation leads to information disclosure. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-265078 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability classified as problematic has been found in Victor Zsviot Camera 8.26.31. This affects an unknown part of the component MQTT Packet Handler. The manipulation leads to denial of service. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-265077 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

In the Linux kernel, the following vulnerability has been resolved: dma-direct: Leak pages on dma_set_decrypted() failure On TDX it is possible for the untrusted host to cause set_memory_encrypted() or set_memory_decrypted() to fail such that an error is returned and the resulting memory is shared. Callers need to take care to handle these errors to avoid returning decrypted (shared) memory to the page allocator, which could lead to functional or security issues. DMA could free decrypted/shared pages if dma_set_decrypted() fails. This should be a rare case. Just leak the pages in this case instead of freeing them.