CVE Feed

D-Link DSL-224 firmware version 3.0.10 allows post authentication command execution via an unspecified method.

D-Link DSL-G256DG version vBZ_1.00.27 web management interface allows authentication bypass via an unspecified method.

In Ubuntu's accountsservice an unprivileged local attacker can trigger a use-after-free vulnerability in accountsservice by sending a D-Bus message to the accounts-daemon process.

DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was withdrawn by its CNA. Further investigation showed that it was not a security issue. Notes: none.

DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2023-2246. Reason: This candidate is a reservation duplicate of CVE-2023-2246. Notes: All CVE users should reference CVE-2023-2246 instead of this candidate. All references and descriptions in this candidate have been removed to prevent accidental usage.

PHPgurukl Hostel Management System v.1.0 is vulnerable to Cross Site Scripting (XSS) via Add New Course.

Multiple vulnerabilities in the web-based management interface of Cisco AsyncOS Software for Cisco Secure Email and Web Manager; Cisco Secure Email Gateway, formerly Cisco Email Security Appliance (ESA); and Cisco Secure Web Appliance, formerly Cisco Web Security Appliance (WSA), could allow a remote attacker to conduct a cross-site scripting (XSS) attack against a user of the interface. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the change password functionality of Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) could allow an authenticated, remote attacker with Read-only credentials to elevate privileges to Administrator on an affected system. This vulnerability is due to incorrect handling of password change requests. An attacker could exploit this vulnerability by authenticating to the application as a Read-only user and sending a crafted request to the web-based management interface. A successful exploit could allow the attacker to alter the passwords of any user on the system, including an administrative user, and then impersonate that user. Note: Cisco Expressway Series refers to the Expressway Control (Expressway-C) device and the Expressway Edge (Expressway-E) device.

A vulnerability in the XCP Authentication Service of the Cisco Unified Communications Manager IM & Presence Service (Unified CM IM&P) could allow an unauthenticated, remote attacker to cause a temporary service outage for all Cisco Unified CM IM&P users who are attempting to authenticate to the service, resulting in a denial of service (DoS) condition. This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted login message to the affected device. A successful exploit could allow the attacker to cause an unexpected restart of the authentication service, preventing new users from successfully authenticating. Exploitation of this vulnerability does not impact Cisco Unified CM IM&P users who were authenticated prior to an attack.

A vulnerability in the Administrative XML Web Service (AXL) API of Cisco Unified Communications Manager (Unified CM) and Cisco Unified Communications Manager Session Management Edition (Unified CM SME) could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient validation of user-supplied input to the web UI of the Self Care Portal. An attacker could exploit this vulnerability by sending crafted HTTP input to an affected device. A successful exploit could allow the attacker to cause a DoS condition on the affected device.

A vulnerability in the web-based management interface of Cisco Small Business 200 Series Smart Switches, Cisco Small Business 300 Series Managed Switches, and Cisco Small Business 500 Series Stackable Managed Switches could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the interface on an affected device. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by persuading a user of an affected interface to view a page containing malicious HTML or script content. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker would need to have valid credentials to access the web-based management interface of the affected device. Cisco has not released software updates to address this vulnerability.

Multiple vulnerabilities in Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) could allow an authenticated attacker with Administrator-level read-only credentials to elevate their privileges to Administrator with read-write credentials on an affected system. Note: "Cisco Expressway Series" refers to Cisco Expressway Control (Expressway-C) devices and Cisco Expressway Edge (Expressway-E) devices. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in Cisco Duo Two-Factor Authentication for macOS could allow an authenticated, physical attacker to bypass secondary authentication and access an affected macOS device. This vulnerability is due to the incorrect handling of responses from Cisco Duo when the application is configured to fail open. An attacker with primary user credentials could exploit this vulnerability by attempting to authenticate to an affected device. A successful exploit could allow the attacker to access the affected device without valid permission.

A flaw was found in the QEMU built-in VNC server. When a client connects to the VNC server, QEMU checks whether the current number of connections crosses a certain threshold and if so, cleans up the previous connection. If the previous connection happens to be in the handshake phase and fails, QEMU cleans up the connection again, resulting in a NULL pointer dereference issue. This could allow a remote unauthenticated client to cause a denial of service.

PHPgurukl Hospital Management System v.1.0 is vulnerable to Cross Site Scripting (XSS).

PHPgurukl Hostel Management System v.1.0 is vulnerable to Cross Site Scripting (XSS).

pypdf is an open source, pure-python PDF library. In affected versions an attacker may craft a PDF which leads to an infinite loop if `__parse_content_stream` is executed. That is, for example, the case if the user extracted text from such a PDF. This issue was introduced in pull request #969 and resolved in pull request #1828. Users are advised to upgrade. Users unable to upgrade may modify the line `while peek not in (b"\r", b"\n")` in `pypdf/generic/_data_structures.py` to `while peek not in (b"\r", b"\n", b"")`.

Xpdf 4.04 will deadlock on a PDF object stream whose "Length" field is itself in another object stream.

Meldekarten generator is an open source project to create a program, running locally in the browser without the need for an internet-connection, to create, store and print registration cards for volunteers. All text fields on the webpage are vulnerable to XSS attacks. The user input isn't (fully) sanitized after submission. This issue has been addressed in commit `77e04f4af` which is included in the `1.0.0b1.1.2` release. Users are advised to upgrade. There are no known workarounds for this vulnerability.

IBM Cloud Pak for Security (CP4S) 1.9.0.0 through 1.9.2.0 could allow an attacker with a valid API key for one tenant to access data from another tenant's account. IBM X-Force ID: 254136.

IBM Robotic Process Automation for Cloud Pak 21.0.1 through 21.0.7.3 and 23.0.0 through 23.0.3 is vulnerable to insufficient security configuration which may allow creation of namespaces within a cluster. IBM X-Force ID: 244500.

IBM Robotic Process Automation for Cloud Pak 21.0.1 through 21.0.7.3 and 23.0.0 through 23.0.3 is vulnerable to security misconfiguration of the Redis container which may provide elevated privileges. IBM X-Force ID: 244074.

IBM QRadar SIEM 7.5.0 is vulnerable to information exposure allowing a delegated Admin tenant user with a specific domain security profile assigned to see data from other domains. IBM X-Force ID: 230403.

IBM QRadar SIEM 7.5.0 is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM X-Force ID: 248144.

Apereo CAS is an open source multilingual single sign-on solution for the web. Apereo CAS can be configured to use authentication based on client X509 certificates. These certificates can be provided via TLS handshake or a special HTTP header, such as “ssl_client_cert”. When checking the validity of the provided client certificate, X509CredentialsAuthenticationHandler performs check that this certificate is not revoked. To do so, it fetches URLs provided in the “CRL Distribution Points” extension of the certificate, which are taken from the certificate itself and therefore can be controlled by a malicious user. If the CAS server is configured to use an LDAP server for x509 authentication with a password, for example by setting a “cas.authn.x509.ldap.ldap-url” and “cas.authn.x509.ldap.bind-credential” properties, X509CredentialsAuthenticationHandler fetches revocation URLs from the certificate, which can be LDAP urls. When making requests to this LDAP urls, Apereo CAS uses the same password as for initially configured LDAP server, which can lead to a password leak. An unauthenticated user can leak the password used to LDAP connection configured on server. This issue has been addressed in version 6.6.6. Users are advised to upgrade. There are no known workarounds for this vulnerability.

IBM QRadar SIEM 7.5.0 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. IBM X-Force ID: 248147.

IBM QRadar SIEM 7.5.0 could allow an authenticated user to perform unauthorized actions due to hazardous input validation. IBM X-Force ID: 248134.

IBM Business Automation Workflow is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM X-Force ID: 255587.

Cloudexplorer-lite is an open source cloud software stack. Weak passwords can be easily guessed and are an easy target for brute force attacks. This can lead to an authentication system failure and compromise system security. Versions of cloudexplorer-lite prior to 1.2.0 did not enforce strong passwords. This vulnerability has been fixed in version 1.2.0. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Shopware is an open source e-commerce software. The mail validation in the registration process had some flaws, so it was possible to construct different mail addresses, that in the end result in the same address, which is shared by multiple accounts. This issue has been addressed in version 5.7.18 and users are advised to update. There are no known workarounds for this vulnerability.

Shopware is an open source e-commerce software. Due to an incorrect configuration in the `.htaccess` file, the configuration file of the Javascript could be read in production environments (`themes/package-lock.json`). With this information, the specific Shopware version in a deployment might be determined by an attacker, which could be used for further attacks. Users are advised to update to version 5.7.18. There are no known workarounds for this vulnerability.

A missing authorization check in multiple URL validation endpoints of the Insider Threat Management Server enables an anonymous attacker on an adjacent network to smuggle content via DNS lookups. All versions before 7.14.3 are affected.

A missing authorization check in the MacOS agent configuration endpoint of the Insider Threat Management Server enables an anonymous attacker on an adjacent network to obtain sensitive information. Successful exploitation requires an attacker to first obtain a valid agent authentication token. All versions before 7.14.3 are affected.

A missing authorization check in multiple SOAP endpoints of the Insider Threat Management Server enables an attacker on an adjacent network to read and write unauthorized objects. Successful exploitation requires an attacker to first obtain a valid agent authentication token. All versions before 7.14.3 are affected.

Server-Side Request Forgery (SSRF) in GitHub repository plantuml/plantuml prior to 1.2023.9.

An insecure filesystem permission in the Insider Threat Management Agent for Windows enables local unprivileged users to disrupt agent monitoring. All versions prior to 7.14.3 are affected. Agents for MacOS and Linux and Cloud are unaffected.

Improper Access Control in GitHub repository plantuml/plantuml prior to 1.2023.9.

Unchecked parameter value in M-Files Server in versions before 23.6.12695.3 (excluding 23.2 SR2 and newer) allows anonymous user to cause denial of service

The wpbrutalai WordPress plugin before 2.0.1 does not sanitise and escape a parameter before outputting it back in the page, leading to a Reflected Cross-Site Scripting which could be used against a logged in high privilege users such as admin.

The CodeColorer WordPress plugin before 0.10.1 does not sanitise and escape some of its settings, which could allow high privilege users such as admin to perform Stored Cross-Site Scripting attacks even when the unfiltered_html capability is disallowed (for example in multisite setup)

The Gravity Forms Google Sheet Connector WordPress plugin before 1.3.5, gsheetconnector-gravityforms-pro WordPress plugin through 1.3.5 does not have CSRF check when updating its Access Code, which could allow attackers to make logged in admin change the access code to an arbitrary one via a CSRF attack

The Catalyst Connect Zoho CRM Client Portal WordPress plugin before 2.1.0 does not sanitize and escape a parameter before outputting it back in the page, leading to a Reflected Cross-Site Scripting which could be used against high-privilege users such as admin.

The KiviCare WordPress plugin before 3.2.1 does not sanitise and escape a parameter before outputting it back in the page, leading to a Reflected Cross-Site Scripting which could be used against high privilege users such as administrator

The KiviCare WordPress plugin before 3.2.1 does not have CSRF checks (either flawed or missing completely) in various AJAX actions, which could allow attackers to make logged in users perform unwanted actions via CSRF attacks. This includes, but is not limited to: Delete arbitrary appointments/medical records/etc, create/update various users (patients, doctors etc)

The USM-Premium WordPress plugin before 16.3 does not sanitize and escape some of its settings, which could allow high-privilege users such as admin to perform Stored Cross-Site Scripting attacks even when the unfiltered_html capability is disallowed (for example, in multisite setup).

The KiviCare WordPress plugin before 3.2.1 does not restrict the information returned in a response and returns all user data, allowing low privilege users such as subscriber to retrieve sensitive information such as the user email and hashed password of other users

The FormCraft WordPress plugin before 3.9.7 does not properly sanitise and escape a parameter before using it in a SQL statement, leading to a SQL injection exploitable by high privilege users such as admin.

The File Manager Advanced Shortcode WordPress plugin through 2.3.2 does not adequately prevent uploading files with disallowed MIME types when using the shortcode. This leads to RCE in cases where the allowed MIME type list does not include PHP files. In the worst case, this is available to unauthenticated users.

The Ultimate Product Catalog WordPress plugin before 5.2.6 does not sanitise and escape some of its settings, which could allow high privilege users such as admin to perform Stored Cross-Site Scripting attacks even when the unfiltered_html capability is disallowed (for example in multisite setup)

The WP Inventory Manager WordPress plugin before 2.1.0.14 does not have CSRF checks, which could allow attackers to make logged-in admins delete Inventory Items via a CSRF attack