CVE Feed

A memory corruption vulnerability in the affected interface of HPE Networking Instant On could allow an unauthenticated remote attacker to conduct a denial of service attack. Successful exploitation could allow an attacker to interrupt the normal operation of the affected service and to access some limited information within the affected component.

A denial-of-service vulnerability exists in the API endpoint of HPE Networking Instant On that could allow an authenticated attacker with administrative privileges to cause a denial of service. Successful exploitation could allow an attacker to interrupt the normal operation of the affected service, which resumes without manual intervention.

A local privilege-escalation vulnerability has been discovered in the affected daemon of HPE Networking Instant ON. Successful exploitation of this vulnerability could allow a local attacker to achieve arbitrary code execution with root privileges if certain preconditions are met outside of the attacker's control.

An authentication bypass vulnerability in the captive portal of HPE Networking Instant On could allow an unauthenticated remote attacker to circumvent existing authentication controls. Successful exploitation could allow an attacker to gain limited access to some data and to make limited changes within the affected component.

An authentication bypass vulnerability exists in the PAPI protocol of HPE Networking Instant ON APs that could allow an unauthenticated adjacent attacker to circumvent existing authentication controls. Successful exploitation could allow an attacker to circumvent certain existing authentication mechanisms and send unauthorized network traffic to the target device.

A format string vulnerability in the API endpoint of HPE Networking Instant ON APs could allow an authenticated remote attacker with high privileges to cause memory corruption with a modified input. Successful exploitation could allow an attacker to provoke a denial-of-service condition or remote code execution in the affected system function.

A vulnerability in the API endpoint of HPE Networking Instant ON APs could allow an authenticated remote attacker with high privileges to conduct a server-side request forgery (SSRF) attack. Successful exploitation could allow an attacker to execute arbitrary commands as a privileged user on the underlying operating system.

Command injection vulnerabilities exist in the affected interface of HPE Networking Instant ON that could allow an authenticated remote attacker with high privileges to perform command injection. Successful exploitation could allow an attacker to execute arbitrary commands as a privileged user on the underlying operating system.

An authentication bypass vulnerability in the API endpoint of HPE Networking Instant ON could allow an unauthenticated remote attacker to bypass network access controls if certain preconditions outside of the attacker's control are met. Successful exploitation could allow an attacker to obtain unauthorized access to restricted networks.

A vulnerability has been identified in a management protocol of HPE Networking Instant ON APs that could allow an unauthenticated adjacent attacker to circumvent existing authentication controls. Successful exploitation could result in a complete bypass of security restrictions, potentially leading to remote code execution with elevated privileges.

A command injection vulnerability exists in CLI of the affected HPE Networking Instant ON APs that could allow an unauthenticated adjacent attacker to perform command injection by sending specially crafted packets. Successful exploitation could allow an attacker to execute arbitrary commands as a privileged user on the underlying operating system.

Buffer overflow vulnerabilities exist in the affected interface of HPE Networking Instant ON APS that could allow an unauthenticated adjacent attacker to achieve remote code execution. Successful exploitation could allow an attacker to execute arbitrary commands on the underlying operating system.

Uncontrolled Format string vulnerabilities exist in the affected interface of HPE Networking Instant ON APs that could allow an unauthenticated remote attacker to run arbitrary commands on the underlying host. Successful exploitation could result in a Denial-of-service or potential remote code execution.

Buffer overflow vulnerability exists in the affected interface of HPE Networking Instant ON that could allow an unauthenticated remote attacker to run arbitrary code on the underlying host. Successful exploitation could allow an attacker to execute arbitrary code as a privileged user on the underlying operating system.

Liberu CRM 0.9.1 before 10.0.0 contains a broken access control vulnerability that allows any user holding a pending team invitation to invite additional attacker-controlled accounts with elevated privileges by exploiting a flawed authorization predicate in TeamPolicy::addTeamMember() that grants invitation rights based solely on the existence of a pending invitation email match. Attackers can send a POST request to the team-invitations route specifying the admin role for a second account, bypassing privilege-level validation in InviteTeamMember, causing the second account upon invitation acceptance to be attached to the team with full admin-level create, read, update, and delete access over all team-scoped data.

JupyterLab is an extensible environment for interactive and reproducible computing, based on the Jupyter Notebook Architecture. From JupyterLab 4.5.0 until 4.5.11 and 4.6.4, from Notebook 7.5.0 until 7.6.3, and from JupyterLite Core 0.7.0 until 0.8.4, the system clipboard cell-paste path accepts attacker-controlled cell JSON without clearing metadata.trusted. When useSystemClipboardForCells is active and pasteCodeCellsWithoutOutput is disabled, a pasted code cell can mark HTML output as trusted, bypass output sanitization, and execute script in the authenticated JupyterLab origin without executing the cell. Markdown and raw cells are not affected because their output is sanitized. This issue is fixed in JupyterLab 4.5.11 and 4.6.4, Notebook 7.6.3, and JupyterLite Core 0.8.4.

JupyterLab is an extensible environment for interactive and reproducible computing, based on the Jupyter Notebook Architecture. From JupyterLab 3.0.0 until 4.5.11 and 4.6.4, and in JupyterLite Core 0.8.3 and earlier, the Plural-Forms header in a selected third-party language pack can append JavaScript after a valid plural rule because prefix-only regular-expression validation accepts a matching prefix without requiring the entire header to match. JupyterLab passes the accepted expression to new Function, so loading the catalogue and translating a plural string executes the appended code in the authenticated JupyterLab origin. Where Jupyter Server kernels, terminals, and APIs are exposed, the code can use authenticated server APIs to read or modify files and run code. Impact is much more limited in JupyterLite because it typically lacks most exposed Jupyter Server surfaces. The default English locale is unaffected because it does not load a translation catalogue. This issue is fixed in JupyterLab 4.5.11 and 4.6.4 and JupyterLite Core 0.8.4.

simple-git, an interface for running git commands in any node.js application, enables applications to execute Git operations from JavaScript. Prior to 2.0.1 of the argv-parser package, parseEnv omits VISUAL from GitEnvKeys, so prepareEnv drops the value before vulnerabilityCheck can classify it as allowUnsafeEditor. A consuming application that forwards attacker-influenced environment values can therefore allow Git to invoke an attacker-selected editor during operations such as commit amendment or interactive rebase when no higher-priority editor setting overrides VISUAL and Git's terminal prerequisites are met. The executable runs with the privileges of the Node.js process. This issue is fixed in argv-parser 2.0.1.

A vulnerability was detected in risesoft-y9 WorkFlow-Engine up to 9.6.10. Impacted is the function getByIdAndYear of the file CustomHistoricProcessServiceImpl.java of the component OAuth2 Resource Filter. Performing a manipulation of the argument year/processInstanceId results in sql injection. Remote exploitation of the attack is possible. The exploit is now public and may be used. The sink is injectable on two independent positions, not just one. The vendor was contacted early about this disclosure but did not respond in any way.

simple-git, an interface for running git commands in any node.js application, enables applications to execute Git operations from JavaScript. From 3.15.0 until 4.0.1, the default blockUnsafeOperationsPlugin does not classify trailer.<token>.cmd as unsafe configuration. An application that passes attacker-controlled values through SimpleGitOptions.config or inline -c arguments can therefore allow Git to invoke an attacker-selected shell command when git interpret-trailers processes the configured trailer. The command executes with the operating-system identity and permissions of the Node.js process. This issue is fixed in 4.0.1.

simple-git, an interface for running git commands in any node.js application, enables applications to execute Git operations from JavaScript. Prior to 4.0.0, the default blockUnsafeOperationsPlugin compares parsed option names with literal dangerous option spellings while Git accepts unambiguous long-option abbreviations. Attacker-influenced push arguments such as abbreviated --receive-pack or --exec forms can therefore bypass detectVulnerableFlags, reach git push against a local or file remote or an attacker-influenced receive-pack target, and cause Git to invoke an attacker-selected command in consumers that expose those arguments. The clone-side abbreviation handling does not protect the push path. This issue is fixed in 4.0.0.

simple-git, an interface for running git commands in any node.js application, enables applications to execute Git operations from JavaScript. Prior to 4.0.0, the default blockUnsafeOperationsPlugin does not completely reject configuration includes supplied through customArgs to git.clone(). The missing include.path classification permits Git to load an attacker-controlled configuration file, and the initial remediation does not cover includeIf.<condition>.path, allowing the same file-loading primitive through a conditional include. A loaded configuration can set an executable Git option such as core.sshCommand, which Git invokes during the clone operation with the privileges of the Node.js process. Exploitation requires the application to pass attacker-influenced custom arguments and requires an attacker-controlled file that the process can read. This issue is fixed in 4.0.0.

Russh is a Rust SSH client and server library. Prior to 0.62.6, the USERAUTH_REQUEST path reached from server::run_stream in russh/src/server/encrypted.rs increments self.common.auth_attempts but never compares it with server::Config.max_auth_attempts. An unauthenticated remote client can continue submitting authentication requests on one connection beyond the configured cap, bypassing the deployment's attempt-limiting policy and increasing online guessing opportunity and backend authentication workload. This issue is fixed in version 0.62.6.

Russh is a Rust SSH client and server library. Prior to 0.63.0, the hybrid ML-KEM 768 and X25519 implementation in russh/src/kex/hybrid_mlkem.rs accepts an all-zero 32-byte peer X25519 public key in both server_dh and compute_shared_secret, forcing the X25519 contribution to the combined shared secret to zero. A malicious SSH peer can therefore make the combined secret depend only on ML-KEM, defeating the hybrid exchange's intended fallback protection if ML-KEM is later weakened. This issue is fixed in version 0.63.0.

Russh is a Rust SSH client and server library. Prior to 0.63.1, client_read_authenticated in russh/src/client/encrypted.rs forwards CHANNEL_DATA, CHANNEL_EXTENDED_DATA, CHANNEL_EOF, CHANNEL_CLOSE, CHANNEL_OPEN_FAILURE, CHANNEL_SUCCESS, CHANNEL_FAILURE, and CHANNEL_REQUEST subtypes exit-status, exit-signal, and xon-xoff to public client::Handler callbacks without confirming that the ChannelId belongs to a channel the client opened and established. A malicious SSH server can send lifecycle events for predicted, unopened, unconfirmed, or released channel identifiers, causing application panics or corrupting command completion and exit-code tracking. This issue is fixed in version 0.63.1.

Russh is a Rust SSH client and server library. Prior to 0.63.1, a connection configured to permit mac=none can negotiate it with a MAC-requiring CTR or CBC block cipher because the selection logic validates needs_mac() only when MAC selection fails. A remote peer can then send a packet with a decrypted length of zero, causing russh/src/cipher/mod.rs to shrink the previously read block before indexing buffer.buffer[16..], which panics and terminates the connection task. This issue is fixed in version 0.63.1.

Russh is a Rust SSH client and server library. Prior to 0.63.2, an authenticated remote peer can send SSH_MSG_KEXINIT without the required SSH_MSG_KEX_ECDH_INIT and then flood SSH_MSG_CHANNEL_OPEN messages while SessionKexState::InProgress prevents priority_receiver in russh/src/server/session.rs from being drained. The server continues processing network input and enqueues a ChannelOpenReply for each request on an unbounded channel, allowing one connection to grow memory until the process is terminated. This issue is fixed in version 0.63.2.

pageant provides a [PageantStream] type that implements [AsyncRead] and [AsyncWrite] traits and can be used to talk to a running Pageant instance. Prior to pageant 0.2.3, the Windows pageant crate's pageant/src/wmmessage.rs MemoryMap::read function trusts a peer-controlled u32 response length supplied through the 8192-byte Pageant shared-memory mapping reached by AgentClient::connect_pageant. A local process that impersonates the Pageant window can make query_pageant_direct allocate up to approximately 4 GiB and copy beyond the mapped view, reliably crashing a russh client and conditionally exposing adjacent committed memory. This issue is fixed in pageant 0.2.3.

IBM i 7.6, 7.5, 7.4, and 7.3 could allow a local authenticated attacker to change the ownership of arbitrary files due to improper validation of an attacker-controlled file path.

Mounting an attacker-controlled NAND flash image (`lx_nand_flash_open()`) triggers an unbounded out-of-bounds heap **write** in LevelX's NAND flash-translation-layer metadata parser that overwrites a driver function pointer in the control block, giving a demonstrated control-flow hijack — RIP set to a full 8-byte attacker-chosen value (register-verified). Two accompanying OOB reads. All reproduced verbatim under ASan at HEAD `9f1cfdc`.

`gx_binres_theme_load()` sizes its theme buffer for the theme it was asked for, and allocates it even when the resource holds no theme with that id. A theme id at or past the theme count declared by the resource gets a buffer of zero bytes. The load pass then walks past the end of the theme table, takes whatever follows as a theme header, and writes a `GX_THEME` and its tables into that zero-byte buffer.

In Eclipse ThreadX NetX Duo versions 6.0 through 6.5.2.202603a, the FTP server accepts the first connection to a passive data port without checking that it comes from the client that requested passive mode. An unauthenticated network attacker who connects to the predictable port first receives the file an authenticated user downloads, or supplies the content of the file the user uploads.

MobilityDB version 1.3.0 and earlier contains an out-of-bounds read vulnerability in the MEOS binary and library WKB deserialization logic that allows unprivileged database users to crash the PostgreSQL backend process by supplying a crafted WKB payload with a negative length field. The negative length value wraps to a large unsigned size_t due to missing signed validation, bypasses an overflow-unsafe pointer arithmetic bounds check in wkb_parse_state_check(), and causes memcpy() in text_from_wkb_state() to operate with a corrupted unbounded length, resulting in a remote denial-of-service condition affecting all sessions on the PostgreSQL instance.

IBM DataStage on Cloud Pak for Data 5.4.0.0 could allow a remote authenticated attacker to execute arbitrary code due to improper validation of paths during archive extraction.

IBM Guardium Data Protection 12.2 is vulnerable to command injection in the CLI certificate SMIME recipient deletion functionality, allowing an authenticated privileged CLI user to execute arbitrary commands with root privileges.

In Eclipse ThreadX NetX Duo versions 6.0 through 6.5.2.202603a, the NetX Secure TLS client's ServerHello parser and DTLS client's HelloVerifyRequest parser read fields before checking that the message is long enough to contain them. A malicious server or an on-path attacker can make the client read up to three bytes past a handshake message, which can fault the client on targets with memory protection.

IBM Guardium Data Protection 12.2 is vulnerable to command injection in the certificate export CLI functionality, allowing a privileged authenticated CLI user to execute arbitrary commands with root privileges.

In Eclipse ThreadX NetX Duo versions 6.0 through 6.5.2.202603a, the PPP IPCP code parses a peer's Configure-Nak without validating each option's length. A malicious PPP peer can stall the PPP thread indefinitely with a zero-length option, taking the link down, and can read back up to four bytes of packet-buffer memory per exchange with a short address option.

IBM Guardium Data Protection 12.2 is vulnerable to command injection in the SNMP alert notification functionality. An authenticated attacker who can influence policy alert text can cause attacker-controlled data to be executed as operating system commands by the SNMP alerter service, which runs with root privileges.

In Eclipse ThreadX NetX Duo versions 6.4.0 through 6.5.2.202603a, built with VLAN and SRP support, the MSRP parser uses the attribute list length from the received frame without comparing it with the packet length. An unauthenticated station on the same Layer 2 segment can send a short MSRP frame declaring a long list and make the MRP worker read far past the received packet, faulting it on targets with memory protection.

In Eclipse ThreadX NetX Duo versions 6.4.0 through 6.5.2.202603a, built with VLAN and SRP support, evicting the last attribute in an MRP participant's list writes through a null successor pointer. An unauthenticated station on the same Layer 2 segment can fault the MRP worker thread by declaring one MSRP attribute and withdrawing it, and ordinary withdrawals by legitimate stations reach the same path.

In Eclipse ThreadX NetX Duo versions 6.4.0 through 6.5.2.202603a, built with VLAN and SRP support, the MSRP attribute lookup writes through the null pointer returned by its allocator when the ten-entry attribute table is full. An unauthenticated station on the same Layer 2 segment can fault the MRP worker thread by declaring enough new attributes, and Talker Failed declarations hold table entries that are never released.

IBM Guardium Data Protection 12.2 is vulnerable to path traversal and arbitrary file deletion in the Datasource REST component. An authenticated remote attacker could exploit this vulnerability to delete files and potentially cause denial of service or impact system integrity.

In Eclipse ThreadX NetX Duo versions 6.0 through 6.5.2.202603a, the FTP client in IPv4 passive mode opens its data connection to whatever address the server names in its 227 reply instead of the server it is talking to. A malicious FTP server can make the client connect to any host and port the device can reach, using it to scan the internal network and to deliver uploads to internal services.

Improper link resolution (CWE-59 / CWE-22) in the allowedLocalRoots path validation in Google MCP Toolbox for Databases versions 1.2.0 through 1.9.0 allows a remote authenticated attacker with tool execution permissions to bypass directory boundary restrictions via symbolic links. Because path validation checks directories lexically without resolving symbolic links first, an attacker can access or overwrite arbitrary local files located outside the permitted root directories.

In Eclipse ThreadX NetX Duo versions 6.0 through 6.5.2.202603a, the TFTP client copies the message of a received ERROR packet without bounding the copy by the end of the datagram, and the TFTP server reads one byte past a minimal ERROR packet. A malicious TFTP server can make the client copy up to 64 bytes of adjacent packet-pool memory into the error string the application retrieves, or fault on targets with memory protection.

In Eclipse ThreadX NetX Duo versions 6.0 through 6.5.2.202603a, the DHCP client's option walk advances its offset one byte less than its read pointer for every option it skips. A DHCP server, or any host on the link that answers first, can make the client read up to about a kilobyte past the received message, and the same walk copies out-of-bounds bytes into the application's buffer when it retrieves a user option.

The cleanup of tempfile.TemporaryDirectory is vulnerable to a race condition. An attacker who can modify the tree during cleanup can replace a directory with a symbolic link, causing files outside of the temporary directory to be deleted or have their permissions and file flags reset, with the privileges of the process performing the cleanup. Note that platforms where shutil.rmtree.avoids_symlink_attacks is false, remain affected, and file flags may still be reset outside of the tree on all platforms.

In Eclipse ThreadX NetX Duo versions 6.0 through 6.5.2.202603a, the NetX Secure DTLS server fills HelloVerifyRequest cookies from NX_RAND(), by default the C library rand(), with no key and no binding to the client. An attacker who can predict the generator's output can pass the cookie exchange from a spoofed address and make the server send its handshake flight to a victim, using it as a traffic reflector.

In Eclipse ThreadX NetX Duo versions up to and including 6.5.2.202603, the SNMP agent's OID parser uses a multi-byte BER length from the request without checking it against the bytes present, and reads past the end of the packet buffer. A remote, unauthenticated attacker can send a crafted SNMP request that makes the agent read adjacent memory into its OID state, faulting the agent on targets with memory protection.