CVE Feed

Improper Access Control Tampering Vulnerability using ImportAlert function which can lead to a Remote Code Execution (RCE) from the Alerts Settings page.

The Zoomsounds plugin <= 6.45 for WordPress allows arbitrary files, including sensitive configuration files such as wp-config.php, to be downloaded via the `dzsap_download` action using directory traversal in the `link` parameter.

Command Injection vulnerability in EmailWebPage API which can lead to a Remote Code Execution (RCE) from the Alerts Settings page.

ExportToPdfCmd Arbitrary File Read Information Disclosure Vulnerability using ImportAlert function within the Alerts Settings page.

Missing Release of Resource after Effective Lifetime vulnerability in OpenSSL implementation of WAGO 750-831/xxx-xxx, 750-880/xxx-xxx, 750-881, 750-889 in versions FW4 up to FW15 allows an unauthenticated attacker to cause DoS on the device.

This vulnerability allows an attacker who has access to the WBM to read and write settings-parameters of the device by sending specifically constructed requests without authentication on multiple WAGO PLCs in firmware versions up to FW07.

In PEPPERL+FUCHS WirelessHART-Gateway 3.0.7 to 3.0.9 the SSH and telnet services are active with hard-coded credentials.

Any cookie-stealing vulnerabilities within the application or browser would enable an attacker to steal the user's credentials to the PEPPERL+FUCHS WirelessHART-Gateway 3.0.9.

In PEPPERL+FUCHS WirelessHART-Gateway 3.0.8 and 3.0.9 the HttpOnly attribute is not set on a cookie. This allows the cookie's value to be read or set by client-side JavaScript.

In PEPPERL+FUCHS WirelessHART-Gateway 3.0.8 it is possible to inject arbitrary JavaScript into the application's response.

In PEPPERL+FUCHS WirelessHART-Gateway <= 3.0.8 serious issue exists, if the application is not externally accessible or uses IP-based access restrictions. Attackers can use DNS Rebinding to bypass any IP or firewall based access restrictions that may be in place, by proxying through their target's browser.

In PEPPERL+FUCHS WirelessHART-Gateway <= 3.0.9 a form contains a password field with autocomplete enabled. The stored credentials can be captured by an attacker who gains control over the user's computer. Therefore the user must have logged in at least once.

In PEPPERL+FUCHS WirelessHART-Gateway <= 3.0.8 a vulnerability may allow remote attackers to rewrite links and URLs in cached pages to arbitrary strings.

In PEPPERL+FUCHS WirelessHART-Gateway <= 3.0.7 the filename parameter is vulnerable to unauthenticated path traversal attacks, enabling read access to arbitrary files on the server.

An issue was discovered in Form Tools through 3.0.20. A low-privileged user can trigger Reflected XSS when a viewing a form via the submission_id parameter, e.g., clients/forms/edit_submission.php?form_id=1&view_id=1&submission_id=[XSS].

An issue was discovered in Form Tools through 3.0.20. When an administrator creates a customer account, it is possible for the customer to log in and proceed with a change of name and last name. However, these fields are vulnerable to XSS payload insertion, being triggered in the admin panel when the admin tries to see the client list. This type of XSS (stored) can lead to the extraction of the PHPSESSID cookie belonging to the admin.

An issue was discovered in Form Tools through 3.0.20. SQL Injection can occur via the export_group_id field when a low-privileged user (client) tries to export a form with data, e.g., manipulation of modules/export_manager/export.php?export_group_id=1&export_group_1_results=all&export_type_id=1.

A stored XSS vulnerability was discovered in the ECT Provider in OutSystems before 2020-09-04, affecting generated applications. It could allow an unauthenticated remote attacker to craft and store malicious Feedback content into /ECT_Provider/, such that when the content is viewed (it can only be viewed by Administrators), attacker-controlled JavaScript will execute in the security context of an administrator's browser. This is fixed in Outsystems 10.0.1005.2, Outsystems 11.9.0 Platform Server, and Outsystems 11.7.0 LifeTime Management Console.

KRAMER VIAware through August 2021 allows remote attackers to execute arbitrary code because ajaxPages/writeBrowseFilePathAjax.php accepts arbitrary executable pathnames (even though browseSystemFiles.php is no longer reachable via the GUI). NOTE: this issue exists because of an incomplete fix for CVE-2019-17124.

A cross site scripting (XSS) issue in EasyCorp ZenTao 12.5.3 allows remote attackers to execute arbitrary web script via various areas such as data-link-creator.

A cross-site request forgery (CSRF) vulnerability in the Cron job tab in EasyCorp ZenTao 12.5.3 allows attackers to update the fields of a Cron job.

The Cron job tab in EasyCorp ZenTao 12.5.3 allows remote attackers (who have admin access) to execute arbitrary code by setting the type parameter to System.

A locking protection bypass flaw was found in some versions of gnome-shell as shipped within CentOS Stream 8, when the "Application menu" or "Window list" GNOME extensions are enabled. This flaw allows a physical attacker who has access to a locked system to kill existing applications and start new ones as the locked user, even if the session is still locked.

This affects the package jsonpointer before 5.0.0. A type confusion vulnerability can lead to a bypass of a previous Prototype Pollution fix when the pointer components are arrays.

This affects all versions of package json-pointer. A type confusion vulnerability can lead to a bypass of CVE-2020-7709 when the pointer components are arrays.

HashiCorp Vault Enterprise 0.9.2 through 1.6.2 allowed the read of license metadata from DR secondaries without authentication. Fixed in 1.6.3.

The npm package "tar" (aka node-tar) before versions 4.4.18, 5.0.10, and 6.1.9 has an arbitrary file creation/overwrite and arbitrary code execution vulnerability. node-tar aims to guarantee that any file whose location would be modified by a symbolic link is not extracted. This is, in part, achieved by ensuring that extracted directories are not symlinks. Additionally, in order to prevent unnecessary stat calls to determine whether a given path is a directory, paths are cached when directories are created. This logic was insufficient when extracting tar files that contained both a directory and a symlink with names containing unicode values that normalized to the same value. Additionally, on Windows systems, long path portions would resolve to the same file system entities as their 8.3 "short path" counterparts. A specially crafted tar archive could thus include a directory with one form of the path, followed by a symbolic link with a different string that resolves to the same file system entity, followed by a file using the first form. By first creating a directory, and then replacing that directory with a symlink that had a different apparent name that resolved to the same entry in the filesystem, it was thus possible to bypass node-tar symlink checks on directories, essentially allowing an untrusted tar file to symlink into an arbitrary location and subsequently extracting arbitrary files into that location, thus allowing arbitrary file creation and overwrite. These issues were addressed in releases 4.4.18, 5.0.10 and 6.1.9. The v3 branch of node-tar has been deprecated and did not receive patches for these issues. If you are still using a v3 release we recommend you update to a more recent version of node-tar. If this is not possible, a workaround is available in the referenced GHSA-qq89-hq3f-393p.

An issue was discovered in OpenStack Neutron before 16.4.1, 17.x before 17.2.1, and 18.x before 18.1.1. Authenticated attackers can reconfigure dnsmasq via a crafted extra_dhcp_opts value.

A null pointer de-reference was found in the way samba kerberos server handled missing sname in TGS-REQ (Ticket Granting Server - Request). An authenticated user could use this flaw to crash the samba server.

axios is vulnerable to Inefficient Regular Expression Complexity

The npm package "tar" (aka node-tar) before versions 4.4.16, 5.0.8, and 6.1.7 has an arbitrary file creation/overwrite and arbitrary code execution vulnerability. node-tar aims to guarantee that any file whose location would be modified by a symbolic link is not extracted. This is, in part, achieved by ensuring that extracted directories are not symlinks. Additionally, in order to prevent unnecessary stat calls to determine whether a given path is a directory, paths are cached when directories are created. This logic was insufficient when extracting tar files that contained both a directory and a symlink with the same name as the directory, where the symlink and directory names in the archive entry used backslashes as a path separator on posix systems. The cache checking logic used both `\` and `/` characters as path separators, however `\` is a valid filename character on posix systems. By first creating a directory, and then replacing that directory with a symlink, it was thus possible to bypass node-tar symlink checks on directories, essentially allowing an untrusted tar file to symlink into an arbitrary location and subsequently extracting arbitrary files into that location, thus allowing arbitrary file creation and overwrite. Additionally, a similar confusion could arise on case-insensitive filesystems. If a tar archive contained a directory at `FOO`, followed by a symbolic link named `foo`, then on case-insensitive file systems, the creation of the symbolic link would remove the directory from the filesystem, but _not_ from the internal directory cache, as it would not be treated as a cache hit. A subsequent file entry within the `FOO` directory would then be placed in the target of the symbolic link, thinking that the directory had already been created. These issues were addressed in releases 4.4.16, 5.0.8 and 6.1.7. The v3 branch of node-tar has been deprecated and did not receive patches for these issues. If you are still using a v3 release we recommend you update to a more recent version of node-tar. If this is not possible, a workaround is available in the referenced GHSA-9r2w-394v-53qc.

The npm package "tar" (aka node-tar) before versions 4.4.18, 5.0.10, and 6.1.9 has an arbitrary file creation/overwrite and arbitrary code execution vulnerability. node-tar aims to guarantee that any file whose location would be outside of the extraction target directory is not extracted. This is, in part, accomplished by sanitizing absolute paths of entries within the archive, skipping archive entries that contain `..` path portions, and resolving the sanitized paths against the extraction target directory. This logic was insufficient on Windows systems when extracting tar files that contained a path that was not an absolute path, but specified a drive letter different from the extraction target, such as `C:some\path`. If the drive letter does not match the extraction target, for example `D:\extraction\dir`, then the result of `path.resolve(extractionDirectory, entryPath)` would resolve against the current working directory on the `C:` drive, rather than the extraction target directory. Additionally, a `..` portion of the path could occur immediately after the drive letter, such as `C:../foo`, and was not properly sanitized by the logic that checked for `..` within the normalized and split portions of the path. This only affects users of `node-tar` on Windows systems. These issues were addressed in releases 4.4.18, 5.0.10 and 6.1.9. The v3 branch of node-tar has been deprecated and did not receive patches for these issues. If you are still using a v3 release we recommend you update to a more recent version of node-tar. There is no reasonable way to work around this issue without performing the same path normalization procedures that node-tar now does. Users are encouraged to upgrade to the latest patched versions of node-tar, rather than attempt to sanitize paths themselves.

`@npmcli/arborist`, the library that calculates dependency trees and manages the node_modules folder hierarchy for the npm command line interface, aims to guarantee that package dependency contracts will be met, and the extraction of package contents will always be performed into the expected folder. This is accomplished by extracting package contents into a project's `node_modules` folder. If the `node_modules` folder of the root project or any of its dependencies is somehow replaced with a symbolic link, it could allow Arborist to write package dependencies to any arbitrary location on the file system. Note that symbolic links contained within package artifact contents are filtered out, so another means of creating a `node_modules` symbolic link would have to be employed. 1. A `preinstall` script could replace `node_modules` with a symlink. (This is prevented by using `--ignore-scripts`.) 2. An attacker could supply the target with a git repository, instructing them to run `npm install --ignore-scripts` in the root. This may be successful, because `npm install --ignore-scripts` is typically not capable of making changes outside of the project directory, so it may be deemed safe. This is patched in @npmcli/arborist 2.8.2 which is included in npm v7.20.7 and above. For more information including workarounds please see the referenced GHSA-gmw6-94gg-2rc2.

In the server in SerNet verinice before 1.22.2, insecure Java deserialization allows remote authenticated attackers to execute arbitrary code.

`@npmcli/arborist`, the library that calculates dependency trees and manages the `node_modules` folder hierarchy for the npm command line interface, aims to guarantee that package dependency contracts will be met, and the extraction of package contents will always be performed into the expected folder. This is, in part, accomplished by resolving dependency specifiers defined in `package.json` manifests for dependencies with a specific name, and nesting folders to resolve conflicting dependencies. When multiple dependencies differ only in the case of their name, Arborist's internal data structure saw them as separate items that could coexist within the same level in the `node_modules` hierarchy. However, on case-insensitive file systems (such as macOS and Windows), this is not the case. Combined with a symlink dependency such as `file:/some/path`, this allowed an attacker to create a situation in which arbitrary contents could be written to any location on the filesystem. For example, a package `pwn-a` could define a dependency in their `package.json` file such as `"foo": "file:/some/path"`. Another package, `pwn-b` could define a dependency such as `FOO: "file:foo.tgz"`. On case-insensitive file systems, if `pwn-a` was installed, and then `pwn-b` was installed afterwards, the contents of `foo.tgz` would be written to `/some/path`, and any existing contents of `/some/path` would be removed. Anyone using npm v7.20.6 or earlier on a case-insensitive filesystem is potentially affected. This is patched in @npmcli/arborist 2.8.2 which is included in npm v7.20.7 and above.

Next.js is a React framework. Versions of Next.js between 10.0.0 and 11.0.0 contain a cross-site scripting vulnerability. In order for an instance to be affected by the vulnerability, the `next.config.js` file must have `images.domains` array assigned and the image host assigned in `images.domains` must allow user-provided SVG. If the `next.config.js` file has `images.loader` assigned to something other than default or the instance is deployed on Vercel, the instance is not affected by the vulnerability. The vulnerability is patched in Next.js version 11.1.1.

Geyser is a bridge between Minecraft: Bedrock Edition and Minecraft: Java Edition. Versions of Geyser prior to 1.4.2-SNAPSHOT allow anyone that can connect to the server to forge a LoginPacket with manipulated JWT token allowing impersonation as any user. Version 1.4.2-SNAPSHOT contains a patch for the issue. There are no known workarounds aside from upgrading.

A remote code execution (RCE) vulnerability in the \Playsong.php component of cscms v4.1 allows attackers to execute arbitrary commands.

Rocket.Chat is an open-source fully customizable communications platform developed in JavaScript. In Rocket.Chat before versions 3.11.3, 3.12.2, and 3.13 an issue with certain regular expressions could lead potentially to Denial of Service. This was fixed in versions 3.11.3, 3.12.2, and 3.13.

Total.js framework (npm package total.js) is a framework for Node.js platfrom written in pure JavaScript similar to PHP's Laravel or Python's Django or ASP.NET MVC. In total.js framework before version 3.4.9, calling the utils.set function with user-controlled values leads to code-injection. This can cause a variety of impacts that include arbitrary code execution. This is fixed in version 3.4.9.

HedgeDoc is a platform to write and share markdown. In versions prior to 1.9.0, an unauthenticated attacker can inject arbitrary JavaScript into the speaker-notes of the slide-mode feature by embedding an iframe hosting the malicious code into the slides or by embedding the HedgeDoc instance into another page. The problem is patched in version 1.9.0. There are no known workarounds aside from upgrading.

libjxl v0.3.7 is affected by a Divide By Zero in issue in lib/extras/codec_apng.cc jxl::DecodeImageAPNG(). When encoding a malicous APNG file using cjxl, an attacker can trigger a denial of service.

libjxl v0.5.0 is affected by a Assertion failed issue in lib/jxl/image.cc jxl::PlaneBase::PlaneBase(). When encoding a malicous GIF file using cjxl, an attacker can trigger a denial of service.

Rundeck is an open source automation service with a web console, command line tools and a WebAPI. Prior to version 3.3.14 and version 3.4.3, a user with `admin` access to the `system` resource type is potentially vulnerable to a CSRF attack that could cause the server to run untrusted code on all Rundeck editions. Patches are available in Rundeck versions 3.4.3 and 3.3.14.

Rundeck is an open source automation service with a web console, command line tools and a WebAPI. Prior to version 3.3.14 and version 3.4.3, an authorized user can upload a zip-format plugin with a crafted plugin.yaml, or a crafted aclpolicy yaml file, or upload an untrusted project archive with a crafted aclpolicy yaml file, that can cause the server to run untrusted code on Rundeck Community or Enterprise Edition. An authenticated user can make a POST request, that can cause the server to run untrusted code on Rundeck Enterprise Edition. The zip-format plugin issues requires authentication and authorization to these access levels, and affects all Rundeck editions:`admin` level access to the `system` resource type. The ACL Policy yaml file upload issues requires authentication and authorization to these access levels, and affects all Rundeck editions: `create` `update` or `admin` level access to a `project_acl` resource, and/or`create` `update` or `admin` level access to the `system_acl` resource. The unauthorized POST request requires authentication, but no specific authorization, and affects Rundeck Enterprise only. Patches are available in versions 3.4.3, 3.3.14

A Shell Metacharacter Injection vulnerability in result.php in DRK Odenwaldkreis Testerfassung March-2021 allow an attacker with a valid token of a COVID-19 test result to execute shell commands with the permissions of the web server.

Multiple cross-site scripting (XSS) vulnerabilities in DRK Odenwaldkreis Testerfassung March-2021 allow remote attackers to inject arbitrary web script or HTML via all parameters to HTML form fields in all components.

An issue was discovered in Midnight Commander through 4.8.26. When establishing an SFTP connection, the fingerprint of the server is neither checked nor displayed. As a result, a user connects to the server without the ability to verify its authenticity.

An issue was discovered in EdgeGallery/developer before v1.0. There is a "Deserialization of yaml file" vulnerability that can allow attackers to execute system command through uploading the malicious constructed YAML file.

Zoho ManageEngine ADSelfService Plus 6103 and prior is vulnerable to admin portal access-restriction bypass.