CVE Feed

In the Linux kernel, the following vulnerability has been resolved: netfilter: bridge: eb_tables: close module init race sashiko reports for unrelated patch: Does the core ebtables initialization in ebtables.c suffer from a similar race? Once nf_register_sockopt() completes, the sockopts are exposed globally. sockopt has to be registered last, just like in ip/ip6/arptables.

In the Linux kernel, the following vulnerability has been resolved: fprobe: Fix unregister_fprobe() to wait for RCU grace period Commit 4346ba1604093 ("fprobe: Rewrite fprobe on function-graph tracer") changed fprobe to register struct fprobe to an rcu-hlist, but it forgot to wait for RCU GP. Thus there can be use-after-free if the fprobe is released right after unregistering. This can be happened on fprobe event and sample module code. To fix this issue, add synchronize_rcu() in unregister_fprobe(). Note that BPF is OK because fprobe is used as a part of bpf_kprobe_multi_link. This unregisters its fprobe in bpf_kprobe_multi_link_release() and it is deallocated via bpf_kprobe_multi_link_dealloc(), which is invoked from bpf_link_defer_dealloc_rcu_gp() RCU callback. For BPF, this also introduced unregister_fprobe_async() which does NOT wait for RCU grace priod.

In the Linux kernel, the following vulnerability has been resolved: fs/statmount: fix slab out-of-bounds write in statmount_mnt_idmap statmount_mnt_idmap() writes one mapping with seq_printf() and then manually advances seq->count to include the NUL separator. If seq_printf() overflows, seq_set_overflow() sets seq->count to seq->size. The manual seq->count++ changes this to seq->size + 1. seq_has_overflowed() then no longer detects the overflow. The corrupted count returns to statmount_string(), which later executes: seq->buf[seq->count++] = '\0'; This causes a 1-byte NULL out-of-bounds write on the dynamically allocated seq buffer. Fix this by checking for overflow immediately after seq_printf().

In the Linux kernel, the following vulnerability has been resolved: irq_work: Fix use-after-free in irq_work_single() on PREEMPT_RT On PREEMPT_RT, non-HARD irq_work runs in per-CPU kthreads via run_irq_workd(), so irq_work_sync() uses rcuwait() to wait for BUSY==0. After irq_work_single() clears BUSY via atomic_cmpxchg(), it still dereferences @work for irq_work_is_hard() and rcuwait_wake_up(). An irq_work_sync() caller on another CPU that enters after BUSY is cleared can observe BUSY==0 immediately, return, and free the work before those accesses complete — causing a use-after-free. Fix this by wrapping run_irq_workd() in guard(rcu)() so that the entire irq_work_single() execution is within an RCU read-side critical section. Then add synchronize_rcu() in irq_work_sync() after rcuwait_wait_event() to ensure the caller waits for the RCU grace period before returning, preventing premature frees.

In the Linux kernel, the following vulnerability has been resolved: nvme: fix bio leak on mapping failure The local bio is always NULL, so we'd leak the bio if the integrity mapping failed. Just get it directly from the request.

In the Linux kernel, the following vulnerability has been resolved: nvme-pci: fix use-after-free in nvme_free_host_mem() nvme_free_host_mem() frees dev->hmb_sgt via dma_free_noncontiguous() but never clears the pointer afterward. This leads to a use-after-free if nvme_free_host_mem() is called twice in the same error path. This can happen during nvme_probe() when nvme_setup_host_mem() succeeds in allocating the HMB (setting dev->hmb_sgt) but nvme_set_host_mem() fails with an I/O error: nvme_setup_host_mem() nvme_alloc_host_mem_single() -> sets dev->hmb_sgt nvme_set_host_mem() -> fails with -EIO nvme_free_host_mem() -> frees hmb_sgt, but does NOT NULL it return error nvme_probe() error path: nvme_free_host_mem() -> dev->hmb_sgt is stale, use-after-free The second call dereferences the freed sgt, causing a NULL pointer dereference in iommu_dma_free_noncontiguous() when it accesses sgt->sgl->dma_address (the backing memory has been freed and zeroed). This is reproducible on Thunderbolt-attached NVMe devices (e.g., OWC Envoy Express behind a Dell WD22TB4 dock) where the device intermittently returns I/O errors during HMB setup due to PCIe link instability. BUG: kernel NULL pointer dereference, address: 0000000000000010 RIP: 0010:iommu_dma_free_noncontiguous+0x22/0x80 Call Trace: <TASK> dma_free_noncontiguous+0x3b/0x130 nvme_free_host_mem+0x30/0xf0 [nvme] nvme_probe.cold+0xcc/0x275 [nvme] local_pci_probe+0x43/0xa0 pci_device_probe+0xeea/0x290 really_probe+0xf9/0x3b0 __driver_probe_device+0x8b/0x170 driver_probe_device+0x24/0xd0 __driver_attach_async_helper+0x6b/0x110 async_run_entry_fn+0x37/0x170 process_one_work+0x1ac/0x3d0 worker_thread+0x1b8/0x360 kthread+0xf7/0x130 ret_from_fork+0x2d8/0x3a0 ret_from_fork_asm+0x1a/0x30 </TASK> Fix this by setting dev->hmb_sgt to NULL after freeing it, so the second call takes the multi-descriptor path which safely handles the already-cleaned-up state.

In the Linux kernel, the following vulnerability has been resolved: powerpc/hv-gpci: fix preempt count leak in sysfs show paths Four sysfs show() callbacks in hv-gpci take get_cpu_var(hv_gpci_reqb) (which calls preempt_disable()) but only call the matching put_cpu_var() on the error path under the 'out:' label. Every successful read leaks one preempt_disable(): processor_bus_topology_show() processor_config_show() affinity_domain_via_virtual_processor_show() affinity_domain_via_domain_show() (affinity_domain_via_partition_show() was already correct.) On a CONFIG_PREEMPT=y kernel, repeated reads raise preempt_count and eventually return to userspace with preemption still disabled. The next user-mode page fault then hits faulthandler_disabled() == 1, gets forced to SIGSEGV, and the resulting coredump trips 'BUG: scheduling while atomic' in call_usermodehelper_exec -> wait_for_completion_state -> schedule: BUG: scheduling while atomic: <task>/<pid>/0x00000004 ... __schedule_bug+0x6c/0x90 __schedule+0x58c/0x13a0 schedule+0x48/0x1a0 schedule_timeout+0x104/0x170 wait_for_completion_state+0x16c/0x330 call_usermodehelper_exec+0x254/0x2d0 vfs_coredump+0x1050/0x2590 get_signal+0xb9c/0xc80 do_notify_resume+0xf8/0x470 Add an out_success label that calls put_cpu_var() before returning the byte count, mirroring affinity_domain_via_partition_show().

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix cancellation of a DIO and single read subrequests When the preparation of a new subrequest for a read fails, if the subrequest has already been added to the stream->subrequests list, it can't simply be put and abandoned as the collector may see it. Also, if it hasn't been queued yet, it has two outstanding refs that both need to be put. Both DIO read and single-read dispatch fail at this; further, both differ in the order they do things to the way buffered read works. Fix cancellation of both DIO-read and single-read subrequests that failed preparation by the following steps: (1) Harmonise all three reads (buffered, dio, single) to queue the subreq before prepping it. (2) Make all three call netfs_queue_read() to do the queuing. (3) Set NETFS_RREQ_ALL_QUEUED independently of the queuing as we don't know the length of the subreq at this point. (4) In all cases, set the error and NETFS_SREQ_FAILED flag on the subreq and then call netfs_read_subreq_terminated() to deal with it. This will pass responsibility off to the collector for dealing with it.

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix missing barriers when accessing stream->subrequests locklessly The list of subrequests attached to stream->subrequests is accessed without locks by netfs_collect_read_results() and netfs_collect_write_results(), and then they access subreq->flags without taking a barrier after getting the subreq pointer from the list. Relatedly, the functions that build the list don't use any sort of write barrier when constructing the list to make sure that the NETFS_SREQ_IN_PROGRESS flag is perceived to be set first if no lock is taken. Fix this by: (1) Add a new list_add_tail_release() function that uses a release barrier to set the pointer to the new member of the list. (2) Add a new list_first_entry_or_null_acquire() function that uses an acquire barrier to read the pointer to the first member in a list (or return NULL). (3) Use list_add_tail_release() when adding a subreq to ->subrequests. (4) Use list_first_entry_or_null_acquire() when initially accessing the front of the list (when an item is removed, the pointer to the new front iterm is obtained under the same lock).

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix netfs_read_to_pagecache() to pause on subreq failure Fix netfs_read_to_pagecache() so that it pauses the generation of new subrequests if an already-issued subrequest fails.

In the Linux kernel, the following vulnerability has been resolved: netfs: fix VM_BUG_ON_FOLIO() issue in netfs_write_begin() call The multiple runs of generic/013 test-case is capable to reproduce a kernel BUG at mm/filemap.c:1504 with probability of 30%. while true; do sudo ./check generic/013 done [ 9849.452376] page: refcount:3 mapcount:0 mapping:00000000e58ff252 index:0x10781 pfn:0x1c322 [ 9849.452412] memcg:ffff8881a1915800 [ 9849.452417] aops:ceph_aops ino:1000058db9e dentry name(?):"f9XXXXXX" [ 9849.452432] flags: 0x17ffffc0000000(node=0|zone=2|lastcpupid=0x1fffff) [ 9849.452441] raw: 0017ffffc0000000 0000000000000000 dead000000000122 ffff88816110d248 [ 9849.452445] raw: 0000000000010781 0000000000000000 00000003ffffffff ffff8881a1915800 [ 9849.452447] page dumped because: VM_BUG_ON_FOLIO(!folio_test_locked(folio)) [ 9849.452474] ------------[ cut here ]------------ [ 9849.452476] kernel BUG at mm/filemap.c:1504! [ 9849.478635] Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI [ 9849.481772] CPU: 2 UID: 0 PID: 84223 Comm: fsstress Not tainted 7.0.0-rc1+ #18 PREEMPT(full) [ 9849.482881] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-9.fc43 06/1 0/2025 [ 9849.484539] RIP: 0010:folio_unlock+0x85/0xa0 [ 9849.485076] Code: 89 df 31 f6 e8 1c f3 ff ff 48 8b 5d f8 c9 31 c0 31 d2 31 f6 31 ff c3 cc cc cc cc 48 c7 c6 80 6c d9 a7 48 89 df e8 4b b3 10 00 <0f> 0b 48 89 df e8 21 e6 2c 00 eb 9d 0f 1f 40 00 66 66 2e 0f 1f 84 [ 9849.493818] RSP: 0018:ffff8881bb8076b0 EFLAGS: 00010246 [ 9849.495740] RAX: 0000000000000000 RBX: ffffea00070c8980 RCX: 0000000000000000 [ 9849.498678] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 9849.500559] RBP: ffff8881bb8076b8 R08: 0000000000000000 R09: 0000000000000000 [ 9849.501097] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000010782000 [ 9849.502108] R13: ffff8881935de738 R14: ffff88816110d010 R15: 0000000000001000 [ 9849.502516] FS: 00007e36cbe94740(0000) GS:ffff88824a899000(0000) knlGS:0000000000000000 [ 9849.502996] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9849.503810] CR2: 000000c0002b0000 CR3: 000000011bbf6004 CR4: 0000000000772ef0 [ 9849.504459] PKRU: 55555554 [ 9849.504626] Call Trace: [ 9849.505242] <TASK> [ 9849.505379] netfs_write_begin+0x7c8/0x10a0 [ 9849.505877] ? __kasan_check_read+0x11/0x20 [ 9849.506384] ? __pfx_netfs_write_begin+0x10/0x10 [ 9849.507178] ceph_write_begin+0x8c/0x1c0 [ 9849.507934] generic_perform_write+0x391/0x8f0 [ 9849.508503] ? __pfx_generic_perform_write+0x10/0x10 [ 9849.509062] ? file_update_time_flags+0x19a/0x4b0 [ 9849.509581] ? ceph_get_caps+0x63/0xf0 [ 9849.510259] ? ceph_get_caps+0x63/0xf0 [ 9849.510530] ceph_write_iter+0xe79/0x1ae0 [ 9849.511282] ? __pfx_ceph_write_iter+0x10/0x10 [ 9849.511839] ? lock_acquire+0x1ad/0x310 [ 9849.512334] ? ksys_write+0xf9/0x230 [ 9849.512582] ? lock_is_held_type+0xaa/0x140 [ 9849.513128] vfs_write+0x512/0x1110 [ 9849.513634] ? __fget_files+0x33/0x350 [ 9849.513893] ? __pfx_vfs_write+0x10/0x10 [ 9849.514143] ? mutex_lock_nested+0x1b/0x30 [ 9849.514394] ksys_write+0xf9/0x230 [ 9849.514621] ? __pfx_ksys_write+0x10/0x10 [ 9849.514887] ? do_syscall_64+0x25e/0x1520 [ 9849.515122] ? __kasan_check_read+0x11/0x20 [ 9849.515366] ? trace_hardirqs_on_prepare+0x178/0x1c0 [ 9849.515655] __x64_sys_write+0x72/0xd0 [ 9849.515885] ? trace_hardirqs_on+0x24/0x1c0 [ 9849.516130] x64_sys_call+0x22f/0x2390 [ 9849.516341] do_syscall_64+0x12b/0x1520 [ 9849.516545] ? do_syscall_64+0x27c/0x1520 [ 9849.516783] ? do_syscall_64+0x27c/0x1520 [ 9849.517003] ? lock_release+0x318/0x480 [ 9849.517220] ? __x64_sys_io_getevents+0x143/0x2d0 [ 9849.517479] ? percpu_ref_put_many.constprop.0+0x8f/0x210 [ 9849.517779] ? entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 9849.518073] ? do_syscall_64+0x25e/0x1520 [ 9849.518291] ? __kasan_check_read+0x11/0x20 [ 9849.518519] ? trace_hardirqs_on_prepare+0x178/0x1c0 [ 9849.518799] ? do_syscall_64+0x27c/0x1520 [ 9 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix streaming write being overwritten In order to avoid reading whilst writing, netfslib will allow "streaming writes" in which dirty data is stored directly into folios without reading them first. Such folios are marked dirty but may not be marked uptodate. If a folio is entirely written by a streaming write, uptodate will be set, otherwise it will have a netfs_folio struct attached to ->private recording the dirty region. In the event that a partially written streaming write page is to be overwritten entirely by a single write(), netfs_perform_write() will try to copy over it, but doesn't discard the netfs_folio if it succeeds; further, it doesn't correctly handle a partial copy that overwrites some of the dirty data. Fix this by the following: (1) If the folio is successfully overwritten, free the netfs_folio struct before marking the page uptodate. (2) If the copy to the folio partially fails, but short of the dirty data, just ignore the copy. (3) If the copy partially fails and overwrites some of the dirty data, accept the copy, update the netfs_folio struct to record the new data. If the folio is now filled, free the netfs_folio and set uptodate, otherwise return a partial write. Found with: fsx -q -N 1000000 -p 10000 -o 128000 -l 600000 \ /xfstest.test/junk --replay-ops=junk.fsxops using the following as junk.fsxops: truncate 0x0 0 0x927c0 write 0x63fb8 0x53c8 0 copy_range 0xb704 0x19b9 0x24429 0x79380 write 0x2402b 0x144a2 0x90660 * write 0x204d5 0x140a0 0x927c0 * copy_range 0x1f72c 0x137d0 0x7a906 0x927c0 * read 0x00000 0x20000 0x9157c read 0x20000 0x20000 0x9157c read 0x40000 0x20000 0x9157c read 0x60000 0x20000 0x9157c read 0x7e1a0 0xcfb9 0x9157c on cifs with the default cache option. It shows folio 0x24 misbehaving if the FMODE_READ check is commented out in netfs_perform_write(): if (//(file->f_mode & FMODE_READ) || netfs_is_cache_enabled(ctx)) { and no fscache. This was initially found with the generic/522 xfstest.

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix potential deadlock in write-through mode Fix netfs_advance_writethrough() to always unlock the supplied folio and to mark it dirty if it isn't yet written to the end. Unfortunately, it can't be marked for writeback until the folio is done with as that may cause a deadlock against mmapped reads and writes. Even though it has been marked dirty, premature writeback can't occur as the caller is holding both inode->i_rwsem (which will prevent concurrent truncation, fallocation, DIO and other writes) and ictx->wb_lock (which will cause flushing to wait and writeback to skip or wait). Note that this may be easier to deal with once the queuing of folios is split from the generation of subrequests.

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix folio->private handling in netfs_perform_write() Under some circumstances, netfs_perform_write() doesn't correctly manipulate folio->private between NULL, NETFS_FOLIO_COPY_TO_CACHE, pointing to a group and pointing to a netfs_folio struct, leading to potential multiple attachments of private data with associated folio ref leaks and also leaks of netfs_folio structs or netfs_group refs. Fix this by consolidating the place at which a folio is marked uptodate in one place and having that look at what's attached to folio->private and decide how to clean it up and then set the new group. Also, the content shouldn't be flushed if group is NULL, even if a group is specified in the netfs_group parameter, as that would be the case for a new folio. A filesystem should always specify netfs_group or never specify netfs_group. The Sashiko auto-review tool noted that it was theoretically possible that the fpos >= ctx->zero_point section might leak if it modified a streaming write folio. This is unlikely, but with a network filesystem, third party changes can happen. It also pointed out that __netfs_set_group() would leak if called multiple times on the same folio from the "whole folio modify section".

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix netfs_read_folio() to wait on writeback Fix netfs_read_folio() to wait for an ongoing writeback to complete so that it can trust the dirty flag and whatever is attached to folio->private (folio->private may get cleaned up by the collector before it clears the writeback flag).

In the Linux kernel, the following vulnerability has been resolved: afs: Fix the locking used by afs_get_link() The afs filesystem in the kernel doesn't do locking correctly for symbolic links. There are a number of problems: (1) It doesn't do any locking around afs_read_single() to prevent races between multiple ->get_link() calls, thereby allowing the possibility of leaks. (2) It doesn't use RCU barriering when accessing the buffer pointers during RCU pathwalk. (3) It can race with another thread updating the contents of the symlink if a third party updated it on the server. Fix this by the following means: (0) Move symlink handling into its own file as this makes it more complicated. (1) Take the validate_lock around afs_read_single() to prevent races between multiple ->get_link() calls. (2) Keep a separate copy of the symlink contents with an rcu_head. This is always going to be a lot smaller than a page, so it can be kmalloc'd and save quite a bit of memory. It also needs a refcount for non-RCU pathwalk. (3) Split the symlink read and write-to-cache routines in afs from those for directories. (4) Discard the I/O buffer as soon as the write-to-cache completes as this is a full page (plus a folio_queue). (5) If there's no cache, discard the I/O buffer immediately after reading and copying if there is no cache.

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: cortina: Make RX SKB per-port The SKB used to assemble packets from fragments in gmac_rx() is static local, but the Gemini has two ethernet ports, meaning there can be races between the ports on a bad day if a device is using both. Make the RX SKB a per-port variable and carry it over between invocations in the port struct instead. Zero the pointer once we call napi_gro_frags(), on error (after calling napi_free_frags()) or if the port is stopped. Zero it in some place where not strictly necessary just to emphasize what is going on. This was found by Sashiko during normal patch review.

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: cortina: Carry over frag counter The gmac_rx() NAPI poll function assembles packets in an SKB from a ring buffer. If the ring buffer gets completely emptied during a poll cycle, we exit gmac_rx(), but the packet is not yet completely assembled in the SKB, yet the fragment counter frag_nr is reset to zero on the next invocation. Solve this by making the RX fragment counter a part of the port struct, and carry it over between invocations. Reset the fragment counter only right after calling napi_gro_frags(), on error (after calling napi_free_frags()) or if stopping the port. Reset it in some place where not strictly necessary just to emphasize what is going on. This was found by Sashiko during normal patch review.

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix early put of sink folio in netfs_read_gaps() Fix netfs_read_gaps() to release the sink page it uses after waiting for the request to complete. The way the sink page is used is that an ITER_BVEC-class iterator is created that has the gaps from the target folio at either end, but has the sink page tiled over the middle so that a single read op can fill in both gaps. The bug was found by KASAN detecting a UAF on the generic/075 xfstest in the cifsd kernel thread that handles reception of data from the TCP socket: BUG: KASAN: use-after-free in _copy_to_iter+0x48a/0xa20 Write of size 885 at addr ffff888107f92000 by task cifsd/1285 CPU: 2 UID: 0 PID: 1285 Comm: cifsd Not tainted 7.0.0 #6 PREEMPT(lazy) Call Trace: dump_stack_lvl+0x5d/0x80 print_report+0x17f/0x4f1 kasan_report+0x100/0x1e0 kasan_check_range+0x10f/0x1e0 __asan_memcpy+0x3c/0x60 _copy_to_iter+0x48a/0xa20 __skb_datagram_iter+0x2c9/0x430 skb_copy_datagram_iter+0x6e/0x160 tcp_recvmsg_locked+0xce0/0x1130 tcp_recvmsg+0xeb/0x300 inet_recvmsg+0xcf/0x3a0 sock_recvmsg+0xea/0x100 cifs_readv_from_socket+0x3a6/0x4d0 [cifs] cifs_read_iter_from_socket+0xdd/0x130 [cifs] cifs_readv_receive+0xaad/0xb10 [cifs] cifs_demultiplex_thread+0x1148/0x1740 [cifs] kthread+0x1cf/0x210

In the Linux kernel, the following vulnerability has been resolved: net: shaper: reject duplicate leaves in GROUP request net_shaper_nl_group_doit() does not deduplicate NET_SHAPER_A_LEAVES entries. When userspace supplies the same leaf handle twice, the same old-parent pointer lands twice in old_nodes[]. The cleanup loop double frees the parent. Of course the same parent may still be in old_nodes[] twice if we are moving multiple of its leaves. Note that this patch also implicitly fixes the fact that the i >= leaves_count path forgets to set ret.

In the Linux kernel, the following vulnerability has been resolved: block: don't overwrite bip_vcnt in bio_integrity_copy_user() bio_integrity_add_page() already sets bip_vcnt to 1 for the bounce segment. Overwriting it with nr_vecs breaks bip_vcnt <= bip_max_vcnt on WRITE (bip_max_vcnt is 1), so the gap-merge checks in block/blk.h read past the bip_vec[] flex array. On READ the read is in bounds but lands on a saved user bvec instead of the bounce. The line was added for split propagation, but bio_integrity_clone() doesn't copy bip_vcnt and BIP_CLONE_FLAGS excludes BIP_COPY_USER.

In the Linux kernel, the following vulnerability has been resolved: block: bio-integrity: Fix null-ptr-deref in bio_integrity_map_user() pin_user_pages_fast() can partially succeed and return the number of pages that were actually pinned. However, the bio_integrity_map_user() does not handle this partial pinning. This leads to a general protection fault since bvec_from_pages() dereferences an unpinned page address, which is 0. To fix this, add a check to verify that all requested memory is pinned. If partial pinning occurs, unpin the memory and return -EFAULT. Kernel Oops: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 UID: 0 PID: 1061 Comm: nvme-passthroug Not tainted 7.0.0-11783-g90957f9314e8-dirty #16 PREEMPT(lazy) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014 RIP: 0010:bio_integrity_map_user.cold+0x1b0/0x9d6

In the Linux kernel, the following vulnerability has been resolved: accel/qaic: Add overflow check to remap_pfn_range during mmap The call to remap_pfn_range in qaic_gem_object_mmap is susceptible to (re)mapping beyond the VMA if the BO is too large. This can cause use after free issues when munmap() unmaps only the VMA region and not the additional mappings. To prevent this, check the remaining size of the VMA before remapping and truncate the remapped length if sg->length is too large. [jhugo: fix braces from checkpatch --strict]

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix leak of request in netfs_write_begin() error handling Fix netfs_write_begin() to not leak our ref on the request in the event that we get an error from netfs_wait_for_read().

In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: don't mix devm and drmm functions Mixing devm and drmm functions will result in a use-after-free on msm driver teardown if userspace keeps a reference on the drm device: The WB connector data will be destroyed because of the use of devm_kzalloc()), while the usersoace still can try interacting with the WB connector (which uses drmm_ functions). Change dpu_writeback_init() to use drmm_. Patchwork: https://patchwork.freedesktop.org/patch/722656/

In the Linux kernel, the following vulnerability has been resolved: drm/msm/adreno: fix userspace-triggered crash on a2xx-a4xx Before a5xx Adreno driver will not try fetching UBWC params (because those generations didn't support UBWC anyway), however it's still possible to query UBWC-related params from the userspace, triggering possible NULL pointer dereference. Check for UBWC config in adreno_get_param() and return sane defaults if there is none. Patchwork: https://patchwork.freedesktop.org/patch/717778/

In the Linux kernel, the following vulnerability has been resolved: net: tls: fix off-by-one in sg_chain entry count for wrapped sk_msg ring When an sk_msg scatterlist ring wraps (sg.end < sg.start), tls_push_record() chains the tail portion of the ring to the head using sg_chain(). An extra entry in the sg array is reserved for this: struct sk_msg_sg { [...] /* The extra two elements: * 1) used for chaining the front and sections when the list becomes * partitioned (e.g. end < start). The crypto APIs require the * chaining; * 2) to chain tailer SG entries after the message. */ struct scatterlist data[MAX_MSG_FRAGS + 2]; The current code uses MAX_SKB_FRAGS + 1 as the ring size: sg_chain(&msg_pl->sg.data[msg_pl->sg.start], MAX_SKB_FRAGS - msg_pl->sg.start + 1, msg_pl->sg.data); This places the chain pointer at sg_chain(data[start], (MAX_SKB_FRAGS - msg_start + 1) .. = &data[start] + (MAX_SKB_FRAGS - msg_start + 1) - 1 = data[start + (MAX_SKB_FRAGS - start + 1) - 1] = data[MAX_SKB_FRAGS] instead of the true last entry. This is likely due to a "race" of the commit under Fixes landing close to commit 031097d9e079 ("bpf: sk_msg, zap ingress queue on psock down") Convert to ARRAY_SIZE and drop the data[start] / - start (as suggested by Sabrina).

In the Linux kernel, the following vulnerability has been resolved: net: tls: prevent chain-after-chain in plain text SG Sashiko points out that if end = 0 (start != 0) the current code will create a chain link to content type right after the wrap link: This would create a chain where the wrap link points directly to another chain link. The scatterlist API sg_next iterator does not recursively resolve consecutive chain links. meaning this is illegal input to crypto. The wrapping link is unnecessary if end = 0. end is the entry after the last one used so end = 0 means there's nothing pushed after the wrap: end start i v v v [ ]...[ ][ d ][ d ][ d ][ d ][rsv for wrap] Skip the wrapping in this case. TLS 1.3 can use the "wrapping slot" for it's chaining if end = 0. This avoids the chain-after-chain. Move the wrap chaining before marking END and chaining off content type, that feels like more logical ordering to me, but should not matter from functional perspective.

In the Linux kernel, the following vulnerability has been resolved: net/smc: reject CHID-0 ACCEPT that matches an empty ism_dev slot On the SMC-D client, slot 0 of ini->ism_dev[]/ini->ism_chid[] is reserved for an SMC-Dv1 device. smc_find_ism_v2_device_clnt() populates V2 entries starting at index 1, so when no V1 device is selected slot 0 is left in its kzalloc()'ed state with ism_dev[0] == NULL and ism_chid[0] == 0. smc_v2_determine_accepted_chid() then matches the peer's CHID against the array starting from index 0 using the CHID alone. A malicious peer replying to a SMC-Dv2-only proposal with d1.chid == 0 matches the empty slot, ini->ism_selected becomes 0, and the subsequent ism_dev[0]->lgr_lock dereference in smc_conn_create() faults at offsetof(struct smcd_dev, lgr_lock) == 0x68: BUG: KASAN: null-ptr-deref in _raw_spin_lock_bh+0x79/0xe0 Write of size 4 at addr 0000000000000068 by task exploit/144 Call Trace: _raw_spin_lock_bh smc_conn_create (net/smc/smc_core.c:1997) __smc_connect (net/smc/af_smc.c:1447) smc_connect (net/smc/af_smc.c:1720) __sys_connect __x64_sys_connect do_syscall_64 Require ism_dev[i] to be non-NULL before accepting a CHID match.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix SID memory leak in set_posix_acl_entries_dacl() on overflow Commit 299f962c0b02 ("ksmbd: use check_add_overflow() to prevent u16 DACL size overflow") added check_add_overflow() guards that break out of the ACE-building loops in set_posix_acl_entries_dacl() when the accumulated DACL size would wrap past 65535. However, each iteration allocates a struct smb_sid via kmalloc_obj() at the top of the loop and relies on the kfree(sid) call at the end of the loop body (the 'pass_same_sid' label in the first loop, and the explicit kfree at the tail of the second loop) to release it. The newly introduced 'break' statements bypass those kfree() calls, leaking the sid buffer every time an overflow is detected. A malicious or malformed file with enough POSIX ACL entries to trip the overflow check will leak one or more struct smb_sid allocations on every request that touches the file's DACL, providing a trivial kernel memory exhaustion vector. Free sid before breaking out of the loops to plug the leak.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate SID in parent security descriptor during ACL inheritance Introduce smb_validate_ntsd_sid() helper to safely validate Owner SID and Group SID inside the NT Security Descriptor (smb_ntsd) retrieved from the parent directory.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: capture fast-RX rate before mesh reuses skb->cb ieee80211_invoke_fast_rx() reads RX status through IEEE80211_SKB_RXCB(skb), which aliases the same skb->cb storage that ieee80211_rx_mesh_data() reuses as IEEE80211_TX_INFO. In the unicast forward path, mesh_data does: info = IEEE80211_SKB_CB(fwd_skb); memset(info, 0, sizeof(*info)); on the same skb the caller still names via rx->skb, then either queues the skb for TX (success) or kfree_skb()'s it (no-route) before returning RX_QUEUED. The caller's RX_QUEUED arm then calls sta_stats_encode_rate(status) on memory that is either zeroed (success path) or freed (no-route path). The latter is KASAN slab-use-after-free in ieee80211_prepare_and_rx_handle. Fix by encoding the rate from status before invoking ieee80211_rx_mesh_data(), so the RX_QUEUED arm consumes a value captured while status was still backed by valid memory.

In the Linux kernel, the following vulnerability has been resolved: erofs: fix metabuf leak in inode xattr initialization commit bb88e8da0025 ("erofs: use meta buffers for xattr operations") converted xattr operations to use on-stack erofs_buf instances. erofs_init_inode_xattrs() uses such a metabuf while reading the inline xattr header and shared xattr id array. Some error paths after erofs_read_metabuf() leave through out_unlock without dropping the metabuf, so the folio reference can leak. Consolidate the cleanup at out_unlock. erofs_put_metabuf() is a no-op if no folio has been acquired, and this keeps all paths after taking EROFS_I_BL_XATTR_BIT covered by a single cleanup site.

In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: fix dma_buffer leak on bus acquire failure wilc_wlan_firmware_download() allocates dma_buffer with kmalloc() at the top of the function and uses a 'fail:' label to free it via kfree(dma_buffer) on error. All later error paths correctly use 'goto fail' to route through this cleanup. However, the early failure path after the first acquire_bus() call uses a bare 'return ret;', which leaks dma_buffer whenever the bus acquire fails. Replace the early return with goto fail so the existing cleanup path runs. Found via a custom Coccinelle semantic patch hunting for kmalloc'd locals leaked on early-return error paths in driver firmware-download code.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btmtk: fix urb->setup_packet leak in error paths The setup_packet of control urb is not freed if usb_submit_urb fails or the submitted urb is killed. Add free in these two paths.

In the Linux kernel, the following vulnerability has been resolved: platform/x86: uniwill-laptop: Do not enable the charging limit even when forced It seems that on some older models (~2020) the battery charging limit can permanently damage the battery. Prevent users from enabling this feature thru the "force" module parameter to avoid causing permanent hardware damage on such devices.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: close durable scavenger races against m_fp_list lookups ksmbd_durable_scavenger() has two related races against any walker that iterates f_ci->m_fp_list, including ksmbd_lookup_fd_inode() (used by ksmbd_vfs_rename) and the share-mode checks in fs/smb/server/smb_common.c. (1) fp->node list-head reuse. Durable-preserved handles can remain linked on f_ci->m_fp_list after session teardown so share-mode checks still see them while the handle is reconnectable. The scavenger collected expired handles by adding fp->node to a local scavenger_list after removing them from the global durable idr. Because fp->node is the same list_head used by m_fp_list, list_add(&fp->node, &scavenger_list) overwrites the m_fp_list links and corrupts both lists. CONFIG_DEBUG_LIST can report this on the share-mode walk path. (2) Refcount race against m_fp_list walkers. The scavenger qualifies an expired durable handle with atomic_read(&fp->refcount) > 1 and fp->conn under global_ft.lock, removes fp from global_ft, then drops global_ft.lock before unlinking fp from m_fp_list and freeing it. During that gap fp is still linked on m_fp_list with f_state == FP_INITED. ksmbd_lookup_fd_inode() under m_lock read calls ksmbd_fp_get() (atomic_inc_not_zero on refcount that is still 1) and takes a live reference; the scavenger then unlinks and frees fp while the holder owns a reference, leading to UAF on the holder's subsequent ksmbd_fd_put() and on any field reads performed by a concurrent share-mode walker that iterates m_fp_list without taking ksmbd_fp_get() (smb_check_perm_dleases-like paths). Fix both: * Stop reusing fp->node as a scavenger-private list node. Remove one expired handle from global_ft under global_ft.lock, take an explicit transient reference, drop the lock, unlink fp->node from m_fp_list under f_ci->m_lock, then drop both the durable lifetime and transient references with atomic_sub_and_test(2, &fp->refcount). If the scavenger is the last putter the close runs there; otherwise an in-flight holder that already raced through the m_fp_list lookup owns the final close via its ksmbd_fd_put() path. The one-at-a-time disposal can rescan the durable idr when multiple handles expire in the same pass, but durable scavenging is a background expiration path and the final full scan recomputes min_timeout before the next wait. * Clear fp->persistent_id inside __ksmbd_remove_durable_fd() right after idr_remove(), so a delayed final close from a holder that snatched fp does not re-issue idr_remove() on a persistent id that idr_alloc_cyclic() in ksmbd_open_durable_fd() may have already handed out to a brand-new durable handle. * Bypass the per-conn open_files_count decrement in __put_fd_final() when fp is detached from any session table (fp->conn cleared by session_fd_check() at durable preserve -- paired with the volatile_id clear at unpublish, so checking fp->conn alone is sufficient). The walker that owns the final close runs from an unrelated work->conn whose stats.open_files_count never tracked this durable fp; without this guard the holder would underflow that unrelated counter. The two races are folded into one patch because patch (1) alone cleans up the corrupted list but leaves a deterministic UAF window for m_fp_list walkers that the transient-reference and persistent_id discipline in (2) close; bisecting onto an intermediate state would land on a UAF that pre-patch chaos merely made less reproducible. Validation: * CONFIG_DEBUG_LIST coverage for the list_head reuse path. * KASAN-enabled direct SMB2 durable-handle coverage that exercised ksmbd_durable_scavenger() and non-NULL ksmbd_lookup_fd_inode() returns while durable handles expired under concurrent rename lookups, with no KASAN, UAF, list-corruption, ODEBUG, or WARNING reports. ---truncated---

This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix potential for tearing in ->remote_i_size and ->zero_point Fix potential tearing in using ->remote_i_size and ->zero_point by copying i_size_read() and i_size_write() and using the same seqcount as for i_size. We need to make sure that netfslib and the filesystems that use it always hold i_lock whilst updating any of the sizes to prevent i_size_seqcount from getting corrupted.

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix zeropoint update where i_size > remote_i_size Fix the update of the zero point[*] by netfs_release_folio() when there is uncommitted data in the pagecache beyond the folio being released but the on-server EOF is in this folio (ie. i_size > remote_i_size). The update needs to limit zero_point to remote_i_size, not i_size as i_size is a local phenomenon reflecting updates made locally to the pagecache, not stuff written to the server. remote_i_size tracks the server's i_size. [*] The zero point is the file position from which we can assume that the server will just return zeros, so we can avoid generating reads. Note that netfs_invalidate_folio() probably doesn't need fixing as zero_point should be updated by setattr after truncation or fallocate. Found with: fsx -q -N 1000000 -p 10000 -o 128000 -l 600000 \ /xfstest.test/junk --replay-ops=junk.fsxops using the following as junk.fsxops: truncate 0x0 0x1bbae 0x82864 write 0x3ef2e 0xf9c8 0x1bbae write 0x67e05 0xcb5a 0x4e8f6 mapread 0x57781 0x85b6 0x7495f copy_range 0x5d3d 0x10329 0x54fac 0x7495f write 0x64710 0x1c2b 0x7495f mapread 0x64000 0x1000 0x7495f on cifs with the default cache option. It shows read-gaps on folio 0x64 failing with a short read (ie. it hits EOF) if the FMODE_READ check is commented out in netfs_perform_write(): if (//(file->f_mode & FMODE_READ) || netfs_is_cache_enabled(ctx)) { and no fscache. This was initially found with the generic/522 xfstest.

In the Linux kernel, the following vulnerability has been resolved: iommu: Handle unmap error when iommu_debug is enabled Sashiko noticed a latent bug where the map error flow called iommu_unmap() which calls iommu_debug_unmap_begin()/iommu_debug_unmap_end() however since this is an error path the map flow never actually established the original iommu_debug_map() it will malfunction. Lift the unmap error handling into iommu_map_nosync() and reorder it so the trace_map()/iommu_debug_map() records the partial mapping and then immediately unmaps it. This avoid creating the unbalanced tracking and provides saner tracing instead of a unmap unmatched to any map.

In the Linux kernel, the following vulnerability has been resolved: iommupt: Check for missing PAGE_SIZE in the pgsize_bitmap Sashiko pointed out that the driver could drop PAGE_SIZE from the pgsize_bitmap. That is technically allowed but nothing does it, and such an iommu_domain would not be used with the DMA API today. Still, it is against the design and it is trivial to fix up. Lift the PT_WARN_ON to the if branch and just skip the fast path.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_inner: release local_lock before re-enabling softirqs Quoting sashiko: In the error path, local_bh_enable() is called before local_unlock_nested_bh().

In the Linux kernel, the following vulnerability has been resolved: dma-mapping: move dma_map_resource() sanity check into debug code dma_map_resource() uses pfn_valid() to ensure the range is not RAM. However, pfn_valid() only checks for availability of the memory map for a PFN but it does not ensure that the PFN is actually backed by RAM. On ARM64 with SPARSEMEM (128MB section granularity), MMIO addresses that share a section with RAM will falsely trigger the WARN_ON_ONCE and cause dma_map_resource() to return DMA_MAPPING_ERROR. This causes a WARNING on Raspberry Pi 4 during spi_bcm2835 probe because the SPI FIFO register (0xfe204004) falls in the same sparsemem section as the end of RAM (0xf8000000-0xfbffffff), both in section 31 (0xf8000000-0xffffffff). Move the sanity check from dma_map_resource() into debug_dma_map_phys() and replace the unreliable pfn_valid() with pfn_valid() && !PageReserved(), which correctly identifies actual usable RAM without false positives for MMIO regions that happen to have struct pages. Since dma_map_resource() is dma_map_phys(DMA_ATTR_MMIO), the check applies equally to both APIs. Any non-reserved page represents kernel memory to a sufficient degree that using DMA_ATTR_MMIO on it is almost certainly wrong and risks breaking coherency on non-coherent platforms. ZONE_DEVICE pages used for PCI P2P DMA (MEMORY_DEVICE_PCI_P2PDMA) have PageReserved set, so they will not trigger a false positive. The check no longer blocks the mapping and uses err_printk() to integrate with dma-debug filtering.

In the Linux kernel, the following vulnerability has been resolved: pds_core: fix error handling in pdsc_devcmd_wait Fix two cases where pdsc_devcmd_wait() returns stale success from the completion register instead of an error: 1. FW crash: If firmware stops running, the wait loop breaks early with running=false. The condition "if ((!done || timeout) && running)" is false, so error handling is bypassed and stale status is returned. Check !running first and return -ENXIO. 2. Timeout: If a command times out, err is set to -ETIMEDOUT but then overwritten by pdsc_err_to_errno(status) which reads stale status. Return -ETIMEDOUT immediately after cleaning up. Both errors now propagate to pdsc_devcmd_locked() which queues health_work for recovery.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/adm1266) bounce blackbox records through a protocol-sized buffer adm1266_pmbus_block_xfer() copies the device-supplied block payload into the caller-provided buffer using the device-supplied length: memcpy(data_r, &msgs[1].buf[1], msgs[1].buf[0]); The helper does not know how large data_r is and trusts the device to return at most one record's worth of bytes. adm1266_nvmem_read_blackbox() violates that contract: it advances read_buff inside data->dev_mem in ADM1266_BLACKBOX_SIZE (64-byte) strides while the helper is willing to write up to ADM1266_PMBUS_BLOCK_MAX (255) bytes. A device that returns more than 64 bytes on the trailing record (read_buff offset 1984 in the 2048-byte dev_mem allocation) overflows dev_mem by up to 191 bytes before the post-call if (ret != ADM1266_BLACKBOX_SIZE) return -EIO; can reject the response. Contain the fix in the caller without changing the helper signature: read each record into a 255-byte local bounce buffer that matches the helper's maximum output, validate the returned length, and only then copy exactly ADM1266_BLACKBOX_SIZE bytes into the dev_mem slot.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix driver-set TX rates on old devices On old devices such as 7265D, rates are still encoded in version 1 format, which doesn't use the CCK/OFDM rate index (0-3/0-7) but rather their PLCP value (e.g. 10 for 1 Mbps CCK rate.) While introducing v3 rates, I changed the driver from internally handling v1 rates and converting to v2, to internally handling v3 and converting to v1 or v2 according to the firmware. I accordingly changed the code in iwl_mvm_mac80211_idx_to_hwrate() to no longer have different values for different APIs. This was correct. However, I later reverted this part of the change, because it was reported that I had broken beacon rates, causing a FW assert/crash. This caused TX_CMD rates to be set incorrectly, potentially causing a warning when reported back from the device as having been used. Fix this (hopefully correctly now) by handling beacon rates in the TX_CMD that's embedded in the beacon template command separately. Restore iwl_mvm_mac80211_idx_to_hwrate() to return only the rate index, not PLCP value, fixing the real TX_CMD.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mld: stop TX during firmware restart When iwlwifi firmware crashes (e.g., NMI_INTERRUPT_UNKNOWN on Intel BE201/Wi-Fi 7), iwl_mld_nic_error() sets mld->fw_status.in_hw_restart to true. However, iwl_mld_tx_from_txq() does not check this flag before dequeuing frames from mac80211 and pushing them to the transport layer. Since the firmware is dead, iwl_trans_tx() returns -EIO for each frame, which then gets freed immediately. Under high-throughput conditions (e.g., Tailscale UDP traffic or active SSH sessions), this creates a tight dequeue-send-fail-free loop that wastes CPU cycles and generates rapid skb allocation churn, leading to memory pressure from slab fragmentation. The RX path already has this guard (iwl_mld_rx_mpdu checks in_hw_restart at rx.c:1906), and so does the TXQ allocation worker (iwl_mld_add_txqs_wk at tx.c:156). Add the same guard to iwl_mld_tx_from_txq() to stop all TX during firmware restart. Frames left in mac80211's TXQs are naturally drained after restart completes, when queue reallocation triggers iwl_mld_tx_from_txq() via iwl_mld_add_txq_list(), or when new upper-layer traffic invokes wake_tx_queue. Tested on ASUS Zenbook 14 UX3405CA with Intel BE201 (Wi-Fi 7) on kernel 6.19.5 where the firmware crashes approximately every 10-15 minutes under Tailscale traffic.

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: advance loop vars in cfg80211_merge_profile() cfg80211_merge_profile() reassembles a Multi-BSSID non-transmitted BSS profile that has been split across multiple consecutive MBSSID elements. Its while-loop calls cfg80211_get_profile_continuation(ie, ielen, mbssid_elem, sub_elem) but never advances mbssid_elem or sub_elem inside the body. Each iteration therefore searches for a continuation that follows the same fixed pair; the helper returns the same next_mbssid; and the same next_sub bytes are memcpy()'d into merged_ie at a growing offset until the buffer fills. Advance both mbssid_elem and sub_elem to the just-consumed continuation so the next call to cfg80211_get_profile_continuation() searches for a further continuation beyond it (or returns NULL when none exists). A specially-crafted malicious beacon can take advantage of this bug to cause the kernel to spend an excessive amount of time in cfg80211_merge_profile (up to as much as 2ms per beacon received), which could theoretically be abused in some way.

In the Linux kernel, the following vulnerability has been resolved: tracing: Do not call map->ops->elt_free() if elt_alloc() fails In paths where tracing_map_elt_alloc() failed to allocate objects, the map->ops->elt_alloc() call was never successful. In this case, map->ops->elt_free() should not be called.