CVE Feed

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix buffer overflow during vBIOS update Clamp the buffer postion to write by setting the bin attribute to the maximum buffer size so that VFS layer will block the out-of-bounds accessing.

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix races in cifsd thread creation The cifsd demultiplex thread can run and access tcp_ses before the parent thread has finished populating tcp_ses, which the worker thread accesses locklessly. Also, the kthread_run macro may start the thread before returning the thread pointer. Because the pointer is part of the structure that the thread can access, if the kernel is preempted after the thread is spawned, but before the thread pointer is populated and the thread attempts to exit, it will sleep, waiting for a SIGKILL signal. Fix this by moving creation of the thread to after all of tcp_ses'es fields are populated, and spawning the thread last, using a split kthread_create/wake_up_process logic.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Let driver decide buffer size at AMDKFD_IOC_GET_DMABUF_INFO ioctl amdkfd driver needs allocate buffer to return bo metadata to user space. The buffer size is controlled by user currently. It is a potential security issue that hostile value (e.g. 2 GiB) lets any render-group user trigger order-MAX allocation/OOM in kernel context. This patch first finds bo metadata size. If the size is smaller than user provided value drive can safely allocate buffer in kernel space and copy to user space buffer. If not, driver will let user know, not allocate and copy. User will redo with new buffer in user space. This patch lets driver decide buffer allocation size to avoid potential hostile size from user space. (cherry picked from commit f54ce9e8cbd3abe0eda3a285f54dc4f572fe589a)

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: ibss: wait for in-flight TX on disconnect While leaving an IBSS in ieee80211_ibss_disconnect() mac80211 flushes stations, turns the carrier off and immediately tells the driver to leave as well. While there may be synchronize_net() in station flush and in this code later, packets can still be transmitted due to cross-CPU race conditions after carrier off is set. Therefore, it's possible for a race to happen where a TX to the driver occurs while or after telling it to leave the IBSS. This can be confusing to drivers, and in the case of iwlwifi leads to an attempt to use invalid queues. Move netif_carrier_off() to occur before sta_info_flush() during IBSS disconnect, and add synchronize_net() if flushing didn't, so that the synchronize_net() always happens between turning the carrier off and telling the driver, avoiding this race.

In the Linux kernel, the following vulnerability has been resolved: smb/client: flush dirty data before punching a hole Punching a hole after a large buffered write may leave the range reported as data. Reproduce it with: xfs_io -f \ -c "pwrite -b 3m -S 0x61 0 3m" \ -c "fpunch 1m 1m" \ -c "seek -h 0" \ -c "seek -d 1m" \ /mnt/test/repro Punching 1 MiB at offset 1 MiB should produce: 0 1 MiB 2 MiB 3 MiB | DATA | HOLE | DATA | EOF Instead, the entire file is reported as data. SEEK_HOLE(0) returns EOF, and SEEK_DATA(1M) returns 1M. This happens because a dirty folio spanning the punched range can be written back after the punch and refill the hole. Fix this by flushing and waiting for dirty data in the punched range before invalidating the page cache and issuing FSCTL_SET_ZERO_DATA. The xfstests generic/539 pass against Samba/ksmbd with this change.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: validate TX_CMD response layout TX_CMD parsing uses frame_count to walk status entries and then read the trailing SCD SSN. Make the minimum-length check follow that exact runtime layout calculation before parsing the payload. For new TX API, reject TX_CMD responses with frame_count != 1 and warn/return in the aggregation handler to document that aggregated accounting is expected via BA notifications.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix maximum allowed access checks The DACL permission check looks for an ACE matching the current user and falls back to the Everyone ACE. It does not consider an Authenticated Users ACE, even though an authenticated session is a member of that well-known group. As a result, opening a file whose access is granted through S-1-5-11 can incorrectly fail with STATUS_ACCESS_DENIED. Treat an Authenticated Users ACE as a fallback entry alongside Everyone. The maximal access calculation also combines access masks from every ACE, regardless of whether its SID applies to the current user. This can grant rights belonging to an unrelated principal. Process only ACEs applying to the user, Everyone, or Authenticated Users, and accumulate allowed and denied masks in ACL order. Preserve explicitly requested access bits so they are validated against the resulting maximal mask. When ACCESS_SYSTEM_SECURITY is denied, report STATUS_PRIVILEGE_NOT_HELD instead of the generic STATUS_ACCESS_DENIED. Access to the system ACL requires a security privilege that ksmbd does not grant. For regular files, include FILE_EXECUTE in maximal access when the client requested GENERIC_EXECUTE and the DACL grants the complete file-read set. Keep a direct FILE_EXECUTE request subject to the explicit DACL bit. This matches the POSIX file ACL mapping without broadening specific execute requests. Do not replace rights from an applicable NT ACE with a POSIX ACL entry. The POSIX ACL is only a fallback when no user, Everyone, or Authenticated Users ACE applies; otherwise it can incorrectly broaden the stored DACL. This fixes smb2.maximum_allowed.maximum_allowed.

In the Linux kernel, the following vulnerability has been resolved: ext4: fix circular lock dependency in ext4_ext_migrate Move iput(tmp_inode) after ext4_writepages_up_write() to avoid a circular lock dependency between s_writepages_rwsem and sb_internal (freeze protection). The deadlock scenario: CPU0 (EXT4_IOC_MIGRATE) CPU1 (orphan cleanup during mount) ---- ---- ext4_ext_migrate() ext4_writepages_down_write() s_writepages_rwsem (write) ext4_evict_inode() sb_start_intwrite() [sb_internal] ... ext4_writepages() s_writepages_rwsem (read) [BLOCKED] iput(tmp_inode) ext4_evict_inode() sb_start_intwrite() [BLOCKED] The tmp_inode is a temporary inode with nlink=0 created solely for building the extent tree. Its eviction does not require s_writepages_rwsem protection, so deferring iput() until after releasing the rwsem is safe.

In the Linux kernel, the following vulnerability has been resolved: svcrdma: Reject Write/Reply chunks with segcount 0 A peer can send a Write or Reply chunk whose segcount field is zero. xdr_check_write_chunk() only rejects segcount > rc_maxpages, so zero passes the range check, and xdr_inline_decode(stream, 0) returns the current (non-NULL) cursor without advancing. The function returns true and pcl_alloc_write() then links a struct svc_rdma_chunk with ch_segcount == 0 onto rc_write_pcl or rc_reply_pcl. An earlier patch in this series made pcl_for_each_segment() safe for ch_segcount == 0, so this no longer drives the memory walk it used to. Rejecting the malformed frame at the decode boundary is still worthwhile as defense in depth: it keeps degenerate zero-segment chunks off the parsed chunk lists entirely, so any future consumer that walks ch_segments directly cannot observe one, and it makes the zero-floor easy to backport to trees where the macro change is more intrusive. RFC 8166 has no meaning for a Write/Reply chunk that describes no remote buffer, so no legitimate client is affected. xdr_check_reply_chunk() funnels Reply chunks through xdr_check_write_chunk() and inherits the same rejection. pcl_alloc_write() also links each chunk onto the parsed chunk list before filling its segment array. If a future change weakens the segcount-0 rejection, an incomplete chunk is visible to consumers during the fill loop. Reorder so that list_add_tail() follows the segment fill loop, ensuring only fully-populated chunks appear on the list.

In the Linux kernel, the following vulnerability has been resolved: PCI/sysfs: Add CAP_SYS_ADMIN check to __resource_resize_store() Currently, the __resource_resize_store() allows writing to the resourceN_resize sysfs attribute to change a BAR's size without checking for capabilities, currently relying only on the file access check. Resizing a BAR modifies PCI device configuration and can disrupt active drivers. After the upcoming conversion to static attributes, it will also trigger resource file updates via sysfs_update_groups(). Add a CAP_SYS_ADMIN check to prevent unprivileged users from performing BAR resize operations.

In the Linux kernel, the following vulnerability has been resolved: genirq/proc: Size interrupt directory names for 10-digit interrupt numbers /proc/irq/<n>/ directory names are built in `char name[10]` buffers with `sprintf(name, "%u", irq)`. Ten-digit IRQ numbers already need 11 bytes including the trailing NUL, and current sparse-IRQ configurations allow interrupt numbers in that range. Size the temporary name buffer for the current decimal form and switch to bounded formatting when creating or removing the proc entry.

In the Linux kernel, the following vulnerability has been resolved: driver core: Avoid warning when removing a device while its supplier is unbinding During driver removal, the following warning can appear: WARNING: CPU: 1 PID: 139 at drivers/base/core.c:1497 __device_links_no_driver+0xcc/0xfc ... Call trace: __device_links_no_driver+0xcc/0xfc (P) device_links_driver_cleanup+0xa8/0xf0 device_release_driver_internal+0x208/0x23c device_links_unbind_consumers+0xe0/0x108 device_release_driver_internal+0xec/0x23c device_links_unbind_consumers+0xe0/0x108 device_release_driver_internal+0xec/0x23c device_links_unbind_consumers+0xe0/0x108 device_release_driver_internal+0xec/0x23c driver_detach+0xa0/0x12c bus_remove_driver+0x6c/0xbc driver_unregister+0x30/0x60 pci_unregister_driver+0x20/0x9c lan966x_pci_driver_exit+0x18/0xa90 [lan966x_pci] This warning is triggered when a consumer is removed because the links status of its supplier is not DL_DEV_DRIVER_BOUND and the link flag DL_FLAG_SYNC_STATE_ONLY is not set. The topology in terms of consumers/suppliers used was the following (consumer ---> supplier): i2c -----------> OIC ----> PCI device | ^ | | +---> pinctrl ---+ When the PCI device is removed, the OIC (interrupt controller) has to be removed. In order to remove the OIC, pinctrl and i2c need to be removed and to remove pinctrl, i2c need to be removed. The removal order is: 1) i2c 2) pinctrl 3) OIC 4) PCI device In details, the removal sequence is the following (with 0000:01:00.0 the PCI device): driver_detach: call device_release_driver_internal(0000:01:00.0)... device_links_busy(0000:01:00.0): links->status = DL_DEV_UNBINDING device_links_unbind_consumers(0000:01:00.0): 0000:01:00.0--oic link->status = DL_STATE_SUPPLIER_UNBIND call device_release_driver_internal(oic)... device_links_busy(oic): links->status = DL_DEV_UNBINDING device_links_unbind_consumers(oic): oic--pinctrl link->status = DL_STATE_SUPPLIER_UNBIND call device_release_driver_internal(pinctrl)... device_links_busy(pinctrl): links->status = DL_DEV_UNBINDING device_links_unbind_consumers(pinctrl): pinctrl--i2c link->status = DL_STATE_SUPPLIER_UNBIND call device_release_driver_internal(i2c)... device_links_busy(i2c): links->status = DL_DEV_UNBINDING __device_links_no_driver(i2c)... pinctrl--i2c link->status is DL_STATE_SUPPLIER_UNBIND oic--i2c link->status is DL_STATE_ACTIVE oic--i2c link->supplier->links.status is DL_DEV_UNBINDING The warning is triggered by the i2c removal because the OIC (supplier) links status is not DL_DEV_DRIVER_BOUND. Its links status is indeed set to DL_DEV_UNBINDING. It is perfectly legit to have the links status set to DL_DEV_UNBINDING in that case. Indeed we had started to unbind the OIC which triggered the consumer unbinding and didn't finish yet when the i2c is unbound. Avoid the warning when the supplier links status is set to DL_DEV_UNBINDING and thus support this removal sequence without any warnings.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't call ieee80211_handle_reconfig_failure when not needed In case reconfiguration of NAN fails, we call ieee80211_handle_reconfig_failure, that marks all interfaces as not in the driver. Then, at the error path of the reconfig, cfg80211_shutdown_all_interfaces is called to destroy all the interfaces. If we have any other interface but the NAN one, for example a BSS station, then when its state (links, stations) will be removed, we won't tell the driver about this, because we will think that the interfaces are not in the driver, and then drivers might remain with dangling pointers to objects like stations and links (at least for iwlwifi this is the case). ieee80211_handle_reconfig_failure is meant to be called after we cleaned up the state in the driver, there is no reason to call it for NAN reconfiguration failure. Fix the code to just warn in such a case, as we do in other error paths in reconfig where it is too complicated to rewind.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: fix P2P-Device binding handling Our binding handling for P2P-Device can run into the following scenario, as observed by our testing: - a station interface is connected on some channel - the P2P-Device does a remain-on-channel (ROC) on that channel - the ROC ends, and the P2P-Device is removed from the binding, but the phy_ctxt pointer is left around as a PHY cache so we don't need to recalibrate to the channel again and again in case it's not shared - a binding update by the station interface, even a removal, will re-add the P2P-Device to the binding - the P2P-Device is removed, which removes the PHY context, but it's still in the binding so the firmware crashes Since the P2P device is removed from the binding and only re- added by unrelated code, but we want to keep the phy_ctxt around as a cache for future ROC usage, fix it by adding a boolean that indicates whether or not the P2P-Device should be added to the binding, and handle that in the binding iterator. That way, the station interface cannot re-add the P2P-Device to the binding when that isn't active.

In the Linux kernel, the following vulnerability has been resolved: exfat: fix handling of damaged volume in exfat_create_upcase_table() When the size of the upcase table is set to zero in the dentry for any reason(e.g. corrupted media or misbehaving device), an integer overflow causes the module to loop indefinitely. If the size of the upcase table is read zero, do not attempt to load the table. Instead, fallback to loading the default upcase table. If the size of the upcase table is zero or no upcase table is found, raise exfat_fs_error() to mark the volume read-only.

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: pcie: null RX pointers after free When iwl_pcie_tx_init() fails after RX init, nic init unwinds via iwl_pcie_rx_free(). The freed RX members stayed non-NULL on the live transport object, so later teardown or retry could touch stale RX state. Set rx_pool, global_table, rxq, and alloc_page to NULL after free to make repeated cleanup and retry paths safe.

In the Linux kernel, the following vulnerability has been resolved: remoteproc: qcom_wcnss: Fix handling the lack of PD regulators in v3 The changes introduced to handle single power domain platforms have swapped the info pointer increment from num_pd_vregs to num_pds, which would shift the info pointer past the end of the array for pronto-v3, which does not list power domain regulators in vregs. This showed up as a difference between GCC- and LLVM-compiled kernels on SDM632 devices, where only with LLVM one would get the "regulator request with no identifier" error, because the out-of-bounds memory ended up being zeroed. Fix by skipping the increment when there are more power domains than regulators.

In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel/pt: Fix stop/start with no update If pt_event_stop() is called without PERF_EF_UPDATE flag, then perf_aux_output_end() is not called. A subsequent call to pt_event_start() will call perf_aux_output_begin() again which violates the rule against nesting and triggers a WARNING in perf_aux_output_begin(). Originally, pt_event_stop() was never called without PERF_EF_UPDATE, because the only code paths to do so are from event overflow, and Intel PT does not do that. However the introduction of group throttling by commit 9734e25fbf5ae ("perf: Fix the throttle logic for a group") meant that an Intel PT event could be throttled if it was part of a group. Throttling calls PMU ->stop() / ->start() callbacks without flags. An example is when AUX area sampling is used. The following commands hit the issue: echo 10000 > /proc/sys/kernel/perf_event_max_sample_rate perf record -F32000 --aux-sample -e '{intel_pt//u,cycles:u}' \ -- bash -c 'for i in `seq 1 100000` ; do true ; done' Use PERF_HES_UPTODATE to track whether perf_aux_output_begin() and perf_aux_output_end() are balanced. A cleared PERF_HES_UPTODATE bit indicates that an AUX output context is still open. Amend pt_event_start() / pt_event_stop() accordingly so that begin/end stay balanced: - In non-snapshot mode, stop() always closes the buffer (the buffer may have run out of space, and that accounting is done by the update), so a following start() opens a fresh one as before. - In snapshot/overwrite mode, stop() without PERF_EF_UPDATE leaves the buffer open so that pt_event_snapshot_aux() can still copy from it, and start() then only re-enables tracing instead of calling perf_aux_output_begin() again. Note that pt_event_del() calls pt_event_stop() with PERF_EF_UPDATE flag set (as is required by the documentation), so a final call to perf_aux_output_end() is assured.

In the Linux kernel, the following vulnerability has been resolved: phy: fsl-imx8mq-usb: fix typec switch leak on probe error path If probe fails after imx95_usb_phy_get_tca() succeeds, the typec switch leaks because the only cleanup path was in .remove(), which never runs on probe failure. Use devm_add_action_or_reset() so the switch is cleaned up on both probe failure and driver removal. The imx95_usb_phy_put_tca() is no longer needed, it will be removed in .remove() too.

ZBar commit 2ea2ca58 contains an undefined-behavior vulnerability in the Code 128 decode6() function. When processing specially crafted Code 128 input, decode_e() can return -1 for an invalid edge pattern, and decode6() subsequently left-shifts this negative signed value while constructing the edge signature. The operation invokes undefined behavior and can terminate trap-mode UBSan builds with SIGILL, resulting in denial of service.

NanoSVG commit 239e102ec contains an incorrect numeric conversion vulnerability in nsvg__pathArcTo() when parsing SVG arc commands. A specially crafted SVG document containing extreme arc radius values can cause intermediate arc calculations to produce a NaN delta angle. The function subsequently converts this NaN value to int without validating that it is finite and representable, resulting in undefined behavior and process termination, leading to denial of service.

Mini-XML 4.0.5 contains a memory leak vulnerability in mxml_load_data() during malformed XML parsing. Specially crafted XML input can cause text nodes allocated by mxmlNewText() to become unlinked before a parse error transfers control to the cleanup path. These orphaned nodes are not released, resulting in a persistent memory leak on each parsing attempt. Repeated attacker-controlled requests can cause cumulative memory exhaustion and denial of service.

libical 4.0.6 contains an incompatible function pointer in icalparameter_string_to_kind(). When parsing iCalendar data containing a parameterized property, the function passes icalparameter_compare_kind_map() to bsearch() through an incompatible comparator function pointer type. bsearch() invokes the callback through the mismatched type, resulting in undefined behavior and process termination, leading to denial of service.

An incorrect buffer size calculation vulnerability exists in tinyexpr commit 4a7456e in new_expr(). For arity-0 expression nodes, including constants, variables, and zero-argument functions, the function allocates less memory than sizeof(te_expr) but treats the returned allocation as a complete te_expr object. This results in undefined behavior and can cause deterministic process termination in UBSan-instrumented builds.

libvips 8.19.0 contains a memory access vulnerability when processing little-endian PFM images. If the PFM text header length is not a multiple of four bytes, the mmap-based loader can expose pixel data at an address that is not properly aligned for float access. vips_avg_scan() subsequently dereferences the buffer through a float pointer, resulting in undefined behavior and process termination on strict-alignment architectures or UBSan-instrumented builds, leading to denial of service.

An issue in geelen mcp-remote 0.1.18 through 0.1.38 allows a remote attacker to obtain sensitive information via the SSE transport eventSourceInit fetch wrapper " src/lib/utils.ts

In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_log: wait for rcu grace period before freeing pernet state sashiko reports: "nfnl_log_net_exit() calls nf_log_unset(), which clears the logger pointer without an RCU grace period. Immediately after, ops_free_list() frees the per-net state while concurrent packets might still be executing nf_log_packet() under rcu_read_lock()." Clear the pointer via .pre_exit to make sure rcu readers have completed before pernet storage is free'd. The change in nf_log_syslog.c is only done for consistency: it doesn't use pernet data.

A flaw was found in ModemManager. When parsing a Cell Broadcast Message, some 3GPP data-coding-scheme values (8-bit and reserved character sets) are not handled. The process hits a reachable assertion and aborts. An attacker who can deliver a crafted Cell Broadcast PDU over the radio network, or via a modem AT channel, can cause ModemManager to exit. Repeated aborts can exhaust systemd's default start limit and leave the service failed.

In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: reject beacons with bad HE operation The HE operation element not only needs to be longer than the fixed part, but also have an appropriate size for the variable part inside of it. Check this.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: Add NULL check for chip->edcca_th in rtw_fw_adaptivity_result() It was recently reported that rtw_fw_adaptivity_result() in fw.c dereferences rtwdev->chip->edcca_th without a NULL check. The issue is that devices with the 8821CE chip don't define edcca_th in their chip info. As a result, when rtw_fw_adaptivity_result() tries to dereference it, the kernel triggers an oops. Add a NULL check for edcca_th before dereferencing it in rtw_fw_adaptivity_result() in fw.c. Placing the check at the function entry avoids logging any garbage values. This change does not address the root cause for this behavior, but it prevents the NULL dereference and the resulting oops while a more permanent solution is developed. Tested on a 8822CE chip which defines edcca_th, so this issue is not present on it, but it still uses this driver and I can verify there are no regressions.

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Release request if tb_cfg_request() fails in __tb_xdomain_response() If tb_cfg_request() fails setting up the request (for example the control channel is shut down already) it returns an error without calling the callback. To avoid leaking that memory, call tb_cfg_request_put() if tb_cfg_request() fails.

In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Set tb->root_switch to NULL when domain is stopped Similarly what we do with the firmware connection manager. This makes tb_xdp_handle_request() return error to the remote host. However, we need to make sure we keep the uuid alive so that we can reply until the whole domain is released.

In the Linux kernel, the following vulnerability has been resolved: media: dm1105: fix missing error check for dma_alloc_coherent The return value of dm1105_dma_map(), which handles DMA memory allocation, is ignored in dm1105_hw_init(). If dma_alloc_coherent() fails, the driver will proceed using a NULL pointer for DMA transfers, leading to a kernel oops or invalid hardware access. Fix this by checking the return value and propagating -ENOMEM on failure.

In the Linux kernel, the following vulnerability has been resolved: crypto: ixp4xx - fix buffer chain unwind on allocation failure chainup_buffers() builds a linked list of buffer descriptors for a scatterlist. If dma_pool_alloc() fails while constructing the list, the current code sets buf to NULL and later dereferences it unconditionally at the end of the function: buf->next = NULL; buf->phys_next = 0; This can lead to a null-pointer dereference on allocation failure. If the failure happens after part of the descriptor chain has already been allocated and DMA-mapped, the partially constructed chain also needs to be released. Fix this by terminating the partially constructed chain on allocation failure and letting the callers unwind it via their existing cleanup paths. Also fix ablk_perform() to preserve the hook pointers before checking for failure, so partially built chains can be freed correctly.

In the Linux kernel, the following vulnerability has been resolved: mmc: davinci: avoid NULL deref of host->data in IRQ handler mmc_davinci_irq() returns early only when both host->cmd and host->data are NULL: if (host->cmd == NULL && host->data == NULL) { ... return IRQ_NONE; } So we may legitimately reach the rest of the handler with host->data == NULL (and therefore data == NULL). The DATDNE branch already guards against this with an explicit "if (data != NULL)" check, but the subsequent TOUTRD ("read data timeout") and CRCWR/CRCRD ("data CRC error") branches dereference data unconditionally: if (qstatus & MMCST0_TOUTRD) { data->error = -ETIMEDOUT; <-- NULL deref ... davinci_abort_data(host, data); } if (qstatus & (MMCST0_CRCWR | MMCST0_CRCRD)) { data->error = -EILSEQ; <-- NULL deref ... } If either bit is set in qstatus while host->data is NULL, the kernel will crash inside the IRQ handler. smatch flags this: drivers/mmc/host/davinci_mmc.c:933 mmc_davinci_irq() error: we previously assumed 'data' could be null (see line 914) Gate both branches on a non-NULL data, matching the existing pattern used by the DATDNE branch. No functional change for callers where data is non-NULL, which is the only case in which these branches did meaningful work before this change.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Check bounds for allocate_sdma_queue restore_sdma_id allocate_sdma_queue has an option where the sdma queue id can be specified (used by CRIU). We weren't bounds-checking that value. Confirm it's less than the maximum number of queues.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix OOB memory exposure in get_wave_state() The get_wave_state() function for v9 trusts cp_hqd_cntl_stack_size and cp_hqd_cntl_stack_offset values read directly from the MQD, which are written by GPU microcode and fully attacker-controlled on the CRIU-restore path (via AMDKFD_IOC_RESTORE_PROCESS with H3). this leads to an unbounded copy_to_user() that can leak adjacent GTT/kernel memory. If offset > size, integer underflow produces a ~4 GiB read length, if size is set to 1 MiB against a 4 KiB allocation, we leak 1 MiB of adjacent kernel memory (other queues' MQDs, ring buffers, KASLR pointers). Fix by clamping both cp_hqd_cntl_stack_size to the actual allocated buffer size (q->ctl_stack_size) and cp_hqd_cntl_stack_offset to the clamped size before performing arithmetic and copy_to_user(). This ensures we never read beyond the allocated kernel BO regardless of attacker-supplied MQD field values.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Check bounds on allocate_doorbell allocated_doorbell has an option to set the doorbell id to a specific value (used by CRIU). This value was not bounds checked. Check to confirm it's less than KFD_MAX_NUM_OF_QUEUES_PER_PROCESS.

In the Linux kernel, the following vulnerability has been resolved: net/rds: Don't sleep inside rds_ib_conn_path_shutdown New rds rdma self tests exposed a hang when tearing down the ib network configs. This is caused by the shutdown worker thread sleeping on the wait_event call, which blocks other work items in the queue. Fix this by changing wait_event to wait_event timeout, and looping until the wait check succeeds.

In the Linux kernel, the following vulnerability has been resolved: qnx4: handle set_blocksize failures qnx4 uses buffer_heads, which don't handle block size > PAGE_SIZE well. Without this, mounting will hit the BUG_ON(offset >= folio_size(folio)); in folio_set_bh on the first __bread_gfp call.

In the Linux kernel, the following vulnerability has been resolved: jfs: handle set_blocksize failures jfs uses buffer_heads, which don't handle block size > PAGE_SIZE well. Without this, mounting we will hit the BUG_ON(offset >= folio_size(folio)); in folio_set_bh on the first __bread_gfp call.

In the Linux kernel, the following vulnerability has been resolved: hpfs: handle set_blocksize failures hpfs uses buffer_heads, which don't handle block size > PAGE_SIZE well. Without this, mounting will hit the BUG_ON(offset >= folio_size(folio)); in folio_set_bh on the first __bread_gfp call.

In the Linux kernel, the following vulnerability has been resolved: usbip: vhci_hcd: fix NULL deref in status_show_vhci platform_get_drvdata() can return NULL if a VHCI host controller's probe failed (e.g. due to USB bus number exhaustion). status_show_vhci() checked for a NULL pdev but not for a NULL hcd returned by platform_get_drvdata(). Passing NULL to hcd_to_vhci_hcd() does not return NULL - it returns a pointer offset of 0x260, causing a NULL pointer dereference when that value is subsequently dereferenced. Add a NULL check on hcd before calling hcd_to_vhci_hcd(). Move status_show_not_ready() above status_show_vhci() to make it callable from the new error path without a forward declaration.

In the Linux kernel, the following vulnerability has been resolved: usb: core: hcd: fix possible deadlock in rh control transfers >From within the SCSI error handler memory allocations must not trigger IO. Handling errors in UAS and the storage driver may involve resetting a device. The thread doing the reset itself relies on VM magic. However, that is insufficient, as resetting a device involves resuming it. Resumption as well as resetting involves conrol transfers to the parent of the device to be reset. That may be a root hub. Hence usbcore must heed the flags passed to usb_submit_urb() processing control transfers to root hubs. The problem exist since the storage driver has been merged.

In the Linux kernel, the following vulnerability has been resolved: serial: 8250: fix possible ISR soft lockup There are rare cases in which the host gets stuck in the ISR because it is flooded with messages during the startup phase. The reason for the soft lockup in the ISR is the missing FIFO error IRQ (FIFOE) handling. Not handling it and reporting IRQ_HANDLED triggers the IRQ immediately again. Fix this by adding a check for the FIFOE status and clearing the FIFO if no data is ready (DR). This behavior was observed on an AM62L device which uses the OMAP 8250 driver. Fix it for all 8250 drivers, since the OMAP driver's special IRQ setup handling may trigger this behavior more frequently, but it is not ensured that other 8250 drivers aren't affected.

In the Linux kernel, the following vulnerability has been resolved: rds: filter RDS_INFO_* getsockopt by caller's netns The RDS_INFO_* family of getsockopt(2) options reads several file-scope global lists that are not per-netns: rds_sock_info / rds6_sock_info, rds_sock_inc_info / rds6_sock_inc_info -> rds_sock_list rds_tcp_tc_info / rds6_tcp_tc_info -> rds_tcp_tc_list rds_conn_info / rds6_conn_info, rds_conn_message_info_cmn (for the *_SEND_MESSAGES and *_RETRANS_MESSAGES variants), rds_for_each_conn_info (for RDS_INFO_IB_CONNECTIONS) -> rds_conn_hash[] The handlers do not filter by the caller's network namespace. rds_info_getsockopt() has no netns or capable() check, and rds_create() has no capable() check, so AF_RDS is reachable from an unprivileged user namespace. As a result, an unprivileged caller in a fresh user_ns plus netns can read the bound address and sock inode of every RDS socket on the host, the peer address of incoming messages on every RDS socket on the host, the peer address and TCP sequence numbers of every rds-tcp connection on the host, and the peer address and RDS sequence numbers of every RDS connection on the host. The rds-tcp transport is reachable from a non-initial netns (see rds_set_transport()), so a one-shot init_net gate at rds_info_getsockopt() would deny legitimate per-netns visibility to rds-tcp callers. Instead, filter at each handler by comparing the netns of the caller's socket to the netns of the list entry, or to rds_conn_net(conn) for connection paths. Only copy entries whose netns matches the caller. Counters (RDS_INFO_COUNTERS) are aggregate statistics and remain global. Reproducer (KASAN VM, rds and rds_tcp loaded): an AF_RDS socket binds 127.0.0.1:4242 in init_net as root. A child process enters a fresh user_ns plus netns and opens AF_RDS there, then calls getsockopt(SOL_RDS, RDS_INFO_SOCKETS). Before this change, the child sees the init_net socket. After this change, the child sees zero entries. Drop the rds_sock_count, rds_tcp_tc_count, and rds6_tcp_tc_count globals. v2 used them for the size precheck and lens->nr; v3 replaced the precheck with a per-ns count from a first pass over the list, so the globals have no remaining readers. The matching increments and decrements in rds_create()/rds_destroy_sock() and rds_tcp_set_callbacks()/rds_tcp_restore_callbacks() go away with them. Reported by the kernel test robot under clang W=1.

In the Linux kernel, the following vulnerability has been resolved: thermal/drivers/tegra/soctherma: Switch to devm cooling device registration Use devm_thermal_of_cooling_device_register() to simplify resource management and avoid manual cleanup in error paths. As a side effect this change has the benefit of solving an existing issue. Before, the function tegra_soctherm_remove() only called debugfs_remove_recursive() and never called thermal_cooling_device_unregister() for any of the cooling devices registered here. After the driver removal, the thermal framework's cdev list would still hold references to thermal_cooling_device objects whose devdata pointer (ts) pointed to memory already freed by the platform device's devm cleanup. With this change, the cooling device is unregistered when the driver is removed, thus fixing the issue above.

In the Linux kernel, the following vulnerability has been resolved: ipv6: addrconf: fix temp address generation after prefix deprecation When a router temporarily deprecates an IPv6 prefix (either by sending a Router Advertisement with Preferred Lifetime = 0 or by letting the lifetime expire) and later restores it, the kernel permanently loses its ability to generate temporary privacy addresses (RFC 8981) for that prefix. This happens because the address worker attempts to generate a replacement temporary address when the current one nears expiration. As the base prefix is deprecated already, the generation fails after marking the temporary address as already having spawned a replacement (ifp->regen_count++). When the router eventually restores the prefix, the temporary address becomes active again. However, once it naturally expires, the address worker sees this temporary address already tried to generate one and skips the regeneration. Fix the issue by resetting the regen_count check of the latest temp address generated for the prefix updated by the incoming RA.

In the Linux kernel, the following vulnerability has been resolved: ACPICA: Fix condition check in acpi_ps_parse_loop() Fix condition check for AML_ELSE_OP in acpi_ps_parse_loop() to prevent out-of-bounds access.

In the Linux kernel, the following vulnerability has been resolved: ACPICA: Fix use-after-free in acpi_ds_terminate_control_method() Fix use-after-free issue in acpi_ds_terminate_control_method() by clearing references to method locals and arguments.