CVE Feed

An issue in geelen mcp-remote 0.1.16 through 0.1.38 allows a remote attacker to execute arbitrary code via the open() functions

libfyaml 0.9.6 contains a stack exhaustion vulnerability in fy_atom_iter_format(). When processing a specially crafted YAML document containing a very large literal or folded block scalar, the function repeatedly grows an internal buffer using alloca() inside a loop. The allocated stack memory is not released until the function returns, causing cumulative stack growth that can exceed the process stack limit and result in SIGSEGV and denial of service.

MuJS e892c9fdb contains an incorrect numeric conversion vulnerability in jsR_isindex() in jsrun.c. A specially crafted JavaScript input containing an excessively large numeric array index can cause an out-of-range floating-point value to be converted to an integer without proper range validation. This results in undefined behavior and can cause process termination, leading to denial of service.

NanoSVG 239e102ec contains an incorrect numeric conversion vulnerability in nsvg__curveDivs() during SVG stroke rasterization. A specially crafted SVG document containing an extremely large stroke-width can cause floating-point rounding to produce a zero subdivision angle. The subsequent arc division yields infinity, which is converted to int without range validation, resulting in undefined behavior and process termination, leading to denial of service.

NanoSVG commit 239e102ec contains an incorrect numeric conversion vulnerability in the rasterizer's nsvg__addActive() function. A specially crafted SVG document containing sufficiently large geometry coordinates can cause fixed-point-scaled edge coordinates to exceed the range representable by int. The rasterizer subsequently converts these values to int without range validation, resulting in undefined behavior and possible process termination, leading to denial of service.

zserge jsmn commit 25647e6 is vulnerable to Buffer Overflow in example/jsondump.c dump().

libconfini 1.16.4 contains a heap out-of-bounds write condition involving the bundled load_ini_buffer.h utility and strip_ini_cache(). The bundled utility allocates exactly ini_length bytes, while strip_ini_cache() unconditionally writes a NUL terminator at ini_source[ini_length], requiring an additional writable byte. Applications using the bundled allocation pattern can trigger deterministic heap memory corruption when processing any non-empty INI input, resulting in denial of service.

QuickJS commit 04be24600 contains a heap out-of-bounds write condition in JS_ReadFunctionTag().

simdjson 4.6.1 contains a one-byte out-of-bounds read vulnerability in dom::parser::parse_unpadded(). A specially crafted truncated JSON document whose final structural token closes a nested array or object can cause json_iterator::walk_document() to access buf[len] after the input buffer has been exhausted. This results in a heap out-of-bounds read and may cause application termination, leading to denial of service.

minimp3 commit ea99364f contains an integer overflow vulnerability in mp3dec_skip_id3v1() when parsing the APEv2 tag-size field.

Bento4 1.6.0.0 contains an integer underflow vulnerability in the avcC and hvcC configuration atom parsers. A specially crafted MP4 file containing an atom with a declared size smaller than AP4_ATOM_HEADER_SIZE can cause AP4_AvccAtom::Create() or AP4_HvccAtom::Create() to underflow the payload-size calculation. The resulting oversized buffer operation can cause invalid or NULL pointers to be passed to the AP4_DataBuffer copy path, resulting in application termination and denial of service.

In the Linux kernel, the following vulnerability has been resolved: PCI/pwrctrl: tc9563: Fix parsing the integrated Ethernet MAC Endpoint node DSP3 has an integrated Ethernet MAC Endpoint which has its own set of config registers for configuring settings such as ASPM. The Endpoint device has two physical functions and those two functions share the same settings. Parse the Endpoint node under DSP3 instead of parsing both functions. The existing parsing logic also has one OOB issue as parsing both functions will result in accessing past the tc9563_pwrctrl->cfg array.

In the Linux kernel, the following vulnerability has been resolved: ext4: skip extra isize expansion during mount to prevent deadlock ext4_try_to_expand_extra_isize() is called from __ext4_mark_inode_dirty() while holding an active jbd2 handle. During mount (!SB_ACTIVE), the expand path may move xattrs to external blocks and release ea_inodes via iput(). When !SB_ACTIVE, iput() calls write_inode_now() which acquires s_writepages_rwsem, creating a circular lock dependency: s_writepages_rwsem --> jbd2_handle --> xattr_sem --> s_writepages_rwsem This can be triggered via: ext4_process_orphan() -> ext4_truncate() -> ext4_mark_inode_dirty() -> ext4_try_to_expand_extra_isize() or: ext4_evict_inode() -> ext4_mark_inode_dirty() -> ext4_try_to_expand_extra_isize() Skip expansion when !SB_ACTIVE. This is a minor loss of functionality (extra isize won't grow for these inodes during mount), which e2fsck can resolve later if needed.

In the Linux kernel, the following vulnerability has been resolved: phy: renesas: phy-rcar-gen3-usb2: Fix devm action registration for disabled VBUS regulator devm_regulator_get_exclusive() initialises the regulator with enable_count = 1, requiring the consumer to disable it before release. The devm disable action was previously only registered when the caller explicitly requested enable, so when the regulator was left in its initial enabled state without an explicit enable call, the cleanup path skipped decrementing enable_count, triggering a WARN_ON during regulator release on device removal. Fix this by always registering the devm disable action based on the actual enabled state via regulator_is_enabled(), regardless of whether the caller requested an explicit enable. This covers both the explicitly enabled case and the initial state set by devm_regulator_get_exclusive().

In the Linux kernel, the following vulnerability has been resolved: staging: octeon: add missing tasklet_kill in cvm_oct_tx_shutdown The TX cleanup tasklet can be scheduled by the watchdog IRQ handler to execute cvm_oct_tx_do_cleanup. There can be a pending tasklet in the queue which might run after the cvm_oct_remove() frees net_device structures, causing a use-after-free in cvm_oct_tx_do_cleanup() as it iterates cvm_oct_device[] which is an array of netdevice pointers. Add tasklet_kill() after free_irq() to ensure the tasklet is no longer scheduled or running before teardown proceeds.

In the Linux kernel, the following vulnerability has been resolved: greybus: audio: bound the topology section sizes against the fetched size gb_audio_gb_get_topology() fetches a topology blob of a module-supplied size, and gbaudio_tplg_parse_data() then walks it by adding the module-supplied size_dais, size_controls and size_widgets fields to form the control, widget and route section offsets. Those le32 sizes are never checked against the fetched blob, so a module reporting a small topology size but large section sizes makes the offsets point past the allocation, and parsing reads out of bounds. Reject a topology whose section sizes do not fit within the fetched size before it is parsed.

In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: mt8365-afe-pcm: fix possible NULL-pointer dereferences in mt8365_afe_suspend() mt8365_afe_suspend() allocates the register backup buffer with devm_kcalloc(), but does not check for allocation failure before using the returned pointer. This may lead to a NULL pointer dereference when accessing afe->reg_back_up[i]. Add the missing NULL check and return -ENOMEM on allocation failure after disabling the main clock. Also propagate the return value of mt8365_afe_suspend() in mt8365_afe_dev_runtime_suspend() so that the suspended state is not updated when suspend fails.

In the Linux kernel, the following vulnerability has been resolved: i3c: master: svc: Prevent IRQ storm from false SLVSTART on NPCM845 On NPCM845, when a target on the I3C bus gets stuck holding SDA low, the controller reports a false Master Request (MR) in-band interrupt event. The driver handles this by emitting a STOP condition to restore the bus. However, the hardware quirk SVC_I3C_QUIRK_FALSE_SLVSTART indicates that emitting a STOP condition may spuriously set the SLVSTART interrupt status bit. In the Master Request case, this creates a feedback loop: the STOP triggers a new SLVSTART event, the IRQ handler fires again, the controller still reports an MR type, another STOP is emitted, and the cycle repeats indefinitely, resulting in an IRQ storm that can lock up the CPU. Clear the SLVSTART status bit explicitly after emitting the STOP in the Master Request IBI handler when the SVC_I3C_QUIRK_FALSE_SLVSTART quirk is set. This breaks the feedback loop without affecting normal SLVSTART processing, which is already guarded in the top-level IRQ handler by checking that MSTATUS is in SLVREQ state.

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix null pointer dereference in devcoredump cleanup In xe_devcoredump_snapshot_free(), ss->gt may be NULL when the snapshot was never fully populated (e.g., when cleanup is triggered without a prior capture). Guard the xe_guc_capture_put_matched_nodes() call with IS_ERR_OR_NULL() to prevent a null dereference. In xe_devcoredump_free(), the deferred work is only queued when a coredump is captured, so guard cancel_work_sync() with a check on coredump->captured.

In the Linux kernel, the following vulnerability has been resolved: gfs2: fix quota init duplicate scan gfs2_quota_init() checks for duplicate quota_change IDs while holding qd_lock and the quota hash bucket bitlock. That path used gfs2_qd_search_bucket(), which takes a lockref reference via lockref_get_not_dead(). On PREEMPT_RT this may sleep, which is not allowed under the bucket bitlock, triggering "sleeping function called from invalid context". Use a no-ref bucket lookup in this path, then continue duplicate handling without taking a lockref there. Refactor gfs2_qd_search_bucket() to build on top of the no-ref helper so lookup traversal stays in one place. This patch fixes a bug reported by syzbot.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix SMI event cross-process information leak kfd_smi_ev_enabled() skips the suser privilege check when pid=0. PROCESS_START, PROCESS_END, and VMFAULT events are emitted with pid=0 while carrying another process's PID and command name, so any /dev/kfd user in the render group can monitor all GPU workloads. Pass the target process PID into kfd_smi_event_add() for these events so the existing per-client filter restricts delivery to the owning process or CAP_SYS_ADMIN subscribers.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Avoid DPMS-on for phantom stream [Why & How] Calling dc_update_planes_and_stream separately for stream and its phantom stream causes a NULL pointer dereference, since the phantom is destroyed on the first call. Skip the call for phantom streams.

In the Linux kernel, the following vulnerability has been resolved: nvme: validate FDP configuration descriptor sizes Validate descriptor sizes while walking the FDP configurations log so dsze == 0 or a descriptor past the log end cannot cause unbounded iteration or reads past the buffer.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: preserve non-DOS attribute bits in system.dos_attrib [BUG] A corrupted ntfs3 image can hit a NULL function pointer call in generic_perform_write() after toggling system.ntfs_attrib and then overwriting system.dos_attrib on the same file. BUG: kernel NULL pointer dereference, address: 0000000000000000 \#PF: supervisor instruction fetch in kernel mode \#PF: error_code(0x0010) - not-present page PGD bed5067 P4D bed5067 PUD 0 Oops: Oops: 0010 [#1] SMP KASAN NOPTI RIP: 0010:0x0 Code: Unable to access opcode bytes at 0xffffffffffffffd6. RSP: 0018:ffff88801025f988 EFLAGS: 00010246 Call Trace: generic_perform_write+0x409/0x8c0 mm/filemap.c:4255 __generic_file_write_iter+0x1bb/0x200 mm/filemap.c:4372 ntfs_file_write_iter+0xcd9/0x1c20 fs/ntfs3/file.c:1253 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x63b/0xf70 fs/read_write.c:686 ksys_write+0x133/0x250 fs/read_write.c:738 __do_sys_write fs/read_write.c:749 [inline] __se_sys_write fs/read_write.c:746 [inline] __x64_sys_write+0x77/0xc0 fs/read_write.c:746 ... [CAUSE] system.ntfs_attrib updates ATTR_DATA flags via ni_new_attr_flags() and switches i_mapping->a_ops to ntfs_aops_cmpr when FILE_ATTRIBUTE_COMPRESSED is set. system.dos_attrib then overwrites ni->std_fa from a one-byte DOS attribute value, clearing the compression bit without updating ATTR_DATA or the mapping operations. Old buffered writes use is_compressed(ni) to choose __generic_file_write_iter(). That leaves generic_perform_write() calling a NULL write_begin callback from ntfs_aops_cmpr. [FIX] Treat system.dos_attrib as a low-byte DOS attribute update and preserve the existing non-DOS attribute bits in ni->std_fa. This keeps compressed and sparse state consistent with ATTR_DATA and the mapping operations while keeping the existing DOS attribute semantics intact.

In the Linux kernel, the following vulnerability has been resolved: tty: serial: 8250: protect against NULL uart->port.dev in register serial8250_register_8250_port() conditionally copies uart->port.dev from up->port.dev only when up->port.dev is non-NULL: if (up->port.dev) { uart->port.dev = up->port.dev; ... } So if both the existing uart slot and up have a NULL ->dev, uart->port.dev remains NULL. The very next ACPI companion check then dereferences it unconditionally: if (!has_acpi_companion(uart->port.dev)) { has_acpi_companion() reads dev->fwnode without a NULL guard (include/linux/acpi.h), so this NULL-derefs the kernel for the remaining no-dev case rather than just skipping the mctrl_gpio_init() initialisation as intended. smatch flags the inconsistency: drivers/tty/serial/8250/8250_core.c:767 serial8250_register_8250_port() error: 'uart->port.dev' could be null (see line 719) Guard the call with a NULL check so register continues to work for callers that legitimately have no parent device (legacy non-OF/non-ACPI registrations). No functional change for callers that pass a non-NULL ->dev.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: goku_udc: avoid NULL deref of dev->driver in INT_USBRESET log goku_irq() handles a number of bus events under a single ep0 path. It already guards the gadget driver suspend/resume callbacks against a NULL ->driver: if (dev->gadget.speed != USB_SPEED_UNKNOWN && dev->driver && dev->driver->resume) { spin_unlock(&dev->lock); dev->driver->resume(&dev->gadget); ... } but the very next branch unconditionally dereferences dev->driver when an INT_USBRESET arrives: if (stat & INT_USBRESET) { ACK(INT_USBRESET); INFO(dev, "USB reset done, gadget %s\n", dev->driver->driver.name); } If the controller raises INT_USBRESET before any gadget driver has been bound (or after one has been unbound), dev->driver is NULL and the printk dereferences NULL. smatch flags the inconsistency: drivers/usb/gadget/udc/goku_udc.c:1618 goku_irq() error: we previously assumed 'dev->driver' could be null (see line 1607) Fall back to a placeholder when the gadget driver is not bound. No functional change while a gadget driver is bound.

In the Linux kernel, the following vulnerability has been resolved: omfs: handle set_blocksize failures omfs uses buffer_heads, which don't handle block size > PAGE_SIZE well. Without this, mounting we will hit the BUG_ON(offset >= folio_size(folio)); in folio_set_bh on the first __bread_gfp call.

In the Linux kernel, the following vulnerability has been resolved: bfs: handle set_blocksize failures bfs uses buffer_heads, which don't handle block size > PAGE_SIZE well. Without this, mounting will hit the BUG_ON(offset >= folio_size(folio)); in folio_set_bh on the first __bread_gfp call.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/userq: pin mqd and fw object bo to avoid eviction mqd and fw objects are queue core objects which should remain valid and never be unmapped and evicted for user queues to work properly. During eviction if these buffers are evicted the hw continue to use the invalid addresses and caused page faults and system hung.

In the Linux kernel, the following vulnerability has been resolved: coresight: perf: Retrieve path and source from event data ETM perf callbacks currently use the per-CPU csdev_src pointer, which can race with updates during device registration and unregistration. The AUX setup already builds and stores the path in the event data. Use this path to retrieve the source instead of csdev_src to avoid the race. Export coresight_get_source() and add etm_event_get_ctxt_path() to retrieve the context's path and its source with READ_ONCE() / WRITE_ONCE() accessors. Give the comments to explain why this approach is safe when pause or resume callbacks preempt the disable callback (e.g. via NMI).

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: phy: check length before parsing PHY status IE Hardware might report PHY status IE with unexpected length, and parser might access out of range. Check the length ahead.

In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Release m2m_ctx after Instance Removed from List Possible use after free if IRQ thread manages to obtain spinlock between m2m_ctx release and wave5_release function removing stream instance from list of active instances. The IRQ thread looks for the m2m_ctx which is freed so null pointer dereference occurs.

In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Fix Reports from Kernel Lock Validator handle_dynamic_resolution change requires that the state_lock be acquired based on the lockdep_assert_held. However, the handle_dynamic_resolution_change call in initialize_sequence does not properly obtain the lock before calling. Since the v4l2_ctrl_find and s_ctrl can sleep, they should not be called while a lock is already held. Store off the fbc_buf_count then properly update control once lock has been freed.

In the Linux kernel, the following vulnerability has been resolved: watchdog: lenovo_se10_wdt: Fix use-after-free and resource leak risk Review by sashiko.dev highlighted potential use after free and resource leak instances. Set se10_pdev to null to prevent use after free Remove DMI call back and instead directly call se10_create_platform_device. Handle error cases appropriately

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: avoid out-of-bounds access in monitor In NAN, we don't know on what band the frame will be sent. Therefore we set info->band to NUM_NL80211_BANDS. However, this leads to out-of-bound access in ieee80211_add_tx_radiotap_header when we try to access the sbands array. Fix it by not accessing the array if the band is NUM_NL80211_BANDS. This means that we will not report rate info for legacy rate in NAN. But nobody really cares about it.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix sd_ndr.data memory leak in ksmbd_vfs_set_sd_xattr ndr_encode_v4_ntacl() allocates sd_ndr.data via kzalloc() at entry. If any subsequent ndr_write_*() call returns error during encoding, the allocated sd_ndr.data won't be freed and causes memory leak. Move kfree(sd_ndr.data) into out label to ensure the buffer gets released on all success and error return paths.

In the Linux kernel, the following vulnerability has been resolved: perf: Fix addr_filter_ranges lifetime Lee Jia Jie reported that since event::addr_filter_ranges is used under RCU, it should be RCU freed.

In the Linux kernel, the following vulnerability has been resolved: netconsole: take target_cleanup_list_lock in drop_netconsole_target() drop_netconsole_target() unlinks the target while only holding target_list_lock. However, when the underlying interface has been unregistered, netconsole_netdev_event() moves the target from target_list to target_cleanup_list, and netconsole_process_cleanups_core() walks that list under target_cleanup_list_lock only. If a user removes the configfs target at the same time the cleanup worker is iterating target_cleanup_list, list_del() can corrupt the list because the two paths take disjoint locks while operating on the same list node. Acquire target_cleanup_list_lock around the list_del() so the unlink is serialised against netconsole_process_cleanups_core() regardless of which list the target currently belongs to. The state transition that downgrades STATE_DEACTIVATED to STATE_DISABLED is left intact and is performed under the same combined locking, preserving the existing ordering with resume_target().

In the Linux kernel, the following vulnerability has been resolved: cxl/region: Validate partition index before array access construct_region() reads cxled->part and uses it to index cxlds->part[] without checking for a negative value. If the partition was never resolved, part remains at its initial value of -1, causing an out-of-bounds array access. Add a guard to return -EBUSY when part is negative. The check was dropped during a merge.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/pm: fix SmartShift bias sysfs store PM refcount on parse error Return the parse error before acquiring PM access.

A vulnerability was determined in kvcache-ai mooncake up to 0.3.12/0.3.13.post1. This affects the function UnmountSegment of the component RPC Path Handler. This manipulation of the argument client_id/segment_id causes authorization bypass. Remote exploitation of the attack is possible. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

Unauthenticated remote command injection in the Brocade SANnav orchestrator HTTP service permits network-adjacent attackers to execute arbitrary administrative switch CLI commands and issue container management instructions. This could allow an attacker to alter Fibre Channel fabric switch configurations or manipulate application container runtimes. This vulnerability affects Brocade SANnav versions before 3.0.1a.

A vulnerability has been found in pmTicket Project-Management-Software up to 078fa56a782490c5059a0814f84df27984f4d7e2. This affects the function setSync of the file /ajax/add_project.php. Such manipulation of the argument conn_settings leads to sql injection. The attack may be launched remotely. This product operates on a rolling release basis, ensuring continuous delivery. Consequently, there are no version details for either affected or updated releases. The vendor was contacted early about this disclosure but did not respond in any way.

A flaw has been found in SEMCMS up to 4.2. Affected by this issue is some unknown functionality of the file /Edit/php/upload_json.php of the component KindEditor Upload Interface. This manipulation of the argument imgFile causes cross site scripting. The attack may be initiated remotely. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

GitLab has remediated an issue in GitLab CE/EE affecting all versions from 19.2 before 19.2.7, 19.3 before 19.3.3, and 19.4 before 19.4.1 that under certain conditions could have allowed an authenticated user to execute arbitrary code on the GitLab server due to a double free issue when parsing a specially crafted regular expression in a CI/CD configuration.

GitLab has remediated an issue in GitLab CE/EE affecting all versions from 19.1 before 19.2.7, 19.3 before 19.3.3, and 19.4 before 19.4.1 that under certain conditions could have allowed an authenticated user to spoof merge request authorship and attribute content to arbitrary existing users on the target instance due to improper reliance on ephemeral cache state during Direct Transfer imports.

GitLab has remediated an issue in GitLab EE affecting all versions from 18.7 before 19.2.7, 19.3 before 19.3.3, and 19.4 before 19.4.1 that under certain conditions could have allowed an authenticated user to access sensitive CI/CD variable values from debug-mode job traces through the Duo AI troubleshooting feature due to missing authorization checks.

GitLab has remediated an issue in GitLab EE affecting all versions from 19.1 before 19.2.7, 19.3 before 19.3.3, and 19.4 before 19.4.1 that under certain conditions could have allowed an authenticated user with developer-role permissions to bypass admin-configured AI tool governance controls for workflows in namespaces they do not control due to improper authorization checks.

GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.3 before 19.2.7, 19.3 before 19.3.3, and 19.4 before 19.4.1 that under certain conditions could have allowed an authenticated user with an MCP-scoped token to perform actions beyond the intended scope of that token due to improper authorization checks.

GitLab has remediated an issue in GitLab CE/EE affecting all versions from 18.6 before 19.2.7, 19.3 before 19.3.3, and 19.4 before 19.4.1 that under a race condition, the MCP search tool's shared state handling could have caused search results to be returned under an incorrect user context.