CVE Feed

Multiple vulnerabilities in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition of an affected device. These vulnerabilities are due to insufficient validation of CAPWAP packets. An attacker could exploit these vulnerabilities by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition on the affected device.

Multiple vulnerabilities in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition of an affected device. These vulnerabilities are due to insufficient validation of CAPWAP packets. An attacker could exploit these vulnerabilities by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition on the affected device.

Multiple vulnerabilities in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition of an affected device. These vulnerabilities are due to insufficient validation of CAPWAP packets. An attacker could exploit these vulnerabilities by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition on the affected device.

A vulnerability in the file system permissions of Cisco IOS XE Software could allow an authenticated, local attacker to obtain read and write access to critical configuration or system files. The vulnerability is due to insufficient file system permissions on an affected device. An attacker could exploit this vulnerability by connecting to an affected device's guest shell, and accessing or modifying restricted files. A successful exploit could allow the attacker to view or modify restricted information or configurations that are normally not accessible to system administrators.

A vulnerability in the IP Address Resolution Protocol (ARP) feature of Cisco IOS XE Software for Cisco ASR 1000 Series Aggregation Services Routers with a 20-Gbps Embedded Services Processor (ESP) installed could allow an unauthenticated, adjacent attacker to cause an affected device to reload, resulting in a denial of service condition. The vulnerability is due to insufficient error handling when an affected device has reached platform limitations. An attacker could exploit this vulnerability by sending a malicious series of IP ARP messages to an affected device. A successful exploit could allow the attacker to exhaust system resources, which would eventually cause the affected device to reload.

A vulnerability in the DHCP message handler of Cisco IOS XE Software for Cisco cBR-8 Converged Broadband Routers could allow an unauthenticated, remote attacker to cause the supervisor to crash, which could result in a denial of service (DoS) condition. The vulnerability is due to insufficient error handling when DHCP version 4 (DHCPv4) messages are parsed. An attacker could exploit this vulnerability by sending a malicious DHCPv4 message to or through a WAN interface of an affected device. A successful exploit could allow the attacker to cause a reload of the affected device. Note: On Cisco cBR-8 Converged Broadband Routers, all of the following are considered WAN interfaces: 10 Gbps Ethernet interfaces 100 Gbps Ethernet interfaces Port channel interfaces that include multiple 10 and/or 100 Gbps Ethernet interfaces

A vulnerability in the Umbrella Connector component of Cisco IOS XE Software for Cisco Catalyst 9200 Series Switches could allow an unauthenticated, remote attacker to trigger a reload, resulting in a denial of service condition on an affected device. The vulnerability is due to insufficient error handling when parsing DNS requests. An attacker could exploit this vulnerability by sending a series of malicious DNS requests to an Umbrella Connector client interface of an affected device. A successful exploit could allow the attacker to cause a crash of the iosd process, which triggers a reload of the affected device.

A vulnerability in the ISDN subsystem of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient input validation when the ISDN Q.931 messages are processed. An attacker could exploit this vulnerability by sending a malicious ISDN Q.931 message to an affected device. A successful exploit could allow the attacker to cause the process to crash, resulting in a reload of the affected device.

A vulnerability in the PROFINET handler for Link Layer Discovery Protocol (LLDP) messages of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause a crash on an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of LLDP messages in the PROFINET LLDP message handler. An attacker could exploit this vulnerability by sending a malicious LLDP message to an affected device. A successful exploit could allow the attacker to cause the affected device to reload.

Multiple vulnerabilities in the initialization routines that are executed during bootup of Cisco IOS XE Software for Cisco ASR 900 Series Aggregation Services Routers with a Route Switch Processor 3 (RSP3) installed could allow an authenticated, local attacker with high privileges to execute persistent code at bootup and break the chain of trust. These vulnerabilities are due to incorrect validations by boot scripts when specific ROM monitor (ROMMON) variables are set. An attacker could exploit these vulnerabilities by copying a specific file to the local file system of an affected device and defining specific ROMMON variables. A successful exploit could allow the attacker to run arbitrary code on the underlying operating system (OS) with root privileges. To exploit these vulnerabilities, an attacker would need to have access to the root shell on the device or have physical access to the device.

A vulnerability in the web server authentication of Cisco IOS XE Software could allow an authenticated, remote attacker to crash the web server on the device. The vulnerability is due to insufficient input validation during authentication. An attacker could exploit this vulnerability by entering unexpected characters during a valid authentication. A successful exploit could allow the attacker to crash the web server on the device, which must be manually recovered by disabling and re-enabling the web server.

A vulnerability in the Cisco IOS XE ROM Monitor (ROMMON) Software for Cisco 4000 Series Integrated Services Routers, Cisco ASR 920 Series Aggregation Services Routers, Cisco ASR 1000 Series Aggregation Services Routers, and Cisco cBR-8 Converged Broadband Routers could allow an unauthenticated, physical attacker to break the chain of trust and load a compromised software image on an affected device. The vulnerability is due to the presence of a debugging configuration option in the affected software. An attacker could exploit this vulnerability by connecting to an affected device through the console, forcing the device into ROMMON mode, and writing a malicious pattern using that specific option on the device. A successful exploit could allow the attacker to break the chain of trust and load a compromised software image on the affected device. A compromised software image is any software image that has not been digitally signed by Cisco.

A vulnerability in the Common Open Policy Service (COPS) engine of Cisco IOS XE Software on Cisco cBR-8 Converged Broadband Routers could allow an unauthenticated, remote attacker to crash a device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a malformed COPS message to the device. A successful exploit could allow the attacker to crash the device.

A vulnerability in the Polaris kernel of Cisco Catalyst 9200 Series Switches could allow an unauthenticated, remote attacker to crash the device. The vulnerability is due to insufficient packet size validation. An attacker could exploit this vulnerability by sending jumbo frames or frames larger than the configured MTU size to the management interface of this device. A successful exploit could allow the attacker to crash the device fully before an automatic recovery.

A vulnerability in the Ethernet packet handling of Cisco Aironet Access Points (APs) Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by connecting as a wired client to the Ethernet interface of an affected device and sending a series of specific packets within a short time frame. A successful exploit could allow the attacker to cause a NULL pointer access that results in a reload of the affected device.

A vulnerability in Cisco Aironet Access Point (AP) Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to improper handling of clients that are trying to connect to the AP. An attacker could exploit this vulnerability by sending authentication requests from multiple clients to an affected device. A successful exploit could allow the attacker to cause the affected device to reload.

A vulnerability in Cisco Aironet Access Points (APs) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) on an affected device. The vulnerability is due to improper resource management while processing specific packets. An attacker could exploit this vulnerability by sending a series of crafted UDP packets to a specific port on an affected device. A successful exploit could either allow the attacker to tear down the connection between the AP and the wireless LAN controller, resulting in the affected device not being able to process client traffic, or cause the vulnerable device to reload, triggering a DoS condition. After the attack, the affected device should automatically recover its normal functions without manual intervention.

In ORY Fosite (the security first OAuth2 & OpenID Connect framework for Go) before version 0.31.0, when using "private_key_jwt" authentication the uniqueness of the `jti` value is not checked. When using client authentication method "private_key_jwt", OpenId specification says the following about assertion `jti`: "A unique identifier for the token, which can be used to prevent reuse of the token. These tokens MUST only be used once, unless conditions for reuse were negotiated between the parties". Hydra does not seem to check the uniqueness of this `jti` value. This problem is fixed in version 0.31.0.

In ORY Fosite (the security first OAuth2 & OpenID Connect framework for Go) before version 0.34.0, the `TokenRevocationHandler` ignores errors coming from the storage. This can lead to unexpected 200 status codes indicating successful revocation while the token is still valid. Whether an attacker can use this for her advantage depends on the ability to trigger errors in the store. This is fixed in version 0.34.0

ismartgate PRO 1.5.9 is vulnerable to clickjacking.

ismartgate PRO 1.5.9 is vulnerable to malicious file uploads via the form for uploading sounds to garage doors. The magic bytes for WAV must be used.

ismartgate PRO 1.5.9 is vulnerable to privilege escalation by appending PHP code to /cron/mailAdmin.php.

ismartgate PRO 1.5.9 is vulnerable to privilege escalation by appending PHP code to /cron/checkUserExpirationDate.php.

ismartgate PRO 1.5.9 is vulnerable to privilege escalation by appending PHP code to /cron/checkExpirationDate.php.

ismartgate PRO 1.5.9 is vulnerable to malicious file uploads via the form for uploading images to garage doors. The magic bytes of PNG must be used.

ismartgate PRO 1.5.9 is vulnerable to CSRF that allows remote attackers to upload sound files via /index.php

ismartgate PRO 1.5.9 is vulnerable to CSRF that allows remote attackers to upload imae files via /index.php

iSmartgate PRO 1.5.9 is vulnerable to CSRF via the busca parameter in the form used for searching for users, accessible via /index.php. (This can be combined with reflected XSS.)

iSmartgate PRO 1.5.9 is vulnerable to CSRF that allows remote attackers to create a new user via /index.php.

iSmartgate PRO 1.5.9 is vulnerable to CSRF that allows remote attackers to open/close a specified garage door/gate via /isg/opendoor.php.

In Liferay Portal before 7.3.1, Liferay Portal 6.2 EE, and Liferay DXP 7.2, DXP 7.1 and DXP 7.0, the property 'portlet.resource.id.banned.paths.regexp' can be bypassed with doubled encoded URLs.

DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was withdrawn by its CNA. Notes: none

DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was withdrawn by its CNA. Notes: none

An SQL injection vulnerability exists in the CHaD.asmx web service functionality of eDNA Enterprise Data Historian 3.0.1.2/7.5.4989.33053. Specially crafted SOAP web requests can cause SQL injections resulting in data compromise. Parameter InstanceName in CHaD.asmx is vulnerable to unauthenticated SQL injection attacks.

An issue was discovered on Gemtek WRTM-127ACN 01.01.02.141 and WRTM-127x9 01.01.02.127 devices. The Monitor Diagnostic network page allows an authenticated attacker to execute a command directly on the target machine. Commands are executed as the root user (uid 0). (Even if a login is required, most routers are left with default credentials.)

SQL injection vulnerability exists in the CHaD.asmx web service functionality of eDNA Enterprise Data Historian 3.0.1.2/7.5.4989.33053. Specially crafted SOAP web requests can cause SQL injections resulting in data compromise. Parameter ClassName in CHaD.asmx is vulnerable to unauthenticated SQL injection attacks.

An SQL injection vulnerability exists in the CHaD.asmx web service functionality of eDNA Enterprise Data Historian 3.0.1.2/7.5.4989.33053. Specially crafted SOAP web requests can cause SQL injections resulting in data compromise. Parameter InstancePath in CHaD.asmx is vulnerable to unauthenticated SQL injection attacks.

DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was withdrawn by its CNA. Notes: none

DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was withdrawn by its CNA. Notes: none

Parameter psClass in ednareporting.asmx is vulnerable to unauthenticated SQL injection attacks. Specially crafted SOAP web requests can cause SQL injections resulting in data compromise. An attacker can send unauthenticated HTTP requests to trigger this vulnerability.

Parameter AttFilterValue in ednareporting.asmx is vulnerable to unauthenticated SQL injection attacks. Specially crafted SOAP web requests can cause SQL injections resulting in data compromise. An attacker can send unauthenticated HTTP requests to trigger this vulnerability.

DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was withdrawn by its CNA. Notes: none

DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was withdrawn by its CNA. Notes: none

The login page in Telmat AccessLog <= 6.0 (TAL_20180415) allows an attacker to get root shell access via Unauthenticated code injection over the network.

The ping page of the administration panel in Telmat AccessLog <= 6.0 (TAL_20180415) allows an attacker to get root shell access via authenticated code injection over the network.

An improper neutralization of script-related HTML tags in a web page in FortiManager 6.2.0, 6.2.1, 6.2.2, and 6.2.3and FortiAnalyzer 6.2.0, 6.2.1, 6.2.2, and 6.2.3 may allow an attacker to execute a cross site scripting (XSS) via the Identify Provider name field.

An improper neutralization of input vulnerability in FortiTester before 3.9.0 may allow a remote authenticated attacker to inject script related HTML tags via IPv4/IPv6 address fields.

An improper neutralization of input vulnerability in FortiAnalyzer before 6.4.1 and 6.2.5 may allow a remote authenticated attacker to inject script related HTML tags via Name parameter of Storage Connectors.

An insufficient logging vulnerability in FortiGate before 6.4.1 may allow the traffic from an unauthenticated attacker to Fortinet owned IP addresses to go unnoticed.

An improper neutralization of input vulnerability in FortiNAC before 8.7.2 may allow a remote authenticated attacker to perform a stored cross site scripting attack (XSS) via the UserID of Admin Users.