CVE Feed

<p>A remote code execution vulnerability exists when Active Directory integrated DNS (ADIDNS) mishandles objects in memory. An authenticated attacker who successfully exploited the vulnerability could run arbitrary code in the context of the Local System Account</p> <p>To exploit the vulnerability, an authenticated attacker could send malicious requests to an Active Directory integrated DNS (ADIDNS) server.</p> <p>The update addresses the vulnerability by correcting how Active Directory integrated DNS (ADIDNS) handles objects in memory.</p>

<p>An information disclosure vulnerability exists when Active Directory integrated DNS (ADIDNS) mishandles objects in memory. An authenticated attacker who successfully exploited this vulnerability would be able to read sensitive information about the target system.</p> <p>To exploit this condition, an authenticated attacker would need to send a specially crafted request to the AD|DNS service. Note that the information disclosure vulnerability by itself would not be sufficient for an attacker to compromise a system. However, an attacker could combine this vulnerability with additional vulnerabilities to further exploit the system.</p> <p>The update addresses the vulnerability by correcting how Active Directory integrated DNS (ADIDNS) handles objects in memory.</p>

<p>An elevation of privilege vulnerability exists when the Windows RSoP Service Application improperly handles memory.</p> <p>To exploit this vulnerability, an attacker would first have to gain execution on the victim system. An attacker could then run a specially crafted application to elevate privileges.</p> <p>The security update addresses the vulnerability by correcting how the Windows RSoP Service Application handles memory.</p>

An issue was discovered in PrimeKey EJBCA 6.x and 7.x before 7.4.1. When using a client certificate to enroll over the EST protocol, no revocation check is performed on that certificate. This vulnerability can only affect a system that has EST configured, uses client certificates to authenticate enrollment, and has had such a certificate revoked. This certificate needs to belong to a role that is authorized to enroll new end entities. (To completely mitigate this problem prior to upgrade, remove any revoked client certificates from their respective roles.)

The vulnerability have been reported to affect earlier versions of Helpdesk. If exploited, this improper certificate validation vulnerability could allow an attacker to spoof a trusted entity by interfering in the communication path between the host and client. QNAP has already fixed the issue in Helpdesk 3.0.3 and later.

The vulnerability have been reported to affect earlier versions of Helpdesk. If exploited, this information exposure vulnerability could disclose sensitive information. QNAP has already fixed the issue in Helpdesk 3.0.3 and later.

The vulnerability have been reported to affect earlier versions of Helpdesk. If exploited, this cross-site request forgery (CSRF) vulnerability could allow attackers to force NAS users to execute unintentional actions through a web application. QNAP has already fixed the issue in Helpdesk 3.0.3 and later.

In Xiaomi router R3600 ROM version<1.0.66, filters in the set_WAN6 interface can be bypassed, causing remote code execution. The router administrator can gain root access from this vulnerability.

Memory overflow in Xiaomi AI speaker Rom version <1.59.6 can happen when the speaker verifying a malicious firmware during OTA process.

When using the StreamGenerator, the code parse a user-provided XML. A specially crafted XML, including external system entities, could be used to access any file on the server system.

Huawei smartphones BLA-A09 versions 8.0.0.123(C212),versions earlier than 8.0.0.123(C567),versions earlier than 8.0.0.123(C797);BLA-TL00B versions earlier than 8.1.0.326(C01);Berkeley-L09 versions earlier than 8.0.0.163(C10),versions earlier than 8.0.0.163(C432),Versions earlier than 8.0.0.163(C636),Versions earlier than 8.0.0.172(C10);Duke-L09 versions Duke-L09C10B187, versions Duke-L09C432B189, versions Duke-L09C636B189;HUAWEI P20 versions earlier than 8.0.1.16(C00);HUAWEI P20 Pro versions earlier than 8.1.0.152(C00);Jimmy-AL00A versions earlier than Jimmy-AL00AC00B172;LON-L29D versions LON-L29DC721B192;NEO-AL00D versions earlier than 8.1.0.172(C786);Stanford-AL00 versions Stanford-AL00C00B123;Toronto-AL00 versions earlier than Toronto-AL00AC00B225;Toronto-AL00A versions earlier than Toronto-AL00AC00B225;Toronto-TL10 versions earlier than Toronto-TL10C01B225 have an information vulnerability. A module has a design error that is lack of control of input. Attackers can exploit this vulnerab

In Patient Information Center iX (PICiX) Versions B.02, C.02, C.03, the product exposes a resource to the wrong control sphere, providing unintended actors with inappropriate access to the resource. The application on the surveillance station operates in kiosk mode, which is vulnerable to local breakouts that could allow an attacker with physical access to escape the restricted environment with limited privileges.

In Patient Information Center iX (PICiX) Versions C.02, C.03, PerformanceBridge Focal Point Version A.01, the product receives input that is expected to be well-formed (i.e., to comply with a certain syntax) but it does not validate or incorrectly validates that the input complies with the syntax, causing the certificate enrollment service to crash. It does not impact monitoring but prevents new devices from enrolling.

In IntelliVue patient monitors MX100, MX400-550, MX600, MX700, MX750, MX800, MX850, MP2-MP90, and IntelliVue X2 and X3 Versions N and prior, the product receives input or data but does not validate or incorrectly validates that the input has the properties required to process the data safely and correctly, which can induce a denial-of-service condition through a system restart.

In Patient Information Center iX (PICiX) Versions C.02, C.03, the software parses a formatted message or structure but does not handle or incorrectly handles a length field that is inconsistent with the actual length of the associated data, causing the application on the surveillance station to restart.

In Patient Information Center iX (PICiX) Versions C.02 and C.03, PerformanceBridge Focal Point Version A.01, IntelliVue patient monitors MX100, MX400-MX550, MX750, MX850, and IntelliVue X3 Versions N and prior, the software does not check or incorrectly checks the revocation status of a certificate, which may cause it to use a compromised certificate.

In Patient Information Center iX (PICiX) Version B.02, C.02, C.03, and PerformanceBridge Focal Point Version A.01, when an actor claims to have a given identity, the software does not prove or insufficiently proves the claim is correct.

In Patient Information Center iX (PICiX) Versions B.02, C.02, C.03, the software saves user-provided information into a comma-separated value (CSV) file, but it does not neutralize or incorrectly neutralizes special elements that could be interpreted as a command when the file is opened by spreadsheet software.

In Patient Information Center iX (PICiX) Versions B.02, C.02, C.03, the software does not neutralize or incorrectly neutralizes user-controllable input before it is placed in output that is then used as a webpage and served to other users. Successful exploitation could lead to unauthorized access to patient data via a read-only web application.

A deserialization flaw is present in Taoensso Nippy before 2.14.2. In some circumstances, it is possible for an attacker to create a malicious payload that, when deserialized, will allow arbitrary code to be executed. This occurs because there is automatic use of the Java Serializable interface.

An issue was discovered in InspIRCd 2 before 2.0.28 and 3 before 3.3.0. The mysql module contains a NULL pointer dereference when built against mariadb-connector-c 3.0.5 or newer. When combined with the sqlauth or sqloper modules, this vulnerability can be used for remote crashing of an InspIRCd server by any user able to connect to a server.

An issue was discovered in InspIRCd 3 before 3.1.0. The silence module contains a use after free vulnerability. This vulnerability can be used for remote crashing of an InspIRCd server by any user able to fully connect to a server.

An issue was discovered in InspIRCd 2 before 2.0.29 and 3 before 3.6.0. The pgsql module contains a use after free vulnerability. When combined with the sqlauth or sqloper modules, this vulnerability can be used for remote crashing of an InspIRCd server by any user able to connect to a server.

An issue was discovered in Hyland OnBase through 18.0.0.32 and 19.x through 19.8.9.1000. Directory traversal exists for writing to files, as demonstrated by the FileName parameter.

An issue was discovered in Hyland OnBase through 16.0.2.83 and below, 17.0.2.109 and below, 18.0.0.37 and below, 19.8.16.1000 and below and 20.3.10.1000 and below. Directory traversal exists for reading files, as demonstrated by the FileName parameter.

An issue was discovered in Hyland OnBase 16.0.2.83 and below, 17.0.2.109 and below, 18.0.0.37 and below, 19.8.16.1000 and below and 20.3.10.1000 and below. The server typically logs activity only when a client application specifies that logging is desired. This can be problematic for use cases in a regulated industry, where server-side logging is required in additional situations.

An issue was discovered in Hyland OnBase 16.0.2.83 and below, 17.0.2.109 and below, 18.0.0.37 and below, 19.8.16.1000 and below and 20.3.10.1000 and below. Client applications can write arbitrary data to the server logs.

An issue was discovered in Hyland OnBase 16.0.2.83 and below, 17.0.2.109 and below, 18.0.0.37 and below, 19.8.16.1000 and below and 20.3.10.1000 and below. Client-side authentication is used for critical functions such as adding users or retrieving sensitive information.

An issue was discovered in Hyland OnBase through 16.0.2.83 and below, 17.0.2.109 and below, 18.0.0.37 and below, 19.8.16.1000 and below and 20.3.10.1000 and below. CSRF can be used to log in a user, and then perform actions, because there are default credentials (the wstinol password for the manager or hsi account).

An issue was discovered in Hyland OnBase 16.0.2.83 and below, 17.0.2.109 and below, 18.0.0.37 and below, 19.8.16.1000 and below and 20.3.10.1000 and below. It allows SQL injection, as demonstrated by the TableName, ColumnName, Name, UserId, or Password parameter.

An issue was discovered in Hyland OnBase 16.0.2.83 and below, 17.0.2.109 and below, 18.0.0.37 and below, 19.8.16.1000 and below and 20.3.10.1000 and below. It allows SQL injection, as demonstrated by TestConnection_LocalOrLinkedServer, CreateFilterFriendlyView, or AddWorkViewLinkedServer.

An issue was discovered in Hyland OnBase 16.0.2.83 and below, 17.0.2.109 and below, 18.0.0.37 and below, 19.8.16.1000 and below and 20.3.10.1000 and below. It allows remote attackers to cause a denial of service (outage of connection-request processing) via a long user ID, which triggers an exception and a large log entry.

An issue was discovered in Hyland OnBase 16.0.2.83 and below, 17.0.2.109 and below, 18.0.0.37 and below, 19.8.16.1000 and below and 20.3.10.1000 and below. PKI certificates have a private key that is the same across different customers' installations.

An issue was discovered in Hyland OnBase 16.0.2.83 and below, 17.0.2.109 and below, 18.0.0.37 and below, 19.8.16.1000 and below and 20.3.10.1000 and below. It allows XXE attacks for read/write access to arbitrary files.

An issue was discovered in Hyland OnBase 16.0.2.83 and below, 17.0.2.109 and below, 18.0.0.37 and below, 19.8.16.1000 and below and 20.3.10.1000 and below. It uses ASP.NET BinaryFormatter.Deserialize in a manner that allows attackers to transmit and execute bytecode in SOAP messages.

An issue was discovered in Hyland OnBase 16.0.2.83 and below, 17.0.2.109 and below, 18.0.0.37 and below, 19.8.16.1000 and below and 20.3.10.1000 and below. It uses XML deserialization libraries in an unsafe manner.

An issue was discovered in Hyland OnBase 16.0.2.83 and below, 17.0.2.109 and below, 18.0.0.37 and below, 19.8.16.1000 and below and 20.3.10.1000 and below. It allows remote attackers to execute arbitrary code because of unsafe JSON deserialization.

An issue was discovered in the Linux kernel before 5.8.10. virt/kvm/kvm_main.c has a kvm_io_bus_unregister_dev memory leak upon a kmalloc failure, aka CID-f65886606c2d.

hw/usb/hcd-ohci.c in QEMU 5.0.0 has a stack-based buffer over-read via values obtained from the host controller driver.

hw/usb/hcd-ohci.c in QEMU 5.0.0 has an infinite loop when a TD list has a loop.

An issue was discovered in the Linux kernel before 5.9. arch/x86/kvm/svm/sev.c allows attackers to cause a denial of service (soft lockup) by triggering destruction of a large SEV VM (which requires unregistering many encrypted regions), aka CID-7be74942f184.

On desktop, Ubuntu UI Toolkit's StateSaver would serialise data on tmp/ files which an attacker could use to expose potentially sensitive data. StateSaver would also open files without the O_EXCL flag. An attacker could exploit this to launch a symlink attack, though this is partially mitigated by symlink and hardlink restrictions in Ubuntu. Fixed in 1.1.1188+14.10.20140813.4-0ubuntu1.

In XWiki before versions 11.10.5 or 12.2.1, any user with SCRIPT right (EDIT right before XWiki 7.4) can gain access to the application server Servlet context which contains tools allowing to instantiate arbitrary Java objects and invoke methods that may lead to arbitrary code execution. The only workaround is to give SCRIPT right only to trusted users.

apollo-adminservice before version 1.7.1 does not implement access controls. If users expose apollo-adminservice to internet(which is not recommended), there are potential security issues since apollo-adminservice is designed to work in intranet and it doesn't have access control built-in. Malicious hackers may access apollo-adminservice apis directly to access/edit the application's configurations. To fix the potential issue without upgrading, simply follow the advice that do not expose apollo-adminservice to internet.

Adobe FrameMaker version 2019.0.6 (and earlier versions) has an out-of-bounds read vulnerability that could be exploited to read past the end of an allocated buffer, possibly resulting in a crash or disclosure of sensitive information from other memory locations. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious FrameMaker file.

Adobe FrameMaker version 2019.0.6 (and earlier versions) lacks proper validation of the length of user-supplied data prior to copying it to a fixed-length stack-based buffer. This could be exploited to execute arbitrary code with the privileges of the current user. User interaction is required to exploit this vulnerability in that the target must open a malicious FrameMaker file.

A memory corruption vulnerability exists in InDesign 15.1.1 (and earlier versions). Insecure handling of a malicious indd file could be abused to cause an out-of-bounds memory access, potentially resulting in code execution in the context of the current user.

A memory corruption vulnerability exists in InDesign 15.1.1 (and earlier versions). Insecure handling of a malicious indd file could be abused to cause an out-of-bounds memory access, potentially resulting in code execution in the context of the current user.

A memory corruption vulnerability exists in InDesign 15.1.1 (and earlier versions). Insecure handling of a malicious indd file could be abused to cause an out-of-bounds memory access, potentially resulting in code execution in the context of the current user.

A memory corruption vulnerability exists in InDesign 15.1.1 (and earlier versions). Insecure handling of a malicious indd file could be abused to cause an out-of-bounds memory access, potentially resulting in code execution in the context of the current user.