CVE Feed

Dell Command | Integration Suite for System Center, versions prior to 6.7.2, contain an Incorrect Default Permissions vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Information Disclosure.

Dell Command Powershell Provider (DCPP), versions prior to 2.10.2 contain an Insertion of Sensitive Information into Log File vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Information Disclosure.

jshERP through 3.6 contains an authorization bypass vulnerability in the userBusiness CRUD endpoints that allows authenticated users to create, modify, or delete authorization-relation rows without privilege checks. Attackers can manipulate user-role mappings and access controls to escalate privileges, strip access from other accounts, or modify role-function relationships for any user in the tenant.

jshERP through 3.6 fails to validate object ownership in by-id info, update, and delete endpoints across multiple resource types. Authenticated users can read, modify, and delete other users' business objects by submitting direct object identifiers without authorization checks.

jshERP through 3.6 fails to validate caller permissions in role management endpoints, allowing authenticated users to modify any role's data scope or delete roles. Attackers can exploit the /role/update and /role/delete endpoints to escalate privileges, change data visibility to all data, and access all business records in the tenant.

jshERP through 3.6 fails to properly validate user privileges in SystemConfigService.updateSystemConfig, allowing authenticated users to modify tenant system configuration. Attackers can rewrite or delete tenant-wide settings covering company identity, stock rules, approval behavior, and printing configuration through the systemConfig endpoint.

jshERP through 3.6 contains a tenant isolation bypass vulnerability that allows authenticated users to read other tenants' records via the GET /tenant/info endpoint. Attackers can iterate the primary key to enumerate and access sensitive tenant data including login names, validity dates, user quotas, and enabled state across all platform tenants.

jshERP through 3.6 is missing an authorization check on the POST /userBusiness/updateBtnStr endpoint that allows authenticated users to modify role button-permission definitions. Attackers can supply arbitrary roleId and btnStr parameters to overwrite button-permission configurations for any role in the tenant without privilege validation.

jshERP through 3.6 fails to redact password hashes in the /user/info endpoint, allowing authenticated users to retrieve unsalted MD5 password digests for any user. Attackers can request arbitrary user information by supplying user IDs to obtain password hashes usable for offline cracking or direct authentication bypass.

jshERP through 3.6 contains an authorization bypass vulnerability in the POST /user/resetPwd endpoint that allows authenticated users to reset any other user's password. Attackers can submit a request with an arbitrary target user ID to reset that account's password to a known default value, enabling unauthorized access to other user accounts including administrators.

jshERP 3.6 contains a privilege escalation vulnerability in the updateOneValueByKeyIdAndType endpoint that allows authenticated users to grant themselves arbitrary roles. Attackers can send a POST request with type=UserRole, their own user ID, and a role ID list to escalate from low-privilege tenant user to tenant administrator.

Dell Command | Intel vPro Out of Band, versions prior to 4.7.2, contain an Incorrect Default Permissions vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Information Disclosure.

A flaw was found in libstoragemgmt. An attacker with control over a local or virtual storage device could provide specially crafted SCSI (Small Computer System Interface) Vital Product Data (VPD) page 0x80 data. This malformed data, specifically an untrusted page length field, can lead to a stack buffer overflow in the `_sg_parse_vpd_80()` function during serial number parsing. Successful exploitation could result in a denial of service by crashing or destabilizing the process querying the serial number.

This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

InvenTree is an Open Source Inventory Management System. Prior to 1.4.0, the POST /api/machine/{pk}/restart/ endpoint in src/backend/InvenTree/machine/api.py uses IsAuthenticatedOrReadScope without requiring the ADMIN role used by other machine management operations. Any authenticated user who lacks the ADMIN role, including a warehouse user with only the STOCK role, can cause MachineRestart to invoke registry.restart_machine() for any registered machine, resetting its status and interrupting active printing, scanning, or other machine operations. This issue is fixed in version 1.4.0.

Graylog is a free and open log management platform. From 6.3.0 until 6.3.14, 7.0.9, and 7.1.4, the view update API for saved searches and dashboards permits a user with edit permission but without entity ownership to include a shareRequest that grants owner permissions to an arbitrary account. The selected account can then delete the saved search or dashboard or remove the original owner's access. Graylog Cloud was patched before the advisory was published. This issue is fixed in versions 6.3.14, 7.0.9, and 7.1.4.

HomeBox is a home inventory and organization system. Prior to 0.26.0, the default-on BlockBogonNets and BlockCloudMetadata notifier SSRF protections in backend/internal/sys/validate/notifier_url.go do not inspect IPv4 destinations embedded in the NAT64 prefixes 64:ff9b::/96 and 64:ff9b:1::/48. An authenticated user can submit a generic:// notifier through POST /v1/notifiers or POST /v1/notifiers/test, and on a Homebox instance that egresses through NAT64/DNS64, the gateway can translate an accepted IPv6 destination to cloud metadata, localhost, or another internal IPv4 host. The notifier test path returns delivery result information, and Shoutrrr propagates the response, providing feedback that can disclose retrieved metadata such as temporary credentials. Without NAT64 egress, the crafted IPv6 destination is not routable, but the guard still incorrectly classifies it as safe. This issue is fixed in version 0.26.0.

HomeBox is a home inventory and organization system. Prior to 0.26.0, HandleWipeInventory in backend/app/api/handlers/v1/v1_ctrl_actions.go authorizes POST /v1/actions/wipe-inventory through the global ctx.User.IsOwner value instead of the caller's role in the active group, while the active group is selected through the X-Tenant request header. Because every self-registered user who creates a group receives the global owner value, a user who is also a member of another group can select that group with X-Tenant and permanently delete its complete inventory, which is not recoverable without external backups. This issue is fixed in version 0.26.0.

HomeBox is a home inventory and organization system. Prior to 0.26.0, POST /v1/groups/members invokes HandleGroupMemberAdd and GroupService.AddMember using a caller-supplied userID without requiring an owner role, an invitation token, target-user consent, or target-user notification. Any authenticated user can force another account into the caller's group, disclose the target user's email address and name through the resulting member list, and create the membership prerequisite used by a separate cross-group inventory-wipe vulnerability. This issue is fixed in version 0.26.0.

HomeBox is a home inventory and organization system. Prior to 0.26.0, MaintenanceEntryRepository.Update and MaintenanceEntryRepository.Delete in backend/internal/data/repo/repo_maintenance_entry.go use UpdateOneID(id) and DeleteOneID(id) without verifying that the maintenance entry belongs to the authenticated user's active group. An authenticated low-privileged user who knows or enumerates another tenant's maintenance-entry UUID can overwrite that record or permanently delete it. This issue is fixed in version 0.26.0.

HomeBox is a home inventory and organization system. Prior to 0.26.0, NotifierRepository.Update in backend/internal/data/repo/repo_notifier.go updates a notifier through UpdateOneID(id) without requiring the record's user ID to match the authenticated user. An authenticated user who supplies another tenant's notifier UUID to PUT /v1/notifiers/{id} can read the returned stored url, which may contain plaintext Shoutrrr credentials for Slack, SMTP, Telegram, Pushover, or Discord, and can replace the URL to redirect the victim's notifications to an attacker-controlled webhook. This issue is fixed in version 0.26.0.

KubeEdge is an open source system for extending native containerized application orchestration capabilities to hosts at Edge. From 1.21.0 until 1.21.2, 1.22.2, and 1.23.1, ConfigUpdateJob processing in edge/pkg/taskmanager/actions/configupdatejob.go concatenates authenticated user-controlled updateFields values into the keadm config-update command and executes it through a system shell. A user with permission to create or modify ConfigUpdateJob resources can include shell metacharacters in the complete --set value and cause arbitrary commands to execute on an enrolled target edge node with the privileges of the KubeEdge process handling the job. This issue is fixed in versions 1.21.2, 1.22.2, and 1.23.1.

CKAN MCP Server is a tool for querying CKAN open data portals. Prior to version 0.4.108, the SSRF guard `validateServerUrl` (added for CVE-2026-33060, extended for CVE-2026-53509) validates only the hostname string and never resolves DNS. Any caller-supplied `server_url` whose hostname *resolves* to an internal address passes the guard, so the server issues requests to loopback and cloud metadata (`169.254.169.254`). This is a third bypass of the same guard, and it reaches IMDS — strictly more than CVE-2026-53509, which only reached loopback. Version 0.4.108 contains an updated fix.

Telegram Desktop before 6.9.4 allows XSS in the HTML exporter. (The first fixed stable version is 7.0.1.) This occurs in button.text.toUtf8 in export_output_html.cpp. Exploitation cannot occur unless HTML export was used by a victim. However, the exploit payload can be exported if a message were forwarded into a group by a member (it is not necessary for the message author to be a member of a group).

Email::Sender::Transport::Sendmail versions before 2.602 for Perl allow arbitrary command execution on Windows sending a message whose envelope address reaches the shell in _sendmail_pipe. On MSWin32 the envelope sender and every recipient go into a single command string, which open() passes to a shell. Every other platform gets the list form, which runs sendmail directly. When the caller supplies no envelope, Email::Sender::Simple takes the recipients from the To and Cc headers and the sender from the From header. An attacker who controls one of those header addresses runs commands as the sending process.

KubeEdge is an open source system for extending native containerized application orchestration capabilities to hosts at Edge. From 1.16.0 until 1.21.2, 1.22.2, and 1.23.1, the DecompressTarGz function in keadm/cmd/keadm/app/cmd/util/common.go joins archive entry names to the extraction destination without sufficient validation. During keadm join or installation on Windows edge nodes, an archive influenced through a compromised, replaced, or untrusted download source can contain parent-directory components, Windows-style backslashes, absolute paths, or drive-prefixed paths that escape the intended directory. The affected keadm process can consequently write or overwrite files with its own privileges, potentially modifying configuration, executable, or service files and enabling persistent system modification or code execution. This issue is fixed in versions 1.21.2, 1.22.2, and 1.23.1.

KubeEdge is an open source system for extending native containerized application orchestration capabilities to hosts at Edge. From 1.0.0 until 1.21.2, 1.22.2, and 1.23.1, Reader.Read in pkg/viaduct/pkg/packer trusts the 32-bit PackageHeader.PayloadLen received through the CloudHub viaduct message-processing path and allocates that amount of memory before validating an upper bound. An authenticated malicious or compromised edge peer can repeatedly send crafted headers with excessive declared lengths, causing memory exhaustion, CloudHub process termination or restart loops, and temporary disruption of cloud-edge communication. This issue does not provide unauthenticated access or direct code execution. This issue is fixed in versions 1.21.2, 1.22.2, and 1.23.1.

KubeEdge is an open source system for extending native containerized application orchestration capabilities to hosts at Edge. From 1.12.0 until 1.21.2, 1.22.2, and 1.23.1, the v1alpha2 NodeUpgradeJob handler in edge/pkg/taskmanager/actions/nodeupgradejob.go concatenates authenticated user-controlled spec.version and spec.image values into the keadm upgrade edge shell command. A user with permission to create or update NodeUpgradeJob resources can supply shell metacharacters in either field, causing arbitrary commands to execute on targeted edge nodes with the privileges of the upgrade process and compromising node confidentiality, integrity, and availability. This issue is fixed in versions 1.21.2, 1.22.2, and 1.23.1.

deepstream is a server that allows clients and backend services to sync data, send messages and make rpcs at scale. From 10.1.0 until 10.1.1, src/services/permission/valve/rules-map.ts omits RECORD_ACTION.PATCH_MULTI from RULES_MAP. When an authenticated user sends a PATCH_MULTI record operation while permission.type is config, getRulesForMessage returns a null rule specification and ConfigPermission.canPerformAction treats the missing specification as an unconditional allow instead of applying RULE_TYPES.WRITE. Any authenticated user can therefore modify arbitrary protected records, corrupt application state, or cause service disruption; deployments using the default permission type none already allow all operations and are not additionally affected. This issue is fixed in version 10.1.1.

Dasel is a command-line tool and library for querying, modifying, and transforming data structures. From 3.0.0 until 3.11.1, parsing/json/json_reader.go decodeValue, decodeObject, and decodeArray, and parsing/xml/reader.go parseElement, recurse once per input nesting level without a depth guard. Deeply nested attacker-controlled JSON or XML supplied through parsing.Format(...).NewReader(...).Read(data), the command-line interface, or the parse selector function can exhaust the Go goroutine stack and raise an unrecoverable fatal error that terminates the entire process. The XML input-size limit does not prevent depth exhaustion, and defer or recover cannot intercept the failure. This issue is fixed in version 3.11.1.

A flaw was found in the SmallRye Fault Tolerance library, which is used by Quarkus to provide strategies like retries and circuit breakers for microservices. The issue occurs when using the ApplyGuard or ApplyFaultTolerance annotations, where the library fails to release internal tracking objects after each request. This causes a steady increase in memory usage that eventually leads to the application slowing down and crashing due to lack of memory.

Dasel is a command-line tool and library for querying, modifying, and transforming data structures. From 3.0.0 until 3.11.2, selector/lexer/tokenize.go parseCurRune advances the input index across trailing whitespace and then reads the source at the exhausted index without an end-of-input check. A selector ending in whitespace, including input passed through lexer.NewTokenizer(...).Tokenize() or dasel.Query, can therefore cause an index-out-of-range panic and terminate the process. This issue is fixed in version 3.11.2.

Tinyauth is an authentication and authorization server. Prior to 5.1.0, an unauthenticated remote attacker can send POST /api/user/login requests with 257 distinct nonexistent usernames to fill MaxLoginAttemptRecords and activate a global login lockdown. internal/controller/user_controller.go loginHandler passes each attacker-controlled identifier to internal/service/auth_service.go RecordLoginAttempt, which invokes lockdownMode after the map reaches its cap. IsAccountLocked checks that global state before validating unrelated accounts, causing valid users to receive HTTP 429 until auth.loginTimeout expires, approximately 300 seconds by default. The attack can be repeated, but existing authenticated sessions are not invalidated. This issue is fixed in version 5.1.0.

Tinyauth is an authentication and authorization server. Prior to 5.1.0, Tinyauth exposes a remotely observable timing difference between authentication attempts for existing and nonexistent local usernames. internal/controller/user_controller.go loginHandler and internal/middleware/context_middleware.go basicAuth return quickly after internal/service/auth_service.go reports a missing user, while an existing user causes bcrypt password verification work. Repeated measurements can therefore disclose valid usernames and support targeted credential attacks. This issue is fixed in version 5.1.0.

The Intel SEDI IPM (inter-processor mailbox) driver in drivers/ipm/ipm_sedi.c handles an inbound message interrupt in ipm_event_dispose(). It read the peer-written doorbell register, extracted the payload length with IPC_HEADER_GET_LENGTH(), and passed that length straight to sedi_ipc_read_msg() to copy the message into struct ipm_sedi_context.incoming_data_buf, without checking it against the buffer size. The doorbell length field is 10 bits wide (IPC_HEADER_LENGTH_MASK is 0x03FF), so it can encode up to 1023 bytes, while incoming_data_buf is IPC_DATA_LEN_MAX (128) bytes. The bounds check in the underlying HAL sedi_ipc_read_msg() is a DBG_CHECK that compiles away unless CONFIG_DEBUG is set, so no check remained in a production image. The doorbell register is written by the peer processor on the other side of the IPC link — for the intel_ish_5_* targets, the host CPU's ISH driver, reached through the device's memory-mapped register window. Host-side software with driver-level or raw BAR access can therefore set a length of up to 1023 and cause the interrupt handler to copy far past the destination buffer. The affected path requires an application to have registered an IPM receive callback via ipm_register_callback(), which is the driver's normal mode of use. The result is an out-of-bounds write of up to 895 bytes into static (.bss) memory, performed in interrupt context. The overflow first clobbers the rest of struct ipm_sedi_context — including the k_sem and k_mutex used by the transmit path, whose wait queues contain self-referential list pointers — and then adjacent static data, giving a kernel data-structure corruption and crash primitive. The overflowing bytes are read from registers following the message window, a portion of which are themselves peer-programmable. The fix rejects any doorbell whose encoded length exceeds IPC_DATA_LEN_MAX, logging it and acknowledging the doorbell so the peer is not left waiting.

The experimental USB host stack allocates a per-device configuration-descriptor buffer, udev->cfg_desc, from the dedicated usb_device_heap in usbh_device_set_configuration() (subsys/usb/host/usbh_device.c). On three failure paths — a failed full-length GET_DESCRIPTOR(CONFIGURATION) read, a mismatch between the short and full descriptor reads, and a rejected descriptor in parse_configuration_descriptor() — the buffer was released with k_heap_free() but the pointer was left dangling. The cleanup in usbh_device_free() is guarded only by if (udev->cfg_desc != NULL), so it frees the same block a second time. The path is driven entirely by the attached peripheral: usbh_device_connect() calls usbh_device_init(), which ends in usbh_device_set_configuration(), and on failure usbh_device_connect() calls usbh_device_free(). On v4.4.x this happens during the same enumeration, with no unplug required; on v4.1.0–v4.3.x the second free instead arrives via dev_removed_handler()/dev_connected_handler() in subsys/usb/host/usbh_core.c, so it requires a removal or duplicate-connect event after the failed enumeration — a sequence the attached device fully controls. A malicious or malformed USB device only has to answer the first 9-byte configuration-descriptor request with a well-formed header and then fail any of the three checks, for example by returning a full descriptor whose interface count disagrees with bNumInterfaces, or by answering the second read with different bytes. The result is a double free on usb_device_heap. On builds where lib/heap hardening is active (the current default CONFIG_SYS_HEAP_HARDENING_BASIC), sys_heap_free() detects the already-free chunk and calls k_panic(), giving a deterministic, peripheral-triggered denial of service of the USB host. On builds without that detection — earlier releases, or CONFIG_SYS_HEAP_HARDENING_NONE — the second free manipulates a chunk already on the free list, corrupting the heap's free list so that later allocations can return overlapping or invalid blocks. Exploitation beyond denial of service is bounded by the fact that usb_device_heap is a small dedicated heap (CONFIG_USBH_USB_DEVICE_HEAP, default 1024 bytes) whose only client is this descriptor buffer, and by CONFIG_USB_HOST_STACK being marked experimental and disabled by default. The fix sets udev->cfg_desc = NULL after every k_heap_free(), making the cleanup guard sound.

Tinyauth is an authentication and authorization server. Prior to 5.1.2, Tinyauth compares forwarded hostnames case-sensitively while reverse proxies route equivalent hostnames case-insensitively, allowing an authenticated low-privilege user to bypass per-app access controls with a differently cased hostname. The lookup in internal/service/access_controls_service.go through lookupStaticACLs and GetAccessControls, and the Docker-label fallback in internal/service/docker_service.go through GetLabels, can miss the configured app and return an empty access-control object. internal/controller/proxy_controller.go proxyHandler then treats the empty user, group, OAuth, LDAP, and IP restrictions as permissive and returns an authenticated result for an app that should exclude the user. Unauthenticated users remain subject to login, and global login-time allowlists are not bypassed. This issue is fixed in version 5.1.2.

Ajenti is a Linux & BSD modular server admin panel. Prior to version 2.2.16, any authenticated user can call /api/core/tasks/start to enqueue InstallPlugin, UnInstallPlugin, or UpgradeAll from plugins/plugins/tasks.py without plugin-management authorization. InstallPlugin and UnInstallPlugin construct a pip package specification from unvalidated name and version fields, and the task worker invokes pip while running as root. A low-privileged user can therefore select or manipulate a package installed with root privileges and can install, remove, or upgrade plugins without administrative permission, resulting in root code execution and full host compromise. This issue is fixed in version 2.2.16.

draw.io is a configurable diagramming and whiteboarding application. Prior to version 30.3.8, src/main/java/com/mxgraph/online/Utils.java checks IPv6 Unique Local Addresses in Utils.sanitizeUrl() by comparing the text prefixes fc00:: and fd00::, but the JDK returns the expanded address form, so the fc00::/7 range, including the AWS metadata range fd00:ec2::/32, is not blocked. An unauthenticated request to /embed2.js?fetch= can therefore make src/main/java/com/mxgraph/online/EmbedServlet2.java fetch an IPv6 ULA internal resource and reflect the response to the requester. Utils.validatedAddress() uses the same private-address check for the separate ProxyServlet path, which requires ENABLE_DRAWIO_PROXY=1. The primary /embed2.js path requires no proxy feature flag or DNS rebinding, and it can disclose cloud metadata credentials or data from other IPv6-reachable internal services. This issue is fixed in version 30.3.8.

draw.io is a configurable diagramming and whiteboarding application. Prior to version 30.2.7, the OAuth callback handler in src/main/java/com/mxgraph/online/AbsAuth.java skips comparison of stateToken and cookieToken whenever IS_GAE is false, which affects self-hosted Docker and WAR deployments. An attacker can provide an authorization code for the attacker's cloud-storage identity and induce a victim to visit a callback URL, causing the victim's draw.io session to become authenticated as the attacker identity without a valid state binding. The shared handler affects Google Drive, OneDrive, GitHub, GitLab, and Dropbox integrations. The victim can then unknowingly perform cloud-storage actions under the attacker's identity, causing session integrity loss and misattribution, but the identity binding does not itself grant access to existing victim cloud files. This issue is fixed in version 30.2.7.

draw.io is a configurable diagramming and whiteboarding application. Prior to version 30.2.7, deployments with ENABLE_DRAWIO_PROXY=1 are vulnerable to server-side request forgery because src/main/java/com/mxgraph/online/Utils.java performs the private-address check in Utils.sanitizeUrl() using one DNS resolution, while src/main/java/com/mxgraph/online/ProxyServlet.java later calls URL.openConnection() and performs a second resolution. An attacker-controlled hostname can resolve to a public address during validation and then to a private, link-local, or cloud metadata address when the connection is opened. Successful exploitation can return cloud instance metadata or responses from internal HTTP services through the proxy. This issue is fixed in version 30.2.7.

draw.io is a configurable diagramming and whiteboarding application. Prior to version 30.2.7, src/main/java/com/mxgraph/online/ExportProxyServlet.java uses request.getPathInfo() to build a proxyPath and appends it directly to EXPORT_URL without rejecting dot segments or confirming that the normalized destination remains under the configured export path. An unauthenticated request containing traversal segments can therefore address unintended routes on the internal export server, and the servlet forwards all request headers and the request body to that destination, allowing arbitrary header injection. Depending on the export service configuration, exploitation can expose administration, debugging, health, or configuration endpoints and can permit unintended internal actions. This issue is fixed in version 30.2.7.

draw.io is a configurable diagramming and whiteboarding application. Prior to version 30.2.5, opening or importing a crafted .drawio file can execute attacker-controlled JavaScript in the draw.io origin when selected cells are processed by TextFormatPanel.addFont() in src/main/webapp/js/grapheditor/Format.js. An HTML sibling cell keeps the formatted-label path enabled while an editable=0 plain-text sibling is excluded from the merged selection style but remains in the iteration set. graph.cellRenderer.getLabelValue() returns that plain-text label without HTML encoding, and mxUtils.canConvertHtmlToSvg() parses it as HTML, bypassing the earlier CVE-2026-46642 remediation. Successful exploitation can expose diagram data, browser storage, non-HttpOnly cookies, and same-origin actions available to the victim. This issue is fixed in version 30.2.5.

Fabio is an HTTP(S) and TCP router for deploying applications managed by consul. From 1.6.6 until 1.7.2, the CVE-2025-48865 fix in proxy/http_headers.go uses protectHeaders for a hardcoded set of forwarded headers but omits the operator-configured ClientIPHeader, TLSHeader, and RequestID names. In proxy/http_proxy.go, HTTPProxy.ServeHTTP calls addHeaders to set these trust headers before Go ReverseProxy processes the inbound Connection header, allowing an unauthenticated client to name and remove the configured headers before the request reaches the backend. Deployments that enable the corresponding proxy.header options can therefore lose client-IP, TLS-termination, or request-correlation signals used by backend authorization and auditing; the options are empty by default, and the hardcoded protected forwarded headers are unaffected. This issue is fixed in version 1.7.2.

Fluent Bit is a fast and lightweight logs, metrics, and traces processor for Linux, BSD, macOS, and Windows. From 0.11.0 until 5.0.8, plugins/out_forward/forward.c secure_forward_pong copies the server-controlled PONG[2] reason into the 32-byte stack buffer msg with memcpy without checking its MessagePack type or length. An attacker who controls or can impersonate an out_forward Secure Forward destination configured with Shared_Key or Empty_Shared_Key can send an oversized reason during the first handshake and overwrite stack control data. Protected builds reliably terminate, while builds without a stack canary or with a disclosure can allow remote code execution as the Fluent Bit process user. When the opt-in --supervisor mode is used, fork-only respawns preserve the canary and address layout, allowing repeated crash-or-survive probes to support code execution on a hardened build; ordinary exec-based or service-manager restarts do not preserve that state. This issue is fixed in version 5.0.8.

ntopng is a web-based network traffic monitoring application. Prior to 6.7.260718, scripts/lua/rest/v2/get/system/configurations/list_available_backups.lua and scripts/lua/rest/v2/get/system/configurations/download_backup.lua allow any authenticated non-admin user to list and download system-configuration backups without an administrator check. The download path reaches backup_config.export_backup, and prefs_dump_utils.build_prefs_dump_table includes the ntopng.user.* Redis key space in the backup. A downloaded backup can therefore disclose password hashes for local users and, when configured, API tokens, TOTP secrets, and WebAuthn credential data, enabling account compromise through usable or recoverable credentials. This issue is fixed in version 6.7.260718.

ntopng is a web-based network traffic monitoring application. Prior to 6.7.260717, POST /lua/rest/v2/edit/system/edit_blacklist.lua in scripts/lua/rest/v2/edit/system/edit_blacklist.lua lacks an administrator check and calls lists_utils.editList for any authenticated user. The list_name, list_enabled, url, and list_update parameters allow a non-admin user to redirect threat-intelligence downloads to attacker-controlled content, disable blocklists, or prevent scheduled updates. The changes are persisted through Redis and reloaded without a lower-level authorization guard, undermining the integrity and availability of ntopng's threat-intelligence monitoring. This issue is fixed in version 6.7.260717.

ntopng is a web-based network traffic monitoring application. Prior to 6.7.260717, the vulnerability-scan endpoints scripts/lua/rest/v2/add/host/to_scan.lua and scripts/lua/rest/v2/exec/host/schedule_vulnerability_scan.lua accept the scan_ports parameter without an administrator gate and pass it through validateSingleWord, which permits shell metacharacters. scripts/lua/modules/vulnerability_scan/vs_utils.lua then concatenates scan_ports into an nmap command in nmap_scan_host and executes the command through ntop.execCmd or ntop.execCmdAsync and popen. Any authenticated non-admin user can execute operating-system commands as the ntopng process account when nmap is available. Because the endpoints accept GET requests while ntopng's CSRF validation applies to POST request bodies, an attacker can also trigger the command through a logged-in user's browser without possessing ntopng credentials. This issue is fixed in version 6.7.260717.

Feast is the open source feature store for AI and machine learning. Prior to 0.65.0, .github/workflows/pr_integration_tests.yml uses pull_request_target with the synchronize event and preserves ok-to-test, approved, or lgtm labels across newly pushed commits, allowing a fork contributor to obtain approval for a benign revision and then run changed code from refs/pull/${{ github.event.pull_request.number }}/merge through privileged make targets. The job exposes GCP, AWS, and Snowflake credentials to that code, enabling runner code execution, credential disclosure, and possible access to downstream cloud resources. An external label-removal integration could mitigate the condition, but no repository workflow provided that protection. This issue is fixed in version 0.65.0.

Hatchet is a platform for orchestrating background tasks, AI agents, and durable workflows at scale. Prior to 0.106.1, the WorkerStatus gRPC polling path in pkg/repository/durable_events.go passes caller-supplied durable task, node, and branch identifiers to ListSatisfiedEntries without a tenant filter, allowing an authenticated tenant worker that knows another tenant's durable-task UUID to retrieve matching durable event-log records. The UUIDv4 requirement makes exploitation unlikely, and single-tenant deployments are unaffected in practice. This issue is fixed in version 0.106.1.