CVE Feed

A vulnerability in the packet processing functionality of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to inefficient memory management. An attacker could exploit this vulnerability by sending a high rate of IPv4 or IPv6 traffic through an affected device. This traffic would need to match a configured block action in an access control policy. An exploit could allow the attacker to cause a memory exhaustion condition on the affected device, which would result in a DoS for traffic transiting the device, as well as sluggish performance of the management interface. Once the flood is stopped, performance should return to previous states.

Multiple vulnerabilities in the Media Gateway Control Protocol (MGCP) inspection feature of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerabilities are due to inefficient memory management. An attacker could exploit these vulnerabilities by sending crafted MGCP packets through an affected device. An exploit could allow the attacker to cause memory exhaustion resulting in a restart of an affected device, causing a DoS condition for traffic traversing the device.

A vulnerability in the support tunnel feature of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to access the shell of an affected device even though expert mode is disabled. The vulnerability is due to improper configuration of the support tunnel feature. An attacker could exploit this vulnerability by enabling the support tunnel, setting a key, and deriving the tunnel password. A successful exploit could allow the attacker to run any system command with root access on an affected device.

A vulnerability in the web server of Cisco Umbrella could allow an unauthenticated, remote attacker to perform a carriage return line feed (CRLF) injection attack against a user of an affected service. The vulnerability is due to insufficient validation of user input. An attacker could exploit this vulnerability by persuading a user to access a crafted URL. A successful exploit could allow the attacker to inject arbitrary HTTP headers into valid HTTP responses sent to the browser of the user.

A vulnerability in the Secure Sockets Layer (SSL)/Transport Layer Security (TLS) handler of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to exhaust memory resources on the affected device, leading to a denial of service (DoS) condition. The vulnerability is due to improper resource management for inbound SSL/TLS connections. An attacker could exploit this vulnerability by establishing multiple SSL/TLS connections with specific conditions to the affected device. A successful exploit could allow the attacker to exhaust the memory on the affected device, causing the device to stop accepting new SSL/TLS connections and resulting in a DoS condition for services on the device that process SSL/TLS traffic. Manual intervention is required to recover an affected device.

A vulnerability in the Open Shortest Path First (OSPF) implementation in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a memory leak on an affected device. The vulnerability is due to incorrect processing of certain OSPF packets. An attacker could exploit this vulnerability by sending a series of crafted OSPF packets to be processed by an affected device. A successful exploit could allow the attacker to continuously consume memory on an affected device and eventually cause it to reload, resulting in a denial of service (DoS) condition.

A vulnerability in DNS over IPv6 packet processing for Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the device to unexpectedly reload, resulting in a denial of service (DoS) condition. The vulnerability is due to improper length validation of a field in an IPv6 DNS packet. An attacker could exploit this vulnerability by sending a crafted DNS query over IPv6, which traverses the affected device. An exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. This vulnerability is specific to DNS over IPv6 traffic only.

A vulnerability in the VPN System Logging functionality for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a memory leak that can deplete system memory over time, which can cause unexpected system behaviors or device crashes. The vulnerability is due to the system memory not being properly freed for a VPN System Logging event generated when a VPN session is created or deleted. An attacker could exploit this vulnerability by repeatedly creating or deleting a VPN tunnel connection, which could leak a small amount of system memory for each logging event. A successful exploit could allow the attacker to cause system memory depletion, which can lead to a systemwide denial of service (DoS) condition. The attacker does not have any control of whether VPN System Logging is configured or not on the device, but it is enabled by default.

A vulnerability in how Cisco Firepower Threat Defense (FTD) Software handles session timeouts for management connections could allow an unauthenticated, remote attacker to cause a buildup of remote management connections to an affected device, which could result in a denial of service (DoS) condition. The vulnerability exists because the default session timeout period for specific to-the-box remote management connections is too long. An attacker could exploit this vulnerability by sending a large and sustained number of crafted remote management connections to an affected device, resulting in a buildup of those connections over time. A successful exploit could allow the attacker to cause the remote management interface or Cisco Firepower Device Manager (FDM) to stop responding and cause other management functions to go offline, resulting in a DoS condition. The user traffic that is flowing through the device would not be affected, and the DoS condition would be isolated to remote management only.

A vulnerability in the web services interface of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to conduct directory traversal attacks and obtain read and delete access to sensitive files on a targeted system. The vulnerability is due to a lack of proper input validation of the HTTP URL. An attacker could exploit this vulnerability by sending a crafted HTTP request containing directory traversal character sequences. An exploit could allow the attacker to view or delete arbitrary files on the targeted system. When the device is reloaded after exploitation of this vulnerability, any files that were deleted are restored. The attacker can only view and delete files within the web services file system. This file system is enabled when the affected device is configured with either WebVPN or AnyConnect features. This vulnerability can not be used to obtain access to ASA or FTD system files or underlying operating system (OS) files. Reloading the affected device will restore all files within the web services file system.

A vulnerability in the ARP packet processing of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Security Appliances could allow an unauthenticated, adjacent attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition on an affected device. The vulnerability is due to incorrect processing of ARP packets received by the management interface of an affected device. An attacker could exploit this vulnerability by sending a series of unicast ARP packets in a short timeframe that would reach the management interface of an affected device. A successful exploit could allow the attacker to consume resources on an affected device, which would prevent the device from sending internal system keepalives and eventually cause the device to reload, resulting in a denial of service (DoS) condition.

A vulnerability in role-based access control of Cisco Integrated Management Controller (IMC) Supervisor, Cisco UCS Director, and Cisco UCS Director Express for Big Data could allow a read-only authenticated, remote attacker to disable user accounts on an affected system. The vulnerability is due to incorrect allocation of the enable/disable action button under the role-based access control code on an affected system. An attacker could exploit this vulnerability by authenticating as a read-only user and then updating the roles of other users to disable them. A successful exploit could allow the attacker to disable users, including administrative users.

Multiple vulnerabilities in Cisco Firepower Management Center (FMC) Software and Cisco Firepower User Agent Software could allow an attacker to access a sensitive part of an affected system with a high-privileged account. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple Cisco products are affected by a vulnerability in the Snort detection engine that could allow an unauthenticated, remote attacker to bypass the configured file policies on an affected system. The vulnerability is due to errors in how the Snort detection engine handles specific HTTP responses. An attacker could exploit this vulnerability by sending crafted HTTP packets that would flow through an affected system. A successful exploit could allow the attacker to bypass the configured file policies and deliver a malicious payload to the protected network.

A vulnerability in the web UI of Cisco Firepower Management Center (FMC) Software could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface of the FMC Software. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or to access sensitive, browser-based information.

A vulnerability in the application policy configuration of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to gain unauthorized read access to sensitive data on an affected device. The vulnerability is due to insufficient application identification. An attacker could exploit this vulnerability by sending crafted traffic to an affected device. A successful exploit could allow the attacker to gain unauthorized read access to sensitive data.

A vulnerability in the web interface of Cisco Firepower Management Center (FMC) Software could allow an unauthenticated, remote attacker to redirect a user to a malicious web page. The vulnerability is due to improper input validation of HTTP request parameters. An attacker could exploit this vulnerability by intercepting and modifying an HTTP request from a user. A successful exploit could allow the attacker to redirect the user to a specific malicious web page.

A vulnerability in the XML parser code of Cisco Firepower Device Manager On-Box software could allow an authenticated, remote attacker to cause an affected system to become unstable or reload. The vulnerability is due to insufficient hardening of the XML parser configuration. An attacker could exploit this vulnerability in multiple ways using a malicious file: An attacker with administrative privileges could upload a malicious XML file on the system and cause the XML code to parse the malicious file. An attacker with Clientless Secure Sockets Layer (SSL) VPN access could exploit this vulnerability by sending a crafted XML file. A successful exploit would allow the attacker to crash the XML parser process, which could cause system instability, memory exhaustion, and in some cases lead to a reload of the affected system.

A vulnerability in Cisco Firepower Device Manager (FDM) On-Box software could allow an authenticated, remote attacker to overwrite arbitrary files on the underlying operating system of an affected device. The vulnerability is due to improper input validation. An attacker could exploit this vulnerability by uploading a malicious file to an affected device. A successful exploit could allow the attacker to overwrite arbitrary files on as well as modify the underlying operating system of an affected device.

A vulnerability in the Kerberos authentication feature of Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to impersonate the Kerberos key distribution center (KDC) and bypass authentication on an affected device that is configured to perform Kerberos authentication for VPN or local device access. The vulnerability is due to insufficient identity verification of the KDC when a successful authentication response is received. An attacker could exploit this vulnerability by spoofing the KDC server response to the ASA device. This malicious response would not have been authenticated by the KDC. A successful attack could allow an attacker to bypass Kerberos authentication.

A vulnerability in the generic routing encapsulation (GRE) tunnel decapsulation feature of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a memory handling error when GRE over IPv6 traffic is processed. An attacker could exploit this vulnerability by sending crafted GRE over IPv6 packets with either IPv4 or IPv6 payload through an affected device. A successful exploit could allow the attacker to cause the device to crash, resulting in a DoS condition.

Multiple vulnerabilities in the web-based GUI of Cisco AsyncOS Software for Cisco Content Security Management Appliance (SMA) could allow an unauthenticated, remote attacker to redirect a user to a malicious web page. The vulnerabilities are due to improper input validation of the parameters of an HTTP request. An attacker could exploit these vulnerabilities by intercepting an HTTP request and modifying it to redirect a user to a specific malicious URL. A successful exploit could allow the attacker to redirect a user to a malicious web page or to obtain sensitive browser-based information. This type of attack is commonly referred to as an open redirect attack and is used in phishing attacks to get users to unknowingly visit malicious sites.

A vulnerability in the management access list configuration of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured management interface access list on an affected system. The vulnerability is due to the configuration of different management access lists, with ports allowed in one access list and denied in another. An attacker could exploit this vulnerability by sending crafted remote management traffic to the local IP address of an affected system. A successful exploit could allow the attacker to bypass the configured management access list policies, and traffic to the management interface would not be properly denied.

There is a buffer overwrite vulnerability in the Quram qmg library of Samsung's Android OS versions O(8.x), P(9.0) and Q(10.0). An unauthenticated, unauthorized attacker sending a specially crafted MMS to a vulnerable phone can trigger a heap-based buffer overflow in the Quram image codec leading to an arbitrary remote code execution (RCE) without any user interaction. The Samsung ID is SVE-2020-16747.

An issue was discovered in OpenStack Keystone before 15.0.1, and 16.0.0. Any user authenticated within a limited scope (trust/oauth/application credential) can create an EC2 credential with an escalated permission, such as obtaining admin while the user is on a limited viewer role. This potentially allows a malicious user to act as the admin on a project another user has the admin role on, which can effectively grant that user global admin privileges.

An issue was discovered in OpenStack Keystone before 15.0.1, and 16.0.0. Any authenticated user can create an EC2 credential for themselves for a project that they have a specified role on, and then perform an update to the credential user and project, allowing them to masquerade as another user. This potentially allows a malicious user to act as the admin on a project another user has the admin role on, which can effectively grant that user global admin privileges.

An issue was discovered in OpenStack Keystone before 15.0.1, and 16.0.0. The list of roles provided for an OAuth1 access token is silently ignored. Thus, when an access token is used to request a keystone token, the keystone token contains every role assignment the creator had for the project. This results in the provided keystone token having more role assignments than the creator intended, possibly giving unintended escalated access.

Improper serialization of internal state in the authorization subsystem in MongoDB Server's authorization subsystem permits a user with valid credentials to bypass IP whitelisting protection mechanisms following administrative action. This issue affects MongoDB Server v4.2 versions prior to 4.2.3; MongoDB Server v4.0 versions prior to 4.0.15; MongoDB Server v4.3 versions prior to 4.3.3and MongoDB Server v3.6 versions prior to 3.6.18.

IBM Business Process Manager 8.0, 8.5, and 8.6 and IBM Business Automation Workflow 18.0 and 19.0 could allow a remote attacker to bypass security restrictions, caused by the failure to perform insufficient authorization checks. IBM X-Force ID: 181126.

IBM WebSphere Application Liberty 19.0.0.5 through 20.0.0.4 could allow an authenticated user using openidconnect to spoof another users identify. IBM X-Force ID: 180084.

IBM InfoSphere Information Server 11.3, 11.5, and 11.7 is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM X-Force ID: 179265.

IBM Maximo Anywhere 7.6.2.0, 7.6.2.1, 7.6.3.0, and 7.6.3.1 does not have device jailbreak detection which could result in an attacker gaining sensitive information about the device. IBM X-Force ID: 160199.

A flawed protocol design in the Ledger Monero app before 1.5.1 for Ledger Nano and Ledger S devices allows a local attacker to extract the master spending key by sending crafted messages to this app selected on a PIN-entered Ledger connected to a host PC.

Dext5.ocx ActiveX 5.0.0.116 and eariler versions contain a vulnerability, which could allow remote attacker to download and execute remote arbitrary file by setting the arguments to the activex method. This can be leveraged for code execution.

Dext5.ocx ActiveX 5.0.0.116 and eariler versions contain a vulnerability, which could allow remote attacker to download arbitrary file by setting the arguments to the activex method. This can be leveraged for code execution.

Tobesoft Xplatform 9.2.2.250 and earlier version have an arbitrary code execution vulnerability by using method supported by Xplatform ActiveX Control. It allows attacker to cause remote code execution.

Tobesoft Nexacro v2019.9.25.1 and earlier version have an arbitrary code execution vulnerability by using method supported by Nexacro14 ActiveX Control. It allows attacker to cause remote code execution.

Jenkins SCM Filter Jervis Plugin 0.2.1 and earlier does not configure its YAML parser to prevent the instantiation of arbitrary types, resulting in a remote code execution vulnerability.

A missing permission check in Jenkins Amazon EC2 Plugin 1.50.1 and earlier in form-related methods allowed users with Overall/Read access to enumerate credentials ID of credentials stored in Jenkins.

Jenkins Amazon EC2 Plugin 1.50.1 and earlier unconditionally accepts self-signed certificates and does not perform hostname validation, enabling man-in-the-middle attacks.

Jenkins Amazon EC2 Plugin 1.50.1 and earlier does not validate SSH host keys when connecting agents, enabling man-in-the-middle attacks.

A cross-site request forgery vulnerability in Jenkins Amazon EC2 Plugin 1.50.1 and earlier allows attackers to provision instances.

Jenkins Copy Artifact Plugin 1.43.1 and earlier performs improper permission checks, allowing attackers to copy artifacts from jobs they have no permission to access.

A cross-site request forgery vulnerability in Jenkins CVS Plugin 2.15 and earlier allows attackers to create and manipulate tags, and to connect to an attacker-specified URL.

Tobesoft XPlatform v9.1, 9.2.0, 9.2.1 and 9.2.2 have a vulnerability that can load unauthorized DLL files. It allows attacker to cause remote code execution.

An exploitable out-of-bounds write vulnerability exists in the store_data_buffer function of the igcore19d.dll library of Accusoft ImageGear 19.5.0. A specially crafted PNG file can cause an out-of-bounds write, resulting in a remote code execution. An attacker needs to provide a malformed file to the victim to trigger the vulnerability.

An exploitable out-of-bounds write vulnerability exists in the igcore19d.dll ICO icoread parser of the Accusoft ImageGear 19.5.0 library. A specially crafted ICO file can cause an out-of-bounds write, resulting in a remote code execution. An attacker needs to provide a malformed file to the victim to trigger the vulnerability.

An exploitable out-of-bounds write vulnerability exists in the ico_read function of the igcore19d.dll library of Accusoft ImageGear 19.6.0. A specially crafted ICO file can cause an out-of-bounds write, resulting in a remote code execution. An attacker needs to provide a malformed file to the victim to trigger the vulnerability.

An exploitable code execution vulnerability exists in the TIFF fillinraster function of the igcore19d.dll library of Accusoft ImageGear 19.4, 19.5 and 19.6. A specially crafted TIFF file can cause an out-of-bounds write, resulting in remote code execution. An attacker can provide a malicious file to trigger this vulnerability.

"If port encryption is not enabled on the Domino Server, HCL Nomad on Android and iOS Platforms will communicate in clear text and does not currently have a user interface option to change the setting to request an encrypted communication channel with the Domino server. This can potentially expose sensitive information including but not limited to server names, user IDs and document content."