CVE Feed

A local, authenticated user with shell can view sensitive configuration information via the ev.ops configuration file. This issue affects all versions of Junos OS Evolved prior to 19.2R1.

A local, authenticated user with shell can obtain the hashed values of login passwords and shared secrets via the EvoSharedObjStore. This issue affects all versions of Junos OS Evolved prior to 19.1R1.

A local, authenticated user with shell can obtain the hashed values of login passwords via configd traces. This issue affects all versions of Junos OS Evolved prior to 19.3R1.

A local, authenticated user with shell can obtain the hashed values of login passwords via configd streamer log. This issue affects all versions of Junos OS Evolved prior to 19.3R1.

A privilege escalation vulnerability in Juniper Networks QFX10K Series, EX9200 Series, MX Series, and PTX Series with Next-Generation Routing Engine (NG-RE), allows a local authenticated high privileged user to access the underlying WRL host. This issue only affects QFX10K Series with NG-RE, EX9200 Series with NG-RE, MX Series with NG-RE and PTX Series with NG-RE; which uses vmhost. This issue affects Juniper Networks Junos OS: 16.1 versions prior to 16.1R7-S6; 16.2 versions prior to 16.2R2-S11; 17.1 versions prior to 17.1R2-S11, 17.1R3; 17.2 versions prior to 17.2R1-S9, 17.2R3-S3; 17.3 versions prior to 17.3R2-S5, 17.3R3-S7; 17.4 versions prior to 17.4R2-S7, 17.4R3; 18.1 versions prior to 18.1R3-S4; 18.2 versions prior to 18.2R3; 18.2X75 versions prior to 18.2X75-D50; 18.3 versions prior to 18.3R2; 18.4 versions prior to 18.4R2. To identify whether the device has NG-RE with vmhost, customer can run the following command: > show vmhost status Compute cluster: rainier-re-cc Compute Node: rainier-re-cn, Online If the "show vmhost status" is not supported, then the device does not have NG-RE with vmhost.

On Juniper Networks EX and QFX Series, an authentication bypass vulnerability may allow a user connected to the console port to login as root without any password. This issue might only occur in certain scenarios: • At the first reboot after performing device factory reset using the command “request system zeroize”; or • A temporary moment during the first reboot after the software upgrade when the device configured in Virtual Chassis mode. This issue affects Juniper Networks Junos OS on EX and QFX Series: 14.1X53 versions prior to 14.1X53-D53; 15.1 versions prior to 15.1R7-S4; 15.1X53 versions prior to 15.1X53-D593; 16.1 versions prior to 16.1R7-S4; 17.1 versions prior to 17.1R2-S11, 17.1R3-S1; 17.2 versions prior to 17.2R3-S3; 17.3 versions prior to 17.3R2-S5, 17.3R3-S6; 17.4 versions prior to 17.4R2-S9, 17.4R3; 18.1 versions prior to 18.1R3-S8; 18.2 versions prior to 18.2R2; 18.3 versions prior to 18.3R1-S7, 18.3R2. This issue does not affect Juniper Networks Junos OS 12.3.

This issue occurs on Juniper Networks Junos OS devices which do not support Advanced Forwarding Interface (AFI) / Advanced Forwarding Toolkit (AFT). Devices using AFI and AFT are not exploitable to this issue. An improper initialization of memory in the packet forwarding architecture in Juniper Networks Junos OS non-AFI/AFT platforms which may lead to a Denial of Service (DoS) vulnerability being exploited when a genuine packet is received and inspected by non-AFT/AFI sFlow and when the device is also configured with firewall policers. This first genuine packet received and inspected by sampled flow (sFlow) through a specific firewall policer will cause the device to reboot. After the reboot has completed, if the device receives and sFlow inspects another genuine packet seen through a specific firewall policer, the device will generate a core file and reboot. Continued inspection of these genuine packets will create an extended Denial of Service (DoS) condition. Depending on the method for service restoration, e.g. hard boot or soft reboot, a core file may or may not be generated the next time the packet is received and inspected by sFlow. This issue affects: Juniper Networks Junos OS 17.4 versions prior to 17.4R2-S9, 17.4R3 on PTX1000 and PTX10000 Series, QFX10000 Series; 18.1 versions prior to 18.1R3-S9 on PTX1000 and PTX10000 Series, QFX10000 Series; 18.2X75 versions prior to 18.2X75-D12, 18.2X75-D30 on PTX1000 and PTX10000 Series, QFX10000 Series; 18.2 versions prior to 18.2R3 on PTX1000 and PTX10000 Series, QFX10000 Series; 18.3 versions prior to 18.3R3 on PTX1000 and PTX10000 Series, QFX10000 Series. This issue is not applicable to Junos OS versions before 17.4R1. This issue is not applicable to Junos OS Evolved or Junos OS with Advanced Forwarding Toolkit (AFT) forwarding implementations which use a different implementation of sFlow. The following example information is unrelated to this issue and is provided solely to assist you with determining if you have AFT or not. Example: A Junos OS device which supports the use of EVPN signaled VPWS with Flexible Cross Connect uses the AFT implementation. Since this configuration requires support and use of the AFT implementation to support this configuration, the device is not vulnerable to this issue as the sFlow implementation is different using the AFT architecture. For further details about AFT visit the AFI / AFT are in the links below. If you are uncertain if you use the AFI/AFT implementation or not, there are configuration examples in the links below which you may use to determine if you are vulnerable to this issue or not. If the commands work, you are. If not, you are not. You may also use the Feature Explorer to determine if AFI/AFT is supported or not. If you are still uncertain, please contact your support resources.

Due to insufficient server-side login attempt limit enforcement, a vulnerability in the SSH login service of Juniper Networks Juniper Advanced Threat Prevention (JATP) Series and Virtual JATP (vJATP) devices allows an unauthenticated, remote attacker to perform multiple login attempts in excess of the configured login attempt limit. Successful exploitation will allow the attacker to perform brute-force password attacks on the SSH service. This issue affects: Juniper Networks JATP and vJATP versions prior to 5.0.6.0.

The factory configuration for vMX installations, as shipped, includes default credentials for the root account. Without proper modification of these default credentials by the administrator, an attacker could exploit these credentials and access the vMX instance without authorization. This issue affects Juniper Networks Junos OS: 17.1 versions prior to 17.1R2-S11, 17.1R3-S2 on vMX; 17.2 versions prior to 17.2R3-S3 on vMX; 17.3 versions prior to 17.3R2-S5, 17.3R3-S7 on vMX; 17.4 versions prior to 17.4R2-S9, 17.4R3 on vMX; 18.1 versions prior to 18.1R3-S9 on vMX; 18.2 versions prior to 18.2R2-S7, 18.2R3-S3 on vMX; 18.2X75 versions prior to 18.2X75-D420, 18.2X75-D60 on vMX; 18.3 versions prior to 18.3R1-S7, 18.3R2-S3, 18.3R3-S1 on vMX; 18.4 versions prior to 18.4R1-S5, 18.4R2-S3, 18.4R3 on vMX; 19.1 versions prior to 19.1R1-S4, 19.1R2, 19.1R3 on vMX; 19.2 versions prior to 19.2R1-S3, 19.2R2 on vMX; 19.3 versions prior to 19.3R1-S1, 19.3R2 on vMX.

A Use of Hard-coded Credentials vulnerability exists in the NFX250 Series for the vSRX Virtual Network Function (VNF) instance, which allows an attacker to take control of the vSRX VNF instance if they have the ability to access an administrative service (e.g. SSH) on the VNF, either locally, or through the network. This issue only affects the NFX250 Series vSRX VNF. No other products or platforms are affected. This issue is only applicable to environments where the vSRX VNF root password has not been configured. This issue affects the Juniper Networks NFX250 Network Services Platform vSRX VNF instance on versions prior to 19.2R1.

A vulnerability in the BGP FlowSpec implementation may cause a Juniper Networks Junos OS device to terminate an established BGP session upon receiving a specific BGP FlowSpec advertisement. The BGP NOTIFICATION message that terminates an established BGP session is sent toward the peer device that originally sent the specific BGP FlowSpec advertisement. This specific BGP FlowSpec advertisement received from a BGP peer might get propagated from a Junos OS device running the fixed release to another device that is vulnerable causing BGP session termination downstream. This issue affects IPv4 and IPv6 BGP FlowSpec deployment. This issue affects Juniper Networks Junos OS: 12.3; 12.3X48 on SRX Series; 14.1X53 on EX and QFX Series; 15.1 versions prior to 15.1R7-S5; 15.1F versions prior to 15.1F6-S13; 15.1X49 versions prior to 15.1X49-D180 on SRX Series; 15.1X53 versions prior to 15.1X53-D238 on QFX5200/QFX5110; 15.1X53 versions prior to 15.1X53-D497 on NFX Series; 15.1X53 versions prior to 15.1X53-D592 on EX2300/EX3400; 16.1 versions prior to 16.1R7-S7; 17.1 versions prior to 17.1R2-S12, 17.1R3; 17.2 versions prior to 17.2R2-S7, 17.2R3; 17.2X75 versions prior to 17.2X75-D102, 17.2X75-D110, 17.2X75-D44; 17.3 versions prior to 17.3R2-S5, 17.3R3-S5; 17.4 versions prior to 17.4R1-S8, 17.4R2; 18.1 versions prior to 18.1R2-S4, 18.1R3; 18.2X75 versions prior to 18.2X75-D20.

A format string vulnerability in the Varrcvr daemon of PAN-OS on PA-7000 Series devices with a Log Forwarding Card (LFC) allows remote attackers to crash the daemon creating a denial of service condition or potentially execute code with root privileges. This issue affects Palo Alto Networks PAN-OS 9.0 versions before 9.0.7; PAN-OS 9.1 versions before 9.1.2 on PA-7000 Series devices with an LFC installed and configured. This issue requires WildFire services to be configured and enabled. This issue does not affect PAN-OS 8.1 and earlier releases. This issue does not affect any other PA Series firewalls.

An insecure temporary file vulnerability in Palo Alto Networks Traps allows a local authenticated Windows user to escalate privileges or overwrite system files. This issue affects Palo Alto Networks Traps 5.0 versions before 5.0.8; 6.1 versions before 6.1.4 on Windows. This issue does not affect Cortex XDR 7.0. This issue does not affect Traps for Linux or MacOS.

A stack-based buffer overflow vulnerability in the management server component of PAN-OS allows an authenticated user to upload a corrupted PAN-OS configuration and potentially execute code with root privileges. This issue affects Palo Alto Networks PAN-OS 8.1 versions before 8.1.13; 9.0 versions before 9.0.7. This issue does not affect PAN-OS 7.1.

An incorrect privilege assignment vulnerability when writing application-specific files in the Palo Alto Networks Global Protect Agent for Linux on ARM platform allows a local authenticated user to gain root privileges on the system. This issue affects Palo Alto Networks Global Protect Agent for Linux 5.0 versions before 5.0.8; 5.1 versions before 5.1.1.

An unquoted search path vulnerability in the Windows release of Global Protect Agent allows an authenticated local user with file creation privileges on the root of the OS disk (C:\) or to Program Files directory to gain system privileges. This issue affects Palo Alto Networks GlobalProtect Agent 5.0 versions before 5.0.5; 4.1 versions before 4.1.13 on Windows;

An information exposure vulnerability in the logging component of Palo Alto Networks Global Protect Agent allows a local authenticated user to read VPN cookie information when the troubleshooting logging level is set to "Dump". This issue affects Palo Alto Networks Global Protect Agent 5.0 versions prior to 5.0.9; 5.1 versions prior to 5.1.1.

Improper input validation vulnerability in Secdo allows an authenticated local user with 'create folders or append data' access to the root of the OS disk (C:\) to cause a system crash on every login. This issue affects all versions Secdo for Windows.

Incorrect Default Permissions on C:\Programdata\Secdo\Logs folder in Secdo allows local authenticated users to overwrite system files and gain escalated privileges. This issue affects all versions Secdo for Windows.

Secdo tries to execute a script at a hardcoded path if present, which allows a local authenticated user with 'create folders or append data' access to the root of the OS disk (C:\) to gain system privileges if the path does not already exist or is writable. This issue affects all versions of Secdo for Windows.

TechSupport files generated on Palo Alto Networks VM Series firewalls for Microsoft Azure platform configured with high availability (HA) inadvertently collect Azure dashboard service account credentials. These credentials are equivalent to the credentials associated with the Contributor role in Azure. A user with the credentials will be able to manage all the Azure resources in the subscription except for granting access to other resources. These credentials do not allow login access to the VMs themselves. This issue affects VM Series Plugin versions before 1.0.9 for PAN-OS 9.0. This issue does not affect VM Series in non-HA configurations or on other cloud platforms. It does not affect hardware firewall appliances. Since becoming aware of the issue, Palo Alto Networks has safely deleted all the tech support files with the credentials. We now filter and remove these credentials from all TechSupport files sent to us. The TechSupport files uploaded to Palo Alto Networks systems were only accessible by authorized personnel with valid Palo Alto Networks credentials. We do not have any evidence of malicious access or use of these credentials.

A buffer overflow vulnerability in Code::Blocks 17.12 allows an attacker to execute arbitrary code via a crafted project file.

GitLab EE/CE 10.8 to 12.9 is leaking metadata and comments on vulnerabilities to unauthorized users on the vulnerability feedback page.

GitLab EE/CE 8.17 to 12.9 is vulnerable to information leakage when querying a merge request widget.

GitLab EE/CE 8.5 to 12.9 is vulnerable to a an path traversal when moving an issue between projects.

GitLab EE/CE 8.11 to 12.9 is leaking information on Issues opened in a public project and then moved to a private project through Web-UI and GraphQL API.

GitLab EE/CE 11.10 to 12.9 is leaking information on restricted CI pipelines metrics to unauthorized users.

GitLab EE/CE 8.0.rc1 to 12.9 is vulnerable to a blind SSRF in the FogBugz integration.

GitLab EE/CE 9.0 to 12.9 allows a maintainer to modify other maintainers' pipeline trigger descriptions within the same project.

An issue was discovered on Samsung mobile devices with N(7.0) (Qualcomm models using MSM8996 chipsets) software. A device can be rooted with a custom image to execute arbitrary scripts in the INIT context. The Samsung ID is SVE-2018-11940 (September 2018).

An issue was discovered on Samsung mobile devices with M(6.0), N(7.x) and O(8.x) except exynos9610/9820 in all Platforms, M(6.0) except MSM8909 SC77xx/9830 exynos3470/5420, N(7.0) except MSM8939, N(7.1) except MSM8996 SDM6xx/M6737T software. There is an integer underflow with a resultant buffer overflow in eCryptFS. The Samsung ID is SVE-2017-11857 (September 2018).

An issue was discovered on Samsung mobile devices with N(7.x), O(8.x), and P(9.0) software. There is Clipboard access in the lockscreen state via a physical keyboard. The Samsung ID is SVE-2018-12684 (October 2018).

An issue was discovered on Samsung mobile devices with O(8.x) software. The Smartwatch displays Secure Folder Notification content. The Samsung ID is SVE-2018-12458 (September 2018).

An issue was discovered on Samsung mobile devices with N(7.x) O(8.x, and P(9.0) (Exynos chipsets) software. There is a stack-based buffer overflow in the Shannon Baseband. The Samsung ID is SVE-2018-12757 (September 2018).

An issue was discovered on Samsung mobile devices with N(7.0), O(8.0) (exynos7420 or Exynos 8890/8996 chipsets) software. Cache attacks can occur against the Keymaster AES-GCM implementation because T-Tables are used; the Cryptography Extension (CE) is not used. The Samsung ID is SVE-2018-12761 (September 2018).

An issue was discovered on Samsung mobile devices with N(7.x) and O(8.X) (Exynos chipsets) software. There is incorrect usage of shared memory in the vaultkeeper Trustlet, leading to arbitrary code execution. The Samsung ID is SVE-2018-12855 (October 2018).

An issue was discovered on Samsung mobile devices with N(7.x) and O(8.x) software. There is Clipboard content visibility in the locked state via the emergency contact picker. The Samsung ID is SVE-2018-11806 (September 2018).

An issue was discovered on Samsung mobile devices with N(7.x) and O(8.x) (Exynos chipsets) software. There is an invalid free in the fingerprint Trustlet, leading to arbitrary code execution. The Samsung ID is SVE-2018-12853 (October 2018).

An issue was discovered on Samsung mobile devices with N(7.x) and O(8.X) (Exynos chipsets) software. There is a Buffer overflow in the esecomm Trustlet, leading to arbitrary code execution. The Samsung ID is SVE-2018-12852 (October 2018).

Fixed in v1.5.1, Argo version v1.5.0 was vulnerable to a user-enumeration vulnerability which allowed attackers to determine the usernames of valid (non-SSO) accounts because /api/v1/session returned 401 for an existing username and 404 otherwise.

An issue was discovered on Samsung mobile devices with N(7.x) and O(8.x) software. There is a Keyboard learned words leak in the locked state via the emergency contact picker. The Samsung IDs are SVE-2018-11989, SVE-2018-11990 (September 2018).

An issue was discovered on Samsung mobile devices with N(7.x) and O(8.X) (Exynos chipsets) software. There is an arbitrary memory write in a Trustlet because a secure driver allows access to sensitive APIs. The Samsung ID is SVE-2018-12881 (November 2018).

An issue was discovered on Samsung mobile devices with O(8.x) software. There is a Notification leak on a locked device in Standalone Dex mode. The Samsung ID is SVE-2018-12925 (November 2018).

An issue was discovered on Samsung mobile devices with N(7.1) and O(8.x) software. A fake charger can execute critical functions in the locked state. The Samsung ID is SVE-2016-6341 (August 2018).

An issue was discovered on XIAOMI XIAOAI speaker Pro LX06 1.52.4. Attackers can get root shell by accessing the UART interface and then they can (i) read Wi-Fi SSID or password, (ii) read the dialogue text files between users and XIAOMI XIAOAI speaker Pro LX06, (iii) use Text-To-Speech tools pretend XIAOMI speakers' voice achieve social engineering attacks, (iv) eavesdrop on users and record what XIAOMI XIAOAI speaker Pro LX06 hears, (v) modify system files, (vi) use commands to send any IR code through IR emitter on XIAOMI XIAOAI Speaker Pro LX06, (vii) stop voice assistant service, (viii) enable the XIAOMI XIAOAI Speaker Pro’ SSH or TELNET service as a backdoor, (IX) tamper with the router configuration of the router in the local area networks.

An issue was discovered on Samsung mobile devices with N(7.x) and O(8.x) software. When biometric authentication is disabled, an attacker can view Streams content (e.g., a Gallery slideshow) of a locked Secure Folder via a connection to an external device. The Samsung ID is SVE-2018-11766 (August 2018).

An issue was discovered on Samsung mobile devices with M(6.0), N(7.x), and O(8.x) (Exynos chipsets) software. Keymaster has an architectural problem because tlApi in TEE is not properly protected. The Samsung ID is SVE-2018-11792 (August 2018).

An issue was discovered on Samsung mobile devices with N(7.x) and O(8.x) software. There is an array overflow in a driver's input booster. The Samsung ID is SVE-2017-11816 (August 2018).

An issue was discovered on Samsung mobile devices with M(6.0), N(7.x), and O(8.x) software. There is an integer underflow in eCryptFS because of a missing size check. The Samsung ID is SVE-2017-11855 (August 2018).

An issue was discovered on XIAOMI XIAOAI speaker Pro LX06 1.58.10. Attackers can activate the failsafe mode during the boot process, and use the mi_console command cascaded by the SN code shown on the product to get the root shell password, and then the attacker can (i) read Wi-Fi SSID or password, (ii) read the dialogue text files between users and XIAOMI XIAOAI speaker Pro LX06, (iii) use Text-To-Speech tools pretend XIAOMI speakers' voice achieve social engineering attacks, (iv) eavesdrop on users and record what XIAOMI XIAOAI speaker Pro LX06 hears, (v) modify system files, (vi) use commands to send any IR code through IR emitter on XIAOMI XIAOAI Speaker Pro (LX06), (vii) stop voice assistant service, (viii) enable the XIAOMI XIAOAI Speaker Pro’s SSH or TELNET service as a backdoor, (IX) tamper with the router configuration of the router in the local area networks.