CVE Feed

DVR firmware in TAT-76 and TAT-77 series of products, provided by TONNET do not properly verify patch files. Attackers can inject a specific command into a patch file and gain access to the system.

DVR firmware in TAT-76 and TAT-77 series of products, provided by TONNET, contain misconfigured authentication mechanism. Attackers can crack the default password and gain access to the system.

DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2017-1000020. Reason: This candidate is a reservation duplicate of CVE-2017-1000020. Notes: All CVE users should reference CVE-2017-1000020 instead of this candidate. All references and descriptions in this candidate have been removed to prevent accidental usage

Parts of the Puppet Enterprise Console 3.x were found to be susceptible to clickjacking and CSRF (Cross-Site Request Forgery) attacks. This would allow an attacker to redirect user input to an untrusted site or hijack a user session.

hostapd before 2.6, in EAP mode, makes calls to the rand() and random() standard library functions without any preceding srand() or srandom() call, which results in inappropriate use of deterministic values. This was fixed in conjunction with CVE-2016-10743.

In Moxa ioLogik 2500 series firmware, Version 3.0 or lower, and IOxpress configuration utility, Version 2.3.0 or lower, sensitive information is stored in configuration files without encryption, which may allow an attacker to access an administrative account.

OnCommand Cloud Manager versions prior to 3.8.0 are susceptible to arbitrary code execution by remote attackers.

NetApp FAS 8300/8700 and AFF A400 Baseboard Management Controller (BMC) firmware versions 13.x prior to 13.1P1 were shipped with a default account enabled that could allow unauthorized arbitrary command execution via local access.

A vulnerability in the CLI of Cisco FXOS Software could allow an authenticated, local attacker to read or write arbitrary files on the underlying operating system (OS). The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by including crafted arguments to a specific CLI command. A successful exploit could allow the attacker to read or write to arbitrary files on the underlying OS.

A vulnerability in the CLI of Cisco FXOS Software and Cisco UCS Manager Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS). The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by including crafted arguments to specific commands. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS with the privileges of the currently logged-in user for all affected platforms excluding Cisco UCS 6400 Series Fabric Interconnects. On Cisco UCS 6400 Series Fabric Interconnects, the injected commands are executed with root privileges.

A vulnerability in the Secure Login Enhancements capability of Cisco Nexus 1000V Switch for VMware vSphere could allow an unauthenticated, remote attacker to cause an affected Nexus 1000V Virtual Supervisor Module (VSM) to become inaccessible to users through the CLI. The vulnerability is due to improper resource allocation during failed CLI login attempts when login parameters that are part of the Secure Login Enhancements capability are configured on an affected device. An attacker could exploit this vulnerability by performing a high amount of login attempts against the affected device. A successful exploit could cause the affected device to become inaccessible to other users, resulting in a denial of service (DoS) condition requiring a manual power cycle of the VSM to recover.

A vulnerability in the CLI of Cisco FXOS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying Linux operating system with a privilege level of root on an affected device. The vulnerability is due to insufficient validation of arguments passed to a specific CLI command on the affected device. An attacker could exploit this vulnerability by including malicious input as the argument of an affected command. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system with root privileges. An attacker would need valid administrator credentials to exploit this vulnerability.

A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause an NX-API system process to unexpectedly restart. The vulnerability is due to incorrect validation of the HTTP header of a request that is sent to the NX-API. An attacker could exploit this vulnerability by sending a crafted HTTP request to the NX-API on an affected device. A successful exploit could allow the attacker to cause a denial of service (DoS) condition in the NX-API service; however, the Cisco NX-OS device itself would still be available and passing network traffic. Note: The NX-API feature is disabled by default.

A vulnerability in the local management (local-mgmt) CLI of Cisco FXOS Software and Cisco UCS Manager Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS) of an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by including crafted arguments to specific commands. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS with the privileges of the currently logged-in user for all affected platforms excluding Cisco UCS 6400 Series Fabric Interconnects. On Cisco UCS 6400 Series Fabric Interconnects, the injected commands are executed with root privileges.

A vulnerability in the Cisco Discovery Protocol feature of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code as root or cause a denial of service (DoS) condition on an affected device. The vulnerability exists because of insufficiently validated Cisco Discovery Protocol packet headers. An attacker could exploit this vulnerability by sending a crafted Cisco Discovery Protocol packet to a Layer 2-adjacent affected device. A successful exploit could allow the attacker to cause a buffer overflow that could allow the attacker to execute arbitrary code as root or cause a DoS condition on the affected device. Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). Note: This vulnerability is different from the following Cisco FXOS and NX-OS Software Cisco Discovery Protocol vulnerabilities that Cisco announced on Feb. 5, 2020: Cisco FXOS, IOS XR, and NX-OS Software Cisco Discovery Protocol Denial of Service Vulnerability and Cisco NX-OS Software Cisco Discovery Protocol Remote Code Execution Vulnerability.

A vulnerability in the local management (local-mgmt) CLI of Cisco UCS Manager Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS) on an affected device. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by including crafted arguments to specific commands on the local management CLI. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS with the privileges of the currently logged-in user for all affected platforms excluding Cisco UCS 6400 Series Fabric Interconnects. On Cisco UCS 6400 Series Fabric Interconnects, the injected commands are executed with root privileges.

A vulnerability in the anycast gateway feature of Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a device to learn invalid Address Resolution Protocol (ARP) entries. The ARP entries are for nonlocal IP addresses for the subnet. The vulnerability is due to improper validation of a received gratuitous ARP (GARP) request. An attacker could exploit this vulnerability by sending a malicious GARP packet on the local subnet to cause the ARP table on the device to become corrupted. A successful exploit could allow the attacker to populate the ARP table with incorrect entries, which could lead to traffic disruptions.

A vulnerability in the resource handling system of Cisco NX-OS Software for Cisco MDS 9000 Series Multilayer Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper resource usage control. An attacker could exploit this vulnerability by sending traffic to the management interface (mgmt0) of an affected device at very high rates. An exploit could allow the attacker to cause unexpected behaviors such as high CPU usage, process crashes, or even full system reboots of an affected device.

DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was in a CNA pool that was not assigned to any issues during 2019. Notes: none

DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was in a CNA pool that was not assigned to any issues during 2019. Notes: none

DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was in a CNA pool that was not assigned to any issues during 2019. Notes: none

DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was in a CNA pool that was not assigned to any issues during 2019. Notes: none

DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was in a CNA pool that was not assigned to any issues during 2019. Notes: none

DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was in a CNA pool that was not assigned to any issues during 2019. Notes: none

DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was in a CNA pool that was not assigned to any issues during 2019. Notes: none

DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was in a CNA pool that was not assigned to any issues during 2019. Notes: none

DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was in a CNA pool that was not assigned to any issues during 2019. Notes: none

DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was in a CNA pool that was not assigned to any issues during 2019. Notes: none

DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was in a CNA pool that was not assigned to any issues during 2019. Notes: none

DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was in a CNA pool that was not assigned to any issues during 2019. Notes: none

DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was in a CNA pool that was not assigned to any issues during 2019. Notes: none

A vulnerability in the implementation of Border Gateway Protocol (BGP) Message Digest 5 (MD5) authentication in Cisco NX-OS Software could allow an unauthenticated, remote attacker to bypass MD5 authentication and establish a BGP connection with the device. The vulnerability occurs because the BGP MD5 authentication is bypassed if the peer does not have MD5 authentication configured, the NX-OS device does have BGP MD5 authentication configured, and the NX-OS BGP virtual routing and forwarding (VRF) name is configured to be greater than 19 characters. An attacker could exploit this vulnerability by attempting to establish a BGP session with the NX-OS peer. A successful exploit could allow the attacker to establish a BGP session with the NX-OS device without MD5 authentication. The Cisco implementation of the BGP protocol accepts incoming BGP traffic only from explicitly configured peers. To exploit this vulnerability, an attacker must send the malicious packets over a TCP connection that appears to come from a trusted BGP peer. To do so, the attacker must obtain information about the BGP peers in the affected system’s trusted network.

IBM Sterling B2B Integrator Standard Edition 5.2.0.0 through 5.2.6.5 is vulnerable to cross-site request forgery which could allow an attacker to execute malicious and unauthorized actions transmitted from a user that the website trusts. IBM X-Force ID: 172363.

IBM Sterling B2B Integrator Standard Edition 5.2.0.0 through 5.2.6.5 is vulnerable to SQL injection. A remote attacker could send specially-crafted SQL statements, which could allow the attacker to view, add, modify or delete information in the back-end database. IBM X-Force ID: 167881.

IBM Sterling B2B Integrator Standard Edition 5.2.0.0 through 5.2.6.5 is vulnerable to SQL injection. A remote attacker could send specially-crafted SQL statements, which could allow the attacker to view, add, modify or delete information in the back-end database. IBM X-Force ID: 167880.

IBM Sterling B2B Integrator Standard Edition 5.2.0.0 through 5.2.6.5 is vulnerable to cross-site scripting. This vulnerability allows users to embed arbitrary JavaScript code in the Web UI thus altering the intended functionality potentially leading to credentials disclosure within a trusted session. IBM X-Force ID: 167879.

IBM WebSphere Service Registry and Repository 8.5 could allow a user to obtain sensitive version information that could be used in further attacks against the system. IBM X-Force ID: 165593.

An issue was discovered in Pure-FTPd 1.0.49. An uninitialized pointer vulnerability has been detected in the diraliases linked list. When the *lookup_alias(const char alias) or print_aliases(void) function is called, they fail to correctly detect the end of the linked list and try to access a non-existent list member. This is related to init_aliases in diraliases.c.

Fiserv Accurate Reconciliation 2.19.0, fixed in 3.0.0 or higher, allows XSS via the Source or Destination field of the Configuration Manager (Configuration Parameter Translation) page.

Fiserv Accurate Reconciliation 2.19.0, fixed in 3.0.0 or higher, allows XSS via the logout.jsp timeOut parameter.

An issue was discovered in Selesta Visual Access Manager (VAM) 4.15.0 through 4.29. An attacker without authentication is able to execute arbitrary SQL SELECT statements by injecting the HTTP (POST or GET) parameter persoid into /tools/VamPersonPhoto.php. The SQL Injection type is Error-based (this means that relies on error messages thrown by the database server to obtain information about the structure of the database).

An issue was discovered in Selesta Visual Access Manager (VAM) 4.15.0 through 4.29. It allows Cross-Site Request Forgery (CSRF) on any HTML form. An attacker can exploit the vulnerability to abuse functionalities such as change password, add user, add privilege, and so on.

An issue was discovered in Selesta Visual Access Manager (VAM) 4.15.0 through 4.29. A user with valid credentials is able to create and write XML files on the filesystem via /common/vam_editXml.php in the web interface. The vulnerable PHP page checks none of these: the parameter that identifies the file name to be created, the destination path, or the extension. Thus, an attacker can manipulate the file name to create any type of file within the filesystem with arbitrary content.

An issue was discovered in Selesta Visual Access Manager (VAM) 4.15.0 through 4.29. Several PHP pages, and other type of files, are reachable by any user without checking for user identity and authorization.

An issue was discovered in Selesta Visual Access Manager (VAM) 4.15.0 through 4.29. Multiple Stored Cross-site scripting (XSS) vulnerabilities allow remote authenticated users to inject arbitrary web script or HTML via the web pages /monitor/s_headmodel.php and /vam/vam_user.php.

An issue was discovered in Selesta Visual Access Manager (VAM) 4.15.0 through 4.29. Multiple Reflected Cross-site scripting (XSS) vulnerabilities allow remote authenticated users to inject arbitrary web script or HTML via the web pages /vam/vam_anagraphic.php, /vam/vam_vamuser.php, /common/vamp_main.php, and /wiz/change_password.php.

An issue was discovered in Selesta Visual Access Manager (VAM) 4.15.0 through 4.29. A user with valid credentials is able to read XML files on the filesystem via the web interface. The PHP page /common/vam_editXml.php doesn't check the parameter that identifies the file name to be read. Thus, an attacker can manipulate the file name to access a potentially sensitive file within the filesystem.

An issue was discovered in Selesta Visual Access Manager (VAM) 4.15.0 through 4.29. Several full path disclosure vulnerability were discovered. A user, even with no authentication, may simply send arbitrary content to the vulnerable pages to generate error messages that expose some full paths.

An issue was discovered in Selesta Visual Access Manager (VAM) 4.15.0 through 4.29. It allows blind Command Injection. An attacker without authentication is able to execute arbitrary operating system command by injecting the vulnerable parameter in the PHP Web page /common/vam_monitor_sap.php.

DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: none. Reason: This candidate was withdrawn by its CNA. Further investigation showed that it was not a security issue. Notes: none