CVE Feed

Huawei OSCA-550, OSCA-550A, OSCA-550AX, and OSCA-550X products with version 1.0.1.21(SP3) have an insufficient authentication vulnerability. The software does not require a strong credential when the user trying to do certain operations. Successful exploit could allow an attacker to pass the authentication and do certain operations by a weak credential.

HUAWEI P30 smartphones with versions earlier than 10.0.0.173(C00E73R1P11) have an improper authentication vulnerability. Due to improperly validation of certain application, an attacker should trick the user into installing a malicious application to exploit this vulnerability. Successful exploit could allow the attacker to bypass the authentication to perform unauthorized operations.

Huawei HEGE-570 version 1.0.1.22(SP3); and HEGE-560, OSCA-550, OSCA-550A, OSCA-550AX, and OSCA-550X version 1.0.1.21(SP3) have an insufficient verification vulnerability. An attacker can access the device physically and exploit this vulnerability to tamper with device information. Successful exploit may cause service abnormal.

Huawei HEGE-560 version 1.0.1.20(SP2), OSCA-550 version 1.0.0.71(SP1), OSCA-550A version 1.0.0.71(SP1), OSCA-550AX version 1.0.0.71(SP2), and OSCA-550X version 1.0.0.71(SP2) have an insufficient verification vulnerability. An attacker can perform specific operations to exploit this vulnerability by physical access methods. Successful exploitation may cause the attacker perform an illegal operation.

GaussDB 200 with version of 6.5.1 have a command injection vulnerability. The software constructs part of a command using external input from users, but the software does not sufficiently validate the user input. Successful exploit could allow the attacker to inject certain commands.

HUAWEI Mate 20 smartphones with versions earlier than 10.0.0.185(C00E74R3P8) have an improper authorization vulnerability. The system has a logic judging error under certain scenario, successful exploit could allow the attacker to switch to third desktop after a series of operation in ADB mode.

Huawei NIP6800 versions V500R001C30, V500R001C60SPC500, and V500R005C00; Secospace USG6600 and USG9500 versions V500R001C30SPC200, V500R001C30SPC600, V500R001C60SPC500, and V500R005C00 have a Dangling pointer dereference vulnerability. An authenticated attacker may do some special operations in the affected products in some special scenarios to exploit the vulnerability. Due to improper race conditions of different operations, successful exploit will lead to Dangling pointer dereference, causing some service abnormal.

Huawei smart phones P10 Plus with versions earlier than 9.1.0.201(C01E75R1P12T8), earlier than 9.1.0.252(C185E2R1P9T8), earlier than 9.1.0.252(C432E4R1P9T8), and earlier than 9.1.0.255(C576E6R1P8T8) have a digital balance bypass vulnerability. When re-configuring the mobile phone at the digital balance mode, an attacker can perform some operations to bypass the startup wizard, and then open some switch. As a result, the digital balance function is bypassed.

A cross-site scripting (XSS) flaw was found in RESTEasy in versions before 3.11.1.Final and before 4.5.3.Final, where it did not properly handle URL encoding when the RESTEASY003870 exception occurs. An attacker could use this flaw to launch a reflected XSS attack.

A race condition flaw was found in Ansible Engine 2.7.17 and prior, 2.8.9 and prior, 2.9.6 and prior when running a playbook with an unprivileged become user. When Ansible needs to run a module with become user, the temporary directory is created in /var/tmp. This directory is created with "umask 77 && mkdir -p <dir>"; this operation does not fail if the directory already exists and is owned by another user. An attacker could take advantage to gain control of the become user as the target directory can be retrieved by iterating '/proc/<pid>/cmdline'.

A flaw was found in the pipe lookup plugin of ansible. Arbitrary commands can be run, when the pipe lookup plugin uses subprocess.Popen() with shell=True, by overwriting ansible facts and the variable is not escaped by quote plugin. An attacker could take advantage and run arbitrary commands by overwriting the ansible facts.

A flaw was found in the Ansible Engine when the fetch module is used. An attacker could intercept the module, inject a new path, and then choose a new destination path on the controller node. All versions in 2.7.x, 2.8.x and 2.9.x branches are believed to be vulnerable.

A flaw was found in Ansible Engine when a file is moved using atomic_move primitive as the file mode cannot be specified. This sets the destination files world-readable if the destination file does not exist and if the file exists, the file could be changed to have less restrictive permissions before the move. This could lead to the disclosure of sensitive data. All versions in 2.7.x, 2.8.x and 2.9.x branches are believed to be vulnerable.

A flaw was found in Ansible 2.7.17 and prior, 2.8.9 and prior, and 2.9.6 and prior when using the Extract-Zip function from the win_unzip module as the extracted file(s) are not checked if they belong to the destination folder. An attacker could take advantage of this flaw by crafting an archive anywhere in the file system, using a path traversal. This issue is fixed in 2.10.

A flaw was found in Ansible Engine when the module package or service is used and the parameter 'use' is not specified. If a previous task is executed with a malicious user, the module sent can be selected by the attacker using the ansible facts file. All versions in 2.7.x, 2.8.x and 2.9.x branches are believed to be vulnerable.

A flaw was found in Ansible 2.7.16 and prior, 2.8.8 and prior, and 2.9.5 and prior when a password is set with the argument "password" of svn module, it is used on svn command line, disclosing to other users within the same node. An attacker could take advantage by reading the cmdline file from that particular PID on the procfs.

A flaw was found in Ansible Engine when using Ansible Vault for editing encrypted files. When a user executes "ansible-vault edit", another user on the same computer can read the old and new secret, as it is created in a temporary file with mkstemp and the returned file descriptor is closed and the method write_data is called to write the existing secret in the file. This method will delete the file before recreating it insecurely. All versions in 2.7.x, 2.8.x and 2.9.x branches are believed to be vulnerable.

Type confusion in V8 in Google Chrome prior to 80.0.3987.116 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page.

Previously, Puppet operated on a model that a node with a valid certificate was entitled to all information in the system and that a compromised certificate allowed access to everything in the infrastructure. When a node's catalog falls back to the `default` node, the catalog can be retrieved for a different node by modifying facts for the Puppet run. This issue can be mitigated by setting `strict_hostname_checking = true` in `puppet.conf` on your Puppet master. Puppet 6.13.0 and 5.5.19 changes the default behavior for strict_hostname_checking from false to true. It is recommended that Puppet Open Source and Puppet Enterprise users that are not upgrading still set strict_hostname_checking to true to ensure secure behavior. Affected software versions: Puppet 6.x prior to 6.13.0 Puppet Agent 6.x prior to 6.13.0 Puppet 5.5.x prior to 5.5.19 Puppet Agent 5.5.x prior to 5.5.19 Resolved in: Puppet 6.13.0 Puppet Agent 6.13.0 Puppet 5.5.19 Puppet Agent 5.5.19

Use after free in WebAudio in Google Chrome prior to 80.0.3987.116 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page.

Use after free in speech in Google Chrome prior to 80.0.3987.116 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page.

Huawei mobile phones Ever-L29B versions earlier than 10.0.0.180(C185E6R3P3), earlier than 10.0.0.180(C432E6R1P7), earlier than 10.0.0.180(C636E5R2P3); HUAWEI Mate 20 RS versions earlier than 10.0.0.175(C786E70R3P8); HUAWEI Mate 20 X versions earlier than 10.0.0.176(C00E70R2P8); and Honor Magic2 versions earlier than 10.0.0.175(C00E59R2P11) have an improper authorization vulnerability. Due to improper authorization of some function, attackers can bypass the authorization to perform some operations.

Huawei NIP6800 versions V500R001C30, V500R001C60SPC500, and V500R005C00; Secospace USG6600 and USG9500 versions V500R001C30SPC200, V500R001C30SPC600, V500R001C60SPC500, and V500R005C00 have a vulnerability that a memory management error exists when IPSec Module handing a specific message. This causes 1 byte out-of-bound read, compromising normal service.

GaussDB 200 with version of 6.5.1 have a command injection vulnerability. Due to insufficient input validation, remote attackers with low permissions could exploit this vulnerability by sending crafted commands to the affected device. Successful exploit could allow an attacker to execute commands.

Huawei NIP6800 versions V500R001C30, V500R001C60SPC500, and V500R005C00; Secospace USG6600 and USG9500 versions V500R001C30SPC200, V500R001C30SPC600, V500R001C60SPC500, and V500R005C00 have a Denial of Service (DoS) vulnerability. Due to improper processing of specific IPSEC packets, remote attackers can send constructed IPSEC packets to affected devices to exploit this vulnerability. Successful exploit could cause the IPSec function of the affected device abnormal.

Huawei NIP6800 versions V500R001C30, V500R001C60SPC500, and V500R005C00; Secospace USG6600 and USG9500 versions V500R001C30SPC200, V500R001C30SPC600, V500R001C60SPC500, and V500R005C00 have a memory leak vulnerability. The software does not sufficiently track and release allocated memory while parse certain message, the attacker sends the message continuously that could consume remaining memory. Successful exploit could cause memory exhaust.

SQL injection vulnerability in Zend Framework before 1.12.9, 2.2.x before 2.2.8, and 2.3.x before 2.3.3, when using the sqlsrv PHP extension, allows remote attackers to execute arbitrary SQL commands via a null byte.

DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2012-4531. Reason: This candidate is a duplicate of CVE-2012-4531. Notes: All CVE users should reference CVE-2012-4531 instead of this candidate. All references and descriptions in this candidate have been removed to prevent accidental usage

LPAR2RRD in 3.5 and earlier allows remote attackers to execute arbitrary commands due to insufficient input sanitization of the web GUI parameters.

Eval injection vulnerability in lib/TWiki/Plugins.pm in TWiki before 6.0.1 allows remote attackers to execute arbitrary Perl code via the debugenableplugins parameter to do/view/Main/WebHome.

GaussDB 200 with version of 6.5.1 have a path traversal vulnerability. Due to insufficient input path validation, an authenticated attacker can traverse directories and download files to a specific directory. Successful exploit may cause information leakage.

Huawei CloudLink Board version 20.0.0; DP300 version V500R002C00; RSE6500 versions V100R001C00, V500R002C00, and V500R002C00SPC900; and TE60 versions V500R002C00, V600R006C00, V600R006C00SPC200, V600R006C00SPC300, V600R006C10, V600R019C00, and V600R019C00SPC100 have an information leak vulnerability. An unauthenticated, remote attacker can make a large number of attempts to guess information. Successful exploitation may cause information leak.

Huawei NIP6800 versions V500R001C30, V500R001C60SPC500, and V500R005C00SPC100; and Secospace USG6600 and USG9500 versions V500R001C30SPC200, V500R001C30SPC600, V500R001C60SPC500, and V500R005C00SPC100 have an information leakage vulnerability. An attacker can exploit this vulnerability by sending specific request packets to affected devices. Successful exploit may lead to information leakage.

Huawei NGFW Module, NIP6300, NIP6600, Secospace USG6500, Secospace USG6600, and USG9500 versions V500R001C30, V500R001C60, and V500R005C00 have an information leakage vulnerability. An attacker can exploit this vulnerability by sending specific request packets to affected devices. Successful exploit may lead to information leakage.

LabVantage LIMS 8.3 does not properly maintain the confidentiality of database names. For example, the web application exposes the database name. An attacker might be able to enumerate database names by providing his own database name in a request, because the response will return an 'Unrecognized Database exception message if the database does not exist.

Huawei NIP6800 versions V500R001C30 and V500R001C60SPC500; and Secospace USG6600 and USG9500 versions V500R001C30SPC200, V500R001C30SPC600, and V500R001C60SPC500 have a vulnerability that the IPSec module handles a message improperly. Attackers can send specific message to cause double free memory. This may compromise normal service.

An issue was discovered on Phoenix Contact Emalytics Controller ILC 2050 BI before 1.2.3 and BI-L before 1.2.3 devices. There is an insecure mechanism for read and write access to the configuration of the device. The mechanism can be discovered by examining a link on the website of the device.

Huawei NIP6800 versions V500R001C30, V500R001C60SPC500, and V500R005C00SPC100; and Secospace USG6600 and USG9500 versions V500R001C30SPC200, V500R001C30SPC600, V500R001C60SPC500, and V500R005C00SPC100 have an information leakage vulnerability. Due to improper processing of some data, a local authenticated attacker can exploit this vulnerability through a series of operations. Successful exploitation may cause information leakage.

SilverStripe through 4.4.x before 4.4.5 and 4.5.x before 4.5.2 allows Reflected XSS on the login form and custom forms. Silverstripe Forms allow malicious HTML or JavaScript to be inserted through non-scalar FormField attributes, which allows performing XSS (Cross-Site Scripting) on some forms built with user input (Request data). This can lead to phishing attempts to obtain a user's credentials or other sensitive user input.

Huawei NIP6800 versions V500R001C30, V500R001C60SPC500, and V500R005C00; and Secospace USG6600 and USG9500 versions V500R001C30SPC200, V500R001C30SPC600, V500R001C60SPC500, and V500R005C00 have an input validation vulnerability where the IPSec module does not validate a field in a specific message. Attackers can send specific message to cause out-of-bound read, compromising normal service.

Huawei products NIP6800 versions V500R001C30, V500R001C60SPC500, and V500R005C00SPC100; Secospace USG6600 versions V500R001C30SPC600, V500R001C60SPC500, and V500R005C00SPC100; and USG9500 versions V500R001C30SPC600, V500R001C60SPC500, and V500R005C00SPC100 have a denial of service vulnerability. Attackers need to perform a series of operations in a special scenario to exploit this vulnerability. Successful exploit may cause the new connections can't be established, result in a denial of service.

codecov-node npm module before 3.6.5 allows remote attackers to execute arbitrary commands.The value provided as part of the gcov-root argument is executed by the exec function within lib/codecov.js. This vulnerability exists due to an incomplete fix of CVE-2020-7596.

Insufficient access control in the web interface of ABB Asset Suite versions 9.0 to 9.3, 9.4 prior to 9.4.2.6, 9.5 prior to 9.5.3.2 and 9.6.0 enables full access to directly referenced objects. An attacker with knowledge of a resource's URL can access the resource directly.

An issue was discovered in Zoho ManageEngine Remote Access Plus 10.0.447. The service to test the mail-server configuration suffers from an authorization issue allowing a user with the Guest role (read-only access) to use and abuse it. One of the abuses allows performing network and port scan operations of the localhost or the hosts on the same network segment, aka SSRF.

Webkit-GTK 2.x (any version with HTML5 audio/video support based on GStreamer) allows remote attackers to trigger unexpectedly high sound volume via malicious javascript. NOTE: this WebKit-GTK behavior complies with existing W3C standards and existing practices for GNOME desktop integration.

DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2014-5005. Reason: This candidate is a reservation duplicate of CVE-2014-5005. Notes: All CVE users should reference CVE-2014-5005 instead of this candidate. All references and descriptions in this candidate have been removed to prevent accidental usage

The fetch function in OAuth/Curl.php in Dropbox-PHP, as used in ownCloud Server before 6.0.8, 7.x before 7.0.6, and 8.x before 8.0.4 when an external Dropbox storage has been mounted, allows remote administrators of Dropbox.com to read arbitrary files via an @ (at sign) character in unspecified POST values.

Kaseya Virtual System Administrator (VSA) 7.x before 7.0.0.33, 8.x before 8.0.0.23, 9.0 before 9.0.0.19, and 9.1 before 9.1.0.9 does not properly require authentication, which allows remote attackers to bypass authentication and (1) add an administrative account via crafted request to LocalAuth/setAccount.aspx or (2) write to and execute arbitrary files via a full pathname in the PathData parameter to ConfigTab/uploader.aspx.

Multiple incomplete blacklist vulnerabilities in the avatar upload functionality in manageuser.php in Collabtive before 2.1 allow remote authenticated users to execute arbitrary code by uploading a file with a (1) .php3, (2) .php4, (3) .php5, or (4) .phtml extension.

The wpCentral plugin before 1.5.1 for WordPress allows disclosure of the connection key.