CVE Feed

A vulnerability in the DHCPv6 input packet processor of Cisco Prime Network Registrar could allow an unauthenticated, remote attacker to restart the server and cause a denial of service (DoS) condition on the affected system. The vulnerability is due to incomplete user-supplied input validation when a custom extension attempts to change a DHCPv6 packet received by the application. An attacker could exploit this vulnerability by sending malformed DHCPv6 packets to the application. An exploit could allow the attacker to trigger a restart of the service which, if exploited repeatedly, might lead to a DoS condition. This vulnerability can only be exploited if the administrator of the server has previously installed custom extensions that attempt to modify the packet details before the packet has been processed. Note: Although the CVSS score matches a High SIR, this has been lowered to Medium because this condition will only affect an application that has customer-developed extensions that will attempt to modify packet parameters before the packet has been completely sanitized. If packet modification in a custom extension happens after the packet has been sanitized, the application will not be affected by this vulnerability. Software versions prior to 8.3(7) and 9.1(2) are affected.

A vulnerability in the email message scanning of Cisco AsyncOS Software for Cisco Email Security Appliance (ESA) could allow an unauthenticated, remote attacker to bypass configured content filters on the device. The vulnerability is due to improper input validation of the email body. An attacker could exploit this vulnerability by inserting specific character strings in the message. A successful exploit could allow the attacker to bypass configured content filters that would normally drop the email.

A vulnerability in the internal packet processing of Cisco Aironet Series Access Points (APs) could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected AP if the switch interface where the AP is connected has port security configured. The vulnerability exists because the AP forwards some malformed wireless client packets outside of the Control and Provisioning of Wireless Access Points (CAPWAP) tunnel. An attacker could exploit this vulnerability by sending crafted wireless packets to an affected AP. A successful exploit could allow the attacker to trigger a security violation on the adjacent switch port, which could result in a DoS condition. Note: Though the Common Vulnerability Scoring System (CVSS) score corresponds to a High Security Impact Rating (SIR), this vulnerability is considered Medium because a workaround is available and exploitation requires a specific switch configuration. There are workarounds that address this vulnerability.

A vulnerability in the CLI of Cisco Aironet Access Points (APs) could allow an authenticated, local attacker to access sensitive information stored in an AP. The vulnerability is due to improper sanitization of user-supplied input in specific CLI commands. An attacker could exploit this vulnerability by accessing the CLI of an affected AP with administrator privileges and issuing crafted commands that result in directory traversal. A successful exploit could allow the attacker to view system files on the affected device, which could contain sensitive information. Software versions 8.8 and 8.9 are affected.

A vulnerability in the quality of service (QoS) feature of Cisco Aironet Series Access Points (APs) could allow an authenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper input validation on QoS fields within Wi-Fi frames by the affected device. An attacker could exploit this vulnerability by sending malformed Wi-Fi frames to an affected device. A successful exploit could allow the attacker to cause the affected device to crash, resulting in a DoS condition.

A vulnerability in the CLI of Cisco Aironet Series Access Points (APs) could allow an authenticated, local attacker to gain access to the underlying Linux operating system (OS) without the proper authentication. The attacker would need valid administrator device credentials. The vulnerability is due to improper validation of user-supplied input for certain CLI commands. An attacker could exploit this vulnerability by authenticating to an affected device and submitting crafted input for a CLI command. A successful exploit could allow the attacker to obtain access to the underlying Linux OS without proper authentication.

A vulnerability in Locally Significant Certificate (LSC) management for the Cisco Wireless LAN Controller (WLC) could allow an authenticated, remote attacker to cause the device to unexpectedly restart, which causes a denial of service (DoS) condition. The attacker would need to have valid administrator credentials. The vulnerability is due to incorrect input validation of the HTTP URL used to establish a connection to the LSC Certificate Authority (CA). An attacker could exploit this vulnerability by authenticating to the targeted device and configuring a LSC certificate. An exploit could allow the attacker to cause a DoS condition due to an unexpected restart of the device.

A vulnerability in the web-based management interface of Cisco Firepower Management Center (FMC) could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface of an affected system. The vulnerability is due to insufficient validation of user-supplied input in the web-based management interface of the affected system. An attacker could exploit this vulnerability by persuading a user to access a report containing malicious content. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. Versions 6.2.3, 6.3.0, and 6.4.0 are affected.

A vulnerability in certain access control mechanisms for the Secure Shell (SSH) server implementation for Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, adjacent attacker to access a CLI instance on an affected device. The vulnerability is due to a lack of proper input- and validation-checking mechanisms for inbound SSH connections on an affected device. An attacker could exploit this vulnerability by attempting to establish an SSH connection to an affected controller. An exploit could allow the attacker to access an affected device's CLI to potentially cause further attacks. This vulnerability has been fixed in version 8.5(140.0).

A vulnerability in the web-based management interface of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack and perform arbitrary actions on the device with the privileges of the user, including modifying the device configuration. The vulnerability is due to insufficient CSRF protections for the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading an interface user to follow a crafted link. A successful exploit could allow the attacker to perform arbitrary actions on the device with the privileges of the user. Software versions prior to 8.3.150.0, 8.5.135.0, and 8.8.100.0 are affected.

A vulnerability in the handling of Inter-Access Point Protocol (IAPP) messages by Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition. The vulnerability exist because the software improperly validates input on fields within IAPP messages. An attacker could exploit the vulnerability by sending malicious IAPP messages to an affected device. A successful exploit could allow the attacker to cause the Cisco WLC Software to reload, resulting in a DoS condition. Software versions prior to 8.2.170.0, 8.5.150.0, and 8.8.100.0 are affected.

A vulnerability in the handling of Inter-Access Point Protocol (IAPP) messages by Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition. The vulnerability exist because the software improperly validates input on fields within IAPP messages. An attacker could exploit the vulnerability by sending malicious IAPP messages to an affected device. A successful exploit could allow the attacker to cause the Cisco WLC Software to reload, resulting in a DoS condition. Software versions prior to 8.2.170.0, 8.5.150.0, and 8.8.100.0 are affected.

A vulnerability in the handling of Inter-Access Point Protocol (IAPP) messages by Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition. The vulnerability exist because the software improperly validates input on fields within IAPP messages. An attacker could exploit the vulnerability by sending malicious IAPP messages to an affected device. A successful exploit could allow the attacker to cause the Cisco WLC Software to reload, resulting in a DoS condition. Software versions prior to 8.2.170.0, 8.5.150.0, and 8.8.100.0 are affected.

A vulnerability in the search path processing of Cisco Directory Connector could allow an authenticated, local attacker to load a binary of their choosing. The vulnerability is due to uncontrolled search path elements. An attacker could exploit this vulnerability by placing a binary of their choosing earlier in the search path utilized by Cisco Directory Connector to locate and load required resources.

A vulnerability in the URL block page of Cisco Umbrella could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user in a network protected by Umbrella. The vulnerability is due to insufficient validation of input parameters passed to that page. An attacker could exploit this vulnerability by persuading a user of the interface to click a maliciously crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or access sensitive browser-based information. This vulnerability has been fixed in the current version of Cisco Umbrella. Cisco Umbrella is a cloud service.

A vulnerability in the local management CLI implementation for specific commands on the Cisco UCS B-Series Blade Servers could allow an authenticated, local attacker to overwrite an arbitrary file on disk. It is also possible the attacker could inject CLI command parameters that should not be allowed for a specific subset of local management CLI commands. The vulnerability is due to lack of proper input validation of user input for local management CLI commands. An attacker could exploit this vulnerability by authenticating to the device and issuing a crafted form of a limited subset of local management CLI commands. An exploit could allow the attacker to overwrite an arbitrary files on disk or inject CLI command parameters that should have been disabled. This vulnerability is fixed in software version 4.0(2a) and later.

A vulnerability in the web-based interface of the Cisco Registered Envelope Service could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against another user of the service. The vulnerability is due to insufficient validation of user-supplied input by the web-based interface of the affected software. An attacker could exploit this vulnerability by sending an email with a malicious payload to another user. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. This vulnerability affects software versions 5.3.4.x.

A vulnerability in the XML API of Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) could allow an authenticated, remote attacker to cause the CPU to increase to 100% utilization, causing a denial of service (DoS) condition on an affected system. The vulnerability is due to improper handling of the XML input. An attacker could exploit this vulnerability by sending a specifically crafted XML payload. A successful exploit could allow the attacker to exhaust CPU resources, resulting in a DoS condition until the system is manually rebooted. Software versions prior to X12.5.1 are affected.

A vulnerability in the phone book feature of Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) could allow an authenticated, remote attacker to cause the CPU to increase to 100% utilization, causing a denial of service (DoS) condition on an affected system. The vulnerability is due to improper handling of the XML input. An attacker could exploit this vulnerability by sending a Session Initiation Protocol (SIP) message with a crafted XML payload to an affected device. A successful exploit could allow the attacker to exhaust CPU resources, resulting in a DoS condition. Manual intervention may be required to recover the device. This vulnerability is fixed in Cisco Expressway Series and Cisco TelePresence Video Communication Server Releases X12.5.1 and later.

A vulnerability in the FindMe feature of Cisco Expressway Series and Cisco TelePresence Video Communication Server (VCS) could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack and perform arbitrary actions on an affected system. The vulnerability is due to insufficient CSRF protections for the web-based management interface of the affected system. An attacker could exploit this vulnerability by persuading a user of the interface to follow a maliciously crafted link. A successful exploit could allow the attacker to perform arbitrary actions on an affected system with the privileges of the user. The arbitrary actions include adding an attacker-controlled device and redirecting calls intended for a specific user. For more information about CSRF attacks and potential mitigations, see Understanding Cross-Site Request Forgery Threat Vectors. This vulnerability is fixed in software version X12.5.1 and later.

A vulnerability in the web-based guest portal of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface. The vulnerability is due to insufficient validation of user-supplied input that is processed by the web-based interface. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or access sensitive browser-based information. Cisco ISE software version 2.1 is affected.

In ImageMagick 7.x before 7.0.8-41 and 6.x before 6.9.10-41, there is a divide-by-zero vulnerability in the MeanShiftImage function. It allows an attacker to cause a denial of service by sending a crafted file.

The JSON encoder in Dovecot before 2.3.5.2 allows attackers to repeatedly crash the authentication service by attempting to authenticate with an invalid UTF-8 sequence as the username.

It was found that default configuration of Heketi does not require any authentication potentially exposing the management interface to misuse. This isue only affects heketi as shipped with Openshift Container Platform 3.11.

Network Time Protocol (NTP), as specified in RFC 5905, uses port 123 even for modes where a fixed port number is not required, which makes it easier for remote attackers to conduct off-path attacks.

The EAP-pwd implementation in hostapd (EAP server) before 2.8 and wpa_supplicant (EAP peer) before 2.8 does not validate fragmentation reassembly state properly for a case where an unexpected fragment could be received. This could result in process termination due to a NULL pointer dereference (denial of service). This affects eap_server/eap_server_pwd.c and eap_peer/eap_pwd.c.

libvirt-domain.c in libvirt before 1.3.1 supports virDomainGetTime API calls by guest agents with an RO connection, even though an RW connection was supposed to be required, a different vulnerability than CVE-2019-3886.

In Eclipse Jetty version 7.x, 8.x, 9.2.27 and older, 9.3.26 and older, and 9.4.16 and older, the server running on any OS and Jetty version combination will reveal the configured fully qualified directory base resource location on the output of the 404 error for not finding a Context that matches the requested path. The default server behavior on jetty-distribution and jetty-home will include at the end of the Handler tree a DefaultHandler, which is responsible for reporting this 404 error, it presents the various configured contexts as HTML for users to click through to. This produced HTML includes output that contains the configured fully qualified directory base resource location for each context.

A vulnerability in the Protocol Independent Multicast (PIM) feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause the PIM process to restart, resulting in a denial of service condition on an affected device. The vulnerability is due to the incorrect processing of crafted AutoRP packets. An attacker could exploit this vulnerability by sending crafted packets to port UDP 496 on a reachable IP address on the device. A successful exploit could allow the attacker to cause the PIM process to restart. Software versions prior to 6.2.3, 6.3.2, 6.4.0, and 6.5.1 are affected.

A vulnerability in the web interface of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to trigger high CPU usage, resulting in a denial of service (DoS) condition. The vulnerability is due to improper handling of Secure Sockets Layer (SSL) renegotiation requests. An attacker could exploit this vulnerability by sending renegotiation requests at a high rate. An successful exploit could increase the resource usage on the system, eventually leading to a DoS condition. This vulnerability affects version 2.1.

A vulnerability in the Event Management Service daemon (emsd) of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper handling of gRPC requests. An attacker could exploit this vulnerability by repeatedly sending unauthenticated gRPC requests to the affected device. A successful exploit could cause the emsd process to crash, resulting in a DoS condition. Resolved in Cisco IOS XR 6.5.1 and later.

A vulnerability in the TCP flags inspection feature for access control lists (ACLs) on Cisco ASR 9000 Series Aggregation Services Routers could allow an unauthenticated, remote attacker to bypass protection offered by a configured ACL on an affected device. The vulnerability is due to incorrect processing of the ACL applied to an interface of an affected device when Cisco Express Forwarding load balancing using the 3-tuple hash algorithm is enabled. An attacker could exploit this vulnerability by sending traffic through an affected device that should otherwise be denied by the configured ACL. An exploit could allow the attacker to bypass protection offered by a configured ACL on the affected device. There are workarounds that address this vulnerability. Affected Cisco IOS XR versions are: Cisco IOS XR Software Release 5.1.1 and later till first fixed. First Fixed Releases: 6.5.2 and later, 6.6.1 and later.

A vulnerability in the sysadmin virtual machine (VM) on Cisco ASR 9000 Series Aggregation Services Routers running Cisco IOS XR 64-bit Software could allow an unauthenticated, remote attacker to access internal applications running on the sysadmin VM. The vulnerability is due to incorrect isolation of the secondary management interface from internal sysadmin applications. An attacker could exploit this vulnerability by connecting to one of the listening internal applications. A successful exploit could result in unstable conditions, including both a denial of service and remote unauthenticated access to the device. This vulnerability has been fixed in Cisco IOS XR 64-bit Software Release 6.5.3 and 7.0.1, which will edit the calvados_boostrap.cfg file and reload the device.

A vulnerability in the development shell (devshell) authentication for Cisco Aironet Series Access Points (APs) running the Cisco AP-COS operating system could allow an authenticated, local attacker to access the development shell without proper authentication, which allows for root access to the underlying Linux OS. The attacker would need valid device credentials. The vulnerability exists because the software improperly validates user-supplied input at the CLI authentication prompt for development shell access. An attacker could exploit this vulnerability by authenticating to the device and entering crafted input at the CLI. A successful exploit could allow the attacker to access the AP development shell without proper authentication, which allows for root access to the underlying Linux OS. Software versions prior to 8.3.150.0, 8.5.135.0, and 8.8.100.0 are affected.

A vulnerability in the session identification management functionality of the web-based interface of Cisco Wireless LAN Controller (WLC) Software could allow an unauthenticated, remote attacker to hijack a valid user session on an affected system. The vulnerability exists because the affected software does not properly clear previously assigned session identifiers for a user session when a user authenticates to the web-based interface. An attacker could exploit this vulnerability by using an existing session identifier to connect to the software through the web-based interface. Successful exploitation could allow the attacker to hijack an authenticated user's browser session on the system. Versions 8.1 and 8.5 are affected.

A vulnerability in the administrative GUI configuration feature of Cisco Wireless LAN Controller (WLC) Software could allow an aUTHENTICated, remote attacker to cause the device to reload unexpectedly during device configuration when the administrator is using this GUI, causing a denial of service (DoS) condition on an affected device. The attacker would need to have valid administrator credentials on the device. This vulnerability is due to incomplete input validation for unexpected configuration options that the attacker could submit while accessing the GUI configuration menus. An attacker could exploit these vulnerabilities by authenticating to the device and submitting crafted user input when using the administrative GUI configuration feature. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Software versions prior to 8.3.150.0, 8.5.140.0, 8.8.111.0 are affected by this vulnerability.

Contao 3.x before 3.5.37, 4.4.x before 4.4.31 and 4.6.x before 4.6.11 has Incorrect Access Control.

Contao 4.7 allows CSRF.

Contao 4.7 allows Use of a Key Past its Expiration Date.

Contao before 3.5.39 and 4.x before 4.7.3 has a Weak Password Recovery Mechanism for a Forgotten Password.

Insufficient input validation in system firmware for Intel(R) Broadwell U i5 vPro before version MYBDWi5v.86A may allow an authenticated user to potentially enable escalation of privilege, denial of service, and/or information disclosure via local access.

Memory access in virtual memory mapping for some microprocessors may allow an authenticated user to potentially enable information disclosure via local access.

Insufficient path checking in the installation package for Intel(R) Graphics Performance Analyzer for Linux version 18.4 and before may allow an authenticated user to potentially enable escalation of privilege via local access.

Improper directory permissions in installer for Intel(R) Media SDK before 2018 R2.1 may allow an authenticated user to potentially enable escalation of privilege via local access.

An issue was discovered in GitLab Community and Enterprise Edition before 11.6.10, 11.7.x before 11.7.6, and 11.8.x before 11.8.1. It allows Uncontrolled Resource Consumption.

An issue was discovered in GitLab Community and Enterprise Edition before 11.6.10, 11.7.x before 11.7.6, and 11.8.x before 11.8.1. It allows Information Exposure.

An issue was discovered in GitLab Community and Enterprise Edition before 11.6.10, 11.7.x before 11.7.6, and 11.8.x before 11.8.1. It has Insecure Permissions.

An issue was discovered in GitLab Community and Enterprise Edition before 11.6.10, 11.7.x before 11.7.6, and 11.8.x before 11.8.1. Its User Interface has a Misrepresentation of Critical Information.

An issue was discovered in GitLab Community and Enterprise Edition before 11.6.10, 11.7.x before 11.7.6, and 11.8.x before 11.8.1. It has Incorrect Access Control (issue 2 of 5).

An issue was discovered in GitLab Community and Enterprise Edition before 11.6.10, 11.7.x before 11.7.6, and 11.8.x before 11.8.1. It has Incorrect Access Control (issue 5 of 5).