CVE Feed

It has been discovered in redhat-certification that any unauthorized user may download any file under /var/www/rhcert, provided they know its name. Red Hat Certification 6 and 7 is vulnerable to this issue.

It was discovered that the /configuration view of redhat-certification 7 does not perform an authorization check and it allows an unauthenticated user to call a "restart" RPC method on any host accessible by the system, even if not belonging to him.

WildFly Core before version 6.0.0.Alpha3 does not properly validate file paths in .war archives, allowing for the extraction of crafted .war archives to overwrite arbitrary files. This is an instance of the 'Zip Slip' vulnerability.

It was discovered that the /configuration view of redhat-certification 7 does not perform an authorization check and it allows an unauthenticated user to remove a "system" file, that is an xml file with host related information, not belonging to him.

The WEBP::GetLE32 function in XMPFiles/source/FormatSupport/WEBP_Support.hpp in Exempi 2.4.5 has a NULL pointer dereference.

GIMP through 2.10.2 makes g_get_tmp_dir calls to establish temporary filenames, which may result in a filename that already exists, as demonstrated by the gimp_write_and_read_file function in app/tests/test-xcf.c. This might be leveraged by attackers to overwrite files or read file content that was intended to be private.

A vulnerability in the Border Gateway Protocol (BGP) implementation of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to the device unexpectedly reloading. The vulnerability is due to incomplete input validation of the BGP update messages. An attacker could exploit this vulnerability by sending a crafted BGP update message to the targeted device. An exploit could allow the attacker to cause the switch to reload unexpectedly. The Cisco implementation of the BGP protocol only accepts incoming BGP traffic from explicitly defined peers. To exploit this vulnerability, an attacker must be able to send the malicious packets over a TCP connection that appears to come from a trusted BGP peer or inject malformed messages into the victim's BGP network. This would require obtaining information about the BGP peers in the affected system's trusted network. The vulnerability may be triggered when the router receives a malformed BGP message from a peer on an existing BGP session. At least one BGP neighbor session must be established for a router to be vulnerable. This vulnerability affects Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCve79599, CSCve87784, CSCve91371, CSCve91387.

A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to craft a packet to the management interface on an affected system, causing a buffer overflow. The vulnerability is due to incorrect input validation in the authentication module of the NX-API subsystem. An attacker could exploit this vulnerability by sending a crafted HTTP or HTTPS packet to the management interface of an affected system with the NX-API feature enabled. An exploit could allow the attacker to execute arbitrary code as root. Note: NX-API is disabled by default. This vulnerability affects: MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvd45804, CSCve02322, CSCve02412.

A vulnerability in the CLI of Cisco NX-OS Software could allow an authenticated, local attacker to perform a command-injection attack on an affected device. The vulnerability is due to insufficient input validation of command arguments. An attacker could exploit this vulnerability by injecting malicious command arguments into a vulnerable CLI command. A successful exploit could allow the attacker, authenticated as a privileged user, to execute arbitrary commands with root privileges. Note: On products that support multiple virtual device contexts (VDC), this vulnerability could allow an attacker to access files from any VDC. This vulnerability affects Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCve51704, CSCve91749, CSCve91768.

A vulnerability in role-based access control (RBAC) for Cisco NX-OS Software could allow an authenticated, remote attacker to execute CLI commands that should be restricted for a nonadministrative user. The attacker would have to possess valid user credentials for the device. The vulnerability is due to incorrect RBAC privilege assignment for certain CLI commands. An attacker could exploit this vulnerability by authenticating to a device as a nonadministrative user and executing specific commands from the CLI. An exploit could allow the attacker to run commands that should be restricted to administrative users. These commands could modify the configuration or boot image on the device. This vulnerability affects MDS 9000 Series Multilayer Switches, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvd77904.

A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to read sensitive memory content, create a denial of service (DoS) condition, or execute arbitrary code as root. The vulnerability exists because the affected software insufficiently validates Cisco Fabric Services packet headers. An attacker could exploit this vulnerability by sending a crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow or buffer overread condition in the Cisco Fabric Services component, which could allow the attacker to read sensitive memory content, create a DoS condition, or execute arbitrary code as root. This vulnerability affects the following if configured to use Cisco Fabric Services: Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69951, CSCve02459, CSCve02461, CSCve02463, CSCve02474, CSCve04859.

A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to execute arbitrary code or cause a denial of service (DoS) condition. The vulnerability exists because the affected software insufficiently validates header values in Cisco Fabric Services packets. An attacker could exploit this vulnerability by sending a crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow that could allow the attacker to execute arbitrary code or cause a DoS condition. This vulnerability affects the following if configured to use Cisco Fabric Services: Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69954, CSCve02463, CSCve02785, CSCve02787, CSCve02804, CSCve04859.

A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco NX-OS Software could allow an authenticated, remote attacker to cause the SNMP application on an affected device to restart unexpectedly. The vulnerability is due to improper validation of SNMP protocol data units (PDUs) in SNMP packets. An attacker could exploit this vulnerability by sending a crafted SNMP packet to an affected device. A successful exploit could allow the attacker to cause the SNMP application to restart multiple times, leading to a system-level restart and a denial of service (DoS) condition. This vulnerability affects Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCuw99630, CSCvg71290, CSCvj67977.

A vulnerability in the Internet Group Management Protocol (IGMP) Snooping feature of Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code and gain full control of an affected system. The attacker could also cause an affected system to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to a buffer overflow condition in the IGMP Snooping subsystem. An attacker could exploit this vulnerability by sending crafted IGMP packets to an affected system. An exploit could allow the attacker to execute arbitrary code and gain full control of the affected system or cause the affected system to reload, resulting in a DoS condition. This vulnerability affects Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 3600 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Fabric Switches in Application Centric Infrastructure (ACI) mode, Nexus 9000 Series Switches in standalone NX-OS mode. Cisco Bug IDs: CSCuv79620, CSCvg71263.

A vulnerability in the write-erase feature of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, local attacker to configure an unauthorized administrator account for an affected device. The vulnerability exists because the affected software does not properly delete sensitive files when certain CLI commands are used to clear the device configuration and reload a device. An attacker could exploit this vulnerability by logging into an affected device as an administrative user and configuring an unauthorized account for the device. The account would not require a password for authentication and would be accessible only via a Secure Shell (SSH) connection to the device. A successful exploit could allow the attacker to configure an unauthorized account that has administrative privileges, does not require a password for authentication, and does not appear in the running configuration or the audit logs for the affected device. This vulnerability affects Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Fabric Extenders, Nexus 3500 Platform Switches, Nexus 4000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd13993, CSCvd34845, CSCvd34857, CSCvd34862, CSCvd34879, CSCve35753.

A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to execute arbitrary code or cause a denial of service (DoS) condition on an affected device. The vulnerability exists because the affected software insufficiently validates Cisco Fabric Services packet headers when the software processes packet data. An attacker could exploit this vulnerability by sending a maliciously crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow condition on the device, which could allow the attacker to execute arbitrary code or cause a DoS condition on the device. This vulnerability affects the following if configured to use Cisco Fabric Services: Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69962, CSCve02808, CSCve02810, CSCve02812, CSCve02819, CSCve02822, CSCve02831, CSCve04859.

A vulnerability in the Cisco Fabric Services (CFS) component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device. The vulnerability exists because the affected software insufficiently validates Cisco Fabric Services packet headers when the software processes packet data. An attacker could exploit this vulnerability by sending a maliciously crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow condition on the device, which could allow the attacker to execute arbitrary code on the device. This vulnerability affects the following if configured to use Cisco Fabric Services: Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69943, CSCve02429, CSCve02433, CSCve02435, CSCve02445, CSCve04859.

A vulnerability in the NX-API management application programming interface (API) in devices running, or based on, Cisco NX-OS Software could allow an authenticated, remote attacker to execute commands with elevated privileges. The vulnerability is due to a failure to properly validate certain parameters included within an NX-API request. An attacker that can successfully authenticate to the NX-API could submit a request designed to bypass NX-OS role assignment. A successful exploit could allow the attacker to execute commands with elevated privileges. This vulnerability affects the following if configured to use the NX-API feature: MDS 9000 Series Multilayer Switches, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode. Cisco Bug IDs: CSCvc73177, CSCve40903, CSCve40911.

GreenCMS 2.3.0603 allows remote attackers to obtain sensitive information via a direct request for Data/Log/year_month_day.log.

There is a heap-based buffer overflow in ReadImage in input-tga.ci in sam2p 0.49.4 that leads to a denial of service or possibly unspecified other impact.

The version control adapters component of TIBCO Data Virtualization (formerly known as Cisco Information Server) contains vulnerabilities that may allow for arbitrary command execution. Affected releases are TIBCO Data Virtualization: 7.0.5; 7.0.6.

Symantec Endpoint Protection prior to 14 RU1 MP1 or 12.1 RU6 MP10 may be susceptible to a race condition (or race hazard). This type of issue occurs in software where the output is dependent on the sequence or timing of other uncontrollable events.

Symantec Endpoint Protection prior to 14 RU1 MP1 or 12.1 RU6 MP10 could be susceptible to a privilege escalation vulnerability, which is a type of issue that allows a user to gain elevated access to resources that are normally protected at lower access levels.

On D-Link DIR-620 devices with a certain customized (by ISP) variant of firmware 1.0.3, 1.0.37, 1.3.1, 1.3.3, 1.3.7, 1.4.0, and 2.0.22, OS command injection is possible as a result of incorrect processing of the res_buf parameter to index.cgi.

In the web server on D-Link DIR-620 devices with a certain customized (by ISP) variant of firmware 1.0.3, 1.0.37, 1.3.1, 1.3.3, 1.3.7, 1.4.0, and 2.0.22, there is a hardcoded password of anonymous for the admin account.

On D-Link DIR-620 devices with a certain customized (by ISP) variant of firmware 1.0.3, 1.0.37, 1.3.1, 1.3.3, 1.3.7, 1.4.0, and 2.0.22, a reflected Cross-Site Scripting (XSS) attack is possible as a result of missed filtration for special characters in the "Search" field and incorrect processing of the XMLHttpRequest object.

CheckSec Canopy 3.x before 3.0.7 has stored XSS via the Login Page Disclaimer, allowing attacks by low-privileged users against higher-privileged users.

Multiple cross-site request forgery (CSRF) vulnerabilities in totemomail Encryption Gateway before 6.0.0_Build_371 allow remote attackers to hijack the authentication of users for requests that (1) change user settings, (2) send emails, or (3) change contact information by leveraging lack of an anti-CSRF token.

Reliable Controls MACH-ProWebCom 7.80 devices allow remote attackers to obtain sensitive information via a direct request for the data/fileinfo.xml or job/job.json file, as demonstrated the Master Password field.

An issue was discovered in the com.dropbox.android application 98.2.2 for Android. The Passcode feature allows authentication bypass via runtime manipulation that forces a certain method's return value to true. In other words, an attacker could authenticate with an arbitrary passcode. NOTE: the vendor indicates that this is not an attack of interest within the context of their threat model, which excludes Android devices on which rooting has occurred

Ubiquiti Networks EdgeSwitch version 1.7.3 and prior suffer from an externally controlled format-string vulnerability due to lack of protection on the admin CLI, leading to code execution and privilege escalation greater than administrators themselves are allowed. An attacker with access to an admin account could escape the restricted CLI and execute arbitrary code.

Ubiquiti Networks EdgeSwitch version 1.7.3 and prior suffer from an improperly neutralized element in an OS command due to lack of protection on the admin CLI, leading to code execution and privilege escalation greater than administrators themselves are allowed. An attacker with access to an admin account could escape the restricted CLI and execute arbitrary shell instructions.

An issue was discovered in the com.dropbox.android application 98.2.2 for Android. The FingerprintManager class for Biometric validation allows authentication bypass through the callback method from onAuthenticationFailed to onAuthenticationSucceeded with null, because the fingerprint API in conjunction with the Android keyGenerator class is not implemented. In other words, an attacker could authenticate with an arbitrary fingerprint. NOTE: the vendor indicates that this is not an attack of interest within the context of their threat model, which excludes Android devices on which rooting has occurred

Polycom RealPresence Web Suite before 2.2.0 does not block a user's video for a few seconds upon joining a meeting (when the user has explicitly chosen to turn off the video using a specific option). During those seconds, a meeting invitee may unknowingly be on camera with other participants able to view.

glusterfs is vulnerable to privilege escalation on gluster server nodes. An authenticated gluster client via TLS could use gluster cli with --remote-host command to add it self to trusted storage pool and perform privileged gluster operations like adding other machines to trusted storage pool, start, stop, and delete volumes.

Stack-based buffer overflow in ntpq and ntpdc of NTP version 4.2.8p11 allows an attacker to achieve code execution or escalate to higher privileges via a long string as the argument for an IPv4 or IPv6 command-line parameter. NOTE: It is unclear whether there are any common situations in which ntpq or ntpdc is used with a command line from an untrusted source.

There is an information leak vulnerability in Sprockets. Versions Affected: 4.0.0.beta7 and lower, 3.7.1 and lower, 2.12.4 and lower. Specially crafted requests can be used to access files that exists on the filesystem that is outside an application's root directory, when the Sprockets server is used in production. All users running an affected release should either upgrade or use one of the work arounds immediately.

The mobi_pk1_decrypt function in encryption.c in Libmobi 0.3 allows remote attackers to cause a denial of service (heap-based buffer overflow) or possibly have unspecified other impact via a crafted mobi file.

The mobi_decode_font_resource function in util.c in Libmobi 0.3 allows remote attackers to cause a denial of service (heap-based buffer overflow) or possibly have unspecified other impact via a crafted mobi file.

The libfsntfs_reparse_point_values_read_data function in libfsntfs_reparse_point_values.c in libfsntfs through 2018-04-20 allows remote attackers to cause an information disclosure (heap-based buffer over-read) via a crafted ntfs file. NOTE: the vendor has disputed this as described in libyal/libfsntfs issue 8 on GitHub

The libfsntfs_security_descriptor_values_free function in libfsntfs_security_descriptor_values.c in libfsntfs through 2018-04-20 allows remote attackers to cause a denial of service (double-free) via a crafted ntfs file. NOTE: the vendor has disputed this as described in libyal/libfsntfs issue 8 on GitHub

The liblnk_location_information_read_data function in liblnk_location_information.c in liblnk through 2018-04-19 allows remote attackers to cause an information disclosure (heap-based buffer over-read) via a crafted lnk file. NOTE: the vendor has disputed this as described in libyal/liblnk issue 33 on GitHub

The liblnk_data_block_read function in liblnk_data_block.c in liblnk through 2018-04-19 allows remote attackers to cause an information disclosure (heap-based buffer over-read) via a crafted lnk file. NOTE: the vendor has disputed this as described in libyal/liblnk issue 33 on GitHub

An issue was discovered in ShopNx through 2017-11-17. The vulnerability allows a remote attacker to upload any malicious file to a Node.js application. An attacker can upload a malicious HTML file that contains a JavaScript payload to steal a user's credentials.

The libpff_name_to_id_map_entry_read function in libpff_name_to_id_map.c in libyal libpff through 2018-04-28 allows remote attackers to cause an information disclosure (heap-based buffer over-read) via a crafted pff file. NOTE: the vendor has disputed this as described in libyal/libpff issue 66 on GitHub

The mobi_parse_index_entry function in index.c in Libmobi 0.3 allows remote attackers to cause an information disclosure (heap-based buffer over-read) via a crafted mobi file.

The libfsntfs_attribute_read_from_mft function in libfsntfs_attribute.c in libfsntfs through 2018-04-20 allows remote attackers to cause an information disclosure (heap-based buffer over-read) via a crafted ntfs file. NOTE: the vendor has disputed this as described in libyal/libfsntfs issue 8 on GitHub

The libfsntfs_mft_entry_read_header function in libfsntfs_mft_entry.c in libfsntfs through 2018-04-20 allows remote attackers to cause an information disclosure (heap-based buffer over-read) via a crafted ntfs file. NOTE: the vendor has disputed this as described in libyal/libfsntfs issue 8 on GitHub

The libfsntfs_mft_entry_read_attributes function in libfsntfs_mft_entry.c in libfsntfs through 2018-04-20 allows remote attackers to cause an information disclosure (heap-based buffer over-read) via a crafted ntfs file. NOTE: the vendor has disputed this as described in libyal/libfsntfs issue 8 on GitHub

Cross-site scripting (XSS) vulnerability in templates/frontend/pages/searchResults.tpl in Public Knowledge Project (PKP) Open Monograph Press (OMP) v1.2.0 through 3.1.1-2 before 3.1.1-3 allows remote attackers to inject arbitrary web script or HTML via the catalog.noTitlesSearch parameter (aka the Search field).