CVE Feed

Buffer overflow in the GetStatistics64 remote procedure call (RPC) in OpenAFS 1.4.8 before 1.6.7 allows remote attackers to cause a denial of service (crash) via a crafted statsVersion argument.

Juniper Junos 13.2 before 13.2R3 and 13.3 before 13.3R1, when PIM is enabled, allows remote attackers to cause a denial of service (kernel panic and crash) via a large number of crafted IGMP packets.

Juniper Junos before 11.4R11, 12.1 before 12.1R9, 12.2 before 12.2R7, 12.3R4 before 12.3R4-S3, 13.1 before 13.1R4, 13.2 before 13.2R2, and 13.3 before 13.3R1, as used in MX Series and T4000 routers, allows remote attackers to cause a denial of service (PFE restart) via a crafted IP packet to certain (1) Trio or (2) Cassis-based Packet Forwarding Engine (PFE) modules.

The Enhanced Web Filtering (EWF) in Juniper Junos before 10.4R15, 11.4 before 11.4R9, 12.1 before 12.1R7, 12.1X44 before 12.1X44-D20, 12.1X45 before 12.1X45-D10, and 12.1X46 before 12.1X46-D10, as used in the SRX Series services gateways, allows remote attackers to cause a denial of service (flow daemon crash and restart) via a crafted URL.

OpenAFS before 1.6.7 delays the listen thread when an RXS_CheckResponse fails, which allows remote attackers to cause a denial of service (performance degradation) via an invalid packet.

Unspecified vulnerability in Juniper Junos before 11.4R10-S1, before 11.4R11, 12.1X44 before 12.1X44-D26, 12.1X44 before 12.1X44-D30, 12.1X45 before 12.1X45-D20, and 12.1X46 before 12.1X46-D10, when Dynamic IPsec VPN is configured, allows remote attackers to cause a denial of service (new Dynamic VPN connection failures and CPU and disk consumption) via unknown vectors.

Cross-site scripting (XSS) vulnerability in J-Web in Juniper Junos before 10.0S25, 10.4 before 10.4R10, 11.4 before 11.4R11, 12.1 before 12.1R9, 12.1X44 before 12.1X44-D30, 12.1X45 before 12.1X45-D20, 12.1X46 before 12.1X46-D10, and 12.2 before 12.2R1 allows remote attackers to inject arbitrary web script or HTML via unspecified parameters to index.php.

Cross-site request forgery (CSRF) vulnerability in the admin terminal in Hawt.io allows remote attackers to hijack the authentication of arbitrary users for requests that run commands on the Karaf server, as demonstrated by running "shutdown -f."

Off-by-one error in the cmd_smart function in the smart self test in hw/ide/core.c in QEMU before 2.0 allows local users to have unspecified impact via a SMART EXECUTE OFFLINE command that triggers a buffer underflow and memory corruption.

JBoss Fuse did not enable encrypted passwords by default in its usage of Apache Zookeeper. This permitted sensitive information disclosure via logging to local users. Note: this description has been updated; previous text mistakenly identified the source of the flaw as Zookeeper. Previous text: Apache Zookeeper logs cleartext admin passwords, which allows local users to obtain sensitive information by reading the log.

The admin terminal in Hawt.io does not require authentication, which allows remote attackers to execute arbitrary commands via the k parameter.

The GIF decoder in QtGui in Qt before 5.3 allows remote attackers to cause a denial of service (NULL pointer dereference) via invalid width and height values in a GIF image.

The (1) BPF_S_ANC_NLATTR and (2) BPF_S_ANC_NLATTR_NEST extension implementations in the sk_run_filter function in net/core/filter.c in the Linux kernel through 3.14.3 do not check whether a certain length value is sufficiently large, which allows local users to cause a denial of service (integer underflow and system crash) via crafted BPF instructions. NOTE: the affected code was moved to the __skb_get_nlattr and __skb_get_nlattr_nest functions before the vulnerability was announced.

The BPF_S_ANC_NLATTR_NEST extension implementation in the sk_run_filter function in net/core/filter.c in the Linux kernel through 3.14.3 uses the reverse order in a certain subtraction, which allows local users to cause a denial of service (over-read and system crash) via crafted BPF instructions. NOTE: the affected code was moved to the __skb_get_nlattr_nest function before the vulnerability was announced.

The check_secret function in authenticate.c in rsync 3.1.0 and earlier allows remote attackers to cause a denial of service (infinite loop and CPU consumption) via a user name which does not exist in the secrets file.

The Settings module in Websense Triton Unified Security Center 7.7.3 before Hotfix 31, Web Filter 7.7.3 before Hotfix 31, Web Security 7.7.3 before Hotfix 31, Web Security Gateway 7.7.3 before Hotfix 31, and Web Security Gateway Anywhere 7.7.3 before Hotfix 31 allows remote authenticated users to read cleartext passwords by replacing type="password" with type="text" in an INPUT element in the (1) Log Database or (2) User Directories component.

The BWOCXRUN.BwocxrunCtrl.1 control contains a method named OpenUrlToBufferTimeout. This method takes a URL as a parameter and returns its contents to the caller in JavaScript. The URLs are accessed in the security context of the current browser session. The control does not perform any URL validation and allows file:// URLs that access the local disk. The method can be used to open a URL (including file URLs) and read the URLs through JavaScript. This method could also be used to reach any arbitrary URL to which the browser has access.

Cisco ONS 15454 controller cards with software 10.0 and earlier allow remote attackers to cause a denial of service (card reload) via a crafted HTTP URI, aka Bug ID CSCun06870.

Stack-based buffer overflow in a certain decryption function in qconnDoor on BlackBerry Z10 devices with software 10.1.0.2312, when developer-mode has been previously enabled, allows remote attackers to execute arbitrary code via a crafted packet in a TCP session on a wireless network.

The DNP Master Driver in the OSIsoft PI Interface before 3.1.2.54 for DNP3 allows remote attackers to cause a denial of service (interface shutdown) via a crafted TCP packet.

The DNP Master Driver in the OSIsoft PI Interface before 3.1.2.54 for DNP3 allows physically proximate attackers to cause a denial of service (interface shutdown) via crafted input over a serial line.

Multiple unspecified vulnerabilities in J2k-Codec allow remote attackers to execute arbitrary code via a crafted JPEG 2000 file.

An attacker using SQL injection may use arguments to construct queries without proper sanitization. The DBVisitor.dll is exposed through SOAP interfaces, and the exposed functions are vulnerable to SOAP injection. This may allow unexpected SQL action and access to records in the table of the software database or execution of arbitrary code.

An attacker can exploit this vulnerability by copying an overly long NodeName2 argument into a statically sized buffer on the stack to overflow the static stack buffer. An attacker may use this vulnerability to remotely execute arbitrary code.

An attacker may pass an overly long value from the AccessCode2 argument to the control to overflow the static stack buffer. The attacker may then remotely execute arbitrary code.

By providing an overly long string to the NodeName parameter, an attacker may be able to overflow the static stack buffer. The attacker may then execute code on the target device remotely.

Cisco ONS 15454 controller cards with software 9.6 and earlier allow remote attackers to cause a denial of service (flash write outage) via a TCP FIN attack that triggers file-descriptor exhaustion, aka Bug ID CSCug97315.

Cisco ONS 15454 controller cards with software 9.6 and earlier allow remote attackers to cause a denial of service (card reset) via a TCP FIN attack that triggers file-descriptor exhaustion and a failure to open a CAL pipe, aka Bug ID CSCug97348.

Unspecified vulnerability in HP Array Configuration Utility, Array Diagnostics Utility, ProLiant Array Diagnostics, and SmartSSD Wear Gauge Utility 9.40 and earlier allows local users to gain privileges via unknown vectors.

To exploit this vulnerability, the attacker sends data from the GotoCmd argument to control. If the value of the argument is overly long, the static stack buffer can be overflowed. This will allow the attacker to execute arbitrary code remotely.

An attacker may exploit this vulnerability by passing an overly long value from the AccessCode argument to the control. This will overflow the static stack buffer. The attacker may then execute code on the target device remotely.

By providing an overly long string to the UserName parameter, an attacker may be able to overflow the static stack buffer. The attacker may then execute code on the target device remotely.

The BWOCXRUN.BwocxrunCtrl.1 control contains a method named “OpenUrlToBuffer.” This method takes a URL as a parameter and returns its contents to the caller in JavaScript. The URLs are accessed in the security context of the current browser session. The control does not perform any URL validation and allows “file://” URLs that access the local disk. The method can be used to open a URL (including file URLs) and read file URLs through JavaScript. This method could also be used to reach any arbitrary URL to which the browser has access.

The BWOCXRUN.BwocxrunCtrl.1 control contains a method named “CreateProcess.” This method contains validation to ensure an attacker cannot run arbitrary command lines. After validation, the values supplied in the HTML are passed to the Windows CreateProcessA API. The validation can be bypassed allowing for running arbitrary command lines. The command line can specify running remote files (example: UNC command line). A function exists at offset 100019B0 of bwocxrun.ocx. Inside this function, there are 3 calls to strstr to check the contents of the user specified command line. If “\setup.exe,” “\bwvbprt.exe,” or “\bwvbprtl.exe” are contained in the command line (strstr returns nonzero value), the command line passes validation and is then passed to CreateProcessA.

Stack-based buffer overflow in WellinTech KingSCADA before 3.1.2.13 allows remote attackers to execute arbitrary code via a crafted packet.

EMC RSA BSAFE Micro Edition Suite (MES) 3.2.x before 3.2.6 and 4.0.x before 4.0.5 does not properly validate X.509 certificate chains, which allows man-in-the-middle attackers to spoof SSL servers via a crafted certificate chain.

VMware vSphere Client 4.0, 4.1, 5.0 before Update 3, and 5.1 before Update 2 does not properly validate updates to Client files, which allows remote attackers to trigger the downloading and execution of an arbitrary program via unspecified vectors.

VMware vSphere Client 5.0 before Update 3 and 5.1 before Update 2 does not properly validate X.509 certificates, which allows man-in-the-middle attackers to spoof SSL servers via a crafted certificate.

Directory traversal vulnerability in the apps4u@android SD Card Manager application before 20140224 for Android allows attackers to overwrite or create arbitrary files via a crafted filename.

The Modbus slave/outstation driver in the OPC Drivers 1.0.20 and earlier in IOServer OPC Server allows remote attackers to cause a denial of service (out-of-bounds read and daemon crash) via a crafted packet.

The Change Password dialog box (change_password) in Sophos Web Appliance before 3.8.2 allows remote authenticated users to change the admin user password via a crafted request.

The network interface configuration page (netinterface) in Sophos Web Appliance before 3.8.2 allows remote administrators to execute arbitrary commands via shell metacharacters in the address parameter.

Cross-site scripting (XSS) vulnerability in cgi/client.py in Roundup before 1.4.20 allows remote attackers to inject arbitrary web script or HTML via the @action parameter to support/issue1.

SQL injection vulnerability in default.asp in CIS Manager CMS allows remote attackers to execute arbitrary SQL commands via the TroncoID parameter.

A race condition in the wmi_malware_scan.nbin plugin before 201402262215 for Nessus 5.2.1 allows local users to gain privileges by replacing the dissolvable agent executable in the Windows temp directory with a Trojan horse program.

Cross-site scripting (XSS) vulnerability in the history display in Roundup before 1.4.20 allows remote attackers to inject arbitrary web script or HTML via a username, related to generating a link.

Cross-site request forgery (CSRF) vulnerability in the Stream Video Player plugin 1.4.0 for WordPress allows remote attackers to hijack the authentication of administrators for requests that change plugin settings via unspecified vectors.

Cross-site scripting (XSS) vulnerability in the Submitters list in Review Board 1.6.x before 1.6.18 and 1.7.x before 1.7.12 allows remote attackers to inject arbitrary web script or HTML via a user full name.

Cross-site scripting (XSS) vulnerability in the Lazyest Gallery plugin before 1.1.21 for WordPress allows remote attackers to inject arbitrary web script or HTML via an EXIF tag. NOTE: some of these details are obtained from third party information.

Cross-site request forgery (CSRF) vulnerability in the Content Slide plugin 1.4.2 for WordPress allows remote attackers to hijack the authentication of administrators for requests that change plugin settings via unspecified vectors.