CVE Feed

Dräger SC Monitoring devices (SC 6002XL, SC 6802XL, SC 7000, SC 8000, SC 9000 XL) contain a denial-of-service vulnerability in all software versions that allows unauthenticated attackers to reboot the monitor by sending a malformed network packet. Attackers can repeatedly send such malformed packets to disrupt patient monitoring until the device falls back to default configuration and loses network connectivity.

OP-TEE is a Trusted Execution Environment (TEE) designed as companion to a non-secure Linux kernel running on Arm; Cortex-A cores using the TrustZone technology. Starting in version 3.16.0 and prior to 4.11.0, a user-after-free (UAF) race condition exists in the shared memory teardown logic of FF-A within OP-TEE SPMC/SP flows. This only applies when OP-TEE is configured as an SPMC for S-EL0 SPs, that is, with `CFG_SECURE_PARTITION=y`. The function `sp_mem_remove()`, responsible for freeing entries in `smem->receivers` and `smem->regions`, fails to acquire the global `sp_mem_lock` before performing the `free()` operations. Concurrently, other code paths, such as `sp_mem_get_receiver()`, iterate over these same lists without holding a lock, or, like `sp_mem_is_shared()`, iterate while holding the lock but are not serialized against the unprotected `free()` in `sp_mem_remove()`. This creates a cross-thread race where a thread iterating the list can acquire a pointer to an entry (e.g., `struct sp_mem_map_region` or `struct sp_mem_receiver`), and then another thread calls `sp_mem_remove()`, freeing the object. When the first thread resumes and dereferences the pointer, it results in a Use-After-Free vulnerability. Version 4.11.0 fixes the issue.

A vulnerability in Cisco Unified Communications Manager (Unified CM) and Cisco Unified Communications Manager Session Management Edition (Unified CM SME) could allow an unauthenticated, remote attacker to conduct server-side request forgery (SSRF) attacks through an affected device. This vulnerability is due to improper input validation for specific HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to write files to the underlying operating system that could be used later to elevate to root. Note: Cisco has assigned this security advisory a Security Impact Rating (SIR) of Critical rather than High as the score indicates. The reason is that exploitation of this vulnerability could result in an attacker elevating privileges to root. Note: To exploit this vulnerability, the WebDialer service must be enabled. WebDialer is disabled by default.

A vulnerability in Cisco Finesse could allow an unauthenticated, remote attacker to load arbitrary files from remote locations into an active user session on an affected device, possibly leading to browser-based attacks. This vulnerability is due to insufficient validation of user-supplied input for HTTP requests that are sent to an affected device. An attacker who has knowledge of the address of the affected device could exploit this vulnerability by persuading a user to click a crafted link that contains the affected device address. A successful exploit could allow the attacker to conduct browser-based attacks and execute arbitrary script code in the context of the affected interface or access sensitive information on the affected device.

A vulnerability in the web-based user interface of Cisco Webex Meetings could have allowed an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack. Cisco has addressed this vulnerability in the Webex Meetings service, and no customer action is needed. This vulnerability existed because of insufficient validation of user input. Prior to this vulnerability being addressed, an attacker could have exploited this vulnerability by persuading a user to follow a malicious link. A successful exploit could have allowed the attacker to execute arbitrary script code in the browser of the targeted user or access sensitive, browser-based information.

** DUPLICATE ** This CVE Record has been rejected by the Zephyr Project CNA. CVE-2026-10772 was assigned to a vulnerability already covered by CVE-2026-2411, which was assigned earlier for the same defect: the Bluetooth GATT notify/indicate paths check the permissions of the Characteristic Declaration attribute rather than the Characteristic Value attribute, so the encryption/authentication requirements configured on the value are not enforced. Both identifiers describe the same root cause in subsys/bluetooth/host/gatt.c, fixed by the same commit (c3386f92fe81bd10dc23e6a115e6a80a7d863546). Use CVE-2026-2411 instead.

GLPI is a free asset and IT management software package. Starting in version 10.0.4 and prior to version 10.0.25, a technician can store an XSS payload in the asset locked tab. Upgrade to 10.0.25 or 11.0.7 to receive a patch.

GLPI is a free asset and IT management software package. Starting in version 0.50 and prior to versions 10.0.25 and 11.0.7, a technician can read arbitrary files inside the GLPI_DOC_DIR. Upgrade to 10.0.25 or 11.0.7 to receive a patch.

GLPI is a free asset and IT management software package. Starting in version 9.5.0 and prior to versions 10.0.25 and 11.0.7, low privilege users with access to planning can delete any object in GLPI. Upgrade to 11.0.7 or 10.0.25 to receive a patch. As a workaround, disable delete rights for User's planning.

GLPI is a free asset and IT management software package. Starting in version 0.78 and prior to versions 10.0.25 and 11.0.7, a technician can delete arbitrary files from the filesystem as long as the webserver has write rights on them. Upgrade to 10.0.25 or 11.0.7 to receive a patch.

A vulnerability in jupyter-server versions 1.12.0 through 2.17.0 allows an attacker to bypass CORS origin validation when the `allow_origin_pat` configuration is used. The issue arises from the use of `re.match()` for validating the `Origin` header, which only anchors at the start of the string. This allows attacker-controlled domains such as `trusted.example.com.evil.com` to pass validation against patterns intended to match `trusted.example.com`. The vulnerability affects multiple locations in the codebase, including CORS headers, WebSocket connections, referer validation, and login redirects, potentially enabling phishing attacks, arbitrary code execution, and unauthorized access to sensitive API responses.

backpack/crud provides Create, Read, Update & Delete (CRUD) functions for Backpack, a collection of Laravel packages that help users build custom administration panels. Versions prior to 5.0.13, 4.1.69, and 4.0.63 are vulnerable to cross-site scripting. An attacker could conduct a targeted phishing campaign, in order to trick users or admins into clicking a malicious link, which under very specific circumstances could give them information or possibly admin access. Versions 5.0.13, 4.1.69, and 4.0.63 patch the issue. As a workaround, manually look inside error views in `resources/views/errors` and output `e($exception->getMessage())` instead of `$exception->getMessage()`.

unicodedata.normalize() can take excessive CPU time when processing specially crafted Unicode input containing long runs of combining characters with alternating Canonical Combining Class values. This affects all normalization forms.

GLPI is a free asset and IT management software package. Starting in version 0.78 and prior to versions 10.0.25 and 11.0.7, an authenticated user with config READ permission can read a specific asset object. Upgrade to 11.0.7 or 10.0.25 to receive a patch.

This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

An improper limitation of a pathname to a restricted directory ('Path Traversal') vulnerability in Backup.Repository webapi component in Synology Hyper Backup before 4.1.2-4036 allows remote authenticated users with administrator privileges to write specific files containing non-sensitive information via unspecified vectors.

An improper limitation of a pathname to a restricted directory ('Path Traversal') vulnerability in Backup Task functionality in Synology Hyper Backup before 4.1.2-4036 allows remote authenticated users to write specific files via unspecified vectors.

ProjectsAndPrograms school-management-system uses predictable credentials by generating student's and teacher's passwords solely from the user’s date of birth (e.g., 12072000 for 12 July 2000). The application does not require or prompt users to change the password upon first login. This behavior allows attackers to easily guess or derive valid credentials, leading to unauthorized account access. The maintainers were notified early about this vulnerability but did not provide details regarding affected versions. The version corresponding to commit 6b6fae5 was tested and confirmed vulnerable; other versions were not tested and may also be affected.

ProjectsAndPrograms school-management-system is vulnerable to Stored Cross‑Site Scripting (XSS) in multiple attributes of students and teachers objects. An authorized attacker (e.g., a teacher or administrator) can inject malicious JavaScript that is subsequently executed in other users’ browsers. Critically, when chained with CVE‑2025‑11661, which allows unauthenticated access to backend endpoints, this vulnerability can be exploited by a remote attacker without privileges to inject and execute arbitrary JavaScript. The maintainers were notified early about this vulnerability but did not provide details regarding affected versions. The version corresponding to commit 6b6fae5 was tested and confirmed vulnerable; other versions were not tested and may also be affected.

An inclusion of functionality from untrusted control sphere vulnerability in OpenSSL configuration in Synology Active Backup for Business Recovery Media Creator before 2.5.0-2081 allows local users to execute arbitrary code via unspecified vectors.

An inclusion of functionality from untrusted control sphere vulnerability in MinGW DLL component in Synology Hyper Backup Explorer before 3.0.1-0156 allows local users to execute arbitrary code via unspecified vectors.

daphne before 4.2.2 reconstructs a raw HTTP request from Twisted's parsed headers and feeds it to autobahn for WebSocket handshake processing. Twisted does not treat \x0b, \x0c, \x1c, \x1d, \x1e, or \x85 as header line separators, but autobahn decodes header values to str and calls splitlines(). An attacker can exploit this parser differential to inject additional headers into the ASGI scope passed to the application. daphne now rejects requests with these bytes in any header value with a 400 response.

daphne before 4.2.2 did not pass maxFramePayloadSize or maxMessagePayloadSize to Autobahn's WebSocketServerFactory. Because Autobahn defaults both values to 0 (unlimited), an unauthenticated remote attacker could send arbitrarily large WebSocket messages or frames, causing excessive memory consumption and a denial of service.

An issue was discovered in Django 5.2 before 5.2.15 and 6.0 before 6.0.6. `django.utils.cache.has_vary_header()` in Django does not strip leading or trailing whitespace from `Vary` response header values before comparison, which allows remote attackers to read cached responses via requests to URLs whose responses contain whitespace-padded Vary header values. Earlier, unsupported Django series (such as 5.0.x, 4.1.x, and 3.2.x) were not evaluated and may also be affected. Django would like to thank Navid Rezazadeh for reporting this issue.

An issue was discovered in Django 5.2 before 5.2.15 and 6.0 before 6.0.6. `django.middleware.cache.UpdateCacheMiddleware` in Django does not add `Authorization` to the `Vary` response header for requests bearing that header without `Cache-Control: public`, which allows remote attackers to read private cached responses via unauthenticated requests to the same URL. Earlier, unsupported Django series (such as 5.0.x, 4.1.x, and 3.2.x) were not evaluated and may also be affected. Django would like to thank Shai Berger for reporting this issue.

An issue was discovered in Django 5.2 before 5.2.15 and 6.0 before 6.0.6. `django.middleware.cache.UpdateCacheMiddleware` in Django does not match `Cache-Control` response directives case-insensitively, which allows remote attackers to read responses that were incorrectly cached because their `Cache-Control` directives used uppercase or mixed-case values. Earlier, unsupported Django series (such as 5.0.x, 4.1.x, and 3.2.x) were not evaluated and may also be affected. Django would like to thank Ahmed Badawe for reporting this issue.

An issue was discovered in Django 6.0 before 6.0.6 and 5.2 before 5.2.15. `django.core.mail.backends.smtp.EmailBackend` in Django fails to prevent reuse of a partially-initialized connection after a failed `STARTTLS` handshake when `fail_silently=True`, which allows on-path network attackers to read email content via cleartext interception. Earlier, unsupported Django series (such as 5.0.x, 4.1.x, and 3.2.x) were not evaluated and may also be affected. Django would like to thank Kasper Dupont for reporting this issue.

An issue was discovered in Django 6.0 before 6.0.6 and 5.2 before 5.2.15. `django.http.HttpRequest.get_signed_cookie` in Django uses a non-injective salt derivation (concatenating the cookie name and salt argument), which allows a remote attacker to use a cookie in a context different from the one where it was signed, via distinct `(name, salt)` pairs that produce the same concatenation. Earlier, unsupported Django series (such as 5.0.x, 4.1.x, and 3.2.x) were not evaluated and may also be affected. Django would like to thank Peng Zhou for reporting this issue.

A cleartext transmission of sensitive information vulnerability in Synology Note Station Client before 2.2.4-703 allows man-in-the-middle attackers to obtain user credential.

A flaw was found in 389 Directory Server in the __aclp__normalize_acltxt() function of aclparse.c. A malformed ACI (Access Control Instruction) string can trigger heap-buffer-overflow writes and reads during ACI parsing. The function fails to validate that the ACI keyword has sufficient length after whitespace stripping, leading to a 1-byte out-of-bounds write and subsequent out-of-bounds reads. An authenticated user with write access to the aci attribute could send a crafted ACI value to silently corrupt heap memory in the directory server process.

An HTML injection vulnerability in the notification email for "Slow Redirect" and "Cloned Website" Canarytokens exists in Thinkst Applied Research Canarytokens, enabling Interface Manipulation, Cross-Site Scripting (XSS) in emails clients that render HTML emails. This issue affects Canarytokens: from Docker tag sha-c42435e before sha-bfda4df, from Git commit c42435e before bfda4df.

A vulnerability in the LightGlue model loading path of huggingface/transformers version 5.2.0 allows an attacker-controlled model repository to execute arbitrary code during model initialization. The issue arises because the `trust_remote_code` parameter, intended to prevent remote code execution, is overridden by untrusted serialized configuration data in a nested code path. Specifically, when loading a LightGlue model using `AutoModel.from_pretrained()` with `trust_remote_code=False`, the `LightGlueConfig` reads the `trust_remote_code` value from the untrusted `config.json` file and propagates it into nested `AutoConfig.from_pretrained()` calls. This results in the execution of attacker-provided Python modules, even when the victim explicitly disables remote code execution. The vulnerability poses a high risk for environments such as API inference servers, research notebooks, CI/CD pipelines, and model evaluation workers, potentially leading to credential theft, lateral movement, or persistence/backdoor deployment.

SWUpdate before 2026.05 is affected by a time-of-check time-of-use (TOCTOU) race condition that allows local unprivileged attackers to escalate privileges to root or install untrusted contents using a signed update.

A vulnerability has been found in cilium ebpf up to 0.21.0. This affects the function loadRawSpec of the file btf/btf.go of the component LoadCollectionSpec/LoadCollectionSpecFromReader. Such manipulation of the argument offset leads to integer overflow. The attack can only be performed from a local environment. The exploit has been disclosed to the public and may be used. The name of the patch is 533dfc82fd228bfadf42ea7180c39de7d9af47fa. A patch should be applied to remediate this issue.

A remote attacker with user privileges can exploit a stack buffer overflow in gdv-serverconfig to gain full system access as root.

A remote attacker with user privileges can exploit a stack buffer overflow in dali-devconfig to gain full system access as root.

A remote attacker with user privileges can exploit a stack buffer overflow to gain full system access as root.

The ugw-logread method allows a remote attacker with user privileges to access arbitrary local files due to insufficient validation of user-supplied input.

The ugw-logstop method allows a remote attacker with user privileges to terminate arbitrary processes due to insufficient validation of user-supplied input.

The ugw-restoreinfo method allows a remote attacker with user privileges to delete arbitrary local files due to insufficient validation of user-controlled input.

The ugw-restore method allows a remote attacker with user privileges to delete arbitrary local files due to insufficient validation of user-controlled input.

The ugw-logstop method allows a remote attacker with user privileges to delete arbitrary local files due to insufficient validation of user-controlled input.

The ugw-delete-file method allows a remote attacker with user privileges to delete arbitrary local files due to insufficient validation of user-controlled input.

The bac-scanresult method allows a remote attacker with user privileges to delete arbitrary local files due to insufficient validation of user-controlled input.

An unauthenticated remote attacker can recover a default, hard coded password from a firmware image and thus gain full access to all affected devices.

It is possible for an unauthenticated adjacent attacker to download log files of the controller, which may disclose some restricted information.

Incorrect Authorization vulnerability in ABB T-MAC Plus. This issue affects T-MAC Plus: 4.0-24.

Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in ABB T-MAC Plus. This issue affects T-MAC Plus: 4.0-24.

ZDRES-232: resolveProxyClass Not Overridden - acceptMatchers Filter Bypass via java.lang.reflect.Proxy Assessment: Fully addressed. When the serialised stream contains a TC_PROXYCLASSDESC (the marker for a java.lang.reflect.Proxy ), JDK’s ObjectInputStream.readProxyDesc() is dispatched. JDK then calls the default ObjectInputStream.resolveProxyClass(interfaces) implementation, which performs Class.forName(intf, false, latestUserDefinedLoader()) for EACH interface name and constructs the proxy class — bypassing the accepted classes list . ZDRES-233: Class.forName(name, initialize=true, classLoader) in readClassDescriptor Triggers Static Initialiser of Allow-Listed Classes Assessment: Fully addressed. For ANY class on the allow-list, deserialising a stream that names it triggers the class’s (static initialiser) BEFORE any instance is constructed. This means an attacker who supplies a class name on the allow-list (e.g., the developer wrote accept(“com.myapp.*") , attacker supplies com.myapp.SomeClass ) causes <clinit> of SomeClass — and many real-world classes have side-effecting static initialisers Both issues have been fixed.

Authorization bypass through User-Controlled key vulnerability in ABB T-MAC Plus. This issue affects T-MAC Plus: 4.0-24.