CVE Feed

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix fsck inconsistency caused by FGGC of node block During FGGC node block migration, fsck may incorrectly treat the migrated node block as fsync-written data. The reproduction scenario: root@vm:/mnt/f2fs# seq 1 2048 | xargs -n 1 ./test_sync // write inline inode and sync root@vm:/mnt/f2fs# rm -f 1 root@vm:/mnt/f2fs# sync root@vm:/mnt/f2fs# f2fs_io gc_range // move data block in sync mode and not write CP SPO, "fsck --dry-run" find inode has already checkpointed but still with DENT_BIT_SHIFT set The root cause is that GC does not clear the dentry mark and fsync mark during node block migration, leading fsck to misinterpret them as user-issued fsync writes. In BGGC mode, node block migration is handled by f2fs_sync_node_pages(), which guarantees the dentry and fsync marks are cleared before writing. This patch move the set/clear of the fsync|dentry marks into __write_node_folio to make the logic clearer, and ensures the fsync|dentry mark is cleared in FGGC.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: Fix OOB read and infinite loop in hci_le_create_big_complete_evt hci_le_create_big_complete_evt() iterates over BT_BOUND connections for a BIG handle using a while loop, accessing ev->bis_handle[i++] on each iteration. However, there is no check that i stays within ev->num_bis before the array access. When a controller sends a LE_Create_BIG_Complete event with fewer bis_handle entries than there are BT_BOUND connections for that BIG, or with num_bis=0, the loop reads beyond the valid bis_handle[] flex array into adjacent heap memory. Since the out-of-bounds values typically exceed HCI_CONN_HANDLE_MAX (0x0EFF), hci_conn_set_handle() rejects them and the connection remains in BT_BOUND state. The same connection is then found again by hci_conn_hash_lookup_big_state(), creating an infinite loop with hci_dev_lock held. Fix this by terminating the BIG if in case not all BIS could be setup properly.

In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: ADD_ADDR rtx: fix potential data-race This mptcp_pm_add_timer() helper is executed as a timer callback in softirq context. To avoid any data races, the socket lock needs to be held with bh_lock_sock(). If the socket is in use, retry again soon after, similar to what is done with the keepalive timer.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: remove station if connection prep fails If connection preparation fails for MLO connections, then the interface is completely reset to non-MLD. In this case, we must not keep the station since it's related to the link of the vif being removed. Delete an existing station. Any "new_sta" is already being removed, so that doesn't need changes. This fixes a use-after-free/double-free in debugfs if that's enabled, because a vif going from MLD (and to MLD, but that's not relevant here) recreates its entire debugfs.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: validate SVM ioctl nattr against buffer size Validate nattr field against the buffer size, preventing out-of-bounds buffer access via user-controlled attribute count. (cherry picked from commit 5eca8bfdfa456c3304ca77523718fe24254c172f)

In the Linux kernel, the following vulnerability has been resolved: batman-adv: reject new tp_meter sessions during teardown Prevent tp_meter from starting new sender or receiver sessions after mesh_state has left BATADV_MESH_ACTIVE.

In the Linux kernel, the following vulnerability has been resolved: spi: cadence-quadspi: fix unclocked access on unbind Make sure that the controller is runtime resumed before disabling it during driver unbind to avoid an unclocked register access. This issue was flagged by Sashiko when reviewing a controller deregistration fix.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn3: Prevent OOB reads when parsing dec msg Check bounds against the end of the BO whenever we access the msg.

In the Linux kernel, the following vulnerability has been resolved: spi: rspi: fix controller deregistration Make sure to deregister the controller before releasing underlying resources like DMA during driver unbind.

In the Linux kernel, the following vulnerability has been resolved: media: rc: xbox_remote: heed DMA restrictions The buffer for IO must not be part of the device structure because that violates the DMA coherency rules.

A command injection vulnerability exists in the ZeroTier VPN feature of InHand Networks IR302 firmware V3.5.108, IR305 firmware V1.0.118, IR315 firmware V1.0.118, IR615 firmware V1.0.118, and earlier versions. Attackers can exploit this vulnerability to obtain ROOT privileges on remote target devices.

A command injection vulnerability exists in the WireGuard VPN feature of InHand Networks IR302 firmware V3.5.108, IR305 firmware V1.0.118, IR315 firmware V1.0.118, IR615 firmware V1.0.118, and earlier versions. Attackers can exploit this vulnerability to obtain ROOT privileges on remote target devices.

An issue in SourceBans Material Admin before v.1.1.6 (3ecd95e) allows attackers to manipulate arbitrary user data in the web app via a crafted XAJAX call.

An arbitrary file upload vulnerability in the pages/admin.uploadmapimg.php component of SourceBans Material Admin v1.1.6 allows attackers to execute arbitrary code via uploading a crafted image file.

In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs-schemes: protect memcg_path kfree() with damon_sysfs_lock Patch series "mm/damon/sysfs-schemes: fix use-after-free for [memcg_]path". Reads of 'memcg_path' and 'path' files in DAMON sysfs interface could race with their writes, results in use-after-free. Fix those. This patch (of 2): damon_sysfs_scheme_filter->mmecg_path can be read and written by users, via DAMON sysfs memcg_path file. It can also be indirectly read, for the parameters {on,off}line committing to DAMON. The reads for parameters committing are protected by damon_sysfs_lock to avoid the sysfs files being destroyed while any of the parameters are being read. But the user-driven direct reads and writes are not protected by any lock, while the write is deallocating the memcg_path-pointing buffer. As a result, the readers could read the already freed buffer (user-after-free). Note that the user-reads don't race when the same open file is used by the writer, due to kernfs's open file locking. Nonetheless, doing the reads and writes with separate open files would be common. Fix it by protecting both the user-direct reads and writes with damon_sysfs_lock.

In the Linux kernel, the following vulnerability has been resolved: libceph: Fix slab-out-of-bounds access in auth message processing If a (potentially corrupted) message of type CEPH_MSG_AUTH_REPLY contains a positive value in its result field, it is treated as an error code by ceph_handle_auth_reply() and returned to handle_auth_reply(). Thereafter, an attempt is made to send the preallocated message of type CEPH_MSG_AUTH, where the returned value is interpreted as the size of the front segment to send. If the result value in the message is greater than the size of the memory buffer allocated for the front segment, an out-of-bounds access occurs, and the content of the memory region beyond this buffer is sent out. This patch fixes the issue by treating only negative values in the result field as errors. Positive values are therefore treated as success in the same way as a zero value. Additionally, a BUG_ON is added to __send_prepared_auth_request() comparing the len parameter to front_alloc_len to prevent sending the message if it exceeds the bounds of the allocation and to make it easier to catch any logic flaws leading to this.

In the Linux kernel, the following vulnerability has been resolved: ip6_gre: Use cached t->net in ip6erspan_changelink(). After commit 5e72ce3e3980 ("net: ipv6: Use link netns in newlink() of rtnl_link_ops"), ip6erspan_newlink() correctly resolves the per-netns ip6gre hash via link_net. ip6erspan_changelink() was not converted in that series and still uses dev_net(dev), which diverges from the device's creation netns after IFLA_NET_NS_FD migration. This re-inserts the tunnel into the wrong per-netns hash. The original netns keeps a stale entry. When that netns is later destroyed, ip6gre_exit_rtnl_net() walks the stale entry, producing a slab-use-after-free reported by KASAN, followed by a kernel BUG at net/core/dev.c (LIST_POISON1) in unregister_netdevice_many_notify(). Reachable from an unprivileged user namespace (unshare --user --map-root-user --net). ip6gre_changelink() earlier in the same file already uses the cached t->net; only ip6erspan_changelink() has the wrong shape.

In the Linux kernel, the following vulnerability has been resolved: RDMA/mana: Validate rx_hash_key_len Sashiko points out that rx_hash_key_len comes from a uAPI structure and is blindly passed to memcpy, allowing the userspace to trash kernel memory. Bounds check it so the memcpy cannot overflow.

In the Linux kernel, the following vulnerability has been resolved: powerpc/xive: fix kmemleak caused by incorrect chip_data lookup The kmemleak reports the following memory leak: Unreferenced object 0xc0000002a7fbc640 (size 64): comm "kworker/8:1", pid 540, jiffies 4294937872 hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 00 00 09 04 00 04 00 00 ................ 00 00 a7 81 00 00 0a c0 00 00 08 04 00 04 00 00 ................ backtrace (crc 177d48f6): __kmalloc_cache_noprof+0x520/0x730 xive_irq_alloc_data.constprop.0+0x40/0xe0 xive_irq_domain_alloc+0xd0/0x1b0 irq_domain_alloc_irqs_parent+0x44/0x6c pseries_irq_domain_alloc+0x1cc/0x354 irq_domain_alloc_irqs_parent+0x44/0x6c msi_domain_alloc+0xb0/0x220 irq_domain_alloc_irqs_locked+0x138/0x4d0 __irq_domain_alloc_irqs+0x8c/0xfc __msi_domain_alloc_irqs+0x214/0x4d8 msi_domain_alloc_irqs_all_locked+0x70/0xf8 pci_msi_setup_msi_irqs+0x60/0x78 __pci_enable_msix_range+0x54c/0x98c pci_alloc_irq_vectors_affinity+0x16c/0x1d4 nvme_pci_enable+0xac/0x9c0 [nvme] nvme_probe+0x340/0x764 [nvme] This occurs when allocating MSI-X vectors for an NVMe device. During allocation the XIVE code creates a struct xive_irq_data and stores it in irq_data->chip_data. When the MSI-X irqdomain is later freed, xive_irq_free_data() is responsible for retrieving this structure and freeing it. However, after commit cc0cc23babc9 ("powerpc/xive: Untangle xive from child interrupt controller drivers"), xive_irq_free_data() retrieves the chip_data using irq_get_chip_data(), which looks up the data through the child domain. This is incorrect because the XIVE-specific irq data is associated with the XIVE (parent) domain. As a result the lookup fails and the allocated struct xive_irq_data is never freed, leading to the kmemleak report shown above. Fix this by retrieving the irq_data from the correct domain using irq_domain_get_irq_data() and then accessing the chip_data via irq_data_get_irq_chip_data().

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Fix pin leak and publication ordering in __pkvm_init_vcpu() Two bugs exist in the vCPU initialisation path: 1. If a check fails after hyp_pin_shared_mem() succeeds, the cleanup path jumps to 'unlock' without calling unpin_host_vcpu() or unpin_host_sve_state(), permanently leaking pin references on the host vCPU and SVE state pages. Extract a register_hyp_vcpu() helper that performs the checks and the store. When register_hyp_vcpu() returns an error, call unpin_host_vcpu() and unpin_host_sve_state() inline before falling through to the existing 'unlock' label. 2. register_hyp_vcpu() publishes the new vCPU pointer into 'hyp_vm->vcpus[]' with a bare store, allowing a concurrent caller of pkvm_load_hyp_vcpu() to observe a partially initialised vCPU object. Ensure the store uses smp_store_release() and the load uses smp_load_acquire(). While 'vm_table_lock' currently serialises the store and the load, these barriers ensure the reader sees the fully initialised 'hyp_vcpu' object even if there were a lockless path or if the lock's own ordering guarantees were insufficient for nested object initialization.

In the Linux kernel, the following vulnerability has been resolved: openvswitch: vport: fix self-deadlock on release of tunnel ports vports are used concurrently and protected by RCU, so netdev_put() must happen after the RCU grace period. So, either in an RCU call or after the synchronize_net(). The rtnl_delete_link() must happen under RTNL and so can't be executed in RCU context. Calling synchronize_net() while holding RTNL is not a good idea for performance and system stability under load in general, so calling netdev_put() in RCU call is the right solution here. However, when the device is deleted, rtnl_unlock() will call netdev_run_todo() and block until all the references are gone. In the current code this means that we never reach the call_rcu() and the vport is never freed and the reference is never released, causing a self-deadlock on device removal. Fix that by moving the rcu_call() before the rtnl_unlock(), so the scheduled RCU callback will be executed when synchronize_net() is called from the rtnl_unlock()->netdev_run_todo() while the RTNL itself is already released.

In the Linux kernel, the following vulnerability has been resolved: mptcp: fix scheduling with atomic in timestamp sockopt Using lock_sock_fast() (atomic context) around sock_set_timestamp() and sock_set_timestamping() is unsafe, as both helpers can sleep. Replace lock_sock_fast() with sleepable lock_sock()/release_sock() to avoid scheduling while atomic panic.

In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs-schemes: protect path kfree() with damon_sysfs_lock damon_sysfs_quot_goal->path can be read and written by users, via DAMON sysfs 'path' file. It can also be indirectly read, for the parameters {on,off}line committing to DAMON. The reads for parameters committing are protected by damon_sysfs_lock to avoid the sysfs files being destroyed while any of the parameters are being read. But the user-driven direct reads and writes are not protected by any lock, while the write is deallocating the path-pointing buffer. As a result, the readers could read the already freed buffer (user-after-free). Note that the user-reads don't race when the same open file is used by the writer, due to kernfs's open file locking. Nonetheless, doing the reads and writes with separate open files would be common. Fix it by protecting both the user-direct reads and writes with damon_sysfs_lock.

In the Linux kernel, the following vulnerability has been resolved: exit: prevent preemption of oopsing TASK_DEAD task When an already-exiting task oopses, make_task_dead() currently calls do_task_dead() with preemption enabled. That is forbidden: do_task_dead() calls __schedule(), which has a comment saying "WARNING: must be called with preemption disabled!". If an oopsing task is preempted in do_task_dead(), between becoming TASK_DEAD and entering the scheduler explicitly, bad things happen: finish_task_switch() assumes that once the scheduler has switched away from a TASK_DEAD task, the task can never run again and its stack is no longer needed; but that assumption apparently doesn't hold if the dead task was preempted (the SM_PREEMPT case). This means that the scheduler ends up repeatedly dropping references on the dead task's stack, which can lead to use-after-free or double-free of the entire task stack; in other words, two tasks can end up running on the same stack, resulting in various kinds of memory corruption. (This does not just affect "recursively oopsing" tasks; it is enough to oops once during task exit, for example in a file_operations::release handler)

In the Linux kernel, the following vulnerability has been resolved: batman-adv: bla: prevent use-after-free when deleting claims When batadv_bla_del_backbone_claims() removes all claims for a backbone, it does this by dropping the link entry in the hash list. This list entry itself was one of the references which need to be dropped at the same time via batadv_claim_put(). But the batadv_claim_put() must not be done before the last access to the claim object in this function. Otherwise the claim might be freed already by the batadv_claim_release() function before the list entry was dropped.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: fix a potential clc buffer length underflow The buf_len is used to limit the iterations for retrieving the country power setting and may underflow under certain conditions due to changes in the power table in CLC. This underflow leads to an almost infinite loop or an invalid power setting resulting in driver initialization failure.

In the Linux kernel, the following vulnerability has been resolved: eventfs: Hold eventfs_mutex and SRCU when remount walks events Commit 340f0c7067a9 ("eventfs: Update all the eventfs_inodes from the events descriptor") had eventfs_set_attrs() recurse through ei->children on remount. The walk only holds the rcu_read_lock() taken by tracefs_apply_options() over tracefs_inodes, which is wrong: - list_for_each_entry over ei->children races with the list_del_rcu() in eventfs_remove_rec() -- LIST_POISON1 deref, same shape as d2603279c7d6. - eventfs_inodes are freed via call_srcu(&eventfs_srcu, ...). rcu_read_lock() does not extend an SRCU grace period, so ti->private can be reclaimed under the walk. - The writes to ei->attr race with eventfs_set_attr(), which holds eventfs_mutex. Reproducer: while :; do mount -o remount,uid=$((RANDOM%1000)) /sys/kernel/tracing; done & while :; do echo "p:kp submit_bio" > /sys/kernel/tracing/kprobe_events echo > /sys/kernel/tracing/kprobe_events done Wrap the events portion of tracefs_apply_options() in eventfs_remount_lock()/_unlock() that take eventfs_mutex and srcu_read_lock(&eventfs_srcu). eventfs_set_attrs() doesn't sleep so the nested rcu_read_lock() is fine; lockdep_assert_held() pins the contract. Comment in tracefs_drop_inode() said "RCU cycle" -- it is SRCU.

In the Linux kernel, the following vulnerability has been resolved: block: add pgmap check to biovec_phys_mergeable biovec_phys_mergeable() is used by the request merge, DMA mapping, and integrity merge paths to decide if two physically contiguous bvec segments can be coalesced into one. It currently has no check for whether the segments belong to different dev_pagemaps. When zone device memory is registered in multiple chunks, each chunk gets its own dev_pagemap. A single bio can legitimately contain bvecs from different pgmaps -- iov_iter_extract_bvecs() breaks at pgmap boundaries but the outer loop in bio_iov_iter_get_pages() continues filling the same bio. If such bvecs are physically contiguous, biovec_phys_mergeable() will coalesce them, making it impossible to recover the correct pgmap for the merged segment via page_pgmap(). Add a zone_device_pages_have_same_pgmap() check to prevent merging bvec segments that span different pgmaps.

In the Linux kernel, the following vulnerability has been resolved: ipmi:si: Return state to normal if message allocation fails There were places where nothing would get started if a message allocation failed, so the driver needs to return to normal state.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: drop stray 'static' from fast-RX rx_result ieee80211_invoke_fast_rx() is documented as safe for parallel RX, but its per-invocation rx_result is declared static. Concurrent callers then share one instance and can overwrite each other's result between ieee80211_rx_mesh_data() and the switch on res. That can make a packet that was queued or consumed by ieee80211_rx_mesh_data() fall through into ieee80211_rx_8023(), or make a packet that should continue return as queued. Make res an automatic variable so each invocation keeps its own result.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: use safe list iteration in radar detect work The call to ieee80211_dfs_cac_cancel can cause the iterated chanctx to be freed and removed from the list. Guard against this to avoid a slab-use-after-free error.

This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

In the Linux kernel, the following vulnerability has been resolved: xfrm: ah: account for ESN high bits in async callbacks AH allocates its temporary auth/ICV layout differently when ESN is enabled: the async ahash setup appends a 4-byte seqhi slot before the ICV or auth_data area, but the async completion callbacks still reconstruct the temporary layout as if seqhi were absent. With an async AH implementation selected, that makes AH copy or compare the wrong bytes on both the IPv4 and IPv6 paths. In UML repro on IPv4 AH with ESN and forced async hmac(sha1), ping fails with 100% packet loss, and the callback logs show the pre-fix drift: ah4 output_done: esn=1 err=0 icv_off=20 expected_off=24 ah4 input_done: esn=1 auth_off=20 expected_auth_off=24 icv_off=32 expected_icv_off=36 Reconstruct the callback-side layout the same way the setup path built it by skipping the ESN seqhi slot before locating the saved auth_data or ICV. Per RFC 4302, the ESN high-order 32 bits participate in the AH ICV computation, so the async callbacks must account for the seqhi slot. Post-fix, the same IPv4 AH+ESN+forced-async-hmac(sha1) UML repro shows the corrected offset (ah4 output_done: esn=1 err=0 icv_off=24 expected_off=24) and ping succeeds; net/ipv4/ah4.o and net/ipv6/ah6.o build clean at W=1. IPv6 AH+ESN was not exercised at runtime, and the change has not been tested against a real async hardware AH engine.

In the Linux kernel, the following vulnerability has been resolved: tracepoint: balance regfunc() on func_add() failure in tracepoint_add_func() When a tracepoint goes through the 0 -> 1 transition, tracepoint_add_func() invokes the subsystem's ext->regfunc() before attempting to install the new probe via func_add(). If func_add() then fails (for example, when allocate_probes() cannot allocate a new probe array under memory pressure and returns -ENOMEM), the function returns the error without calling the matching ext->unregfunc(), leaving the side effects of regfunc() behind with no installed probe to justify them. For syscall tracepoints this is particularly unpleasant: syscall_regfunc() bumps sys_tracepoint_refcount and sets SYSCALL_TRACEPOINT on every task. After a leaked failure, the refcount is stuck at a non-zero value with no consumer, and every task continues paying the syscall trace entry/exit overhead until reboot. Other subsystems providing regfunc()/unregfunc() pairs exhibit similarly scoped persistent state. Mirror the existing 1 -> 0 cleanup and call ext->unregfunc() in the func_add() error path, gated on the same condition used there so the unwind is symmetric with the registration.

In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: fix empty payload in tap skb for non-linear buffers For non-linear skbs, virtio_transport_build_skb() goes through virtio_transport_copy_nonlinear_skb() to copy the original payload in the new skb to be delivered to the vsockmon tap device. This manually initializes an iov_iter but does not set iov_iter.count. Since the iov_iter is zero-initialized, the copy length is zero and no payload is actually copied to the monitor interface, leaving data un-initialized. Fix this by removing the linear vs non-linear split and using skb_copy_datagram_iter() with iov_iter_kvec() for all cases, as vhost-vsock already does. This handles both linear and non-linear skbs, properly initializes the iov_iter, and removes the now unused virtio_transport_copy_nonlinear_skb(). While touching this code, let's also check the return value of skb_copy_datagram_iter(), even though it's unlikely to fail.

In the Linux kernel, the following vulnerability has been resolved: media: rockchip: rkcif: Add missing MUST_CONNECT flag to pads The pads missed checks for connected devices which may a null dereference when the stream is enabled. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 pc : rkcif_interface_enable_streams+0x48/0xf0 lr : rkcif_interface_enable_streams+0x44/0xf0 Call trace: rkcif_interface_enable_streams+0x48/0xf0 v4l2_subdev_enable_streams+0x26c/0x3f0 rkcif_stream_start_streaming+0x140/0x278 vb2_start_streaming+0x74/0x188 vb2_core_streamon+0xe0/0x1d8 vb2_ioctl_streamon+0x60/0xa8 v4l_streamon+0x2c/0x40 __video_do_ioctl+0x34c/0x400 video_usercopy+0x2d0/0x800 video_ioctl2+0x20/0x60 v4l2_ioctl+0x48/0x78

In the Linux kernel, the following vulnerability has been resolved: spi: mpc52xx: fix use-after-free on registration failure Make sure to disable and free the interrupts in case controller registration fails to avoid a potential use-after-free and resource leak. This issue was flagged by Sashiko when reviewing a controller deregistration fix.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Clear VRAM on allocation to prevent stale data exposure KFD VRAM allocations set AMDGPU_GEM_CREATE_VRAM_WIPE_ON_RELEASE but not AMDGPU_GEM_CREATE_VRAM_CLEARED, leaving freshly allocated VRAM with stale data from prior use observable by compute kernels. The GEM ioctl path already sets VRAM_CLEARED for all userspace allocations via amdgpu_gem_create_ioctl() and amdgpu_mode_dumb_create(). The KFD path was missing this flag, allowing stale page table remnants to leak into user buffers. This causes crashes in RCCL P2P transport where non-zero data in ptrExchange/head/tail fields corrupts the protocol handshake.

In the Linux kernel, the following vulnerability has been resolved: media: iris: Fix use-after-free in iris_release_internal_buffers() The recent change in commit 1dabf00ee206 ("media: iris: gen1: Destroy internal buffers after FW releases") introduced a regression where session_release_buf() may free the buffer. The caller, iris_release_internal_buffers(), continued to access `buffer` after the call, leading to a potential use-after-free. Fix this by setting BUF_ATTR_PENDING_RELEASE before calling session_release_buf(), and reverting the flag if the call fails. This ensures no dereference occurs after potential freeing.

In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Limit NVMe request size to 2 MiB The HBA firmware reports NVMe MDTS values based on the underlying drive capability. However, because the driver allocates a fixed 4K buffer for the PRP list, accommodating at most 512 entries, the driver supports a maximum I/O transfer size of 2 MiB. Limit max_hw_sectors to the smaller of the reported MDTS and the 2 MiB driver limit to prevent issuing oversized I/O that may lead to a kernel oops.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: virtio_bt: clamp rx length before skb_put virtbt_rx_work() calls skb_put(skb, len) where len comes directly from virtqueue_get_buf() with no validation against the buffer we posted to the device. The RX skb is allocated in virtbt_add_inbuf() and exposed to virtio as exactly 1000 bytes via sg_init_one(). Checking len against skb_tailroom(skb) is not sufficient because alloc_skb() can leave more tailroom than the 1000 bytes actually handed to the device. A malicious or buggy backend can therefore report used.len between 1001 and skb_tailroom(skb), causing skb_put() to include uninitialized kernel heap bytes that were never written by the device. The same path also accepts len == 0, in which case skb_put(skb, 0) leaves the skb empty but virtbt_rx_handle() still reads the pkt_type byte from skb->data, consuming uninitialized memory. Define VIRTBT_RX_BUF_SIZE once and reuse it in alloc_skb() and sg_init_one(), and gate virtbt_rx_work() on that same constant so the bound checked matches the buffer actually exposed to the device. Reject used.len == 0 in the same gate so an empty completion can no longer reach virtbt_rx_handle(). Use bt_dev_err_ratelimited() because the length value comes from an untrusted backend that can otherwise flood the kernel log. Same class of bug as commit c04db81cd028 ("net/9p: Fix buffer overflow in USB transport layer"), which hardened the USB 9p transport against unchecked device-reported length.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn4: Prevent OOB reads when parsing dec msg Check bounds against the end of the BO whenever we access the msg.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix btrfs_ioctl_space_info() slot_count TOCTOU which can lead to info-leak btrfs_ioctl_space_info() has a TOCTOU race between two passes over the block group RAID type lists. The first pass counts entries to determine the allocation size, then the second pass fills the buffer. The groups_sem rwlock is released between passes, allowing concurrent block group removal to reduce the entry count. When the second pass fills fewer entries than the first pass counted, copy_to_user() copies the full alloc_size bytes including trailing uninitialized kmalloc bytes to userspace. Fix by copying only total_spaces entries (the actually-filled count from the second pass) instead of alloc_size bytes, and switch to kzalloc so any future copy size mismatch cannot leak heap data.

In the Linux kernel, the following vulnerability has been resolved: 8021q: delete cleared egress QoS mappings vlan_dev_set_egress_priority() currently keeps cleared egress priority mappings in the hash as tombstones. Repeated set/clear cycles with distinct skb priorities therefore accumulate mapping nodes until device teardown and leak memory. Delete mappings when vlan_prio is cleared instead of keeping tombstones. Now that the egress mapping lists are RCU protected, the node can be unlinked safely and freed after a grace period.

In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix divide-by-zero in setup_geo() with zero far_copies setup_geo() extracts near_copies (nc) and far_copies (fc) from the user-provided layout parameter without checking for zero. When fc=0 with the "improved" far set layout selected, 'geo->far_set_size = disks / fc' triggers a divide-by-zero. Validate nc and fc immediately after extraction, returning -1 if either is zero.

In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix unlocked call to hns_roce_qp_remove() Sashiko points out that hns_roce_qp_remove() requires the caller to hold locks. The error flow in hns_roce_create_qp_common() doesn't hold those locks for the error unwind so it risks corrupting memory. Grab the same locks the other two callers use.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: fix potential UAF in create_big_sync Add hci_conn_valid() check in create_big_sync() to detect stale connections before proceeding with BIG creation. Handle the resulting -ECANCELED in create_big_complete() and re-validate the connection under hci_dev_lock() before dereferencing, matching the pattern used by create_le_conn_complete() and create_pa_complete(). Keep the hci_conn object alive across the async boundary by taking a reference via hci_conn_get() when queueing create_big_sync(), and dropping it in the completion callback. The refcount and the lock are complementary: the refcount keeps the object allocated, while hci_dev_lock() serializes hci_conn_hash_del()'s list_del_rcu() on hdev->conn_hash, as required by hci_conn_del(). hci_conn_put() is called outside hci_dev_unlock() so the final put (which resolves to kfree() via bt_link_release) does not run under hdev->lock, though the release path would be safe either way. Without this, create_big_complete() would unconditionally dereference the conn pointer on error, causing a use-after-free via hci_connect_cfm() and hci_conn_del().

This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

In the Linux kernel, the following vulnerability has been resolved: media: saa7164: add ioremap return checks and cleanups Add checks for ioremap return values in saa7164_dev_setup(). If ioremap for BAR0 or BAR2 fails, release the already allocated PCI memory regions, remove the device from the global list, decrement the device count, and return -ENODEV. This prevents potential null pointer dereferences and ensures proper cleanup on memory mapping failures.

In the Linux kernel, the following vulnerability has been resolved: batman-adv: bla: put backbone reference on failed claim hash insert When batadv_bla_add_claim() fails to insert a new claim into the hash, it leaked a reference to the backbone_gw for which the claim was intended. Call batadv_backbone_gw_put() on the error path to release the reference and avoid leaking the backbone_gw object.