CVE Feed

In the Linux kernel, the following vulnerability has been resolved: drm/tests: shmem: Hold reservation lock around madvise Acquire and release the GEM object's reservation lock around calls to the object's madvide operation. The tests use drm_gem_shmem_madvise_locked(), which led to errors such as show below. [ 58.339389] WARNING: CPU: 1 PID: 1352 at drivers/gpu/drm/drm_gem_shmem_helper.c:499 drm_gem_shmem_madvise_locked+0xde/0x140 Only export the new helper drm_gem_shmem_madvise() for Kunit tests. This is not an interface for regular drivers.

In the Linux kernel, the following vulnerability has been resolved: drm: renesas: rz-du: mipi_dsi: fix kernel panic when rebooting for some panels Since commit 56de5e305d4b ("clk: renesas: r9a07g044: Add MSTOP for RZ/G2L") we may get the following kernel panic, for some panels, when rebooting: systemd-shutdown[1]: Rebooting. Call trace: ... do_serror+0x28/0x68 el1h_64_error_handler+0x34/0x50 el1h_64_error+0x6c/0x70 rzg2l_mipi_dsi_host_transfer+0x114/0x458 (P) mipi_dsi_device_transfer+0x44/0x58 mipi_dsi_dcs_set_display_off_multi+0x9c/0xc4 ili9881c_unprepare+0x38/0x88 drm_panel_unprepare+0xbc/0x108 This happens for panels that need to send MIPI-DSI commands in their unprepare() callback. Since the MIPI-DSI interface is stopped at that point, rzg2l_mipi_dsi_host_transfer() triggers the kernel panic. Fix by moving rzg2l_mipi_dsi_stop() to new callback function rzg2l_mipi_dsi_atomic_post_disable(). With this change we now have the correct power-down/stop sequence: systemd-shutdown[1]: Rebooting. rzg2l-mipi-dsi 10850000.dsi: rzg2l_mipi_dsi_atomic_disable(): entry ili9881c-dsi 10850000.dsi.0: ili9881c_unprepare(): entry rzg2l-mipi-dsi 10850000.dsi: rzg2l_mipi_dsi_atomic_post_disable(): entry reboot: Restarting system

In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Fix kthread worker destruction in polling mode Fix the cleanup order in polling mode (irq < 0) to prevent kernel warnings during module removal. Cancel the hrtimer before destroying the kthread worker to ensure work queues are empty. In polling mode, the driver uses hrtimer to periodically trigger wave5_vpu_timer_callback() which queues work via kthread_queue_work(). The kthread_destroy_worker() function validates that both work queues are empty with WARN_ON(!list_empty(&worker->work_list)) and WARN_ON(!list_empty(&worker->delayed_work_list)). The original code called kthread_destroy_worker() before hrtimer_cancel(), creating a race condition where the timer could fire during worker destruction and queue new work, triggering the WARN_ON. This causes the following warning on every module unload in polling mode: ------------[ cut here ]------------ WARNING: CPU: 2 PID: 1034 at kernel/kthread.c:1430 kthread_destroy_worker+0x84/0x98 Modules linked in: wave5(-) rpmsg_ctrl rpmsg_char ... Call trace: kthread_destroy_worker+0x84/0x98 wave5_vpu_remove+0xc8/0xe0 [wave5] platform_remove+0x30/0x58 ... ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: drm/tests: shmem: Hold reservation lock around vmap/vunmap Acquire and release the GEM object's reservation lock around vmap and vunmap operations. The tests use vmap_locked, which led to errors such as show below. [ 122.292030] WARNING: CPU: 3 PID: 1413 at drivers/gpu/drm/drm_gem_shmem_helper.c:390 drm_gem_shmem_vmap_locked+0x3a3/0x6f0 [ 122.468066] WARNING: CPU: 3 PID: 1413 at drivers/gpu/drm/drm_gem_shmem_helper.c:293 drm_gem_shmem_pin_locked+0x1fe/0x350 [ 122.563504] WARNING: CPU: 3 PID: 1413 at drivers/gpu/drm/drm_gem_shmem_helper.c:234 drm_gem_shmem_get_pages_locked+0x23c/0x370 [ 122.662248] WARNING: CPU: 2 PID: 1413 at drivers/gpu/drm/drm_gem_shmem_helper.c:452 drm_gem_shmem_vunmap_locked+0x101/0x330 Only export the new vmap/vunmap helpers for Kunit tests. These are not interfaces for regular drivers.

In the Linux kernel, the following vulnerability has been resolved: drm/tests: shmem: Hold reservation lock around purge Acquire and release the GEM object's reservation lock around calls to the object's purge operation. The tests use drm_gem_shmem_purge_locked(), which led to errors such as show below. [ 58.709128] WARNING: CPU: 1 PID: 1354 at drivers/gpu/drm/drm_gem_shmem_helper.c:515 drm_gem_shmem_purge_locked+0x51c/0x740 Only export the new helper drm_gem_shmem_purge() for Kunit tests. This is not an interface for regular drivers.

RayVentory Scan Engine through 12.6 Update 8 allows attackers to gain privileges if they control the value of the PATH environment variable. NOTE: this is disputed because ability of an attacker to control the environment is a site-specific misconfiguration.

Netgate pfSense CE 2.8.0 allows code execution in the XMLRPC API via pfsense.exec_php. NOTE: the Supplier disputes this because the API call is only available to admins and they are intentionally allowed to execute PHP code.

Alkacon OpenCms before 10.5.1 allows remote unauthenticated attackers to obtain sensitive information via a cmis-online/query XXE attack on a Chemistry servlet.

Alkacon OpenCms before 16 allows XXE when the <!DOCTYPE> refers to an external host.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: RX, Fix XDP multi-buf frag counting for striding RQ XDP multi-buf programs can modify the layout of the XDP buffer when the program calls bpf_xdp_pull_data() or bpf_xdp_adjust_tail(). The referenced commit in the fixes tag corrected the assumption in the mlx5 driver that the XDP buffer layout doesn't change during a program execution. However, this fix introduced another issue: the dropped fragments still need to be counted on the driver side to avoid page fragment reference counting issues. The issue was discovered by the drivers/net/xdp.py selftest, more specifically the test_xdp_native_tx_mb: - The mlx5 driver allocates a page_pool page and initializes it with a frag counter of 64 (pp_ref_count=64) and the internal frag counter to 0. - The test sends one packet with no payload. - On RX (mlx5e_skb_from_cqe_mpwrq_nonlinear()), mlx5 configures the XDP buffer with the packet data starting in the first fragment which is the page mentioned above. - The XDP program runs and calls bpf_xdp_pull_data() which moves the header into the linear part of the XDP buffer. As the packet doesn't contain more data, the program drops the tail fragment since it no longer contains any payload (pp_ref_count=63). - mlx5 device skips counting this fragment. Internal frag counter remains 0. - mlx5 releases all 64 fragments of the page but page pp_ref_count is 63 => negative reference counting error. Resulting splat during the test: WARNING: CPU: 0 PID: 188225 at ./include/net/page_pool/helpers.h:297 mlx5e_page_release_fragmented.isra.0+0xbd/0xe0 [mlx5_core] Modules linked in: [...] CPU: 0 UID: 0 PID: 188225 Comm: ip Not tainted 6.18.0-rc7_for_upstream_min_debug_2025_12_08_11_44 #1 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5e_page_release_fragmented.isra.0+0xbd/0xe0 [mlx5_core] [...] Call Trace: <TASK> mlx5e_free_rx_mpwqe+0x20a/0x250 [mlx5_core] mlx5e_dealloc_rx_mpwqe+0x37/0xb0 [mlx5_core] mlx5e_free_rx_descs+0x11a/0x170 [mlx5_core] mlx5e_close_rq+0x78/0xa0 [mlx5_core] mlx5e_close_queues+0x46/0x2a0 [mlx5_core] mlx5e_close_channel+0x24/0x90 [mlx5_core] mlx5e_close_channels+0x5d/0xf0 [mlx5_core] mlx5e_safe_switch_params+0x2ec/0x380 [mlx5_core] mlx5e_change_mtu+0x11d/0x490 [mlx5_core] mlx5e_change_nic_mtu+0x19/0x30 [mlx5_core] netif_set_mtu_ext+0xfc/0x240 do_setlink.isra.0+0x226/0x1100 rtnl_newlink+0x7a9/0xba0 rtnetlink_rcv_msg+0x220/0x3c0 netlink_rcv_skb+0x4b/0xf0 netlink_unicast+0x255/0x380 netlink_sendmsg+0x1f3/0x420 __sock_sendmsg+0x38/0x60 ____sys_sendmsg+0x1e8/0x240 ___sys_sendmsg+0x7c/0xb0 [...] __sys_sendmsg+0x5f/0xb0 do_syscall_64+0x55/0xc70 The problem applies for XDP_PASS as well which is handled in a different code path in the driver. This patch fixes the issue by doing page frag counting on all the original XDP buffer fragments for all relevant XDP actions (XDP_TX , XDP_REDIRECT and XDP_PASS). This is basically reverting to the original counting before the commit in the fixes tag. As frag_page is still pointing to the original tail, the nr_frags parameter to xdp_update_skb_frags_info() needs to be calculated in a different way to reflect the new nr_frags.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SMP: force responder MITM requirements before building the pairing response smp_cmd_pairing_req() currently builds the pairing response from the initiator auth_req before enforcing the local BT_SECURITY_HIGH requirement. If the initiator omits SMP_AUTH_MITM, the response can also omit it even though the local side still requires MITM. tk_request() then sees an auth value without SMP_AUTH_MITM and may select JUST_CFM, making method selection inconsistent with the pairing policy the responder already enforces. When the local side requires HIGH security, first verify that MITM can be achieved from the IO capabilities and then force SMP_AUTH_MITM in the response in both rsp.auth_req and auth. This keeps the responder auth bits and later method selection aligned.

In the Linux kernel, the following vulnerability has been resolved: drm/amd: Fix a few more NULL pointer dereference in device cleanup I found a few more paths that cleanup fails due to a NULL version pointer on unsupported hardware. Add NULL checks as applicable. (cherry picked from commit f5a05f8414fc10f307eb965f303580c7778f8dd2)

In the Linux kernel, the following vulnerability has been resolved: net/tcp-md5: Fix MAC comparison to be constant-time To prevent timing attacks, MACs need to be compared in constant time. Use the appropriate helper function for this.

In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: clear walk_control on inactive context in damos_walk() damos_walk() sets ctx->walk_control to the caller-provided control structure before checking whether the context is running. If the context is inactive (damon_is_running() returns false), the function returns -EINVAL without clearing ctx->walk_control. This leaves a dangling pointer to a stack-allocated structure that will be freed when the caller returns. This is structurally identical to the bug fixed in commit f9132fbc2e83 ("mm/damon/core: remove call_control in inactive contexts") for damon_call(), which had the same pattern of linking a control object and returning an error without unlinking it. The dangling walk_control pointer can cause: 1. Use-after-free if the context is later started and kdamond    dereferences ctx->walk_control (e.g., in damos_walk_cancel()    which writes to control->canceled and calls complete()) 2. Permanent -EBUSY from subsequent damos_walk() calls, since the    stale pointer is non-NULL Nonetheless, the real user impact is quite restrictive. The use-after-free is impossible because there is no damos_walk() callers who starts the context later. The permanent -EBUSY can actually confuse users, as DAMON is not running. But the symptom is kept only while the context is turned off. Turning it on again will make DAMON internally uses a newly generated damon_ctx object that doesn't have the invalid damos_walk_control pointer, so everything will work fine again. Fix this by clearing ctx->walk_control under walk_control_lock before returning -EINVAL, mirroring the fix pattern from f9132fbc2e83.

In the Linux kernel, the following vulnerability has been resolved: nstree: tighten permission checks for listing Even privileged services should not necessarily be able to see other privileged service's namespaces so they can't leak information to each other. Use may_see_all_namespaces() helper that centralizes this policy until the nstree adapts.

In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix starvation of scx_enable() under fair-class saturation During scx_enable(), the READY -> ENABLED task switching loop changes the calling thread's sched_class from fair to ext. Since fair has higher priority than ext, saturating fair-class workloads can indefinitely starve the enable thread, hanging the system. This was introduced when the enable path switched from preempt_disable() to scx_bypass() which doesn't protect against fair-class starvation. Note that the original preempt_disable() protection wasn't complete either - in partial switch modes, the calling thread could still be starved after preempt_enable() as it may have been switched to ext class. Fix it by offloading the enable body to a dedicated system-wide RT (SCHED_FIFO) kthread which cannot be starved by either fair or ext class tasks. scx_enable() lazily creates the kthread on first use and passes the ops pointer through a struct scx_enable_cmd containing the kthread_work, then synchronously waits for completion. The workfn runs on a different kthread from sch->helper (which runs disable_work), so it can safely flush disable_work on the error path without deadlock.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/userq: Fix reference leak in amdgpu_userq_wait_ioctl Drop reference to syncobj and timeline fence when aborting the ioctl due output array being too small. (cherry picked from commit 68951e9c3e6bb22396bc42ef2359751c8315dd27)

In the Linux kernel, the following vulnerability has been resolved: cpufreq: intel_pstate: Fix NULL pointer dereference in update_cpu_qos_request() The update_cpu_qos_request() function attempts to initialize the 'freq' variable by dereferencing 'cpudata' before verifying if the 'policy' is valid. This issue occurs on systems booted with the "nosmt" parameter, where all_cpu_data[cpu] is NULL for the SMT sibling threads. As a result, any call to update_qos_requests() will result in a NULL pointer dereference as the code will attempt to access pstate.turbo_freq using the NULL cpudata pointer. Also, pstate.turbo_freq may be updated by intel_pstate_get_hwp_cap() after initializing the 'freq' variable, so it is better to defer the 'freq' until intel_pstate_get_hwp_cap() has been called. Fix this by deferring the 'freq' assignment until after the policy and driver_data have been validated. [ rjw: Added one paragraph to the changelog ]

In the Linux kernel, the following vulnerability has been resolved: ceph: add a bunch of missing ceph_path_info initializers ceph_mdsc_build_path() must be called with a zero-initialized ceph_path_info parameter, or else the following ceph_mdsc_free_path_info() may crash. Example crash (on Linux 6.18.12): virt_to_cache: Object is not a Slab page! WARNING: CPU: 184 PID: 2871736 at mm/slub.c:6732 kmem_cache_free+0x316/0x400 [...] Call Trace: [...] ceph_open+0x13d/0x3e0 do_dentry_open+0x134/0x480 vfs_open+0x2a/0xe0 path_openat+0x9a3/0x1160 [...] cache_from_obj: Wrong slab cache. names_cache but object is from ceph_inode_info WARNING: CPU: 184 PID: 2871736 at mm/slub.c:6746 kmem_cache_free+0x2dd/0x400 [...] kernel BUG at mm/slub.c:634! Oops: invalid opcode: 0000 [#1] SMP NOPTI RIP: 0010:__slab_free+0x1a4/0x350 Some of the ceph_mdsc_build_path() callers had initializers, but others had not, even though they were all added by commit 15f519e9f883 ("ceph: fix race condition validating r_parent before applying state"). The ones without initializer are suspectible to random crashes. (I can imagine it could even be possible to exploit this bug to elevate privileges.) Unfortunately, these Ceph functions are undocumented and its semantics can only be derived from the code. I see that ceph_mdsc_build_path() initializes the structure only on success, but not on error. Calling ceph_mdsc_free_path_info() after a failed ceph_mdsc_build_path() call does not even make sense, but that's what all callers do, and for it to be safe, the structure must be zero-initialized. The least intrusive approach to fix this is therefore to add initializers everywhere.

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Completely fix fcport double free In qla24xx_els_dcmd_iocb() sp->free is set to qla2x00_els_dcmd_sp_free(). When an error happens, this function is called by qla2x00_sp_release(), when kref_put() releases the first and the last reference. qla2x00_els_dcmd_sp_free() frees fcport by calling qla2x00_free_fcport(). Doing it one more time after kref_put() is a bad idea.

In the Linux kernel, the following vulnerability has been resolved: kexec: derive purgatory entry from symbol kexec_load_purgatory() derives image->start by locating e_entry inside an SHF_EXECINSTR section. If the purgatory object contains multiple executable sections with overlapping sh_addr, the entrypoint check can match more than once and trigger a WARN. Derive the entry section from the purgatory_start symbol when present and compute image->start from its final placement. Keep the existing e_entry fallback for purgatories that do not expose the symbol. WARNING: kernel/kexec_file.c:1009 at kexec_load_purgatory+0x395/0x3c0, CPU#10: kexec/1784 Call Trace: <TASK> bzImage64_load+0x133/0xa00 __do_sys_kexec_file_load+0x2b3/0x5c0 do_syscall_64+0x81/0x610 entry_SYSCALL_64_after_hwframe+0x76/0x7e [[email protected]: move helper to avoid forward declaration, per Baoquan]

In the Linux kernel, the following vulnerability has been resolved: bpf: crypto: Use the correct destructor kfunc type With CONFIG_CFI enabled, the kernel strictly enforces that indirect function calls use a function pointer type that matches the target function. I ran into the following type mismatch when running BPF self-tests: CFI failure at bpf_obj_free_fields+0x190/0x238 (target: bpf_crypto_ctx_release+0x0/0x94; expected type: 0xa488ebfc) Internal error: Oops - CFI: 00000000f2008228 [#1] SMP ... As bpf_crypto_ctx_release() is also used in BPF programs and using a void pointer as the argument would make the verifier unhappy, add a simple stub function with the correct type and register it as the destructor kfunc instead.

In the Linux kernel, the following vulnerability has been resolved: md raid: fix hang when stopping arrays with metadata through dm-raid When using device-mapper's dm-raid target, stopping a RAID array can cause the system to hang under specific conditions. This occurs when: - A dm-raid managed device tree is suspended from top to bottom (the top-level RAID device is suspended first, followed by its underlying metadata and data devices) - The top-level RAID device is then removed Removing the top-level device triggers a hang in the following sequence: the dm-raid destructor calls md_stop(), which tries to flush the write-intent bitmap by writing to the metadata sub-devices. However, these devices are already suspended, making them unable to complete the write-intent operations and causing an indefinite block. Fix: - Prevent bitmap flushing when md_stop() is called from dm-raid destructor context and avoid a quiescing/unquescing cycle which could also cause I/O - Still allow write-intent bitmap flushing when called from dm-raid suspend context This ensures that RAID array teardown can complete successfully even when the underlying devices are in a suspended state. This second patch uses md_is_rdwr() to distinguish between suspend and destructor paths as elaborated on above.

In the Linux kernel, the following vulnerability has been resolved: iio: proximity: hx9023s: Protect against division by zero in set_samp_freq Avoid division by zero when sampling frequency is unspecified.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix transaction abort when snapshotting received subvolumes Currently a user can trigger a transaction abort by snapshotting a previously received snapshot a bunch of times until we reach a BTRFS_UUID_KEY_RECEIVED_SUBVOL item overflow (the maximum item size we can store in a leaf). This is very likely not common in practice, but if it happens, it turns the filesystem into RO mode. The snapshot, send and set_received_subvol and subvol_setflags (used by receive) don't require CAP_SYS_ADMIN, just inode_owner_or_capable(). A malicious user could use this to turn a filesystem into RO mode and disrupt a system. Reproducer script: $ cat test.sh #!/bin/bash DEV=/dev/sdi MNT=/mnt/sdi # Use smallest node size to make the test faster. mkfs.btrfs -f --nodesize 4K $DEV mount $DEV $MNT # Create a subvolume and set it to RO so that it can be used for send. btrfs subvolume create $MNT/sv touch $MNT/sv/foo btrfs property set $MNT/sv ro true # Send and receive the subvolume into snaps/sv. mkdir $MNT/snaps btrfs send $MNT/sv | btrfs receive $MNT/snaps # Now snapshot the received subvolume, which has a received_uuid, a # lot of times to trigger the leaf overflow. total=500 for ((i = 1; i <= $total; i++)); do echo -ne "\rCreating snapshot $i/$total" btrfs subvolume snapshot -r $MNT/snaps/sv $MNT/snaps/sv_$i > /dev/null done echo umount $MNT When running the test: $ ./test.sh (...) Create subvolume '/mnt/sdi/sv' At subvol /mnt/sdi/sv At subvol sv Creating snapshot 496/500ERROR: Could not create subvolume: Value too large for defined data type Creating snapshot 497/500ERROR: Could not create subvolume: Read-only file system Creating snapshot 498/500ERROR: Could not create subvolume: Read-only file system Creating snapshot 499/500ERROR: Could not create subvolume: Read-only file system Creating snapshot 500/500ERROR: Could not create subvolume: Read-only file system And in dmesg/syslog: $ dmesg (...) [251067.627338] BTRFS warning (device sdi): insert uuid item failed -75 (0x4628b21c4ac8d898, 0x2598bee2b1515c91) type 252! [251067.629212] ------------[ cut here ]------------ [251067.630033] BTRFS: Transaction aborted (error -75) [251067.630871] WARNING: fs/btrfs/transaction.c:1907 at create_pending_snapshot.cold+0x52/0x465 [btrfs], CPU#10: btrfs/615235 [251067.632851] Modules linked in: btrfs dm_zero (...) [251067.644071] CPU: 10 UID: 0 PID: 615235 Comm: btrfs Tainted: G W 6.19.0-rc8-btrfs-next-225+ #1 PREEMPT(full) [251067.646165] Tainted: [W]=WARN [251067.646733] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014 [251067.648735] RIP: 0010:create_pending_snapshot.cold+0x55/0x465 [btrfs] [251067.649984] Code: f0 48 0f (...) [251067.653313] RSP: 0018:ffffce644908fae8 EFLAGS: 00010292 [251067.653987] RAX: 00000000ffffff01 RBX: ffff8e5639e63a80 RCX: 00000000ffffffd3 [251067.655042] RDX: ffff8e53faa76b00 RSI: 00000000ffffffb5 RDI: ffffffffc0919750 [251067.656077] RBP: ffffce644908fbd8 R08: 0000000000000000 R09: ffffce644908f820 [251067.657068] R10: ffff8e5adc1fffa8 R11: 0000000000000003 R12: ffff8e53c0431bd0 [251067.658050] R13: ffff8e5414593600 R14: ffff8e55efafd000 R15: 00000000ffffffb5 [251067.659019] FS: 00007f2a4944b3c0(0000) GS:ffff8e5b27dae000(0000) knlGS:0000000000000000 [251067.660115] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [251067.660943] CR2: 00007ffc5aa57898 CR3: 00000005813a2003 CR4: 0000000000370ef0 [251067.661972] Call Trace: [251067.662292] <TASK> [251067.662653] create_pending_snapshots+0x97/0xc0 [btrfs] [251067.663413] btrfs_commit_transaction+0x26e/0xc00 [btrfs] [251067.664257] ? btrfs_qgroup_convert_reserved_meta+0x35/0x390 [btrfs] [251067.665238] ? _raw_spin_unlock+0x15/0x30 [251067.665837] ? record_root_ ---truncated---

In the Linux kernel, the following vulnerability has been resolved: xfs: fix undersized l_iclog_roundoff values If the superblock doesn't list a log stripe unit, we set the incore log roundoff value to 512. This leads to corrupt logs and unmountable filesystems in generic/617 on a disk with 4k physical sectors... XFS (sda1): Mounting V5 Filesystem ff3121ca-26e6-4b77-b742-aaff9a449e1c XFS (sda1): Torn write (CRC failure) detected at log block 0x318e. Truncating head block from 0x3197. XFS (sda1): failed to locate log tail XFS (sda1): log mount/recovery failed: error -74 XFS (sda1): log mount failed XFS (sda1): Mounting V5 Filesystem ff3121ca-26e6-4b77-b742-aaff9a449e1c XFS (sda1): Ending clean mount ...on the current xfsprogs for-next which has a broken mkfs. xfs_info shows this... meta-data=/dev/sda1 isize=512 agcount=4, agsize=644992 blks = sectsz=4096 attr=2, projid32bit=1 = crc=1 finobt=1, sparse=1, rmapbt=1 = reflink=1 bigtime=1 inobtcount=1 nrext64=1 = exchange=1 metadir=1 data = bsize=4096 blocks=2579968, imaxpct=25 = sunit=0 swidth=0 blks naming =version 2 bsize=4096 ascii-ci=0, ftype=1, parent=1 log =internal log bsize=4096 blocks=16384, version=2 = sectsz=4096 sunit=0 blks, lazy-count=1 realtime =none extsz=4096 blocks=0, rtextents=0 = rgcount=0 rgsize=268435456 extents = zoned=0 start=0 reserved=0 ...observe that the log section has sectsz=4096 sunit=0, which means that the roundoff factor is 512, not 4096 as you'd expect. We should fix mkfs not to generate broken filesystems, but anyone can fuzz the ondisk superblock so we should be more cautious. I think the inadequate logic predates commit a6a65fef5ef8d0, but that's clearly going to require a different backport.

In the Linux kernel, the following vulnerability has been resolved: batman-adv: Avoid double-rtnl_lock ELP metric worker batadv_v_elp_get_throughput() might be called when the RTNL lock is already held. This could be problematic when the work queue item is cancelled via cancel_delayed_work_sync() in batadv_v_elp_iface_disable(). In this case, an rtnl_lock() would cause a deadlock. To avoid this, rtnl_trylock() was used in this function to skip the retrieval of the ethtool information in case the RTNL lock was already held. But for cfg80211 interfaces, batadv_get_real_netdev() was called - which also uses rtnl_lock(). The approach for __ethtool_get_link_ksettings() must also be used instead and the lockless version __batadv_get_real_netdev() has to be called.

In the Linux kernel, the following vulnerability has been resolved: kthread: consolidate kthread exit paths to prevent use-after-free Guillaume reported crashes via corrupted RCU callback function pointers during KUnit testing. The crash was traced back to the pidfs rhashtable conversion which replaced the 24-byte rb_node with an 8-byte rhash_head in struct pid, shrinking it from 160 to 144 bytes. struct kthread (without CONFIG_BLK_CGROUP) is also 144 bytes. With CONFIG_SLAB_MERGE_DEFAULT and SLAB_HWCACHE_ALIGN both round up to 192 bytes and share the same slab cache. struct pid.rcu.func and struct kthread.affinity_node both sit at offset 0x78. When a kthread exits via make_task_dead() it bypasses kthread_exit() and misses the affinity_node cleanup. free_kthread_struct() frees the memory while the node is still linked into the global kthread_affinity_list. A subsequent list_del() by another kthread writes through dangling list pointers into the freed and reused memory, corrupting the pid's rcu.func pointer. Instead of patching free_kthread_struct() to handle the missed cleanup, consolidate all kthread exit paths. Turn kthread_exit() into a macro that calls do_exit() and add kthread_do_exit() which is called from do_exit() for any task with PF_KTHREAD set. This guarantees that kthread-specific cleanup always happens regardless of the exit path - make_task_dead(), direct do_exit(), or kthread_exit(). Replace __to_kthread() with a new tsk_is_kthread() accessor in the public header. Export do_exit() since module code using the kthread_exit() macro now needs it directly.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix chunk map leak in btrfs_map_block() after btrfs_chunk_map_num_copies() Fix a chunk map leak in btrfs_map_block(): if we return early with -EINVAL, we're not freeing the chunk map that we've just looked up.

In the Linux kernel, the following vulnerability has been resolved: libceph: Use u32 for non-negative values in ceph_monmap_decode() This patch fixes unnecessary implicit conversions that change signedness of blob_len and num_mon in ceph_monmap_decode(). Currently blob_len and num_mon are (signed) int variables. They are used to hold values that are always non-negative and get assigned in ceph_decode_32_safe(), which is meant to assign u32 values. Both variables are subsequently used as unsigned values, and the value of num_mon is further assigned to monmap->num_mon, which is of type u32. Therefore, both variables should be of type u32. This is especially relevant for num_mon. If the value read from the incoming message is very large, it is interpreted as a negative value, and the check for num_mon > CEPH_MAX_MON does not catch it. This leads to the attempt to allocate a very large chunk of memory for monmap, which will most likely fail. In this case, an unnecessary attempt to allocate memory is performed, and -ENOMEM is returned instead of -EINVAL.

In the Linux kernel, the following vulnerability has been resolved: powerpc, perf: Check that current->mm is alive before getting user callchain It may happen that mm is already released, which leads to kernel panic. This adds the NULL check for current->mm, similarly to commit 20afc60f892d ("x86, perf: Check that current->mm is alive before getting user callchain"). I was getting this panic when running a profiling BPF program (profile.py from bcc-tools): [26215.051935] Kernel attempted to read user page (588) - exploit attempt? (uid: 0) [26215.051950] BUG: Kernel NULL pointer dereference on read at 0x00000588 [26215.051952] Faulting instruction address: 0xc00000000020fac0 [26215.051957] Oops: Kernel access of bad area, sig: 11 [#1] [...] [26215.052049] Call Trace: [26215.052050] [c000000061da6d30] [c00000000020fc10] perf_callchain_user_64+0x2d0/0x490 (unreliable) [26215.052054] [c000000061da6dc0] [c00000000020f92c] perf_callchain_user+0x1c/0x30 [26215.052057] [c000000061da6de0] [c0000000005ab2a0] get_perf_callchain+0x100/0x360 [26215.052063] [c000000061da6e70] [c000000000573bc8] bpf_get_stackid+0x88/0xf0 [26215.052067] [c000000061da6ea0] [c008000000042258] bpf_prog_16d4ab9ab662f669_do_perf_event+0xf8/0x274 [...] In addition, move storing the top-level stack entry to generic perf_callchain_user to make sure the top-evel entry is always captured, even if current->mm is NULL. [Maddy: fixed message to avoid checkpatch format style error]

In the Linux kernel, the following vulnerability has been resolved: sched/mmcid: Prevent CID stalls due to concurrent forks A newly forked task is accounted as MMCID user before the task is visible in the process' thread list and the global task list. This creates the following problem: CPU1 CPU2 fork() sched_mm_cid_fork(tnew1) tnew1->mm.mm_cid_users++; tnew1->mm_cid.cid = getcid() -> preemption fork() sched_mm_cid_fork(tnew2) tnew2->mm.mm_cid_users++; // Reaches the per CPU threshold mm_cid_fixup_tasks_to_cpus() for_each_other(current, p) .... As tnew1 is not visible yet, this fails to fix up the already allocated CID of tnew1. As a consequence a subsequent schedule in might fail to acquire a (transitional) CID and the machine stalls. Move the invocation of sched_mm_cid_fork() after the new task becomes visible in the thread and the task list to prevent this. This also makes it symmetrical vs. exit() where the task is removed as CID user before the task is removed from the thread and task lists.

In the Linux kernel, the following vulnerability has been resolved: USB: core: Limit the length of unkillable synchronous timeouts The usb_control_msg(), usb_bulk_msg(), and usb_interrupt_msg() APIs in usbcore allow unlimited timeout durations. And since they use uninterruptible waits, this leaves open the possibility of hanging a task for an indefinitely long time, with no way to kill it short of unplugging the target device. To prevent this sort of problem, enforce a maximum limit on the length of these unkillable timeouts. The limit chosen here, somewhat arbitrarily, is 60 seconds. On many systems (although not all) this is short enough to avoid triggering the kernel's hung-task detector. In addition, clear up the ambiguity of negative timeout values by treating them the same as 0, i.e., using the maximum allowed timeout.

In the Linux kernel, the following vulnerability has been resolved: usb: yurex: fix race in probe The bbu member of the descriptor must be set to the value standing for uninitialized values before the URB whose completion handler sets bbu is submitted. Otherwise there is a window during which probing can overwrite already retrieved data.

In the Linux kernel, the following vulnerability has been resolved: xhci: Fix NULL pointer dereference when reading portli debugfs files Michal reported and debgged a NULL pointer dereference bug in the recently added portli debugfs files Oops is caused when there are more port registers counted in xhci->max_ports than ports reported by Supported Protocol capabilities. This is possible if max_ports is more than maximum port number, or if there are gaps between ports of different speeds the 'Supported Protocol' capabilities. In such cases port->rhub will be NULL so we can't reach xhci behind it. Add an explicit NULL check for this case, and print portli in hex without dereferencing port->rhub.

In the Linux kernel, the following vulnerability has been resolved: net/mana: Null service_wq on setup error to prevent double destroy In mana_gd_setup() error path, set gc->service_wq to NULL after destroy_workqueue() to match the cleanup in mana_gd_cleanup(). This prevents a use-after-free if the workqueue pointer is checked after a failed setup.

In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: acp-mach-common: Add missing error check for clock acquisition The acp_card_rt5682_init() and acp_card_rt5682s_init() functions did not check the return values of clk_get(). This could lead to a kernel crash when the invalid pointers are later dereferenced by clock core functions. Fix this by: 1. Changing clk_get() to the device-managed devm_clk_get(). 2. Adding IS_ERR() checks immediately after each clock acquisition.

In the Linux kernel, the following vulnerability has been resolved: serial: caif: hold tty->link reference in ldisc_open and ser_release A reproducer triggers a KASAN slab-use-after-free in pty_write_room() when caif_serial's TX path calls tty_write_room(). The faulting access is on tty->link->port. Hold an extra kref on tty->link for the lifetime of the caif_serial line discipline: get it in ldisc_open() and drop it in ser_release(), and also drop it on the ldisc_open() error path. With this change applied, the reproducer no longer triggers the UAF in my testing.

SOPlanning 1.52.00 is vulnerable to Cross Site Scripting (XSS) via the groupe_id parameter to process/groupe_save.php.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix DMA FIFO desync on error CQE SQ recovery In case of a TX error CQE, a recovery flow is triggered, mlx5e_reset_txqsq_cc_pc() resets dma_fifo_cc to 0 but not dma_fifo_pc, desyncing the DMA FIFO producer and consumer. After recovery, the producer pushes new DMA entries at the old dma_fifo_pc, while the consumer reads from position 0. This causes us to unmap stale DMA addresses from before the recovery. The DMA FIFO is a purely software construct with no HW counterpart. At the point of reset, all WQEs have been flushed so dma_fifo_cc is already equal to dma_fifo_pc. There is no need to reset either counter, similar to how skb_fifo pc/cc are untouched. Remove the 'dma_fifo_cc = 0' reset. This fixes the following WARNING: WARNING: CPU: 0 PID: 0 at drivers/iommu/dma-iommu.c:1240 iommu_dma_unmap_page+0x79/0x90 Modules linked in: mlx5_vdpa vringh vdpa bonding mlx5_ib mlx5_vfio_pci ipip mlx5_fwctl tunnel4 mlx5_core ib_ipoib geneve ip6_gre ip_gre gre nf_tables ip6_tunnel rdma_ucm ib_uverbs ib_umad vfio_pci vfio_pci_core act_mirred act_skbedit act_vlan vhost_net vhost tap ip6table_mangle ip6table_nat ip6table_filter ip6_tables iptable_mangle cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress vhost_iotlb iptable_raw tunnel6 vfio_iommu_type1 vfio openvswitch nsh rpcsec_gss_krb5 auth_rpcgss oid_registry xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat nf_nat xt_addrtype br_netfilter overlay zram zsmalloc rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core fuse [last unloaded: nf_tables] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.13.0-rc5_for_upstream_min_debug_2024_12_30_21_33 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:iommu_dma_unmap_page+0x79/0x90 Code: 2b 4d 3b 21 72 26 4d 3b 61 08 73 20 49 89 d8 44 89 f9 5b 4c 89 f2 4c 89 e6 48 89 ef 5d 41 5c 41 5d 41 5e 41 5f e9 c7 ae 9e ff <0f> 0b 5b 5d 41 5c 41 5d 41 5e 41 5f c3 66 2e 0f 1f 84 00 00 00 00 Call Trace: <IRQ> ? __warn+0x7d/0x110 ? iommu_dma_unmap_page+0x79/0x90 ? report_bug+0x16d/0x180 ? handle_bug+0x4f/0x90 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? iommu_dma_unmap_page+0x79/0x90 ? iommu_dma_unmap_page+0x2e/0x90 dma_unmap_page_attrs+0x10d/0x1b0 mlx5e_tx_wi_dma_unmap+0xbe/0x120 [mlx5_core] mlx5e_poll_tx_cq+0x16d/0x690 [mlx5_core] mlx5e_napi_poll+0x8b/0xac0 [mlx5_core] __napi_poll+0x24/0x190 net_rx_action+0x32a/0x3b0 ? mlx5_eq_comp_int+0x7e/0x270 [mlx5_core] ? notifier_call_chain+0x35/0xa0 handle_softirqs+0xc9/0x270 irq_exit_rcu+0x71/0xd0 common_interrupt+0x7f/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40

Akamai Guardicore Platform Agent (GPA) and Zero Trust Client on Linux and macOS allow TOCTOU-based local privilege escalation. The GPA service creates an IPC socket in the world-writable /tmp directory. It accepts unauthenticated IPC control messages. This enables a TOCTOU vulnerability in the HandleSaveLogs() function of the GPA service, by creating a log file and manipulating it into a symlink that points to the targeted path; this can allow an unprivileged local user to make arbitrary root-owned files world-writable. In addition, a diagnostic collection tool (gimmelogs) running with root privileges was vulnerable to command injection from the dbstore, offering a second privilege escalation vector. (On Windows, gimmelogs does not have command injection but does allow writing a ZIP archive to an unintended location.) This affects Akamai Guardicore Platform Agent 7.0 through 7.3.1 and Akamai Zero Trust Client 6.0 through 6.1.5.

In the Linux kernel, the following vulnerability has been resolved: net: nfc: nci: Fix parameter validation for packet data Since commit 9c328f54741b ("net: nfc: nci: Add parameter validation for packet data") communication with nci nfc chips is not working any more. The mentioned commit tries to fix access of uninitialized data, but failed to understand that in some cases the data packet is of variable length and can therefore not be compared to the maximum packet length given by the sizeof(struct).

In the Linux kernel, the following vulnerability has been resolved: iio: accel: adxl380: Avoid reading more entries than present in FIFO The interrupt handler reads FIFO entries in batches of N samples, where N is the number of scan elements that have been enabled. However, the sensor fills the FIFO one sample at a time, even when more than one channel is enabled. Therefore,the number of entries reported by the FIFO status registers may not be a multiple of N; if this number is not a multiple, the number of entries read from the FIFO may exceed the number of entries actually present. To fix the above issue, round down the number of FIFO entries read from the status registers so that it is always a multiple of N.

In the Linux kernel, the following vulnerability has been resolved: arm64: dts: qcom: monaco: Reserve full Gunyah metadata region We observe spurious "Synchronous External Abort" exceptions (ESR=0x96000010) and kernel crashes on Monaco-based platforms. These faults are caused by the kernel inadvertently accessing hypervisor-owned memory that is not properly marked as reserved. >From boot log, The Qualcomm hypervisor reports the memory range at 0x91a80000 of size 0x80000 (512 KiB) as hypervisor-owned: qhee_hyp_assign_remove_memory: 0x91a80000/0x80000 -> ret 0 However, the EFI memory map provided by firmware only reserves the subrange 0x91a40000–0x91a87fff (288 KiB). The remaining portion (0x91a88000–0x91afffff) is incorrectly reported as conventional memory (from efi debug): efi: 0x000091a40000-0x000091a87fff [Reserved...] efi: 0x000091a88000-0x0000938fffff [Conventional...] As a result, the allocator may hand out PFNs inside the hypervisor owned region, causing fatal aborts when the kernel accesses those addresses. Add a reserved-memory carveout for the Gunyah hypervisor metadata at 0x91a80000 (512 KiB) and mark it as no-map so Linux does not map or allocate from this area. For the record: Hyp version: gunyah-e78adb36e debug (2025-11-17 05:38:05 UTC) UEFI Ver: 6.0.260122.BOOT.MXF.1.0.c1-00449-KODIAKLA-1

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix in-place encryption corruption in SMB2_write() SMB2_write() places write payload in iov[1..n] as part of rq_iov. smb3_init_transform_rq() pointer-shares rq_iov, so crypt_message() encrypts iov[1] in-place, replacing the original plaintext with ciphertext. On a replayable error, the retry sends the same iov[1] which now contains ciphertext instead of the original data, resulting in corruption. The corruption is most likely to be observed when connections are unstable, as reconnects trigger write retries that re-send the already-encrypted data. This affects SFU mknod, MF symlinks, etc. On kernels before 6.10 (prior to the netfs conversion), sync writes also used this path and were similarly affected. The async write path wasn't unaffected as it uses rq_iter which gets deep-copied. Fix by moving the write payload into rq_iter via iov_iter_kvec(), so smb3_init_transform_rq() deep-copies it before encryption.

In the Linux kernel, the following vulnerability has been resolved: net/tcp-ao: Fix MAC comparison to be constant-time To prevent timing attacks, MACs need to be compared in constant time. Use the appropriate helper function for this.

In the Linux kernel, the following vulnerability has been resolved: net: Fix rcu_tasks stall in threaded busypoll I was debugging a NIC driver when I noticed that when I enable threaded busypoll, bpftrace hangs when starting up. dmesg showed: rcu_tasks_wait_gp: rcu_tasks grace period number 85 (since boot) is 10658 jiffies old. rcu_tasks_wait_gp: rcu_tasks grace period number 85 (since boot) is 40793 jiffies old. rcu_tasks_wait_gp: rcu_tasks grace period number 85 (since boot) is 131273 jiffies old. rcu_tasks_wait_gp: rcu_tasks grace period number 85 (since boot) is 402058 jiffies old. INFO: rcu_tasks detected stalls on tasks: 00000000769f52cd: .N nvcsw: 2/2 holdout: 1 idle_cpu: -1/64 task:napi/eth2-8265 state:R running task stack:0 pid:48300 tgid:48300 ppid:2 task_flags:0x208040 flags:0x00004000 Call Trace: <TASK> ? napi_threaded_poll_loop+0x27c/0x2c0 ? __pfx_napi_threaded_poll+0x10/0x10 ? napi_threaded_poll+0x26/0x80 ? kthread+0xfa/0x240 ? __pfx_kthread+0x10/0x10 ? ret_from_fork+0x31/0x50 ? __pfx_kthread+0x10/0x10 ? ret_from_fork_asm+0x1a/0x30 </TASK> The cause is that in threaded busypoll, the main loop is in napi_threaded_poll rather than napi_threaded_poll_loop, where the latter rarely iterates more than once within its loop. For rcu_softirq_qs_periodic inside napi_threaded_poll_loop to report its qs state, the last_qs must be 100ms behind, and this can't happen because napi_threaded_poll_loop rarely iterates in threaded busypoll, and each time napi_threaded_poll_loop is called last_qs is reset to latest jiffies. This patch changes so that in threaded busypoll, last_qs is saved in the outer napi_threaded_poll, and whether busy_poll_last_qs is NULL indicates whether napi_threaded_poll_loop is called for busypoll. This way last_qs would not reset to latest jiffies on each invocation of napi_threaded_poll_loop.

In the Linux kernel, the following vulnerability has been resolved: spi: amlogic: spifc-a4: Fix DMA mapping error handling Fix three bugs in aml_sfc_dma_buffer_setup() error paths: 1. Unnecessary goto: When the first DMA mapping (sfc->daddr) fails, nothing needs cleanup. Use direct return instead of goto. 2. Double-unmap bug: When info DMA mapping failed, the code would unmap sfc->daddr inline, then fall through to out_map_data which would unmap it again, causing a double-unmap. 3. Wrong unmap size: The out_map_info label used datalen instead of infolen when unmapping sfc->iaddr, which could lead to incorrect DMA sync behavior.

In the Linux kernel, the following vulnerability has been resolved: crypto: caam - fix overflow on long hmac keys When a key longer than block size is supplied, it is copied and then hashed into the real key. The memory allocated for the copy needs to be rounded to DMA cache alignment, as otherwise the hashed key may corrupt neighbouring memory. The copying is performed using kmemdup, however this leads to an overflow: reading more bytes (aligned_len - keylen) from the keylen source buffer. Fix this by replacing kmemdup with kmalloc, followed by memcpy.

The socket connection handler in aswArPot.sys in the Avast and AVG Windows Anti Rootkit driver before 22.1 allows local attackers to execute arbitrary code in kernel mode or cause a denial of service (memory corruption and OS crash) due to a double fetch vulnerability at aswArPot+0xbb94.