CVE Feed

In the Linux kernel, the following vulnerability has been resolved: igb: remove napi_synchronize() in igb_down() When an AF_XDP zero-copy application terminates abruptly (e.g., kill -9), the XSK buffer pool is destroyed but NAPI polling continues. igb_clean_rx_irq_zc() repeatedly returns the full budget, preventing napi_complete_done() from clearing NAPI_STATE_SCHED. igb_down() calls napi_synchronize() before napi_disable() for each queue vector. napi_synchronize() spins waiting for NAPI_STATE_SCHED to clear, which never happens. igb_down() blocks indefinitely, the TX watchdog fires, and the TX queue remains permanently stalled. napi_disable() already handles this correctly: it sets NAPI_STATE_DISABLE. After a full-budget poll, __napi_poll() checks napi_disable_pending(). If set, it forces completion and clears NAPI_STATE_SCHED, breaking the loop that napi_synchronize() cannot. napi_synchronize() was added in commit 41f149a285da ("igb: Fix possible panic caused by Rx traffic arrival while interface is down"). napi_disable() provides stronger guarantees: it prevents further scheduling and waits for any active poll to exit. Other Intel drivers (ixgbe, ice, i40e) use napi_disable() without a preceding napi_synchronize() in their down paths. Remove redundant napi_synchronize() call and reorder napi_disable() before igb_set_queue_napi() so the queue-to-NAPI mapping is only cleared after polling has fully stopped.

In the Linux kernel, the following vulnerability has been resolved: firmware: thead: Fix buffer overflow and use standard endian macros Addresses two issues in the TH1520 AON firmware protocol driver: 1. Fix a potential buffer overflow where the code used unsafe pointer arithmetic to access the 'mode' field through the 'resource' pointer with an offset. This was flagged by Smatch static checker as: "buffer overflow 'data' 2 <= 3" 2. Replace custom RPC_SET_BE* and RPC_GET_BE* macros with standard kernel endianness conversion macros (cpu_to_be16, etc.) for better portability and maintainability. The functionality was re-tested with the GPU power-up sequence, confirming the GPU powers up correctly and the driver probes successfully. [ 12.702370] powervr ffef400000.gpu: [drm] loaded firmware powervr/rogue_36.52.104.182_v1.fw [ 12.711043] powervr ffef400000.gpu: [drm] FW version v1.0 (build 6645434 OS) [ 12.719787] [drm] Initialized powervr 1.0.0 for ffef400000.gpu on minor 0

In the Linux kernel, the following vulnerability has been resolved: EDAC/mc: Fix error path ordering in edac_mc_alloc() When the mci->pvt_info allocation in edac_mc_alloc() fails, the error path will call put_device() which will end up calling the device's release function. However, the init ordering is wrong such that device_initialize() happens *after* the failed allocation and thus the device itself and the release function pointer are not initialized yet when they're called: MCE: In-kernel MCE decoding enabled. ------------[ cut here ]------------ kobject: '(null)': is not initialized, yet kobject_put() is being called. WARNING: lib/kobject.c:734 at kobject_put, CPU#22: systemd-udevd CPU: 22 UID: 0 PID: 538 Comm: systemd-udevd Not tainted 7.0.0-rc1+ #2 PREEMPT(full) RIP: 0010:kobject_put Call Trace: <TASK> edac_mc_alloc+0xbe/0xe0 [edac_core] amd64_edac_init+0x7a4/0xff0 [amd64_edac] ? __pfx_amd64_edac_init+0x10/0x10 [amd64_edac] do_one_initcall ... Reorder the calling sequence so that the device is initialized and thus the release function pointer is properly set before it can be used. This was found by Claude while reviewing another EDAC patch.

In the Linux kernel, the following vulnerability has been resolved: gpio: omap: do not register driver in probe() Commit 11a78b794496 ("ARM: OMAP: MPUIO wake updates") registers the omap_mpuio_driver from omap_mpuio_init(), which is called from omap_gpio_probe(). However, it neither makes sense to register drivers from probe() callbacks of other drivers, nor does the driver core allow registering drivers with a device lock already being held. The latter was revealed by commit dc23806a7c47 ("driver core: enforce device_lock for driver_match_device()") leading to a potential deadlock condition described in [1]. Additionally, the omap_mpuio_driver is never unregistered from the driver core, even if the module is unloaded. Hence, register the omap_mpuio_driver from the module initcall and unregister it in module_exit().

MERCURY MIPC252W IP camera 1.0.5 Build 230306 Rel.79931n contains an improper authentication vulnerability in the RTSP service. After successful Digest authentication in an initial DESCRIBE request, the device does not verify the Digest response parameter in subsequent RTSP requests within the same session. As a result, RTSP methods such as SETUP, PLAY, and TEARDOWN can be processed even when the Authorization header contains an empty or invalid response value, as long as the nonce and session identifier correspond to a previously authenticated session. This allows an attacker with network access to reuse session parameters and issue unauthorized RTSP control commands without computing a valid Digest response.

The RTSP service of MERCURY IP camera MIPC252W 1.0.5 Build 230306 has an issue handling failed Digest authentication attempts. By repeatedly sending RTSP requests with invalid authentication parameters, an unauthenticated attacker can cause the RTSP service to enter a persistent authentication failure state, preventing legitimate clients from authenticating and leading to a denial of service.

A handling issue in the RTSP service of the Mercury MIPC252W 1.0.5 Build 230306 Rel.79931n allows an authenticated attacker to trigger session termination by repeatedly sending SETUP requests for the same media track within a single RTSP session. This causes the server to reset the RTSP connection, leading to a denial-of-service condition.

A null pointer dereference vulnerability exists in the RTSP service of the MERCURY MIPC252W 1.0.5 Build 230306 Rel.79931n. During the processing of a SETUP request for the path rtsp://<IP>:554/stream1/track2, the device fails to properly validate the Transport header field. When this header is improperly constructed, the RTSP service can dereference a NULL pointer during request parsing. Successful exploitation causes the device to crash and automatically reboot.

Cross Site Request Forgery vulnerability in diskoverdata diskover-community v.2.3.5. and before allows a remote attacker to escalate privileges and obtain sensitive information via the public/settings_process.php

A command injection vulnerability exists in Tenda AC18 V15.03.05.05_multi. The vulnerability is located in the /goform/SetSambaCfg interface, where improper handling of the guestuser parameter allows attackers to execute arbitrary system commands.

A reflected cross-site scripting (XSS) vulnerability exists in WebFileSys version before 2.32.0 and fixed in v.2.32.0. User-controlled input is reflected into HTML and JavaScript contexts without proper output encoding, allowing arbitrary JavaScript execution in the victim's browser via the ftpBackup functionality, authentication input handling, search functionality, and error message rendering components

An issue in Pro-Bit before v1.77.4 allows unauthenticated attackers to directly access sensitive directory and its subdirectories.

NASA Earth Observing System Data and Information System (EOSDIS) MODAPS v8.1 was discovered to contain a SQL injection vulnerability in the category parameter

SQL Injection vulnerability exists in Sourcecodester Online Job Portal phppdo 1.0 ivia the category parameter in /jobportal/index.php.

An issue in the /store/items/search endpoint of Agent Protocol server commit e9a89f allows attackers to cause a Denial of Service (DoS) via a crafted POST request.

A reflected cross-site scripting (XSS) vulnerability exists in diskover-community <= 2.3.5 in public/selectindices.php via the namecontains parameter

A reflected cross-site scripting (XSS) vulnerability exists in diskover-community <= 2.3.5 in public/view.php via the doctype parameter

An open redirect in the /api/google/authorize endpoint of hunvreus DevPush v0.3.2 allows attackers to redirect users to malicious sites via supplying a crafted URL.

The Fan Control application V251 contains an improper privilege handling vulnerability in its Open File Dialog. The dialog processes user-supplied paths with elevated permissions, which can be exploited by a local attacker to perform actions with administrator-level privileges.

A path traversal vulnerability in the UI/static component of leonvanzyl autocoder commit 79d02a allows attackers to read arbitrary files via sending crafted URL path containing traversal sequences.

A remote code execution (RCE) vulnerability in the /devserver/start endpoint of leonvanzyl autocoder commit 79d02a allows attackers to execute arbitrary code via providing a crafted command parameter.

A path traversal vulnerability in the Blocks module of Daylight Studio FuelCMS v1.5.2 allows attackers to execute a directory traversal.

An insufficient encryption vulnerability exists in the Device Authentication functionality of GeoVision GV-IP Device Utility 9.0.5. Listening to broadcast packets can lead to credentials leak. An attacker can listen to broadcast messages to trigger this vulnerability. When interacting with various Geovision devices on the network, the utility may send privileged commands; in order to do so, the username and password of the device need to be provided. In some instances the command is broadcasted over UDP and the username/password are encrypted using a cryptographic protocol that appears to be derivated from Blowfish. However the symmetric key used for the encryption is also included in the packet, and thus the security of the username/password only relies on the "obscurity" of the encryption scheme. An attacker on the same LAN can listen to the broadcast traffic once an admin user interacts with the device, and decrypt the credentials using their own implementation of the algorithm. With this password the attacker would have full control over the device configuration, allowing them to change its ip address or even reset it to factory default.

A vulnerability was identified in D-Link DIR-825 3.00b32. This affects the function NMBD_process of the file sserver.c of the component nmbd. Such manipulation leads to buffer overflow. The attack can only be initiated within the local network. The exploit is publicly available and might be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was determined in D-Link DIR-822 A_101. The impacted element is the function system of the file /udhcpcd/dhcpd.c of the component udhcpd DHCP Service. This manipulation of the argument Hostname causes command injection. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability was found in choieastsea simple-openstack-mcp up to 767b2f4a8154cca344344b9725537a58399e6036. The affected element is the function exec_openstack of the file server.py. The manipulation results in os command injection. It is possible to launch the attack remotely. The exploit has been made public and could be used. This product takes the approach of rolling releases to provide continious delivery. Therefore, version details for affected and updated releases are not available. The project was informed of the problem early through an issue report but has not responded yet.

A vulnerability has been found in BidingCC BuildingAI up to 26.0.1. Impacted is the function uploadRemoteFile of the file packages/core/src/modules/upload/services/file-storage.service.ts of the component Remote Upload API. The manipulation of the argument url leads to server-side request forgery. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet.

A flaw has been found in AgentDeskAI browser-tools-mcp up to 1.2.0. This issue affects some unknown processing of the file browser-tools-server/browser-connector.ts. Executing a manipulation can lead to os command injection. The attack may be performed from remote. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet.

A vulnerability was detected in code-projects Employee Management System 1.0. This vulnerability affects unknown code of the file /370project/process/eprocess.php of the component Endpoint. Performing a manipulation of the argument pwd results in sql injection. The attack is possible to be carried out remotely. The exploit is now public and may be used.

A security vulnerability has been detected in Intina47 context-sync up to 2.0.0. This affects an unknown part of the file src/git-integration.ts of the component Git Integration. Such manipulation leads to os command injection. The attack can be executed remotely. The exploit has been disclosed publicly and may be used.

A weakness has been identified in Toowiredd chatgpt-mcp-server up to 0.1.0. Affected by this issue is some unknown functionality of the file src/services/docker.service.ts of the component MCP/HTTP. This manipulation causes os command injection. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet.

A vulnerability was determined in liyupi yu-picture up to a053632c41340152bf75b66b3c543d129123d8ec. This impacts the function PageRequest of the file yu-picture-backend/src/main/java/com/yupi/yupicturebackend/service/impl/PictureServiceImpl.java of the component MyBatis-Plus. Executing a manipulation of the argument sortField can lead to sql injection. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. This product does not use versioning. This is why information about affected and unaffected releases are unavailable. Applying a patch is advised to resolve this issue. The project was informed of the problem early through a pull request but has not reacted yet.

A vulnerability was found in 666ghj MiroFish up to 0.1.2. This affects the function get_simulation_posts of the file backend/app/api/simulation.py of the component Query Parameter Handler. Performing a manipulation of the argument Platform results in path traversal. The attack can be initiated remotely. The exploit has been made public and could be used.

A vulnerability has been found in 666ghj MiroFish up to 0.1.2. The impacted element is the function SimulationIPCClient.send_command of the file backend/app/services/simulation_ipc.py of the component Inter-Process Communication. Such manipulation leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet.

A flaw has been found in Tenda F456 1.0.0.5. The affected element is an unknown function of the file /goform/setcfm of the component httpd. This manipulation of the argument funcname/funcpara1 causes buffer overflow. It is possible to initiate the attack remotely. The exploit has been published and may be used.

A vulnerability was detected in Tenda F456 1.0.0.5. Impacted is the function fromSafeUrlFilter of the file /goform/SafeUrlFilter of the component httpd. The manipulation of the argument page results in buffer overflow. The attack may be performed from remote. The exploit is now public and may be used.

A security vulnerability has been detected in Tenda F456 1.0.0.5. This issue affects the function fromVirtualSer of the file /goform/VirtualSer of the component httpd. The manipulation of the argument menufacturer/Go leads to buffer overflow. The attack is possible to be carried out remotely. The exploit has been disclosed publicly and may be used.

A weakness has been identified in Tenda F456 1.0.0.5. This vulnerability affects the function fromPptpUserAdd of the file /goform/PPTPDClient of the component httpd. Executing a manipulation of the argument opttype/usernamewith can lead to buffer overflow. The attack can be executed remotely. The exploit has been made available to the public and could be used for attacks.

A security flaw has been discovered in Tenda F456 1.0.0.5. This affects the function frmL7ProtForm of the file /goform/L7Prot of the component httpd. Performing a manipulation of the argument page results in buffer overflow. Remote exploitation of the attack is possible. The exploit has been released to the public and may be used for attacks.

A vulnerability was determined in baomidou dynamic-datasource 2.5.0. Affected by this vulnerability is the function DsSpelExpressionProcessor#doDetermineDatasource of the file dynamic-datasource-spring/src/main/java/com/baomidou/dynamic/datasource/processor/DsSpelExpressionProcessor.java of the component StandardEvaluationContext/SpelExpressionParser. This manipulation causes injection. The attack may be initiated remotely. Patch name: 273fcedaee984c08197c0890f14190b86ab7e0b8. It is recommended to apply a patch to fix this issue.

A vulnerability was found in GreenCMS up to 2.3. Affected is the function themeadd of the file /index.php?m=admin&c=custom&a=themeadd. The manipulation results in unrestricted upload. The attack can be launched remotely. The exploit has been made public and could be used. This vulnerability only affects products that are no longer supported by the maintainer.

** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2026-28496. Reason: This candidate is a duplicate of CVE-2026-28496. Notes: All CVE users should reference CVE-2026-28496 instead of this candidate.

Wansview 1.0.2 contains a buffer overflow vulnerability that allows local attackers to crash the application by supplying oversized input strings. Attackers can inject 2000-byte payloads into the Camera name and DID number fields during camera addition to trigger application crashes.

P10 Central Management Software 1.4.13 contains a buffer overflow vulnerability in the login password field that allows local attackers to crash the application by submitting an oversized input string. Attackers can paste a 2000-byte payload into the password field and click login to trigger an application crash and denial of service.

ObserverIP Scan Tool 1.4.0.1 contains a denial of service vulnerability that allows local attackers to crash the application by submitting an excessively long string in the IP input field. Attackers can paste a 2000-byte buffer of repeated characters into the IP field and trigger a search operation to cause an application crash.

CEWE Photoshow 6.3.4 contains a buffer overflow vulnerability in the login dialog that allows attackers to crash the application by submitting oversized input. Attackers can inject 4000 bytes of data into the email address and password fields to trigger a denial of service condition.

Prime95 29.4b7 contains a buffer overflow vulnerability in the PrimeNet connection dialog that allows local attackers to crash the application by supplying an excessively long string in the optional proxy password field. Attackers can trigger a denial of service by entering a 6000-byte payload into the proxy password parameter, causing the application to crash when processing the connection settings.

Bome Restorator 1793 contains a buffer overflow vulnerability that allows local attackers to crash the application by supplying an excessively long string in the Name field. Attackers can create a malicious payload exceeding 4000 bytes and paste it into the Name input field to trigger an application crash and denial of service.

Project64 2.3.2 contains a buffer overflow vulnerability in the Plugin Directory settings field that allows local attackers to crash the application by supplying an excessively long string. Attackers can input a 6000-byte payload into the Plugin Directory field through the Options > Settings > Directories interface to trigger an application crash when settings are reopened.

Easyboot 6.6.0 contains a buffer overflow vulnerability in the Replace Text function that allows local attackers to crash the application by supplying an oversized string. Attackers can trigger the vulnerability by accessing File > Tools > Replace Text and pasting a 7000-byte payload into the text fields to cause a denial of service.