CVE-2026-76474
As part of Cisco's ongoing commitment to proactive security and product quality, engineering teams for Cisco Emergency Responder, Cisco Prime Collaboration Deployment, Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager IM & Presence Service (Unified CM IM&P), Cisco Unified Communications Manager Session Management Edition (Unified CM SME), and Cisco Unity Connection have conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76474 are related to issues concerning improper authentication that are grouped under the Common Weakness Enumeration (CWE) Class CWE-287.
CVE-2026-76473
As part of Cisco's ongoing commitment to proactive security and product quality, engineering teams for Cisco Emergency Responder, Cisco Prime Collaboration Deployment, Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager IM & Presence Service (Unified CM IM&P), Cisco Unified Communications Manager Session Management Edition (Unified CM SME), and Cisco Unity Connection have conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76473 are related to issues concerning improper neutralization of special elements in output used by a downstream component that are grouped under the Common Weakness Enumeration (CWE) Class CWE-74.
CVE-2026-76466
A vulnerability in the database service feature of Cisco Expressway Series could allow an unauthenticated, remote attacker with network access to a Cisco Expressway device to execute arbitrary operating system commands as root. This vulnerability is due to the use of persistent cookies. Additionally, there is insufficient validation of client certificates when the TLS Verify Mode is set to Enabled for clustering, which means that client certificates are not validated. An attacker with possession of the cookies could exploit this vulnerability by connecting to the database service and invoking specific remote procedure call (RPC) commands. A successful exploit could allow the attacker to execute arbitrary commands as root on the underlying operating system of an affected device. Note: Cisco Expressway Series refers to Cisco Expressway Core (Expressway-C) devices and Cisco Expressway Edge (Expressway-E) devices.
CVE-2026-76461
A vulnerability in the email parsing of Cisco AsyncOS Software for Cisco Secure Email Gateway could allow an unauthenticated, remote attacker to execute arbitrary commands with root privileges on the underlying operating system. This vulnerability is due to insufficient validation in the email parsing logic. An attacker could exploit this vulnerability by sending a crafted email message that contains malicious SQL statements through an affected device. A successful exploit could allow the attacker to execute arbitrary SQL statements, leading to command execution with root privileges on the underlying operating system.
CVE-2026-76460
A vulnerability in an API of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to bypass authentication. This vulnerability is due to insufficient authentication control on an API endpoint. An attacker could exploit this vulnerability by sending a crafted request to an affected API endpoint. A successful exploit could allow the attacker to gain unauthorized access to the affected device by bypassing the web-based management interface.
CVE-2026-76268
In Splunk Enterprise versions below 10.4.3 and 10.2.7, an unauthenticated user with network access to the Patroni Representational State Transfer (REST) Application Programming Interface (API) on a search head cluster member could execute attacker-controlled operating-system commands. The vulnerability is possible because this interface does not require authentication for critical configuration operations. For more information see Sidecar configuration settings (https://help.splunk.com/en/data-management/splunk-enterprise-admin-manual/10.2/splunk-sidecars/sidecar-configuration-settings) in the Splunk documentation. Splunk Enterprise versions 10.0.x and 9.4.x are not affected.
CVE-2026-76183
Authentication Bypass by Alternate Name vulnerability in Apache Tomcat allowed the security constraints for any WebSocket endpoint to be bypassed. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.25, from 10.1.0-M1 through 10.1.59, from 9.0.0.M1 through 9.0.121. The following versions were EOS at the time the CVE was created but are known to be affected: from 8.5.0 through 8.5.100, from 7.0.43 through 7.0.109. Other unsupported versions may also be affected. Users are recommended to upgrade to version 11.0.26, 10.1.60 or 9.0.122, which fix the issue.
CVE-2026-76071
Netis NC63 firmware through V3.0.0.3327 contains a stack-based buffer overflow vulnerability that allows unauthenticated remote attackers to overwrite saved stack state by supplying an oversized destHost parameter to the ipFilterList=mod action in netis.cgi. Attackers can exploit widthless sscanf conversions that copy user-supplied input into fixed-size stack buffers before authentication is verified, achieving remote code execution as root due to the Boa web server executing the CGI environment with root privileges.
CVE-2026-76070
Netis NC63 firmware through V3.0.0.3327 contains a stack-based buffer overflow vulnerability that allows unauthenticated remote attackers to overwrite saved stack state by submitting an oversized Base64-encoded password to the login handler in /bin/netis.cgi. Attackers can exploit the custom Base64 decoder's lack of output length validation against the fixed-size stack buffer to achieve remote code execution with root privileges, as the Boa web server executes the CGI environment as root.
CVE-2026-76060
An authenticated OS command injection vulnerability exists in ZoneMinder's event export functionality. The exportFile HTTP request parameter is passed unsanitized into a shell command executed via PHP's exec(), allowing any authenticated user with View Events permission to execute arbitrary operating system commands on the server.
CVE-2026-76036
Buffer overflow in Dawn in Google Chrome on on Android prior to 151.0.7922.169 allowed a remote attacker to execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: Critical)
CVE-2026-75898
RAGFlow before 0.26.3 contains a server-side request forgery vulnerability in the agent workflow "Invoke" component (agent/component/invoke.py). The component builds an outbound request URL from canvas configuration and runtime template variables and passes it to requests.get, requests.post, or requests.put without calling the shared assert_url_is_safe validator or pinning the resolved address, unlike the crawler, SearXNG, file-upload, and RSS fetch paths. A user who can create or trigger an agent can direct the server to fetch loopback, link-local, and RFC 1918 destinations, including cloud instance metadata endpoints and services co-located on the deployment network, and the response body is returned as the component output. Where an agent is configured to interpolate the chat query into the Invoke URL, the destination is chosen by whoever can send that query.
CVE-2026-75865
The WPLP Cookie Consent – Cookie Banner & Consent Management for GDPR, CCPA & Google Consent Mode plugin for WordPress is vulnerable to arbitrary file upload due to missing file type validation in the saas_upload_logo() function combined with an authorization bypass on the WPLP connector REST endpoints in all versions up to, and including, 4.4.1. This makes it possible for unauthenticated attackers to upload arbitrary files on the affected site's server which may make remote code execution possible.
CVE-2026-75855
ArcadeDB versions before 26.8.1 fail to sanitize database names in the POST /api/v1/server endpoint's create database and drop database commands, allowing authenticated root users to write and delete arbitrary files outside the configured database directory. Attackers can supply database names containing ../ sequences to create databases at arbitrary filesystem paths or recursively delete directories the server process can access.
CVE-2026-75827
Grav before 2.0.15 contains an arbitrary file write vulnerability in the Blueprint dynamic-data bare-function validation that uses an incomplete denylist instead of a positive allowlist. Attackers with page-edit or blueprint-config access can invoke the error_log function through a data directive to append PHP payloads to web-accessible files, achieving remote code execution.
CVE-2026-75816
The Frontend Admin by DynamiApps plugin for WordPress is vulnerable to Authentication Bypass to Account Takeover in all versions up to, and including, 3.29.12. This is due to the pre_update_value function lacking any capability or ownership check, and ActionPost::conditions_logic() short-circuiting its current_user_can('edit_post') authorization gate whenever the post ID is non-numeric — such as the string user_1 — allowing unauthenticated form submissions to be routed to arbitrary user records without restriction. This makes it possible for unauthenticated attackers to overwrite any user's registered email address, including an administrator's, and then leverage WordPress's native password-reset flow to fully take over the targeted account.
CVE-2026-75650
Adobe Commerce is affected by an Improper Neutralization of Special Elements Used in a Template Engine vulnerability that could result in arbitrary code execution in the context of the current user. An attacker could exploit this vulnerability to execute arbitrary code. Exploitation of this issue does not require user interaction. Scope is changed.
CVE-2026-75616
An OS command injection vulnerability exists in the web management interface of Archer C20 v6 firmware when processing certain WAN-related configuration operations. An authenticated administrator may exploit insufficient input validation to execute arbitrary system commands, potentially resulting in full device compromise. Successful exploitation may allow arbitrary command execution with elevated privileges, compromising the confidentiality, integrity, and availability of the affected device and network traffic passing through it.
CVE-2026-75604
Next.js is a React framework for building full-stack web applications. From 13.4.0 until 15.5.24 and 16.3.3, Next.js applications using Pages Router or App Router without Cache Components on Windows-hosted servers do not consistently escape backslashes in route segments before constructing incremental-cache paths. In packages/next/src/shared/lib/router/utils/escape-path-delimiters.ts and packages/next/src/server/lib/incremental-cache/file-system-cache.ts, a remote request can supply encoded Windows path separators that traverse outside the intended cache root and expose private build data, including the server-reference-manifest encryption key. Disclosure of that key can enable remote code execution in the affected application. This issue is fixed in versions 15.5.24 and 16.3.3.
CVE-2026-75431
PowerJob Server version 5.1.2 (and likely earlier) uses a predictable JWT signing key for HS256-based authentication. This allows a remote attacker to execute arbitrary code.
CVE-2026-75430
PowerJob Worker version 5.1.2 (and likely earlier versions) exposes the /worker/deployContainer HTTP endpoint without authentication on the default transport port. This allows a remote attacker to execute arbitrary code.
CVE-2026-75429
PowerJob versions 4.x through 5.1.2 contain an unauthenticated remote code execution vulnerability in the /friend/process endpoint of the Server-Worker transport layer
CVE-2026-75157
Apache Airflow's asset queued-events DELETE endpoints checked the caller's Dag-axis permission with `READ` instead of `EDIT`. Any authenticated user who could read a Dag could therefore delete that Dag's queued asset events, silently suppressing asset-triggered scheduling for it — a state-changing action gated on a read-only permission. Deployments are affected whenever asset-triggered scheduling is in use and Dag read access is granted more widely than Dag edit access, which is the normal RBAC arrangement; no special configuration is required. Upgrade to apache-airflow 3.3.2 or later.
CVE-2026-75045
In JetBrains YouTrack before 2025.3.156085, 2026.1.13913, 2026.2.18112 an unauthenticated attacker could download database backups via shared draft signature
CVE-2026-74970
Site isolation issue in the Graphics component. This vulnerability was fixed in Firefox 154, Firefox ESR 153.1, Thunderbird 154, and Thunderbird 153.1.
CVE-2026-74945
Information disclosure in the Graphics: Text component. This vulnerability was fixed in Firefox 154, Firefox ESR 115.39, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1.
CVE-2026-74943
Use-after-free in the Graphics: ImageLib component. This vulnerability was fixed in Firefox 154, Firefox ESR 115.39, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1.
CVE-2026-74939
Privilege escalation in the DOM: Navigation component. This vulnerability was fixed in Firefox 154, Firefox ESR 115.39, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1.
CVE-2026-74936
Use-after-free in the JavaScript: WebAssembly component. This vulnerability was fixed in Firefox 154, Firefox ESR 140.14, Firefox ESR 153.1, Thunderbird 154, Thunderbird 140.14, and Thunderbird 153.1.
CVE-2026-74727
In the Linux kernel, the following vulnerability has been resolved: ovpn: skip rehash for peers already removed from by_id ovpn_nl_peer_set_doit() resolves the target peer via ovpn_peer_get_by_id() before taking ovpn->lock. In the window between the lookup (which only takes a refcount) and the subsequent spin_lock_bh(&ovpn->lock), a concurrent OVPN_CMD_PEER_DEL, keepalive expiry, or socket teardown can take ovpn->lock first, run ovpn_peer_remove() to unhash the peer from all four tables (by_id, by_vpn_addr4/6, by_transp_addr) and release the lock. set_doit then acquires ovpn->lock and calls ovpn_peer_hash_vpn_ip(), which re-inserts the now-removed peer back into the rehashing tables. The same race affects the float path: ovpn_peer_endpoints_update() holds only a refcount and acquires ovpn->lock very late (after async AEAD decrypt and a netlink notification), then rehashes the peer in the by_transp_addr table. The resurrected peer becomes reachable again from the RX lookup (ovpn_peer_get_by_transp_addr) and the TX VPN-IP lookup, even though userspace believes it is gone. Once the data-path refcount drops the peer is freed via call_rcu while the hash entries embedded in it remain linked, opening a UAF window. Bail out of the rehash when hash_entry_id is unhashed, mirroring the sentinel already used by ovpn_peer_remove() to detect the already-removed state. The check is safe under ovpn->lock, which serializes every mutation of hash_entry_id, and is a no-op for the add path because ovpn_peer_add_mp() inserts hash_entry_id before calling ovpn_peer_hash_vpn_ip().
CVE-2026-74586
In the Linux kernel, the following vulnerability has been resolved: sctp: clear new_transport when removing a peer sctp_process_asconf_param() stores a newly added peer transport in asoc->new_transport. After all parameters in the ASCONF chunk have been processed, sctp_sf_do_asconf() uses this pointer to send a HEARTBEAT to the new transport. An authenticated ASCONF from a remote SCTP peer can add a transport and remove it again with a wildcard DEL-IP parameter in the same chunk. The wildcard deletion preserves the transport on which the ASCONF arrived, but removes the newly added transport through sctp_assoc_del_nonprimary_peers(). The removal does not clear asoc->new_transport, leaving it pointing to the removed transport. sctp_sf_do_asconf() then creates a HEARTBEAT whose chunk->transport points to the removed transport without holding a transport reference. During local address replacement, src_out_of_asoc_ok keeps this HEARTBEAT on control_chunk_list. After the transport is freed by RCU, a successful ASCONF_ACK for the replacement address releases the queued HEARTBEAT and sctp_outq_select_transport() reads the freed transport's state. The issue was found during a static audit of SCTP objects. With an authenticated peer, the reproducer triggered the same KASAN report in 2 of 2 unpatched runs on a KASAN-enabled netdev/main kernel: BUG: KASAN: slab-use-after-free in sctp_outq_select_transport Read of size 4 at addr ffff88800b9bd95c by task python3/197 Call Trace: sctp_outq_select_transport+0x549/0x8b0 [sctp] sctp_outq_flush+0x306/0x2c60 [sctp] sctp_transport_immediate_rtx+0xaf/0x260 [sctp] sctp_process_asconf_ack+0xa48/0xf70 [sctp] Allocated by task 197: sctp_transport_new+0x68/0x650 [sctp] sctp_assoc_add_peer+0x258/0x12a0 [sctp] sctp_process_asconf+0x5e9/0x1090 [sctp] Last potentially related work creation: __call_rcu_common.constprop.0+0x77/0xb70 sctp_assoc_del_nonprimary_peers+0x7c/0xd0 [sctp] sctp_process_asconf+0xd9c/0x1090 [sctp] The first invalid access was a four-byte read of transport->state at net/sctp/outqueue.c:833. The same reproducer completed the full authenticated ASCONF and local-address replacement sequence with this change without a KASAN report or oops. Clear new_transport when its peer is removed, before it can be used to create the HEARTBEAT.
CVE-2026-74580
In the Linux kernel, the following vulnerability has been resolved: vhost: reset the vring metadata cache on vring reconfiguration vq->meta_iotlb[] caches the vhost_iotlb_map that backs each vring metadata region, and iotlb_access_ok() returns early on a cache hit, taking the hit as proof that the region has already been validated: if (vhost_vq_meta_fetch(vq, addr, len, type)) return true; The cache is reset on VHOST_IOTLB_UPDATE and VHOST_IOTLB_INVALIDATE, on device IOTLB (re)initialisation and on vq reset, but not when VHOST_SET_VRING_ADDR replaces vq->desc, vq->avail and vq->used, nor when VHOST_SET_VRING_NUM changes the region sizes. With a device IOTLB attached both ioctls are accepted while the vq is live, and neither validates the addresses at ioctl time: vq_access_ok() and vq_log_used_access_ok() return true early because the addresses are GIOVAs, deferring validation to prefetch time. Once the cache has been populated that deferred validation no longer runs -- vq_meta_prefetch() hits the stale entry and returns true -- and vhost_vq_meta_fetch() keeps translating through the old mapping as map->addr + addr - map->start for an address the mapping no longer covers. vhost_copy_to_user() and vhost_copy_from_user() consume the result with __copy_to_user() and __copy_from_user(), which do not check it either, so a subsequent used ring update or descriptor fetch accesses memory outside the region the IOTLB actually maps. Reset the metadata cache whenever the vring is reconfigured, so the new addresses are pushed back through iotlb_access_ok()'s slow path.
CVE-2026-74469
In the Linux kernel, the following vulnerability has been resolved: sctp: prevent peer transport count overflow sctp_assoc_add_peer() increments the association's 16-bit transport_count for every new unique peer. Adding the 65,536th transport wraps the count to zero. SCTP sock_diag uses transport_count to reserve the INET_DIAG_PEERS payload, then copies one sockaddr_storage for every entry in transport_addr_list. After the wrap, a diagnostic dump reserves an empty payload and writes 8 MiB of peer addresses past the skb tail. Reject a new unique peer when transport_count has reached U16_MAX. Perform the check after the existing-peer lookup so a duplicate address continues to return its existing transport at the limit.
CVE-2026-74252
Joomla Extension - j2commerce.com - Stored XSS in Guest checkout in J2Store 1.0.0-3.3.20, 4.0.0-4.0.20, 4.1.0-4.1.5 - J2Commerce 4.1.5 is vulnerable to Stored Cross-Site Scripting (XSS) through the guest checkout billing address fields. An unauthenticated attacker exploits a filter bypass in Joomla's Input::getArray() combined with PHP's variables_order=EGPCS (Cookie overrides POST in $_REQUEST ) to store unsanitized HTML in fields such as billing_first_name.
CVE-2026-74251
Joomla Extension - phoca.cz - Unauthenticated SQL injection via attribute filter in Phoca Cart 5.0.0-6.1.6 - The a[] (attribute) and s[] (specification) GET array parameters on Phoca Cart's public shop items page are concatenated raw into SQL WHERE clauses without parameterization or escaping. An unauthenticated attacker can inject arbitrary SQL through these parameters, enabling full database extraction via time-based blind techniques.
CVE-2026-74239
XenForo before 2.3.13 contains a path traversal vulnerability in the style archive importer on Windows deployments that allows authenticated non-super administrators with style permissions to write arbitrary files outside the intended extraction directory by using backslash-based traversal sequences in ZIP member names. Attackers can craft a malicious ZIP archive with backslash path separators that bypass forward-slash validation to write arbitrary bytes to any web-server-writable path, including the public web root, achieving persistent code execution as the web-server account.
CVE-2026-74034
Wazuh from 4.1.0 before 4.14.8 contains a missing origin check in wm_agent_upgrade that allows enrolled agents to issue upgrade_custom commands with attacker-controlled file_path. Attackers can inject an upgrade_custom message over the agent channel to read arbitrary files as root, exfiltrating /etc/shadow and client.keys.
CVE-2026-73847
Emlog is an open source website building system. In 2.6.26 and earlier, missing CSRF protection on the AI Assistant execute_tool action in admin/ai.php lets a remote unauthenticated attacker submit a forged cross-site request from an attacker-controlled page to a recently logged-in administrator. The authentication cookie set in include/lib/loginauth.php has no explicit SameSite attribute, enabling Chrome's temporary Lax+POST grace window. The query_database case passes attacker-controlled sql and confirm_code values to Ai::queryDatabase in include/service/ai.php; read queries need no confirmation, write queries accept the public confirm string, only the blog table is write-protected, and aliasing password as pwd_hash bypasses output redaction. A successful request can read every database table and write every table except blog, including changing the user table to take over an administrator account. No fixed version is available as of this review.
CVE-2026-73786
A vulnerability in the web-based management interface of CPPM could allow an unauthenticated remote attacker to conduct a Denial-of-Service (DoS) attack. Successful exploitation could allow an attacker to cause instability and degrade performance of the vulnerable CPPM server.
CVE-2026-73678
MindsDB Minds Platform version 26.1.0 and earlier contains an unauthenticated remote code execution vulnerability that allows unauthenticated attackers to execute arbitrary OS commands by submitting crafted prompts to the unprotected POST /api/v1/responses/ endpoint, which reaches the Anton agent's scratchpad tool that calls exec() on attacker-influenced Python source without sandboxing. Attackers can first configure their own LLM API key through the unauthenticated PUT /api/v1/settings/ endpoint, then POST a prompt directing the agent to invoke the scratchpad tool with arbitrary Python code, achieving full OS command execution as the user running the desktop application and enabling access to SSH keys, stored credentials, and environment secrets.
CVE-2026-73673
Netis NC63 router firmware V3.0.0.3327 contains an unauthenticated firmware update vulnerability that allows unauthenticated attackers to submit unsigned firmware images by exploiting a missing authentication enforcement flaw in the Boa web server and netis.cgi CGI dispatcher. Attackers can send a multipart POST request to /cgi-bin/upload_fw.cgi without a valid session cookie, bypassing authentication because Boa grants access to any path containing '.cgi' regardless of cookie validation, and netis.cgi reads but does not enforce the authentication state before invoking the firmware update handler, which accepts images validated only by a forgeable additive checksum and static product strings rather than a cryptographic signature, potentially enabling persistent router compromise.
CVE-2026-73633
Uncontrolled resource consumption vulnerability in the JSON plugin of Apache Struts. When an application is configured to populate actions from a JSON request body, the plugin reads that body into memory without bounding how much it will accept, so a single request can exhaust the heap and deny service to other users. The plugin's configurable JSON input length limit does not bound this read. The JSON plugin is an optional component; applications that do not use it, or use it without enabling JSON request-body handling, are not affected. This issue affects Apache Struts: from 2.1.8 through 2.3.37, from 2.5.0 through 2.5.33, from 6.0.0 through 6.10.0, from 7.0.0 through 7.2.1. Users are recommended to upgrade to version 6.11.0 or 7.3.0, which fixes the issue.
CVE-2026-73570
A remote code execution vulnerability exists in Zimbra Collaboration (ZCS) before 10.1.20 when the optional zimbra-snmp package is installed and SNMP notifications are enabled. Due to improper sanitization of untrusted input during SNMP notification processing, an unauthenticated attacker can send specially crafted SMTP requests that may result in execution of arbitrary operating system commands as the Zimbra user.
CVE-2026-73554
https://github.com/HORKimhab/CVE-2026-73554
CVE-2026-73519
WolfStack before 25.9.2 contains a hard-coded cluster-authentication secret compiled into every build and published as a constant in src/auth/mod.rs, allowing remote unauthenticated attackers to bypass authentication by supplying this value in the X-WolfStack-Secret header to the require_auth() gate without any session, API key, or user account. Attackers can reach an affected node's management port to enumerate all Docker and LXC containers on the host and execute arbitrary commands as root inside any container via the POST /api/containers/{runtime}/{id}/exec endpoint.
CVE-2026-73321
XenForo before 2.3.13 contains an uncontrolled recursion vulnerability in the BBCode parser that allows authenticated attackers to cause persistent denial of service by submitting a post with deeply nested BBCode tags. Attackers can craft a single malicious post with sufficient nesting depth to exceed PHP's stack limit, causing fatal errors that repeatedly terminate PHP-FPM workers for all visitors rendering the affected thread.
CVE-2026-73320
XenForo before 2.3.13 contains an unauthenticated information disclosure vulnerability that allows unauthenticated attackers to retrieve private unfurl records by supplying predictable auto-increment primary key IDs to the unfurl endpoint. Attackers can enumerate or predict result IDs and query the endpoint without any session, user, or visibility checks to obtain rendered preview HTML, original URLs, and query strings from private conversations and other restricted content.
CVE-2026-73319
XenForo before 2.3.13 contains a cross-site scripting vulnerability in the dynamic redirect handler that allows unauthenticated attackers to execute arbitrary JavaScript in the board origin by crafting a malicious javascript: URI that bypasses host validation. Attackers can embed the board hostname in the URI authority component and use percent-encoded newlines to evade server-side filters, causing authenticated users who perform a Follow action to execute attacker-supplied JavaScript in their browser.
CVE-2026-73318
XenForo before 2.3.13 contains a missing authorization vulnerability in the force-agreement controller that allows any ACP administrator to access and submit force-agreement forms regardless of their assigned permissions. Attackers can bypass the option permission declared in the navigation configuration to update the global policy last-updated timestamp, forcing all users to re-agree to the privacy policy or terms of service.
CVE-2026-73317
XenForo before 2.3.13 contains a missing authorization vulnerability in the ACP cache-rebuild dispatcher that allows limited administrators with only the rebuildCache permission to perform unauthorized approval queue actions by supplying an arbitrary job class and actor user ID in the POST body. Attackers can invoke the approval queue job under any user identity to approve queued user registrations without holding the required approval-queue or moderator permissions, causing the moderation log to attribute actions to an impersonated account.
