CVE-2026-110025
A flaw has been found in slackero phpwcms up to 1.9.49/1.12.3. This issue affects some unknown processing of the file include/inc_front/content/cnt23.article.inc.php of the component Extension Check. This manipulation of the argument POST_name causes unrestricted upload. The attack can be initiated remotely. Upgrading to version 1.9.50 and 1.12.4 is capable of addressing this issue. Patch name: 118c978430f5a9668b30535f6e592c7ae8df711f/f4c136b467565b2d16ebe2b8276b9a03547a9a69/8571cb47df8d66804d1eb88ae3d1ab4fb513e1e7. Upgrading the affected component is recommended.
CVE-2026-109722
JIT miscompilation in the JavaScript Engine: JIT component. This vulnerability was fixed in Firefox 158, Firefox ESR 115.43, Firefox ESR 153.5, Thunderbird 158, and Thunderbird 153.5.
CVE-2026-109721
Incorrect boundary conditions in the JavaScript Engine: JIT component. This vulnerability was fixed in Firefox 158, Firefox ESR 153.5, Thunderbird 158, and Thunderbird 153.5.
CVE-2026-109715
Incorrect boundary conditions in the JavaScript Engine component. This vulnerability was fixed in Firefox 158, Firefox ESR 115.43, Firefox ESR 153.5, Thunderbird 158, and Thunderbird 153.5.
CVE-2026-109619
PHP has various global state that temporarily points into request memory. In some scenarios, global state may not be correctly reset, or may be repopulated after being reset. The global state may then refer to request memory even after it has been freed. Subsequent requests may read or branch on this stale state before it is fully initialized. Multiple strategies can trigger this condition and produce remote code execution (RCE).
CVE-2026-109618
PHP uses longjmp() for out-of-memory (OOM) errors to exit the current context and abort handling of the request. Some contexts may not properly account for this scenario and leave request memory in an uninitialized state before performing an allocation. The subsequent request cleanup procedure may read or branch on this memory. Multiple OOM strategies can consistently trigger this condition and lead to remote code execution (RCE).
CVE-2026-109566
Rapyd Admin from 9.0.0 before 9.20.0 contains a hard-coded credentials vulnerability that allows remote unauthenticated attackers to gain super-admin access through an AuthSeeder-created admin@laravel account with password admin. The account is seeded by the setup installer and silently re-created on every rpd:make run, letting attackers log in as a global super admin bypassing per-record authorization and tenant scoping.
CVE-2026-109519
A vulnerability was detected in YouTransfer up to 0.0.7/1.0.6/1.1.0. Affected is an unknown function of the file /settings/template of the component Template Rendering. The manipulation results in path traversal. The attack may be launched remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.
CVE-2026-109518
On Debian, Ubuntu, and derivative Linux distributions, an on-path attacker who can manipulate the HTTP traffic (including a malicious mirror or proxy) between an APT client and an archive server triggered by a package install can trick the client into installing an attacker-controlled unverified package and achieve remote code execution with root privileges. The vulnerability is caused by the reuse of hard links and requires the client to follow redirects and retry the download of package files. It requires the client to have a non-zero Acquire::Retries configuration setting; the value 3 is the default starting with Debian 12 (bookworm) and Ubuntu 22.04 LTS (Jammy Jellyfish), so older releases are unaffected in a default configuration
CVE-2026-109506
Multiple TP-Link Wi-Fi range extenders use a custom, reversible XOR-and-dictionary transformation in the HTTP web-management login flow. An unauthenticated attacker on the same local network who can capture the network traffic associated with legitimate administrator login may be able to derive an alternative credential value that produces the same accepted authentication result and use it to authenticate to the device’s web-management interface with administrator privileges. Exploitation requires the management login to use HTTP and the attacker to observe the session key, dictionary, and login value associated with a legitimate administrator login. Successful exploitation may allow an unauthenticated adjacent attacker to gain administrator access to the affected device and modify exposed configuration settings.
CVE-2026-109384
The The Innovative Form Builder – IvyForms plugin for WordPress is vulnerable to Arbitrary File Upload in all versions up to, and including, 1.5.1 via the filterFiletypeAndExt function. This is due to insufficient file type validation due to the absence of a dangerous-extension denylist in the allowed-extensions sanitizer and deliberate override of WordPress's native MIME and extension defences via a registered wp_check_filetype_and_ext filter. This makes it possible for authenticated attackers, with custom-level access and above, to upload files that may be executable, which makes remote code execution possible. An authenticated attacker with the custom add_edit_forms capability must first configure a File Upload field with a dangerous extension (e.g., php) in the allowed-extensions list; once that form is published, any unauthenticated visitor can trigger the actual file upload via the publicly accessible /wp-json/ivyforms/v1/form/submission/ REST route.
CVE-2026-109255
FreeRDP 3.0.0 before 3.32.0 contains an integer truncation vulnerability in license_check_stream_length that allows a malicious RDP server to trigger a heap buffer overflow on 32-bit clients. Attackers can send a crafted SERVER_LICENSE_REQUEST with a large scopeCount that bypasses length checks, causing out-of-bounds writes leading to denial of service or remote code execution.
CVE-2026-108924
A vulnerability was identified in getkirby Kirby up to 4.9.5/5.5.3. Affected by this issue is the function OptionsQuery::resolve of the file src/Option/OptionsQuery.php of the component Dynamic Option Generation. The manipulation leads to authorization bypass. The attack is possible to be carried out remotely. Upgrading to version 4.9.6 and 5.6.0 can resolve this issue. You should upgrade the affected component.
CVE-2026-108598
Floci 1.1.0 before 2.2.0 contains a code injection vulnerability in VtlTemplateEngine that allows unauthenticated attackers to execute commands via unrestricted Velocity mapping templates. Attackers can create a REST API with a MOCK integration whose template uses $util reflection to reach Runtime or ProcessBuilder, executing OS commands in the Floci JVM.
CVE-2026-108592
mini-swe-agent 1.10.0 through 2.4.6 contains an information exposure vulnerability in BubblewrapEnvironment because bwrap omits --clearenv, so sandboxed commands inherit the host environment. Attackers using prompt injection in processed task content can make the agent read API keys from the environment and exfiltrate them over the shared network.
CVE-2026-108578
A vulnerability was identified in Neterbit NW-431F 20250715. Impacted is an unknown function of the file /sms.json of the component Embedded Web Server. Such manipulation leads to information disclosure. The attack may be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.
CVE-2026-108551
openapi-typescript-codegen through 0.31.0 contains a code injection vulnerability that allows attackers controlling an OpenAPI document to inject JavaScript by supplying unescaped values interpolated into single-quoted string literals. Attackers can embed a single quote in path keys, parameter names, servers[0].url, or info.version to execute arbitrary JavaScript when generated clients are imported or service methods called.
CVE-2026-108097
Use of Externally-Controlled Input to Select Classes or Code ('Unsafe Reflection') vulnerability in Drupal Drupal core allows Reflection Injection. This issue affects Drupal core versions: from 8.9.0 to 10.6.19, from 11.0.0 to 11.3.19, from 11.4.0 to 11.4.10, from 12.0.0-alpha1 to 12.0.0-beta2.
CVE-2026-107821
MariaDB server is a community developed fork of MySQL server. From 10.6.1 until 10.6.28, 10.11.19, 11.4.13, 11.8.9, 12.3.3, and 13.0.2, MariaDB insufficiently validated counts, offsets, lengths, and field boundaries in FRM metadata while opening binary FRM files. An attacker able to place a crafted FRM file in the data directory could trigger out-of-bounds reads or writes, crash the server, or potentially execute code. This issue is fixed in versions 10.6.28, 10.11.19, 11.4.13, 11.8.9, 12.3.3, and 13.0.2.
CVE-2026-107806
Nginx UI is a web user interface for the Nginx web server. From 2.3.8 until 2.5.0, an authenticated administrator with an active secure session can submit attacker-controlled portable backup key material and a matching manifest to POST /api/restore. The restore flow trusts the supplied key, decrypts attacker-controlled contents, and replaces the live app.ini, including protected nginx command settings such as TestConfigCmd. Triggering POST /api/nginx/test then executes the restored command in the Nginx UI runtime context, affecting confidentiality, integrity, and availability. This issue is fixed in version 2.5.0.
CVE-2026-107692
The War Thunder game client transmits its authentication bearer token (auth_jwt) in the very first data packet after the TCP handshake, using only LZ4 compression rather than encryption. An attacker positioned on the network path can passively intercept and decompress this packet to reveal the plaintext JSON payload. This vulnerability allows for temporary authenticated impersonation, enabling an attacker to access game services and certain user data (such as email address and displayed phone number) as the affected user. While this allows for unauthorized access to gameplay, it does not facilitate full account takeover, as it cannot be used to modify account security settings, change passwords, bypass two-factor authentication for account management, or access financial information.
CVE-2026-107441
An out-of-bounds write vulnerability in the CGI program of Zyxel GS1900-24E firmware versions through 2.90(AAHK.2)C0 could allow an unauthenticated adjacent attacker to exploit the flaw and potentially execute OS commands via a crafted HTTP request.
CVE-2026-107406
Memory overflow vulnerability leading to Remote Code Execution or Denial of Service Vulnerability in NetScaler ADC. NetScaler ADC or NetScaler Gateway must be configured as a SAML SP or SAML IdP, subject to the following version-specific requirements: * For the following versions: Applicable only when configured as a SAML IdP: * NetScaler ADC and NetScaler Gateway between 14.1-73.37 and 14.1-73.41, inclusive * NetScaler ADC 14.1-FIPS between 14.1-73.37 FIPS and 14.1-73.41 FIPS, inclusive * NetScaler ADC and NetScaler Gateway between 13.1-64.23 and 13.1-64.28, inclusive * NetScaler ADC 13.1-FIPS between 13.1-NDcPP 13.1-37.279 and 13.1- 37.282, inclusive For the following versions: Applicable only when configured as a SAML SP or SAML IdP: * NetScaler ADC and NetScaler Gateway before 14.1-73.37 * NetScaler ADC 14.1-FIPS before 14.1-73.37 FIPS * NetScaler ADC and NetScaler Gateway before 13.1-64.23 * NetScaler ADC 13.1-FIPS before13.1-NDcPP 13.1-37.279
CVE-2026-107329
IBM Langflow OSS 1.0.0 through 1.12.4 could allow a remote authenticated attacker to execute arbitrary code due to improper control of code generation.
CVE-2026-107328
IBM Langflow OSS 1.0.0 through 1.12.4 could allow a remote authenticated attacker to execute arbitrary code due to improper neutralization of code in eval/exec.
CVE-2026-107327
IBM Langflow OSS 1.0.0 through 1.12.4 could allow a remote authenticated attacker to execute arbitrary code due to missing authorization.
CVE-2026-107326
IBM Langflow OSS 1.0.0 through 1.12.4 could allow a remote authenticated attacker to execute arbitrary code due to improper neutralization of special elements used in an OS command.
CVE-2026-107268
Insertion of Sensitive Information Into Sent Data vulnerability in Drupal Two Factor Authentication - TFA / Passwordless Login allows Forceful Browsing. This issue affects Two Factor Authentication - TFA / Passwordless Login versions: from 0.0.0 to 5.4.1, from 5.5.0 to 5.5.2.
CVE-2026-107181
Telegram Desktop before 7.2.9 contains an IPC record-separator injection vulnerability in Core::Sandbox that allows remote attackers to inject OPEN: records via crafted tg:// links containing unescaped semicolons. Attackers can reach the interpret: scheme handler to upload local files, including tdata session keys, to an attacker channel, enabling account takeover.
CVE-2026-107159
MiniUPnPd through 2.3.11 built with --strict contains a divide-by-zero vulnerability in ProcessSSDPData() that allows unauthenticated local network attackers to crash the daemon. Attackers can send a single multicast M-SEARCH datagram with MX: 0 and a known ST to port 1900, triggering SIGFPE and denying UPnP IGD service.
CVE-2026-107092
NexoPOS v6.2.4 is vulnerable to Directory Traversal via the api/update endpoint.
CVE-2026-107084
Slims (Senayan Library Management Systems) 9 Bulian 9.8.0 allows cross-site request forgery (CSRF) against admin/modules/circulation/loan_history_maintenance.php because the action=run GET parameter performs privileged, destructive operations with no CSRF token or POST confirmation, leading to data loss of loan history records.
CVE-2026-107083
SENAYAN Library Management System (SLiMS) Bulian (slims9_bulian) 9.8.0 is vulnerable to SQL Injection in admin/modules/reporting/customs/dl_detail.php via the parameter fileID.
CVE-2026-107082
Slims (Senayan Library Management Systems) 9 Bulian 9.8.0 allows an authenticated staff user to perform SQL injection via the opac_hide and promoted GET parameters of admin/modules/bibliography/index.php, because escape_string() is applied but the values are concatenated into an unquoted numeric SQL context, leading to error-based information disclosure and arbitrary data extraction.
CVE-2026-107081
SQL injection via identifier injection in the tableName and tableFields POST parameters of admin AJAX endpoints (admin/AJAX_lookup_handler.php, admin/AJAX_check_id.php, admin/AJAX_vocabolary_control.php) in SENAYAN Library Management System (SLiMS) Bulian 9.8.0 allows any authenticated staff user to extract arbitrary database contents.
CVE-2026-107079
An issue in Systrome Validation & Certification 1.0 allows an attacker to cause a denial of service via the t URL parameter in the qrcode_auth.html component
CVE-2026-106991
hustoj >=24.09.10 and <=26.08.19 is vulnerable to Incorrect Access Control. Any registered user can delete, lock, or sticky any forum thread (including admins' announcements) via threadadmin.php. The thread branch only verifies login, never authorship or admin rights.
CVE-2026-106781
An issue in WCH CH340/CH341 USB-to-Serial Windows Driver setup package CH341SER.EXE version 4.0 allows a local attacker to escalate privileges.
CVE-2026-106686
https://github.com/zfzhou0202/CVE-2026-106686
CVE-2026-106610
Incorrect Privilege Assignment vulnerability in miniOrange miniorange otp verification miniorange-otp-verification allows Privilege Escalation.This issue affects miniorange otp verification: from n/a through 5.5.7.
CVE-2026-106445
Handlebars provides the power necessary to let users build semantic templates. From 3.0.0 until 4.7.10, Handlebars lookupProperty returns Function.prototype.constructor before applying the prototype-access deny list because constructor is an own property of Function.prototype. When an attacker can render a controlled template with allowProtoMethodsByDefault enabled and an accessible function in the template context, the template can traverse from that function through its prototype to Function.prototype and then obtain the Function constructor through the own-property bypass. This permits attacker-controlled JavaScript to execute with the server application's privileges. This issue is fixed in version 4.7.10.
CVE-2026-106378
Privilege elevation in Sandbox in Google Chrome on on Mac prior to 155.0.8059.39 allowed a remote attacker who had compromised the renderer process to execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: Medium)
CVE-2026-106173
A improper limitation of a pathname to a restricted directory ('path traversal') vulnerability in Fortinet FortiSIEM 7.5.0 may allow attacker to execute unauthorized code or commands via specially crafted packets.
CVE-2026-106074
A flaw in Node.js `crypto` causes the internal entropy caches used by `crypto.randomUUID()`, `crypto.randomUUIDv7()`, and `crypto.randomInt()` to be saved into user-land startup snapshots (`--build-snapshot`) and single executable applications built with `useSnapshot`. If any of these functions, or an API that relies on them such as `URL.createObjectURL()`, is called while the snapshot is built, every process started from that snapshot returns the same values until the cache is refilled: up to 127 UUIDs and about 1,000 `randomInt()` values. Identifiers expected to be unique can collide across processes, and values issued by one process can be predicted by observing another. This vulnerability affects Node.js **26.x**, **24.x**, and **22.x**.
CVE-2026-106073
A flaw in Node.js Permission Model filesystem enforcement leaves `fs.realpathSync()` without the required read permission checks. This is an incomplete fix of CVE-2026-21715, which only covered `fs.realpathSync.native()`. As a result, code running under `--permission` with restricted `--allow-fs-read` can still use `fs.realpathSync()` to check file existence, resolve symlink targets, and enumerate filesystem paths outside of permitted directories. This vulnerability affects Node.js **26.x**, **24.x**, and **22.x**.
CVE-2026-106072
A flaw in Node.js TLS hostname verification allows a certificate with only a DNS SAN to authenticate an IP endpoint when the client connects using a non-canonical IPv4 spelling, such as `0177.0.0.1`, `0x7f.0.0.1`, `2130706433` or `127.1`. `tls.checkServerIdentity()` did not classify these hosts as IP addresses, but normalized them to their canonical form and matched the result against the certificate DNS names. A certificate containing `DNS:127.0.0.1` and no `IP Address:127.0.0.1` SAN was therefore accepted, while the same certificate is correctly rejected for `127.0.0.1`. Exploitation requires a certificate with a numeric DNS SAN issued by a CA trusted by the client, and a platform resolver that accepts these spellings, such as glibc. This vulnerability affects Node.js **26.x**, **24.x**, and **22.x**.
CVE-2026-106071
A flaw in Node.js Permission Model filesystem enforcement can grant access to paths that do not match a wildcard `--allow-fs-read` or `--allow-fs-write` rule. When the requested path is shorter than the prefix of a wildcard grant, the radix tree lookup stops comparing early and treats the path as a match. For example, `--allow-fs-read=/etc/passwd.*` also allows reading `/etc/passwd`. This requires the wildcard grant to sit directly under the root of the permission tree, for example when it is the only grant for that scope. This is a different root cause from CVE-2026-58043. This vulnerability affects Node.js **26.x**.
CVE-2026-106070
A flaw in the Node.js `zlib.ZipFile` API can cause it to return bytes that do not belong to the requested entry after the local and central header validation fails. When `zipEntry.modified` is read on an archive whose local header does not match its central directory, either directly or while compacting the archive, the validation error is caught but the parsed local header is left cached without a content offset. A later content read then returns attacker-controlled bytes from the start of the file instead of rejecting the archive, and CRC-32 verification still passes because the attacker controls the central directory CRC. A Node.js-based scanner can therefore approve different content from what another ZIP implementation extracts from the same archive. This vulnerability affects Node.js **26.x**.
CVE-2026-106069
A flaw in Node.js TLS hostname verification can cause a server certificate to be validated against a different IP address than the one the client connected to, when the host is a non-canonical IPv4 literal with a leading zero, such as `0127.0.0.1`. `tls.checkServerIdentity()` normalizes the host following the WHATWG URL rules, which read a leading-zero octet as octal (`0127.0.0.1` becomes `87.0.0.1`), while the connection is made through the operating system resolver, which on some platforms such as macOS reads it as decimal (`127.0.0.1`). A server at the connected address can then be authenticated with a certificate issued for another IP address. This vulnerability affects Node.js **26.x**, **24.x**, and **22.x**.
CVE-2026-105950
A security vulnerability has been detected in getformwork formwork up to 2.3.12. Impacted is the function DomSanitizer::sanitizeNodeAttribute of the file formwork/src/Sanitizer/DomSanitizer.php of the component URI Sanitizer. Such manipulation of the argument formaction leads to cross site scripting. The attack may be launched remotely. Upgrading to version 2.3.13 is recommended to address this issue. The name of the patch is 729701e59c5886685c5a1d477bdc3035e41f18b1. Upgrading the affected component is advised.
