CVE Feed

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix IS_CHECKPOINTED flag inconsistency issue caused by concurrent atomic commit and checkpoint writes During SPO tests, when mounting F2FS, an -EINVAL error was returned from f2fs_recover_inode_page. The issue occurred under the following scenario Thread A Thread B f2fs_ioc_commit_atomic_write - f2fs_do_sync_file // atomic = true - f2fs_fsync_node_pages : last_folio = inode folio : schedule before folio_lock(last_folio) f2fs_write_checkpoint - block_operations// writeback last_folio - schedule before f2fs_flush_nat_entries : set_fsync_mark(last_folio, 1) : set_dentry_mark(last_folio, 1) : folio_mark_dirty(last_folio) - __write_node_folio(last_folio) : f2fs_down_read(&sbi->node_write)//block - f2fs_flush_nat_entries : {struct nat_entry}->flag |= BIT(IS_CHECKPOINTED) - unblock_operations : f2fs_up_write(&sbi->node_write) f2fs_write_checkpoint//return : f2fs_do_write_node_page() f2fs_ioc_commit_atomic_write//return SPO Thread A calls f2fs_need_dentry_mark(sbi, ino), and the last_folio has already been written once. However, the {struct nat_entry}->flag did not have the IS_CHECKPOINTED set, causing set_dentry_mark(last_folio, 1) and write last_folio again after Thread B finishes f2fs_write_checkpoint. After SPO and reboot, it was detected that {struct node_info}->blk_addr was not NULL_ADDR because Thread B successfully write the checkpoint. This issue only occurs in atomic write scenarios. For regular file fsync operations, the folio must be dirty. If block_operations->f2fs_sync_node_pages successfully submit the folio write, this path will not be executed. Otherwise, the f2fs_write_checkpoint will need to wait for the folio write submission to complete, as sbi->nr_pages[F2FS_DIRTY_NODES] > 0. Therefore, the situation where f2fs_need_dentry_mark checks that the {struct nat_entry}->flag /wo the IS_CHECKPOINTED flag, but the folio write has already been submitted, will not occur. Therefore, for atomic file fsync, sbi->node_write should be acquired through __write_node_folio to ensure that the IS_CHECKPOINTED flag correctly indicates that the checkpoint write has been completed.

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_gate: snapshot parameters with RCU on replace The gate action can be replaced while the hrtimer callback or dump path is walking the schedule list. Convert the parameters to an RCU-protected snapshot and swap updates under tcf_lock, freeing the previous snapshot via call_rcu(). When REPLACE omits the entry list, preserve the existing schedule so the effective state is unchanged.

In the Linux kernel, the following vulnerability has been resolved: xfs: only call xf{array,blob}_destroy if we have a valid pointer Only call the xfarray and xfblob destructor if we have a valid pointer, and be sure to null out that pointer afterwards. Note that this patch fixes a large number of commits, most of which were merged between 6.9 and 6.10.

In the Linux kernel, the following vulnerability has been resolved: xfs: check for deleted cursors when revalidating two btrees The free space and inode btree repair functions will rebuild both btrees at the same time, after which it needs to evaluate both btrees to confirm that the corruptions are gone. However, Jiaming Zhang ran syzbot and produced a crash in the second xchk_allocbt call. His root-cause analysis is as follows (with minor corrections): In xrep_revalidate_allocbt(), xchk_allocbt() is called twice (first for BNOBT, second for CNTBT). The cause of this issue is that the first call nullified the cursor required by the second call. Let's first enter xrep_revalidate_allocbt() via following call chain: xfs_file_ioctl() -> xfs_ioc_scrubv_metadata() -> xfs_scrub_metadata() -> `sc->ops->repair_eval(sc)` -> xrep_revalidate_allocbt() xchk_allocbt() is called twice in this function. In the first call: /* Note that sc->sm->sm_type is XFS_SCRUB_TYPE_BNOPT now */ xchk_allocbt() -> xchk_btree() -> `bs->scrub_rec(bs, recp)` -> xchk_allocbt_rec() -> xchk_allocbt_xref() -> xchk_allocbt_xref_other() since sm_type is XFS_SCRUB_TYPE_BNOBT, pur is set to &sc->sa.cnt_cur. Kernel called xfs_alloc_get_rec() and returned -EFSCORRUPTED. Call chain: xfs_alloc_get_rec() -> xfs_btree_get_rec() -> xfs_btree_check_block() -> (XFS_IS_CORRUPT || XFS_TEST_ERROR), the former is false and the latter is true, return -EFSCORRUPTED. This should be caused by ioctl$XFS_IOC_ERROR_INJECTION I guess. Back to xchk_allocbt_xref_other(), after receiving -EFSCORRUPTED from xfs_alloc_get_rec(), kernel called xchk_should_check_xref(). In this function, *curpp (points to sc->sa.cnt_cur) is nullified. Back to xrep_revalidate_allocbt(), since sc->sa.cnt_cur has been nullified, it then triggered null-ptr-deref via xchk_allocbt() (second call) -> xchk_btree(). So. The bnobt revalidation failed on a cross-reference attempt, so we deleted the cntbt cursor, and then crashed when we tried to revalidate the cntbt. Therefore, check for a null cntbt cursor before that revalidation, and mark the repair incomplete. Also we can ignore the second tree entirely if the first tree was rebuilt but is already corrupt. Apply the same fix to xrep_revalidate_iallocbt because it has the same problem.

In the Linux kernel, the following vulnerability has been resolved: perf/core: Fix refcount bug and potential UAF in perf_mmap Syzkaller reported a refcount_t: addition on 0; use-after-free warning in perf_mmap. The issue is caused by a race condition between a failing mmap() setup and a concurrent mmap() on a dependent event (e.g., using output redirection). In perf_mmap(), the ring_buffer (rb) is allocated and assigned to event->rb with the mmap_mutex held. The mutex is then released to perform map_range(). If map_range() fails, perf_mmap_close() is called to clean up. However, since the mutex was dropped, another thread attaching to this event (via inherited events or output redirection) can acquire the mutex, observe the valid event->rb pointer, and attempt to increment its reference count. If the cleanup path has already dropped the reference count to zero, this results in a use-after-free or refcount saturation warning. Fix this by extending the scope of mmap_mutex to cover the map_range() call. This ensures that the ring buffer initialization and mapping (or cleanup on failure) happens atomically effectively, preventing other threads from accessing a half-initialized or dying ring buffer.

In the Linux kernel, the following vulnerability has been resolved: LoongArch: Enable exception fixup for specific ADE subcode This patch allows the LoongArch BPF JIT to handle recoverable memory access errors generated by BPF_PROBE_MEM* instructions. When a BPF program performs memory access operations, the instructions it executes may trigger ADEM exceptions. The kernel’s built-in BPF exception table mechanism (EX_TYPE_BPF) will generate corresponding exception fixup entries in the JIT compilation phase; however, the architecture-specific trap handling function needs to proactively call the common fixup routine to achieve exception recovery. do_ade(): fix EX_TYPE_BPF memory access exceptions for BPF programs, ensure safe execution. Relevant test cases: illegal address access tests in module_attach and subprogs_extable of selftests/bpf.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix reservation leak in some error paths when inserting inline extent If we fail to allocate a path or join a transaction, we return from __cow_file_range_inline() without freeing the reserved qgroup data, resulting in a leak. Fix this by ensuring we call btrfs_qgroup_free_data() in such cases.

In the Linux kernel, the following vulnerability has been resolved: fs: ntfs3: fix infinite loop triggered by zero-sized ATTR_LIST We found an infinite loop bug in the ntfs3 file system that can lead to a Denial-of-Service (DoS) condition. A malformed NTFS image can cause an infinite loop when an ATTR_LIST attribute indicates a zero data size while the driver allocates memory for it. When ntfs_load_attr_list() processes a resident ATTR_LIST with data_size set to zero, it still allocates memory because of al_aligned(0). This creates an inconsistent state where ni->attr_list.size is zero, but ni->attr_list.le is non-null. This causes ni_enum_attr_ex to incorrectly assume that no attribute list exists and enumerates only the primary MFT record. When it finds ATTR_LIST, the code reloads it and restarts the enumeration, repeating indefinitely. The mount operation never completes, hanging the kernel thread. This patch adds validation to ensure that data_size is non-zero before memory allocation. When a zero-sized ATTR_LIST is detected, the function returns -EINVAL, preventing a DoS vulnerability.

In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Fix potential NULL pointer dereference in header processing If siw_get_hdr() returns -EINVAL before set_rx_fpdu_context(), qp->rx_fpdu can be NULL. The error path in siw_tcp_rx_data() dereferences qp->rx_fpdu->more_ddp_segs without checking, which may lead to a NULL pointer deref. Only check more_ddp_segs when rx_fpdu is present. KASAN splat: [ 101.384271] KASAN: null-ptr-deref in range [0x00000000000000c0-0x00000000000000c7] [ 101.385869] RIP: 0010:siw_tcp_rx_data+0x13ad/0x1e50

In the Linux kernel, the following vulnerability has been resolved: fs: ntfs3: check return value of indx_find to avoid infinite loop We found an infinite loop bug in the ntfs3 file system that can lead to a Denial-of-Service (DoS) condition. A malformed dentry in the ntfs3 filesystem can cause the kernel to hang during the lookup operations. By setting the HAS_SUB_NODE flag in an INDEX_ENTRY within a directory's INDEX_ALLOCATION block and manipulating the VCN pointer, an attacker can cause the indx_find() function to repeatedly read the same block, allocating 4 KB of memory each time. The kernel lacks VCN loop detection and depth limits, causing memory exhaustion and an OOM crash. This patch adds a return value check for fnd_push() to prevent a memory exhaustion vulnerability caused by infinite loops. When the index exceeds the size of the fnd->nodes array, fnd_push() returns -EINVAL. The indx_find() function checks this return value and stops processing, preventing further memory allocation.

In the Linux kernel, the following vulnerability has been resolved: net: liquidio: Fix off-by-one error in PF setup_nic_devices() cleanup In setup_nic_devices(), the initialization loop jumps to the label setup_nic_dev_free on failure. The current cleanup loop while(i--) skip the failing index i, causing a memory leak. Fix this by changing the loop to iterate from the current index i down to 0. Also, decrement i in the devlink_alloc failure path to point to the last successfully allocated index. Compile tested only. Issue found using code review.

In the Linux kernel, the following vulnerability has been resolved: net: liquidio: Fix off-by-one error in VF setup_nic_devices() cleanup In setup_nic_devices(), the initialization loop jumps to the label setup_nic_dev_free on failure. The current cleanup loop while(i--) skip the failing index i, causing a memory leak. Fix this by changing the loop to iterate from the current index i down to 0. Compile tested only. Issue found using code review.

In the Linux kernel, the following vulnerability has been resolved: net/sched: Only allow act_ct to bind to clsact/ingress qdiscs and shared blocks As Paolo said earlier [1]: "Since the blamed commit below, classify can return TC_ACT_CONSUMED while the current skb being held by the defragmentation engine. As reported by GangMin Kim, if such packet is that may cause a UaF when the defrag engine later on tries to tuch again such packet." act_ct was never meant to be used in the egress path, however some users are attaching it to egress today [2]. Attempting to reach a middle ground, we noticed that, while most qdiscs are not handling TC_ACT_CONSUMED, clsact/ingress qdiscs are. With that in mind, we address the issue by only allowing act_ct to bind to clsact/ingress qdiscs and shared blocks. That way it's still possible to attach act_ct to egress (albeit only with clsact). [1] https://lore.kernel.org/netdev/674b8cbfc385c6f37fb29a1de08d8fe5c2b0fbee.1771321118.git.pabeni@redhat.com/ [2] https://lore.kernel.org/netdev/[email protected]/

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: bounds-check link_id in ieee80211_ml_reconfiguration link_id is taken from the ML Reconfiguration element (control & 0x000f), so it can be 0..15. link_removal_timeout[] has IEEE80211_MLD_MAX_NUM_LINKS (15) elements, so index 15 is out-of-bounds. Skip subelements with link_id >= IEEE80211_MLD_MAX_NUM_LINKS to avoid a stack out-of-bounds write.

In the Linux kernel, the following vulnerability has been resolved: xfs: check return value of xchk_scrub_create_subord Fix this function to return NULL instead of a mangled ENOMEM, then fix the callers to actually check for a null pointer and return ENOMEM. Most of the corrections here are for code merged between 6.2 and 6.10.

In the Linux kernel, the following vulnerability has been resolved: nvme: fix memory allocation in nvme_pr_read_keys() nvme_pr_read_keys() takes num_keys from userspace and uses it to calculate the allocation size for rse via struct_size(). The upper limit is PR_KEYS_MAX (64K). A malicious or buggy userspace can pass a large num_keys value that results in a 4MB allocation attempt at most, causing a warning in the page allocator when the order exceeds MAX_PAGE_ORDER. To fix this, use kvzalloc() instead of kzalloc(). This bug has the same reasoning and fix with the patch below: https://lore.kernel.org/linux-block/[email protected]/ Warning log: WARNING: mm/page_alloc.c:5216 at __alloc_frozen_pages_noprof+0x5aa/0x2300 mm/page_alloc.c:5216, CPU#1: syz-executor117/272 Modules linked in: CPU: 1 UID: 0 PID: 272 Comm: syz-executor117 Not tainted 6.19.0 #1 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:__alloc_frozen_pages_noprof+0x5aa/0x2300 mm/page_alloc.c:5216 Code: ff 83 bd a8 fe ff ff 0a 0f 86 69 fb ff ff 0f b6 1d f9 f9 c4 04 80 fb 01 0f 87 3b 76 30 ff 83 e3 01 75 09 c6 05 e4 f9 c4 04 01 <0f> 0b 48 c7 85 70 fe ff ff 00 00 00 00 e9 8f fd ff ff 31 c0 e9 0d RSP: 0018:ffffc90000fcf450 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 1ffff920001f9ea0 RDX: 0000000000000000 RSI: 000000000000000b RDI: 0000000000040dc0 RBP: ffffc90000fcf648 R08: ffff88800b6c3380 R09: 0000000000000001 R10: ffffc90000fcf840 R11: ffff88807ffad280 R12: 0000000000000000 R13: 0000000000040dc0 R14: 0000000000000001 R15: ffffc90000fcf620 FS: 0000555565db33c0(0000) GS:ffff8880be26c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000002000000c CR3: 0000000003b72000 CR4: 00000000000006f0 Call Trace: <TASK> alloc_pages_mpol+0x236/0x4d0 mm/mempolicy.c:2486 alloc_frozen_pages_noprof+0x149/0x180 mm/mempolicy.c:2557 ___kmalloc_large_node+0x10c/0x140 mm/slub.c:5598 __kmalloc_large_node_noprof+0x25/0xc0 mm/slub.c:5629 __do_kmalloc_node mm/slub.c:5645 [inline] __kmalloc_noprof+0x483/0x6f0 mm/slub.c:5669 kmalloc_noprof include/linux/slab.h:961 [inline] kzalloc_noprof include/linux/slab.h:1094 [inline] nvme_pr_read_keys+0x8f/0x4c0 drivers/nvme/host/pr.c:245 blkdev_pr_read_keys block/ioctl.c:456 [inline] blkdev_common_ioctl+0x1b71/0x29b0 block/ioctl.c:730 blkdev_ioctl+0x299/0x700 block/ioctl.c:786 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x1bf/0x220 fs/ioctl.c:583 x64_sys_call+0x1280/0x21b0 mnt/fuzznvme_1/fuzznvme/linux-build/v6.19/./arch/x86/include/generated/asm/syscalls_64.h:17 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x71/0x330 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fb893d3108d Code: 28 c3 e8 46 1e 00 00 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffff61f2f38 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffff61f3138 RCX: 00007fb893d3108d RDX: 0000000020000040 RSI: 00000000c01070ce RDI: 0000000000000003 RBP: 0000000000000001 R08: 0000000000000000 R09: 00007ffff61f3138 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001 R13: 00007ffff61f3128 R14: 00007fb893dae530 R15: 0000000000000001 </TASK>

In the Linux kernel, the following vulnerability has been resolved: fs: ntfs3: fix infinite loop in attr_load_runs_range on inconsistent metadata We found an infinite loop bug in the ntfs3 file system that can lead to a Denial-of-Service (DoS) condition. A malformed NTFS image can cause an infinite loop when an attribute header indicates an empty run list, while directory entries reference it as containing actual data. In NTFS, setting evcn=-1 with svcn=0 is a valid way to represent an empty run list, and run_unpack() correctly handles this by checking if evcn + 1 equals svcn and returning early without parsing any run data. However, this creates a problem when there is metadata inconsistency, where the attribute header claims to be empty (evcn=-1) but the caller expects to read actual data. When run_unpack() immediately returns success upon seeing this condition, it leaves the runs_tree uninitialized with run->runs as a NULL. The calling function attr_load_runs_range() assumes that a successful return means that the runs were loaded and sets clen to 0, expecting the next run_lookup_entry() call to succeed. Because runs_tree remains uninitialized, run_lookup_entry() continues to fail, and the loop increments vcn by zero (vcn += 0), leading to an infinite loop. This patch adds a retry counter to detect when run_lookup_entry() fails consecutively after attr_load_runs_vcn(). If the run is still not found on the second attempt, it indicates corrupted metadata and returns -EINVAL, preventing the Denial-of-Service (DoS) vulnerability.

In the Linux kernel, the following vulnerability has been resolved: btrfs: do not free data reservation in fallback from inline due to -ENOSPC If we fail to create an inline extent due to -ENOSPC, we will attempt to go through the normal COW path, reserve an extent, create an ordered extent, etc. However we were always freeing the reserved qgroup data, which is wrong since we will use data. Fix this by freeing the reserved qgroup data in __cow_file_range_inline() only if we are not doing the fallback (ret is <= 0).

Out of bounds read in Blink in Google Chrome prior to 146.0.7680.153 allowed a remote attacker to perform an out of bounds memory read via a crafted HTML page. (Chromium security severity: High)

Use after free in Network in Google Chrome prior to 146.0.7680.153 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High)

The WiFi Extender WDR201A (HW V2.1, FW LFMZX28040922V1.02) implements a broken authentication mechanism in its web management interface. The login page does not properly enforce session validation, allowing attackers to bypass authentication by directly accessing restricted web application endpoints through forced browsing

Heap buffer overflow in WebAudio in Google Chrome prior to 146.0.7680.153 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High)

MuraCMS through 10.1.10 contains a CSRF vulnerability that allows attackers to permanently destroy all deleted content stored in the trash system through a simple CSRF attack. The vulnerable cTrash.empty function lacks CSRF token validation, enabling malicious websites to forge requests that irreversibly delete all trashed content when an authenticated administrator visits a crated webpage. Successful exploitation of the CSRF vulnerability results in potentially catastrophic data loss within the MuraCMS system. When an authenticated administrator visits a malicious page containing the CSRF exploit, their browser automatically submits a hidden form that permanently empties the entire trash system without any validation, confirmation dialog, or user consent.

The import form CSRF vulnerability in MuraCMS through 10.1.10 allows attackers to upload and install malicious form definitions through a CSRF attack. The vulnerable cForm.importform function lacks CSRF token validation, enabling malicious websites to forge file upload requests that install attacker-controlled forms when an authenticated administrator visits a crafted webpage. Full exploitation of this vulnerability would require the victim to select a malicious ZIP file containing form definitions, which can be automatically generated by the exploit page and used to create data collection forms that steal sensitive information. Successful exploitation of the import form CSRF vulnerability could result in the installation of malicious data collection forms on the target MuraCMS website that can steal sensitive user information. When an authenticated administrator visits a malicious webpage containing the CSRF exploit and selects the attacker-generated ZIP file, their browser uploads and installs form definitions that create legitimate forms that could be designed with malicious content.

Out of bounds write in V8 in Google Chrome prior to 146.0.7680.153 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High)

Heap buffer overflow in CSS in Google Chrome prior to 146.0.7680.153 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High)

Out of bounds read and write in WebGL in Google Chrome prior to 146.0.7680.153 allowed a remote attacker to perform arbitrary read/write via a crafted HTML page. (Chromium security severity: Critical)

Buffer Overflow vulnerability in giflib v.5.2.2 allows a remote attacker to cause a denial of service via the EGifGCBToExtension overwriting an existing Graphic Control Extension block without validating its allocated size.

The update address CSRF vulnerability in MuraCMS through 10.1.10 allows attackers to manipulate user address information through CSRF. The vulnerable cUsers.updateAddress function lacks CSRF token validation, enabling malicious websites to forge requests that add, modify, or delete user addresses when an authenticated administrator visits a crafted webpage. Successful exploitation of the update address CSRF vulnerability results in unauthorized manipulation of user address information within the MuraCMS system, potentially compromising user data integrity and organizational communications. When an authenticated administrator visits a malicious webpage containing the CSRF exploit, their browser automatically submits a hidden form that can add malicious addresses with attacker-controlled email addresses and phone numbers, update existing addresses to redirect communications to attacker-controlled locations or deleted legitimate address records to disrupt business operations. This can lead to misdirected sensitive communications, compromise of user privacy through injection of attacker contact information, disruption of legitimate business correspondence, and potential social engineering attacks via the corrupted address data.

MuraCMS through 10.1.10 contains a CSRF vulnerability in the Add To Group functionality for user management (cUsers.cfc addToGroup method) that allows attackers to escalate privileges by adding any user to any group without proper authorization checks. The vulnerable function lacks CSRF token validation and directly processes user-supplied userId and groupId parameters via getUserManager().createUserInGorup(), enabling malicious websites to forge requests that automatically execute when an authenticated administrator visits a crafted page. Adding a user to the Super Admins group (s2 user) is not possible. Successful exploitation results in the attacker gaining privilege escalation both horizontally to other groups and vertically to the admin group. Escalation to the s2 User group is not possible.

Use after free in Extensions in Google Chrome prior to 146.0.7680.153 allowed an attacker who convinced a user to install a malicious extension to potentially exploit heap corruption via a crafted Chrome Extension. (Chromium security severity: High)

Out of bounds read in Skia in Google Chrome prior to 146.0.7680.153 allowed a remote attacker to perform an out of bounds memory read via a crafted HTML page. (Chromium security severity: High)

Use after free in Digital Credentials API in Google Chrome prior to 146.0.7680.153 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High)

Integer overflow in ANGLE in Google Chrome on Windows prior to 146.0.7680.153 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High)

Heap buffer overflow in ANGLE in Google Chrome prior to 146.0.7680.153 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High)

Out of bounds memory access in WebGL in Google Chrome on Android prior to 146.0.7680.153 allowed a remote attacker to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Critical)

Integer overflow in ANGLE in Google Chrome prior to 146.0.7680.153 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: Medium)

Heap buffer overflow in WebRTC in Google Chrome prior to 146.0.7680.153 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High)

Inappropriate implementation in V8 in Google Chrome prior to 146.0.7680.153 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High)

Out of bounds read and write in WebAudio in Google Chrome prior to 146.0.7680.153 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High)

Type Confusion in V8 in Google Chrome prior to 146.0.7680.153 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High)

Heap buffer overflow in PDFium in Google Chrome prior to 146.0.7680.153 allowed a remote attacker to potentially exploit heap corruption via a crafted PDF file. (Chromium security severity: High)

Integer overflow in Dawn in Google Chrome on Mac prior to 146.0.7680.153 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: High)

Insufficient validation of untrusted input in Navigation in Google Chrome prior to 146.0.7680.153 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: High)

Use after free in Blink in Google Chrome prior to 146.0.7680.153 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High)

Use after free in WebRTC in Google Chrome prior to 146.0.7680.153 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High)

Stack buffer overflow in WebRTC in Google Chrome prior to 146.0.7680.153 allowed a remote attacker to potentially exploit stack corruption via a crafted HTML page. (Chromium security severity: High)

Use after free in Base in Google Chrome prior to 146.0.7680.153 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: Critical)

A zip slip vulnerability in the Admin import functionality of CTFd v3.8.1-18-gdb5a18c4 allows attackers to write arbitrary files outside the intended directories via supplying a crafted import.

The Trash Restore CSRF vulnerability in MuraCMS through 10.1.10 allows attackers to restore deleted content from the trash to unauthorized locations through CSRF. The vulnerable cTrash.restore function lacks CSRF token validation, enabling malicious websites to forge requests that restore content to arbitrary parent locations when an authenticated administrator visits a crafted webpage. Successful exploitation of the Trash Restore CSRF vulnerability results in unauthorized restoration of deleted content to potentially inappropriate or malicious locations within the MuraCMS website structure. When an authenticated administrator visits a malicious webpage containing the CSRF exploit, their browser automatically submits a hidden form that restores specified content from the trash to a location determined by the attacker through the parentid parameter. This can lead to restoration of previously deleted malicious content, placement of sensitive documents in public areas, manipulation of website navigation structure, or restoration of outdated content that was intentionally removed for security or compliance reasons.