CVE Feed

The web interface of the WiFi Extender WDR201A (HW V2.1, FW LFMZX28040922V1.02) contains hardcoded credential disclosure mechanisms (in the form of Server Side Include) within multiple server-side web pages, including login.shtml and settings.shtml. These pages embed server-side execution directives that dynamically retrieve and expose the web administration password from non-volatile memory at runtime.

A lack of path validation in aaPanel v7.57.0 allows attackers to execute a local file inclusion (LFI), leadingot sensitive information exposure.

In the Linux kernel, the following vulnerability has been resolved: io_uring/zcrx: fix page array leak d9f595b9a65e ("io_uring/zcrx: fix leaking pages on sg init fail") fixed a page leakage but didn't free the page array, release it as well.

In the Linux kernel, the following vulnerability has been resolved: gve: Fix stats report corruption on queue count change The driver and the NIC share a region in memory for stats reporting. The NIC calculates its offset into this region based on the total size of the stats region and the size of the NIC's stats. When the number of queues is changed, the driver's stats region is resized. If the queue count is increased, the NIC can write past the end of the allocated stats region, causing memory corruption. If the queue count is decreased, there is a gap between the driver and NIC stats, leading to incorrect stats reporting. This change fixes the issue by allocating stats region with maximum size, and the offset calculation for NIC stats is changed to match with the calculation of the NIC.

In the Linux kernel, the following vulnerability has been resolved: media: dvb-core: fix wrong reinitialization of ringbuffer on reopen dvb_dvr_open() calls dvb_ringbuffer_init() when a new reader opens the DVR device. dvb_ringbuffer_init() calls init_waitqueue_head(), which reinitializes the waitqueue list head to empty. Since dmxdev->dvr_buffer.queue is a shared waitqueue (all opens of the same DVR device share it), this orphans any existing waitqueue entries from io_uring poll or epoll, leaving them with stale prev/next pointers while the list head is reset to {self, self}. The waitqueue and spinlock in dvr_buffer are already properly initialized once in dvb_dmxdev_init(). The open path only needs to reset the buffer data pointer, size, and read/write positions. Replace the dvb_ringbuffer_init() call in dvb_dvr_open() with direct assignment of data/size and a call to dvb_ringbuffer_reset(), which properly resets pread, pwrite, and error with correct memory ordering without touching the waitqueue or spinlock.

In the Linux kernel, the following vulnerability has been resolved: net: add proper RCU protection to /proc/net/ptype Yin Fengwei reported an RCU stall in ptype_seq_show() and provided a patch. Real issue is that ptype_seq_next() and ptype_seq_show() violate RCU rules. ptype_seq_show() runs under rcu_read_lock(), and reads pt->dev to get device name without any barrier. At the same time, concurrent writers can remove a packet_type structure (which is correctly freed after an RCU grace period) and clear pt->dev without an RCU grace period. Define ptype_iter_state to carry a dev pointer along seq_net_private: struct ptype_iter_state { struct seq_net_private p; struct net_device *dev; // added in this patch }; We need to record the device pointer in ptype_get_idx() and ptype_seq_next() so that ptype_seq_show() is safe against concurrent pt->dev changes. We also need to add full RCU protection in ptype_seq_next(). (Missing READ_ONCE() when reading list.next values) Many thanks to Dong Chenchen for providing a repro.

In the Linux kernel, the following vulnerability has been resolved: io_uring/rw: free potentially allocated iovec on cache put failure If a read/write request goes through io_req_rw_cleanup() and has an allocated iovec attached and fails to put to the rw_cache, then it may end up with an unaccounted iovec pointer. Have io_rw_recycle() return whether it recycled the request or not, and use that to gauge whether to free a potential iovec or not.

An issue in the VirtualHost configuration handling/parser component of aaPanel v7.57.0 allows attackers to cause a Regular Expression Denial of Service (ReDoS) via a crafted input.

A stored cross-site scripting (XSS) vulnerability exists in the NotChatbot WebChat widget thru 1.4.4. User-supplied input is not properly sanitized before being stored and rendered in the chat conversation history. This allows an attacker to inject arbitrary JavaScript code which is executed when the chat history is reloaded. The issue is reproducible across multiple independent implementations of the widget, indicating that the vulnerability resides in the product itself rather than in a specific website configuration.

A Cross-Site Scripting (XSS) vulnerability exists in the web-based configuration interface of Zucchetti Axess access control devices, including XA4, X3/X3BIO, X4, X7, and XIO / i-door / i-door+. The vulnerability is caused by improper sanitization of user-supplied input in the dirBrowse parameter of the /file_manager.cgi endpoint.

The WiFi Extender WDR201A (HW V2.1, FW LFMZX28040922V1.02) exposes an unprotected UART interface through accessible hardware pads on the PCB

A command injection vulnerability exists in the web management interface of the WiFi Extender WDR201A (HW V2.1, FW LFMZX28040922V1.02). The adm.cgi endpoint improperly sanitizes user-supplied input provided to a command-related parameter in the sysCMD functionality.

Mura before 10.1.14 allows beanFeed.cfc getQuery sortDirection SQL injection.

Mura before 10.1.14 allows beanFeed.cfc getQuery sortby SQL injection.

An arbitrary file upload vulnerability in aaPanel v7.57.0 allows attackers to execute arbitrary code via uploading a crafted file.

MuraCMS through 10.1.10 contains a CSRF vulnerability in the bundle creation functionality (csettings.cfc createBundle method) that allows unauthenticated attackers to force administrators to create and save site bundles containing sensitive data to publicly accessible directories. This vulnerability enables complete data exfiltration including user accounts, password hashes, form submissions, email lists, plugins, and site content without administrator knowledge. This CSRF vulnerability enables complete data exfiltration from MuraCMS installations without requiring authentication. Attackers can force administrators to unknowingly create site bundles containing sensitive data, which are saved to publicly accessible web directories. The attack executes silently, leaving administrators unaware that confidential information has been compromised and is available for unauthorized download.

Microsoft Dynamics 365 Customer Engagement (on-premises) 1612 (9.0.2.3034) allows the generation of customized reports via raw SQL queries in an upload of a .rdl (Report Definition Language) file; this is then processed by the SQL Server Reporting Service. An account with the privilege Add Reporting Services Reports can upload a malicious rdl file. If the malicious rdl file is already loaded and it is executable by the user, the Add Reporting Services Reports privilege is not required. A malicious actor can trigger the generation of the report, causing the execution of arbitrary SQL commands in the underlying database. Depending on the permissions of the account running SQL Server Reporting Services, the attacker may be able to perform additional actions, such as accessing linked servers or executing operating system commands.

In the Linux kernel, the following vulnerability has been resolved: nvme-fc: release admin tagset if init fails nvme_fabrics creates an NVMe/FC controller in following path: nvmf_dev_write() -> nvmf_create_ctrl() -> nvme_fc_create_ctrl() -> nvme_fc_init_ctrl() nvme_fc_init_ctrl() allocates the admin blk-mq resources right after nvme_add_ctrl() succeeds. If any of the subsequent steps fail (changing the controller state, scheduling connect work, etc.), we jump to the fail_ctrl path, which tears down the controller references but never frees the admin queue/tag set. The leaked blk-mq allocations match the kmemleak report seen during blktests nvme/fc. Check ctrl->ctrl.admin_tagset in the fail_ctrl path and call nvme_remove_admin_tag_set() when it is set so that all admin queue allocations are reclaimed whenever controller setup aborts.

In the Linux kernel, the following vulnerability has been resolved: net: liquidio: Initialize netdev pointer before queue setup In setup_nic_devices(), the netdev is allocated using alloc_etherdev_mq(). However, the pointer to this structure is stored in oct->props[i].netdev only after the calls to netif_set_real_num_rx_queues() and netif_set_real_num_tx_queues(). If either of these functions fails, setup_nic_devices() returns an error without freeing the allocated netdev. Since oct->props[i].netdev is still NULL at this point, the cleanup function liquidio_destroy_nic_device() will fail to find and free the netdev, resulting in a memory leak. Fix this by initializing oct->props[i].netdev before calling the queue setup functions. This ensures that the netdev is properly accessible for cleanup in case of errors. Compile tested only. Issue found using a prototype static analysis tool and code review.

In the Linux kernel, the following vulnerability has been resolved: fbdev: rivafb: fix divide error in nv3_arb() A userspace program can trigger the RIVA NV3 arbitration code by calling the FBIOPUT_VSCREENINFO ioctl on /dev/fb*. When doing so, the driver recomputes FIFO arbitration parameters in nv3_arb(), using state->mclk_khz (derived from the PRAMDAC MCLK PLL) as a divisor without validating it first. In a normal setup, state->mclk_khz is provided by the real hardware and is non-zero. However, an attacker can construct a malicious or misconfigured device (e.g. a crafted/emulated PCI device) that exposes a bogus PLL configuration, causing state->mclk_khz to become zero. Once nv3_get_param() calls nv3_arb(), the division by state->mclk_khz in the gns calculation causes a divide error and crashes the kernel. Fix this by checking whether state->mclk_khz is zero and bailing out before doing the division. The following log reveals it: rivafb: setting virtual Y resolution to 2184 divide error: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 PID: 2187 Comm: syz-executor.0 Not tainted 5.18.0-rc1+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 RIP: 0010:nv3_arb drivers/video/fbdev/riva/riva_hw.c:439 [inline] RIP: 0010:nv3_get_param+0x3ab/0x13b0 drivers/video/fbdev/riva/riva_hw.c:546 Call Trace: nv3CalcArbitration.constprop.0+0x255/0x460 drivers/video/fbdev/riva/riva_hw.c:603 nv3UpdateArbitrationSettings drivers/video/fbdev/riva/riva_hw.c:637 [inline] CalcStateExt+0x447/0x1b90 drivers/video/fbdev/riva/riva_hw.c:1246 riva_load_video_mode+0x8a9/0xea0 drivers/video/fbdev/riva/fbdev.c:779 rivafb_set_par+0xc0/0x5f0 drivers/video/fbdev/riva/fbdev.c:1196 fb_set_var+0x604/0xeb0 drivers/video/fbdev/core/fbmem.c:1033 do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1109 fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1188 __x64_sys_ioctl+0x122/0x190 fs/ioctl.c:856

In the Linux kernel, the following vulnerability has been resolved: net: gro: fix outer network offset The udp GRO complete stage assumes that all the packets inserted the RX have the `encapsulation` flag zeroed. Such assumption is not true, as a few H/W NICs can set such flag when H/W offloading the checksum for an UDP encapsulated traffic, the tun driver can inject GSO packets with UDP encapsulation and the problematic layout can also be created via a veth based setup. Due to the above, in the problematic scenarios, udp4_gro_complete() uses the wrong network offset (inner instead of outer) to compute the outer UDP header pseudo checksum, leading to csum validation errors later on in packet processing. Address the issue always clearing the encapsulation flag at GRO completion time. Such flag will be set again as needed for encapsulated packets by udp_gro_complete().

Next.js is a React framework for building full-stack web applications. Starting in version 16.0.1 and prior to version 16.1.7, `origin: null` was treated as a "missing" origin during Server Action CSRF validation. As a result, requests from opaque contexts (such as sandboxed iframes) could bypass origin verification instead of being validated as cross-origin requests. An attacker could induce a victim browser to submit Server Actions from a sandboxed context, potentially executing state-changing actions with victim credentials (CSRF). This is fixed in version 16.1.7 by treating `'null'` as an explicit origin value and enforcing host/origin checks unless `'null'` is explicitly allowlisted in `experimental.serverActions.allowedOrigins`. If upgrading is not immediately possible, add CSRF tokens for sensitive Server Actions, prefer `SameSite=Strict` on sensitive auth cookies, and/or do not allow `'null'` in `serverActions.allowedOrigins` unless intentionally required and additionally protected.

Next.js is a React framework for building full-stack web applications. Starting in version 16.0.1 and prior to version 16.1.7, in `next dev`, cross-site protection for internal websocket endpoints could treat `Origin: null` as a bypass case even if `allowedDevOrigins` is configured, allowing privacy-sensitive/opaque contexts (for example sandboxed documents) to connect unexpectedly. If a dev server is reachable from attacker-controlled content, an attacker may be able to connect to the HMR websocket channel and interact with dev websocket traffic. This affects development mode only. Apps without a configured `allowedDevOrigins` still allow connections from any origin. The issue is fixed in version 16.1.7 by validating `Origin: null` through the same cross-site origin-allowance checks used for other origins. If upgrading is not immediately possible, do not expose `next dev` to untrusted networks and/or block websocket upgrades to `/_next/webpack-hmr` when `Origin` is `null` at the proxy.

LDAP Account Manager (LAM) is a webfrontend for managing entries (e.g. users, groups, DHCP settings) stored in an LDAP directory. Prior to version 9.5, the PDF export component does not correctly validate uploaded file extensions. This way any file type (including .php files) can be uploaded. With GHSA-w7xq-vjr3-p9cf, an attacker can achieve remote code execution as the web server user. Version 9.5 fixes the issue. Although upgrading is recommended, a workaround would be to make /var/lib/ldap-account-manager/config read-only for the web-server user.

LDAP Account Manager (LAM) is a webfrontend for managing entries (e.g. users, groups, DHCP settings) stored in an LDAP directory. Prior to version 9.5, a local file inclusion was detected in the PDF export that allows users to include local PHP files and this way execute code. In combination with GHSA-88hf-2cjm-m9g8 this allows to execute arbitrary code. Users need to login to LAM to exploit this vulnerability. Version 9.5 fixes the issue. Although upgrading is recommended, a workaround would be to make /var/lib/ldap-account-manager/config read-only for the web-server user and delete the PDF profile files (making PDF exports impossible).

Roxy-WI is a web interface for managing Haproxy, Nginx, Apache and Keepalived servers. Prior to version 8.2.6.3, a command injection vulnerability exists in the `/config/compare/<service>/<server_ip>/show` endpoint, allowed authenticated users to execute arbitrary system commands on the app host. The vulnerability exists in `app/modules/config/config.py` on line 362, where user input is directly formatted in the template string that is eventually executed. Version 8.2.6.3 fixes the issue.

pyOpenSSL is a Python wrapper around the OpenSSL library. Starting in version 22.0.0 and prior to version 26.0.0, if a user provided callback to `set_cookie_generate_callback` returned a cookie value greater than 256 bytes, pyOpenSSL would overflow an OpenSSL provided buffer. Starting in version 26.0.0, cookie values that are too long are now rejected.

A vulnerability was detected in Portabilis i-Educar 2.11. This impacts an unknown function of the file /intranet/educar_servidor_curso_lst.php of the component Endpoint. Performing a manipulation of the argument Name results in cross site scripting. The attack may be initiated remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was identified in TRENDnet TEW-824DRU 1.010B01/1.04B01. The impacted element is the function sub_420A78 of the file apply_sec.cgi of the component Web Interface. Such manipulation of the argument Language leads to cross site scripting. It is possible to launch the attack remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way.

pyOpenSSL is a Python wrapper around the OpenSSL library. Starting in version 0.14.0 and prior to version 26.0.0, if a user provided callback to `set_tlsext_servername_callback` raised an unhandled exception, this would result in a connection being accepted. If a user was relying on this callback for any security-sensitive behavior, this could allow bypassing it. Starting in version 26.0.0, unhandled exceptions now result in rejecting the connection.

Sentry is a developer-first error tracking and performance monitoring tool. Versions prior to 26.1.0 have a cross-organization Insecure Direct Object Reference (IDOR) vulnerability in Sentry's GroupEventJsonView endpoint. Version 26.1.0 patches the issue.

The GLPI Inventory Plugin handles network discovery, inventory, software deployment, and data collection for GLPI agents. Prior to 1.6.6, non sanitized user input can lend to an SQL injection from reports, with adequate rights. This vulnerability is fixed in 1.6.6.

GLPI is a free Asset and IT management software package. Starting in version 11.0.0 and prior to version 11.0.6, a malicious actor with knowledge of a user's credentials can bypass MFA and steal their account. Version 11.0.6 fixes the issue.

Unprotected internal endpoints in Cloud Foundry Capi Release 1.226.0 and below, and CF Deployment v54.9.0 and below on all platforms allows any user who has bypassed the firewall to potentially replace droplets and therefore applications allowing them to access secure application information.

Vulnerability in the Oracle Edge Cloud Infrastructure Designer and Visualisation Toolkit product of Oracle Open Source Projects (component: Desktop). The supported version that is affected is 0.3.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Edge Cloud Infrastructure Designer and Visualisation Toolkit. Successful attacks of this vulnerability can result in takeover of Oracle Edge Cloud Infrastructure Designer and Visualisation Toolkit. CVSS 3.1 Base Score 9.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H).

IBM Sterling B2B Integrator and IBM Sterling File Gateway 6.1.0.0 through 6.1.2.7_2, 6.2.0.0 through 6.2.0.5_1, 6.2.1.0 through 6.2.1.1_1, and 6.2.2.0 allows a remote unauthenticated attacker to view and delete the partners of a community and to delete the communities.

IBM Sterling B2B Integrator and and IBM Sterling File Gateway 6.1.0.0 through 6.1.2.7_2, 6.2.0.0 through 6.2.0.5_1, 6.2.1.0 through 6.2.1.1_1, and 6.2.2.0 could allow an unauthenticated attacker to send a specially crafted request that causes the application to crash.

A cross-origin issue in the Navigation API was addressed with improved input validation. This issue is fixed in Background Security Improvements for iOS, iPadOS, and macOS, Safari 26.4, iOS 18.7.7 and iPadOS 18.7.7, iOS 26.4 and iPadOS 26.4, macOS Tahoe 26.4, visionOS 26.4. Processing maliciously crafted web content may bypass Same Origin Policy.

IBM Db2 Recovery Expert for Linux, UNIX and Windows 5.5 IF 2 could allow an attacker to modify or corrupt data due to an insecure mechanism used for verifying the integrity of the data during transmission.

Further research determined the issue originates from a different product.

Further research determined the issue originates from a different product.

Further research determined the issue originates from a different product.

** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2026-33942. Reason: This candidate is a duplicate of CVE-2026-33942. Notes: All CVE users should reference CVE-2026-33942 instead of this candidate.

IBM i 7.6 could allow a remote attacker to cause a denial of service using failed authentication connections due to improper allocation of resources.

IBM Planning Analytics Local 2.1.0 through 2.1.17 could allow an unauthorized access to sensitive application data and administrative functionalities due to lack of proper access controls.

IBM Planning Analytics Local 2.1.0 through 2.1.17 could allow an attacker to trick the caching mechanism into storing and serving sensitive, user-specific responses as publicly cacheable resources.

Edimax GS-5008PL firmware version 1.00.54 and prior use cleartext HTTP for the web management interface without implementing TLS or SSL encryption. Attackers on the same network can intercept management traffic to capture administrator credentials and sensitive configuration data.

Edimax GS-5008PL firmware version 1.00.54 and prior contain a cross-site request forgery vulnerability that allows remote attackers to perform unauthorized administrative actions by inducing logged-in administrators to visit malicious pages. Attackers can exploit the lack of anti-CSRF tokens and request validation to change passwords, upload firmware, reboot the device, perform factory resets, or modify network configurations.

Edimax GS-5008PL firmware version 1.00.54 and prior contain a stored cross-site scripting vulnerability in the system_name_set.cgi script that allows attackers to inject arbitrary script code by manipulating the sysName parameter. Attackers can send a crafted POST request with malicious script payload that executes when management pages including system_data.js are viewed by administrators.

Edimax GS-5008PL firmware version 1.00.54 and prior contain an insecure credential storage vulnerability that allows attackers to obtain administrator credentials by accessing configuration backup files. Attackers can download the config.bin file through fupload.cgi to extract plaintext username and password fields for unauthorized administrative access.