CVE Feed

In the Linux kernel, the following vulnerability has been resolved: HID: core: fix number/pointer type confusion on long items When fetch_item() is called by hid_scan_report() on an item with HID_ITEM_TAG_LONG, it stores a pointer to the item data in item->data.longdata instead of storing a value directly in item->data.{u8/u16/u32}. When item_udata() or item_sdata() encounters such an item, it incorrectly assumes that the item is in short format, and therefore returns the lower part of a kernel pointer reinterpreted as a number. When a HID device is connected whose descriptor contains a HID_GLOBAL_ITEM_TAG_REPORT_SIZE encoded in long format with size=4, this causes the lower half of a kernel pointer to be printed into dmesg as a number, like this: hid (null): invalid report_size 107953555 To fix it, let item_udata() and item_sdata() verify that the item is in short format. Note that this bug only affects hid_scan_report(), while the main parsing pass hid_parse_collections() will always bail out when encountering a long item. Sidenote: There are currently no users of data.longdata; maybe we should just remove any parsing of long-format descriptors as a follow-up.

In the Linux kernel, the following vulnerability has been resolved: PCI: host-generic: Fix NULL pointer dereference on 32-bit CAM systems On 32-bit systems the config space is too large to ioremap in one go, so pci_ecam_create() maps each bus segment separately and relies on the ->add_bus callback (pci_ecam_add_bus) to populate the per-bus mapping in cfg->winp[]. pci_ecam_map_bus() then uses that mapping as the base for every config access. The generic ECAM ops (pci_generic_ecam_ops) already provide the ->add_bus and ->remove_bus callbacks, but the CAM (legacy) ops in pci-host-generic.c do not. As a result, on a 32-bit host using "pci-host-cam-generic" the per-bus mapping is never set up and the first config read dereferences a NULL base, crashing during bus enumeration: Unable to handle kernel NULL pointer dereference at virtual address 00000800 Oops [#1] CPU: 0 PID: 1 Comm: swapper Not tainted 6.9.7+ #43 Hardware name: Digilent Nexys-Video-A7 RV32 (DT) epc : pci_generic_config_read+0x40/0xb0 ra : pci_generic_config_read+0x2c/0xb0 [<c038db9c>] pci_generic_config_read+0x40/0xb0 [<c038da04>] pci_bus_read_config_dword+0x50/0xb0 [<c0391e94>] pci_bus_generic_read_dev_vendor_id+0x3c/0x1ec [<c039245c>] pci_scan_single_device+0xa4/0x11c [<c0392570>] pci_scan_slot+0x9c/0x23c [<c039388c>] pci_scan_child_bus_extend+0x58/0x2f4 [<c0393db0>] pci_scan_root_bus_bridge+0x64/0xe8 [<c0393e54>] pci_host_probe+0x20/0xc8 [<c03bc6f4>] pci_host_common_probe+0x144/0x1e4 Fix this by giving the CAM ops the same ->add_bus/->remove_bus callbacks. Since pci_ecam_add_bus() and pci_ecam_remove_bus() are static to ecam.c, move the CAM ops definition there as pci_generic_cam_ops (mirroring pci_generic_ecam_ops) and export it for pci-host-generic.c to reference. [mani: removed timestamp from log]

In the Linux kernel, the following vulnerability has been resolved: kcov: fix data corruption and race conditions on PREEMPT_RT syzbot is reporting KCOV state corruption on PREEMPT_RT kernels, for the temporary storage used for saving/restoring remote KCOV state is currently allocated as the per-CPU area. On PREEMPT_RT kernels, softirq handlers run as preemptible task threads (e.g., ksoftirqd). If a softirq context preempts a task running a remote KCOV session, it safely saves the task's state into the per-CPU area. However, if that softirq thread is subsequently preempted by a higher- priority softirq thread on the same CPU, the second softirq will overwrite the same per-CPU area, permanently destroying the original task's KCOV state. Fix this data corruption by moving the temporary storage from the per-CPU area to the per-thread area. Since each softirq thread now owns its own task context, nested softirq preemption no longer causes data overwrites. Note that while the temporary storage is now on a per-thread basis, the per-CPU kcov_percpu_data.lock must be retained, for we need to ensure that kcov_remote_start() and kcov_remote_stop() operate atomically without racing against asynchronous interrupts that manipulate the current task's KCOV state. It is likely that GFP_KERNEL allocation by vmalloc_node() in kcov_init() has already called panic() before returning NULL, for there will be no OOM-killable userspace processes when __init function of built-in module runs. But this patch also fixes crashing the kernel when vmalloc_node() in kcov_init() returned NULL, for kcov_init() left per-CPU irq_area == NULL but kcov_remote_start() depends on per-CPU irq_area != NULL, resulting in (1) doing vmalloc() in kcov_remote_start() despite !in_task() context (2) out-of-array-bounds access if (1) succeeded but kcov->remote_size < CONFIG_KCOV_IRQ_AREA_SIZE (3) always leak memory allocated by (1), eventually killing all OOM-killable userspace processes problems.

In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix DPT allocation paths. Remove the fallback for VRAM to system memory, I tested it and that doesn't work at all, only a black screen with pipe fault errors were observed. On systems with media GT, extra latency is added when accessing stolen memory when the GT is in MC6. Since we additionally aren't counting how much memory is used for stolen and we could in theory fill up the entire stolen area with DPT's, avoid using stolen and only use the default memory region. Using stolen may also result in random system hangs under load. (cherry picked from commit a196406a3831291598fe8e73245914f7acffdfe0)

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix use-after-free of listener socket in iso_conn_ready iso_conn_ready() looks up the BIS listener socket with iso_get_sock(), which takes a reference, and then, without re-checking its state, creates a child socket from it: parent = iso_get_sock(hdev, ...); if (!parent) return; lock_sock(parent); sk = iso_sock_alloc(sock_net(parent), NULL, BTPROTO_ISO, ...); ... iso_chan_add(conn, sk, parent); ... release_sock(parent); sock_put(parent); If the listener socket is closed concurrently, between iso_get_sock() and lock_sock(), the reference taken by iso_get_sock() may be the last one: the close path drops the link-list reference, and once iso_conn_ready() drops its own reference at the end of the function the socket is freed. The child socket, however, is already linked to the freed parent, and a later disconnect of the child runs iso_chan_del() -> bt_accept_unlink(), which dereferences the dangling parent pointer into the freed accept queue (a use-after-free). The same dangling pointer is also dereferenced through parent->***() in iso_chan_del(). Fix it the same way the connected (non-BIS) path was fixed in commit 0d255e63fcf3 ("Bluetooth: ISO: hold sk properly in iso_conn_ready"): after taking the socket lock, re-check that the parent is still a listening, alive socket, and bail out otherwise.

MantisBT is an open source bug tracker. Versions 2.28.3 and earlier contain a critical authentication bypass in the SOAP API's mci_check_login() function. Any user knowing any valid cookie_string can authenticate as any other user (knowing their username), including the administrator, without knowing the target's password. The vulnerability is exploitable with zero prior access on default MantisBT installations because self-registration is enabled by default ($g_allow_signup = ON). A self-registered user can use their own cookie_string (readable from their browser's MANTIS_STRING_COOKIE cookie after login) to impersonate the administrator via the SOAP API. The REST API is NOT affected. The REST API's AuthMiddleware derives the username server-side from the API token or session cookie, so the username cannot be spoofed. The Web UI is NOT affected. The Web UI authenticates via PHP session cookies (PHPSESSID) and validates the MANTIS_STRING_COOKIE against the logged-in user through auth_is_cookie_valid(). The username is derived server-side from the cookie, not supplied by the client. Version 2.28.4 contains a patch. No known workarounds are available.

Dell iDRAC9, 14G versions prior to 7.00.00.184, 15G/16G versions prior to 7.30.10.50, and Dell iDRAC10, 17G versions prior to 1.30.30.50, contain an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to command injection.

Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to script injection.

A vulnerability in cPanel allows a mail-enabled account to achieve remote code execution as root through SQLi in EmailTrack component

Cash Collect contains an improper authorization vulnerability in the Sage AR Automation API. Administrative functions do not properly verify user privileges, allowing authenticated low-privileged users to create administrator accounts and obtain elevated privileges.

Cash Collect contains an improper authorization vulnerability in the Sage AR Automation API. Insufficient tenant-level authorization checks allow authenticated users to access administrative resources belonging to other tenants by specifying a valid non predictable tenant identifier.

eprosima Fast DDS is a C++ implementation of the DDS (Data Distribution Service) standard of the OMG (Object Management Group). Prior to versions 2.6.12, 2.14.6, 3.2.4, and 3.4.3, Fast DDS’s implementation of SQL‑based content filtering (DDSSQLFilter) allows any participant in a DDS domain to remotely crash other Fast DDS participants by sending a single crafted SEDP `DATA` submessage whose `PID_CONTENT_FILTER_PROPERTY.filterExpression` contains a deeply nested filter expression. Versions 2.6.12, 2.14.6, 3.2.4, and 3.4.3 fix the issue.

eprosima Fast DDS is a C++ implementation of the DDS (Data Distribution Service) standard of the OMG (Object Management Group). Versions prior to 2.6.12, 2.14.6, 3.2.4, 3.3.1, and 3.4.2 have a remotely triggerable Out-of-Bounds Read while processing RTPS `DATA_FRAG` submessages. An attacker can craft a `DATA_FRAG` with a large `sampleSize` but a small actual payload, and set `fragmentsInSubmessage` such that the receiver treats the packet as the LAST fragment**. In this LAST-fragment path, Fast-DDS computes `incoming_length` based on `sampleSize` and calls `memcpy()` without validating `incoming_data.length >= incoming_length`. As a result, `CacheChange_t::add_fragments()` reads past the received UDP datagram buffer and into adjacent heap memory, copying those bytes into the reassembly buffer. In a Discovery Server deployment, the resulting `CacheChange_t` can be relayed to other participants, meaning that a newly joining participant may receive leaked heap memory (e.g., pointer values that could aid ASLR bypass). Versions 2.6.12, 2.14.6, 3.2.4, 3.3.1, and 3.4.2 fix the issue.

Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to command execution.

After spoofing the device and obtaining one user confirmation, an attacker may be able to cause the application to transmit firmware through an unauthenticated and unsigned update channel.

An attacker could derive the camera's Wi-Fi password and connect to its wireless network. This weakens or eliminates the security value of the access-point password and may expose the live video stream, device services, status interfaces, and firmware-update functionality.

Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to command execution.

An attacker could impersonate the camera and place themselves in a man-in-the-middle or device-emulation position. This permits manipulation of device status responses, observation of application requests, and potential triggering of firmware-update behavior.

Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to command execution.

The C6 ear camera transmits live video to the EarVision Android application over unencrypted UDP streams. The application manifest permits cleartext traffic, and captured network traffic contains reconstructable JPEG or WEBP video frames transmitted over UDP. An attacker within local wireless range may capture and reconstruct the live video stream without transport encryption.

Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Use of Hard-coded Cryptographic Key vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to information disclosure.

Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains a Least Privilege Violation vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to unauthorized access.

Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Execution with Unnecessary Privileges vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to unauthorized access.

Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains a Least Privilege Violation vulnerability. A high privileged attacker with local access could potentially exploit this vulnerability, leading to unauthorized access.

Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Neutralization of Alternate XSS Syntax vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to script injection.

Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to script injection.

Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to script injection.

Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Neutralization of Special Elements used in a Command ('Command Injection') vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to script injection.

Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Certificate Validation vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to unauthorized access.

A user could provide an expression whose string length is longer than the ParserExpressionSizeLimit() configured on the CEL environment, and a memory allocation would occur proportional to the size of the input before the limit would be checked / enforced.

Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Certificate Validation vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to unauthorized access.

Rara One Click Demo Import plugin for WordPress before 1.3.5 contains an arbitrary file upload vulnerability that allows authenticated attackers with Administrator privileges to upload arbitrary PHP files by passing a false value to wp_handle_upload() that disables WordPress core's file type validation checks across all three file parameters in the process_uploaded_files() function. Attackers can upload a malicious PHP file to the uploads directory and execute it over HTTP to achieve remote code execution in the web server process, with the uploaded file persisting on disk even after plugin deactivation and leaving no media library record to evade standard integrity checks.

Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Certificate Validation vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to unauthorized access.

Dell Secure Connect Gateway (SCG) 5.0 Appliance, versions prior to 5.36.00.xx, contains an Improper Certificate Validation vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to protection mechanism bypass.

Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to command execution.

zstd-jni versions before 1.5.7-14 fail to validate closed state in setDict, setLongMax, setLevel and setRefMultipleDDicts methods of stream classes. Attackers can call these methods on closed streams to write through freed native pointers, corrupting unrelated objects or crashing the JVM.

zstd-jni before 1.5.7-14 contains a use-after-free vulnerability where streams and contexts hold a dictionary's shared lock only during the load call, allowing the dictionary to be closed while still referenced. Attackers can close a dictionary after associating it with a stream or context, causing subsequent read or write operations to access freed native memory, resulting in silent data corruption or JVM crashes.

zstd-jni before 1.5.7-14 fails to validate the samples buffer capacity in Zstd.trainFromBufferDirect, allowing attackers to read past buffer boundaries by supplying oversized per-sample lengths. Attackers can trigger out-of-bounds memory access by providing crafted sample length arrays that cause the native implementation to walk past the buffer allocation, resulting in JVM termination.

zstd-jni before 1.5.7-14 performs 32-bit signed bounds checks on three direct-ByteBuffer frame-size native methods, allowing out-of-bounds memory reads via negative or overflowing offsets. Attackers can supply negative offset values near Integer.MIN_VALUE to read unmapped memory, causing JVM termination or extracting arbitrary frame size data from unintended memory locations.

t-digest versions 3.1 through 3.3 fail to validate centroid means during deserialization in MergingDigest.fromBytes, allowing attackers to inject NaN values that bypass validation checks. Attackers can craft malicious serialized digests containing NaN centroids that degrade sorting performance from O(n log n) to O(n squared), causing severe processing delays during merge operations.

A flaw was found in the OCAPI modules (ocapi_command, ocapi_info) of the community.general Ansible collection. The shared OCAPI request helper disables TLS certificate validation on every request and the modules expose no parameter to re-enable it, while sending HTTP Basic-Auth credentials to an https endpoint. An attacker positioned on the network path between the Ansible controller and the OCAPI-managed storage/enclosure device can present any certificate, intercept the session, capture the credentials, and tamper with responses.

A flaw was found in FreeIPA. An unauthenticated remote attacker could exploit a DOM Cross-Site Scripting (XSS) vulnerability in the FreeIPA/IdM Web UI password reset page. By enticing a victim to click a specially crafted link and complete a password reset, the attacker could inject and execute arbitrary JavaScript code. This allows the attacker to perform actions within the victim's authenticated session, potentially leading to full administrative control if an IdM administrator is targeted.

A flaw was found in SSSD's IdP authentication provider. The eval_access_token_buf() function compares the OIDC subject identifier using strncmp() with the authenticated user's identifier length, performing a prefix comparison instead of an exact match. An attacker whose IdP identifier is a strict prefix of a target user's identifier can authenticate as the target user.

Incorrect Permission Assignment for Critical Resource vulnerability in TÜBİTAK BİLGEM Software Technologies Research Institute Pardus LightDM Greeter allows Exploiting Incorrectly Configured Access Control Security Levels. This issue affects Pardus LightDM Greeter: before 0.4.15.

IP2Location Country Blocker plugin for WordPress before 2.45.0 contains an access control bypass vulnerability that allows unauthenticated remote attackers to circumvent IP-based restrictions by forging the X-Real-IP HTTP header. Attackers can set the X-Real-IP header to an allowlisted IP address to bypass page, link, or site-wide access restrictions and access otherwise-blocked resources.

Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Certificate Validation vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to protection mechanism bypass.

Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Use of Hard-coded Credentials vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to information exposure.

tirreno, a security framework, has a session fixation issue in versions prior to 0.10.0. During authentication, tirreno validates the user's credentials and establishes the authenticated session, but it does not call `session_regenerate_id()` afterward. As a result, the session identifier is not rotated on login, it stays the same before and after authentication. An attacker able to fix a known session identifier in a victim's browser (for example through a network man-in-the-middle position, or a separate cross-site scripting or subdomain cookie-injection issue) could then gain access to the victim's authenticated session. The issue is fixed in v0.10.0. The session identifier is now regenerated on successful authentication, and the previous session is destroyed. There is no configuration-level workaround.

Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Use of Hard-coded Credentials vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to information exposure.

knowns (npm package) versions <= 0.29.1 contain a path traversal vulnerability in the Document API. The HTTP handler in internal/server/routes/docs.go normalizes the user-supplied document path with cleanDocPath(), which strips leading/trailing slashes and the .md suffix but does not neutralize ../ traversal sequences, and internal/storage/doc_store.go then builds the target path with filepath.Join(ds.docsDir(), filepath.FromSlash(doc.Path)+".md") without verifying that the resolved path remains inside the documents directory. In the default deployment, where the Management API is unauthenticated and bound to all interfaces, a remote unauthenticated attacker can supply a traversal payload (for example {"path": "../../../../tmp/knowns_pwn_marker"} to POST /api/docs, or an encoded path to GET /api/docs/...) to read, create, overwrite, or delete arbitrary files with a .md extension anywhere on the host filesystem and to create arbitrary directories via os.MkdirAll. This can expose sensitive data stored in other projects' documentation, corrupt or destroy files, and provide an arbitrary-write primitive that may be chained toward code execution. The issue is fixed in version 0.30.0.